MdeModulePkg/UsbBusDxe: Add UsbControlTransfer() error check
[mirror_edk2.git] / MdeModulePkg / MdeModulePkg.dec
1 ## @file MdeModulePkg.dec
2 # This package provides the modules that conform to UEFI/PI Industry standards.
3 # It also provides the definitions(including PPIs/PROTOCOLs/GUIDs and library classes)
4 # and libraries instances, which are used for those modules.
5 #
6 # Copyright (c) 2007 - 2017, Intel Corporation. All rights reserved.<BR>
7 # Copyright (c) 2016, Linaro Ltd. All rights reserved.<BR>
8 # (C) Copyright 2016 Hewlett Packard Enterprise Development LP<BR>
9 # Copyright (c) 2017, AMD Incorporated. All rights reserved.<BR>
10 #
11 # This program and the accompanying materials are licensed and made available under
12 # the terms and conditions of the BSD License that accompanies this distribution.
13 # The full text of the license may be found at
14 # http://opensource.org/licenses/bsd-license.php.
15 #
16 # THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
17 # WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
18 #
19 ##
20
21
22 [Defines]
23 DEC_SPECIFICATION = 0x00010005
24 PACKAGE_NAME = MdeModulePkg
25 PACKAGE_UNI_FILE = MdeModulePkg.uni
26 PACKAGE_GUID = BA0D78D6-2CAF-414b-BD4D-B6762A894288
27 PACKAGE_VERSION = 0.97
28
29 [Includes]
30 Include
31
32
33 [LibraryClasses]
34 ## @libraryclass IpIo layer upon EFI IP4 Protocol.
35 # This library is only intended to be used by UEFI network stack modules.
36 IpIoLib|Include/Library/IpIoLib.h
37
38 ## @libraryclass Basic function for UEFI network stack.
39 # This library is only intended to be used by UEFI network stack modules.
40 NetLib|Include/Library/NetLib.h
41
42 ## @libraryclass The helper routines to access UDP service.
43 # This library is only intended to be used by UEFI network stack modules.
44 UdpIoLib|Include/Library/UdpIoLib.h
45
46 ## @libraryclass The helper routines to access TCP service.
47 # This library is only intended to be used by UEFI network stack modules.
48 TcpIoLib|Include/Library/TcpIoLib.h
49
50 ## @libraryclass The helper routines to access HTTP service.
51 # This library is only intended to be used by UEFI network stack modules.
52 HttpLib|Include/Library/HttpLib.h
53
54 ## @libraryclass Defines a set of methods to reset whole system.
55 ResetSystemLib|Include/Library/ResetSystemLib.h
56
57 ## @libraryclass Defines a set of methods related do S3 mode.
58 # This library class is no longer used and modules using this library should
59 # directly locate EFI_PEI_S3_RESUME_PPI defined in PI 1.2 specification.
60 S3Lib|Include/Library/S3Lib.h
61
62 ## @libraryclass Defines a set of methods related recovery mode.
63 # This library class is no longer used and modules using this library should
64 # directly locate EFI_PEI_RECOVERY_MODULE_PPI defined in PI 1.2 specification.
65 RecoveryLib|Include/Library/RecoveryLib.h
66
67 ## @libraryclass Provides HII related functions.
68 HiiLib|Include/Library/HiiLib.h
69
70 ## @libraryclass Defines a set of interfaces on how to process capusle image update.
71 CapsuleLib|Include/Library/CapsuleLib.h
72
73 ## @libraryclass Library for Deferred Procedure Calls.
74 DpcLib|Include/Library/DpcLib.h
75
76 ## @libraryclass Provides global variables that are pointers
77 # to the UEFI HII related protocols.
78 #
79 UefiHiiServicesLib|Include/Library/UefiHiiServicesLib.h
80
81 ## @libraryclass Provides a set of interfaces to abstract the policy of security measurement.
82 #
83 SecurityManagementLib|Include/Library/SecurityManagementLib.h
84
85 ## @libraryclass OEM status code libary is used to report status code to OEM device.
86 #
87 OemHookStatusCodeLib|Include/Library/OemHookStatusCodeLib.h
88
89 ## @libraryclass Debug Agent is used to provide soft debug capability.
90 #
91 DebugAgentLib|Include/Library/DebugAgentLib.h
92
93 ## @libraryclass Provide platform specific hooks.
94 #
95 PlatformHookLib|Include/Library/PlatformHookLib.h
96
97 ## @libraryclass Provide platform specific hooks for SMM core.
98 #
99 SmmCorePlatformHookLib|Include/Library/SmmCorePlatformHookLib.h
100
101 ## @libraryclass Provide capability to maintain the data integrity cross S3 phase.
102 #
103 LockBoxLib|Include/Library/LockBoxLib.h
104
105 ## @libraryclass Provide the CPU exception handler.
106 #
107 CpuExceptionHandlerLib|Include/Library/CpuExceptionHandlerLib.h
108
109 ## @libraryclass Provides platform specific display interface.
110 #
111 CustomizedDisplayLib|Include/Library/CustomizedDisplayLib.h
112
113 ## @libraryclass Provides sorting functions
114 SortLib|Include/Library/SortLib.h
115
116 ## @libraryclass Provides core boot manager functions
117 UefiBootManagerLib|Include/Library/UefiBootManagerLib.h
118
119 ## @libraryclass Provides core boot manager functions
120 PlatformBootManagerLib|Include/Library/PlatformBootManagerLib.h
121
122 ## @libraryclass Provides common interfaces about TPM measurement for other modules.
123 #
124 TpmMeasurementLib|Include/Library/TpmMeasurementLib.h
125
126 ## @libraryclass Provides authenticated variable services.
127 #
128 AuthVariableLib|Include/Library/AuthVariableLib.h
129
130 ## @libraryclass Provides variable check services and database management.
131 #
132 VarCheckLib|Include/Library/VarCheckLib.h
133
134 ## @libraryclass Provides services to get variable error flag and do platform variable cleanup.
135 #
136 PlatformVarCleanupLib|Include/Library/PlatformVarCleanupLib.h
137
138 ## @libraryclass Provides services to get do the file explorer.
139 #
140 FileExplorerLib|Include/Library/FileExplorerLib.h
141
142 ## @libraryclass Provides interfaces about logo display.
143 #
144 BootLogoLib|Include/Library/BootLogoLib.h
145
146 ## @libraryclass Provides interfaces about Ipmi submit generic commond.
147 #
148 IpmiLib|Include/Library/IpmiLib.h
149
150 ## @libraryclass Provides interfaces for platform to return root bridge information to PciHostBridgeDxe driver.
151 #
152 PciHostBridgeLib|Include/Library/PciHostBridgeLib.h
153
154 ## @libraryclass Provides services to record memory profile of multilevel caller.
155 #
156 MemoryProfileLib|Include/Library/MemoryProfileLib.h
157
158 ## @libraryclass Provides an interface for performing UEFI Graphics Output Protocol Video blt operations.
159 ##
160 FrameBufferBltLib|Include/Library/FrameBufferBltLib.h
161
162 ## @libraryclass Provides services to authenticate a UEFI defined FMP Capsule.
163 #
164 FmpAuthenticationLib|Include/Library/FmpAuthenticationLib.h
165
166 ## @libraryclass Provides a service to register non-discoverable device
167 ##
168 NonDiscoverableDeviceRegistrationLib|Include/Library/NonDiscoverableDeviceRegistrationLib.h
169
170 [Guids]
171 ## MdeModule package token space guid
172 # Include/Guid/MdeModulePkgTokenSpace.h
173 gEfiMdeModulePkgTokenSpaceGuid = { 0xA1AFF049, 0xFDEB, 0x442a, { 0xB3, 0x20, 0x13, 0xAB, 0x4C, 0xB7, 0x2B, 0xBC }}
174
175 ## Hob guid for Pcd DataBase
176 # Include/Guid/PcdDataBaseHobGuid.h
177 gPcdDataBaseHobGuid = { 0xEA296D92, 0x0B69, 0x423C, { 0x8C, 0x28, 0x33, 0xB4, 0xE0, 0xA9, 0x12, 0x68 }}
178
179 ## Guid for PCD DataBase signature.
180 # Include/Guid/PcdDataBaseSignatureGuid.h
181 gPcdDataBaseSignatureGuid = { 0x3c7d193c, 0x682c, 0x4c14, { 0xa6, 0x8f, 0x55, 0x2d, 0xea, 0x4f, 0x43, 0x7e }}
182
183 ## Guid for EDKII implementation GUIDed opcodes
184 # Include/Guid/MdeModuleHii.h
185 gEfiIfrTianoGuid = { 0xf0b1735, 0x87a0, 0x4193, {0xb2, 0x66, 0x53, 0x8c, 0x38, 0xaf, 0x48, 0xce }}
186
187 ## Guid for EDKII implementation extension, used to indaicate there are bit fields in the varstore.
188 # Include/Guid/MdeModuleHii.h
189 gEdkiiIfrBitVarstoreGuid = {0x82DDD68B, 0x9163, 0x4187, {0x9B, 0x27, 0x20, 0xA8, 0xFD, 0x60,0xA7, 0x1D}}
190
191 ## Guid for Framework vfr GUIDed opcodes.
192 # Include/Guid/MdeModuleHii.h
193 gEfiIfrFrameworkGuid = { 0x31ca5d1a, 0xd511, 0x4931, { 0xb7, 0x82, 0xae, 0x6b, 0x2b, 0x17, 0x8c, 0xd7 }}
194
195 ## Guid to specify the System Non Volatile FV
196 # Include/Guid/SystemNvDataGuid.h
197 gEfiSystemNvDataFvGuid = { 0xFFF12B8D, 0x7696, 0x4C8B, { 0xA9, 0x85, 0x27, 0x47, 0x07, 0x5B, 0x4F, 0x50 }}
198
199 ## GUID used as the signature of FTW working block header.
200 # Include/Guid/SystemNvDataGuid.h
201 gEdkiiWorkingBlockSignatureGuid = { 0x9e58292b, 0x7c68, 0x497d, { 0xa0, 0xce, 0x65, 0x0, 0xfd, 0x9f, 0x1b, 0x95 }}
202
203 ## GUID used to build FTW last write data hob and install PPI to inform the check for FTW last write data has been done.
204 # Include/Guid/FaultTolerantWrite.h
205 gEdkiiFaultTolerantWriteGuid = { 0x1d3e9cb8, 0x43af, 0x490b, { 0x83, 0xa, 0x35, 0x16, 0xaa, 0x53, 0x20, 0x47 }}
206
207 ## Guid specify the device is the console out device.
208 # Include/Guid/ConsoleOutDevice.h
209 gEfiConsoleOutDeviceGuid = { 0xD3B36F2C, 0xD551, 0x11D4, { 0x9A, 0x46, 0x00, 0x90, 0x27, 0x3F, 0xC1, 0x4D }}
210
211 ## Guid specify the device is the console in device.
212 # Include/Guid/ConsoleInDevice.h
213 gEfiConsoleInDeviceGuid = { 0xD3B36F2B, 0xD551, 0x11D4, { 0x9A, 0x46, 0x00, 0x90, 0x27, 0x3F, 0xC1, 0x4D }}
214
215 ## Hob and Variable guid specify the platform memory type information.
216 # Include/Guid/MemoryTypeInformation.h
217 gEfiMemoryTypeInformationGuid = { 0x4C19049F, 0x4137, 0x4DD3, { 0x9C, 0x10, 0x8B, 0x97, 0xA8, 0x3F, 0xFD, 0xFA }}
218
219 ## Capsule update hob and variable guid
220 # Include/Guid/CapsuleVendor.h
221 gEfiCapsuleVendorGuid = { 0x711C703F, 0xC285, 0x4B10, { 0xA3, 0xB0, 0x36, 0xEC, 0xBD, 0x3C, 0x8B, 0xE2 }}
222
223 ## Guid specifiy the device is the StdErr device.
224 # Include/Guid/StandardErrorDevice.h
225 gEfiStandardErrorDeviceGuid = { 0xD3B36F2D, 0xD551, 0x11D4, { 0x9A, 0x46, 0x00, 0x90, 0x27, 0x3F, 0xC1, 0x4D }}
226
227 ## Guid acted as variable store header's signature and to specify the variable list entries put in the EFI system table.
228 # Include/Guid/VariableFormat.h
229 gEfiVariableGuid = { 0xddcf3616, 0x3275, 0x4164, { 0x98, 0xb6, 0xfe, 0x85, 0x70, 0x7f, 0xfe, 0x7d }}
230
231 ## Guid acted as the authenticated variable store header's signature, and to specify the variable list entries put in the EFI system table.
232 # Include/Guid/AuthenticatedVariableFormat.h
233 gEfiAuthenticatedVariableGuid = { 0xaaf32c78, 0x947b, 0x439a, { 0xa1, 0x80, 0x2e, 0x14, 0x4e, 0xc3, 0x77, 0x92 } }
234
235 # Include/Guid/VariableIndexTable.h
236 gEfiVariableIndexTableGuid = { 0x8cfdb8c8, 0xd6b2, 0x40f3, { 0x8e, 0x97, 0x02, 0x30, 0x7c, 0xc9, 0x8b, 0x7c }}
237
238 ## Guid is defined for SMM variable module to notify SMM variable wrapper module when variable write service was ready.
239 # Include/Guid/SmmVariableCommon.h
240 gSmmVariableWriteGuid = { 0x93ba1826, 0xdffb, 0x45dd, { 0x82, 0xa7, 0xe7, 0xdc, 0xaa, 0x3b, 0xbd, 0xf3 }}
241
242 ## Performance protocol guid that also acts as the performance HOB guid and performance variable GUID
243 # Include/Guid/Performance.h
244 gPerformanceProtocolGuid = { 0x76B6BDFA, 0x2ACD, 0x4462, { 0x9E, 0x3F, 0xCB, 0x58, 0xC9, 0x69, 0xD9, 0x37 } }
245 gSmmPerformanceProtocolGuid = { 0xf866226a, 0xeaa5, 0x4f5a, { 0xa9, 0xa, 0x6c, 0xfb, 0xa5, 0x7c, 0x58, 0x8e } }
246 gPerformanceExProtocolGuid = { 0x1ea81bec, 0xf01a, 0x4d98, { 0xa2, 0x1, 0x4a, 0x61, 0xce, 0x2f, 0xc0, 0x22 } }
247 gSmmPerformanceExProtocolGuid = { 0x931fc048, 0xc71d, 0x4455, { 0x89, 0x30, 0x47, 0x6, 0x30, 0xe3, 0xe, 0xe5 } }
248
249 ## Guid is defined for CRC32 encapsulation scheme.
250 # Include/Guid/Crc32GuidedSectionExtraction.h
251 gEfiCrc32GuidedSectionExtractionGuid = { 0xFC1BCDB0, 0x7D31, 0x49aa, {0x93, 0x6A, 0xA4, 0x60, 0x0D, 0x9D, 0xD0, 0x83 } }
252
253 ## Include/Guid/StatusCodeCallbackGuid.h
254 gStatusCodeCallbackGuid = {0xe701458c, 0x4900, 0x4ca5, {0xb7, 0x72, 0x3d, 0x37, 0x94, 0x9f, 0x79, 0x27}}
255
256 ## GUID identifies status code records HOB that originate from the PEI status code
257 # Include/Guid/MemoryStatusCodeRecord.h
258 gMemoryStatusCodeRecordGuid = { 0x060CC026, 0x4C0D, 0x4DDA, { 0x8F, 0x41, 0x59, 0x5F, 0xEF, 0x00, 0xA5, 0x02 }}
259
260 ## GUID used to pass DEBUG() macro information through the Status Code Protocol and Status Code PPI
261 # Include/Guid/StatusCodeDataTypeDebug.h
262 gEfiStatusCodeDataTypeDebugGuid = { 0x9A4E9246, 0xD553, 0x11D5, { 0x87, 0xE2, 0x00, 0x06, 0x29, 0x45, 0xC3, 0xB9 }}
263
264 ## A configuration Table Guid for Load module at fixed address
265 # Include/Guid/LoadModuleAtFixedAddress.h
266 gLoadFixedAddressConfigurationTableGuid = { 0x2CA88B53,0xD296,0x4080, { 0xA4,0xA5,0xCA,0xD9,0xBA,0xE2,0x4B,0x9 } }
267
268 ## GUID used to store the global debug mask value into an EFI Variable
269 # Include/Guid/DebugMask.h
270 gEfiGenericVariableGuid = { 0x59d1c24f, 0x50f1, 0x401a, {0xb1, 0x01, 0xf3, 0x3e, 0x0d, 0xae, 0xd4, 0x43} }
271
272 ## Event for the DXE Core to signal idle events
273 # Include/Guid/EventIdle.h
274 gIdleLoopEventGuid = { 0x3c8d294c, 0x5fc3, 0x4451, { 0xbb, 0x31, 0xc4, 0xc0, 0x32, 0x29, 0x5e, 0x6c } }
275
276 ## Include/Guid/RecoveryDevice.h
277 gRecoveryOnFatUsbDiskGuid = { 0x0FFBCE19, 0x324C, 0x4690, { 0xA0, 0x09, 0x98, 0xC6, 0xAE, 0x2E, 0xB1, 0x86 }}
278
279 ## Include/Guid/RecoveryDevice.h
280 gRecoveryOnFatIdeDiskGuid = { 0xB38573B6, 0x6200, 0x4AC5, { 0xB5, 0x1D, 0x82, 0xE6, 0x59, 0x38, 0xD7, 0x83 }}
281
282 ## Include/Guid/RecoveryDevice.h
283 gRecoveryOnFatFloppyDiskGuid = { 0x2E3D2E75, 0x9B2E, 0x412D, { 0xB4, 0xB1, 0x70, 0x41, 0x6B, 0x87, 0x00, 0xFF }}
284
285 ## Include/Guid/RecoveryDevice.h
286 gRecoveryOnDataCdGuid = { 0x5CAC0099, 0x0DC9, 0x48E5, { 0x80, 0x68, 0xBB, 0x95, 0xF5, 0x40, 0x0A, 0x9F }}
287
288 ## Include/Guid/SmmLockBox.h
289 gEfiSmmLockBoxCommunicationGuid = { 0x2a3cfebd, 0x27e8, 0x4d0a, { 0x8b, 0x79, 0xd6, 0x88, 0xc2, 0xa3, 0xe1, 0xc0 }}
290
291 ## Include/Guid/AcpiS3Context.h
292 gEfiAcpiVariableGuid = { 0xAF9FFD67, 0xEC10, 0x488A, { 0x9D, 0xFC, 0x6C, 0xBF, 0x5E, 0xE2, 0x2C, 0x2E }}
293
294 ## Include/Guid/AcpiS3Context.h
295 gEfiAcpiS3ContextGuid = { 0xef98d3a, 0x3e33, 0x497a, { 0xa4, 0x1, 0x77, 0xbe, 0x3e, 0xb7, 0x4f, 0x38 }}
296
297 ## Include/Guid/BootScriptExecutorVariable.h
298 gEfiBootScriptExecutorVariableGuid = { 0x3079818c, 0x46d4, 0x4a73, { 0xae, 0xf3, 0xe3, 0xe4, 0x6c, 0xf1, 0xee, 0xdb }}
299 gEfiBootScriptExecutorContextGuid = { 0x79cb58c4, 0xac51, 0x442f, { 0xaf, 0xd7, 0x98, 0xe4, 0x7d, 0x2e, 0x99, 0x8 }}
300
301 ## Include/Guid/UsbKeyBoardLayout.h
302 gUsbKeyboardLayoutPackageGuid = { 0xc0f3b43, 0x44de, 0x4907, { 0xb4, 0x78, 0x22, 0x5f, 0x6f, 0x62, 0x89, 0xdc }}
303 gUsbKeyboardLayoutKeyGuid = { 0x3a4d7a7c, 0x18a, 0x4b42, { 0x81, 0xb3, 0xdc, 0x10, 0xe3, 0xb5, 0x91, 0xbd }}
304
305 ## Include/Guid/HiiResourceSampleHii.h
306 gHiiResourceSamleFormSetGuid = { 0x4f4ef7f0, 0xaa29, 0x4ce9, { 0xba, 0x41, 0x64, 0x3e, 0x1, 0x23, 0xa9, 0x9f }}
307
308 ## Include/Guid/DriverSampleHii.h
309 gDriverSampleFormSetGuid = { 0xA04A27f4, 0xDF00, 0x4D42, { 0xB5, 0x52, 0x39, 0x51, 0x13, 0x02, 0x11, 0x3D }}
310 gDriverSampleInventoryGuid = { 0xb3f56470, 0x6141, 0x4621, { 0x8f, 0x19, 0x70, 0x4e, 0x57, 0x7a, 0xa9, 0xe8 }}
311 gEfiIfrRefreshIdOpGuid = { 0xF5E655D9, 0x02A6, 0x46f2, { 0x9E, 0x76, 0xB8, 0xBE, 0x8E, 0x60, 0xAB, 0x22 }}
312
313 ## Include/Guid/PlatDriOverrideHii.h
314 gPlatformOverridesManagerGuid = { 0x8614567d, 0x35be, 0x4415, { 0x8d, 0x88, 0xbd, 0x7d, 0xc, 0x9c, 0x70, 0xc0 }}
315
316 ## Include/Guid/Ip4Config2Hii.h
317 gIp4Config2NvDataGuid = { 0x9b942747, 0x154e, 0x4d29, { 0xa4, 0x36, 0xbf, 0x71, 0x0, 0xc8, 0xb5, 0x3b }}
318
319 ## Include/Guid/VlanConfigHii.h
320 gVlanConfigFormSetGuid = { 0xd79df6b0, 0xef44, 0x43bd, { 0x97, 0x97, 0x43, 0xe9, 0x3b, 0xcf, 0x5f, 0xa8 }}
321
322 ## Include/Guid/Ip4IScsiConfigHii.h
323 gIp4IScsiConfigGuid = { 0x6456ed61, 0x3579, 0x41c9, { 0x8a, 0x26, 0x0a, 0x0b, 0xd6, 0x2b, 0x78, 0xfc }}
324 gIScsiCHAPAuthInfoGuid = { 0x786ec0ac, 0x65ae, 0x4d1b, { 0xb1, 0x37, 0xd, 0x11, 0xa, 0x48, 0x37, 0x97 }}
325
326 ## Include/Guid/ZeroGuid.h
327 gZeroGuid = { 0x0, 0x0, 0x0, {0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0}}
328
329 ## Include/Guid/MtcVendor.h
330 gMtcVendorGuid = { 0xeb704011, 0x1402, 0x11d3, { 0x8e, 0x77, 0x0, 0xa0, 0xc9, 0x69, 0x72, 0x3b }}
331
332 ## Guid for Firmware Performance Data Table (FPDT) implementation.
333 # Include/Guid/FirmwarePerformance.h
334 gEfiFirmwarePerformanceGuid = { 0xc095791a, 0x3001, 0x47b2, { 0x80, 0xc9, 0xea, 0xc7, 0x31, 0x9f, 0x2f, 0xa4 }}
335 gFirmwarePerformanceS3PointerGuid = { 0xdc65adc, 0xa973, 0x4130, { 0x8d, 0xf0, 0x2a, 0xdb, 0xeb, 0x9e, 0x4a, 0x31 }}
336
337 ## Include/Guid/ExitBootServiceFailed.h
338 gEventExitBootServicesFailedGuid = { 0x4f6c5507, 0x232f, 0x4787, { 0xb9, 0x5e, 0x72, 0xf8, 0x62, 0x49, 0xc, 0xb1 } }
339
340 ## Include/Guid/ConnectConInEvent.h
341 gConnectConInEventGuid = { 0xdb4e8151, 0x57ed, 0x4bed, { 0x88, 0x33, 0x67, 0x51, 0xb5, 0xd1, 0xa8, 0xd7 }}
342
343 ## Include/Guid/StatusCodeDataTypeVariable.h
344 gEdkiiStatusCodeDataTypeVariableGuid = { 0xf6ee6dbb, 0xd67f, 0x4ea0, { 0x8b, 0x96, 0x6a, 0x71, 0xb1, 0x9d, 0x84, 0xad }}
345
346 ## Include/Guid/MemoryProfile.h
347 gEdkiiMemoryProfileGuid = { 0x821c9a09, 0x541a, 0x40f6, { 0x9f, 0x43, 0xa, 0xd1, 0x93, 0xa1, 0x2c, 0xfe }}
348 gEdkiiSmmMemoryProfileGuid = { 0xe22bbcca, 0x516a, 0x46a8, { 0x80, 0xe2, 0x67, 0x45, 0xe8, 0x36, 0x93, 0xbd }}
349
350 ## Include/Protocol/VarErrorFlag.h
351 gEdkiiVarErrorFlagGuid = { 0x4b37fe8, 0xf6ae, 0x480b, { 0xbd, 0xd5, 0x37, 0xd9, 0x8c, 0x5e, 0x89, 0xaa } }
352
353 ## GUID indicates the BROTLI custom compress/decompress algorithm.
354 gBrotliCustomDecompressGuid = { 0x3D532050, 0x5CDA, 0x4FD0, { 0x87, 0x9E, 0x0F, 0x7F, 0x63, 0x0D, 0x5A, 0xFB }}
355
356 ## GUID indicates the LZMA custom compress/decompress algorithm.
357 # Include/Guid/LzmaDecompress.h
358 gLzmaCustomDecompressGuid = { 0xEE4E5898, 0x3914, 0x4259, { 0x9D, 0x6E, 0xDC, 0x7B, 0xD7, 0x94, 0x03, 0xCF }}
359 gLzmaF86CustomDecompressGuid = { 0xD42AE6BD, 0x1352, 0x4bfb, { 0x90, 0x9A, 0xCA, 0x72, 0xA6, 0xEA, 0xE8, 0x89 }}
360
361 ## Include/Guid/TtyTerm.h
362 gEfiTtyTermGuid = { 0x7d916d80, 0x5bb1, 0x458c, {0xa4, 0x8f, 0xe2, 0x5f, 0xdd, 0x51, 0xef, 0x94 }}
363
364 ## Include/Guid/HiiBootMaintenanceFormset.h
365 gEfiIfrBootMaintenanceGuid = { 0xb2dedc91, 0xd59f, 0x48d2, { 0x89, 0x8a, 0x12, 0x49, 0xc, 0x74, 0xa4, 0xe0 }}
366
367 gEfiIfrFrontPageGuid = { 0xe58809f8, 0xfbc1, 0x48e2, { 0x88, 0x3a, 0xa3, 0x0f, 0xdc, 0x4b, 0x44, 0x1e } }
368
369 ## Include/Guid/RamDiskHii.h
370 gRamDiskFormSetGuid = { 0x2a46715f, 0x3581, 0x4a55, { 0x8e, 0x73, 0x2b, 0x76, 0x9a, 0xaa, 0x30, 0xc5 }}
371
372 ## Include/Guid/PiSmmCommunicationRegionTable.h
373 gEdkiiPiSmmCommunicationRegionTableGuid = { 0x4e28ca50, 0xd582, 0x44ac, {0xa1, 0x1f, 0xe3, 0xd5, 0x65, 0x26, 0xdb, 0x34}}
374
375 ## Include/Guid/PiSmmMemoryAttributesTable.h
376 gEdkiiPiSmmMemoryAttributesTableGuid = { 0x6b9fd3f7, 0x16df, 0x45e8, {0xbd, 0x39, 0xb9, 0x4a, 0x66, 0x54, 0x1a, 0x5d}}
377
378 ## Include/Guid/SmiHandlerProfile.h
379 gSmiHandlerProfileGuid = {0x49174342, 0x7108, 0x409b, {0x8b, 0xbe, 0x65, 0xfd, 0xa8, 0x53, 0x89, 0xf5}}
380
381 ## Include/Guid/NonDiscoverableDevice.h
382 gEdkiiNonDiscoverableAhciDeviceGuid = { 0xC7D35798, 0xE4D2, 0x4A93, {0xB1, 0x45, 0x54, 0x88, 0x9F, 0x02, 0x58, 0x4B } }
383 gEdkiiNonDiscoverableAmbaDeviceGuid = { 0x94440339, 0xCC93, 0x4506, {0xB4, 0xC6, 0xEE, 0x8D, 0x0F, 0x4C, 0xA1, 0x91 } }
384 gEdkiiNonDiscoverableEhciDeviceGuid = { 0xEAEE5615, 0x0CFD, 0x45FC, {0x87, 0x69, 0xA0, 0xD8, 0x56, 0x95, 0xAF, 0x85 } }
385 gEdkiiNonDiscoverableNvmeDeviceGuid = { 0xC5F25542, 0x2A79, 0x4A26, {0x81, 0xBB, 0x4E, 0xA6, 0x32, 0x33, 0xB3, 0x09 } }
386 gEdkiiNonDiscoverableOhciDeviceGuid = { 0xB20005B0, 0xBB2D, 0x496F, {0x86, 0x9C, 0x23, 0x0B, 0x44, 0x79, 0xE7, 0xD1 } }
387 gEdkiiNonDiscoverableSdhciDeviceGuid = { 0x1DD1D619, 0xF9B8, 0x463E, {0x86, 0x81, 0xD1, 0xDC, 0x7C, 0x07, 0xB7, 0x2C } }
388 gEdkiiNonDiscoverableUfsDeviceGuid = { 0x2EA77912, 0x80A8, 0x4947, {0xBE, 0x69, 0xCD, 0xD0, 0x0A, 0xFB, 0xE5, 0x56 } }
389 gEdkiiNonDiscoverableUhciDeviceGuid = { 0xA8CDA0A2, 0x4F37, 0x4A1B, {0x8E, 0x10, 0x8E, 0xF3, 0xCC, 0x3B, 0xF3, 0xA8 } }
390 gEdkiiNonDiscoverableXhciDeviceGuid = { 0xB1BE0BC5, 0x6C28, 0x442D, {0xAA, 0x37, 0x15, 0x1B, 0x42, 0x57, 0xBD, 0x78 } }
391
392 ## Include/Guid/PlatformHasAcpi.h
393 gEdkiiPlatformHasAcpiGuid = { 0xf0966b41, 0xc23f, 0x41b9, { 0x96, 0x04, 0x0f, 0xf7, 0xe1, 0x11, 0x96, 0x5a } }
394
395 [Ppis]
396 ## Include/Ppi/AtaController.h
397 gPeiAtaControllerPpiGuid = { 0xa45e60d1, 0xc719, 0x44aa, { 0xb0, 0x7a, 0xaa, 0x77, 0x7f, 0x85, 0x90, 0x6d }}
398
399 ## Include/Ppi/UsbHostController.h
400 gPeiUsbHostControllerPpiGuid = { 0x652B38A9, 0x77F4, 0x453F, { 0x89, 0xD5, 0xE7, 0xBD, 0xC3, 0x52, 0xFC, 0x53 }}
401
402 ## Include/Ppi/Usb2HostController.h
403 gPeiUsb2HostControllerPpiGuid = { 0xfedd6305, 0xe2d7, 0x4ed5, { 0x9f, 0xaa, 0xda, 0x8, 0xe, 0x33, 0x6c, 0x22 }}
404
405 ## Include/Ppi/UsbController.h
406 gPeiUsbControllerPpiGuid = { 0x3BC1F6DE, 0x693E, 0x4547, { 0xA3, 0x00, 0x21, 0x82, 0x3C, 0xA4, 0x20, 0xB2 }}
407
408 ## Include/Ppi/UsbIo.h
409 gPeiUsbIoPpiGuid = { 0x7C29785C, 0x66B9, 0x49FC, { 0xB7, 0x97, 0x1C, 0xA5, 0x55, 0x0E, 0xF2, 0x83 }}
410
411 ## Include/Ppi/SecPerformance.h
412 gPeiSecPerformancePpiGuid = { 0x0ecc666b, 0x4662, 0x47f9, { 0x9d, 0xd5, 0xd0, 0x96, 0xff, 0x7d, 0xa4, 0x9e }}
413
414 ## Include/Ppi/SmmCommunication.h
415 gEfiPeiSmmCommunicationPpiGuid = { 0xae933e1c, 0xcc47, 0x4e38, { 0x8f, 0xe, 0xe2, 0xf6, 0x1d, 0x26, 0x5, 0xdf }}
416
417 ## Include/Ppi/SmmAccess.h
418 gPeiSmmAccessPpiGuid = { 0x268f33a9, 0xcccd, 0x48be, { 0x88, 0x17, 0x86, 0x5, 0x3a, 0xc3, 0x2e, 0xd6 }}
419
420 ## Include/Ppi/SmmControl.h
421 gPeiSmmControlPpiGuid = { 0x61c68702, 0x4d7e, 0x4f43, { 0x8d, 0xef, 0xa7, 0x43, 0x5, 0xce, 0x74, 0xc5 }}
422
423 ## Include/Ppi/PostBootScriptTable.h
424 gPeiPostScriptTablePpiGuid = { 0x88c9d306, 0x900, 0x4eb5, { 0x82, 0x60, 0x3e, 0x2d, 0xbe, 0xda, 0x1f, 0x89}}
425
426 ## Include/Ppi/SerialPortPei.h
427 gPeiSerialPortPpiGuid = { 0x490e9d85, 0x8aef, 0x4193, { 0x8e, 0x56, 0xf7, 0x34, 0xa9, 0xff, 0xac, 0x8b}}
428
429 ## Include/Ppi/UfsHostController.h
430 gEdkiiPeiUfsHostControllerPpiGuid = { 0xdc54b283, 0x1a77, 0x4cd6, { 0x83, 0xbb, 0xfd, 0xda, 0x46, 0x9a, 0x2e, 0xc6 }}
431
432 ## Include/Ppi/IpmiPpi.h
433 gPeiIpmiPpiGuid = { 0xa9731431, 0xd968, 0x4277, { 0xb7, 0x52, 0xa3, 0xa9, 0xa6, 0xae, 0x18, 0x98 }}
434
435 ## Include/Ppi/SdMmcHostController.h
436 gEdkiiPeiSdMmcHostControllerPpiGuid = { 0xb30dfeed, 0x947f, 0x4396, { 0xb1, 0x5a, 0xdf, 0xbd, 0xb9, 0x16, 0xdc, 0x24 }}
437
438 ## Include/Ppi/IoMmu.h
439 gEdkiiIoMmuPpiGuid = { 0x70b0af26, 0xf847, 0x4bb6, { 0xaa, 0xb9, 0xcd, 0xe8, 0x4f, 0xc6, 0x14, 0x31 } }
440
441 [Protocols]
442 ## Load File protocol provides capability to load and unload EFI image into memory and execute it.
443 # Include/Protocol/LoadPe32Image.h
444 # This protocol is deprecated. Native EDKII module should NOT use this protocol to load/unload image.
445 # If developer need implement such functionality, they should use BasePeCoffLib.
446 gEfiLoadPeImageProtocolGuid = { 0x5CB5C776, 0x60D5, 0x45EE, { 0x88, 0x3C, 0x45, 0x27, 0x08, 0xCD, 0x74, 0x3F }}
447
448 ## Print protocols define basic print functions to print the format unicode and ascii string.
449 # Include/Protocol/Print2.h
450 gEfiPrint2ProtocolGuid = { 0xf05976ef, 0x83f1, 0x4f3d, { 0x86, 0x19, 0xf7, 0x59, 0x5d, 0x41, 0xe5, 0x38 } }
451 gEfiPrint2SProtocolGuid = { 0xcc252d2, 0xc106, 0x4661, { 0xb5, 0xbd, 0x31, 0x47, 0xa4, 0xf8, 0x1f, 0x92 } }
452
453 ## This protocol defines the generic memory test interfaces in Dxe phase.
454 # Include/Protocol/GenericMemoryTest.h
455 gEfiGenericMemTestProtocolGuid = { 0x309DE7F1, 0x7F5E, 0x4ACE, { 0xB4, 0x9C, 0x53, 0x1B, 0xE5, 0xAA, 0x95, 0xEF }}
456
457 ## This protocol defines the Debugger Configuration interface.
458 # Include/Protocol/DebuggerConfiguration.h
459 gEfiDebuggerConfigurationProtocolGuid = { 0x577d959c, 0xe967, 0x4546, { 0x86, 0x20, 0xc7, 0x78, 0xfa, 0xe5, 0xda, 0x05 }}
460
461 ## Include/Protocol/Dpc.h
462 gEfiDpcProtocolGuid = {0x480f8ae9, 0xc46, 0x4aa9, { 0xbc, 0x89, 0xdb, 0x9f, 0xba, 0x61, 0x98, 0x6 }}
463
464 ## Fault Tolerant Write protocol provides boot-time service to do fault tolerant write capability for block devices.
465 # Include/Protocol/FaultTolerantWrite.h
466 gEfiFaultTolerantWriteProtocolGuid = { 0x3EBD9E82, 0x2C78, 0x4DE6, { 0x97, 0x86, 0x8D, 0x4B, 0xFC, 0xB7, 0xC8, 0x81 }}
467
468 ## This protocol provides boot-time service to do fault tolerant write capability for block devices in SMM environment.
469 # Include/Protocol/SmmFaultTolerantWrite.h
470 gEfiSmmFaultTolerantWriteProtocolGuid = { 0x3868fc3b, 0x7e45, 0x43a7, { 0x90, 0x6c, 0x4b, 0xa4, 0x7d, 0xe1, 0x75, 0x4d }}
471
472 ## This protocol is used to abstract the swap operation of boot block and backup block of boot FV.
473 # Include/Protocol/SwapAddressRange.h
474 gEfiSwapAddressRangeProtocolGuid = { 0x1259F60D, 0xB754, 0x468E, { 0xA7, 0x89, 0x4D, 0xB8, 0x5D, 0x55, 0xE8, 0x7E }}
475
476 ## This protocol is used to abstract the swap operation of boot block and backup block of boot FV in SMM environment.
477 # Include/Protocol/SmmSwapAddressRange.h
478 gEfiSmmSwapAddressRangeProtocolGuid = { 0x67c4f112, 0x3385, 0x4e55, { 0x9c, 0x5b, 0xc0, 0x5b, 0x71, 0x7c, 0x42, 0x28 }}
479
480 ## This protocol is intended for use as a means to store data in the EFI SMM environment.
481 # Include/Protocol/SmmVariableProtocol.h
482 gEfiSmmVariableProtocolGuid = { 0xed32d533, 0x99e6, 0x4209, { 0x9c, 0xc0, 0x2d, 0x72, 0xcd, 0xd9, 0x98, 0xa7 }}
483
484 ## This protocol is intended for use as a means to mark a variable read-only after the event EFI_END_OF_DXE_EVENT_GUID is signaled.
485 # Include/Protocol/VariableLock.h
486 gEdkiiVariableLockProtocolGuid = { 0xcd3d0a05, 0x9e24, 0x437c, { 0xa8, 0x91, 0x1e, 0xe0, 0x53, 0xdb, 0x76, 0x38 }}
487
488 ## Include/Protocol/VarCheck.h
489 gEdkiiVarCheckProtocolGuid = { 0xaf23b340, 0x97b4, 0x4685, { 0x8d, 0x4f, 0xa3, 0xf2, 0x81, 0x69, 0xb2, 0x1d } }
490
491 ## Include/Protocol/SmmVarCheck.h
492 gEdkiiSmmVarCheckProtocolGuid = { 0xb0d8f3c1, 0xb7de, 0x4c11, { 0xbc, 0x89, 0x2f, 0xb5, 0x62, 0xc8, 0xc4, 0x11 } }
493
494 ## This protocol is similar with DXE FVB protocol and used in the UEFI SMM evvironment.
495 # Include/Protocol/SmmFirmwareVolumeBlock.h
496 gEfiSmmFirmwareVolumeBlockProtocolGuid = { 0xd326d041, 0xbd31, 0x4c01, { 0xb5, 0xa8, 0x62, 0x8b, 0xe8, 0x7f, 0x6, 0x53 }}
497
498 ## This protocol allows the error level mask for DEBUG() macros to be adjusted for DXE Phase modules
499 # Include/Guid/DebugMask.h
500 gEfiDebugMaskProtocolGuid = { 0x4c8a2451, 0xc207, 0x405b, {0x96, 0x94, 0x99, 0xea, 0x13, 0x25, 0x13, 0x41} }
501
502 ## Include/Protocol/LockBox.h
503 gEfiLockBoxProtocolGuid = { 0xbd445d79, 0xb7ad, 0x4f04, { 0x9a, 0xd8, 0x29, 0xbd, 0x20, 0x40, 0xeb, 0x3c }}
504
505 ## Include/Protocol/FormBrowserEx.h
506 gEfiFormBrowserExProtocolGuid = { 0x1f73b18d, 0x4630, 0x43c1, { 0xa1, 0xde, 0x6f, 0x80, 0x85, 0x5d, 0x7d, 0xa4 } }
507 gEdkiiFormBrowserExProtocolGuid = { 0x1f73b18d, 0x4630, 0x43c1, { 0xa1, 0xde, 0x6f, 0x80, 0x85, 0x5d, 0x7d, 0xa4 } }
508
509 ## Include/Protocol/EbcVmTest.h
510 gEfiEbcVmTestProtocolGuid = { 0xAAEACCFD, 0xF27B, 0x4C17, { 0xB6, 0x10, 0x75, 0xCA, 0x1F, 0x2D, 0xFB, 0x52 } }
511
512 ## Include/Protocol/EbcSimpleDebugger.h
513 gEfiEbcSimpleDebuggerProtocolGuid = { 0x2a72d11e, 0x7376, 0x40f6, { 0x9c, 0x68, 0x23, 0xfa, 0x2f, 0xe3, 0x63, 0xf1 } }
514
515 ## Include/Protocol/BootLogo.h
516 gEfiBootLogoProtocolGuid = { 0xcdea2bd3, 0xfc25, 0x4c1c, { 0xb9, 0x7c, 0xb3, 0x11, 0x86, 0x6, 0x49, 0x90 } }
517
518 ## Include/Protocol/DisplayProtocol.h
519 gEdkiiFormDisplayEngineProtocolGuid = { 0x9bbe29e9, 0xfda1, 0x41ec, { 0xad, 0x52, 0x45, 0x22, 0x13, 0x74, 0x2d, 0x2e } }
520
521 ## Include/Protocol/FormBrowserEx2.h
522 gEdkiiFormBrowserEx2ProtocolGuid = { 0xa770c357, 0xb693, 0x4e6d, { 0xa6, 0xcf, 0xd2, 0x1c, 0x72, 0x8e, 0x55, 0xb } }
523
524 ## Include/Protocol/UfsHostController.h
525 gEdkiiUfsHostControllerProtocolGuid = { 0xebc01af5, 0x7a9, 0x489e, { 0xb7, 0xce, 0xdc, 0x8, 0x9e, 0x45, 0x9b, 0x2f } }
526
527 ## Include/Protocol/EsrtManagement.h
528 gEsrtManagementProtocolGuid = { 0xa340c064, 0x723c, 0x4a9c, { 0xa4, 0xdd, 0xd5, 0xb4, 0x7a, 0x26, 0xfb, 0xb0 }}
529
530 ## Include/Protocol/SmmExitBootServices.h
531 gEdkiiSmmExitBootServicesProtocolGuid = { 0x296eb418, 0xc4c8, 0x4e05, { 0xab, 0x59, 0x39, 0xe8, 0xaf, 0x56, 0xf0, 0xa } }
532
533 ## Include/Protocol/SmmLegacyBoot.h
534 gEdkiiSmmLegacyBootProtocolGuid = { 0x85a8ab57, 0x644, 0x4110, { 0x85, 0xf, 0x98, 0x13, 0x22, 0x4, 0x70, 0x70 } }
535
536 ## Include/Protocol/SmmReadyToBoot.h
537 gEdkiiSmmReadyToBootProtocolGuid = { 0x6e057ecf, 0xfa99, 0x4f39, { 0x95, 0xbc, 0x59, 0xf9, 0x92, 0x1d, 0x17, 0xe4 } }
538
539 ## Include/Protocol/PlatformLogo.h
540 gEdkiiPlatformLogoProtocolGuid = { 0x53cd299f, 0x2bc1, 0x40c0, { 0x8c, 0x07, 0x23, 0xf6, 0x4f, 0xdb, 0x30, 0xe0 } }
541
542 ## Include/Protocol/FileExplorer.h
543 gEfiFileExplorerProtocolGuid = { 0x2C03C536, 0x4594, 0x4515, { 0x9E, 0x7A, 0xD3, 0xD2, 0x04, 0xFE, 0x13, 0x63 } }
544
545 ## Include/Protocol/IpmiProtocol.h
546 gIpmiProtocolGuid = { 0xdbc6381f, 0x5554, 0x4d14, { 0x8f, 0xfd, 0x76, 0xd7, 0x87, 0xb8, 0xac, 0xbf } }
547 gSmmIpmiProtocolGuid = { 0x5169af60, 0x8c5a, 0x4243, { 0xb3, 0xe9, 0x56, 0xc5, 0x6d, 0x18, 0xee, 0x26 } }
548
549 ## PS/2 policy protocol abstracts the specific platform initialization and setting.
550 # Include/Protocol/Ps2Policy.h
551 gEfiPs2PolicyProtocolGuid = { 0x4DF19259, 0xDC71, 0x4D46, { 0xBE, 0xF1, 0x35, 0x7B, 0xB5, 0x78, 0xC4, 0x18 } }
552
553 ## Include/Protocol/NonDiscoverableDevice.h
554 gEdkiiNonDiscoverableDeviceProtocolGuid = { 0x0d51905b, 0xb77e, 0x452a, {0xa2, 0xc0, 0xec, 0xa0, 0xcc, 0x8d, 0x51, 0x4a } }
555
556 ## Include/Protocol/IoMmu.h
557 gEdkiiIoMmuProtocolGuid = { 0x4e939de9, 0xd948, 0x4b0f, { 0x88, 0xed, 0xe6, 0xe1, 0xce, 0x51, 0x7c, 0x1e } }
558
559 ## Include/Protocol/SmmEndofS3Resume.h
560 gEdkiiSmmEndOfS3ResumeProtocolGuid = { 0x96f5296d, 0x05f7, 0x4f3c, {0x84, 0x67, 0xe4, 0x56, 0x89, 0x0e, 0x0c, 0xb5 } }
561
562 ## Include/Protocol/SmmMemoryAttribute.h
563 gEdkiiSmmMemoryAttributeProtocolGuid = { 0x69b792ea, 0x39ce, 0x402d, { 0xa2, 0xa6, 0xf7, 0x21, 0xde, 0x35, 0x1d, 0xfe } }
564
565 #
566 # [Error.gEfiMdeModulePkgTokenSpaceGuid]
567 # 0x80000001 | Invalid value provided.
568 # 0x80000002 | Reserved bits must be set to zero.
569 # 0x80000003 | Incorrect progress code provided.
570 # 0x80000004 | Invalid foreground color specified.
571 # 0x80000005 | Invalid background color specified.
572 # 0x80000006 | Incorrect error code provided.
573 #
574
575 [PcdsFeatureFlag]
576 ## Indicates if the platform can support update capsule across a system reset.<BR><BR>
577 # TRUE - Supports update capsule across a system reset.<BR>
578 # FALSE - Does not support update capsule across a system reset.<BR>
579 # @Prompt Enable update capsule across a system reset.
580 gEfiMdeModulePkgTokenSpaceGuid.PcdSupportUpdateCapsuleReset|FALSE|BOOLEAN|0x0001001d
581
582 ## Indicates if all PCD PPI services will be enabled.<BR><BR>
583 # TRUE - All PCD PPI services will be produced.<BR>
584 # FALSE - Minimal PCD PPI services (only GetService) will be produced.<BR>
585 # @Prompt Enable full PEI PCD services.
586 gEfiMdeModulePkgTokenSpaceGuid.PcdPeiFullPcdDatabaseEnable|TRUE|BOOLEAN|0x00010020
587
588 ## Indicates if the Device Path To Text Protocol should be produced by the platform.
589 # It can be disabled to save size.<BR><BR>
590 # TRUE - Device Path To Text Protocol will be produced.<BR>
591 # FALSE - Device Path To Text Protocol will not be produced.<BR>
592 # @Prompt Enable Device Path to Text support.
593 gEfiMdeModulePkgTokenSpaceGuid.PcdDevicePathSupportDevicePathToText|TRUE|BOOLEAN|0x00010037
594
595 ## Indicates if the Device Path From Text Protocol should be produced by the platform.
596 # It can be disabled to save size.<BR><BR>
597 # TRUE - Device Path From Text Protocol will be produced.<BR>
598 # FALSE - Device Path From Text Protocol will not be produced.<BR>
599 # @Prompt Enable Device Path From Text support.
600 gEfiMdeModulePkgTokenSpaceGuid.PcdDevicePathSupportDevicePathFromText|TRUE|BOOLEAN|0x00010038
601
602 ## Indicates if the statistics about variable usage will be collected. This information is
603 # stored as a vendor configuration table into the EFI system table.
604 # Set this PCD to TRUE to use VariableInfo application in MdeModulePkg\Application directory to get
605 # variable usage info. VariableInfo application will not output information if not set to TRUE.<BR><BR>
606 # TRUE - Statistics about variable usage will be collected.<BR>
607 # FALSE - Statistics about variable usage will not be collected.<BR>
608 # @Prompt Enable variable statistics collection.
609 gEfiMdeModulePkgTokenSpaceGuid.PcdVariableCollectStatistics|FALSE|BOOLEAN|0x0001003f
610
611 ## Indicates if Unicode Collation Protocol will be installed.<BR><BR>
612 # TRUE - Installs Unicode Collation Protocol.<BR>
613 # FALSE - Does not install Unicode Collation Protocol.<BR>
614 # @Prompt Enable Unicode Collation support.
615 gEfiMdeModulePkgTokenSpaceGuid.PcdUnicodeCollationSupport|TRUE|BOOLEAN|0x00010040
616
617 ## Indicates if Unicode Collation 2 Protocol will be installed.<BR><BR>
618 # TRUE - Installs Unicode Collation 2 Protocol.<BR>
619 # FALSE - Does not install Unicode Collation 2 Protocol.<BR>
620 # @Prompt Enable Unicode Collation 2 support.
621 gEfiMdeModulePkgTokenSpaceGuid.PcdUnicodeCollation2Support|TRUE|BOOLEAN|0x00010041
622
623 ## Indicates if Graphics Output Protocol will be installed on virtual handle created by ConsplitterDxe.
624 # It could be set FALSE to save size.<BR><BR>
625 # TRUE - Installs Graphics Output Protocol on virtual handle created by ConsplitterDxe.<BR>
626 # FALSE - Does not install Graphics Output Protocol on virtual handle created by ConsplitterDxe.<BR>
627 # @Prompt Enable ConOut GOP support.
628 gEfiMdeModulePkgTokenSpaceGuid.PcdConOutGopSupport|TRUE|BOOLEAN|0x00010042
629
630 ## Indicates if UGA Draw Protocol will be installed on virtual handle created by ConsplitterDxe.
631 # It could be set FALSE to save size.<BR><BR>
632 # TRUE - Installs UGA Draw Protocol on virtual handle created by ConsplitterDxe.<BR>
633 # FALSE - Does not install UGA Draw Protocol on virtual handle created by ConsplitterDxe.<BR>
634 # @Prompt Enable ConOut UGA support.
635 gEfiMdeModulePkgTokenSpaceGuid.PcdConOutUgaSupport|TRUE|BOOLEAN|0x00010043
636
637 ## Indicates PeiCore will first search TE section from the PEIM to load the image, or PE32 section, when PeiCore dispatches a PEI module.
638 # This PCD is used to tune PEI phase performance to reduce the search image time.
639 # It can be set according to the generated image section type.<BR><BR>
640 # TRUE - PeiCore will first search TE section from PEIM to load the image, if TE section is not found, then PeiCore will search PE section.<BR>
641 # FALSE - PeiCore will first search PE section from PEIM to load the image.<BR>
642 # @Prompt PeiCore search TE section first.
643 gEfiMdeModulePkgTokenSpaceGuid.PcdPeiCoreImageLoaderSearchTeSectionFirst|TRUE|BOOLEAN|0x00010044
644
645 ## Indicates if to turn off the support of legacy usb. So legacy usb device driver can not make use of SMI
646 # interrupt to access usb device in the case of absence of usb stack.
647 # DUET platform requires the token to be TRUE.<BR><BR>
648 # TRUE - Turn off usb legacy support.<BR>
649 # FALSE - Does not turn off usb legacy support.<BR>
650 # @Prompt Turn off USB legacy support.
651 gEfiMdeModulePkgTokenSpaceGuid.PcdTurnOffUsbLegacySupport|FALSE|BOOLEAN|0x00010047
652
653 ## Indicates if HiiImageProtocol will be installed.
654 # FALSE is for size reduction.<BR><BR>
655 # TRUE - Installs HiiImageProtocol.<BR>
656 # FALSE - Does not install HiiImageProtocol.<BR>
657 # @Prompt Enable HII image support.
658 gEfiMdeModulePkgTokenSpaceGuid.PcdSupportHiiImageProtocol|TRUE|BOOLEAN|0x00010100
659
660 ## Indicates if USB KeyBoard Driver disables the default keyboard layout.
661 # The default keyboard layout serves as the backup when no keyboard layout can be retrieved
662 # from HII database.<BR><BR>
663 # TRUE - USB KeyBoard Driver will disable the default keyboard layout.<BR>
664 # FALSE - USB KeyBoard Driver will not disable the default keyboard layout.<BR>
665 # @Prompt Disable default keyboard layout in USB KeyBoard Driver.
666 gEfiMdeModulePkgTokenSpaceGuid.PcdDisableDefaultKeyboardLayoutInUsbKbDriver|FALSE|BOOLEAN|0x00010200
667
668 ## Indicates if backward compatibility to Framework HII and Framework FvHob is supported.<BR><BR>
669 # TRUE - Setup Browser supports GUID opcodes generated from Framework HII VFR file by VFR compiler.
670 # the PeiCore will handle the framework FvHob and install FvInfo PPI for it.<BR>
671 # FALSE - Setup Browser doesn't support GUID opcodes generated from Framework HII VFR file by VFR compiler.
672 # the PeiCore will not handle the framework FvHob and install FvInfo PPI for it.<BR>
673 # @Prompt Enable framework backward compatibility support.
674 gEfiMdeModulePkgTokenSpaceGuid.PcdFrameworkCompatibilitySupport|FALSE|BOOLEAN|0x00012009
675
676 ## Indicates if HelloWorld Application will print the verbose information.
677 # This PCD is a sample to explain FeatureFlag PCD usage.<BR><BR>
678 # TRUE - HelloWorld Application will print the verbose information.<BR>
679 # FALSE - HelloWorld Application will not print the verbose information.<BR>
680 # @Prompt Enable HelloWorld print.
681 gEfiMdeModulePkgTokenSpaceGuid.PcdHelloWorldPrintEnable|TRUE|BOOLEAN|0x0001200a
682
683 ## Indicates if FULL FTW protocol services (total six APIs) will be produced.<BR><BR>
684 # TRUE - Produces FULL FTW protocol services (total six APIs).<BR>
685 # FALSE - Only FTW Write service is available.<BR>
686 # @Prompt Enable FULL FTW services.
687 gEfiMdeModulePkgTokenSpaceGuid.PcdFullFtwServiceEnable|TRUE|BOOLEAN|0x0001200b
688
689 ## Indicates if DXE IPL supports the UEFI decompression algorithm.<BR><BR>
690 # TRUE - DXE IPL will support UEFI decompression.<BR>
691 # FALSE - DXE IPL will not support UEFI decompression to save space.<BR>
692 # @Prompt Enable UEFI decompression support in DXE IPL.
693 gEfiMdeModulePkgTokenSpaceGuid.PcdDxeIplSupportUefiDecompress|TRUE|BOOLEAN|0x0001200c
694
695 ## Indicates if PciBus driver supports the hot plug device.<BR><BR>
696 # TRUE - PciBus driver supports the hot plug device.<BR>
697 # FALSE - PciBus driver doesn't support the hot plug device.<BR>
698 # @Prompt Enable PciBus hot plug device support.
699 gEfiMdeModulePkgTokenSpaceGuid.PcdPciBusHotplugDeviceSupport|TRUE|BOOLEAN|0x0001003d
700
701 ## Indicates if the PciBus driver probes non-standard, such as 2K/1K/512, granularity for PCI to PCI bridge I/O window.<BR><BR>
702 # TRUE - PciBus driver probes non-standard granularity for PCI to PCI bridge I/O window.<BR>
703 # FALSE - PciBus driver doesn't probe non-standard granularity for PCI to PCI bridge I/O window.<BR>
704 # @Prompt Enable PCI bridge IO alignment probe.
705 gEfiMdeModulePkgTokenSpaceGuid.PcdPciBridgeIoAlignmentProbe|FALSE|BOOLEAN|0x0001004e
706
707 ## Indicates if StatusCode is reported via Serial port.<BR><BR>
708 # TRUE - Reports StatusCode via Serial port.<BR>
709 # FALSE - Does not report StatusCode via Serial port.<BR>
710 # @Prompt Enable StatusCode via Serial port.
711 gEfiMdeModulePkgTokenSpaceGuid.PcdStatusCodeUseSerial|TRUE|BOOLEAN|0x00010022
712
713 ## Indicates if StatusCode is stored in memory.
714 # The memory is boot time memory in PEI Phase and is runtime memory in DXE Phase.<BR><BR>
715 # TRUE - Stores StatusCode in memory.<BR>
716 # FALSE - Does not store StatusCode in memory.<BR>
717 # @Prompt Enable StatusCode via memory.
718 gEfiMdeModulePkgTokenSpaceGuid.PcdStatusCodeUseMemory|FALSE|BOOLEAN|0x00010023
719
720 ## Indicates if PEI phase StatusCode will be replayed in DXE phase.<BR><BR>
721 # TRUE - Replays PEI phase StatusCode in DXE phased.<BR>
722 # FALSE - Does not replay PEI phase StatusCode in DXE phase.<BR>
723 # @Prompt Enable PEI StatusCode replay in DXE phase
724 gEfiMdeModulePkgTokenSpaceGuid.PcdStatusCodeReplayIn|FALSE|BOOLEAN|0x0001002d
725
726 ## Indicates if ACPI SDT protocol will be installed.<BR><BR>
727 # TRUE - Installs ACPI SDT protocol.<BR>
728 # FALSE - Does not install ACPI SDT protocol.<BR>
729 # @Prompt Enable ACPI SDT support.
730 gEfiMdeModulePkgTokenSpaceGuid.PcdInstallAcpiSdtProtocol|FALSE|BOOLEAN|0x0001004d
731
732 ## Indicates if the unaligned I/O, MMIO, and PCI Configuration cycles through the PCI I/O Protocol are enabled.
733 # The default value for this PCD is false to disable support for unaligned PCI I/O Protocol requests.<BR><BR>
734 # TRUE - Enables the unaligned I/O, MMIO, and PCI Configuration cycles through the PCI I/O Protocol.<BR>
735 # FALSE - Disables the unaligned I/O, MMIO, and PCI Configuration cycles through the PCI I/O Protocol.<BR>
736 # @Prompt Enable unaligned PCI I/O support.
737 gEfiMdeModulePkgTokenSpaceGuid.PcdUnalignedPciIoEnable|FALSE|BOOLEAN|0x0001003e
738
739 ## Indicates if TEXT statement is always set to GrayOut statement in HII Form Browser.<BR><BR>
740 # TRUE - TEXT statement will always be set to GrayOut.<BR>
741 # FALSE - TEXT statement will be set to GrayOut only when GrayOut condition is TRUE.<BR>
742 # @Prompt Always GrayOut TEXT statement.
743 gEfiMdeModulePkgTokenSpaceGuid.PcdBrowserGrayOutTextStatement|FALSE|BOOLEAN|0x0001004f
744
745 ## Indicates if unselectable menu should be gray out in HII Form Browser.<BR><BR>
746 # TRUE - The unselectable menu will be set to GrayOut.<BR>
747 # FALSE - The menu will be show as normal menu entry even if it is not selectable.<BR>
748 # @Prompt GrayOut read only menu.
749 gEfiMdeModulePkgTokenSpaceGuid.PcdBrowerGrayOutReadOnlyMenu|FALSE|BOOLEAN|0x00010070
750
751 ## Indicates if recovery from IDE disk will be supported.<BR><BR>
752 # TRUE - Supports recovery from IDE disk.<BR>
753 # FALSE - Does not support recovery from IDE disk.<BR>
754 # @Prompt Enable recovery on IDE disk.
755 gEfiMdeModulePkgTokenSpaceGuid.PcdRecoveryOnIdeDisk|TRUE|BOOLEAN|0x00010060
756
757 ## Indicates if recovery from FAT floppy disk will be supported.<BR><BR>
758 # TRUE - Supports recovery from FAT floppy disk.<BR>
759 # FALSE - Does not support recovery from FAT floppy disk.<BR>
760 # @Prompt Enable recovery on FAT floppy disk.
761 gEfiMdeModulePkgTokenSpaceGuid.PcdRecoveryOnFatFloppyDisk|TRUE|BOOLEAN|0x00010061
762
763 ## Indicates if recovery from data CD will be supported.<BR><BR>
764 # TRUE - Supports recovery from data CD.<BR>
765 # FALSE - Does not support recovery from data CD.<BR>
766 # @Prompt Enable recovery on data CD.
767 gEfiMdeModulePkgTokenSpaceGuid.PcdRecoveryOnDataCD|TRUE|BOOLEAN|0x00010062
768
769 ## Indicates if recovery from FAT USB disk will be supported.<BR><BR>
770 # TRUE - Supports recovery from USB disk.<BR>
771 # FALSE - Does not support recovery from USB disk.<BR>
772 # @Prompt Enable recovery on FAT USB disk.
773 gEfiMdeModulePkgTokenSpaceGuid.PcdRecoveryOnFatUsbDisk|TRUE|BOOLEAN|0x00010063
774
775 ## Indicates if S3 performance data will be supported in ACPI FPDT table.<BR><BR>
776 # TRUE - S3 performance data will be supported in ACPI FPDT table.<BR>
777 # FALSE - S3 performance data will not be supported in ACPI FPDT table.<BR>
778 # @Prompt Enable S3 performance data support.
779 gEfiMdeModulePkgTokenSpaceGuid.PcdFirmwarePerformanceDataTableS3Support|TRUE|BOOLEAN|0x00010064
780
781 ## Indicates if PS2 keyboard does a extended verification during start.
782 # Add this PCD mainly consider the use case of simulator. This PCD maybe set to FALSE for
783 # Extended verification will take some performance. It can be set to FALSE for boot performance.<BR><BR>
784 # TRUE - Turn on PS2 keyboard extended verification.<BR>
785 # FALSE - Turn off PS2 keyboard extended verification.<BR>
786 # @Prompt Turn on PS2 Keyboard Extended Verification
787 gEfiMdeModulePkgTokenSpaceGuid.PcdPs2KbdExtendedVerification|TRUE|BOOLEAN|0x00010072
788
789 ## Indicates if Serial device uses half hand shake.<BR><BR>
790 # TRUE - Serial device uses half hand shake.<BR>
791 # FALSE - Serial device doesn't use half hand shake.<BR>
792 # @Prompt Enable Serial device Half Hand Shake
793 gEfiMdeModulePkgTokenSpaceGuid.PcdSerialUseHalfHandshake|FALSE|BOOLEAN|0x00010073
794
795 ## Indicates if HII data and configuration has been exported.<BR><BR>
796 # Add this PCD mainly consider the use case of simulator. This PCD maybe set to FALSE for
797 # simulator platform because the performance cost for this feature.
798 # TRUE - Export HII data and configuration data.<BR>
799 # FALSE - Does not export HII data and configuration.<BR>
800 # @Prompt Enable export HII data and configuration to be used in OS runtime.
801 gEfiMdeModulePkgTokenSpaceGuid.PcdHiiOsRuntimeSupport|TRUE|BOOLEAN|0x00010074
802
803 ## Indicates if PS2 mouse does a extended verification during start.
804 # Extended verification will take some performance. It can be set to FALSE for boot performance.<BR><BR>
805 # TRUE - Turn on PS2 mouse extended verification. <BR>
806 # FALSE - Turn off PS2 mouse extended verification. <BR>
807 # @Prompt Turn on PS2 Mouse Extended Verification
808 gEfiMdeModulePkgTokenSpaceGuid.PcdPs2MouseExtendedVerification|TRUE|BOOLEAN|0x00010075
809
810 ## Indicates whether 64-bit PCI MMIO BARs should degrade to 32-bit in the presence of an option ROM
811 # On X64 platforms, Option ROMs may contain code that executes in the context of a legacy BIOS (CSM),
812 # which requires that all PCI MMIO BARs are located below 4 GB
813 # TRUE - All PCI MMIO BARs of a device will be located below 4 GB if it has an option ROM
814 # FALSE - PCI MMIO BARs of a device may be located above 4 GB even if it has an option ROM
815 # @Prompt Degrade 64-bit PCI MMIO BARs for legacy BIOS option ROMs
816 gEfiMdeModulePkgTokenSpaceGuid.PcdPciDegradeResourceForOptionRom|TRUE|BOOLEAN|0x0001003a
817
818 [PcdsFeatureFlag.IA32, PcdsFeatureFlag.ARM, PcdsFeatureFlag.AARCH64]
819 gEfiMdeModulePkgTokenSpaceGuid.PcdPciDegradeResourceForOptionRom|FALSE|BOOLEAN|0x0001003a
820
821 [PcdsFeatureFlag.IA32, PcdsFeatureFlag.X64]
822 ## Indicates if DxeIpl should switch to long mode to enter DXE phase.
823 # It is assumed that 64-bit DxeCore is built in firmware if it is true; otherwise 32-bit DxeCore
824 # is built in firmware.<BR><BR>
825 # TRUE - DxeIpl will load a 64-bit DxeCore and switch to long mode to hand over to DxeCore.<BR>
826 # FALSE - DxeIpl will load a 32-bit DxeCore and perform stack switch to hand over to DxeCore.<BR>
827 # @Prompt DxeIpl switch to long mode.
828 gEfiMdeModulePkgTokenSpaceGuid.PcdDxeIplSwitchToLongMode|TRUE|BOOLEAN|0x0001003b
829
830 ## Indicates if DxeIpl should rebuild page tables. This flag only
831 # makes sense in the case where the DxeIpl and the DxeCore are both X64.<BR><BR>
832 # TRUE - DxeIpl will rebuild page tables.<BR>
833 # FALSE - DxeIpl will not rebuild page tables.<BR>
834 # @Prompt DxeIpl rebuild page tables.
835 gEfiMdeModulePkgTokenSpaceGuid.PcdDxeIplBuildPageTables|TRUE|BOOLEAN|0x0001003c
836
837 [PcdsFixedAtBuild]
838 ## Flag of enabling/disabling the feature of Loading Module at Fixed Address.<BR><BR>
839 # 0xFFFFFFFFFFFFFFFF: Enable the feature as fixed offset to TOLM.<BR>
840 # 0: Disable the feature.<BR>
841 # Other Value: Enable the feature as fixed absolute address, and the value is the top memory address.<BR>
842 # @Prompt Enable LMFA feature.
843 # @Expression 0x80000001 | (gEfiMdeModulePkgTokenSpaceGuid.PcdLoadModuleAtFixAddressEnable == 0xFFFFFFFFFFFFFFFF || gEfiMdeModulePkgTokenSpaceGuid.PcdLoadModuleAtFixAddressEnable <= 0x0FFFFFFFFFFFFFFF)
844 gEfiMdeModulePkgTokenSpaceGuid.PcdLoadModuleAtFixAddressEnable|0|UINT64|0x30001015
845
846 ## Progress Code for OS Loader LoadImage start.<BR><BR>
847 # PROGRESS_CODE_OS_LOADER_LOAD = (EFI_SOFTWARE_DXE_BS_DRIVER | (EFI_OEM_SPECIFIC | 0x00000000)) = 0x03058000<BR>
848 # @Prompt Progress Code for OS Loader LoadImage start.
849 # @ValidList 0x80000003 | 0x03058000
850 gEfiMdeModulePkgTokenSpaceGuid.PcdProgressCodeOsLoaderLoad|0x03058000|UINT32|0x30001030
851
852 ## Progress Code for OS Loader StartImage start.<BR><BR>
853 # PROGRESS_CODE_OS_LOADER_START = (EFI_SOFTWARE_DXE_BS_DRIVER | (EFI_OEM_SPECIFIC | 0x00000001)) = 0x03058001<BR>
854 # @Prompt Progress Code for OS Loader StartImage start.
855 # @ValidList 0x80000003 | 0x03058001
856 gEfiMdeModulePkgTokenSpaceGuid.PcdProgressCodeOsLoaderStart|0x03058001|UINT32|0x30001031
857
858 ## Progress Code for S3 Suspend start.<BR><BR>
859 # PROGRESS_CODE_S3_SUSPEND_START = (EFI_SOFTWARE_SMM_DRIVER | (EFI_OEM_SPECIFIC | 0x00000000)) = 0x03078000<BR>
860 # @Prompt Progress Code for S3 Suspend start.
861 # @ValidList 0x80000003 | 0x03078000
862 gEfiMdeModulePkgTokenSpaceGuid.PcdProgressCodeS3SuspendStart|0x03078000|UINT32|0x30001032
863
864 ## Progress Code for S3 Suspend end.<BR><BR>
865 # PROGRESS_CODE_S3_SUSPEND_END = (EFI_SOFTWARE_SMM_DRIVER | (EFI_OEM_SPECIFIC | 0x00000001)) = 0x03078001<BR>
866 # @Prompt Progress Code for S3 Suspend end.
867 # @ValidList 0x80000003 | 0x03078001
868 gEfiMdeModulePkgTokenSpaceGuid.PcdProgressCodeS3SuspendEnd|0x03078001|UINT32|0x30001033
869
870 ## Error Code for SetVariable failure.<BR><BR>
871 # EDKII_ERROR_CODE_SET_VARIABLE = (EFI_SOFTWARE_DXE_BS_DRIVER | (EFI_OEM_SPECIFIC | 0x00000002)) = 0x03058002<BR>
872 # @Prompt Error Code for SetVariable failure.
873 # @ValidList 0x80000006 | 0x03058002
874 gEfiMdeModulePkgTokenSpaceGuid.PcdErrorCodeSetVariable|0x03058002|UINT32|0x30001040
875
876 ## Mask to control the NULL address detection in code for different phases.
877 # If enabled, accessing NULL address in UEFI or SMM code can be caught.<BR><BR>
878 # BIT0 - Enable NULL pointer detection for UEFI.<BR>
879 # BIT1 - Enable NULL pointer detection for SMM.<BR>
880 # BIT2..6 - Reserved for future uses.<BR>
881 # BIT7 - Disable NULL pointer detection just after EndOfDxe. <BR>
882 # This is a workaround for those unsolvable NULL access issues in
883 # OptionROM, boot loader, etc. It can also help to avoid unnecessary
884 # exception caused by legacy memory (0-4095) access after EndOfDxe,
885 # such as Windows 7 boot on Qemu.<BR>
886 # @Prompt Enable NULL address detection.
887 gEfiMdeModulePkgTokenSpaceGuid.PcdNullPointerDetectionPropertyMask|0x0|UINT8|0x30001050
888
889 ## Init Value in Temp Stack to be shared between SEC and PEI_CORE
890 # SEC fills the full temp stack with this values. When switch stack, PeiCore can check
891 # this value in the temp stack to know how many stack has been used.
892 # @Prompt Init Value in Temp Stack
893 gEfiMdeModulePkgTokenSpaceGuid.PcdInitValueInTempStack|0x5AA55AA5|UINT32|0x30001051
894
895 ## Indicates which type allocation need guard page.
896 # Below is bit mask for this PCD: (Order is same as UEFI spec)<BR>
897 # EfiReservedMemoryType 0x0000000000000001<BR>
898 # EfiLoaderCode 0x0000000000000002<BR>
899 # EfiLoaderData 0x0000000000000004<BR>
900 # EfiBootServicesCode 0x0000000000000008<BR>
901 # EfiBootServicesData 0x0000000000000010<BR>
902 # EfiRuntimeServicesCode 0x0000000000000020<BR>
903 # EfiRuntimeServicesData 0x0000000000000040<BR>
904 # EfiConventionalMemory 0x0000000000000080<BR>
905 # EfiUnusableMemory 0x0000000000000100<BR>
906 # EfiACPIReclaimMemory 0x0000000000000200<BR>
907 # EfiACPIMemoryNVS 0x0000000000000400<BR>
908 # EfiMemoryMappedIO 0x0000000000000800<BR>
909 # EfiMemoryMappedIOPortSpace 0x0000000000001000<BR>
910 # EfiPalCode 0x0000000000002000<BR>
911 # EfiPersistentMemory 0x0000000000004000<BR>
912 # OEM Reserved 0x4000000000000000<BR>
913 # OS Reserved 0x8000000000000000<BR>
914 # e.g. LoaderCode+LoaderData+BootServicesCode+BootServicesData are needed, 0x1E should be used.<BR>
915 # @Prompt The memory type mask for Page Guard.
916 gEfiMdeModulePkgTokenSpaceGuid.PcdHeapGuardPageType|0x0|UINT64|0x30001052
917
918 ## Indicates which type allocation need guard page.
919 # Below is bit mask for this PCD: (Order is same as UEFI spec)<BR>
920 # EfiReservedMemoryType 0x0000000000000001<BR>
921 # EfiLoaderCode 0x0000000000000002<BR>
922 # EfiLoaderData 0x0000000000000004<BR>
923 # EfiBootServicesCode 0x0000000000000008<BR>
924 # EfiBootServicesData 0x0000000000000010<BR>
925 # EfiRuntimeServicesCode 0x0000000000000020<BR>
926 # EfiRuntimeServicesData 0x0000000000000040<BR>
927 # EfiConventionalMemory 0x0000000000000080<BR>
928 # EfiUnusableMemory 0x0000000000000100<BR>
929 # EfiACPIReclaimMemory 0x0000000000000200<BR>
930 # EfiACPIMemoryNVS 0x0000000000000400<BR>
931 # EfiMemoryMappedIO 0x0000000000000800<BR>
932 # EfiMemoryMappedIOPortSpace 0x0000000000001000<BR>
933 # EfiPalCode 0x0000000000002000<BR>
934 # EfiPersistentMemory 0x0000000000004000<BR>
935 # OEM Reserved 0x4000000000000000<BR>
936 # OS Reserved 0x8000000000000000<BR>
937 # e.g. LoaderCode+LoaderData+BootServicesCode+BootServicesData are needed, 0x1E should be used.<BR>
938 # @Prompt The memory type mask for Pool Guard.
939 gEfiMdeModulePkgTokenSpaceGuid.PcdHeapGuardPoolType|0x0|UINT64|0x30001053
940
941 ## This mask is to control Heap Guard behavior.
942 # BIT0 - Enable UEFI page guard.<BR>
943 # BIT1 - Enable UEFI pool guard.<BR>
944 # BIT2 - Enable SMM page guard.<BR>
945 # BIT3 - Enable SMM pool guard.<BR>
946 # BIT7 - The direction of Guard Page for Pool Guard.
947 # 0 - The returned pool is adjacent to the bottom guard page.<BR>
948 # 1 - The returned pool is adjacent to the top guard page.<BR>
949 # @Prompt The Heap Guard feature mask
950 gEfiMdeModulePkgTokenSpaceGuid.PcdHeapGuardPropertyMask|0x0|UINT8|0x30001054
951
952 [PcdsFixedAtBuild, PcdsPatchableInModule]
953 ## Dynamic type PCD can be registered callback function for Pcd setting action.
954 # PcdMaxPeiPcdCallBackNumberPerPcdEntry indicates the maximum number of callback function
955 # for a dynamic PCD used in PEI phase.
956 # @Prompt Max PEI PCD callback number per PCD entry.
957 gEfiMdeModulePkgTokenSpaceGuid.PcdMaxPeiPcdCallBackNumberPerPcdEntry|0x08|UINT32|0x0001000f
958
959 ## VPD type PCD allows a developer to point to an absolute physical address PcdVpdBaseAddress
960 # to store PCD value.
961 # @Prompt VPD base address.
962 gEfiMdeModulePkgTokenSpaceGuid.PcdVpdBaseAddress|0x0|UINT32|0x00010010
963
964 ## Maximum number of FV is supported by PeiCore's dispatching.
965 # @Prompt Maximum number of FV supported by PeiCore.
966 gEfiMdeModulePkgTokenSpaceGuid.PcdPeiCoreMaxFvSupported|6|UINT32|0x00010030
967
968 ## Maximum File count in every FV is supported by PeiCore's dispatching.
969 # PeiCore supported File type includes PEIM, Combined PEIM and FV.
970 # @Prompt Maximum File count per FV supported by PeiCore.
971 gEfiMdeModulePkgTokenSpaceGuid.PcdPeiCoreMaxPeimPerFv|32|UINT32|0x00010031
972
973 ## Maximum stack size for PeiCore.
974 # @Prompt Maximum stack size for PeiCore.
975 gEfiMdeModulePkgTokenSpaceGuid.PcdPeiCoreMaxPeiStackSize|0x20000|UINT32|0x00010032
976
977 ## Maximum PPI count is supported by PeiCore's PPI database.
978 # @Prompt Maximum PPI count supported by PeiCore.
979 gEfiMdeModulePkgTokenSpaceGuid.PcdPeiCoreMaxPpiSupported|64|UINT32|0x00010033
980
981 ## The maximum size of a single non-HwErr type variable.
982 # @Prompt Maximum variable size.
983 gEfiMdeModulePkgTokenSpaceGuid.PcdMaxVariableSize|0x400|UINT32|0x30000003
984
985 ## The maximum size of a single authenticated variable.
986 # The value is 0 as default for compatibility that maximum authenticated variable size is specified by PcdMaxVariableSize.
987 # @Prompt Maximum authenticated variable size.
988 gEfiMdeModulePkgTokenSpaceGuid.PcdMaxAuthVariableSize|0x00|UINT32|0x30000009
989
990 ## The maximum size of single hardware error record variable.<BR><BR>
991 # In IA32/X64 platforms, this value should be larger than 1KB.<BR>
992 # In IA64 platforms, this value should be larger than 128KB.<BR>
993 # @Prompt Maximum HwErr variable size.
994 gEfiMdeModulePkgTokenSpaceGuid.PcdMaxHardwareErrorVariableSize|0x8000|UINT32|0x30000004
995
996 ## The size of reserved HwErr variable space. Note that this value must be less than (PcdFlashNvStorageVariableSize - EFI_FIRMWARE_VOLUME_HEADER.HeaderLength - sizeof (VARIABLE_STORE_HEADER)).
997 # In EdkII implementation, HwErr type variable is stored with common non-volatile variables in the same NV region.
998 # so the platform integrator should ensure this value is less than (PcdFlashNvStorageVariableSize - EFI_FIRMWARE_VOLUME_HEADER.HeaderLength - sizeof (VARIABLE_STORE_HEADER)).
999 # this value is used to guarantee the space of HwErr type variable and not populated by common variable.
1000 # @Prompt HwErr variable storage size.
1001 gEfiMdeModulePkgTokenSpaceGuid.PcdHwErrStorageSize|0x0000|UINT32|0x30000006
1002
1003 ## The size of maximum user NV variable space.<BR><BR>
1004 # Note that this value must be less than (PcdFlashNvStorageVariableSize - EFI_FIRMWARE_VOLUME_HEADER.HeaderLength - sizeof (VARIABLE_STORE_HEADER) - PcdHwErrStorageSize).<BR>
1005 # If the value is 0, it means user variable share the same NV storage with system variable,
1006 # this is designed to keep the compatibility for the platform that does not allocate special region for user variable.<BR>
1007 # If the value is non-0, the below 4 types of variables will be regarded as System Variable after EndOfDxe, their property could be got by VarCheck protocol,
1008 # otherwise the variable will be regarded as user variable.<BR>
1009 # 1) UEFI defined variables (gEfiGlobalVariableGuid and gEfiImageSecurityDatabaseGuid(auth variable) variables at least).<BR>
1010 # 2) Variables managed by Variable driver internally.<BR>
1011 # 3) Variables need to be locked, they MUST be set by VariableLock protocol.<BR>
1012 # 4) Important variables during platform boot, their property SHOULD be set by VarCheck protocol.<BR>
1013 # The PCD is used to guarantee the space of system variable and not populated by user variable.<BR>
1014 # @Prompt Maximum user NV variable space size.
1015 gEfiMdeModulePkgTokenSpaceGuid.PcdMaxUserNvVariableSpaceSize|0x00|UINT32|0x00000009
1016
1017 ## The size of NV variable space reserved at UEFI boottime.<BR><BR>
1018 # Note that this value must be less than (PcdFlashNvStorageVariableSize - EFI_FIRMWARE_VOLUME_HEADER.HeaderLength - sizeof (VARIABLE_STORE_HEADER) - PcdHwErrStorageSize).<BR>
1019 # In EdkII implementation, variable driver can reserved some NV storage region for boottime settings.
1020 # So at UEFI runtime, the variable service consumer can not exhaust full NV storage region.<BR>
1021 # Then the common NV variable space size at boottime will be
1022 # (PcdFlashNvStorageVariableSize - EFI_FIRMWARE_VOLUME_HEADER.HeaderLength - sizeof (VARIABLE_STORE_HEADER) - PcdHwErrStorageSize),<BR>
1023 # and the common NV variable space size at runtime will be
1024 # (PcdFlashNvStorageVariableSize - EFI_FIRMWARE_VOLUME_HEADER.HeaderLength - sizeof (VARIABLE_STORE_HEADER) - PcdHwErrStorageSize) - PcdBoottimeReservedNvVariableSpaceSize.<BR>
1025 # @Prompt Boottime reserved NV variable space size.
1026 gEfiMdeModulePkgTokenSpaceGuid.PcdBoottimeReservedNvVariableSpaceSize|0x00|UINT32|0x30000007
1027
1028 ## Reclaim variable space at EndOfDxe.<BR><BR>
1029 # The value is FALSE as default for compatibility that variable driver tries to reclaim variable space at ReadyToBoot event.<BR>
1030 # If the value is set to TRUE, variable driver tries to reclaim variable space at EndOfDxe event.<BR>
1031 # @Prompt Reclaim variable space at EndOfDxe.
1032 gEfiMdeModulePkgTokenSpaceGuid.PcdReclaimVariableSpaceAtEndOfDxe|FALSE|BOOLEAN|0x30000008
1033
1034 ## The size of volatile buffer. This buffer is used to store VOLATILE attribute variables.
1035 # @Prompt Variable storage size.
1036 gEfiMdeModulePkgTokenSpaceGuid.PcdVariableStoreSize|0x10000|UINT32|0x30000005
1037
1038 ## FFS filename to find the ACPI tables.
1039 # @Prompt FFS name of ACPI tables storage.
1040 gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiTableStorageFile|{ 0x25, 0x4e, 0x37, 0x7e, 0x01, 0x8e, 0xee, 0x4f, 0x87, 0xf2, 0x39, 0xc, 0x23, 0xc6, 0x6, 0xcd }|VOID*|0x30000016
1041
1042 ## FFS filename to find the capsule coalesce image.
1043 # @Prompt FFS name of capsule coalesce image.
1044 gEfiMdeModulePkgTokenSpaceGuid.PcdCapsuleCoalesceFile|{ 0xA6, 0xE4, 0xFD, 0xF7, 0x4C, 0x29, 0x3c, 0x49, 0xB5, 0x0F, 0x97, 0x34, 0x55, 0x3B, 0xB7, 0x57 }|VOID*|0x30000017
1045
1046 ## Maximum number of performance log entries during PEI phase.
1047 # Use PcdMaxPeiPerformanceLogEntries16 if the number of entries required is
1048 # more than 255.
1049 # @Prompt Maximum number of PEI performance log entries.
1050 gEfiMdeModulePkgTokenSpaceGuid.PcdMaxPeiPerformanceLogEntries|40|UINT8|0x0001002f
1051
1052 ## Maximum number of performance log entries during PEI phase.
1053 # If set to 0, then PcdMaxPeiPerformanceLogEntries determines the number of
1054 # entries. If greater than 0, then this PCD determines the number of entries,
1055 # and PcdMaxPeiPerformanceLogEntries is ignored.
1056 # @Prompt Maximum number of PEI performance log entries.
1057 gEfiMdeModulePkgTokenSpaceGuid.PcdMaxPeiPerformanceLogEntries16|0|UINT16|0x00010035
1058
1059 ## RTC Update Timeout Value(microsecond).
1060 # @Prompt RTC Update Timeout Value.
1061 gEfiMdeModulePkgTokenSpaceGuid.PcdRealTimeClockUpdateTimeout|100000|UINT32|0x00010034
1062
1063 ## Indicates the 16550 serial port registers are in MMIO space, or in I/O space. Default is I/O space.<BR><BR>
1064 # TRUE - 16550 serial port registers are in MMIO space.<BR>
1065 # FALSE - 16550 serial port registers are in I/O space.<BR>
1066 # @Prompt Serial port registers use MMIO.
1067 gEfiMdeModulePkgTokenSpaceGuid.PcdSerialUseMmio|FALSE|BOOLEAN|0x00020000
1068
1069 ## Indicates if the 16550 serial port hardware flow control will be enabled. Default is FALSE.<BR><BR>
1070 # TRUE - 16550 serial port hardware flow control will be enabled.<BR>
1071 # FALSE - 16550 serial port hardware flow control will be disabled.<BR>
1072 # @Prompt Enable serial port hardware flow control.
1073 gEfiMdeModulePkgTokenSpaceGuid.PcdSerialUseHardwareFlowControl|FALSE|BOOLEAN|0x00020001
1074
1075 ## Indicates if the 16550 serial Tx operations will be blocked if DSR is not asserted (no cable). Default is FALSE.
1076 # This PCD is ignored if PcdSerialUseHardwareFlowControl is FALSE.<BR><BR>
1077 # TRUE - 16550 serial Tx operations will be blocked if DSR is not asserted.<BR>
1078 # FALSE - 16550 serial Tx operations will not be blocked if DSR is not asserted.<BR>
1079 # @Prompt Enable serial port cable detetion.
1080 gEfiMdeModulePkgTokenSpaceGuid.PcdSerialDetectCable|FALSE|BOOLEAN|0x00020006
1081
1082 ## Base address of 16550 serial port registers in MMIO or I/O space. Default is 0x3F8.
1083 # @Prompt Base address of serial port registers.
1084 gEfiMdeModulePkgTokenSpaceGuid.PcdSerialRegisterBase|0x03F8|UINT64|0x00020002
1085
1086 ## Baud rate for the 16550 serial port. Default is 115200 baud.
1087 # @Prompt Baud rate for serial port.
1088 # @ValidList 0x80000001 | 921600, 460800, 230400, 115200, 57600, 38400, 19200, 9600, 7200, 4800, 3600, 2400, 2000, 1800, 1200, 600, 300, 150, 134, 110, 75, 50
1089 gEfiMdeModulePkgTokenSpaceGuid.PcdSerialBaudRate|115200|UINT32|0x00020003
1090
1091 ## Line Control Register (LCR) for the 16550 serial port. This encodes data bits, parity, and stop bits.<BR><BR>
1092 # BIT1..BIT0 - Data bits. 00b = 5 bits, 01b = 6 bits, 10b = 7 bits, 11b = 8 bits<BR>
1093 # BIT2 - Stop Bits. 0 = 1 stop bit. 1 = 1.5 stop bits if 5 data bits selected, otherwise 2 stop bits.<BR>
1094 # BIT5..BIT3 - Parity. xx0b = No Parity, 001b = Odd Parity, 011b = Even Parity, 101b = Mark Parity, 111b=Stick Parity<BR>
1095 # BIT7..BIT6 - Reserved. Must be 0.<BR>
1096 #
1097 # Default is No Parity, 8 Data Bits, 1 Stop Bit.<BR>
1098 # @Prompt Serial port Line Control settings.
1099 # @Expression 0x80000002 | (gEfiMdeModulePkgTokenSpaceGuid.PcdSerialLineControl & 0xC0) == 0
1100 gEfiMdeModulePkgTokenSpaceGuid.PcdSerialLineControl|0x03|UINT8|0x00020004
1101
1102 ## FIFO Control Register (FCR) for the 16550 serial port.<BR><BR>
1103 # BIT0 - FIFO Enable. 0 = Disable FIFOs. 1 = Enable FIFOs.<BR>
1104 # BIT1 - Clear receive FIFO. 1 = Clear FIFO.<BR>
1105 # BIT2 - Clear transmit FIFO. 1 = Clear FIFO.<BR>
1106 # BIT4..BIT3 - Reserved. Must be 0.<BR>
1107 # BIT5 - Enable 64-byte FIFO. 0 = Disable 64-byte FIFO. 1 = Enable 64-byte FIFO<BR>
1108 # BIT7..BIT6 - Reserved. Must be 0.<BR>
1109 #
1110 # Default is to enable and clear all FIFOs.<BR>
1111 # @Prompt Serial port FIFO Control settings.
1112 # @Expression 0x80000002 | (gEfiMdeModulePkgTokenSpaceGuid.PcdSerialFifoControl & 0xD8) == 0
1113 gEfiMdeModulePkgTokenSpaceGuid.PcdSerialFifoControl|0x07|UINT8|0x00020005
1114
1115 ## This setting can override the default TFTP block size. A value of 0 computes
1116 # the default from MTU information. A non-zero value will be used as block size
1117 # in bytes.
1118 # @Prompt TFTP block size.
1119 gEfiMdeModulePkgTokenSpaceGuid.PcdTftpBlockSize|0x0|UINT64|0x30001026
1120
1121 ## Maximum address that the DXE Core will allocate the EFI_SYSTEM_TABLE_POINTER
1122 # structure. The default value for this PCD is 0, which means that the DXE Core
1123 # will allocate the buffer from the EFI_SYSTEM_TABLE_POINTER structure on a 4MB
1124 # boundary as close to the top of memory as feasible. If this PCD is set to a
1125 # value other than 0, then the DXE Core will first attempt to allocate the
1126 # EFI_SYSTEM_TABLE_POINTER structure on a 4MB boundary below the address specified
1127 # by this PCD, and if that allocation fails, retry the allocation on a 4MB
1128 # boundary as close to the top of memory as feasible.
1129 # @Prompt Maximum Efi System Table Pointer address.
1130 gEfiMdeModulePkgTokenSpaceGuid.PcdMaxEfiSystemTablePointerAddress|0x0|UINT64|0x30001027
1131
1132 ## Indicates if to shadow PEIM on S3 boot path after memory is ready.<BR><BR>
1133 # TRUE - Shadow PEIM on S3 boot path after memory is ready.<BR>
1134 # FALSE - Not shadow PEIM on S3 boot path after memory is ready.<BR>
1135 # @Prompt Shadow Peim On S3 Boot.
1136 gEfiMdeModulePkgTokenSpaceGuid.PcdShadowPeimOnS3Boot|FALSE|BOOLEAN|0x30001028
1137
1138 ## Indicates if to shadow PEIM and PeiCore after memory is ready.<BR><BR>
1139 # This PCD is used on other boot path except for S3 boot.
1140 # TRUE - Shadow PEIM and PeiCore after memory is ready.<BR>
1141 # FALSE - Not shadow PEIM after memory is ready.<BR>
1142 # @Prompt Shadow Peim and PeiCore on boot
1143 gEfiMdeModulePkgTokenSpaceGuid.PcdShadowPeimOnBoot|TRUE|BOOLEAN|0x30001029
1144
1145 ## The mask is used to control memory profile behavior.<BR><BR>
1146 # BIT0 - Enable UEFI memory profile.<BR>
1147 # BIT1 - Enable SMRAM profile.<BR>
1148 # BIT7 - Disable recording at the start.<BR>
1149 # @Prompt Memory Profile Property.
1150 # @Expression 0x80000002 | (gEfiMdeModulePkgTokenSpaceGuid.PcdMemoryProfilePropertyMask & 0x7C) == 0
1151 gEfiMdeModulePkgTokenSpaceGuid.PcdMemoryProfilePropertyMask|0x0|UINT8|0x30001041
1152
1153 ## The mask is used to control SmiHandlerProfile behavior.<BR><BR>
1154 # BIT0 - Enable SmiHandlerProfile.<BR>
1155 # @Prompt SmiHandlerProfile Property.
1156 # @Expression 0x80000002 | (gEfiMdeModulePkgTokenSpaceGuid.PcdSmiHandlerProfilePropertyMask & 0xFE) == 0
1157 gEfiMdeModulePkgTokenSpaceGuid.PcdSmiHandlerProfilePropertyMask|0|UINT8|0x00000108
1158
1159 ## This flag is to control which memory types of alloc info will be recorded by DxeCore & SmmCore.<BR><BR>
1160 # For SmmCore, only EfiRuntimeServicesCode and EfiRuntimeServicesData are valid.<BR>
1161 #
1162 # Below is bit mask for this PCD: (Order is same as UEFI spec)<BR>
1163 # EfiReservedMemoryType 0x0001<BR>
1164 # EfiLoaderCode 0x0002<BR>
1165 # EfiLoaderData 0x0004<BR>
1166 # EfiBootServicesCode 0x0008<BR>
1167 # EfiBootServicesData 0x0010<BR>
1168 # EfiRuntimeServicesCode 0x0020<BR>
1169 # EfiRuntimeServicesData 0x0040<BR>
1170 # EfiConventionalMemory 0x0080<BR>
1171 # EfiUnusableMemory 0x0100<BR>
1172 # EfiACPIReclaimMemory 0x0200<BR>
1173 # EfiACPIMemoryNVS 0x0400<BR>
1174 # EfiMemoryMappedIO 0x0800<BR>
1175 # EfiMemoryMappedIOPortSpace 0x1000<BR>
1176 # EfiPalCode 0x2000<BR>
1177 # EfiPersistentMemory 0x4000<BR>
1178 # OEM Reserved 0x4000000000000000<BR>
1179 # OS Reserved 0x8000000000000000<BR>
1180 #
1181 # e.g. Reserved+ACPINvs+ACPIReclaim+RuntimeCode+RuntimeData are needed, 0x661 should be used.<BR>
1182 #
1183 # @Prompt Memory profile memory type.
1184 gEfiMdeModulePkgTokenSpaceGuid.PcdMemoryProfileMemoryType|0x0|UINT64|0x30001042
1185
1186 ## This PCD is to control which drivers need memory profile data.<BR><BR>
1187 # For example:<BR>
1188 # One image only (Shell):<BR>
1189 # Header GUID<BR>
1190 # {0x04, 0x06, 0x14, 0x00, 0x83, 0xA5, 0x04, 0x7C, 0x3E, 0x9E, 0x1C, 0x4F, 0xAD, 0x65, 0xE0, 0x52, 0x68, 0xD0, 0xB4, 0xD1,<BR>
1191 # 0x7F, 0xFF, 0x04, 0x00}<BR>
1192 # Two or more images (Shell + WinNtSimpleFileSystem):<BR>
1193 # {0x04, 0x06, 0x14, 0x00, 0x83, 0xA5, 0x04, 0x7C, 0x3E, 0x9E, 0x1C, 0x4F, 0xAD, 0x65, 0xE0, 0x52, 0x68, 0xD0, 0xB4, 0xD1,<BR>
1194 # 0x7F, 0x01, 0x04, 0x00,<BR>
1195 # 0x04, 0x06, 0x14, 0x00, 0x8B, 0xE1, 0x25, 0x9C, 0xBA, 0x76, 0xDA, 0x43, 0xA1, 0x32, 0xDB, 0xB0, 0x99, 0x7C, 0xEF, 0xEF,<BR>
1196 # 0x7F, 0xFF, 0x04, 0x00}<BR>
1197 # @Prompt Memory profile driver path.
1198 gEfiMdeModulePkgTokenSpaceGuid.PcdMemoryProfileDriverPath|{0x0}|VOID*|0x00001043
1199
1200 ## Set image protection policy. The policy is bitwise.
1201 # If a bit is set, the image will be protected by DxeCore if it is aligned.
1202 # The code section becomes read-only, and the data section becomes non-executable.
1203 # If a bit is clear, the image will not be protected.<BR><BR>
1204 # BIT0 - Image from unknown device. <BR>
1205 # BIT1 - Image from firmware volume.<BR>
1206 # @Prompt Set image protection policy.
1207 # @ValidRange 0x80000002 | 0x00000000 - 0x0000001F
1208 gEfiMdeModulePkgTokenSpaceGuid.PcdImageProtectionPolicy|0x00000002|UINT32|0x00001047
1209
1210 ## Set DXE memory protection policy. The policy is bitwise.
1211 # If a bit is set, memory regions of the associated type will be mapped
1212 # non-executable.<BR><BR>
1213 #
1214 # Below is bit mask for this PCD: (Order is same as UEFI spec)<BR>
1215 # EfiReservedMemoryType 0x0001<BR>
1216 # EfiLoaderCode 0x0002<BR>
1217 # EfiLoaderData 0x0004<BR>
1218 # EfiBootServicesCode 0x0008<BR>
1219 # EfiBootServicesData 0x0010<BR>
1220 # EfiRuntimeServicesCode 0x0020<BR>
1221 # EfiRuntimeServicesData 0x0040<BR>
1222 # EfiConventionalMemory 0x0080<BR>
1223 # EfiUnusableMemory 0x0100<BR>
1224 # EfiACPIReclaimMemory 0x0200<BR>
1225 # EfiACPIMemoryNVS 0x0400<BR>
1226 # EfiMemoryMappedIO 0x0800<BR>
1227 # EfiMemoryMappedIOPortSpace 0x1000<BR>
1228 # EfiPalCode 0x2000<BR>
1229 # EfiPersistentMemory 0x4000<BR>
1230 # OEM Reserved 0x4000000000000000<BR>
1231 # OS Reserved 0x8000000000000000<BR>
1232 #
1233 # NOTE: User must NOT set NX protection for EfiLoaderCode / EfiBootServicesCode / EfiRuntimeServicesCode. <BR>
1234 # User MUST set the same NX protection for EfiBootServicesData and EfiConventionalMemory. <BR>
1235 #
1236 # e.g. 0x7FD5 can be used for all memory except Code. <BR>
1237 # e.g. 0x7BD4 can be used for all memory except Code and ACPINVS/Reserved. <BR>
1238 #
1239 # @Prompt Set DXE memory protection policy.
1240 gEfiMdeModulePkgTokenSpaceGuid.PcdDxeNxMemoryProtectionPolicy|0x0000000|UINT64|0x00001048
1241
1242 ## PCI Serial Device Info. It is an array of Device, Function, and Power Management
1243 # information that describes the path that contains zero or more PCI to PCI briges
1244 # followed by a PCI serial device. Each array entry is 4-bytes in length. The
1245 # first byte is the PCI Device Number, then second byte is the PCI Function Number,
1246 # and the last two bytes are the offset to the PCI power management capabilities
1247 # register used to manage the D0-D3 states. If a PCI power management capabilities
1248 # register is not present, then the last two bytes in the offset is set to 0. The
1249 # array is terminated by an array entry with a PCI Device Number of 0xFF. For a
1250 # non-PCI fixed address serial device, such as an ISA serial device, the value is 0xFF.
1251 # @Prompt Pci Serial Device Info
1252 gEfiMdeModulePkgTokenSpaceGuid.PcdSerialPciDeviceInfo|{0xFF}|VOID*|0x00010067
1253
1254 ## PCI Serial Parameters. It is an array of VendorID, DeviceID, ClockRate, Offset,
1255 # BarIndex, RegisterStride, ReceiveFifoDepth, TransmitFifoDepth information that
1256 # describes the parameters of special PCI serial devices.
1257 # Each array entry is 24-byte in length. The array is terminated
1258 # by an array entry with a PCI Vendor ID of 0xFFFF. If a platform only contains a
1259 # standard 16550 PCI serial device whose class code is 7/0/2, the value is 0xFFFF.
1260 # The C style structure is defined as below:<BR>
1261 # typedef struct {<BR>
1262 # UINT16 VendorId; ///< Vendor ID to match the PCI device. The value 0xFFFF terminates the list of entries.<BR>
1263 # UINT16 DeviceId; ///< Device ID to match the PCI device.<BR>
1264 # UINT32 ClockRate; ///< UART clock rate. Set to 0 for default clock rate of 1843200 Hz.<BR>
1265 # UINT64 Offset; ///< The byte offset into to the BAR.<BR>
1266 # UINT8 BarIndex; ///< Which BAR to get the UART base address.<BR>
1267 # UINT8 RegisterStride; ///< UART register stride in bytes. Set to 0 for default register stride of 1 byte.<BR>
1268 # UINT16 ReceiveFifoDepth; ///< UART receive FIFO depth in bytes. Set to 0 for a default FIFO depth of 16 bytes.<BR>
1269 # UINT16 TransmitFifoDepth; ///< UART transmit FIFO depth in bytes. Set to 0 for a default FIFO depth of 16 bytes.<BR>
1270 # UINT8 Reserved[2];<BR>
1271 # } PCI_SERIAL_PARAMETER;<BR>
1272 # It contains zero or more instances of the above structure.<BR>
1273 # For example, if a PCI device contains two UARTs, PcdPciSerialParameters needs
1274 # to contain two instances of the above structure, with the VendorId and DeviceId
1275 # equals to the Device ID and Vendor ID of the device; If the PCI device uses the
1276 # first two BARs to support two UARTs, BarIndex of first instance equals to 0 and
1277 # BarIndex of second one equals to 1; If the PCI device uses the first BAR to
1278 # support both UARTs, BarIndex of both instance equals to 0, Offset of first
1279 # instance equals to 0 and Offset of second one equals to a value bigger than or
1280 # equal to 8.<BR>
1281 # For certain UART whose register needs to be accessed in DWORD aligned address,
1282 # RegisterStride equals to 4.
1283 # @Prompt Pci Serial Parameters
1284 gEfiMdeModulePkgTokenSpaceGuid.PcdPciSerialParameters|{0xFF, 0xFF}|VOID*|0x00010071
1285
1286 ## Serial Port Extended Transmit FIFO Size. The default is 64 bytes.
1287 # @Prompt Serial Port Extended Transmit FIFO Size in Bytes
1288 gEfiMdeModulePkgTokenSpaceGuid.PcdSerialExtendedTxFifoSize|64|UINT32|0x00010068
1289
1290 ## This PCD points to the file name GUID of the BootManagerMenuApp
1291 # Platform can customize the PCD to point to different application for Boot Manager Menu
1292 # @Prompt Boot Manager Menu File
1293 gEfiMdeModulePkgTokenSpaceGuid.PcdBootManagerMenuFile|{ 0xdc, 0x5b, 0xc2, 0xee, 0xf2, 0x67, 0x95, 0x4d, 0xb1, 0xd5, 0xf8, 0x1b, 0x20, 0x39, 0xd1, 0x1d }|VOID*|0x0001006b
1294
1295 ## This PCD points to the formset GUID of the driver health management form
1296 # The form will be popped up by BDS core when there are Configuration Required driver health intances.
1297 # Platform can customize the PCD to point to different formset.
1298 # @Prompt Driver Health Management Form
1299 gEfiMdeModulePkgTokenSpaceGuid.PcdDriverHealthConfigureForm|{ 0xf4, 0xd9, 0x96, 0x42, 0xfc, 0xf6, 0xde, 0x4d, 0x86, 0x85, 0x8c, 0xe2, 0xd7, 0x9d, 0x90, 0xf0 }|VOID*|0x0001006c
1300
1301 ## The number of bytes between registers in serial device. The default is 1 byte.
1302 # @Prompt Serial Port Register Stride in Bytes
1303 gEfiMdeModulePkgTokenSpaceGuid.PcdSerialRegisterStride|1|UINT32|0x0001006d
1304
1305 ## This PCD to include the driver guid of VFR drivers for VarCheckHiiBin generation.<BR><BR>
1306 # Default is gZeroGuid that means no VFR driver will be parsed for VarCheckHiiBin generation.<BR>
1307 # If it is set to an all FFs GUID, it means all modules in all FVs will be parsed for VarCheckHiiBin generation.<BR>
1308 # @Prompt Driver guid array of VFR drivers for VarCheckHiiBin generation.
1309 gEfiMdeModulePkgTokenSpaceGuid.PcdVarCheckVfrDriverGuidArray|{ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }|VOID*|0x3000103A
1310
1311 ## Indicates which ACPI versions are targeted by the ACPI tables exposed to the OS
1312 # These values are aligned with the definitions in MdePkg/Include/Protocol/AcpiSystemDescriptionTable.h
1313 # BIT 1 - EFI_ACPI_TABLE_VERSION_1_0B.<BR>
1314 # BIT 2 - EFI_ACPI_TABLE_VERSION_2_0.<BR>
1315 # BIT 3 - EFI_ACPI_TABLE_VERSION_3_0.<BR>
1316 # BIT 4 - EFI_ACPI_TABLE_VERSION_4_0.<BR>
1317 # BIT 5 - EFI_ACPI_TABLE_VERSION_5_0.<BR>
1318 # @Prompt Exposed ACPI table versions.
1319 gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiExposedTableVersions|0x3E|UINT32|0x0001004c
1320
1321 ## This PCD defines the MAX repair count.
1322 # The default value is 0 that means infinite.
1323 # @Prompt MAX repair count
1324 gEfiMdeModulePkgTokenSpaceGuid.PcdMaxRepairCount|0x00|UINT32|0x00010076
1325
1326 ## Status Code for Capsule subclass definitions.<BR><BR>
1327 # EFI_OEM_SPECIFIC_SUBCLASS_CAPSULE = 0x00810000<BR>
1328 # NOTE: The default value of this PCD may collide with other OEM specific status codes.
1329 # Override the value of this PCD in the platform DSC file as needed.
1330 # @Prompt Status Code for Capsule subclass definitions
1331 # @ValidList 0x80000003 | 0x00810000
1332 gEfiMdeModulePkgTokenSpaceGuid.PcdStatusCodeSubClassCapsule|0x00810000|UINT32|0x00000100
1333
1334 ## Status Code for Capsule Process Begin.<BR><BR>
1335 # EFI_CAPSULE_PROCESS_CAPSULES_BEGIN = (EFI_OEM_SPECIFIC | 0x00000001) = 0x00008001<BR>
1336 # NOTE: The default value of this PCD may collide with other OEM specific status codes.
1337 # Override the value of this PCD in the platform DSC file as needed.
1338 # @Prompt Status Code for Capsule Process Begin
1339 # @ValidList 0x80000003 | 0x00008001
1340 gEfiMdeModulePkgTokenSpaceGuid.PcdCapsuleStatusCodeProcessCapsulesBegin|0x00008001|UINT32|0x00000101
1341
1342 ## Status Code for Capsule Process End.<BR><BR>
1343 # EFI_CAPSULE_PROCESS_CAPSULES_END = (EFI_OEM_SPECIFIC | 0x00000002) = 0x00008002<BR>
1344 # NOTE: The default value of this PCD may collide with other OEM specific status codes.
1345 # Override the value of this PCD in the platform DSC file as needed.
1346 # @Prompt Status Code for Capsule Process End
1347 # @ValidList 0x80000003 | 0x00008002
1348 gEfiMdeModulePkgTokenSpaceGuid.PcdCapsuleStatusCodeProcessCapsulesEnd|0x00008002|UINT32|0x00000102
1349
1350 ## Status Code for Capsule Process Updating Firmware.<BR><BR>
1351 # EFI_CAPSULE_UPDATING_FIRMWARE = (EFI_OEM_SPECIFIC | 0x00000003) = 0x00008003<BR>
1352 # NOTE: The default value of this PCD may collide with other OEM specific status codes.
1353 # Override the value of this PCD in the platform DSC file as needed.
1354 # @Prompt Status Code for Capsule Process Updating Firmware
1355 # @ValidList 0x80000003 | 0x00008003
1356 gEfiMdeModulePkgTokenSpaceGuid.PcdCapsuleStatusCodeUpdatingFirmware|0x00008003|UINT32|0x00000103
1357
1358 ## Status Code for Capsule Process Update Firmware Success.<BR><BR>
1359 # EFI_CAPSULE_UPDATE_FIRMWARE_SUCCESS = (EFI_OEM_SPECIFIC | 0x00000004) = 0x00008004<BR>
1360 # NOTE: The default value of this PCD may collide with other OEM specific status codes.
1361 # Override the value of this PCD in the platform DSC file as needed.
1362 # @Prompt Status Code for Capsule Process Update Firmware Success
1363 # @ValidList 0x80000003 | 0x00008004
1364 gEfiMdeModulePkgTokenSpaceGuid.PcdCapsuleStatusCodeUpdateFirmwareSuccess|0x00008004|UINT32|0x00000104
1365
1366 ## Status Code for Capsule Process Update Firmware Failed.<BR><BR>
1367 # EFI_CAPSULE_UPDATE_FIRMWARE_FAILED = (EFI_OEM_SPECIFIC | 0x00000005) = 0x00008005<BR>
1368 # NOTE: The default value of this PCD may collide with other OEM specific status codes.
1369 # Override the value of this PCD in the platform DSC file as needed.
1370 # @Prompt Status Code for Capsule Process Update Firmware Failed
1371 # @ValidList 0x80000003 | 0x00008005
1372 gEfiMdeModulePkgTokenSpaceGuid.PcdCapsuleStatusCodeUpdateFirmwareFailed|0x00008005|UINT32|0x00000105
1373
1374 ## Status Code for Capsule Resetting System.<BR><BR>
1375 # EFI_CAPSULE_RESETTING_SYSTEM = (EFI_OEM_SPECIFIC | 0x00000006) = 0x00008006<BR>
1376 # NOTE: The default value of this PCD may collide with other OEM specific status codes.
1377 # Override the value of this PCD in the platform DSC file as needed.
1378 # @Prompt Status Code for Capsule Resetting System
1379 # @ValidList 0x80000003 | 0x00008006
1380 gEfiMdeModulePkgTokenSpaceGuid.PcdCapsuleStatusCodeResettingSystem|0x00008006|UINT32|0x00000106
1381
1382 ## CapsuleMax value in capsule report variable.
1383 # @Prompt CapsuleMax value in capsule report variable.
1384 gEfiMdeModulePkgTokenSpaceGuid.PcdCapsuleMax|0xFFFF|UINT16|0x00000107
1385
1386 [PcdsPatchableInModule, PcdsDynamic, PcdsDynamicEx]
1387 ## This PCD defines the Console output row. The default value is 25 according to UEFI spec.
1388 # This PCD could be set to 0 then console output would be at max column and max row.
1389 # @Prompt Console output row.
1390 gEfiMdeModulePkgTokenSpaceGuid.PcdConOutRow|25|UINT32|0x40000006
1391
1392 ## This PCD defines the Console output column. The default value is 80 according to UEFI spec.
1393 # This PCD could be set to 0 then console output would be at max column and max row.
1394 # @Prompt Console output column.
1395 gEfiMdeModulePkgTokenSpaceGuid.PcdConOutColumn|80|UINT32|0x40000007
1396
1397 ## This PCD defines the video horizontal resolution.
1398 # If this PCD is set to 0 then video resolution would be at highest resolution.
1399 # @Prompt Video horizontal resolution.
1400 gEfiMdeModulePkgTokenSpaceGuid.PcdVideoHorizontalResolution|800|UINT32|0x40000009
1401
1402 ## This PCD defines the video vertical resolution.
1403 # If this PCD is set to 0 then video resolution would be at highest resolution.
1404 # @Prompt Video vertical resolution.
1405 gEfiMdeModulePkgTokenSpaceGuid.PcdVideoVerticalResolution|600|UINT32|0x4000000a
1406
1407 # The 4 PCDs below are used to specify the video resolution and text mode of text setup.
1408 # To make text setup work in this resolution, PcdVideoHorizontalResolution, PcdVideoVerticalResolution,
1409 # PcdConOutColumn and PcdConOutRow should be created as PcdsDynamic or PcdsDynamicEx in platform DSC file.
1410 # Then BDS setup will update these PCDs defined in MdeModulePkg.dec and reconnect console drivers
1411 # (GraphicsConsole, Terminal, Consplitter) to make the video resolution and text mode work
1412 # for text setup.
1413
1414 ## Specify the video horizontal resolution of text setup.
1415 # @Prompt Video Horizontal Resolution of Text Setup
1416 gEfiMdeModulePkgTokenSpaceGuid.PcdSetupVideoHorizontalResolution|800|UINT32|0x4000000b
1417
1418 ## Specify the video vertical resolution of text setup.
1419 # @Prompt Video Vertical Resolution of Text Setup
1420 gEfiMdeModulePkgTokenSpaceGuid.PcdSetupVideoVerticalResolution|600|UINT32|0x4000000c
1421
1422 ## Specify the console output column of text setup.
1423 # @Prompt Console Output Column of Text Setup
1424 gEfiMdeModulePkgTokenSpaceGuid.PcdSetupConOutColumn|80|UINT32|0x4000000d
1425
1426 ## Specify the console output row of text setup.
1427 # @Prompt Console Output Row of Text Setup
1428 gEfiMdeModulePkgTokenSpaceGuid.PcdSetupConOutRow|25|UINT32|0x4000000e
1429
1430 [PcdsFixedAtBuild, PcdsPatchableInModule, PcdsDynamic, PcdsDynamicEx]
1431 ## UART clock frequency is for the baud rate configuration.
1432 # @Prompt Serial Port Clock Rate.
1433 gEfiMdeModulePkgTokenSpaceGuid.PcdSerialClockRate|1843200|UINT32|0x00010066
1434
1435 ## This PCD points to the front page formset GUID
1436 # Compare the FormsetGuid or ClassGuid with this PCD value can detect whether in front page
1437 # @Prompt Front Page Formset.
1438 gEfiMdeModulePkgTokenSpaceGuid.PcdFrontPageFormSetGuid|{ 0xbc, 0x30, 0x0c, 0x9e,0x06, 0x3f, 0xa6, 0x4b, 0x82, 0x88, 0x9, 0x17, 0x9b, 0x85, 0x5d, 0xbe }|VOID*|0x0001006e
1439
1440 ## Base address of the NV variable range in flash device.
1441 # @Prompt Base address of flash NV variable range.
1442 gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableBase|0x0|UINT32|0x30000001
1443
1444 ## Size of the NV variable range. Note that this value should less than or equal to PcdFlashNvStorageFtwSpareSize.
1445 # The root cause is that variable driver will use FTW protocol to reclaim variable region.
1446 # If the length of variable region is larger than FTW spare size, it means the whole variable region can not
1447 # be reflushed through the manner of fault tolerant write.
1448 # @Prompt Size of flash NV variable range.
1449 gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableSize|0x0|UINT32|0x30000002
1450
1451 ## Base address of the FTW spare block range in flash device. Note that this value should be block size aligned.
1452 # @Prompt Base address of flash FTW spare block range.
1453 gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareBase|0x0|UINT32|0x30000013
1454
1455 ## Size of the FTW spare block range. Note that this value should larger than PcdFlashNvStorageVariableSize and block size aligned.
1456 # The root cause is that variable driver will use FTW protocol to reclaim variable region.
1457 # If the length of variable region is larger than FTW spare size, it means the whole variable region can not
1458 # be reflushed through the manner of fault tolerant write.
1459 # @Prompt Size of flash FTW spare block range.
1460 gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareSize|0x0|UINT32|0x30000014
1461
1462 ## Base address of the FTW working block range in flash device.
1463 # If PcdFlashNvStorageFtwWorkingSize is larger than one block size, this value should be block size aligned.
1464 # @Prompt Base address of flash FTW working block range.
1465 gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingBase|0x0|UINT32|0x30000010
1466
1467 ## Size of the FTW working block range.
1468 # If the value is less than one block size, the work space range should not span blocks.
1469 # If the value is larger than one block size, it should be block size aligned.
1470 # @Prompt Size of flash FTW working block range.
1471 gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingSize|0x0|UINT32|0x30000011
1472
1473 ## 64-bit Base address of the NV variable range in flash device.
1474 # @Prompt 64-bit Base address of flash NV variable range.
1475 gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableBase64|0x0|UINT64|0x80000001
1476
1477 ## 64-bit Base address of the FTW spare block range in flash device. Note that this value should be block size aligned.
1478 # @Prompt 64-bit Base address of flash FTW spare block range.
1479 gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareBase64|0x0|UINT64|0x80000013
1480
1481 ## 64-bit Base address of the FTW working block range in flash device.
1482 # If PcdFlashNvStorageFtwWorkingSize is larger than one block size, this value should be block size aligned.
1483 # @Prompt 64-bit Base address of flash FTW working block range.
1484 gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingBase64|0x0|UINT64|0x80000010
1485
1486 ## This PCD defines a reserved memory range for the EMU Variable driver's NV Variable Store.
1487 # The range is valid if non-zero. The memory range size must be PcdVariableStoreSize.
1488 # @Prompt Reserved memory range for EMU variable NV storage.
1489 gEfiMdeModulePkgTokenSpaceGuid.PcdEmuVariableNvStoreReserved|0|UINT64|0x40000008
1490
1491 ## This PCD defines the times to print hello world string.
1492 # This PCD is a sample to explain UINT32 PCD usage.
1493 # @Prompt HellowWorld print times.
1494 gEfiMdeModulePkgTokenSpaceGuid.PcdHelloWorldPrintTimes|1|UINT32|0x40000005
1495
1496 ## This PCD defines the HelloWorld print string.
1497 # This PCD is a sample to explain String typed PCD usage.
1498 # @Prompt HelloWorld print string.
1499 gEfiMdeModulePkgTokenSpaceGuid.PcdHelloWorldPrintString|L"UEFI Hello World!\n"|VOID*|0x40000004
1500
1501 ## Indicates the maximum size of the capsule image with a reset flag that the platform can support.
1502 # The default max size is 100MB (0x6400000) for more than one large capsule images.
1503 # @Prompt Max size of populated capsule.
1504 gEfiMdeModulePkgTokenSpaceGuid.PcdMaxSizePopulateCapsule|0x6400000|UINT32|0x0001001e
1505
1506 ## Indicates the maximum size of the capsule image without a reset flag that the platform can support.
1507 # The default max size is 10MB (0xa00000) for the casule image without reset flag setting.
1508 # @Prompt Max size of non-populated capsule.
1509 gEfiMdeModulePkgTokenSpaceGuid.PcdMaxSizeNonPopulateCapsule|0xa00000|UINT32|0x0001001f
1510
1511 ## Null-terminated Unicode string of the firmware vendor name that is the default name filled into the EFI System Table.
1512 # @Prompt Firmware vendor.
1513 gEfiMdeModulePkgTokenSpaceGuid.PcdFirmwareVendor|L"EDK II"|VOID*|0x00010050
1514
1515 ## Firmware revision that is the default revision filled into the EFI System Table.
1516 # @Prompt Firmware revision.
1517 gEfiMdeModulePkgTokenSpaceGuid.PcdFirmwareRevision|0x00010000|UINT32|0x00010051
1518
1519 ## Null-terminated Unicode string that describes the firmware version.
1520 # @Prompt Firmware version string.
1521 gEfiMdeModulePkgTokenSpaceGuid.PcdFirmwareVersionString|L""|VOID*|0x00010052
1522
1523 ## Null-terminated Unicode string that contains the date the firmware was released
1524 # @Prompt Firmware release data string.
1525 gEfiMdeModulePkgTokenSpaceGuid.PcdFirmwareReleaseDateString|L""|VOID*|0x00010053
1526
1527 ## PcdStatusCodeMemorySize is used when PcdStatusCodeUseMemory is set to true.
1528 # (PcdStatusCodeMemorySize * KBytes) is the total taken memory size.<BR><BR>
1529 # The default value in PeiPhase is 1 KBytes.<BR>
1530 # The default value in DxePhase is 128 KBytes.<BR>
1531 # @Prompt StatusCode memory size.
1532 gEfiMdeModulePkgTokenSpaceGuid.PcdStatusCodeMemorySize|1|UINT16|0x00010054
1533
1534 ## Indicates if to reset system when memory type information changes.<BR><BR>
1535 # TRUE - Resets system when memory type information changes.<BR>
1536 # FALSE - Does not reset system when memory type information changes.<BR>
1537 # @Prompt Reset on memory type information change.
1538 gEfiMdeModulePkgTokenSpaceGuid.PcdResetOnMemoryTypeInformationChange|TRUE|BOOLEAN|0x00010056
1539
1540 ## Specify the foreground color for Subtile text in HII Form Browser. The default value is EFI_BLUE.
1541 # Only following values defined in UEFI specification are valid:<BR><BR>
1542 # 0x00 (EFI_BLACK)<BR>
1543 # 0x01 (EFI_BLUE)<BR>
1544 # 0x02 (EFI_GREEN)<BR>
1545 # 0x03 (EFI_CYAN)<BR>
1546 # 0x04 (EFI_RED)<BR>
1547 # 0x05 (EFI_MAGENTA)<BR>
1548 # 0x06 (EFI_BROWN)<BR>
1549 # 0x07 (EFI_LIGHTGRAY)<BR>
1550 # 0x08 (EFI_DARKGRAY)<BR>
1551 # 0x09 (EFI_LIGHTBLUE)<BR>
1552 # 0x0A (EFI_LIGHTGREEN)<BR>
1553 # 0x0B (EFI_LIGHTCYAN)<BR>
1554 # 0x0C (EFI_LIGHTRED)<BR>
1555 # 0x0D (EFI_LIGHTMAGENTA)<BR>
1556 # 0x0E (EFI_YELLOW)<BR>
1557 # 0x0F (EFI_WHITE)<BR>
1558 # @Prompt Foreground color for browser subtile.
1559 # @ValidRange 0x80000004 | 0x00 - 0x0F
1560 gEfiMdeModulePkgTokenSpaceGuid.PcdBrowserSubtitleTextColor|0x01|UINT8|0x00010057
1561
1562 ## Specify the foreground color for prompt and Question value text in HII Form Browser. The default value is EFI_BLACK.
1563 # Only following values defined in UEFI specification are valid:<BR><BR>
1564 # 0x00 (EFI_BLACK)<BR>
1565 # 0x01 (EFI_BLUE)<BR>
1566 # 0x02 (EFI_GREEN)<BR>
1567 # 0x03 (EFI_CYAN)<BR>
1568 # 0x04 (EFI_RED)<BR>
1569 # 0x05 (EFI_MAGENTA)<BR>
1570 # 0x06 (EFI_BROWN)<BR>
1571 # 0x07 (EFI_LIGHTGRAY)<BR>
1572 # 0x08 (EFI_DARKGRAY)<BR>
1573 # 0x09 (EFI_LIGHTBLUE)<BR>
1574 # 0x0A (EFI_LIGHTGREEN)<BR>
1575 # 0x0B (EFI_LIGHTCYAN)<BR>
1576 # 0x0C (EFI_LIGHTRED)<BR>
1577 # 0x0D (EFI_LIGHTMAGENTA)<BR>
1578 # 0x0E (EFI_YELLOW)<BR>
1579 # 0x0F (EFI_WHITE)<BR>
1580 # @Prompt Foreground color for browser field.
1581 # @ValidRange 0x80000004 | 0x00 - 0x0F
1582 gEfiMdeModulePkgTokenSpaceGuid.PcdBrowserFieldTextColor|0x00|UINT8|0x00010058
1583
1584 ## Specify the foreground color for highlighted prompt and Question value text in HII Form Browser.
1585 # The default value is EFI_LIGHTGRAY. Only following values defined in UEFI specification are valid:<BR><BR>
1586 # 0x00 (EFI_BLACK)<BR>
1587 # 0x01 (EFI_BLUE)<BR>
1588 # 0x02 (EFI_GREEN)<BR>
1589 # 0x03 (EFI_CYAN)<BR>
1590 # 0x04 (EFI_RED)<BR>
1591 # 0x05 (EFI_MAGENTA)<BR>
1592 # 0x06 (EFI_BROWN)<BR>
1593 # 0x07 (EFI_LIGHTGRAY)<BR>
1594 # 0x08 (EFI_DARKGRAY)<BR>
1595 # 0x09 (EFI_LIGHTBLUE)<BR>
1596 # 0x0A (EFI_LIGHTGREEN)<BR>
1597 # 0x0B (EFI_LIGHTCYAN)<BR>
1598 # 0x0C (EFI_LIGHTRED)<BR>
1599 # 0x0D (EFI_LIGHTMAGENTA)<BR>
1600 # 0x0E (EFI_YELLOW)<BR>
1601 # 0x0F (EFI_WHITE)<BR>
1602 # @Prompt Foreground color for highlighted browser field.
1603 # @ValidRange 0x80000004 | 0x00 - 0x0F
1604 gEfiMdeModulePkgTokenSpaceGuid.PcdBrowserFieldTextHighlightColor|0x07|UINT8|0x00010059
1605
1606 ## Specify the background color for highlighted prompt and Question value text in HII Form Browser.
1607 # The default value is EFI_BACKGROUND_BLACK. Only following values defined in UEFI specification are valid:<BR><BR>
1608 # 0x00 (EFI_BACKGROUND_BLACK)<BR>
1609 # 0x10 (EFI_BACKGROUND_BLUE)<BR>
1610 # 0x20 (EFI_BACKGROUND_GREEN)<BR>
1611 # 0x30 (EFI_BACKGROUND_CYAN)<BR>
1612 # 0x40 (EFI_BACKGROUND_RED)<BR>
1613 # 0x50 (EFI_BACKGROUND_MAGENTA)<BR>
1614 # 0x60 (EFI_BACKGROUND_BROWN)<BR>
1615 # 0x70 (EFI_BACKGROUND_LIGHTGRAY)<BR>
1616 # @Prompt Background color for highlighted browser field.
1617 # @ValidList 0x80000005 | 0x00, 0x10, 0x20, 0x30, 0x40, 0x50, 0x60, 0x70
1618 gEfiMdeModulePkgTokenSpaceGuid.PcdBrowserFieldBackgroundHighlightColor|0x00|UINT8|0x0001005A
1619
1620 ## Time in second to delay for SATA devices to spin-up for recovery.
1621 # @Prompt SATA spin-up delay time in second for recovery path.
1622 gEfiMdeModulePkgTokenSpaceGuid.PcdSataSpinUpDelayInSecForRecoveryPath|15|UINT16|0x0001005B
1623
1624 ## This PCD is used to specify memory size with page number for a pre-allocated ACPI reserved memory
1625 # to hold runtime(after SmmReadyToLock) created S3 boot script entries. The default page number is 2.
1626 # When changing the value of this PCD, the platform developer should make sure the memory size is
1627 # large enough to hold the S3 boot script node created in runtime(after SmmReadyToLock) phase.
1628 # @Prompt Reserved page number for S3 Boot Script Runtime Table.
1629 gEfiMdeModulePkgTokenSpaceGuid.PcdS3BootScriptRuntimeTableReservePageNumber|0x2|UINT16|0x0001005C
1630
1631 ## The PCD is used to specify the stack size when capsule IA32 PEI transfers to long mode in PEI phase.
1632 # The default size is 32K. When changing the value of this PCD, the platform developer should
1633 # make sure the memory size is large enough to meet capsule PEI requirement in capsule update path.
1634 # @Prompt Stack size for CapsulePei transfer to long mode.
1635 gEfiMdeModulePkgTokenSpaceGuid.PcdCapsulePeiLongModeStackSize|0x8000|UINT32|0x0001005D
1636
1637 ## Indicates if 1G page table will be enabled.<BR><BR>
1638 # TRUE - 1G page table will be enabled.<BR>
1639 # FALSE - 1G page table will not be enabled.<BR>
1640 # @Prompt Enable 1G page table support.
1641 gEfiMdeModulePkgTokenSpaceGuid.PcdUse1GPageTable|FALSE|BOOLEAN|0x0001005E
1642
1643 ## Indicates if the Single Root I/O virtualization is supported.<BR><BR>
1644 # TRUE - Single Root I/O virtualization is supported.<BR>
1645 # FALSE - Single Root I/O virtualization is not supported.<BR>
1646 # @Prompt Enable SRIOV support.
1647 gEfiMdeModulePkgTokenSpaceGuid.PcdSrIovSupport|TRUE|BOOLEAN|0x10000044
1648
1649 ## Indicates if the Alternative Routing-ID is supported.<BR><BR>
1650 # TRUE - Alternative Routing-ID is supported.<BR>
1651 # FALSE - Alternative Routing-ID is not supported.<BR>
1652 # @Prompt Enable ARI support.
1653 gEfiMdeModulePkgTokenSpaceGuid.PcdAriSupport|TRUE|BOOLEAN|0x10000045
1654
1655 ## Indicates if the Multi Root I/O virtualization is supported.<BR><BR>
1656 # TRUE - Multi Root I/O virtualization is supported.<BR>
1657 # FALSE - Multi Root I/O virtualization is not supported.<BR>
1658 # @Prompt Enable MRIOV support.
1659 gEfiMdeModulePkgTokenSpaceGuid.PcdMrIovSupport|FALSE|BOOLEAN|0x10000046
1660
1661 ## Single root I/O virtualization virtual function memory BAR alignment.<BR><BR>
1662 # BITN set indicates 2 of n+12 power<BR>
1663 # BIT0 set indicates 4KB alignment<BR>
1664 # BIT1 set indicates 8KB alignment<BR>
1665 # @Prompt SRIOV system page size.
1666 gEfiMdeModulePkgTokenSpaceGuid.PcdSrIovSystemPageSize|0x1|UINT32|0x10000047
1667
1668 ## SMBIOS version.
1669 # @Prompt SMBIOS version.
1670 gEfiMdeModulePkgTokenSpaceGuid.PcdSmbiosVersion|0x0301|UINT16|0x00010055
1671
1672 ## SMBIOS Docrev field in SMBIOS 3.0 (64-bit) Entry Point Structure.
1673 # @Prompt SMBIOS Docrev field in SMBIOS 3.0 (64-bit) Entry Point Structure.
1674 gEfiMdeModulePkgTokenSpaceGuid.PcdSmbiosDocRev|0x1|UINT8|0x0001006A
1675
1676 ## SMBIOS produce method.
1677 # BIT0 set indicates 32-bit entry point and table are produced.<BR>
1678 # BIT1 set indicates 64-bit entry point and table are produced.<BR>
1679 # @Prompt The policy to produce SMBIOS entry point and table.
1680 gEfiMdeModulePkgTokenSpaceGuid.PcdSmbiosEntryPointProvideMethod|0x3|UINT32|0x00010069
1681
1682 ## This PCD specifies the additional pad size in FPDT Basic Boot Performance Table for
1683 # the extension FPDT boot records received after ReadyToBoot and before ExitBootService.
1684 # @Prompt Pad size for extension FPDT boot records.
1685 gEfiMdeModulePkgTokenSpaceGuid.PcdExtFpdtBootRecordPadSize|0x0|UINT32|0x0001005F
1686
1687 ## Indicates if ConIn device are connected on demand.<BR><BR>
1688 # TRUE - ConIn device are not connected during BDS and ReadKeyStroke/ReadKeyStrokeEx produced
1689 # by Consplitter should be called before any real key read operation.<BR>
1690 # FALSE - ConIn device may be connected normally during BDS.<BR>
1691 # @Prompt ConIn connect on demand.
1692 gEfiMdeModulePkgTokenSpaceGuid.PcdConInConnectOnDemand|FALSE|BOOLEAN|0x10000060
1693
1694 ## Indicates if the S.M.A.R.T feature of attached ATA hard disks will be enabled.<BR><BR>
1695 # TRUE - S.M.A.R.T feature of attached ATA hard disks will be enabled.<BR>
1696 # FALSE - S.M.A.R.T feature of attached ATA hard disks will be default status.<BR>
1697 # @Prompt Enable ATA S.M.A.R.T feature.
1698 gEfiMdeModulePkgTokenSpaceGuid.PcdAtaSmartEnable|TRUE|BOOLEAN|0x00010065
1699
1700 ## Indicates if full PCI enumeration is disabled.<BR><BR>
1701 # TRUE - Full PCI enumeration is disabled.<BR>
1702 # FALSE - Full PCI enumeration is not disabled.<BR>
1703 # @Prompt Disable full PCI enumeration.
1704 gEfiMdeModulePkgTokenSpaceGuid.PcdPciDisableBusEnumeration|FALSE|BOOLEAN|0x10000048
1705
1706 ## Disk I/O - Number of Data Buffer block.
1707 # Define the size in block of the pre-allocated buffer. It provide better
1708 # performance for large Disk I/O requests.
1709 # @Prompt Disk I/O - Number of Data Buffer block.
1710 gEfiMdeModulePkgTokenSpaceGuid.PcdDiskIoDataBufferBlockNum|64|UINT32|0x30001039
1711
1712 ## This PCD specifies the PCI-based UFS host controller mmio base address.
1713 # Define the mmio base address of the pci-based UFS host controller. If there are multiple UFS
1714 # host controllers, their mmio base addresses are calculated one by one from this base address.
1715 # @Prompt Mmio base address of pci-based UFS host controller.
1716 gEfiMdeModulePkgTokenSpaceGuid.PcdUfsPciHostControllerMmioBase|0xd0000000|UINT32|0x10000061
1717
1718 ## Specify Max ESRT cache entry number supported for FMP instances
1719 #
1720 # @Prompt Max FMP ESRT entry number to be synced & cached in repository.
1721 gEfiMdeModulePkgTokenSpaceGuid.PcdMaxFmpEsrtCacheNum|32|UINT32|0x0000006b
1722
1723 ## Specify Max ESRT cache entry number supported for Non FMP instances
1724 #
1725 # @Prompt Max Non-FMP ESRT entry number to be cached in repository.
1726 gEfiMdeModulePkgTokenSpaceGuid.PcdMaxNonFmpEsrtCacheNum|32|UINT32|0x0000006c
1727
1728 ## Specify of Capsule Flag defined by CapsuleGuid to request system reboot after capsule process
1729 #
1730 # @Prompt Flag to request system reboot after processing capsule.
1731 gEfiMdeModulePkgTokenSpaceGuid.PcdSystemRebootAfterCapsuleProcessFlag|0x0001|UINT16|0x0000006d
1732
1733 ## Publish PropertiesTable or not.
1734 #
1735 # If this PCD is TRUE, DxeCore publishs PropertiesTable.
1736 # DxeCore evaluates if all runtime drivers has 4K aligned PE sections. If all
1737 # PE sections in runtime drivers are 4K aligned, DxeCore sets BIT0 in
1738 # PropertiesTable. Or DxeCore clears BIT0 in PropertiesTable.
1739 # If this PCD is FALSE, DxeCore does not publish PropertiesTable.
1740 #
1741 # If PropertiesTable has BIT0 set, DxeCore uses below policy in UEFI memory map:
1742 # 1) Use EfiRuntimeServicesCode for runtime driver PE image code section and
1743 # use EfiRuntimeServicesData for runtime driver PE image header and other section.
1744 # 2) Set EfiRuntimeServicesCode to be EFI_MEMORY_RO.
1745 # 3) Set EfiRuntimeServicesData to be EFI_MEMORY_XP.
1746 # 4) Set EfiMemoryMappedIO and EfiMemoryMappedIOPortSpace to be EFI_MEMORY_XP.
1747 #
1748 # NOTE: Platform need gurantee this PCD is set correctly. Platform should set
1749 # this PCD to be TURE if and only if all runtime driver has seperated Code/Data
1750 # section. If PE code/data sections are merged, the result is unpredictable.
1751 #
1752 # UEFI 2.6 specification does not recommend to use this BIT0 attribute.
1753 #
1754 # @Prompt Publish UEFI PropertiesTable.
1755 gEfiMdeModulePkgTokenSpaceGuid.PcdPropertiesTableEnable|FALSE|BOOLEAN|0x0000006e
1756
1757 ## Default OEM ID for ACPI table creation, its length must be 0x6 bytes to follow ACPI specification.
1758 # @Prompt Default OEM ID for ACPI table creation.
1759 gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiDefaultOemId|"INTEL "|VOID*|0x30001034
1760
1761 ## Default OEM Table ID for ACPI table creation, it is "EDK2 ".
1762 # According to ACPI specification, this field is particularly useful when
1763 # defining a definition block to distinguish definition block functions.
1764 # The OEM assigns each dissimilar table a new OEM Table ID.
1765 # This PCD is ignored for definition block.
1766 # @Prompt Default OEM Table ID for ACPI table creation.
1767 gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiDefaultOemTableId|0x20202020324B4445|UINT64|0x30001035
1768
1769 ## Default OEM Revision for ACPI table creation.
1770 # According to ACPI specification, for LoadTable() opcode, the OS can also
1771 # check the OEM Table ID and Revision ID against a database for a newer
1772 # revision Definition Block of the same OEM Table ID and load it instead.
1773 # This PCD is ignored for definition block.
1774 # @Prompt Default OEM Revision for ACPI table creation.
1775 gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiDefaultOemRevision|0x00000002|UINT32|0x30001036
1776
1777 ## Default Creator ID for ACPI table creation.
1778 # According to ACPI specification, for tables containing Definition Blocks,
1779 # this is the ID for the ASL Compiler.
1780 # This PCD is ignored for definition block.
1781 # @Prompt Default Creator ID for ACPI table creation.
1782 gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiDefaultCreatorId|0x20202020|UINT32|0x30001037
1783
1784 ## Default Creator Revision for ACPI table creation.
1785 # According to ACPI specification, for tables containing Definition Blocks,
1786 # this is the revision for the ASL Compiler.
1787 # This PCD is ignored for definition block.
1788 # @Prompt Default Creator Revision for ACPI table creation.
1789 gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiDefaultCreatorRevision|0x01000013|UINT32|0x30001038
1790
1791 ## Indicates if to set NX for stack.<BR><BR>
1792 # For the DxeIpl and the DxeCore are both X64, set NX for stack feature also require PcdDxeIplBuildPageTables be TRUE.<BR>
1793 # For the DxeIpl and the DxeCore are both IA32 (PcdDxeIplSwitchToLongMode is FALSE), set NX for stack feature also require
1794 # IA32 PAE is supported and Execute Disable Bit is available.<BR>
1795 # TRUE - to set NX for stack.<BR>
1796 # FALSE - Not to set NX for stack.<BR>
1797 # @Prompt Set NX for stack.
1798 gEfiMdeModulePkgTokenSpaceGuid.PcdSetNxForStack|FALSE|BOOLEAN|0x0001006f
1799
1800 ## This PCD specifies the PCI-based SD/MMC host controller mmio base address.
1801 # Define the mmio base address of the pci-based SD/MMC host controller. If there are multiple SD/MMC
1802 # host controllers, their mmio base addresses are calculated one by one from this base address.
1803 # @Prompt Mmio base address of pci-based SD/MMC host controller.
1804 gEfiMdeModulePkgTokenSpaceGuid.PcdSdMmcPciHostControllerMmioBase|0xd0000000|UINT32|0x30001043
1805
1806 ## Indicates if ACPI S3 will be enabled.<BR><BR>
1807 # TRUE - ACPI S3 will be enabled.<BR>
1808 # FALSE - ACPI S3 will be disabled.<BR>
1809 # @Prompt ACPI S3 Enable.
1810 gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiS3Enable|TRUE|BOOLEAN|0x01100000
1811
1812 ## Specify memory size for boot script executor stack usage in S3 phase.
1813 # The default size 32K. When changing the value make sure the memory size is large enough
1814 # to meet boot script executor requirement in the S3 phase.
1815 # @Prompt Reserved S3 Boot Script Stack ACPI Memory Size
1816 gEfiMdeModulePkgTokenSpaceGuid.PcdS3BootScriptStackSize|0x8000|UINT32|0x02000000
1817
1818 ## Indicates if to use the optimized timing for best PS2 detection performance.
1819 # Note this PCD could be set to TRUE for best boot performance and set to FALSE for best device compatibility.<BR><BR>
1820 # TRUE - Use the optimized timing for best PS2 detection performance.<BR>
1821 # FALSE - Use the normal timing to detect PS2.<BR>
1822 # @Prompt Enable fast PS2 detection
1823 gEfiMdeModulePkgTokenSpaceGuid.PcdFastPS2Detection|FALSE|BOOLEAN|0x30001044
1824
1825 ## This is recover file name in PEI phase.
1826 # The file must be in the root directory.
1827 # The file name must be the 8.3 format.
1828 # The PCD data must be in UNICODE format.
1829 # @Prompt Recover file name in PEI phase
1830 gEfiMdeModulePkgTokenSpaceGuid.PcdRecoveryFileName|L"FVMAIN.FV"|VOID*|0x30001045
1831
1832 ## This PCD hold a list GUIDs for the ImageTypeId to indicate the
1833 # FMP capsule is a system FMP.
1834 # @Prompt A list of system FMP ImageTypeId GUIDs
1835 gEfiMdeModulePkgTokenSpaceGuid.PcdSystemFmpCapsuleImageTypeIdGuid|{0x0}|VOID*|0x30001046
1836
1837 ## This PCD holds the address mask for page table entries when memory encryption is
1838 # enabled on AMD processors supporting the Secure Encrypted Virtualization (SEV) feature.
1839 # This mask should be applied when creating 1:1 virtual to physical mapping tables.
1840 # @Prompt The address mask when memory encryption is enabled.
1841 gEfiMdeModulePkgTokenSpaceGuid.PcdPteMemoryEncryptionAddressOrMask|0x0|UINT64|0x30001047
1842
1843 [PcdsPatchableInModule]
1844 ## Specify memory size with page number for PEI code when
1845 # Loading Module at Fixed Address feature is enabled.
1846 # The value will be set by the build tool.
1847 # @Prompt LMFA PEI code page number.
1848 # @ValidList 0x80000001 | 0
1849 gEfiMdeModulePkgTokenSpaceGuid.PcdLoadFixAddressPeiCodePageNumber|0|UINT32|0x00000029
1850
1851 ## Specify memory size with page number for DXE boot time code when
1852 # Loading Module at Fixed Address feature is enabled.
1853 # The value will be set by the build tool.
1854 # @Prompt LMFA DXE boot code page number.
1855 # @ValidList 0x80000001 | 0
1856 gEfiMdeModulePkgTokenSpaceGuid.PcdLoadFixAddressBootTimeCodePageNumber|0|UINT32|0x0000002a
1857
1858 ## Specify memory size with page number for DXE runtime code when
1859 # Loading Module at Fixed Address feature is enabled.
1860 # The value will be set by the build tool.
1861 # @Prompt LMFA DXE runtime code page number.
1862 # @ValidList 0x80000001 | 0
1863 gEfiMdeModulePkgTokenSpaceGuid.PcdLoadFixAddressRuntimeCodePageNumber|0|UINT32|0x0000002b
1864
1865 ## Specify memory size with page number for SMM code when
1866 # Loading Module at Fixed Address feature is enabled.
1867 # The value will be set by the build tool.
1868 # @Prompt LMFA SMM code page number.
1869 # @ValidList 0x80000001 | 0
1870 gEfiMdeModulePkgTokenSpaceGuid.PcdLoadFixAddressSmmCodePageNumber|0|UINT32|0x0000002c
1871
1872 [PcdsDynamic, PcdsDynamicEx]
1873 ## This dynamic PCD hold an address to point to private data structure used in DxeS3BootScriptLib library
1874 # instance which records the S3 boot script table start address, length, etc. To introduce this PCD is
1875 # only for DxeS3BootScriptLib instance implementation purpose. The platform developer should make sure the
1876 # default value is set to Zero. And the PCD is assumed ONLY to be accessed in DxeS3BootScriptLib Library.
1877 # @Prompt S3 Boot Script Table Private Data pointer.
1878 # @ValidList 0x80000001 | 0x0
1879 gEfiMdeModulePkgTokenSpaceGuid.PcdS3BootScriptTablePrivateDataPtr|0x0|UINT64|0x00030000
1880
1881 ## This dynamic PCD hold an address to point to private data structure SMM copy used in DxeS3BootScriptLib library
1882 # instance which records the S3 boot script table start address, length, etc. To introduce this PCD is
1883 # only for DxeS3BootScriptLib instance implementation purpose. The platform developer should make sure the
1884 # default value is set to Zero. And the PCD is assumed ONLY to be accessed in DxeS3BootScriptLib Library.
1885 # @Prompt S3 Boot Script Table Private Smm Data pointer.
1886 # @ValidList 0x80000001 | 0x0
1887 gEfiMdeModulePkgTokenSpaceGuid.PcdS3BootScriptTablePrivateSmmDataPtr|0x0|UINT64|0x00030001
1888
1889 ## This dynamic PCD hold an address to point to the memory of page table. The page table establishes a 1:1
1890 # Virtual to Physical mapping according to the processor physical address bits.
1891 # @Prompt Identify Mapping Page Table pointer.
1892 # @ValidList 0x80000001 | 0x0
1893 gEfiMdeModulePkgTokenSpaceGuid.PcdIdentifyMappingPageTablePtr|0x0|UINT64|0x00030002
1894
1895 ## This dynamic PCD holds the information if there is any test key used by the platform.
1896 # @Prompt If there is any test key used by the platform.
1897 gEfiMdeModulePkgTokenSpaceGuid.PcdTestKeyUsed|FALSE|BOOLEAN|0x00030003
1898
1899 [UserExtensions.TianoCore."ExtraFiles"]
1900 MdeModulePkgExtra.uni