BeagleBoardPkg/BeagleBoardPkg.fdf

   1 # FLASH layout file for Beagle board.
   2 #
   3 # Copyright (c) 2009, Apple Inc. All rights reserved.<BR>
   4 #
   5 #    This program and the accompanying materials
   6 #    are licensed and made available under the terms and conditions of the BSD License
   7 #    which accompanies this distribution. The full text of the license may be found at
   8 #    http://opensource.org/licenses/bsd-license.php
   9 #
  10 #    THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
  11 #    WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
  12 #
  13
  14 ################################################################################
  15 #
  16 # FD Section
  17 # The [FD] Section is made up of the definition statements and a
  18 # description of what goes into  the Flash Device Image.  Each FD section
  19 # defines one flash "device" image.  A flash device image may be one of
  20 # the following: Removable media bootable image (like a boot floppy
  21 # image,) an Option ROM image (that would be "flashed" into an add-in
  22 # card,) a System "Flash"  image (that would be burned into a system's
  23 # flash) or an Update ("Capsule") image that will be used to update and
  24 # existing system flash.
  25 #
  26 ################################################################################
  27
  28
  29 [FD.BeagleBoard_EFI]
  30 ####BaseAddress   = 0x80208000|gEmbeddedTokenSpaceGuid.PcdEmbeddedFdBaseAddress  #The base address of the FLASH Device.
  31 BaseAddress   = 0x80008000|gEmbeddedTokenSpaceGuid.PcdEmbeddedFdBaseAddress  #The base address of the FLASH Device.
  32 Size          = 0x00080000|gEmbeddedTokenSpaceGuid.PcdEmbeddedFdSize         #The size in bytes of the FLASH Device
  33 ErasePolarity = 1
  34 BlockSize     = 0x1
  35 NumBlocks     = 0x80000
  36
  37 ################################################################################
  38 #
  39 # Following are lists of FD Region layout which correspond to the locations of different
  40 # images within the flash device.
  41 #
  42 # Regions must be defined in ascending order and may not overlap.
  43 #
  44 # A Layout Region start with a eight digit hex offset (leading "0x" required) followed by
  45 # the pipe "|" character, followed by the size of the region, also in hex with the leading
  46 # "0x" characters. Like:
  47 # Offset|Size
  48 # PcdOffsetCName|PcdSizeCName
  49 # RegionType <FV, DATA, or FILE>
  50 #
  51 ################################################################################
  52 !if $(EDK2_SECOND_STAGE_BOOTOLADER) == 1
  53 0x00000000|0x00080000
  54 !else
  55 # 512 bytes of configuration header & 8 bytes of image header
  56 0x00000000|0x00000208
  57
  58 0x00000208|0x0007FDF8
  59 !endif
  60 gEmbeddedTokenSpaceGuid.PcdFlashFvMainBase|gEmbeddedTokenSpaceGuid.PcdFlashFvMainSize
  61 FV = FVMAIN_COMPACT
  62
  63 ################################################################################
  64 #
  65 # FV Section
  66 #
  67 # [FV] section is used to define what components or modules are placed within a flash
  68 # device file.  This section also defines order the components and modules are positioned
  69 # within the image.  The [FV] section consists of define statements, set statements and
  70 # module statements.
  71 #
  72 ################################################################################
  73
  74 [FV.FvMain]
  75 BlockSize          = 0x1
  76 NumBlocks          = 0         # This FV gets compressed so make it just big enough
  77 FvAlignment        = 8         # FV alignment and FV attributes setting.
  78 ERASE_POLARITY     = 1
  79 MEMORY_MAPPED      = TRUE
  80 STICKY_WRITE       = TRUE
  81 LOCK_CAP           = TRUE
  82 LOCK_STATUS        = TRUE
  83 WRITE_DISABLED_CAP = TRUE
  84 WRITE_ENABLED_CAP  = TRUE
  85 WRITE_STATUS       = TRUE
  86 WRITE_LOCK_CAP     = TRUE
  87 WRITE_LOCK_STATUS  = TRUE
  88 READ_DISABLED_CAP  = TRUE
  89 READ_ENABLED_CAP   = TRUE
  90 READ_STATUS        = TRUE
  91 READ_LOCK_CAP      = TRUE
  92 READ_LOCK_STATUS   = TRUE
  93
  94   INF MdeModulePkg/Core/Dxe/DxeMain.inf
  95
  96   #
  97   # PI DXE Drivers producing Architectural Protocols (EFI Services)
  98   #
  99   INF ArmPkg/Drivers/CpuDxe/CpuDxe.inf
 100
 101   INF MdeModulePkg/Core/RuntimeDxe/RuntimeDxe.inf
 102   INF MdeModulePkg/Universal/SecurityStubDxe/SecurityStubDxe.inf
 103   INF MdeModulePkg/Universal/WatchdogTimerDxe/WatchdogTimer.inf
 104   INF MdeModulePkg/Universal/CapsuleRuntimeDxe/CapsuleRuntimeDxe.inf
 105   INF MdeModulePkg/Universal/Variable/EmuRuntimeDxe/EmuVariableRuntimeDxe.inf
 106   INF EmbeddedPkg/EmbeddedMonotonicCounter/EmbeddedMonotonicCounter.inf
 107
 108   INF EmbeddedPkg/SimpleTextInOutSerial/SimpleTextInOutSerial.inf
 109
 110   INF EmbeddedPkg/ResetRuntimeDxe/ResetRuntimeDxe.inf
 111   INF EmbeddedPkg/RealTimeClockRuntimeDxe/RealTimeClockRuntimeDxe.inf
 112   INF EmbeddedPkg/MetronomeDxe/MetronomeDxe.inf
 113
 114   #
 115   # Semi-hosting filesystem
 116   #
 117   INF ArmPkg/Filesystem/SemihostFs/SemihostFs.inf
 118
 119   #
 120   # Nand Flash
 121   #
 122   INF Omap35xxPkg/Flash/Flash.inf
 123
 124   #
 125   # MMC/SD
 126   #
 127   INF Omap35xxPkg/MMCHSDxe/MMCHS.inf
 128
 129   #
 130   # I2C
 131   #
 132   INF Omap35xxPkg/SmbusDxe/Smbus.inf
 133
 134   #
 135   # SoC Drivers
 136   #
 137   INF Omap35xxPkg/Gpio/Gpio.inf
 138   INF Omap35xxPkg/InterruptDxe/InterruptDxe.inf
 139   INF Omap35xxPkg/TimerDxe/TimerDxe.inf
 140
 141   #
 142   # Power IC
 143   #
 144   INF Omap35xxPkg/TPS65950Dxe/TPS65950.inf
 145
 146   #
 147   # FAT filesystem + GPT/MBR partitioning
 148   #
 149   INF MdeModulePkg/Universal/Disk/DiskIoDxe/DiskIoDxe.inf
 150   INF MdeModulePkg/Universal/Disk/PartitionDxe/PartitionDxe.inf
 151   INF FatPkg/EnhancedFatDxe/Fat.inf
 152   INF MdeModulePkg/Universal/Disk/UnicodeCollation/EnglishDxe/EnglishDxe.inf
 153
 154   #
 155   # USB Support
 156   #
 157
 158   INF Omap35xxPkg/PciEmulation/PciEmulation.inf
 159
 160   #NOTE: Open source EHCI stack doesn't work on Beagleboard.
 161   #NOTE: UsbBus and UsbMassStorage don't work using iPhond SDK tool chain.
 162   INF MdeModulePkg/Bus/Pci/EhciDxe/EhciDxe.inf
 163   INF MdeModulePkg/Bus/Usb/UsbBusDxe/UsbBusDxe.inf
 164   INF MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassStorageDxe.inf
 165
 166   #
 167   # UEFI application (Shell Embedded Boot Loader)
 168   #
 169   INF EmbeddedPkg/Ebl/Ebl.inf
 170
 171   #
 172   # Bds
 173   #
 174   INF MdeModulePkg/Universal/DevicePathDxe/DevicePathDxe.inf
 175   INF MdeModulePkg/Universal/HiiDatabaseDxe/HiiDatabaseDxe.inf
 176   INF ArmPlatformPkg/Bds/Bds.inf
 177
 178
 179
 180 [FV.FVMAIN_COMPACT]
 181 FvAlignment        = 8
 182 ERASE_POLARITY     = 1
 183 MEMORY_MAPPED      = TRUE
 184 STICKY_WRITE       = TRUE
 185 LOCK_CAP           = TRUE
 186 LOCK_STATUS        = TRUE
 187 WRITE_DISABLED_CAP = TRUE
 188 WRITE_ENABLED_CAP  = TRUE
 189 WRITE_STATUS       = TRUE
 190 WRITE_LOCK_CAP     = TRUE
 191 WRITE_LOCK_STATUS  = TRUE
 192 READ_DISABLED_CAP  = TRUE
 193 READ_ENABLED_CAP   = TRUE
 194 READ_STATUS        = TRUE
 195 READ_LOCK_CAP      = TRUE
 196 READ_LOCK_STATUS   = TRUE
 197
 198   INF BeagleBoardPkg/Sec/Sec.inf
 199
 200   FILE FV_IMAGE = 9E21FD93-9C72-4c15-8C4B-E77F1DB2D792 {
 201     SECTION GUIDED EE4E5898-3914-4259-9D6E-DC7BD79403CF PROCESSING_REQUIRED = TRUE {
 202       SECTION FV_IMAGE = FVMAIN
 203     }
 204   }
 205
 206
 207 ################################################################################
 208 #
 209 # Rules are use with the [FV] section's module INF type to define
 210 # how an FFS file is created for a given INF file. The following Rule are the default
 211 # rules for the different module type. User can add the customized rules to define the
 212 # content of the FFS file.
 213 #
 214 ################################################################################
 215
 216
 217 ############################################################################
 218 # Example of a DXE_DRIVER FFS file with a Checksum encapsulation section   #
 219 ############################################################################
 220 #
 221 #[Rule.Common.DXE_DRIVER]
 222 #  FILE DRIVER = $(NAMED_GUID) {
 223 #    DXE_DEPEX    DXE_DEPEX Optional      |.depex
 224 #    COMPRESS PI_STD {
 225 #      GUIDED {
 226 #        PE32     PE32                    |.efi
 227 #        UI       STRING="$(MODULE_NAME)" Optional
 228 #        VERSION  STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
 229 #      }
 230 #    }
 231 #  }
 232 #
 233 ############################################################################
 234
 235 [Rule.Common.SEC]
 236   FILE SEC = $(NAMED_GUID) RELOCS_STRIPPED {
 237     TE  TE    Align = 8      |.efi
 238   }
 239
 240 [Rule.Common.PEI_CORE]
 241   FILE PEI_CORE = $(NAMED_GUID) {
 242     TE     TE           |.efi
 243     UI     STRING ="$(MODULE_NAME)" Optional
 244   }
 245
 246 [Rule.Common.PEIM]
 247   FILE PEIM = $(NAMED_GUID) {
 248      PEI_DEPEX PEI_DEPEX Optional        |.depex
 249      PE32      PE32                      |.efi
 250      UI       STRING="$(MODULE_NAME)" Optional
 251   }
 252
 253 [Rule.Common.PEIM.TIANOCOMPRESSED]
 254   FILE PEIM = $(NAMED_GUID) DEBUG_MYTOOLS_IA32 {
 255     PEI_DEPEX PEI_DEPEX Optional         |.depex
 256     GUIDED A31280AD-481E-41B6-95E8-127F4C984779 PROCESSING_REQUIRED = TRUE {
 257       PE32      PE32                     |.efi
 258       UI        STRING="$(MODULE_NAME)" Optional
 259     }
 260   }
 261
 262 [Rule.Common.DXE_CORE]
 263   FILE DXE_CORE = $(NAMED_GUID) {
 264     PE32     PE32           |.efi
 265     UI       STRING="$(MODULE_NAME)" Optional
 266   }
 267
 268
 269 [Rule.Common.UEFI_DRIVER]
 270   FILE DRIVER = $(NAMED_GUID) {
 271     DXE_DEPEX    DXE_DEPEX Optional      |.depex
 272     PE32         PE32                    |.efi
 273     UI           STRING="$(MODULE_NAME)" Optional
 274   }
 275
 276 [Rule.Common.DXE_DRIVER]
 277   FILE DRIVER = $(NAMED_GUID) {
 278     DXE_DEPEX    DXE_DEPEX Optional      |.depex
 279     PE32         PE32                    |.efi
 280     UI           STRING="$(MODULE_NAME)" Optional
 281   }
 282
 283 [Rule.Common.DXE_RUNTIME_DRIVER]
 284   FILE DRIVER = $(NAMED_GUID) {
 285     DXE_DEPEX    DXE_DEPEX Optional      |.depex
 286     PE32         PE32                    |.efi
 287     UI           STRING="$(MODULE_NAME)" Optional
 288   }
 289
 290
 291 [Rule.Common.UEFI_APPLICATION]
 292   FILE APPLICATION = $(NAMED_GUID) {
 293     UI     STRING ="$(MODULE_NAME)" Optional
 294     PE32   PE32                    |.efi
 295   }