BeagleBoardPkg/BeagleBoardPkg.fdf

   1 # FLASH layout file for Beagle board.
   2 #
   3 # Copyright (c) 2009, Apple Inc. All rights reserved.<BR>
   4 #
   5 #    This program and the accompanying materials
   6 #    are licensed and made available under the terms and conditions of the BSD License
   7 #    which accompanies this distribution. The full text of the license may be found at
   8 #    http://opensource.org/licenses/bsd-license.php
   9 #
  10 #    THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
  11 #    WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
  12 #
  13
  14 ################################################################################
  15 #
  16 # FD Section
  17 # The [FD] Section is made up of the definition statements and a
  18 # description of what goes into  the Flash Device Image.  Each FD section
  19 # defines one flash "device" image.  A flash device image may be one of
  20 # the following: Removable media bootable image (like a boot floppy
  21 # image,) an Option ROM image (that would be "flashed" into an add-in
  22 # card,) a System "Flash"  image (that would be burned into a system's
  23 # flash) or an Update ("Capsule") image that will be used to update and
  24 # existing system flash.
  25 #
  26 ################################################################################
  27
  28
  29 [FD.BeagleBoard_EFI]
  30 BaseAddress   = 0x80007DF8|gArmTokenSpaceGuid.PcdFdBaseAddress  #The base address of the FLASH Device.
  31 Size          = 0x000B0000|gArmTokenSpaceGuid.PcdFdSize         #The size in bytes of the FLASH Device
  32 ErasePolarity = 1
  33 BlockSize     = 0x1
  34 NumBlocks     = 0xB0000
  35
  36 ################################################################################
  37 #
  38 # Following are lists of FD Region layout which correspond to the locations of different
  39 # images within the flash device.
  40 #
  41 # Regions must be defined in ascending order and may not overlap.
  42 #
  43 # A Layout Region start with a eight digit hex offset (leading "0x" required) followed by
  44 # the pipe "|" character, followed by the size of the region, also in hex with the leading
  45 # "0x" characters. Like:
  46 # Offset|Size
  47 # PcdOffsetCName|PcdSizeCName
  48 # RegionType <FV, DATA, or FILE>
  49 #
  50 ################################################################################
  51 0x00000000|0x00000200
  52 FILE = BeagleBoardPkg/ConfigurationHeader.bin
  53
  54 0x00000200|0x00000008
  55 DATA = {
  56   0xF8, 0xFD, 0x0A, 0x00,   # image size:   0xB0000 - 0x208 == 0xAFDF8
  57   0x00, 0x80, 0x00, 0x80    # entry point:  0x80008000
  58 }
  59
  60 0x00000208|0x000AFDF8
  61 gArmTokenSpaceGuid.PcdFvBaseAddress|gArmTokenSpaceGuid.PcdFvSize
  62 FV = FVMAIN_COMPACT
  63
  64 ################################################################################
  65 #
  66 # FV Section
  67 #
  68 # [FV] section is used to define what components or modules are placed within a flash
  69 # device file.  This section also defines order the components and modules are positioned
  70 # within the image.  The [FV] section consists of define statements, set statements and
  71 # module statements.
  72 #
  73 ################################################################################
  74
  75 [FV.FvMain]
  76 BlockSize          = 0x1
  77 NumBlocks          = 0         # This FV gets compressed so make it just big enough
  78 FvAlignment        = 8         # FV alignment and FV attributes setting.
  79 ERASE_POLARITY     = 1
  80 MEMORY_MAPPED      = TRUE
  81 STICKY_WRITE       = TRUE
  82 LOCK_CAP           = TRUE
  83 LOCK_STATUS        = TRUE
  84 WRITE_DISABLED_CAP = TRUE
  85 WRITE_ENABLED_CAP  = TRUE
  86 WRITE_STATUS       = TRUE
  87 WRITE_LOCK_CAP     = TRUE
  88 WRITE_LOCK_STATUS  = TRUE
  89 READ_DISABLED_CAP  = TRUE
  90 READ_ENABLED_CAP   = TRUE
  91 READ_STATUS        = TRUE
  92 READ_LOCK_CAP      = TRUE
  93 READ_LOCK_STATUS   = TRUE
  94 FvNameGuid         = d0dd3e90-343d-4cb3-8f69-772214989282
  95
  96   INF MdeModulePkg/Core/Dxe/DxeMain.inf
  97
  98   #
  99   # PI DXE Drivers producing Architectural Protocols (EFI Services)
 100   #
 101   INF ArmPkg/Drivers/CpuDxe/CpuDxe.inf
 102
 103   INF MdeModulePkg/Core/RuntimeDxe/RuntimeDxe.inf
 104   INF MdeModulePkg/Universal/SecurityStubDxe/SecurityStubDxe.inf
 105   INF MdeModulePkg/Universal/WatchdogTimerDxe/WatchdogTimer.inf
 106   INF MdeModulePkg/Universal/CapsuleRuntimeDxe/CapsuleRuntimeDxe.inf
 107   INF MdeModulePkg/Universal/Variable/EmuRuntimeDxe/EmuVariableRuntimeDxe.inf
 108   INF EmbeddedPkg/EmbeddedMonotonicCounter/EmbeddedMonotonicCounter.inf
 109
 110   INF MdeModulePkg/Universal/Console/ConPlatformDxe/ConPlatformDxe.inf
 111   INF MdeModulePkg/Universal/Console/ConSplitterDxe/ConSplitterDxe.inf
 112   INF MdeModulePkg/Universal/Console/GraphicsConsoleDxe/GraphicsConsoleDxe.inf
 113   INF EmbeddedPkg/SerialDxe/SerialDxe.inf
 114   INF MdeModulePkg/Universal/Console/TerminalDxe/TerminalDxe.inf
 115
 116   INF EmbeddedPkg/ResetRuntimeDxe/ResetRuntimeDxe.inf
 117   INF EmbeddedPkg/RealTimeClockRuntimeDxe/RealTimeClockRuntimeDxe.inf
 118   INF EmbeddedPkg/MetronomeDxe/MetronomeDxe.inf
 119
 120 !if $(TARGET) == RELEASE
 121   #
 122   # Semi-hosting filesystem
 123   #
 124   INF ArmPkg/Filesystem/SemihostFs/SemihostFs.inf
 125 !endif
 126
 127   #
 128   # Nand Flash
 129   #
 130   INF Omap35xxPkg/Flash/Flash.inf
 131
 132   #
 133   # MMC/SD
 134   #
 135   INF EmbeddedPkg/Universal/MmcDxe/MmcDxe.inf
 136   INF Omap35xxPkg/MmcHostDxe/MmcHostDxe.inf
 137
 138   #
 139   # I2C
 140   #
 141   INF Omap35xxPkg/SmbusDxe/Smbus.inf
 142
 143   #
 144   # SoC Drivers
 145   #
 146   INF Omap35xxPkg/Gpio/Gpio.inf
 147   INF Omap35xxPkg/InterruptDxe/InterruptDxe.inf
 148   INF Omap35xxPkg/TimerDxe/TimerDxe.inf
 149   INF Omap35xxPkg/LcdGraphicsOutputDxe/LcdGraphicsOutputDxe.inf
 150
 151   #
 152   # Power IC
 153   #
 154   INF Omap35xxPkg/TPS65950Dxe/TPS65950.inf
 155
 156   #
 157   # FAT filesystem + GPT/MBR partitioning
 158   #
 159   INF MdeModulePkg/Universal/Disk/DiskIoDxe/DiskIoDxe.inf
 160   INF MdeModulePkg/Universal/Disk/PartitionDxe/PartitionDxe.inf
 161   INF FatBinPkg/EnhancedFatDxe/Fat.inf
 162   INF MdeModulePkg/Universal/Disk/UnicodeCollation/EnglishDxe/EnglishDxe.inf
 163
 164   #
 165   # USB Support
 166   #
 167
 168   INF Omap35xxPkg/PciEmulation/PciEmulation.inf
 169
 170   INF MdeModulePkg/Bus/Pci/EhciDxe/EhciDxe.inf
 171   INF MdeModulePkg/Bus/Usb/UsbBusDxe/UsbBusDxe.inf
 172   INF MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassStorageDxe.inf
 173
 174   #
 175   # UEFI application (Shell Embedded Boot Loader)
 176   #
 177   INF ShellBinPkg/UefiShell/UefiShell.inf
 178
 179   #
 180   # Bds
 181   #
 182   INF MdeModulePkg/Universal/DevicePathDxe/DevicePathDxe.inf
 183   INF MdeModulePkg/Universal/HiiDatabaseDxe/HiiDatabaseDxe.inf
 184   INF ArmPlatformPkg/Bds/Bds.inf
 185
 186   # Legacy Linux Loader
 187   INF ArmPkg/Application/LinuxLoader/LinuxLoader.inf
 188
 189
 190 [FV.FVMAIN_COMPACT]
 191 FvAlignment        = 8
 192 ERASE_POLARITY     = 1
 193 MEMORY_MAPPED      = TRUE
 194 STICKY_WRITE       = TRUE
 195 LOCK_CAP           = TRUE
 196 LOCK_STATUS        = TRUE
 197 WRITE_DISABLED_CAP = TRUE
 198 WRITE_ENABLED_CAP  = TRUE
 199 WRITE_STATUS       = TRUE
 200 WRITE_LOCK_CAP     = TRUE
 201 WRITE_LOCK_STATUS  = TRUE
 202 READ_DISABLED_CAP  = TRUE
 203 READ_ENABLED_CAP   = TRUE
 204 READ_STATUS        = TRUE
 205 READ_LOCK_CAP      = TRUE
 206 READ_LOCK_STATUS   = TRUE
 207
 208   INF ArmPlatformPkg/PrePi/PeiUniCore.inf
 209
 210   FILE FV_IMAGE = 9E21FD93-9C72-4c15-8C4B-E77F1DB2D792 {
 211     SECTION GUIDED EE4E5898-3914-4259-9D6E-DC7BD79403CF PROCESSING_REQUIRED = TRUE {
 212       SECTION FV_IMAGE = FVMAIN
 213     }
 214   }
 215
 216
 217 ################################################################################
 218 #
 219 # Rules are use with the [FV] section's module INF type to define
 220 # how an FFS file is created for a given INF file. The following Rule are the default
 221 # rules for the different module type. User can add the customized rules to define the
 222 # content of the FFS file.
 223 #
 224 ################################################################################
 225
 226
 227 ############################################################################
 228 # Example of a DXE_DRIVER FFS file with a Checksum encapsulation section   #
 229 ############################################################################
 230 #
 231 #[Rule.Common.DXE_DRIVER]
 232 #  FILE DRIVER = $(NAMED_GUID) {
 233 #    DXE_DEPEX    DXE_DEPEX               Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
 234 #    COMPRESS PI_STD {
 235 #      GUIDED {
 236 #        PE32     PE32                    $(INF_OUTPUT)/$(MODULE_NAME).efi
 237 #        UI       STRING="$(MODULE_NAME)" Optional
 238 #        VERSION  STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
 239 #      }
 240 #    }
 241 #  }
 242 #
 243 ############################################################################
 244
 245 [Rule.Common.SEC]
 246   FILE SEC = $(NAMED_GUID) RELOCS_STRIPPED {
 247     TE  TE    Align = 32                $(INF_OUTPUT)/$(MODULE_NAME).efi
 248   }
 249
 250 [Rule.Common.PEI_CORE]
 251   FILE PEI_CORE = $(NAMED_GUID) {
 252     TE     TE                           $(INF_OUTPUT)/$(MODULE_NAME).efi
 253     UI     STRING ="$(MODULE_NAME)" Optional
 254   }
 255
 256 [Rule.Common.PEIM]
 257   FILE PEIM = $(NAMED_GUID) {
 258      PEI_DEPEX PEI_DEPEX Optional       $(INF_OUTPUT)/$(MODULE_NAME).depex
 259      PE32      PE32                     $(INF_OUTPUT)/$(MODULE_NAME).efi
 260      UI       STRING="$(MODULE_NAME)" Optional
 261   }
 262
 263 [Rule.Common.PEIM.TIANOCOMPRESSED]
 264   FILE PEIM = $(NAMED_GUID) DEBUG_MYTOOLS_IA32 {
 265     PEI_DEPEX PEI_DEPEX Optional        $(INF_OUTPUT)/$(MODULE_NAME).depex
 266     GUIDED A31280AD-481E-41B6-95E8-127F4C984779 PROCESSING_REQUIRED = TRUE {
 267       PE32      PE32                    $(INF_OUTPUT)/$(MODULE_NAME).efi
 268       UI        STRING="$(MODULE_NAME)" Optional
 269     }
 270   }
 271
 272 [Rule.Common.DXE_CORE]
 273   FILE DXE_CORE = $(NAMED_GUID) {
 274     PE32     PE32                       $(INF_OUTPUT)/$(MODULE_NAME).efi
 275     UI       STRING="$(MODULE_NAME)" Optional
 276   }
 277
 278
 279 [Rule.Common.UEFI_DRIVER]
 280   FILE DRIVER = $(NAMED_GUID) {
 281     DXE_DEPEX    DXE_DEPEX              Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
 282     PE32         PE32                   $(INF_OUTPUT)/$(MODULE_NAME).efi
 283     UI           STRING="$(MODULE_NAME)" Optional
 284   }
 285
 286 [Rule.Common.DXE_DRIVER]
 287   FILE DRIVER = $(NAMED_GUID) {
 288     DXE_DEPEX    DXE_DEPEX              Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
 289     PE32         PE32                   $(INF_OUTPUT)/$(MODULE_NAME).efi
 290     UI           STRING="$(MODULE_NAME)" Optional
 291   }
 292
 293 [Rule.Common.DXE_RUNTIME_DRIVER]
 294   FILE DRIVER = $(NAMED_GUID) {
 295     DXE_DEPEX    DXE_DEPEX              Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
 296     PE32         PE32                   $(INF_OUTPUT)/$(MODULE_NAME).efi
 297     UI           STRING="$(MODULE_NAME)" Optional
 298   }
 299
 300 [Rule.Common.UEFI_APPLICATION]
 301   FILE APPLICATION = $(NAMED_GUID) {
 302     UI     STRING ="$(MODULE_NAME)" Optional
 303     PE32   PE32                         $(INF_OUTPUT)/$(MODULE_NAME).efi
 304   }
 305
 306 [Rule.Common.UEFI_DRIVER.BINARY]
 307   FILE DRIVER = $(NAMED_GUID) {
 308     DXE_DEPEX DXE_DEPEX Optional      |.depex
 309     PE32      PE32                    |.efi
 310     UI        STRING="$(MODULE_NAME)" Optional
 311     VERSION   STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
 312   }
 313
 314 [Rule.Common.UEFI_APPLICATION.BINARY]
 315   FILE APPLICATION = $(NAMED_GUID) {
 316     PE32      PE32                    |.efi
 317     UI        STRING="$(MODULE_NAME)" Optional
 318     VERSION   STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
 319   }