ArmPlatformPkg/ArmVirtualizationPkg/ArmVirtualizationQemu.fdf

   1 #
   2 #  Copyright (c) 2011, 2013, ARM Limited. All rights reserved.
   3 #  Copyright (c) 2014, Linaro Limited. All rights reserved.
   4 #
   5 #  This program and the accompanying materials
   6 #  are licensed and made available under the terms and conditions of the BSD License
   7 #  which accompanies this distribution.  The full text of the license may be found at
   8 #  http://opensource.org/licenses/bsd-license.php
   9 #
  10 #  THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
  11 #  WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
  12 #
  13
  14 ################################################################################
  15 #
  16 # FD Section
  17 # The [FD] Section is made up of the definition statements and a
  18 # description of what goes into  the Flash Device Image.  Each FD section
  19 # defines one flash "device" image.  A flash device image may be one of
  20 # the following: Removable media bootable image (like a boot floppy
  21 # image,) an Option ROM image (that would be "flashed" into an add-in
  22 # card,) a System "Flash"  image (that would be burned into a system's
  23 # flash) or an Update ("Capsule") image that will be used to update and
  24 # existing system flash.
  25 #
  26 ################################################################################
  27
  28 [FD.QEMU_EFI]
  29 BaseAddress   = 0x00000000|gArmTokenSpaceGuid.PcdFdBaseAddress  # QEMU assigns 0 - 0x8000000 for a BootROM
  30 Size          = 0x00200000|gArmTokenSpaceGuid.PcdFdSize         # The size in bytes of the FLASH Device
  31 ErasePolarity = 1
  32
  33 # This one is tricky, it must be: BlockSize * NumBlocks = Size
  34 BlockSize     = 0x00001000
  35 NumBlocks     = 0x200
  36
  37 ################################################################################
  38 #
  39 # Following are lists of FD Region layout which correspond to the locations of different
  40 # images within the flash device.
  41 #
  42 # Regions must be defined in ascending order and may not overlap.
  43 #
  44 # A Layout Region start with a eight digit hex offset (leading "0x" required) followed by
  45 # the pipe "|" character, followed by the size of the region, also in hex with the leading
  46 # "0x" characters. Like:
  47 # Offset|Size
  48 # PcdOffsetCName|PcdSizeCName
  49 # RegionType <FV, DATA, or FILE>
  50 #
  51 ################################################################################
  52
  53 #
  54 # UEFI has trouble dealing with FVs that reside at physical address 0x0.
  55 # So instead, put a hardcoded 'jump to 0x1000' at offset 0x0, and put the
  56 # real FV at offset 0x1000
  57 #
  58 0x00000000|0x00001000
  59 DATA = {
  60 !if $(ARCH) == AARCH64
  61   0x00, 0x04, 0x00, 0x14   # 'b 0x1000' in AArch64 ASM
  62 !else
  63   0xfe, 0x03, 0x00, 0xea   # 'b 0x1000' in AArch32 ASM
  64 !endif
  65 }
  66
  67 0x00001000|0x001ff000
  68 gArmTokenSpaceGuid.PcdFvBaseAddress|gArmTokenSpaceGuid.PcdFvSize
  69 FV = FVMAIN_COMPACT
  70
  71
  72 ################################################################################
  73 #
  74 # FV Section
  75 #
  76 # [FV] section is used to define what components or modules are placed within a flash
  77 # device file.  This section also defines order the components and modules are positioned
  78 # within the image.  The [FV] section consists of define statements, set statements and
  79 # module statements.
  80 #
  81 ################################################################################
  82
  83 [FV.FvMain]
  84 BlockSize          = 0x40
  85 NumBlocks          = 0         # This FV gets compressed so make it just big enough
  86 FvAlignment        = 16        # FV alignment and FV attributes setting.
  87 ERASE_POLARITY     = 1
  88 MEMORY_MAPPED      = TRUE
  89 STICKY_WRITE       = TRUE
  90 LOCK_CAP           = TRUE
  91 LOCK_STATUS        = TRUE
  92 WRITE_DISABLED_CAP = TRUE
  93 WRITE_ENABLED_CAP  = TRUE
  94 WRITE_STATUS       = TRUE
  95 WRITE_LOCK_CAP     = TRUE
  96 WRITE_LOCK_STATUS  = TRUE
  97 READ_DISABLED_CAP  = TRUE
  98 READ_ENABLED_CAP   = TRUE
  99 READ_STATUS        = TRUE
 100 READ_LOCK_CAP      = TRUE
 101 READ_LOCK_STATUS   = TRUE
 102
 103   APRIORI DXE {
 104     INF MdeModulePkg/Universal/PCD/Dxe/Pcd.inf
 105     INF ArmPlatformPkg/ArmVirtualizationPkg/VirtFdtDxe/VirtFdtDxe.inf
 106   }
 107   INF MdeModulePkg/Core/Dxe/DxeMain.inf
 108   INF MdeModulePkg/Universal/PCD/Dxe/Pcd.inf
 109   INF ArmPlatformPkg/ArmVirtualizationPkg/VirtFdtDxe/VirtFdtDxe.inf
 110
 111   #
 112   # PI DXE Drivers producing Architectural Protocols (EFI Services)
 113   #
 114   INF ArmPkg/Drivers/CpuDxe/CpuDxe.inf
 115   INF MdeModulePkg/Core/RuntimeDxe/RuntimeDxe.inf
 116   INF MdeModulePkg/Universal/SecurityStubDxe/SecurityStubDxe.inf
 117   INF MdeModulePkg/Universal/CapsuleRuntimeDxe/CapsuleRuntimeDxe.inf
 118   INF MdeModulePkg/Universal/FaultTolerantWriteDxe/FaultTolerantWriteDxe.inf
 119   INF MdeModulePkg/Universal/Variable/RuntimeDxe/VariableRuntimeDxe.inf
 120   INF MdeModulePkg/Universal/MonotonicCounterRuntimeDxe/MonotonicCounterRuntimeDxe.inf
 121   INF EmbeddedPkg/ResetRuntimeDxe/ResetRuntimeDxe.inf
 122   INF EmbeddedPkg/RealTimeClockRuntimeDxe/RealTimeClockRuntimeDxe.inf
 123   INF EmbeddedPkg/MetronomeDxe/MetronomeDxe.inf
 124   INF MdeModulePkg/Universal/HiiDatabaseDxe/HiiDatabaseDxe.inf
 125
 126   #
 127   # Multiple Console IO support
 128   #
 129   INF MdeModulePkg/Universal/Console/ConPlatformDxe/ConPlatformDxe.inf
 130   INF MdeModulePkg/Universal/Console/ConSplitterDxe/ConSplitterDxe.inf
 131   INF MdeModulePkg/Universal/Console/GraphicsConsoleDxe/GraphicsConsoleDxe.inf
 132   INF MdeModulePkg/Universal/Console/TerminalDxe/TerminalDxe.inf
 133   INF EmbeddedPkg/SerialDxe/SerialDxe.inf
 134
 135   INF ArmPkg/Drivers/ArmGic/ArmGicDxe.inf
 136   INF ArmPkg/Drivers/TimerDxe/TimerDxe.inf
 137   INF ArmPlatformPkg/Drivers/NorFlashDxe/NorFlashDxe.inf
 138   INF MdeModulePkg/Universal/WatchdogTimerDxe/WatchdogTimer.inf
 139
 140   #
 141   # FAT filesystem + GPT/MBR partitioning
 142   #
 143   INF MdeModulePkg/Universal/Disk/DiskIoDxe/DiskIoDxe.inf
 144   INF MdeModulePkg/Universal/Disk/PartitionDxe/PartitionDxe.inf
 145   INF FatBinPkg/EnhancedFatDxe/Fat.inf
 146   INF MdeModulePkg/Universal/Disk/UnicodeCollation/EnglishDxe/EnglishDxe.inf
 147
 148   #
 149   # Platform Driver
 150   #
 151   INF OvmfPkg/VirtioBlkDxe/VirtioBlk.inf
 152   INF OvmfPkg/VirtioNetDxe/VirtioNet.inf
 153   INF OvmfPkg/VirtioScsiDxe/VirtioScsi.inf
 154
 155   #
 156   # UEFI application (Shell Embedded Boot Loader)
 157   #
 158   INF ShellBinPkg/UefiShell/UefiShell.inf
 159
 160   #
 161   # Bds
 162   #
 163   INF MdeModulePkg/Universal/DevicePathDxe/DevicePathDxe.inf
 164 !ifdef INTEL_BDS
 165   INF MdeModulePkg/Universal/DisplayEngineDxe/DisplayEngineDxe.inf
 166   INF MdeModulePkg/Universal/SetupBrowserDxe/SetupBrowserDxe.inf
 167   INF IntelFrameworkModulePkg/Universal/BdsDxe/BdsDxe.inf
 168 !else
 169   INF ArmPlatformPkg/Bds/Bds.inf
 170 !endif
 171
 172   #
 173   # Networking stack
 174   #
 175   INF MdeModulePkg/Universal/Network/DpcDxe/DpcDxe.inf
 176   INF MdeModulePkg/Universal/Network/ArpDxe/ArpDxe.inf
 177   INF MdeModulePkg/Universal/Network/Dhcp4Dxe/Dhcp4Dxe.inf
 178   INF MdeModulePkg/Universal/Network/Ip4ConfigDxe/Ip4ConfigDxe.inf
 179   INF MdeModulePkg/Universal/Network/Ip4Dxe/Ip4Dxe.inf
 180   INF MdeModulePkg/Universal/Network/MnpDxe/MnpDxe.inf
 181   INF MdeModulePkg/Universal/Network/VlanConfigDxe/VlanConfigDxe.inf
 182   INF MdeModulePkg/Universal/Network/Mtftp4Dxe/Mtftp4Dxe.inf
 183   INF MdeModulePkg/Universal/Network/Tcp4Dxe/Tcp4Dxe.inf
 184   INF MdeModulePkg/Universal/Network/Udp4Dxe/Udp4Dxe.inf
 185   INF MdeModulePkg/Universal/Network/UefiPxeBcDxe/UefiPxeBcDxe.inf
 186   INF MdeModulePkg/Universal/Network/IScsiDxe/IScsiDxe.inf
 187
 188   #
 189   # SCSI Bus and Disk Driver
 190   #
 191   INF MdeModulePkg/Bus/Scsi/ScsiBusDxe/ScsiBusDxe.inf
 192   INF MdeModulePkg/Bus/Scsi/ScsiDiskDxe/ScsiDiskDxe.inf
 193
 194   #
 195   # ACPI Support
 196   #
 197   INF MdeModulePkg/Universal/Acpi/AcpiTableDxe/AcpiTableDxe.inf
 198   INF OvmfPkg/AcpiPlatformDxe/QemuFwCfgAcpiPlatformDxe.inf
 199
 200   #
 201   # PCI support
 202   #
 203   INF ArmPlatformPkg/ArmVirtualizationPkg/PciHostBridgeDxe/PciHostBridgeDxe.inf
 204   INF MdeModulePkg/Bus/Pci/PciBusDxe/PciBusDxe.inf
 205   INF OvmfPkg/VirtioPciDeviceDxe/VirtioPciDeviceDxe.inf
 206
 207 [FV.FVMAIN_COMPACT]
 208 FvAlignment        = 16
 209 ERASE_POLARITY     = 1
 210 MEMORY_MAPPED      = TRUE
 211 STICKY_WRITE       = TRUE
 212 LOCK_CAP           = TRUE
 213 LOCK_STATUS        = TRUE
 214 WRITE_DISABLED_CAP = TRUE
 215 WRITE_ENABLED_CAP  = TRUE
 216 WRITE_STATUS       = TRUE
 217 WRITE_LOCK_CAP     = TRUE
 218 WRITE_LOCK_STATUS  = TRUE
 219 READ_DISABLED_CAP  = TRUE
 220 READ_ENABLED_CAP   = TRUE
 221 READ_STATUS        = TRUE
 222 READ_LOCK_CAP      = TRUE
 223 READ_LOCK_STATUS   = TRUE
 224
 225   APRIORI PEI {
 226     INF  MdeModulePkg/Universal/PCD/Pei/Pcd.inf
 227   }
 228   INF ArmPlatformPkg/PrePeiCore/PrePeiCoreUniCore.inf
 229   INF MdeModulePkg/Core/Pei/PeiMain.inf
 230   INF ArmPlatformPkg/PlatformPei/PlatformPeim.inf
 231   INF ArmPlatformPkg/MemoryInitPei/MemoryInitPeim.inf
 232   INF ArmPkg/Drivers/CpuPei/CpuPei.inf
 233   INF MdeModulePkg/Universal/PCD/Pei/Pcd.inf
 234   INF MdeModulePkg/Universal/Variable/Pei/VariablePei.inf
 235   INF MdeModulePkg/Core/DxeIplPeim/DxeIpl.inf
 236
 237   FILE FV_IMAGE = 9E21FD93-9C72-4c15-8C4B-E77F1DB2D792 {
 238     SECTION GUIDED EE4E5898-3914-4259-9D6E-DC7BD79403CF PROCESSING_REQUIRED = TRUE {
 239       SECTION FV_IMAGE = FVMAIN
 240     }
 241   }
 242
 243
 244 ################################################################################
 245 #
 246 # Rules are use with the [FV] section's module INF type to define
 247 # how an FFS file is created for a given INF file. The following Rule are the default
 248 # rules for the different module type. User can add the customized rules to define the
 249 # content of the FFS file.
 250 #
 251 ################################################################################
 252
 253
 254 ############################################################################
 255 # Example of a DXE_DRIVER FFS file with a Checksum encapsulation section   #
 256 ############################################################################
 257 #
 258 #[Rule.Common.DXE_DRIVER]
 259 #  FILE DRIVER = $(NAMED_GUID) {
 260 #    DXE_DEPEX    DXE_DEPEX               Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
 261 #    COMPRESS PI_STD {
 262 #      GUIDED {
 263 #        PE32     PE32                    $(INF_OUTPUT)/$(MODULE_NAME).efi
 264 #        UI       STRING="$(MODULE_NAME)" Optional
 265 #        VERSION  STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
 266 #      }
 267 #    }
 268 #  }
 269 #
 270 ############################################################################
 271
 272 [Rule.Common.SEC]
 273   FILE SEC = $(NAMED_GUID) RELOCS_STRIPPED {
 274     TE  TE Align = 128                  $(INF_OUTPUT)/$(MODULE_NAME).efi
 275   }
 276
 277 [Rule.Common.PEI_CORE]
 278   FILE PEI_CORE = $(NAMED_GUID) {
 279     TE     TE Align = 8                 $(INF_OUTPUT)/$(MODULE_NAME).efi
 280     UI     STRING ="$(MODULE_NAME)" Optional
 281   }
 282
 283 [Rule.Common.PEIM]
 284   FILE PEIM = $(NAMED_GUID) {
 285      PEI_DEPEX PEI_DEPEX Optional       $(INF_OUTPUT)/$(MODULE_NAME).depex
 286      TE       TE Align = 8              $(INF_OUTPUT)/$(MODULE_NAME).efi
 287      UI       STRING="$(MODULE_NAME)" Optional
 288   }
 289
 290 [Rule.Common.PEIM.TIANOCOMPRESSED]
 291   FILE PEIM = $(NAMED_GUID) DEBUG_MYTOOLS_IA32 {
 292     PEI_DEPEX PEI_DEPEX Optional        $(INF_OUTPUT)/$(MODULE_NAME).depex
 293     GUIDED A31280AD-481E-41B6-95E8-127F4C984779 PROCESSING_REQUIRED = TRUE {
 294       PE32      PE32                    $(INF_OUTPUT)/$(MODULE_NAME).efi
 295       UI        STRING="$(MODULE_NAME)" Optional
 296     }
 297   }
 298
 299 [Rule.Common.DXE_CORE]
 300   FILE DXE_CORE = $(NAMED_GUID) {
 301     PE32     PE32                       $(INF_OUTPUT)/$(MODULE_NAME).efi
 302     UI       STRING="$(MODULE_NAME)" Optional
 303   }
 304
 305 [Rule.Common.UEFI_DRIVER]
 306   FILE DRIVER = $(NAMED_GUID) {
 307     DXE_DEPEX    DXE_DEPEX              Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
 308     PE32         PE32                   $(INF_OUTPUT)/$(MODULE_NAME).efi
 309     UI           STRING="$(MODULE_NAME)" Optional
 310   }
 311
 312 [Rule.Common.DXE_DRIVER]
 313   FILE DRIVER = $(NAMED_GUID) {
 314     DXE_DEPEX    DXE_DEPEX              Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
 315     PE32         PE32                   $(INF_OUTPUT)/$(MODULE_NAME).efi
 316     UI           STRING="$(MODULE_NAME)" Optional
 317   }
 318
 319 [Rule.Common.DXE_RUNTIME_DRIVER]
 320   FILE DRIVER = $(NAMED_GUID) {
 321     DXE_DEPEX    DXE_DEPEX              Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
 322     PE32         PE32                   $(INF_OUTPUT)/$(MODULE_NAME).efi
 323     UI           STRING="$(MODULE_NAME)" Optional
 324   }
 325
 326 [Rule.Common.UEFI_APPLICATION]
 327   FILE APPLICATION = $(NAMED_GUID) {
 328     UI     STRING ="$(MODULE_NAME)"     Optional
 329     PE32   PE32                         $(INF_OUTPUT)/$(MODULE_NAME).efi
 330   }
 331
 332 [Rule.Common.UEFI_DRIVER.BINARY]
 333   FILE DRIVER = $(NAMED_GUID) {
 334     DXE_DEPEX DXE_DEPEX Optional      |.depex
 335     PE32      PE32                    |.efi
 336     UI        STRING="$(MODULE_NAME)" Optional
 337     VERSION   STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
 338   }
 339
 340 [Rule.Common.UEFI_APPLICATION.BINARY]
 341   FILE APPLICATION = $(NAMED_GUID) {
 342     PE32      PE32                    |.efi
 343     UI        STRING="$(MODULE_NAME)" Optional
 344     VERSION   STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
 345   }
 346
 347 [Rule.Common.USER_DEFINED.ACPITABLE]
 348   FILE FREEFORM = $(NAMED_GUID) {
 349     RAW       ACPI                    |.acpi
 350     RAW       ASL                     |.aml
 351     UI        STRING="$(MODULE_NAME)" Optional
 352   }