ArmPlatformPkg/ArmVExpressPkg/ArmVExpress-RTSM-AEMv8Ax4-foundation.fdf

   1 #
   2 #  Copyright (c) 2011, 2013, ARM Limited. All rights reserved.
   3 #
   4 #  This program and the accompanying materials
   5 #  are licensed and made available under the terms and conditions of the BSD License
   6 #  which accompanies this distribution.  The full text of the license may be found at
   7 #  http://opensource.org/licenses/bsd-license.php
   8 #
   9 #  THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
  10 #  WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
  11 #
  12
  13 ################################################################################
  14 #
  15 # FD Section
  16 # The [FD] Section is made up of the definition statements and a
  17 # description of what goes into  the Flash Device Image.  Each FD section
  18 # defines one flash "device" image.  A flash device image may be one of
  19 # the following: Removable media bootable image (like a boot floppy
  20 # image,) an Option ROM image (that would be "flashed" into an add-in
  21 # card,) a System "Flash"  image (that would be burned into a system's
  22 # flash) or an Update ("Capsule") image that will be used to update and
  23 # existing system flash.
  24 #
  25 ################################################################################
  26
  27 [FD.RTSM_VE_Foundationv8_EFI]
  28 BaseAddress   = 0xA0000000|gArmTokenSpaceGuid.PcdFdBaseAddress  # The base address of the Firmware in RAM (Foundation model has no NOR Flash).
  29 Size          = 0x00300000|gArmTokenSpaceGuid.PcdFdSize         # The size in bytes of the FLASH Device
  30 ErasePolarity = 1
  31
  32 # This one is tricky, it must be: BlockSize * NumBlocks = Size
  33 BlockSize     = 0x00001000
  34 NumBlocks     = 0x300
  35
  36 ################################################################################
  37 #
  38 # Following are lists of FD Region layout which correspond to the locations of different
  39 # images within the flash device.
  40 #
  41 # Regions must be defined in ascending order and may not overlap.
  42 #
  43 # A Layout Region start with a eight digit hex offset (leading "0x" required) followed by
  44 # the pipe "|" character, followed by the size of the region, also in hex with the leading
  45 # "0x" characters. Like:
  46 # Offset|Size
  47 # PcdOffsetCName|PcdSizeCName
  48 # RegionType <FV, DATA, or FILE>
  49 #
  50 ################################################################################
  51
  52 0x00000000|0x00080000
  53 gArmTokenSpaceGuid.PcdSecureFvBaseAddress|gArmTokenSpaceGuid.PcdSecureFvSize
  54 FV = FVMAIN_SEC
  55
  56 0x00080000|0x00280000
  57 gArmTokenSpaceGuid.PcdFvBaseAddress|gArmTokenSpaceGuid.PcdFvSize
  58 FV = FVMAIN_COMPACT
  59
  60
  61 ################################################################################
  62 #
  63 # FV Section
  64 #
  65 # [FV] section is used to define what components or modules are placed within a flash
  66 # device file.  This section also defines order the components and modules are positioned
  67 # within the image.  The [FV] section consists of define statements, set statements and
  68 # module statements.
  69 #
  70 ################################################################################
  71
  72 [FV.FVMAIN_SEC]
  73 FvAlignment        = 16
  74 ERASE_POLARITY     = 1
  75 MEMORY_MAPPED      = TRUE
  76 STICKY_WRITE       = TRUE
  77 LOCK_CAP           = TRUE
  78 LOCK_STATUS        = TRUE
  79 WRITE_DISABLED_CAP = TRUE
  80 WRITE_ENABLED_CAP  = TRUE
  81 WRITE_STATUS       = TRUE
  82 WRITE_LOCK_CAP     = TRUE
  83 WRITE_LOCK_STATUS  = TRUE
  84 READ_DISABLED_CAP  = TRUE
  85 READ_ENABLED_CAP   = TRUE
  86 READ_STATUS        = TRUE
  87 READ_LOCK_CAP      = TRUE
  88 READ_LOCK_STATUS   = TRUE
  89
  90   INF ArmPlatformPkg/Sec/Sec.inf
  91
  92
  93 [FV.FvMain]
  94 BlockSize          = 0x40
  95 NumBlocks          = 0         # This FV gets compressed so make it just big enough
  96 FvAlignment        = 16        # FV alignment and FV attributes setting.
  97 ERASE_POLARITY     = 1
  98 MEMORY_MAPPED      = TRUE
  99 STICKY_WRITE       = TRUE
 100 LOCK_CAP           = TRUE
 101 LOCK_STATUS        = TRUE
 102 WRITE_DISABLED_CAP = TRUE
 103 WRITE_ENABLED_CAP  = TRUE
 104 WRITE_STATUS       = TRUE
 105 WRITE_LOCK_CAP     = TRUE
 106 WRITE_LOCK_STATUS  = TRUE
 107 READ_DISABLED_CAP  = TRUE
 108 READ_ENABLED_CAP   = TRUE
 109 READ_STATUS        = TRUE
 110 READ_LOCK_CAP      = TRUE
 111 READ_LOCK_STATUS   = TRUE
 112
 113   INF MdeModulePkg/Core/Dxe/DxeMain.inf
 114
 115   #
 116   # PI DXE Drivers producing Architectural Protocols (EFI Services)
 117   #
 118   INF ArmPkg/Drivers/CpuDxe/CpuDxe.inf
 119   INF MdeModulePkg/Core/RuntimeDxe/RuntimeDxe.inf
 120   INF MdeModulePkg/Universal/SecurityStubDxe/SecurityStubDxe.inf
 121   INF MdeModulePkg/Universal/CapsuleRuntimeDxe/CapsuleRuntimeDxe.inf
 122   INF MdeModulePkg/Universal/Variable/EmuRuntimeDxe/EmuVariableRuntimeDxe.inf
 123   INF MdeModulePkg/Universal/FaultTolerantWriteDxe/FaultTolerantWriteDxe.inf
 124   INF MdeModulePkg/Universal/MonotonicCounterRuntimeDxe/MonotonicCounterRuntimeDxe.inf
 125   INF EmbeddedPkg/ResetRuntimeDxe/ResetRuntimeDxe.inf
 126   INF EmbeddedPkg/RealTimeClockRuntimeDxe/RealTimeClockRuntimeDxe.inf
 127   INF EmbeddedPkg/MetronomeDxe/MetronomeDxe.inf
 128
 129   INF MdeModulePkg/Universal/HiiDatabaseDxe/HiiDatabaseDxe.inf
 130
 131   #
 132   # Multiple Console IO support
 133   #
 134   INF MdeModulePkg/Universal/Console/ConPlatformDxe/ConPlatformDxe.inf
 135   INF MdeModulePkg/Universal/Console/ConSplitterDxe/ConSplitterDxe.inf
 136   INF MdeModulePkg/Universal/Console/GraphicsConsoleDxe/GraphicsConsoleDxe.inf
 137   INF MdeModulePkg/Universal/Console/TerminalDxe/TerminalDxe.inf
 138   INF EmbeddedPkg/SerialDxe/SerialDxe.inf
 139
 140   INF ArmPkg/Drivers/PL390Gic/PL390GicDxe.inf
 141   INF ArmPkg/Drivers/TimerDxe/TimerDxe.inf
 142   INF MdeModulePkg/Universal/WatchdogTimerDxe/WatchdogTimer.inf
 143
 144   #
 145   # Semi-hosting filesystem
 146   #
 147   INF ArmPkg/Filesystem/SemihostFs/SemihostFs.inf
 148
 149   #
 150   # FAT filesystem + GPT/MBR partitioning
 151   #
 152   INF MdeModulePkg/Universal/Disk/DiskIoDxe/DiskIoDxe.inf
 153   INF MdeModulePkg/Universal/Disk/PartitionDxe/PartitionDxe.inf
 154   INF FatBinPkg/EnhancedFatDxe/Fat.inf
 155   INF MdeModulePkg/Universal/Disk/UnicodeCollation/EnglishDxe/EnglishDxe.inf
 156
 157   #
 158   # UEFI application (Shell Embedded Boot Loader)
 159   #
 160   INF ShellBinPkg/UefiShell/UefiShell.inf
 161
 162   #
 163   # Bds
 164   #
 165   INF MdeModulePkg/Universal/DevicePathDxe/DevicePathDxe.inf
 166   INF ArmPlatformPkg/Bds/Bds.inf
 167
 168
 169 [FV.FVMAIN_COMPACT]
 170 FvAlignment        = 16
 171 ERASE_POLARITY     = 1
 172 MEMORY_MAPPED      = TRUE
 173 STICKY_WRITE       = TRUE
 174 LOCK_CAP           = TRUE
 175 LOCK_STATUS        = TRUE
 176 WRITE_DISABLED_CAP = TRUE
 177 WRITE_ENABLED_CAP  = TRUE
 178 WRITE_STATUS       = TRUE
 179 WRITE_LOCK_CAP     = TRUE
 180 WRITE_LOCK_STATUS  = TRUE
 181 READ_DISABLED_CAP  = TRUE
 182 READ_ENABLED_CAP   = TRUE
 183 READ_STATUS        = TRUE
 184 READ_LOCK_CAP      = TRUE
 185 READ_LOCK_STATUS   = TRUE
 186
 187 !if $(EDK2_SKIP_PEICORE) == 1
 188   INF ArmPlatformPkg/PrePi/PeiMPCore.inf
 189 !else
 190   INF ArmPlatformPkg/PrePeiCore/PrePeiCoreMPCore.inf
 191   INF MdeModulePkg/Core/Pei/PeiMain.inf
 192   INF ArmPlatformPkg/PlatformPei/PlatformPeim.inf
 193   INF ArmPlatformPkg/MemoryInitPei/MemoryInitPeim.inf
 194   INF ArmPkg/Drivers/CpuPei/CpuPei.inf
 195   INF MdeModulePkg/Universal/PCD/Pei/Pcd.inf
 196   INF IntelFrameworkModulePkg/Universal/StatusCode/Pei/StatusCodePei.inf
 197   INF MdeModulePkg/Core/DxeIplPeim/DxeIpl.inf
 198 !endif
 199
 200   FILE FV_IMAGE = 9E21FD93-9C72-4c15-8C4B-E77F1DB2D792 {
 201     SECTION GUIDED EE4E5898-3914-4259-9D6E-DC7BD79403CF PROCESSING_REQUIRED = TRUE {
 202       SECTION FV_IMAGE = FVMAIN
 203     }
 204   }
 205
 206
 207 ################################################################################
 208 #
 209 # Rules are use with the [FV] section's module INF type to define
 210 # how an FFS file is created for a given INF file. The following Rule are the default
 211 # rules for the different module type. User can add the customized rules to define the
 212 # content of the FFS file.
 213 #
 214 ################################################################################
 215
 216
 217 ############################################################################
 218 # Example of a DXE_DRIVER FFS file with a Checksum encapsulation section   #
 219 ############################################################################
 220 #
 221 #[Rule.Common.DXE_DRIVER]
 222 #  FILE DRIVER = $(NAMED_GUID) {
 223 #    DXE_DEPEX    DXE_DEPEX               Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
 224 #    COMPRESS PI_STD {
 225 #      GUIDED {
 226 #        PE32     PE32                    $(INF_OUTPUT)/$(MODULE_NAME).efi
 227 #        UI       STRING="$(MODULE_NAME)" Optional
 228 #        VERSION  STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
 229 #      }
 230 #    }
 231 #  }
 232 #
 233 ############################################################################
 234
 235 [Rule.Common.SEC]
 236   FILE SEC = $(NAMED_GUID) RELOCS_STRIPPED {
 237     TE  TE Align = 128                  $(INF_OUTPUT)/$(MODULE_NAME).efi
 238   }
 239
 240 [Rule.Common.PEI_CORE]
 241   FILE PEI_CORE = $(NAMED_GUID) {
 242     TE     TE Align = 8                 $(INF_OUTPUT)/$(MODULE_NAME).efi
 243     UI     STRING ="$(MODULE_NAME)" Optional
 244   }
 245
 246 [Rule.Common.PEIM]
 247   FILE PEIM = $(NAMED_GUID) {
 248      PEI_DEPEX PEI_DEPEX Optional       $(INF_OUTPUT)/$(MODULE_NAME).depex
 249      TE       TE Align = 8              $(INF_OUTPUT)/$(MODULE_NAME).efi
 250      UI       STRING="$(MODULE_NAME)" Optional
 251   }
 252
 253 [Rule.Common.PEIM.TIANOCOMPRESSED]
 254   FILE PEIM = $(NAMED_GUID) DEBUG_MYTOOLS_IA32 {
 255     PEI_DEPEX PEI_DEPEX Optional        $(INF_OUTPUT)/$(MODULE_NAME).depex
 256     GUIDED A31280AD-481E-41B6-95E8-127F4C984779 PROCESSING_REQUIRED = TRUE {
 257       PE32      PE32                    $(INF_OUTPUT)/$(MODULE_NAME).efi
 258       UI        STRING="$(MODULE_NAME)" Optional
 259     }
 260   }
 261
 262 [Rule.Common.DXE_CORE]
 263   FILE DXE_CORE = $(NAMED_GUID) {
 264     PE32     PE32                       $(INF_OUTPUT)/$(MODULE_NAME).efi
 265     UI       STRING="$(MODULE_NAME)" Optional
 266   }
 267
 268 [Rule.Common.UEFI_DRIVER]
 269   FILE DRIVER = $(NAMED_GUID) {
 270     DXE_DEPEX    DXE_DEPEX              Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
 271     PE32         PE32                   $(INF_OUTPUT)/$(MODULE_NAME).efi
 272     UI           STRING="$(MODULE_NAME)" Optional
 273   }
 274
 275 [Rule.Common.DXE_DRIVER]
 276   FILE DRIVER = $(NAMED_GUID) {
 277     DXE_DEPEX    DXE_DEPEX              Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
 278     PE32         PE32                   $(INF_OUTPUT)/$(MODULE_NAME).efi
 279     UI           STRING="$(MODULE_NAME)" Optional
 280   }
 281
 282 [Rule.Common.DXE_RUNTIME_DRIVER]
 283   FILE DRIVER = $(NAMED_GUID) {
 284     DXE_DEPEX    DXE_DEPEX              Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
 285     PE32         PE32                   $(INF_OUTPUT)/$(MODULE_NAME).efi
 286     UI           STRING="$(MODULE_NAME)" Optional
 287   }
 288
 289 [Rule.Common.UEFI_APPLICATION]
 290   FILE APPLICATION = $(NAMED_GUID) {
 291     UI     STRING ="$(MODULE_NAME)"     Optional
 292     PE32   PE32                         $(INF_OUTPUT)/$(MODULE_NAME).efi
 293   }
 294
 295 [Rule.Common.UEFI_DRIVER.BINARY]
 296   FILE DRIVER = $(NAMED_GUID) {
 297     DXE_DEPEX DXE_DEPEX Optional      |.depex
 298     PE32      PE32                    |.efi
 299     UI        STRING="$(MODULE_NAME)" Optional
 300     VERSION   STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
 301   }
 302
 303 [Rule.Common.UEFI_APPLICATION.BINARY]
 304   FILE APPLICATION = $(NAMED_GUID) {
 305     PE32      PE32                    |.efi
 306     UI        STRING="$(MODULE_NAME)" Optional
 307     VERSION   STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
 308   }