]> git.proxmox.com Git - mirror_edk2.git/blob - MdeModulePkg/Bus/Pci/UhciDxe/Uhci.h
MdeModulePkg: Clean up source files
[mirror_edk2.git] / MdeModulePkg / Bus / Pci / UhciDxe / Uhci.h
1 /** @file
2
3 The definition for UHCI driver model and HC protocol routines.
4
5 Copyright (c) 2004 - 2018, Intel Corporation. All rights reserved.<BR>
6 This program and the accompanying materials
7 are licensed and made available under the terms and conditions of the BSD License
8 which accompanies this distribution. The full text of the license may be found at
9 http://opensource.org/licenses/bsd-license.php
10
11 THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
12 WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
13
14 **/
15
16 #ifndef _EFI_UHCI_H_
17 #define _EFI_UHCI_H_
18
19
20 #include <Uefi.h>
21
22 #include <Protocol/Usb2HostController.h>
23 #include <Protocol/UsbHostController.h>
24 #include <Protocol/PciIo.h>
25
26 #include <Guid/EventGroup.h>
27
28 #include <Library/DebugLib.h>
29 #include <Library/BaseMemoryLib.h>
30 #include <Library/UefiDriverEntryPoint.h>
31 #include <Library/UefiBootServicesTableLib.h>
32 #include <Library/UefiLib.h>
33 #include <Library/BaseLib.h>
34 #include <Library/MemoryAllocationLib.h>
35 #include <Library/PcdLib.h>
36 #include <Library/ReportStatusCodeLib.h>
37
38 #include <IndustryStandard/Pci.h>
39
40 typedef struct _USB_HC_DEV USB_HC_DEV;
41
42 #include "UsbHcMem.h"
43 #include "UhciQueue.h"
44 #include "UhciReg.h"
45 #include "UhciSched.h"
46 #include "UhciDebug.h"
47 #include "ComponentName.h"
48
49 //
50 // UHC timeout experience values
51 //
52
53 #define UHC_1_MICROSECOND 1
54 #define UHC_1_MILLISECOND (1000 * UHC_1_MICROSECOND)
55 #define UHC_1_SECOND (1000 * UHC_1_MILLISECOND)
56
57 //
58 // UHCI register operation timeout, set by experience
59 //
60 #define UHC_GENERIC_TIMEOUT UHC_1_SECOND
61
62 //
63 // Wait for force global resume(FGR) complete, refers to
64 // specification[UHCI11-2.1.1]
65 //
66 #define UHC_FORCE_GLOBAL_RESUME_STALL (20 * UHC_1_MILLISECOND)
67
68 //
69 // Wait for roothub port reset and recovery, reset stall
70 // is set by experience, and recovery stall refers to
71 // specification[UHCI11-2.1.1]
72 //
73 #define UHC_ROOT_PORT_RESET_STALL (50 * UHC_1_MILLISECOND)
74 #define UHC_ROOT_PORT_RECOVERY_STALL (10 * UHC_1_MILLISECOND)
75
76 //
77 // Sync and Async transfer polling interval, set by experience,
78 // and the unit of Async is 100us.
79 //
80 #define UHC_SYNC_POLL_INTERVAL (1 * UHC_1_MILLISECOND)
81 #define UHC_ASYNC_POLL_INTERVAL EFI_TIMER_PERIOD_MILLISECONDS(1)
82
83 //
84 // UHC raises TPL to TPL_NOTIFY to serialize all its operations
85 // to protect shared data structures.
86 //
87 #define UHCI_TPL TPL_NOTIFY
88
89 #define USB_HC_DEV_SIGNATURE SIGNATURE_32 ('u', 'h', 'c', 'i')
90
91 #pragma pack(1)
92 typedef struct {
93 UINT8 ProgInterface;
94 UINT8 SubClassCode;
95 UINT8 BaseCode;
96 } USB_CLASSC;
97 #pragma pack()
98
99 #define UHC_FROM_USB2_HC_PROTO(This) CR(This, USB_HC_DEV, Usb2Hc, USB_HC_DEV_SIGNATURE)
100
101 //
102 // USB_HC_DEV support the UHCI hardware controller. It schedules
103 // the asynchronous interrupt transfer with the same method as
104 // EHCI: a reversed tree structure. For synchronous interrupt,
105 // control and bulk transfer, it uses three static queue head to
106 // schedule them. SyncIntQh is for interrupt transfer. LsCtrlQh is
107 // for LOW speed control transfer, and FsCtrlBulkQh is for FULL
108 // speed control or bulk transfer. This is because FULL speed contrl
109 // or bulk transfer can reclaim the unused bandwidth. Some USB
110 // device requires this bandwidth reclamation capability.
111 //
112 struct _USB_HC_DEV {
113 UINT32 Signature;
114 EFI_USB2_HC_PROTOCOL Usb2Hc;
115 EFI_PCI_IO_PROTOCOL *PciIo;
116 EFI_DEVICE_PATH_PROTOCOL *DevicePath;
117 UINT64 OriginalPciAttributes;
118
119 //
120 // Schedule data structures
121 //
122 UINT32 *FrameBase; // the buffer pointed by this pointer is used to store pci bus address of the QH descriptor.
123 UINT32 *FrameBaseHostAddr; // the buffer pointed by this pointer is used to store host memory address of the QH descriptor.
124 UHCI_QH_SW *SyncIntQh;
125 UHCI_QH_SW *CtrlQh;
126 UHCI_QH_SW *BulkQh;
127
128 //
129 // Structures to maintain asynchronus interrupt transfers.
130 // When asynchronous interrutp transfer is unlinked from
131 // the frame list, the hardware may still hold a pointer
132 // to it. To synchronize with hardware, its resoureces are
133 // released in two steps using Recycle and RecycleWait.
134 // Check the asynchronous interrupt management routines.
135 //
136 LIST_ENTRY AsyncIntList;
137 EFI_EVENT AsyncIntMonitor;
138 UHCI_ASYNC_REQUEST *Recycle;
139 UHCI_ASYNC_REQUEST *RecycleWait;
140
141
142 UINTN RootPorts;
143 USBHC_MEM_POOL *MemPool;
144 EFI_UNICODE_STRING_TABLE *CtrlNameTable;
145 VOID *FrameMapping;
146
147 //
148 // ExitBootServicesEvent is used to stop the EHC DMA operation
149 // after exit boot service.
150 //
151 EFI_EVENT ExitBootServiceEvent;
152 };
153
154 extern EFI_DRIVER_BINDING_PROTOCOL gUhciDriverBinding;
155 extern EFI_COMPONENT_NAME_PROTOCOL gUhciComponentName;
156 extern EFI_COMPONENT_NAME2_PROTOCOL gUhciComponentName2;
157
158 /**
159 Test to see if this driver supports ControllerHandle. Any
160 ControllerHandle that has UsbHcProtocol installed will be supported.
161
162 @param This Protocol instance pointer.
163 @param Controller Handle of device to test.
164 @param RemainingDevicePath Not used.
165
166 @return EFI_SUCCESS This driver supports this device.
167 @return EFI_UNSUPPORTED This driver does not support this device.
168
169 **/
170 EFI_STATUS
171 EFIAPI
172 UhciDriverBindingSupported (
173 IN EFI_DRIVER_BINDING_PROTOCOL *This,
174 IN EFI_HANDLE Controller,
175 IN EFI_DEVICE_PATH_PROTOCOL *RemainingDevicePath
176 );
177
178 /**
179 Starting the Usb UHCI Driver.
180
181 @param This Protocol instance pointer.
182 @param Controller Handle of device to test.
183 @param RemainingDevicePath Not used.
184
185 @retval EFI_SUCCESS This driver supports this device.
186 @retval EFI_UNSUPPORTED This driver does not support this device.
187 @retval EFI_DEVICE_ERROR This driver cannot be started due to device Error.
188 EFI_OUT_OF_RESOURCES- Failed due to resource shortage.
189
190 **/
191 EFI_STATUS
192 EFIAPI
193 UhciDriverBindingStart (
194 IN EFI_DRIVER_BINDING_PROTOCOL *This,
195 IN EFI_HANDLE Controller,
196 IN EFI_DEVICE_PATH_PROTOCOL *RemainingDevicePath
197 );
198
199 /**
200 Stop this driver on ControllerHandle. Support stopping any child handles
201 created by this driver.
202
203 @param This Protocol instance pointer.
204 @param Controller Handle of device to stop driver on.
205 @param NumberOfChildren Number of Children in the ChildHandleBuffer.
206 @param ChildHandleBuffer List of handles for the children we need to stop.
207
208 @return EFI_SUCCESS
209 @return others
210
211 **/
212 EFI_STATUS
213 EFIAPI
214 UhciDriverBindingStop (
215 IN EFI_DRIVER_BINDING_PROTOCOL *This,
216 IN EFI_HANDLE Controller,
217 IN UINTN NumberOfChildren,
218 IN EFI_HANDLE *ChildHandleBuffer
219 );
220
221 #endif