ArmPlatformPkg/ArmVExpressPkg/ArmVExpress-RTSM-AEMv8Ax4.fdf

   1 #
   2 #  Copyright (c) 2011 - 2015, ARM Limited. All rights reserved.
   3 #
   4 #  This program and the accompanying materials
   5 #  are licensed and made available under the terms and conditions of the BSD License
   6 #  which accompanies this distribution.  The full text of the license may be found at
   7 #  http://opensource.org/licenses/bsd-license.php
   8 #
   9 #  THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
  10 #  WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
  11 #
  12
  13 ################################################################################
  14 #
  15 # FD Section
  16 # The [FD] Section is made up of the definition statements and a
  17 # description of what goes into  the Flash Device Image.  Each FD section
  18 # defines one flash "device" image.  A flash device image may be one of
  19 # the following: Removable media bootable image (like a boot floppy
  20 # image,) an Option ROM image (that would be "flashed" into an add-in
  21 # card,) a System "Flash"  image (that would be burned into a system's
  22 # flash) or an Update ("Capsule") image that will be used to update and
  23 # existing system flash.
  24 #
  25 ################################################################################
  26
  27 [FD.RTSM_VE_AEMv8_EFI]
  28 BaseAddress   = 0x00000000|gArmTokenSpaceGuid.PcdFdBaseAddress  # The base address of the Firmware in NOR Flash.
  29 Size          = 0x00300000|gArmTokenSpaceGuid.PcdFdSize         # The size in bytes of the FLASH Device
  30 ErasePolarity = 1
  31
  32 # This one is tricky, it must be: BlockSize * NumBlocks = Size
  33 BlockSize     = 0x00001000
  34 NumBlocks     = 0x300
  35
  36 ################################################################################
  37 #
  38 # Following are lists of FD Region layout which correspond to the locations of different
  39 # images within the flash device.
  40 #
  41 # Regions must be defined in ascending order and may not overlap.
  42 #
  43 # A Layout Region start with a eight digit hex offset (leading "0x" required) followed by
  44 # the pipe "|" character, followed by the size of the region, also in hex with the leading
  45 # "0x" characters. Like:
  46 # Offset|Size
  47 # PcdOffsetCName|PcdSizeCName
  48 # RegionType <FV, DATA, or FILE>
  49 #
  50 ################################################################################
  51
  52 0x00000000|0x00080000
  53 gArmTokenSpaceGuid.PcdSecureFvBaseAddress|gArmTokenSpaceGuid.PcdSecureFvSize
  54 FV = FVMAIN_SEC
  55
  56 0x00080000|0x00280000
  57 gArmTokenSpaceGuid.PcdFvBaseAddress|gArmTokenSpaceGuid.PcdFvSize
  58 FV = FVMAIN_COMPACT
  59
  60
  61 ################################################################################
  62 #
  63 # FV Section
  64 #
  65 # [FV] section is used to define what components or modules are placed within a flash
  66 # device file.  This section also defines order the components and modules are positioned
  67 # within the image.  The [FV] section consists of define statements, set statements and
  68 # module statements.
  69 #
  70 ################################################################################
  71
  72 [FV.FVMAIN_SEC]
  73 FvBaseAddress      = 0x0
  74 FvForceRebase      = TRUE
  75 FvAlignment        = 16
  76 ERASE_POLARITY     = 1
  77 MEMORY_MAPPED      = TRUE
  78 STICKY_WRITE       = TRUE
  79 LOCK_CAP           = TRUE
  80 LOCK_STATUS        = TRUE
  81 WRITE_DISABLED_CAP = TRUE
  82 WRITE_ENABLED_CAP  = TRUE
  83 WRITE_STATUS       = TRUE
  84 WRITE_LOCK_CAP     = TRUE
  85 WRITE_LOCK_STATUS  = TRUE
  86 READ_DISABLED_CAP  = TRUE
  87 READ_ENABLED_CAP   = TRUE
  88 READ_STATUS        = TRUE
  89 READ_LOCK_CAP      = TRUE
  90 READ_LOCK_STATUS   = TRUE
  91
  92   INF ArmPlatformPkg/Sec/Sec.inf
  93
  94
  95 [FV.FvMain]
  96 BlockSize          = 0x40
  97 NumBlocks          = 0         # This FV gets compressed so make it just big enough
  98 FvAlignment        = 16        # FV alignment and FV attributes setting.
  99 ERASE_POLARITY     = 1
 100 MEMORY_MAPPED      = TRUE
 101 STICKY_WRITE       = TRUE
 102 LOCK_CAP           = TRUE
 103 LOCK_STATUS        = TRUE
 104 WRITE_DISABLED_CAP = TRUE
 105 WRITE_ENABLED_CAP  = TRUE
 106 WRITE_STATUS       = TRUE
 107 WRITE_LOCK_CAP     = TRUE
 108 WRITE_LOCK_STATUS  = TRUE
 109 READ_DISABLED_CAP  = TRUE
 110 READ_ENABLED_CAP   = TRUE
 111 READ_STATUS        = TRUE
 112 READ_LOCK_CAP      = TRUE
 113 READ_LOCK_STATUS   = TRUE
 114
 115   APRIORI DXE {
 116     INF MdeModulePkg/Universal/PCD/Dxe/Pcd.inf
 117   }
 118
 119   INF MdeModulePkg/Core/Dxe/DxeMain.inf
 120   INF MdeModulePkg/Universal/PCD/Dxe/Pcd.inf
 121
 122   #
 123   # PI DXE Drivers producing Architectural Protocols (EFI Services)
 124   #
 125   INF ArmPkg/Drivers/CpuDxe/CpuDxe.inf
 126   INF MdeModulePkg/Core/RuntimeDxe/RuntimeDxe.inf
 127   INF MdeModulePkg/Universal/SecurityStubDxe/SecurityStubDxe.inf
 128   INF MdeModulePkg/Universal/CapsuleRuntimeDxe/CapsuleRuntimeDxe.inf
 129   INF MdeModulePkg/Universal/Variable/RuntimeDxe/VariableRuntimeDxe.inf
 130   INF MdeModulePkg/Universal/FaultTolerantWriteDxe/FaultTolerantWriteDxe.inf
 131   INF MdeModulePkg/Universal/MonotonicCounterRuntimeDxe/MonotonicCounterRuntimeDxe.inf
 132   INF EmbeddedPkg/ResetRuntimeDxe/ResetRuntimeDxe.inf
 133   INF EmbeddedPkg/RealTimeClockRuntimeDxe/RealTimeClockRuntimeDxe.inf
 134   INF EmbeddedPkg/MetronomeDxe/MetronomeDxe.inf
 135
 136   INF MdeModulePkg/Universal/HiiDatabaseDxe/HiiDatabaseDxe.inf
 137
 138   #
 139   # Multiple Console IO support
 140   #
 141   INF MdeModulePkg/Universal/Console/ConPlatformDxe/ConPlatformDxe.inf
 142   INF MdeModulePkg/Universal/Console/ConSplitterDxe/ConSplitterDxe.inf
 143   INF MdeModulePkg/Universal/Console/GraphicsConsoleDxe/GraphicsConsoleDxe.inf
 144   INF MdeModulePkg/Universal/Console/TerminalDxe/TerminalDxe.inf
 145   INF EmbeddedPkg/SerialDxe/SerialDxe.inf
 146
 147   INF ArmPkg/Drivers/ArmGic/ArmGicDxe.inf
 148   INF ArmPkg/Drivers/TimerDxe/TimerDxe.inf
 149   INF ArmPlatformPkg/Drivers/NorFlashDxe/NorFlashDxe.inf
 150   INF ArmPlatformPkg/Drivers/LcdGraphicsOutputDxe/PL111LcdGraphicsOutputDxe.inf
 151   INF ArmPlatformPkg/Drivers/SP805WatchdogDxe/SP805WatchdogDxe.inf
 152
 153   #
 154   # Semi-hosting filesystem
 155   #
 156   INF ArmPkg/Filesystem/SemihostFs/SemihostFs.inf
 157
 158   #
 159   # FAT filesystem + GPT/MBR partitioning
 160   #
 161   INF MdeModulePkg/Universal/Disk/DiskIoDxe/DiskIoDxe.inf
 162   INF MdeModulePkg/Universal/Disk/PartitionDxe/PartitionDxe.inf
 163   INF FatBinPkg/EnhancedFatDxe/Fat.inf
 164   INF MdeModulePkg/Universal/Disk/UnicodeCollation/EnglishDxe/EnglishDxe.inf
 165
 166   #
 167   # Multimedia Card Interface
 168   #
 169   INF EmbeddedPkg/Universal/MmcDxe/MmcDxe.inf
 170   INF ArmPlatformPkg/Drivers/PL180MciDxe/PL180MciDxe.inf
 171
 172   #
 173   # Platform Driver
 174   #
 175   INF ArmPlatformPkg/ArmVExpressPkg/ArmVExpressDxe/ArmFvpDxe.inf
 176   INF OvmfPkg/VirtioBlkDxe/VirtioBlk.inf
 177
 178   #
 179   # FDT installation
 180   #
 181   INF EmbeddedPkg/Drivers/FdtPlatformDxe/FdtPlatformDxe.inf
 182
 183   #
 184   # UEFI application (Shell Embedded Boot Loader)
 185   #
 186   INF ShellBinPkg/UefiShell/UefiShell.inf
 187
 188   #
 189   # Bds
 190   #
 191   INF MdeModulePkg/Universal/DevicePathDxe/DevicePathDxe.inf
 192   INF ArmPlatformPkg/Bds/Bds.inf
 193
 194   # FV Filesystem
 195   INF MdeModulePkg/Universal/FvSimpleFileSystemDxe/FvSimpleFileSystemDxe.inf
 196
 197 [FV.FVMAIN_COMPACT]
 198 FvAlignment        = 16
 199 ERASE_POLARITY     = 1
 200 MEMORY_MAPPED      = TRUE
 201 STICKY_WRITE       = TRUE
 202 LOCK_CAP           = TRUE
 203 LOCK_STATUS        = TRUE
 204 WRITE_DISABLED_CAP = TRUE
 205 WRITE_ENABLED_CAP  = TRUE
 206 WRITE_STATUS       = TRUE
 207 WRITE_LOCK_CAP     = TRUE
 208 WRITE_LOCK_STATUS  = TRUE
 209 READ_DISABLED_CAP  = TRUE
 210 READ_ENABLED_CAP   = TRUE
 211 READ_STATUS        = TRUE
 212 READ_LOCK_CAP      = TRUE
 213 READ_LOCK_STATUS   = TRUE
 214
 215 !if $(EDK2_SKIP_PEICORE) == 1
 216   INF ArmPlatformPkg/PrePi/PeiMPCore.inf
 217 !else
 218   INF ArmPlatformPkg/PrePeiCore/PrePeiCoreMPCore.inf
 219   INF MdeModulePkg/Core/Pei/PeiMain.inf
 220   INF ArmPlatformPkg/PlatformPei/PlatformPeim.inf
 221   INF ArmPlatformPkg/MemoryInitPei/MemoryInitPeim.inf
 222   INF ArmPkg/Drivers/CpuPei/CpuPei.inf
 223   INF MdeModulePkg/Universal/PCD/Pei/Pcd.inf
 224   INF IntelFrameworkModulePkg/Universal/StatusCode/Pei/StatusCodePei.inf
 225   INF MdeModulePkg/Universal/Variable/Pei/VariablePei.inf
 226   INF MdeModulePkg/Core/DxeIplPeim/DxeIpl.inf
 227 !endif
 228
 229   FILE FV_IMAGE = 9E21FD93-9C72-4c15-8C4B-E77F1DB2D792 {
 230     SECTION GUIDED EE4E5898-3914-4259-9D6E-DC7BD79403CF PROCESSING_REQUIRED = TRUE {
 231       SECTION FV_IMAGE = FVMAIN
 232     }
 233   }
 234
 235
 236 ################################################################################
 237 #
 238 # Rules are use with the [FV] section's module INF type to define
 239 # how an FFS file is created for a given INF file. The following Rule are the default
 240 # rules for the different module type. User can add the customized rules to define the
 241 # content of the FFS file.
 242 #
 243 ################################################################################
 244
 245
 246 ############################################################################
 247 # Example of a DXE_DRIVER FFS file with a Checksum encapsulation section   #
 248 ############################################################################
 249 #
 250 #[Rule.Common.DXE_DRIVER]
 251 #  FILE DRIVER = $(NAMED_GUID) {
 252 #    DXE_DEPEX    DXE_DEPEX               Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
 253 #    COMPRESS PI_STD {
 254 #      GUIDED {
 255 #        PE32     PE32                    $(INF_OUTPUT)/$(MODULE_NAME).efi
 256 #        UI       STRING="$(MODULE_NAME)" Optional
 257 #        VERSION  STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
 258 #      }
 259 #    }
 260 #  }
 261 #
 262 ############################################################################
 263
 264 [Rule.Common.SEC]
 265   FILE SEC = $(NAMED_GUID) RELOCS_STRIPPED {
 266     TE  TE Align = 4K                  $(INF_OUTPUT)/$(MODULE_NAME).efi
 267   }
 268
 269 [Rule.Common.PEI_CORE]
 270   FILE PEI_CORE = $(NAMED_GUID) {
 271     TE     TE Align = 8                 $(INF_OUTPUT)/$(MODULE_NAME).efi
 272     UI     STRING ="$(MODULE_NAME)" Optional
 273   }
 274
 275 [Rule.Common.PEIM]
 276   FILE PEIM = $(NAMED_GUID) {
 277      PEI_DEPEX PEI_DEPEX Optional       $(INF_OUTPUT)/$(MODULE_NAME).depex
 278      TE       TE Align = 8              $(INF_OUTPUT)/$(MODULE_NAME).efi
 279      UI       STRING="$(MODULE_NAME)" Optional
 280   }
 281
 282 [Rule.Common.PEIM.TIANOCOMPRESSED]
 283   FILE PEIM = $(NAMED_GUID) DEBUG_MYTOOLS_IA32 {
 284     PEI_DEPEX PEI_DEPEX Optional        $(INF_OUTPUT)/$(MODULE_NAME).depex
 285     GUIDED A31280AD-481E-41B6-95E8-127F4C984779 PROCESSING_REQUIRED = TRUE {
 286       PE32      PE32                    $(INF_OUTPUT)/$(MODULE_NAME).efi
 287       UI        STRING="$(MODULE_NAME)" Optional
 288     }
 289   }
 290
 291 [Rule.Common.DXE_CORE]
 292   FILE DXE_CORE = $(NAMED_GUID) {
 293     PE32     PE32                       $(INF_OUTPUT)/$(MODULE_NAME).efi
 294     UI       STRING="$(MODULE_NAME)" Optional
 295   }
 296
 297 [Rule.Common.UEFI_DRIVER]
 298   FILE DRIVER = $(NAMED_GUID) {
 299     DXE_DEPEX    DXE_DEPEX              Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
 300     PE32         PE32                   $(INF_OUTPUT)/$(MODULE_NAME).efi
 301     UI           STRING="$(MODULE_NAME)" Optional
 302   }
 303
 304 [Rule.Common.DXE_DRIVER]
 305   FILE DRIVER = $(NAMED_GUID) {
 306     DXE_DEPEX    DXE_DEPEX              Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
 307     PE32         PE32                   $(INF_OUTPUT)/$(MODULE_NAME).efi
 308     UI           STRING="$(MODULE_NAME)" Optional
 309   }
 310
 311 [Rule.Common.DXE_RUNTIME_DRIVER]
 312   FILE DRIVER = $(NAMED_GUID) {
 313     DXE_DEPEX    DXE_DEPEX              Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
 314     PE32         PE32                   $(INF_OUTPUT)/$(MODULE_NAME).efi
 315     UI           STRING="$(MODULE_NAME)" Optional
 316   }
 317
 318 [Rule.Common.UEFI_APPLICATION]
 319   FILE APPLICATION = $(NAMED_GUID) {
 320     UI     STRING ="$(MODULE_NAME)"     Optional
 321     PE32   PE32                         $(INF_OUTPUT)/$(MODULE_NAME).efi
 322   }
 323
 324 [Rule.Common.UEFI_DRIVER.BINARY]
 325   FILE DRIVER = $(NAMED_GUID) {
 326     DXE_DEPEX DXE_DEPEX Optional      |.depex
 327     PE32      PE32                    |.efi
 328     UI        STRING="$(MODULE_NAME)" Optional
 329     VERSION   STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
 330   }
 331
 332 [Rule.Common.UEFI_APPLICATION.BINARY]
 333   FILE APPLICATION = $(NAMED_GUID) {
 334     PE32      PE32                    |.efi
 335     UI        STRING="$(MODULE_NAME)" Optional
 336     VERSION   STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
 337   }