BaseTools/Conf/build_rule.template

   1 #
   2 #  Copyright (c) 2007 - 2018, Intel Corporation. All rights reserved.<BR>
   3 #  Portions copyright (c) 2008 - 2010, Apple Inc. All rights reserved.<BR>
   4 #  This program and the accompanying materials
   5 #  are licensed and made available under the terms and conditions of the BSD License
   6 #  which accompanies this distribution.  The full text of the license may be found at
   7 #  http://opensource.org/licenses/bsd-license.php
   8
   9 #  THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
  10 #  WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
  11 #
  12
  13 ## Syntax
  14 #
  15 # "*" is used to indicate that the source files will be processed at the same time.
  16 # "?" is used to indicate that the source files will be processed one by one.
  17 #
  18 # "[" <File-Type>[.<Build-Type>][.<Arch>][, <File-Type>[.<Build-Type>][.<Arch>]] "]" <EOL>
  19 #   <InputFile[.<ToolChainFamily>]> <EOL>
  20 #       (?|*).<File-Extension> [(\n|,) (?|*).<File-Extension>]
  21 #
  22 #   <OutputFile[.<ToolChainFamily>]> <EOL>
  23 #       <FileFullPath>
  24 #
  25 #   <ExtraDependency>
  26 #       <FileFullPath>
  27 #
  28 #   <Command[.<ToolChainFamily>]> <EOL>
  29 #       <Command1>
  30 #       [<Command2>]
  31 #
  32 # <Build-Type> is the MODULE_TYPE in EDK2 or COMPONENT_TYPE  in EDK.
  33 # Missing <InputFile> will cause an exception and break build.
  34 # Missing <Command> will cause that related build target won't be generated but
  35 #   won't break build.
  36 #
  37
  38 ## Placeholders for string substitution
  39 #
  40 #   ${src}      Source file(s) to be built (full path)
  41 #   ${s_path}   Source file directory (absolute path)
  42 #   ${s_dir}    Source file relative directory within a module
  43 #               (Note: ${s_dir} is always equals to "." if source file is given in absolute path.)
  44 #   ${s_name}   Source file name without path
  45 #   ${s_base}   Source file name without extension and path
  46 #   ${s_ext}    Source file extension
  47 #
  48 #   ${dst}      Destination file(s) built from ${src} (full path)
  49 #   ${d_path}   Destination file directory (absolute path)
  50 #   ${d_name}   Destination file name without path
  51 #   ${d_base}   Destination file name without extension and path
  52 #   ${d_ext}    Destination file extension
  53 #
  54 #   (+)         Directory separator
  55 #
  56
  57 ## Macro
  58 #   $(WORKSPACE)        Workspace directory
  59 #   $(OUTPUT_DIR)       Directory for intermediate files for building a module
  60 #   $(DEBUG_DIR)        Directory for files used to debug a module
  61 #   $(BUILD_DIR)        All files for building a platform will be put in this directory
  62 #   $(BIN_DIR)          Common directory for executable files
  63 #   $(FV_DIR)           Directory to store flash image files
  64 #   $(INC)              Search path of current module
  65 #   $(NASM_INC)         Search nasm file path of current module
  66 #   $(INC_LIST)         A file containing search pathes of current module
  67 #   $(LIBS)             Static library files of current module
  68 #   $(<tool>_FLAGS)     Tools flags of current module
  69 #   $(MODULE_NAME)      Current module name
  70 #   $(MODULE_NAME_GUID) Current module name with module FILE_GUID if same $(MODULE_NAME) exists
  71 #                       in different modules, otherwise its value is same as $(MODULE_NAME)
  72 #   $(MODULE_TYPE)      Current module type
  73 #   $(MODULE_GUID)      Current module guid
  74 #   $(ARCH)             Architecture of current module
  75 #   $(TOOLCHAIN)        Toolchain used to build current module
  76 #   $(TARGET)           Target of current module (DEBUG/RELEASE)
  77 #   $(<tool>)           Path of tool
  78 #   $(EDK_TOOLS_PATH)   Path of build tools
  79 #   $(<FILE_TYPES>)     File list of each file type
  80 #                       (Note: The macro name is derived from file type name. For example,
  81 #                        C-Code-File will have C_CODE_FILES macro.)
  82 #   $(<FILE_TYPES_LIST>) Macro point to a file containing list of files of a file type
  83 #                       (
  84 #                        Note: The macro and file name are derived from file type name.
  85 #                        For example, C-Code-File will have C_CODE_FILES_LIST macro pointing
  86 #                        to $(OUTPUT_DIR)/c_code_files.lst. The list file and macro name
  87 #                        will be generated only when this macro is used in command line.
  88 #                        This is intended to get over the long command line limitation.
  89 #                       )
  90 #
  91 #   $(CP)     copy command
  92 #   $(MV)     move command
  93 #   $(RM)     delete command
  94 #   $(MD)     create dir command
  95 #   $(RD)     remove dir command
  96 #
  97
  98 ## Reserved File-Type
  99 #
 100 # Don't change following names of file types and their associated files,
 101 # which are also used in tools' code
 102 #
 103 #   C-Code-File
 104 #   C-Header-File
 105 #   Dynamic-Library-File
 106 #   Static-Library-File
 107 #   Visual-Form-Representation-File
 108 #   Unicode-Text-File
 109 #
 110
 111 ## Build Rule Version Number
 112 #  build_rule_version=0.1
 113 #
 114
 115 [C-Code-File]
 116     <InputFile>
 117         ?.c
 118         ?.C
 119         ?.cc
 120         ?.CC
 121         ?.cpp
 122         ?.Cpp
 123         ?.CPP
 124
 125     <ExtraDependency>
 126         $(MAKE_FILE)
 127
 128     <OutputFile>
 129         $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj
 130
 131     <Command.MSFT, Command.INTEL>
 132         "$(CC)" /Fo${dst} $(CC_FLAGS) $(INC) ${src}
 133
 134     <Command.GCC, Command.GCCLD, Command.RVCT>
 135         # For RVCTCYGWIN CC_FLAGS must be first to work around pathing issues
 136         "$(CC)" $(CC_FLAGS) -c -o ${dst} $(INC) ${src}
 137
 138     <Command.XCODE>
 139         "$(CC)" $(CC_FLAGS) -o ${dst} $(INC) ${src}
 140
 141 [C-Code-File.BASE.AARCH64,C-Code-File.SEC.AARCH64,C-Code-File.PEI_CORE.AARCH64,C-Code-File.PEIM.AARCH64,C-Code-File.BASE.ARM,C-Code-File.SEC.ARM,C-Code-File.PEI_CORE.ARM,C-Code-File.PEIM.ARM]
 142     <InputFile>
 143         ?.c
 144
 145     <ExtraDependency>
 146         $(MAKE_FILE)
 147
 148     <OutputFile>
 149         $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj
 150
 151     <Command.GCC, Command.GCCLD, Command.RVCT>
 152         "$(CC)" $(CC_FLAGS) $(CC_XIPFLAGS) -c -o ${dst} $(INC) ${src}
 153
 154 [C-Header-File]
 155     <InputFile>
 156         *.h, *.H
 157
 158     <OutputFile>
 159
 160     <Command>
 161
 162 [Assembly-Code-File.COMMON.COMMON]
 163     <InputFile.MSFT, InputFile.INTEL, InputFile.RVCT>
 164         ?.asm, ?.Asm, ?.ASM
 165
 166     <InputFile.GCC, InputFile.GCCLD>
 167         ?.S, ?.s
 168
 169     <ExtraDependency>
 170         $(MAKE_FILE)
 171
 172     <OutputFile>
 173         $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj
 174
 175     <Command.MSFT, Command.INTEL>
 176         "$(PP)" $(PP_FLAGS) $(INC) ${src} > ${d_path}(+)${s_base}.i
 177         Trim --source-code --convert-hex --trim-long -o ${d_path}(+)${s_base}.iii ${d_path}(+)${s_base}.i
 178         "$(ASM)" /Fo${dst} $(ASM_FLAGS) /I${s_path} $(INC) ${d_path}(+)${s_base}.iii
 179
 180     <Command.GCC, Command.GCCLD, Command.RVCT>
 181         "$(PP)" $(PP_FLAGS) $(INC) ${src} > ${d_path}(+)${s_base}.i
 182         Trim --trim-long --source-code -o ${d_path}(+)${s_base}.iii ${d_path}(+)${s_base}.i
 183         # For RVCTCYGWIN ASM_FLAGS must be first to work around pathing issues
 184         "$(ASM)" $(ASM_FLAGS) -o ${dst} $(INC) ${d_path}(+)${s_base}.iii
 185
 186 [Assembly-Code-File.COMMON.ARM,Assembly-Code-File.COMMON.AARCH64]
 187     # Remove --convert-hex for ARM as it breaks MSFT assemblers
 188     <InputFile.MSFT, InputFile.INTEL, InputFile.RVCT>
 189         ?.asm, ?.Asm, ?.ASM
 190
 191     <InputFile.GCC, InputFile.GCCLD>
 192         ?.S, ?.s
 193
 194     <ExtraDependency>
 195         $(MAKE_FILE)
 196
 197     <OutputFile>
 198         $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj
 199
 200     <Command.INTEL>
 201         "$(PP)" $(PP_FLAGS) $(INC) ${src} > ${d_path}(+)${s_base}.i
 202         Trim --source-code --convert-hex --trim-long -o ${d_path}(+)${s_base}.iii ${d_path}(+)${s_base}.i
 203         "$(ASM)" /Fo${dst} $(ASM_FLAGS) /I${s_path} $(INC) ${d_path}(+)${s_base}.iii
 204
 205     <Command.MSFT>
 206         "$(PP)" $(PP_FLAGS) $(INC) ${src} > ${d_path}(+)${s_base}.i
 207         Trim --source-code --trim-long -o ${d_path}(+)${s_base}.iii ${d_path}(+)${s_base}.i
 208         "$(ASM)" /Fo${dst} $(ASM_FLAGS) /I${s_path} $(INC) ${d_path}(+)${s_base}.iii
 209
 210     <Command.GCC, Command.GCCLD, Command.RVCT>
 211         "$(PP)" $(PP_FLAGS) $(INC) ${src} > ${d_path}(+)${s_base}.i
 212         Trim --trim-long --source-code -o ${d_path}(+)${s_base}.iii ${d_path}(+)${s_base}.i
 213         # For RVCTCYGWIN ASM_FLAGS must be first to work around pathing issues
 214         "$(ASM)" $(ASM_FLAGS) -o ${dst} $(INC) ${d_path}(+)${s_base}.iii
 215
 216 [Nasm-Assembly-Code-File.COMMON.COMMON]
 217     <InputFile>
 218         ?.nasm
 219
 220     <ExtraDependency>
 221         $(MAKE_FILE)
 222
 223     <OutputFile>
 224         $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj
 225
 226     <Command>
 227         "$(PP)" $(PP_FLAGS) $(INC) ${src} > ${d_path}(+)${s_base}.i
 228         Trim --trim-long --source-code -o ${d_path}(+)${s_base}.iii ${d_path}(+)${s_base}.i
 229         "$(NASM)" -I${s_path}(+) $(NASM_INC) $(NASM_FLAGS) -o $dst ${d_path}(+)${s_base}.iii
 230
 231 [Device-Tree-Source-File]
 232     <InputFile>
 233         ?.dts
 234
 235     <ExtraDependency>
 236         $(MAKE_FILE)
 237
 238     <OutputFile>
 239         $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.dtb
 240
 241     <Command.GCC>
 242         "$(DTCPP)" $(DTCPP_FLAGS) $(INC) ${src} > ${d_path}(+)${s_base}.i
 243         "$(DTC)" $(DTC_FLAGS) -I dts -O dtb -o ${dst} ${d_path}(+)${s_base}.i
 244
 245 [Visual-Form-Representation-File]
 246     <InputFile>
 247         ?.vfr
 248         ?.Vfr
 249         ?.VFR
 250
 251     <ExtraDependency>
 252         $(MAKE_FILE)
 253
 254     <OutputFile>
 255         $(DEBUG_DIR)(+)${s_dir}(+)${s_base}.c
 256
 257     <Command>
 258         "$(VFRPP)" $(VFRPP_FLAGS) $(INC) ${src} > $(OUTPUT_DIR)(+)${s_base}.i
 259         "$(VFR)" $(VFR_FLAGS) --string-db $(OUTPUT_DIR)(+)$(MODULE_NAME)StrDefs.hpk --output-directory ${d_path} $(OUTPUT_DIR)(+)${s_base}.i
 260
 261 [Object-File]
 262     <InputFile>
 263         *.obj
 264         *.o
 265
 266     <OutputFile>
 267         $(OUTPUT_DIR)(+)$(MODULE_NAME).lib
 268
 269     <Command.MSFT, Command.INTEL>
 270         "$(SLINK)" $(SLINK_FLAGS) /OUT:${dst} @$(OBJECT_FILES_LIST)
 271
 272     <Command.GCC, Command.GCCLD>
 273         $(RM) ${dst}
 274         "$(SLINK)" cr ${dst} $(SLINK_FLAGS) @$(OBJECT_FILES_LIST)
 275
 276     <Command.RVCT>
 277         "$(SLINK)" $(SLINK_FLAGS) ${dst} --via $(OBJECT_FILES_LIST)
 278
 279     <Command.RVCTCYGWIN>
 280         # $(OBJECT_FILES_LIST) has wrong paths for cygwin
 281         "$(SLINK)" $(SLINK_FLAGS) ${dst} $(OBJECT_FILES)
 282
 283     <Command.XCODE>
 284         "$(SLINK)" $(SLINK_FLAGS) ${dst} -filelist $(OBJECT_FILES_LIST)
 285
 286 [Static-Library-File]
 287     <InputFile>
 288         *.lib
 289
 290     <ExtraDependency>
 291         $(MAKE_FILE)
 292
 293     <OutputFile>
 294         $(DEBUG_DIR)(+)$(MODULE_NAME).dll
 295
 296     <Command.MSFT, Command.INTEL>
 297         "$(DLINK)" /OUT:${dst} $(DLINK_FLAGS) $(DLINK2_FLAGS) $(DLINK_SPATH) @$(STATIC_LIBRARY_FILES_LIST)
 298         "$(DLINK)" /OUT:${dst} $(DLINK_FLAGS) $(DLINK_SPATH) @$(STATIC_LIBRARY_FILES_LIST)
 299
 300     <Command.GCC>
 301         "$(DLINK)" -o ${dst} $(DLINK_FLAGS) -Wl,--start-group,@$(STATIC_LIBRARY_FILES_LIST),--end-group $(CC_FLAGS) $(DLINK2_FLAGS)
 302         "$(OBJCOPY)" $(OBJCOPY_FLAGS) ${dst}
 303
 304     <Command.GCCLD>
 305         "$(DLINK)" -o ${dst} $(DLINK_FLAGS) --start-group $(DLINK_SPATH) @$(STATIC_LIBRARY_FILES_LIST) --end-group $(DLINK2_FLAGS)
 306         "$(OBJCOPY)" $(OBJCOPY_FLAGS) ${dst}
 307
 308     <Command.RVCT>
 309         "$(DLINK)" $(DLINK_FLAGS) -o ${dst} $(DLINK_SPATH) --via $(STATIC_LIBRARY_FILES_LIST) $(DLINK2_FLAGS)
 310
 311     <Command.RVCTCYGWIN>
 312         #$(STATIC_LIBRARY_FILES_LIST) has wrong paths for cygwin
 313         "$(DLINK)" $(DLINK_FLAGS) -o ${dst} $(DLINK_SPATH) $(STATIC_LIBRARY_FILES) $(DLINK2_FLAGS)
 314
 315     <Command.XCODE>
 316         "$(DLINK)" $(DLINK_FLAGS) -o ${dst} $(DLINK_SPATH) -filelist $(STATIC_LIBRARY_FILES_LIST)  $(DLINK2_FLAGS)
 317
 318
 319 [Static-Library-File.SEC.AARCH64, Static-Library-File.PEI_CORE.AARCH64, Static-Library-File.PEIM.AARCH64,Static-Library-File.SEC.ARM, Static-Library-File.PEI_CORE.ARM, Static-Library-File.PEIM.ARM]
 320     <InputFile>
 321         *.lib
 322
 323     <ExtraDependency>
 324         $(MAKE_FILE)
 325
 326     <OutputFile>
 327         $(DEBUG_DIR)(+)$(MODULE_NAME).dll
 328
 329     <Command.GCC>
 330         "$(DLINK)" -o ${dst} $(DLINK_FLAGS) $(DLINK_XIPFLAGS) -Wl,--start-group,@$(STATIC_LIBRARY_FILES_LIST),--end-group $(CC_FLAGS) $(CC_XIPFLAGS) $(DLINK2_FLAGS)
 331         "$(OBJCOPY)" $(OBJCOPY_FLAGS) ${dst}
 332
 333
 334 [Static-Library-File.USER_DEFINED]
 335     <InputFile>
 336         *.lib
 337
 338     <ExtraDependency>
 339         $(MAKE_FILE)
 340
 341     <OutputFile>
 342         $(DEBUG_DIR)(+)$(MODULE_NAME)
 343
 344     <Command.MSFT, Command.INTEL>
 345         "$(DLINK)" $(DLINK_FLAGS) $(DLINK_SPATH) @$(STATIC_LIBRARY_FILES_LIST)
 346
 347     <Command.GCC>
 348         "$(DLINK)" $(DLINK_FLAGS) -Wl,--start-group,@$(STATIC_LIBRARY_FILES_LIST),--end-group $(DLINK2_FLAGS)
 349
 350     <Command.GCCLD>
 351         "$(DLINK)" $(DLINK_FLAGS) --start-group $(DLINK_SPATH) @$(STATIC_LIBRARY_FILES_LIST) --end-group $(DLINK2_FLAGS)
 352
 353     <Command.RVCT>
 354         "$(DLINK)" $(DLINK_FLAGS) -o ${dst} $(DLINK_SPATH) --via $(STATIC_LIBRARY_FILES_LIST) $(DLINK2_FLAGS)
 355
 356     <Command.RVCTCYGWIN>
 357         #$(STATIC_LIBRARY_FILES_LIST) has the wrong paths for cygwin
 358         "$(DLINK)" $(DLINK_FLAGS) -o ${dst} $(DLINK_SPATH) $(STATIC_LIBRARY_FILES) $(DLINK2_FLAGS)
 359
 360     <Command.XCODE>
 361         "$(DLINK)" -o ${dst} $(DLINK_FLAGS)  $(DLINK_SPATH) -filelist $(STATIC_LIBRARY_FILES_LIST)  $(DLINK2_FLAGS)
 362
 363
 364 [Dynamic-Library-File]
 365     <InputFile>
 366         ?.dll
 367
 368     <OutputFile>
 369         $(DEBUG_DIR)(+)$(MODULE_NAME).efi
 370
 371     <Command.MSFT, Command.INTEL, Command.RVCT>
 372         "$(GENFW)" -e $(MODULE_TYPE) -o ${dst} ${src} $(GENFW_FLAGS)
 373         $(CP) ${dst} $(OUTPUT_DIR)
 374         $(CP) ${dst} $(BIN_DIR)(+)$(MODULE_NAME_GUID).efi
 375         -$(CP) $(DEBUG_DIR)(+)*.map $(OUTPUT_DIR)
 376         -$(CP) $(DEBUG_DIR)(+)*.pdb $(OUTPUT_DIR)
 377     <Command.GCC, Command.GCCLD>
 378         $(CP) ${src} $(DEBUG_DIR)(+)$(MODULE_NAME).debug
 379         $(OBJCOPY) --strip-unneeded -R .eh_frame ${src}
 380
 381         #
 382         #The below 2 lines are only needed for UNIXGCC tool chain, which genereates PE image directly
 383         #
 384         -$(OBJCOPY) $(OBJCOPY_ADDDEBUGFLAG) ${src}
 385         -$(CP) $(DEBUG_DIR)(+)$(MODULE_NAME).debug $(BIN_DIR)(+)$(MODULE_NAME_GUID).debug
 386
 387         "$(GENFW)" -e $(MODULE_TYPE) -o ${dst} ${src} $(GENFW_FLAGS)
 388         $(CP) ${dst} $(OUTPUT_DIR)
 389         $(CP) ${dst} $(BIN_DIR)(+)$(MODULE_NAME_GUID).efi
 390         -$(CP) $(DEBUG_DIR)(+)*.map $(OUTPUT_DIR)
 391
 392     <Command.XCODE>
 393         # tool to convert Mach-O to PE/COFF
 394         "$(MTOC)" -subsystem $(MODULE_TYPE)  $(MTOC_FLAGS)  ${src}  $(DEBUG_DIR)(+)$(MODULE_NAME).pecoff
 395         # create symbol file for GDB debug
 396         -$(DSYMUTIL) ${src}
 397         "$(GENFW)" -e $(MODULE_TYPE) -o ${dst} $(DEBUG_DIR)(+)$(MODULE_NAME).pecoff $(GENFW_FLAGS)
 398         $(CP) ${dst} $(OUTPUT_DIR)
 399         $(CP) ${dst} $(BIN_DIR)(+)$(MODULE_NAME_GUID).efi
 400         -$(CP) $(DEBUG_DIR)(+)*.map $(OUTPUT_DIR)
 401
 402 [Dependency-Expression-File]
 403     <InputFile>
 404         ?.dxs, ?.Dxs, ?.DXS
 405
 406     <OutputFile>
 407         $(OUTPUT_DIR)(+)$(MODULE_NAME).depex
 408
 409     <ExtraDependency>
 410         $(MAKE_FILE)
 411
 412     <Command>
 413         "$(PP)" $(APP_FLAGS) $(INC) ${src} > $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.i
 414         Trim --source-code -o $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.iii $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.i
 415         GenDepex -t $(MODULE_TYPE) -o ${dst} $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.iii
 416
 417 [Acpi-Source-Language-File]
 418     <InputFile>
 419         ?.asl, ?.Asl, ?.ASL
 420
 421     <OutputFile>
 422         $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.aml
 423
 424     <ExtraDependency>
 425         $(MAKE_FILE)
 426
 427     <Command.MSFT, Command.INTEL>
 428         Trim --asl-file -o $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.i -i $(INC_LIST) ${src}
 429         "$(ASLPP)" $(ASLPP_FLAGS) $(INC) /I${s_path} $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.i > $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.iii
 430         Trim --source-code -l -o $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.iiii $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.iii
 431         "$(ASL)" $(ASL_FLAGS) $(ASL_OUTFLAGS)${dst} $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.iiii
 432
 433     <Command.GCC, Command.GCCLD>
 434         Trim --asl-file -o $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.i -i $(INC_LIST) ${src}
 435         "$(ASLPP)" $(ASLPP_FLAGS) $(INC) -I${s_path} $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.i > $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.iii
 436         Trim --source-code -l -o $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.iiii $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.iii
 437         "$(ASL)" $(ASL_FLAGS) $(ASL_OUTFLAGS)${dst} $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.iiii
 438
 439 [C-Code-File.AcpiTable]
 440     <InputFile>
 441         ?.c
 442
 443     <OutputFile>
 444         $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.acpi
 445
 446     <ExtraDependency>
 447         $(MAKE_FILE)
 448
 449     <Command.MSFT, Command.INTEL>
 450         "$(ASLCC)" /Fo$(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj $(ASLCC_FLAGS) $(INC) ${src}
 451         "$(ASLDLINK)" /OUT:$(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.dll $(ASLDLINK_FLAGS) $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj
 452         "$(GENFW)" -o ${dst} -c $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.dll $(GENFW_FLAGS)
 453
 454     <Command.GCC, Command.GCCLD>
 455         "$(ASLCC)" -c -o $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj $(CC_FLAGS) $(ASLCC_FLAGS) $(INC) ${src}
 456         "$(ASLDLINK)" -o $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.dll $(ASLDLINK_FLAGS) $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj
 457         "$(GENFW)" -o ${dst} -c $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.dll $(GENFW_FLAGS)
 458
 459 [Acpi-Table-Code-File]
 460     <InputFile>
 461         ?.aslc, ?.act
 462
 463     <OutputFile>
 464         $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.acpi
 465
 466     <ExtraDependency>
 467         $(MAKE_FILE)
 468
 469     <Command.MSFT, Command.INTEL>
 470         "$(ASLCC)" /Fo$(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj $(ASLCC_FLAGS) $(INC) ${src}
 471         "$(ASLDLINK)" /OUT:$(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.dll $(ASLDLINK_FLAGS) $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj
 472         "$(GENFW)" -o ${dst} -c $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.dll $(GENFW_FLAGS)
 473
 474     <Command.GCC, Command.GCCLD>
 475         "$(ASLCC)" -c -o $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj $(CC_FLAGS) $(ASLCC_FLAGS) $(INC) ${src}
 476         "$(ASLDLINK)" -o $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.dll $(ASLDLINK_FLAGS) $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj
 477         "$(GENFW)" -o ${dst} -c $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.dll $(GENFW_FLAGS)
 478
 479     <Command.XCODE>
 480         "$(ASLCC)" -o $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj  $(ASLCC_FLAGS) $(INC) ${src}
 481         "$(ASLDLINK)" -o $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.dll $(ASLDLINK_FLAGS) $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj
 482         "$(MTOC)" -subsystem $(MODULE_TYPE)  $(MTOC_FLAGS) $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.dll $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.pecoff
 483         "$(GENFW)" -o ${dst} -c $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.pecoff $(GENFW_FLAGS)
 484
 485
 486 [Masm16-Code-File]
 487     <InputFile>
 488         ?.asm16, ?.Asm16, ?.ASM16, ?.s16, ?.S16
 489
 490     <ExtraDependency>
 491         $(MAKE_FILE)
 492
 493     <OutputFile>
 494         $(OUTPUT_DIR)(+)${s_base}.com
 495
 496     <Command.MSFT, Command.INTEL>
 497         "$(PP)" $(PP_FLAGS) $(INC) ${src} > ${d_path}(+)${s_base}.i
 498         Trim --source-code --convert-hex --trim-long -o ${d_path}(+)${s_base}.iii ${d_path}(+)${s_base}.i
 499         cd $(OUTPUT_DIR)(+)${s_dir}
 500         "$(ASM16)" /nologo /c /omf $(INC) /Fo$(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj ${d_path}(+)${s_base}.iii
 501         "$(ASMLINK)" $(ASMLINK_FLAGS) $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj,${dst},,,,
 502
 503     <Command.GCC, Command.GCCLD>
 504       "$(PP)" $(PP_FLAGS) $(INC) ${src} > ${d_path}(+)${s_base}.i
 505       Trim --source-code -o ${d_path}(+)${s_base}.iii ${d_path}(+)${s_base}.i
 506       "$(ASM)" -o $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj $(ASM_FLAGS) $(INC) ${d_path}(+)${s_base}.iii
 507       "$(DLINK)" -o ${dst} $(DLINK_FLAGS) --start-group $(DLINK_SPATH) $(LIBS) $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj --end-group
 508
 509     <Command.XCODE>
 510       "$(PP)" $(PP_FLAGS) $(INC) ${src} > ${d_path}(+)${s_base}.i
 511       Trim --source-code -o ${d_path}(+)${s_base}.iii ${d_path}(+)${s_base}.i
 512       "$(ASM)" -o $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj $(ASM_FLAGS) $(INC) ${d_path}(+)${s_base}.iii
 513       "$(SLINK)" $(SLINK_FLAGS) $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.slib $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.obj
 514       otool -t $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.slib | hex2bin.py ${dst}
 515
 516
 517 [Nasm-to-Binary-Code-File]
 518     <InputFile>
 519         ?.nasmb
 520
 521     <ExtraDependency>
 522         $(MAKE_FILE)
 523
 524     <OutputFile>
 525         $(OUTPUT_DIR)(+)${s_base}.bin
 526
 527     <Command>
 528         "$(PP)" $(PP_FLAGS) $(INC) ${src} > ${d_path}(+)${s_base}.i
 529         Trim --source-code --convert-hex -o ${d_path}(+)${s_base}.iii ${d_path}(+)${s_base}.i
 530         "$(NASM)" -I${s_path}(+) -l ${d_path}(+)${s_base}.lst $(NASMB_FLAGS) -o $dst ${d_path}(+)${s_base}.iii
 531         # copy the output file with .com postfix that be same to the output file of .asm16
 532         $(CP) ${dst} $(OUTPUT_DIR)(+)${s_base}.com
 533
 534 [Microcode-File.USER_DEFINED, Microcode-File.Microcode]
 535     <InputFile>
 536         ?.txt, ?.TXT, ?.Txt, ?.mut, ?.inc
 537
 538     <OutputFile>
 539         $(OUTPUT_DIR)(+)${s_base}.mcb
 540
 541     <Command>
 542         "$(GENFW)" -o ${dst} -m ${src} $(GENFW_FLAGS)
 543
 544 [Microcode-Binary-File]
 545     <InputFile>
 546         *.mcb
 547
 548     <ExtraDependency>
 549         $(MAKE_FILE)
 550
 551     <OutputFile>
 552         $(OUTPUT_DIR)(+)$(MODULE_NAME).bin
 553
 554     <Command>
 555         "$(GENFW)" -o ${dst} -j $(MICROCODE_BINARY_FILES) $(GENFW_FLAGS)
 556         -$(CP) ${dst} $(BIN_DIR)(+)$(MODULE_NAME_GUID).bin
 557
 558 [EFI-Image-File]
 559     <InputFile>
 560         ?.efi, ?.Efi, ?.EFI
 561
 562     <OutputFile>
 563
 564     <Command>
 565
 566 [Unicode-Text-File]
 567     <InputFile>
 568         *.uni, *.Uni, *.UNI
 569
 570     <OutputFile>
 571         $(DEBUG_DIR)(+)AutoGen.c
 572         $(DEBUG_DIR)(+)$(MODULE_NAME)StrDefs.h
 573         $(OUTPUT_DIR)(+)$(MODULE_NAME)StrDefs.hpk
 574
 575     <Command>
 576
 577 [Image-Definition-File]
 578     <InputFile>
 579         *.idf, *.Idf, *.IDF
 580
 581     <OutputFile>
 582         $(DEBUG_DIR)(+)AutoGen.c
 583         $(DEBUG_DIR)(+)$(MODULE_NAME)ImgDefs.h
 584         $(OUTPUT_DIR)(+)$(MODULE_NAME)Idf.hpk
 585
 586     <Command>
 587
 588 [Efi-Image.UEFI_OPTIONROM]
 589     <InputFile>
 590         ?.efi, ?.EFI, ?.Efi
 591
 592     <OutputFile>
 593         $(BIN_DIR)(+)$(MODULE_NAME_GUID).rom
 594
 595     <Command>
 596         $(OPTROM) -i $(PCI_DEVICE_ID) -f $(PCI_VENDOR_ID) -l $(PCI_CLASS_CODE) -r $(PCI_REVISION) -o $dst $(OPTROM_FLAGS) $src
 597
 598 [Unicode-Text-File.UEFI_HII]
 599     <InputFile>
 600         *.uni, *.Uni, *.UNI
 601
 602     <OutputFile>
 603         $(OUTPUT_DIR)(+)$(MODULE_NAME)StrDefs.hpk
 604         $(DEBUG_DIR)(+)$(MODULE_NAME)StrDefs.h
 605
 606     <Command>
 607
 608 [Image-Definition-File.UEFI_HII]
 609     <InputFile>
 610         *.idf, *.Idf, *.IDF
 611
 612     <OutputFile>
 613         $(DEBUG_DIR)(+)$(MODULE_NAME)ImgDefs.h
 614         $(OUTPUT_DIR)(+)$(MODULE_NAME)Idf.hpk
 615
 616     <Command>
 617
 618 [Visual-Form-Representation-File.UEFI_HII]
 619     <InputFile>
 620         ?.vfr
 621         ?.Vfr
 622         ?.VFR
 623
 624     <ExtraDependency>
 625         $(MAKE_FILE)
 626
 627     <OutputFile>
 628         $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.hpk
 629
 630     <Command>
 631         "$(VFRPP)" $(VFRPP_FLAGS) $(INC) ${src} > $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.i
 632         "$(VFR)" $(VFR_FLAGS) --create-ifr-package --string-db $(OUTPUT_DIR)(+)$(MODULE_NAME)StrDefs.hpk --output-directory $(OUTPUT_DIR)(+)${s_dir} $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.i
 633
 634 [Hii-Binary-Package.UEFI_HII]
 635     <InputFile>
 636         *.hpk
 637
 638     <OutputFile.MSFT, OutputFile.INTEL, OutputFile.GCC>
 639         $(OUTPUT_DIR)(+)$(MODULE_NAME)hii.lib
 640
 641     <OutputFile.XCODE, OutputFile.RVCT>
 642         $(OUTPUT_DIR)(+)$(MODULE_NAME)hii.rc
 643
 644     <Command.MSFT, Command.INTEL>
 645         "$(GENFW)" -o $(OUTPUT_DIR)(+)$(MODULE_NAME)hii.rc -g $(MODULE_GUID) --hiipackage $(HII_BINARY_PACKAGES) $(GENFW_FLAGS)
 646         "$(RC)" /Fo${dst} $(OUTPUT_DIR)(+)$(MODULE_NAME)hii.rc
 647
 648     <Command.GCC, Command.GCCLD>
 649         "$(GENFW)" -o $(OUTPUT_DIR)(+)$(MODULE_NAME)hii.rc -g $(MODULE_GUID) --hiibinpackage $(HII_BINARY_PACKAGES) $(GENFW_FLAGS)
 650         "$(RC)" $(RC_FLAGS) $(OUTPUT_DIR)(+)$(MODULE_NAME)hii.rc ${dst}
 651
 652     <Command.XCODE, Command.RVCT>
 653         GenFw -o $(OUTPUT_DIR)(+)$(MODULE_NAME)hii.rc -g $(MODULE_GUID) --hiibinpackage $(HII_BINARY_PACKAGES)
 654
 655