ArmVirtPkg/ArmVirtQemuKernel.fdf

   1 #
   2 #  Copyright (c) 2011-2015, ARM Limited. All rights reserved.
   3 #  Copyright (c) 2014, Linaro Limited. All rights reserved.
   4 #  Copyright (c) 2015 - 2016, Intel Corporation. All rights reserved.
   5 #
   6 #  This program and the accompanying materials
   7 #  are licensed and made available under the terms and conditions of the BSD License
   8 #  which accompanies this distribution.  The full text of the license may be found at
   9 #  http://opensource.org/licenses/bsd-license.php
  10 #
  11 #  THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
  12 #  WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
  13 #
  14
  15 ################################################################################
  16 #
  17 # FD Section
  18 # The [FD] Section is made up of the definition statements and a
  19 # description of what goes into  the Flash Device Image.  Each FD section
  20 # defines one flash "device" image.  A flash device image may be one of
  21 # the following: Removable media bootable image (like a boot floppy
  22 # image,) an Option ROM image (that would be "flashed" into an add-in
  23 # card,) a System "Flash"  image (that would be burned into a system's
  24 # flash) or an Update ("Capsule") image that will be used to update and
  25 # existing system flash.
  26 #
  27 ################################################################################
  28
  29 [FD.QEMU_EFI]
  30 BaseAddress   = 0x00000000|gArmTokenSpaceGuid.PcdFdBaseAddress  # QEMU assigns 0 - 0x8000000 for a BootROM
  31 Size          = 0x00200000|gArmTokenSpaceGuid.PcdFdSize         # The size in bytes of the FLASH Device
  32 ErasePolarity = 1
  33
  34 # This one is tricky, it must be: BlockSize * NumBlocks = Size
  35 BlockSize     = 0x00001000
  36 NumBlocks     = 0x200
  37
  38 ################################################################################
  39 #
  40 # Following are lists of FD Region layout which correspond to the locations of different
  41 # images within the flash device.
  42 #
  43 # Regions must be defined in ascending order and may not overlap.
  44 #
  45 # A Layout Region start with a eight digit hex offset (leading "0x" required) followed by
  46 # the pipe "|" character, followed by the size of the region, also in hex with the leading
  47 # "0x" characters. Like:
  48 # Offset|Size
  49 # PcdOffsetCName|PcdSizeCName
  50 # RegionType <FV, DATA, or FILE>
  51 #
  52 ################################################################################
  53
  54 #
  55 # Implement the Linux kernel header layout so that the Xen loader will identify
  56 # it as something bootable, and execute it with a FDT pointer in x0 or r2.
  57 # This area will be reused to store a copy of the FDT so round it up to 8 KB.
  58 #
  59 0x00000000|0x00002000
  60 DATA = {
  61 !if $(ARCH) == AARCH64
  62   0x01, 0x00, 0x00, 0x10,                         # code0: adr x1, .
  63   0xff, 0x07, 0x00, 0x14,                         # code1: b 0x2000
  64   0x00, 0x00, 0x08, 0x00, 0x00, 0x00, 0x00, 0x00, # text_offset: 512 KB
  65   0x00, 0x00, 0x20, 0x00, 0x00, 0x00, 0x00, 0x00, # image_size: 2 MB
  66   0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, # flags
  67   0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, # res2
  68   0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, # res3
  69   0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, # res4
  70   0x41, 0x52, 0x4d, 0x64,                         # magic: "ARM\x64"
  71   0x00, 0x00, 0x00, 0x00                          # res5
  72 !else
  73   0x08, 0x10, 0x4f, 0xe2, # adr r1, .
  74   0x02, 0x00, 0xa0, 0xe1, # mov r0, r2 (DTB)
  75   0x00, 0x00, 0xa0, 0xe1, # nop
  76   0x00, 0x00, 0xa0, 0xe1, # nop
  77   0x00, 0x00, 0xa0, 0xe1, # nop
  78   0x00, 0x00, 0xa0, 0xe1, # nop
  79   0x00, 0x00, 0xa0, 0xe1, # nop
  80   0x00, 0x00, 0xa0, 0xe1, # nop
  81
  82   0xf6, 0x07, 0x00, 0xea, # b 0x2000
  83   0x18, 0x28, 0x6f, 0x01, # magic
  84   0x00, 0x00, 0x00, 0x00, # start
  85   0x00, 0x00, 0x20, 0x00, # image size: 2 MB
  86   0x01, 0x02, 0x03, 0x04  # endiannness flag
  87 !endif
  88 }
  89
  90 0x00002000|0x001fe000
  91 gArmTokenSpaceGuid.PcdFvBaseAddress|gArmTokenSpaceGuid.PcdFvSize
  92 FV = FVMAIN_COMPACT
  93
  94
  95 ################################################################################
  96 #
  97 # FV Section
  98 #
  99 # [FV] section is used to define what components or modules are placed within a flash
 100 # device file.  This section also defines order the components and modules are positioned
 101 # within the image.  The [FV] section consists of define statements, set statements and
 102 # module statements.
 103 #
 104 ################################################################################
 105
 106 [FV.FvMain]
 107 BlockSize          = 0x40
 108 NumBlocks          = 0         # This FV gets compressed so make it just big enough
 109 FvAlignment        = 16        # FV alignment and FV attributes setting.
 110 ERASE_POLARITY     = 1
 111 MEMORY_MAPPED      = TRUE
 112 STICKY_WRITE       = TRUE
 113 LOCK_CAP           = TRUE
 114 LOCK_STATUS        = TRUE
 115 WRITE_DISABLED_CAP = TRUE
 116 WRITE_ENABLED_CAP  = TRUE
 117 WRITE_STATUS       = TRUE
 118 WRITE_LOCK_CAP     = TRUE
 119 WRITE_LOCK_STATUS  = TRUE
 120 READ_DISABLED_CAP  = TRUE
 121 READ_ENABLED_CAP   = TRUE
 122 READ_STATUS        = TRUE
 123 READ_LOCK_CAP      = TRUE
 124 READ_LOCK_STATUS   = TRUE
 125
 126   APRIORI DXE {
 127     INF MdeModulePkg/Universal/PCD/Dxe/Pcd.inf
 128     INF ArmVirtPkg/VirtFdtDxe/VirtFdtDxe.inf
 129   }
 130   INF MdeModulePkg/Core/Dxe/DxeMain.inf
 131   INF MdeModulePkg/Universal/PCD/Dxe/Pcd.inf
 132   INF ArmVirtPkg/VirtFdtDxe/VirtFdtDxe.inf
 133   INF ArmVirtPkg/FdtClientDxe/FdtClientDxe.inf
 134
 135   #
 136   # PI DXE Drivers producing Architectural Protocols (EFI Services)
 137   #
 138   INF ArmPkg/Drivers/CpuDxe/CpuDxe.inf
 139   INF MdeModulePkg/Core/RuntimeDxe/RuntimeDxe.inf
 140   INF MdeModulePkg/Universal/SecurityStubDxe/SecurityStubDxe.inf
 141   INF MdeModulePkg/Universal/CapsuleRuntimeDxe/CapsuleRuntimeDxe.inf
 142   INF MdeModulePkg/Universal/FaultTolerantWriteDxe/FaultTolerantWriteDxe.inf
 143   INF MdeModulePkg/Universal/Variable/RuntimeDxe/VariableRuntimeDxe.inf
 144 !if $(SECURE_BOOT_ENABLE) == TRUE
 145   INF SecurityPkg/VariableAuthenticated/SecureBootConfigDxe/SecureBootConfigDxe.inf
 146 !endif
 147   INF MdeModulePkg/Universal/MonotonicCounterRuntimeDxe/MonotonicCounterRuntimeDxe.inf
 148   INF EmbeddedPkg/ResetRuntimeDxe/ResetRuntimeDxe.inf
 149   INF EmbeddedPkg/RealTimeClockRuntimeDxe/RealTimeClockRuntimeDxe.inf
 150   INF EmbeddedPkg/MetronomeDxe/MetronomeDxe.inf
 151   INF MdeModulePkg/Universal/HiiDatabaseDxe/HiiDatabaseDxe.inf
 152
 153   #
 154   # Multiple Console IO support
 155   #
 156   INF MdeModulePkg/Universal/Console/ConPlatformDxe/ConPlatformDxe.inf
 157   INF MdeModulePkg/Universal/Console/ConSplitterDxe/ConSplitterDxe.inf
 158   INF MdeModulePkg/Universal/Console/GraphicsConsoleDxe/GraphicsConsoleDxe.inf
 159   INF MdeModulePkg/Universal/Console/TerminalDxe/TerminalDxe.inf
 160   INF MdeModulePkg/Universal/SerialDxe/SerialDxe.inf
 161
 162   INF ArmPkg/Drivers/ArmGic/ArmGicDxe.inf
 163   INF ArmPkg/Drivers/TimerDxe/TimerDxe.inf
 164 !if $(SECURE_BOOT_ENABLE) == TRUE
 165   INF ArmPlatformPkg/Drivers/NorFlashDxe/NorFlashAuthenticatedDxe.inf
 166 !else
 167   INF ArmPlatformPkg/Drivers/NorFlashDxe/NorFlashDxe.inf
 168 !endif
 169   INF MdeModulePkg/Universal/WatchdogTimerDxe/WatchdogTimer.inf
 170
 171   #
 172   # FAT filesystem + GPT/MBR partitioning
 173   #
 174   INF MdeModulePkg/Universal/Disk/DiskIoDxe/DiskIoDxe.inf
 175   INF MdeModulePkg/Universal/Disk/PartitionDxe/PartitionDxe.inf
 176   INF FatPkg/EnhancedFatDxe/Fat.inf
 177   INF MdeModulePkg/Universal/Disk/UnicodeCollation/EnglishDxe/EnglishDxe.inf
 178
 179   #
 180   # Platform Driver
 181   #
 182   INF OvmfPkg/VirtioBlkDxe/VirtioBlk.inf
 183   INF OvmfPkg/VirtioNetDxe/VirtioNet.inf
 184   INF OvmfPkg/VirtioScsiDxe/VirtioScsi.inf
 185
 186   #
 187   # UEFI application (Shell Embedded Boot Loader)
 188   #
 189   INF ShellPkg/Application/Shell/Shell.inf
 190
 191   #
 192   # Bds
 193   #
 194   INF MdeModulePkg/Universal/DevicePathDxe/DevicePathDxe.inf
 195   INF MdeModulePkg/Universal/DisplayEngineDxe/DisplayEngineDxe.inf
 196   INF MdeModulePkg/Universal/SetupBrowserDxe/SetupBrowserDxe.inf
 197   INF IntelFrameworkModulePkg/Universal/BdsDxe/BdsDxe.inf
 198
 199   #
 200   # Networking stack
 201   #
 202   INF MdeModulePkg/Universal/Network/DpcDxe/DpcDxe.inf
 203   INF MdeModulePkg/Universal/Network/ArpDxe/ArpDxe.inf
 204   INF MdeModulePkg/Universal/Network/Dhcp4Dxe/Dhcp4Dxe.inf
 205   INF MdeModulePkg/Universal/Network/Ip4Dxe/Ip4Dxe.inf
 206   INF MdeModulePkg/Universal/Network/MnpDxe/MnpDxe.inf
 207   INF MdeModulePkg/Universal/Network/VlanConfigDxe/VlanConfigDxe.inf
 208   INF MdeModulePkg/Universal/Network/Mtftp4Dxe/Mtftp4Dxe.inf
 209   INF MdeModulePkg/Universal/Network/Tcp4Dxe/Tcp4Dxe.inf
 210   INF MdeModulePkg/Universal/Network/Udp4Dxe/Udp4Dxe.inf
 211   INF MdeModulePkg/Universal/Network/UefiPxeBcDxe/UefiPxeBcDxe.inf
 212   INF MdeModulePkg/Universal/Network/IScsiDxe/IScsiDxe.inf
 213
 214   #
 215   # SCSI Bus and Disk Driver
 216   #
 217   INF MdeModulePkg/Bus/Scsi/ScsiBusDxe/ScsiBusDxe.inf
 218   INF MdeModulePkg/Bus/Scsi/ScsiDiskDxe/ScsiDiskDxe.inf
 219
 220   #
 221   # SMBIOS Support
 222   #
 223   INF MdeModulePkg/Universal/SmbiosDxe/SmbiosDxe.inf
 224   INF OvmfPkg/SmbiosPlatformDxe/SmbiosPlatformDxe.inf
 225
 226   #
 227   # ACPI Support
 228   #
 229   INF MdeModulePkg/Universal/Acpi/AcpiTableDxe/AcpiTableDxe.inf
 230   INF OvmfPkg/AcpiPlatformDxe/QemuFwCfgAcpiPlatformDxe.inf
 231
 232   #
 233   # PCI support
 234   #
 235   INF ArmVirtPkg/PciHostBridgeDxe/PciHostBridgeDxe.inf
 236   INF MdeModulePkg/Bus/Pci/PciBusDxe/PciBusDxe.inf
 237   INF OvmfPkg/VirtioPciDeviceDxe/VirtioPciDeviceDxe.inf
 238   INF OvmfPkg/Virtio10Dxe/Virtio10.inf
 239
 240   #
 241   # Video support
 242   #
 243   INF OvmfPkg/QemuVideoDxe/QemuVideoDxe.inf
 244   INF OvmfPkg/PlatformDxe/Platform.inf
 245
 246   #
 247   # USB Support
 248   #
 249   INF MdeModulePkg/Bus/Pci/UhciDxe/UhciDxe.inf
 250   INF MdeModulePkg/Bus/Pci/EhciDxe/EhciDxe.inf
 251   INF MdeModulePkg/Bus/Pci/XhciDxe/XhciDxe.inf
 252   INF MdeModulePkg/Bus/Usb/UsbBusDxe/UsbBusDxe.inf
 253   INF MdeModulePkg/Bus/Usb/UsbKbDxe/UsbKbDxe.inf
 254
 255   #
 256   # TianoCore logo (splash screen)
 257   #
 258   FILE FREEFORM = PCD(gEfiIntelFrameworkModulePkgTokenSpaceGuid.PcdLogoFile) {
 259     SECTION RAW = MdeModulePkg/Logo/Logo.bmp
 260   }
 261
 262 [FV.FVMAIN_COMPACT]
 263 FvAlignment        = 16
 264 ERASE_POLARITY     = 1
 265 MEMORY_MAPPED      = TRUE
 266 STICKY_WRITE       = TRUE
 267 LOCK_CAP           = TRUE
 268 LOCK_STATUS        = TRUE
 269 WRITE_DISABLED_CAP = TRUE
 270 WRITE_ENABLED_CAP  = TRUE
 271 WRITE_STATUS       = TRUE
 272 WRITE_LOCK_CAP     = TRUE
 273 WRITE_LOCK_STATUS  = TRUE
 274 READ_DISABLED_CAP  = TRUE
 275 READ_ENABLED_CAP   = TRUE
 276 READ_STATUS        = TRUE
 277 READ_LOCK_CAP      = TRUE
 278 READ_LOCK_STATUS   = TRUE
 279
 280   INF ArmVirtPkg/PrePi/ArmVirtPrePiUniCoreRelocatable.inf
 281
 282   FILE FV_IMAGE = 9E21FD93-9C72-4c15-8C4B-E77F1DB2D792 {
 283     SECTION GUIDED EE4E5898-3914-4259-9D6E-DC7BD79403CF PROCESSING_REQUIRED = TRUE {
 284       SECTION FV_IMAGE = FVMAIN
 285     }
 286   }
 287
 288
 289 ################################################################################
 290 #
 291 # Rules are use with the [FV] section's module INF type to define
 292 # how an FFS file is created for a given INF file. The following Rule are the default
 293 # rules for the different module type. User can add the customized rules to define the
 294 # content of the FFS file.
 295 #
 296 ################################################################################
 297
 298
 299 ############################################################################
 300 # Example of a DXE_DRIVER FFS file with a Checksum encapsulation section   #
 301 ############################################################################
 302 #
 303 #[Rule.Common.DXE_DRIVER]
 304 #  FILE DRIVER = $(NAMED_GUID) {
 305 #    DXE_DEPEX    DXE_DEPEX               Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
 306 #    COMPRESS PI_STD {
 307 #      GUIDED {
 308 #        PE32     PE32                    $(INF_OUTPUT)/$(MODULE_NAME).efi
 309 #        UI       STRING="$(MODULE_NAME)" Optional
 310 #        VERSION  STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
 311 #      }
 312 #    }
 313 #  }
 314 #
 315 ############################################################################
 316
 317 [Rule.Common.SEC]
 318   FILE SEC = $(NAMED_GUID) RELOCS_STRIPPED FIXED {
 319     TE  TE Align = Auto                 $(INF_OUTPUT)/$(MODULE_NAME).efi
 320   }
 321
 322 [Rule.Common.PEI_CORE]
 323   FILE PEI_CORE = $(NAMED_GUID) FIXED {
 324     TE     TE Align = Auto              $(INF_OUTPUT)/$(MODULE_NAME).efi
 325     UI     STRING ="$(MODULE_NAME)" Optional
 326   }
 327
 328 [Rule.Common.PEIM]
 329   FILE PEIM = $(NAMED_GUID) FIXED {
 330      PEI_DEPEX PEI_DEPEX Optional       $(INF_OUTPUT)/$(MODULE_NAME).depex
 331      TE       TE Align = Auto           $(INF_OUTPUT)/$(MODULE_NAME).efi
 332      UI       STRING="$(MODULE_NAME)" Optional
 333   }
 334
 335 [Rule.Common.PEIM.TIANOCOMPRESSED]
 336   FILE PEIM = $(NAMED_GUID) DEBUG_MYTOOLS_IA32 {
 337     PEI_DEPEX PEI_DEPEX Optional        $(INF_OUTPUT)/$(MODULE_NAME).depex
 338     GUIDED A31280AD-481E-41B6-95E8-127F4C984779 PROCESSING_REQUIRED = TRUE {
 339       PE32      PE32                    $(INF_OUTPUT)/$(MODULE_NAME).efi
 340       UI        STRING="$(MODULE_NAME)" Optional
 341     }
 342   }
 343
 344 [Rule.Common.DXE_CORE]
 345   FILE DXE_CORE = $(NAMED_GUID) {
 346     PE32     PE32                       $(INF_OUTPUT)/$(MODULE_NAME).efi
 347     UI       STRING="$(MODULE_NAME)" Optional
 348   }
 349
 350 [Rule.Common.UEFI_DRIVER]
 351   FILE DRIVER = $(NAMED_GUID) {
 352     DXE_DEPEX    DXE_DEPEX              Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
 353     PE32         PE32                   $(INF_OUTPUT)/$(MODULE_NAME).efi
 354     UI           STRING="$(MODULE_NAME)" Optional
 355   }
 356
 357 [Rule.Common.DXE_DRIVER]
 358   FILE DRIVER = $(NAMED_GUID) {
 359     DXE_DEPEX    DXE_DEPEX              Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
 360     PE32         PE32                   $(INF_OUTPUT)/$(MODULE_NAME).efi
 361     UI           STRING="$(MODULE_NAME)" Optional
 362   }
 363
 364 [Rule.Common.DXE_RUNTIME_DRIVER]
 365   FILE DRIVER = $(NAMED_GUID) {
 366     DXE_DEPEX    DXE_DEPEX              Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
 367     PE32         PE32                   $(INF_OUTPUT)/$(MODULE_NAME).efi
 368     UI           STRING="$(MODULE_NAME)" Optional
 369   }
 370
 371 [Rule.Common.UEFI_APPLICATION]
 372   FILE APPLICATION = $(NAMED_GUID) {
 373     UI     STRING ="$(MODULE_NAME)"     Optional
 374     PE32   PE32                         $(INF_OUTPUT)/$(MODULE_NAME).efi
 375   }
 376
 377 [Rule.Common.UEFI_DRIVER.BINARY]
 378   FILE DRIVER = $(NAMED_GUID) {
 379     DXE_DEPEX DXE_DEPEX Optional      |.depex
 380     PE32      PE32                    |.efi
 381     UI        STRING="$(MODULE_NAME)" Optional
 382     VERSION   STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
 383   }
 384
 385 [Rule.Common.UEFI_APPLICATION.BINARY]
 386   FILE APPLICATION = $(NAMED_GUID) {
 387     PE32      PE32                    |.efi
 388     UI        STRING="$(MODULE_NAME)" Optional
 389     VERSION   STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
 390   }
 391
 392 [Rule.Common.USER_DEFINED.ACPITABLE]
 393   FILE FREEFORM = $(NAMED_GUID) {
 394     RAW       ACPI                    |.acpi
 395     RAW       ASL                     |.aml
 396     UI        STRING="$(MODULE_NAME)" Optional
 397   }