ArmPlatformPkg/ArmVExpressPkg/ArmVExpress-RTSM-A9x4.fdf

   1 #
   2 #  Copyright (c) 2011, ARM Limited. All rights reserved.
   3 #
   4 #  This program and the accompanying materials
   5 #  are licensed and made available under the terms and conditions of the BSD License
   6 #  which accompanies this distribution.  The full text of the license may be found at
   7 #  http://opensource.org/licenses/bsd-license.php
   8 #
   9 #  THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
  10 #  WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
  11 #
  12
  13 ################################################################################
  14 #
  15 # FD Section
  16 # The [FD] Section is made up of the definition statements and a
  17 # description of what goes into  the Flash Device Image.  Each FD section
  18 # defines one flash "device" image.  A flash device image may be one of
  19 # the following: Removable media bootable image (like a boot floppy
  20 # image,) an Option ROM image (that would be "flashed" into an add-in
  21 # card,) a System "Flash"  image (that would be burned into a system's
  22 # flash) or an Update ("Capsule") image that will be used to update and
  23 # existing system flash.
  24 #
  25 ################################################################################
  26
  27 [FD.RTSM_VE_Cortex-A9_EFI]
  28 BaseAddress   = 0x08000000|gArmTokenSpaceGuid.PcdFdBaseAddress  # The base address of the Firmware in NOR Flash.
  29 Size          = 0x00280000|gArmTokenSpaceGuid.PcdFdSize         # The size in bytes of the FLASH Device
  30 ErasePolarity = 1
  31
  32 # This one is tricky, it must be: BlockSize * NumBlocks = Size
  33 BlockSize     = 0x00001000
  34 NumBlocks     = 0x280
  35
  36 ################################################################################
  37 #
  38 # Following are lists of FD Region layout which correspond to the locations of different
  39 # images within the flash device.
  40 #
  41 # Regions must be defined in ascending order and may not overlap.
  42 #
  43 # A Layout Region start with a eight digit hex offset (leading "0x" required) followed by
  44 # the pipe "|" character, followed by the size of the region, also in hex with the leading
  45 # "0x" characters. Like:
  46 # Offset|Size
  47 # PcdOffsetCName|PcdSizeCName
  48 # RegionType <FV, DATA, or FILE>
  49 #
  50 ################################################################################
  51
  52 0x00000000|0x00080000
  53 gArmTokenSpaceGuid.PcdSecureFvBaseAddress|gArmTokenSpaceGuid.PcdSecureFvBaseSize
  54 FV = FVMAIN_SEC
  55
  56 0x00080000|0x00280000
  57 gArmTokenSpaceGuid.PcdFvBaseAddress|gArmTokenSpaceGuid.PcdFvBaseSize
  58 FV = FVMAIN_COMPACT
  59
  60
  61 ################################################################################
  62 #
  63 # FV Section
  64 #
  65 # [FV] section is used to define what components or modules are placed within a flash
  66 # device file.  This section also defines order the components and modules are positioned
  67 # within the image.  The [FV] section consists of define statements, set statements and
  68 # module statements.
  69 #
  70 ################################################################################
  71
  72 [FV.FVMAIN_SEC]
  73 FvAlignment        = 8
  74 ERASE_POLARITY     = 1
  75 MEMORY_MAPPED      = TRUE
  76 STICKY_WRITE       = TRUE
  77 LOCK_CAP           = TRUE
  78 LOCK_STATUS        = TRUE
  79 WRITE_DISABLED_CAP = TRUE
  80 WRITE_ENABLED_CAP  = TRUE
  81 WRITE_STATUS       = TRUE
  82 WRITE_LOCK_CAP     = TRUE
  83 WRITE_LOCK_STATUS  = TRUE
  84 READ_DISABLED_CAP  = TRUE
  85 READ_ENABLED_CAP   = TRUE
  86 READ_STATUS        = TRUE
  87 READ_LOCK_CAP      = TRUE
  88 READ_LOCK_STATUS   = TRUE
  89
  90   INF ArmPlatformPkg/Sec/Sec.inf
  91
  92
  93 [FV.FvMain]
  94 BlockSize          = 0x40
  95 NumBlocks          = 0         # This FV gets compressed so make it just big enough
  96 FvAlignment        = 8         # FV alignment and FV attributes setting.
  97 ERASE_POLARITY     = 1
  98 MEMORY_MAPPED      = TRUE
  99 STICKY_WRITE       = TRUE
 100 LOCK_CAP           = TRUE
 101 LOCK_STATUS        = TRUE
 102 WRITE_DISABLED_CAP = TRUE
 103 WRITE_ENABLED_CAP  = TRUE
 104 WRITE_STATUS       = TRUE
 105 WRITE_LOCK_CAP     = TRUE
 106 WRITE_LOCK_STATUS  = TRUE
 107 READ_DISABLED_CAP  = TRUE
 108 READ_ENABLED_CAP   = TRUE
 109 READ_STATUS        = TRUE
 110 READ_LOCK_CAP      = TRUE
 111 READ_LOCK_STATUS   = TRUE
 112
 113   INF MdeModulePkg/Core/Dxe/DxeMain.inf
 114
 115   #
 116   # PI DXE Drivers producing Architectural Protocols (EFI Services)
 117   #
 118   INF ArmPkg/Drivers/CpuDxe/CpuDxe.inf
 119   INF MdeModulePkg/Core/RuntimeDxe/RuntimeDxe.inf
 120   INF MdeModulePkg/Universal/SecurityStubDxe/SecurityStubDxe.inf
 121   INF MdeModulePkg/Universal/CapsuleRuntimeDxe/CapsuleRuntimeDxe.inf
 122   INF MdeModulePkg/Universal/Variable/RuntimeDxe/VariableRuntimeDxe.inf
 123   INF MdeModulePkg/Universal/FaultTolerantWriteDxe/FaultTolerantWriteDxe.inf
 124   INF MdeModulePkg/Universal/MonotonicCounterRuntimeDxe/MonotonicCounterRuntimeDxe.inf
 125   INF EmbeddedPkg/ResetRuntimeDxe/ResetRuntimeDxe.inf
 126   INF EmbeddedPkg/RealTimeClockRuntimeDxe/RealTimeClockRuntimeDxe.inf
 127   INF EmbeddedPkg/MetronomeDxe/MetronomeDxe.inf
 128
 129   INF MdeModulePkg/Universal/HiiDatabaseDxe/HiiDatabaseDxe.inf
 130
 131   #
 132   # Multiple Console IO support
 133   #
 134   INF MdeModulePkg/Universal/Console/ConPlatformDxe/ConPlatformDxe.inf
 135   INF MdeModulePkg/Universal/Console/ConSplitterDxe/ConSplitterDxe.inf
 136   INF MdeModulePkg/Universal/Console/GraphicsConsoleDxe/GraphicsConsoleDxe.inf
 137   INF MdeModulePkg/Universal/Console/TerminalDxe/TerminalDxe.inf
 138   INF EmbeddedPkg/SerialDxe/SerialDxe.inf
 139
 140   INF ArmPkg/Drivers/PL390Gic/PL390GicDxe.inf
 141   INF ArmPlatformPkg/Drivers/SP804TimerDxe/SP804TimerDxe.inf
 142   INF ArmPlatformPkg/Drivers/NorFlashDxe/NorFlashDxe.inf
 143   INF ArmPlatformPkg/Drivers/LcdGraphicsOutputDxe/PL111LcdGraphicsOutputDxe.inf
 144   INF ArmPlatformPkg/Drivers/SP805WatchdogDxe/SP805WatchdogDxe.inf
 145
 146   #
 147   # Semi-hosting filesystem
 148   #
 149   INF ArmPkg/Filesystem/SemihostFs/SemihostFs.inf
 150
 151   #
 152   # FAT filesystem + GPT/MBR partitioning
 153   #
 154   INF MdeModulePkg/Universal/Disk/DiskIoDxe/DiskIoDxe.inf
 155   INF MdeModulePkg/Universal/Disk/PartitionDxe/PartitionDxe.inf
 156   INF FatPkg/EnhancedFatDxe/Fat.inf
 157   INF MdeModulePkg/Universal/Disk/UnicodeCollation/EnglishDxe/EnglishDxe.inf
 158
 159   #
 160   # Multimedia Card Interface
 161   #
 162   INF EmbeddedPkg/Universal/MmcDxe/MmcDxe.inf
 163   INF ArmPlatformPkg/Drivers/PL180MciDxe/PL180MciDxe.inf
 164
 165   #
 166   # UEFI application (Shell Embedded Boot Loader)
 167   #
 168   INF EmbeddedPkg/Ebl/Ebl.inf
 169
 170   #
 171   # UEFI application (Full EFI Shell)
 172   #
 173   FILE APPLICATION = PCD(gArmTokenSpaceGuid.PcdShellFile) {
 174     SECTION PE32 = EdkShellBinPkg/FullShell/Arm/ShellFull.efi
 175     SECTION UI      = "ShellFull"
 176   }
 177
 178 !if $(EDK2_ARMVE_UEFI2_SHELL) == 1
 179   INF ShellPkg/Application/Shell/Shell.inf
 180 !endif
 181   #
 182   # UEFI application (Test Variable Services)
 183   #
 184   INF ArmPkg/Application/VariableServicesTest/VariableServicesTest.inf
 185
 186   #
 187   # Bds
 188   #
 189   INF MdeModulePkg/Universal/DevicePathDxe/DevicePathDxe.inf
 190   INF ArmPlatformPkg/Bds/Bds.inf
 191
 192
 193 [FV.FVMAIN_COMPACT]
 194 FvAlignment        = 8
 195 ERASE_POLARITY     = 1
 196 MEMORY_MAPPED      = TRUE
 197 STICKY_WRITE       = TRUE
 198 LOCK_CAP           = TRUE
 199 LOCK_STATUS        = TRUE
 200 WRITE_DISABLED_CAP = TRUE
 201 WRITE_ENABLED_CAP  = TRUE
 202 WRITE_STATUS       = TRUE
 203 WRITE_LOCK_CAP     = TRUE
 204 WRITE_LOCK_STATUS  = TRUE
 205 READ_DISABLED_CAP  = TRUE
 206 READ_ENABLED_CAP   = TRUE
 207 READ_STATUS        = TRUE
 208 READ_LOCK_CAP      = TRUE
 209 READ_LOCK_STATUS   = TRUE
 210
 211 !if $(EDK2_SKIP_PEICORE) == 1
 212   INF ArmPlatformPkg/PrePi/PeiMPCore.inf
 213 !else
 214   INF ArmPlatformPkg/PrePeiCore/PrePeiCoreMPCore.inf
 215   INF MdeModulePkg/Core/Pei/PeiMain.inf
 216   INF ArmPlatformPkg/PlatformPei/PlatformPeim.inf
 217   INF ArmPlatformPkg/MemoryInitPei/MemoryInitPeim.inf
 218   INF ArmPkg/Drivers/CpuPei/CpuPei.inf
 219   INF MdeModulePkg/Universal/PCD/Pei/Pcd.inf
 220   INF IntelFrameworkModulePkg/Universal/StatusCode/Pei/StatusCodePei.inf
 221   INF MdeModulePkg/Universal/Variable/Pei/VariablePei.inf
 222   INF MdeModulePkg/Core/DxeIplPeim/DxeIpl.inf
 223 !endif
 224
 225   FILE FV_IMAGE = 9E21FD93-9C72-4c15-8C4B-E77F1DB2D792 {
 226     SECTION GUIDED EE4E5898-3914-4259-9D6E-DC7BD79403CF PROCESSING_REQUIRED = TRUE {
 227       SECTION FV_IMAGE = FVMAIN
 228     }
 229   }
 230
 231
 232 ################################################################################
 233 #
 234 # Rules are use with the [FV] section's module INF type to define
 235 # how an FFS file is created for a given INF file. The following Rule are the default
 236 # rules for the different module type. User can add the customized rules to define the
 237 # content of the FFS file.
 238 #
 239 ################################################################################
 240
 241
 242 ############################################################################
 243 # Example of a DXE_DRIVER FFS file with a Checksum encapsulation section   #
 244 ############################################################################
 245 #
 246 #[Rule.Common.DXE_DRIVER]
 247 #  FILE DRIVER = $(NAMED_GUID) {
 248 #    DXE_DEPEX    DXE_DEPEX               Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
 249 #    COMPRESS PI_STD {
 250 #      GUIDED {
 251 #        PE32     PE32                    $(INF_OUTPUT)/$(MODULE_NAME).efi
 252 #        UI       STRING="$(MODULE_NAME)" Optional
 253 #        VERSION  STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
 254 #      }
 255 #    }
 256 #  }
 257 #
 258 ############################################################################
 259
 260 [Rule.Common.SEC]
 261   FILE SEC = $(NAMED_GUID) RELOCS_STRIPPED {
 262     TE  TE    Align = 32                $(INF_OUTPUT)/$(MODULE_NAME).efi
 263   }
 264
 265 [Rule.Common.PEI_CORE]
 266   FILE PEI_CORE = $(NAMED_GUID) {
 267     TE     TE                           $(INF_OUTPUT)/$(MODULE_NAME).efi
 268     UI     STRING ="$(MODULE_NAME)" Optional
 269   }
 270
 271 [Rule.Common.PEIM]
 272   FILE PEIM = $(NAMED_GUID) {
 273      PEI_DEPEX PEI_DEPEX Optional       $(INF_OUTPUT)/$(MODULE_NAME).depex
 274      TE       TE                        $(INF_OUTPUT)/$(MODULE_NAME).efi
 275      UI       STRING="$(MODULE_NAME)" Optional
 276   }
 277
 278 [Rule.Common.PEIM.TIANOCOMPRESSED]
 279   FILE PEIM = $(NAMED_GUID) DEBUG_MYTOOLS_IA32 {
 280     PEI_DEPEX PEI_DEPEX Optional        $(INF_OUTPUT)/$(MODULE_NAME).depex
 281     GUIDED A31280AD-481E-41B6-95E8-127F4C984779 PROCESSING_REQUIRED = TRUE {
 282       PE32      PE32                    $(INF_OUTPUT)/$(MODULE_NAME).efi
 283       UI        STRING="$(MODULE_NAME)" Optional
 284     }
 285   }
 286
 287 [Rule.Common.DXE_CORE]
 288   FILE DXE_CORE = $(NAMED_GUID) {
 289     PE32     PE32                       $(INF_OUTPUT)/$(MODULE_NAME).efi
 290     UI       STRING="$(MODULE_NAME)" Optional
 291   }
 292
 293 [Rule.Common.UEFI_DRIVER]
 294   FILE DRIVER = $(NAMED_GUID) {
 295     DXE_DEPEX    DXE_DEPEX              Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
 296     PE32         PE32                   $(INF_OUTPUT)/$(MODULE_NAME).efi
 297     UI           STRING="$(MODULE_NAME)" Optional
 298   }
 299
 300 [Rule.Common.DXE_DRIVER]
 301   FILE DRIVER = $(NAMED_GUID) {
 302     DXE_DEPEX    DXE_DEPEX              Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
 303     PE32         PE32                   $(INF_OUTPUT)/$(MODULE_NAME).efi
 304     UI           STRING="$(MODULE_NAME)" Optional
 305   }
 306
 307 [Rule.Common.DXE_RUNTIME_DRIVER]
 308   FILE DRIVER = $(NAMED_GUID) {
 309     DXE_DEPEX    DXE_DEPEX              Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
 310     PE32         PE32                   $(INF_OUTPUT)/$(MODULE_NAME).efi
 311     UI           STRING="$(MODULE_NAME)" Optional
 312   }
 313
 314 [Rule.Common.UEFI_APPLICATION]
 315   FILE APPLICATION = $(NAMED_GUID) {
 316     UI     STRING ="$(MODULE_NAME)" Optional
 317     PE32   PE32                         $(INF_OUTPUT)/$(MODULE_NAME).efi
 318   }