]> git.proxmox.com Git - mirror_edk2.git/blob - IntelFsp2Pkg/FspSecCore/SecMain.h
f6333b0ffb0f5ff87d7c18dc49cbcdda139fd1a4
[mirror_edk2.git] / IntelFsp2Pkg / FspSecCore / SecMain.h
1 /** @file
2
3 Copyright (c) 2014 - 2019, Intel Corporation. All rights reserved.<BR>
4 SPDX-License-Identifier: BSD-2-Clause-Patent
5
6 **/
7
8 #ifndef _SEC_CORE_H_
9 #define _SEC_CORE_H_
10
11
12 #include <PiPei.h>
13 #include <Ppi/TemporaryRamSupport.h>
14
15 #include <Library/BaseLib.h>
16 #include <Library/IoLib.h>
17 #include <Library/DebugLib.h>
18 #include <Library/PcdLib.h>
19 #include <Library/BaseMemoryLib.h>
20 #include <Library/PciCf8Lib.h>
21 #include <Library/SerialPortLib.h>
22 #include <Library/FspSwitchStackLib.h>
23 #include <Library/FspCommonLib.h>
24 #include <Library/UefiCpuLib.h>
25 #include <FspEas.h>
26
27 typedef VOID (*PEI_CORE_ENTRY) ( \
28 IN CONST EFI_SEC_PEI_HAND_OFF *SecCoreData, \
29 IN CONST EFI_PEI_PPI_DESCRIPTOR *PpiList \
30 );
31
32 typedef struct _SEC_IDT_TABLE {
33 //
34 // Reserved 8 bytes preceding IDT to store EFI_PEI_SERVICES**, since IDT base
35 // address should be 8-byte alignment.
36 // Note: For IA32, only the 4 bytes immediately preceding IDT is used to store
37 // EFI_PEI_SERVICES**
38 //
39 UINT64 PeiService;
40 UINT64 IdtTable[FixedPcdGet8 (PcdFspMaxInterruptSupported)];
41 } SEC_IDT_TABLE;
42
43 /**
44 Switch the stack in the temporary memory to the one in the permanent memory.
45
46 This function must be invoked after the memory migration immediately. The relative
47 position of the stack in the temporary and permanent memory is same.
48
49 @param[in] TemporaryMemoryBase Base address of the temporary memory.
50 @param[in] PermenentMemoryBase Base address of the permanent memory.
51 **/
52 VOID
53 EFIAPI
54 SecSwitchStack (
55 IN UINT32 TemporaryMemoryBase,
56 IN UINT32 PermenentMemoryBase
57 );
58
59 /**
60 This service of the TEMPORARY_RAM_SUPPORT_PPI that migrates temporary RAM into
61 permanent memory.
62
63 @param[in] PeiServices Pointer to the PEI Services Table.
64 @param[in] TemporaryMemoryBase Source Address in temporary memory from which the SEC or PEIM will copy the
65 Temporary RAM contents.
66 @param[in] PermanentMemoryBase Destination Address in permanent memory into which the SEC or PEIM will copy the
67 Temporary RAM contents.
68 @param[in] CopySize Amount of memory to migrate from temporary to permanent memory.
69
70 @retval EFI_SUCCESS The data was successfully returned.
71 @retval EFI_INVALID_PARAMETER PermanentMemoryBase + CopySize > TemporaryMemoryBase when
72 TemporaryMemoryBase > PermanentMemoryBase.
73
74 **/
75 EFI_STATUS
76 EFIAPI
77 SecTemporaryRamSupport (
78 IN CONST EFI_PEI_SERVICES **PeiServices,
79 IN EFI_PHYSICAL_ADDRESS TemporaryMemoryBase,
80 IN EFI_PHYSICAL_ADDRESS PermanentMemoryBase,
81 IN UINTN CopySize
82 );
83
84
85 /**
86
87 Entry point to the C language phase of SEC. After the SEC assembly
88 code has initialized some temporary memory and set up the stack,
89 the control is transferred to this function.
90
91
92 @param[in] SizeOfRam Size of the temporary memory available for use.
93 @param[in] TempRamBase Base address of temporary ram
94 @param[in] BootFirmwareVolume Base address of the Boot Firmware Volume.
95 @param[in] PeiCore PeiCore entry point.
96 @param[in] BootLoaderStack BootLoader stack.
97 @param[in] ApiIdx the index of API.
98
99 @return This function never returns.
100
101 **/
102 VOID
103 EFIAPI
104 SecStartup (
105 IN UINT32 SizeOfRam,
106 IN UINT32 TempRamBase,
107 IN VOID *BootFirmwareVolume,
108 IN PEI_CORE_ENTRY PeiCore,
109 IN UINT32 BootLoaderStack,
110 IN UINT32 ApiIdx
111 );
112
113 /**
114 Autogenerated function that calls the library constructors for all of the module's
115 dependent libraries. This function must be called by the SEC Core once a stack has
116 been established.
117
118 **/
119 VOID
120 EFIAPI
121 ProcessLibraryConstructorList (
122 VOID
123 );
124
125 /**
126
127 Return value of esp.
128
129 @return value of esp.
130
131 **/
132 UINT32
133 EFIAPI
134 AsmReadEsp (
135 VOID
136 );
137
138 #endif