BaseTools/Source/Python/Ecc/config.ini

   1 ## @file
   2 # This file is used to set configuration of ECC tool
   3 # For the items listed below, 1 means valid, 0 means invalid
   4 #
   5 # Copyright (c) 2007 - 2015, Intel Corporation. All rights reserved.<BR>
   6 # This program and the accompanying materials
   7 # are licensed and made available under the terms and conditions of the BSD License
   8 # which accompanies this distribution.  The full text of the license may be found at
   9 # http://opensource.org/licenses/bsd-license.php
  10 #
  11 # THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
  12 # WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
  13 #
  14
  15 #
  16 # Identify the version of current configuration
  17 #
  18 Version = 0.1
  19
  20 #
  21 # Identify to if check all items
  22 # 1 - Check all items and ignore all other detailed items
  23 # 0 - Not check all items, the tool will go through all other detailed items to decide to check or not
  24 #
  25 CheckAll = 0
  26
  27 #
  28 # Identify to if automatically correct mistakes
  29 # 1 - Automatically correct
  30 # 0 - Not automatically correct
  31 # Only the following check points can be automatically corrected, others not listed below are not supported even it is 1
  32 #
  33 # GeneralCheckTab
  34 # GeneralCheckIndentation
  35 # GeneralCheckLine
  36 # GeneralCheckCarriageReturn
  37 # SpaceCheckAll
  38 #
  39 AutoCorrect = 1
  40
  41 #
  42 # List customized Modifer here, split with ','
  43 #
  44 ModifierList = IN, OUT, OPTIONAL, UNALIGNED, EFI_RUNTIMESERVICE, EFI_BOOTSERVICE, EFIAPI, TPMINTERNALAPI, STATIC
  45
  46 #
  47 # General Checking
  48 #
  49 GeneralCheckAll = 0
  50
  51 # Check whether NO Tab is used, replaced with spaces
  52 GeneralCheckNoTab = 1
  53 # The width of Tab
  54 GeneralCheckTabWidth = 2
  55 # Check whether the indentation is followed coding style
  56 GeneralCheckIndentation = 1
  57 # The width of indentation
  58 GeneralCheckIndentationWidth = 2
  59 # Check whether no line is exceeding defined widty
  60 GeneralCheckLine = 1
  61 # The width of a line
  62 GeneralCheckLineWidth = 120
  63 # Check whether no use of _asm in the source file
  64 GeneralCheckNo_Asm = 1
  65 # Check whether no use of "#progma" in source file except "#pragma pack(#)".
  66 GeneralCheckNoProgma = 1
  67 # Check whether there is a carriage return at the end of the file
  68 GeneralCheckCarriageReturn = 1
  69 # Check whether the file exists
  70 GeneralCheckFileExistence = 1
  71 # Check whether file has non ACSII char
  72 GeneralCheckNonAcsii = 1
  73 # Check whether UNI file is valid
  74 GeneralCheckUni = 1
  75 # Check Only use CRLF (Carriage Return Line Feed) line endings.
  76 GeneralCheckLineEnding = 1
  77 # Check if there is no trailing white space in one line.
  78 GeneralCheckTrailingWhiteSpaceLine = 1
  79
  80 #
  81 # Space Checking
  82 #
  83 SpaceCheckAll = 1
  84
  85 #
  86 # Predicate Expression Checking
  87 #
  88 PredicateExpressionCheckAll = 0
  89
  90 # Check whether Boolean values, variable type BOOLEAN not use explicit comparisons to TRUE or FALSE
  91 PredicateExpressionCheckBooleanValue = 1
  92 # Check whether Non-Boolean comparisons use a compare operator (==, !=, >, < >=, <=).
  93 PredicateExpressionCheckNonBooleanOperator = 1
  94 # Check whether a comparison of any pointer to zero must be done via the NULL type
  95 PredicateExpressionCheckComparisonNullType = 1
  96
  97 #
  98 # Headers Checking
  99 #
 100 HeaderCheckAll = 0
 101
 102 # Check whether File header exists
 103 HeaderCheckFile = 1
 104 # Check whether Function header exists
 105 HeaderCheckFunction = 1
 106 # Check whether Meta data File header Comment End with '##'
 107 HeaderCheckFileCommentEnd = 0
 108 # Check whether C File header Comment content start with two spaces
 109 HeaderCheckCFileCommentStartSpacesNum = 0
 110 # Check whether C File header Comment's each reference at list should begin with a bullet character '-'
 111 HeaderCheckCFileCommentReferenceFormat = 0
 112 # Check whether C File header Comment have the License immediately after the ""Copyright"" line
 113 HeaderCheckCFileCommentLicenseFormat = 0
 114
 115 #
 116 # C Function Layout Checking
 117 #
 118 CFunctionLayoutCheckAll = 0
 119
 120 # Check whether return type exists and in the first line
 121 CFunctionLayoutCheckReturnType = 1
 122 # Check whether any optional functional modifiers exist and next to the return type
 123 CFunctionLayoutCheckOptionalFunctionalModifier = 1
 124 # Check whether the next line contains the function name, left justified, followed by the beginning of the parameter list
 125 # Check whether the closing parenthesis is on its own line and also indented two spaces
 126 CFunctionLayoutCheckFunctionName = 1
 127 # Check whether the function prototypes in include files have the same form as function definitions
 128 CFunctionLayoutCheckFunctionPrototype = 1
 129 # Check whether the body of a function is contained by open and close braces that must be in the first column
 130 CFunctionLayoutCheckFunctionBody = 1
 131 # Check whether the data declarations is the first code in a module.
 132 CFunctionLayoutCheckDataDeclaration = 1
 133 # Check whether no initialization of a variable as part of its declaration
 134 CFunctionLayoutCheckNoInitOfVariable = 1
 135 # Check whether no use of STATIC for functions
 136 CFunctionLayoutCheckNoStatic = 1
 137 # Check whether no use of Deprecated functions
 138 CFunctionLayoutCheckNoDeprecated  = 1
 139
 140 #
 141 # Include Files Checking
 142 #
 143 IncludeFileCheckAll = 0
 144
 145 #Check whether having include files with same name
 146 IncludeFileCheckSameName = 1
 147 # Check whether all include file contents is guarded by a #ifndef statement.
 148 # the #ifndef must be the first line of code following the file header comment
 149 # the #endif must appear on the last line in the file
 150 IncludeFileCheckIfndefStatement = 1
 151 # Check whether include files contain only public or only private data
 152 # Check whether include files NOT contain code or define data variables
 153 IncludeFileCheckData = 1
 154
 155 #
 156 # Declarations and Data Types Checking
 157 #
 158 DeclarationDataTypeCheckAll = 0
 159
 160 # Check whether no use of int, unsigned, char, void, static, long in any .c, .h or .asl files.
 161 DeclarationDataTypeCheckNoUseCType = 1
 162 # Check whether the modifiers IN, OUT, OPTIONAL, and UNALIGNED are used only to qualify arguments to a function and should not appear in a data type declaration
 163 DeclarationDataTypeCheckInOutModifier = 1
 164 # Check whether the EFIAPI modifier should be used at the entry of drivers, events, and member functions of protocols
 165 DeclarationDataTypeCheckEFIAPIModifier = 1
 166 # Check whether Enumerated Type has a 'typedef' and the name is capital
 167 DeclarationDataTypeCheckEnumeratedType = 1
 168 # Check whether Structure Type has a 'typedef' and the name is capital
 169 DeclarationDataTypeCheckStructureDeclaration = 1
 170 # Check whether having same Structure
 171 DeclarationDataTypeCheckSameStructure = 1
 172 # Check whether Union Type has a 'typedef' and the name is capital
 173 DeclarationDataTypeCheckUnionType = 1
 174
 175
 176 #
 177 # Naming Conventions Checking
 178 #
 179 NamingConventionCheckAll = 0
 180
 181 # Check whether only capital letters are used for #define declarations
 182 NamingConventionCheckDefineStatement = 1
 183 # Check whether only capital letters are used for typedef declarations
 184 NamingConventionCheckTypedefStatement = 1
 185 # Check whether the #ifndef at the start of an include file uses both prefix and postfix underscore characters, '_'.
 186 NamingConventionCheckIfndefStatement = 1
 187 # Rule for path name, variable name and function name
 188 # 1. First character should be upper case
 189 # 2. Existing lower case in a word
 190 # 3. No space existence
 191 # 4. Global variable name must start by a 'g'
 192 # Check whether the path name followed the rule
 193 NamingConventionCheckPathName = 1
 194 # Check whether the variable name followed the rule
 195 NamingConventionCheckVariableName = 1
 196 # Check whether the function name followed the rule
 197 NamingConventionCheckFunctionName = 1
 198 # Check whether NO use short variable name with single character
 199 NamingConventionCheckSingleCharacterVariable = 1
 200
 201 #
 202 # Doxygen Checking
 203 #
 204 DoxygenCheckAll = 0
 205
 206 # Check whether the file headers are followed Doxygen special documentation blocks in section 2.3.5
 207 DoxygenCheckFileHeader = 1
 208 # Check whether the function headers are followed Doxygen special documentation blocks in section 2.3.5
 209 DoxygenCheckFunctionHeader = 1
 210 # Check whether the first line of text in a comment block is a brief description of the element being documented.
 211 # The brief description must end with a period.
 212 DoxygenCheckCommentDescription = 1
 213 # Check whether comment lines with '///< ... text ...' format, if it is used, it should be after the code section.
 214 DoxygenCheckCommentFormat = 1
 215 # Check whether only Doxygen commands allowed to mark the code are @bug and @todo.
 216 DoxygenCheckCommand = 1
 217
 218 #
 219 # Meta-Data File Processing Checking
 220 #
 221 MetaDataFileCheckAll = 0
 222
 223 # Check whether each file defined in meta-data exists
 224 MetaDataFileCheckPathName = 1
 225 # Generate a list for all files defined in meta-data files
 226 MetaDataFileCheckGenerateFileList = 1
 227 # The path of log file
 228 MetaDataFileCheckPathOfGenerateFileList = File.log
 229 # Check whether all Library Instances defined for a given module (or dependent library instance) match the module's type.
 230 # Each Library Instance must specify the Supported Module Types in its INF file,
 231 # and any module specifying the library instance must be one of the supported types.
 232 MetaDataFileCheckLibraryInstance = 1
 233 # Check whether a Library Instance has been defined for all dependent library classes
 234 MetaDataFileCheckLibraryInstanceDependent = 1
 235 # Check whether the Library Instances specified by the LibraryClasses sections are listed in order of dependencies
 236 MetaDataFileCheckLibraryInstanceOrder = 1
 237 # Check whether the unnecessary inclusion of library classes in the INF file
 238 MetaDataFileCheckLibraryNoUse = 1
 239 # Check the header file in Include\Library directory whether be defined in the package DEC file.
 240 MetaDataFileCheckLibraryDefinedInDec = 1
 241 # Check whether an INF file is specified in the FDF file, but not in the DSC file, then the INF file must be for a Binary module only
 242 MetaDataFileCheckBinaryInfInFdf = 1
 243 # Not to report error and warning related OS include file such as "windows.h" and "stdio.h".
 244 # Check whether a PCD is set in a DSC file or the FDF file, but not in both.
 245 MetaDataFileCheckPcdDuplicate = 1
 246 # Check whether PCD settings in the FDF file can only be related to flash.
 247 MetaDataFileCheckPcdFlash = 1
 248 # Check whether PCDs used in INF files but not specified in DSC or FDF files
 249 MetaDataFileCheckPcdNoUse = 0
 250 # Check whether having duplicate guids defined for Guid/Protocol/Ppi
 251 MetaDataFileCheckGuidDuplicate = 1
 252 # Check whether all files under module directory are described in INF files
 253 MetaDataFileCheckModuleFileNoUse = 1
 254 # Check whether the PCD is correctly used in C function via its type
 255 MetaDataFileCheckPcdType = 1
 256 # Check whether there are FILE_GUID duplication among different INF files
 257 MetaDataFileCheckModuleFileGuidDuplication = 1
 258
 259 #
 260 # Uni File Processing Checking
 261 #
 262 UniCheckAll = 0
 263 # Check INF or DEC file whether defined the localized information in the associated UNI file.
 264 UniCheckHelpInfo = 1
 265 # Check PCD whether defined the prompt, help in the DEC file and localized information in the associated UNI file.
 266 UniCheckPCDInfo = 1
 267 # Uncheck whether UNI file is in UTF-16 format
 268 GeneralCheckUni = -1
 269
 270 #
 271 # SMM Communicate Function Parameter Checking
 272 #
 273 SmmCommParaCheckAll = 0
 274 # Check if the EFI_SMM_COMMUNICATION_PROTOCOL parameter buffer type is Reserved / ACPI NVS or UEFI RT code/data
 275 SmmCommParaCheckBufferType = 1
 276
 277 #
 278 # The check points in this section are reserved
 279 #
 280 # GotoStatementCheckAll = 0
 281 # SpellingCheckAll = 0
 282 #
 283
 284 # A list for binary file ext name
 285 BinaryExtList = EXE, EFI, FV, ROM, DLL, COM, BMP, GIF, PYD, CMP, BIN, JPG, UNI, RAW, COM2, LIB, DEPEX, SYS, DB
 286 # A list for only scanning dirs, the dirs should be the top folder(s) under workspace
 287 ScanOnlyDirList = ScanFolder1 ScanFolder2