626e479f5e45b2f32d2f44d90abe5fd7d7b57aed
[mirror_edk2.git] / MdeModulePkg / MdeModulePkg.dec
1 ## @file MdeModulePkg.dec
2 # This package provides the modules that conform to UEFI/PI Industry standards.
3 # It also provides the definitions(including PPIs/PROTOCOLs/GUIDs and library classes)
4 # and libraries instances, which are used for those modules.
5 #
6 # Copyright (c) 2007 - 2017, Intel Corporation. All rights reserved.<BR>
7 # Copyright (c) 2016, Linaro Ltd. All rights reserved.<BR>
8 # (C) Copyright 2016 Hewlett Packard Enterprise Development LP<BR>
9 # Copyright (c) 2017, AMD Incorporated. All rights reserved.<BR>
10 #
11 # This program and the accompanying materials are licensed and made available under
12 # the terms and conditions of the BSD License that accompanies this distribution.
13 # The full text of the license may be found at
14 # http://opensource.org/licenses/bsd-license.php.
15 #
16 # THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
17 # WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
18 #
19 ##
20
21
22 [Defines]
23 DEC_SPECIFICATION = 0x00010005
24 PACKAGE_NAME = MdeModulePkg
25 PACKAGE_UNI_FILE = MdeModulePkg.uni
26 PACKAGE_GUID = BA0D78D6-2CAF-414b-BD4D-B6762A894288
27 PACKAGE_VERSION = 0.96
28
29 [Includes]
30 Include
31
32
33 [LibraryClasses]
34 ## @libraryclass IpIo layer upon EFI IP4 Protocol.
35 # This library is only intended to be used by UEFI network stack modules.
36 IpIoLib|Include/Library/IpIoLib.h
37
38 ## @libraryclass Basic function for UEFI network stack.
39 # This library is only intended to be used by UEFI network stack modules.
40 NetLib|Include/Library/NetLib.h
41
42 ## @libraryclass The helper routines to access UDP service.
43 # This library is only intended to be used by UEFI network stack modules.
44 UdpIoLib|Include/Library/UdpIoLib.h
45
46 ## @libraryclass The helper routines to access TCP service.
47 # This library is only intended to be used by UEFI network stack modules.
48 TcpIoLib|Include/Library/TcpIoLib.h
49
50 ## @libraryclass The helper routines to access HTTP service.
51 # This library is only intended to be used by UEFI network stack modules.
52 HttpLib|Include/Library/HttpLib.h
53
54 ## @libraryclass Defines a set of methods to reset whole system.
55 ResetSystemLib|Include/Library/ResetSystemLib.h
56
57 ## @libraryclass Defines a set of methods related do S3 mode.
58 # This library class is no longer used and modules using this library should
59 # directly locate EFI_PEI_S3_RESUME_PPI defined in PI 1.2 specification.
60 S3Lib|Include/Library/S3Lib.h
61
62 ## @libraryclass Defines a set of methods related recovery mode.
63 # This library class is no longer used and modules using this library should
64 # directly locate EFI_PEI_RECOVERY_MODULE_PPI defined in PI 1.2 specification.
65 RecoveryLib|Include/Library/RecoveryLib.h
66
67 ## @libraryclass Provides HII related functions.
68 HiiLib|Include/Library/HiiLib.h
69
70 ## @libraryclass Defines a set of interfaces on how to process capusle image update.
71 CapsuleLib|Include/Library/CapsuleLib.h
72
73 ## @libraryclass Library for Deferred Procedure Calls.
74 DpcLib|Include/Library/DpcLib.h
75
76 ## @libraryclass Provides global variables that are pointers
77 # to the UEFI HII related protocols.
78 #
79 UefiHiiServicesLib|Include/Library/UefiHiiServicesLib.h
80
81 ## @libraryclass Provides a set of interfaces to abstract the policy of security measurement.
82 #
83 SecurityManagementLib|Include/Library/SecurityManagementLib.h
84
85 ## @libraryclass OEM status code libary is used to report status code to OEM device.
86 #
87 OemHookStatusCodeLib|Include/Library/OemHookStatusCodeLib.h
88
89 ## @libraryclass Debug Agent is used to provide soft debug capability.
90 #
91 DebugAgentLib|Include/Library/DebugAgentLib.h
92
93 ## @libraryclass Provide platform specific hooks.
94 #
95 PlatformHookLib|Include/Library/PlatformHookLib.h
96
97 ## @libraryclass Provide platform specific hooks for SMM core.
98 #
99 SmmCorePlatformHookLib|Include/Library/SmmCorePlatformHookLib.h
100
101 ## @libraryclass Provide capability to maintain the data integrity cross S3 phase.
102 #
103 LockBoxLib|Include/Library/LockBoxLib.h
104
105 ## @libraryclass Provide the CPU exception handler.
106 #
107 CpuExceptionHandlerLib|Include/Library/CpuExceptionHandlerLib.h
108
109 ## @libraryclass Provides platform specific display interface.
110 #
111 CustomizedDisplayLib|Include/Library/CustomizedDisplayLib.h
112
113 ## @libraryclass Provides sorting functions
114 SortLib|Include/Library/SortLib.h
115
116 ## @libraryclass Provides core boot manager functions
117 UefiBootManagerLib|Include/Library/UefiBootManagerLib.h
118
119 ## @libraryclass Provides core boot manager functions
120 PlatformBootManagerLib|Include/Library/PlatformBootManagerLib.h
121
122 ## @libraryclass Provides common interfaces about TPM measurement for other modules.
123 #
124 TpmMeasurementLib|Include/Library/TpmMeasurementLib.h
125
126 ## @libraryclass Provides authenticated variable services.
127 #
128 AuthVariableLib|Include/Library/AuthVariableLib.h
129
130 ## @libraryclass Provides variable check services and database management.
131 #
132 VarCheckLib|Include/Library/VarCheckLib.h
133
134 ## @libraryclass Provides services to get variable error flag and do platform variable cleanup.
135 #
136 PlatformVarCleanupLib|Include/Library/PlatformVarCleanupLib.h
137
138 ## @libraryclass Provides services to get do the file explorer.
139 #
140 FileExplorerLib|Include/Library/FileExplorerLib.h
141
142 ## @libraryclass Provides interfaces about logo display.
143 #
144 BootLogoLib|Include/Library/BootLogoLib.h
145
146 ## @libraryclass Provides interfaces about Ipmi submit generic commond.
147 #
148 IpmiLib|Include/Library/IpmiLib.h
149
150 ## @libraryclass Provides interfaces for platform to return root bridge information to PciHostBridgeDxe driver.
151 #
152 PciHostBridgeLib|Include/Library/PciHostBridgeLib.h
153
154 ## @libraryclass Provides services to record memory profile of multilevel caller.
155 #
156 MemoryProfileLib|Include/Library/MemoryProfileLib.h
157
158 ## @libraryclass Provides an interface for performing UEFI Graphics Output Protocol Video blt operations.
159 ##
160 FrameBufferBltLib|Include/Library/FrameBufferBltLib.h
161
162 ## @libraryclass Provides services to authenticate a UEFI defined FMP Capsule.
163 #
164 FmpAuthenticationLib|Include/Library/FmpAuthenticationLib.h
165
166 ## @libraryclass Provides a service to register non-discoverable device
167 ##
168 NonDiscoverableDeviceRegistrationLib|Include/Library/NonDiscoverableDeviceRegistrationLib.h
169
170 [Guids]
171 ## MdeModule package token space guid
172 # Include/Guid/MdeModulePkgTokenSpace.h
173 gEfiMdeModulePkgTokenSpaceGuid = { 0xA1AFF049, 0xFDEB, 0x442a, { 0xB3, 0x20, 0x13, 0xAB, 0x4C, 0xB7, 0x2B, 0xBC }}
174
175 ## Hob guid for Pcd DataBase
176 # Include/Guid/PcdDataBaseHobGuid.h
177 gPcdDataBaseHobGuid = { 0xEA296D92, 0x0B69, 0x423C, { 0x8C, 0x28, 0x33, 0xB4, 0xE0, 0xA9, 0x12, 0x68 }}
178
179 ## Guid for PCD DataBase signature.
180 # Include/Guid/PcdDataBaseSignatureGuid.h
181 gPcdDataBaseSignatureGuid = { 0x3c7d193c, 0x682c, 0x4c14, { 0xa6, 0x8f, 0x55, 0x2d, 0xea, 0x4f, 0x43, 0x7e }}
182
183 ## Guid for EDKII implementation GUIDed opcodes
184 # Include/Guid/MdeModuleHii.h
185 gEfiIfrTianoGuid = { 0xf0b1735, 0x87a0, 0x4193, {0xb2, 0x66, 0x53, 0x8c, 0x38, 0xaf, 0x48, 0xce }}
186
187 ## Guid for Framework vfr GUIDed opcodes.
188 # Include/Guid/MdeModuleHii.h
189 gEfiIfrFrameworkGuid = { 0x31ca5d1a, 0xd511, 0x4931, { 0xb7, 0x82, 0xae, 0x6b, 0x2b, 0x17, 0x8c, 0xd7 }}
190
191 ## Guid to specify the System Non Volatile FV
192 # Include/Guid/SystemNvDataGuid.h
193 gEfiSystemNvDataFvGuid = { 0xFFF12B8D, 0x7696, 0x4C8B, { 0xA9, 0x85, 0x27, 0x47, 0x07, 0x5B, 0x4F, 0x50 }}
194
195 ## GUID used as the signature of FTW working block header.
196 # Include/Guid/SystemNvDataGuid.h
197 gEdkiiWorkingBlockSignatureGuid = { 0x9e58292b, 0x7c68, 0x497d, { 0xa0, 0xce, 0x65, 0x0, 0xfd, 0x9f, 0x1b, 0x95 }}
198
199 ## GUID used to build FTW last write data hob and install PPI to inform the check for FTW last write data has been done.
200 # Include/Guid/FaultTolerantWrite.h
201 gEdkiiFaultTolerantWriteGuid = { 0x1d3e9cb8, 0x43af, 0x490b, { 0x83, 0xa, 0x35, 0x16, 0xaa, 0x53, 0x20, 0x47 }}
202
203 ## Guid specify the device is the console out device.
204 # Include/Guid/ConsoleOutDevice.h
205 gEfiConsoleOutDeviceGuid = { 0xD3B36F2C, 0xD551, 0x11D4, { 0x9A, 0x46, 0x00, 0x90, 0x27, 0x3F, 0xC1, 0x4D }}
206
207 ## Guid specify the device is the console in device.
208 # Include/Guid/ConsoleInDevice.h
209 gEfiConsoleInDeviceGuid = { 0xD3B36F2B, 0xD551, 0x11D4, { 0x9A, 0x46, 0x00, 0x90, 0x27, 0x3F, 0xC1, 0x4D }}
210
211 ## Hob and Variable guid specify the platform memory type information.
212 # Include/Guid/MemoryTypeInformation.h
213 gEfiMemoryTypeInformationGuid = { 0x4C19049F, 0x4137, 0x4DD3, { 0x9C, 0x10, 0x8B, 0x97, 0xA8, 0x3F, 0xFD, 0xFA }}
214
215 ## Capsule update hob and variable guid
216 # Include/Guid/CapsuleVendor.h
217 gEfiCapsuleVendorGuid = { 0x711C703F, 0xC285, 0x4B10, { 0xA3, 0xB0, 0x36, 0xEC, 0xBD, 0x3C, 0x8B, 0xE2 }}
218
219 ## Guid specifiy the device is the StdErr device.
220 # Include/Guid/StandardErrorDevice.h
221 gEfiStandardErrorDeviceGuid = { 0xD3B36F2D, 0xD551, 0x11D4, { 0x9A, 0x46, 0x00, 0x90, 0x27, 0x3F, 0xC1, 0x4D }}
222
223 ## Guid acted as variable store header's signature and to specify the variable list entries put in the EFI system table.
224 # Include/Guid/VariableFormat.h
225 gEfiVariableGuid = { 0xddcf3616, 0x3275, 0x4164, { 0x98, 0xb6, 0xfe, 0x85, 0x70, 0x7f, 0xfe, 0x7d }}
226
227 ## Guid acted as the authenticated variable store header's signature, and to specify the variable list entries put in the EFI system table.
228 # Include/Guid/AuthenticatedVariableFormat.h
229 gEfiAuthenticatedVariableGuid = { 0xaaf32c78, 0x947b, 0x439a, { 0xa1, 0x80, 0x2e, 0x14, 0x4e, 0xc3, 0x77, 0x92 } }
230
231 # Include/Guid/VariableIndexTable.h
232 gEfiVariableIndexTableGuid = { 0x8cfdb8c8, 0xd6b2, 0x40f3, { 0x8e, 0x97, 0x02, 0x30, 0x7c, 0xc9, 0x8b, 0x7c }}
233
234 ## Guid is defined for SMM variable module to notify SMM variable wrapper module when variable write service was ready.
235 # Include/Guid/SmmVariableCommon.h
236 gSmmVariableWriteGuid = { 0x93ba1826, 0xdffb, 0x45dd, { 0x82, 0xa7, 0xe7, 0xdc, 0xaa, 0x3b, 0xbd, 0xf3 }}
237
238 ## Performance protocol guid that also acts as the performance HOB guid and performance variable GUID
239 # Include/Guid/Performance.h
240 gPerformanceProtocolGuid = { 0x76B6BDFA, 0x2ACD, 0x4462, { 0x9E, 0x3F, 0xCB, 0x58, 0xC9, 0x69, 0xD9, 0x37 } }
241 gSmmPerformanceProtocolGuid = { 0xf866226a, 0xeaa5, 0x4f5a, { 0xa9, 0xa, 0x6c, 0xfb, 0xa5, 0x7c, 0x58, 0x8e } }
242 gPerformanceExProtocolGuid = { 0x1ea81bec, 0xf01a, 0x4d98, { 0xa2, 0x1, 0x4a, 0x61, 0xce, 0x2f, 0xc0, 0x22 } }
243 gSmmPerformanceExProtocolGuid = { 0x931fc048, 0xc71d, 0x4455, { 0x89, 0x30, 0x47, 0x6, 0x30, 0xe3, 0xe, 0xe5 } }
244
245 ## Guid is defined for CRC32 encapsulation scheme.
246 # Include/Guid/Crc32GuidedSectionExtraction.h
247 gEfiCrc32GuidedSectionExtractionGuid = { 0xFC1BCDB0, 0x7D31, 0x49aa, {0x93, 0x6A, 0xA4, 0x60, 0x0D, 0x9D, 0xD0, 0x83 } }
248
249 ## Include/Guid/StatusCodeCallbackGuid.h
250 gStatusCodeCallbackGuid = {0xe701458c, 0x4900, 0x4ca5, {0xb7, 0x72, 0x3d, 0x37, 0x94, 0x9f, 0x79, 0x27}}
251
252 ## GUID identifies status code records HOB that originate from the PEI status code
253 # Include/Guid/MemoryStatusCodeRecord.h
254 gMemoryStatusCodeRecordGuid = { 0x060CC026, 0x4C0D, 0x4DDA, { 0x8F, 0x41, 0x59, 0x5F, 0xEF, 0x00, 0xA5, 0x02 }}
255
256 ## GUID used to pass DEBUG() macro information through the Status Code Protocol and Status Code PPI
257 # Include/Guid/StatusCodeDataTypeDebug.h
258 gEfiStatusCodeDataTypeDebugGuid = { 0x9A4E9246, 0xD553, 0x11D5, { 0x87, 0xE2, 0x00, 0x06, 0x29, 0x45, 0xC3, 0xB9 }}
259
260 ## A configuration Table Guid for Load module at fixed address
261 # Include/Guid/LoadModuleAtFixedAddress.h
262 gLoadFixedAddressConfigurationTableGuid = { 0x2CA88B53,0xD296,0x4080, { 0xA4,0xA5,0xCA,0xD9,0xBA,0xE2,0x4B,0x9 } }
263
264 ## GUID used to store the global debug mask value into an EFI Variable
265 # Include/Guid/DebugMask.h
266 gEfiGenericVariableGuid = { 0x59d1c24f, 0x50f1, 0x401a, {0xb1, 0x01, 0xf3, 0x3e, 0x0d, 0xae, 0xd4, 0x43} }
267
268 ## Event for the DXE Core to signal idle events
269 # Include/Guid/EventIdle.h
270 gIdleLoopEventGuid = { 0x3c8d294c, 0x5fc3, 0x4451, { 0xbb, 0x31, 0xc4, 0xc0, 0x32, 0x29, 0x5e, 0x6c } }
271
272 ## Include/Guid/RecoveryDevice.h
273 gRecoveryOnFatUsbDiskGuid = { 0x0FFBCE19, 0x324C, 0x4690, { 0xA0, 0x09, 0x98, 0xC6, 0xAE, 0x2E, 0xB1, 0x86 }}
274
275 ## Include/Guid/RecoveryDevice.h
276 gRecoveryOnFatIdeDiskGuid = { 0xB38573B6, 0x6200, 0x4AC5, { 0xB5, 0x1D, 0x82, 0xE6, 0x59, 0x38, 0xD7, 0x83 }}
277
278 ## Include/Guid/RecoveryDevice.h
279 gRecoveryOnFatFloppyDiskGuid = { 0x2E3D2E75, 0x9B2E, 0x412D, { 0xB4, 0xB1, 0x70, 0x41, 0x6B, 0x87, 0x00, 0xFF }}
280
281 ## Include/Guid/RecoveryDevice.h
282 gRecoveryOnDataCdGuid = { 0x5CAC0099, 0x0DC9, 0x48E5, { 0x80, 0x68, 0xBB, 0x95, 0xF5, 0x40, 0x0A, 0x9F }}
283
284 ## Include/Guid/SmmLockBox.h
285 gEfiSmmLockBoxCommunicationGuid = { 0x2a3cfebd, 0x27e8, 0x4d0a, { 0x8b, 0x79, 0xd6, 0x88, 0xc2, 0xa3, 0xe1, 0xc0 }}
286
287 ## Include/Guid/AcpiS3Context.h
288 gEfiAcpiVariableGuid = { 0xAF9FFD67, 0xEC10, 0x488A, { 0x9D, 0xFC, 0x6C, 0xBF, 0x5E, 0xE2, 0x2C, 0x2E }}
289
290 ## Include/Guid/AcpiS3Context.h
291 gEfiAcpiS3ContextGuid = { 0xef98d3a, 0x3e33, 0x497a, { 0xa4, 0x1, 0x77, 0xbe, 0x3e, 0xb7, 0x4f, 0x38 }}
292
293 ## Include/Guid/BootScriptExecutorVariable.h
294 gEfiBootScriptExecutorVariableGuid = { 0x3079818c, 0x46d4, 0x4a73, { 0xae, 0xf3, 0xe3, 0xe4, 0x6c, 0xf1, 0xee, 0xdb }}
295 gEfiBootScriptExecutorContextGuid = { 0x79cb58c4, 0xac51, 0x442f, { 0xaf, 0xd7, 0x98, 0xe4, 0x7d, 0x2e, 0x99, 0x8 }}
296
297 ## Include/Guid/UsbKeyBoardLayout.h
298 gUsbKeyboardLayoutPackageGuid = { 0xc0f3b43, 0x44de, 0x4907, { 0xb4, 0x78, 0x22, 0x5f, 0x6f, 0x62, 0x89, 0xdc }}
299 gUsbKeyboardLayoutKeyGuid = { 0x3a4d7a7c, 0x18a, 0x4b42, { 0x81, 0xb3, 0xdc, 0x10, 0xe3, 0xb5, 0x91, 0xbd }}
300
301 ## Include/Guid/HiiResourceSampleHii.h
302 gHiiResourceSamleFormSetGuid = { 0x4f4ef7f0, 0xaa29, 0x4ce9, { 0xba, 0x41, 0x64, 0x3e, 0x1, 0x23, 0xa9, 0x9f }}
303
304 ## Include/Guid/DriverSampleHii.h
305 gDriverSampleFormSetGuid = { 0xA04A27f4, 0xDF00, 0x4D42, { 0xB5, 0x52, 0x39, 0x51, 0x13, 0x02, 0x11, 0x3D }}
306 gDriverSampleInventoryGuid = { 0xb3f56470, 0x6141, 0x4621, { 0x8f, 0x19, 0x70, 0x4e, 0x57, 0x7a, 0xa9, 0xe8 }}
307 gEfiIfrRefreshIdOpGuid = { 0xF5E655D9, 0x02A6, 0x46f2, { 0x9E, 0x76, 0xB8, 0xBE, 0x8E, 0x60, 0xAB, 0x22 }}
308
309 ## Include/Guid/PlatDriOverrideHii.h
310 gPlatformOverridesManagerGuid = { 0x8614567d, 0x35be, 0x4415, { 0x8d, 0x88, 0xbd, 0x7d, 0xc, 0x9c, 0x70, 0xc0 }}
311
312 ## Include/Guid/Ip4Config2Hii.h
313 gIp4Config2NvDataGuid = { 0x9b942747, 0x154e, 0x4d29, { 0xa4, 0x36, 0xbf, 0x71, 0x0, 0xc8, 0xb5, 0x3b }}
314
315 ## Include/Guid/VlanConfigHii.h
316 gVlanConfigFormSetGuid = { 0xd79df6b0, 0xef44, 0x43bd, { 0x97, 0x97, 0x43, 0xe9, 0x3b, 0xcf, 0x5f, 0xa8 }}
317
318 ## Include/Guid/Ip4IScsiConfigHii.h
319 gIp4IScsiConfigGuid = { 0x6456ed61, 0x3579, 0x41c9, { 0x8a, 0x26, 0x0a, 0x0b, 0xd6, 0x2b, 0x78, 0xfc }}
320 gIScsiCHAPAuthInfoGuid = { 0x786ec0ac, 0x65ae, 0x4d1b, { 0xb1, 0x37, 0xd, 0x11, 0xa, 0x48, 0x37, 0x97 }}
321
322 ## Include/Guid/ZeroGuid.h
323 gZeroGuid = { 0x0, 0x0, 0x0, {0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0}}
324
325 ## Include/Guid/MtcVendor.h
326 gMtcVendorGuid = { 0xeb704011, 0x1402, 0x11d3, { 0x8e, 0x77, 0x0, 0xa0, 0xc9, 0x69, 0x72, 0x3b }}
327
328 ## Guid for Firmware Performance Data Table (FPDT) implementation.
329 # Include/Guid/FirmwarePerformance.h
330 gEfiFirmwarePerformanceGuid = { 0xc095791a, 0x3001, 0x47b2, { 0x80, 0xc9, 0xea, 0xc7, 0x31, 0x9f, 0x2f, 0xa4 }}
331 gFirmwarePerformanceS3PointerGuid = { 0xdc65adc, 0xa973, 0x4130, { 0x8d, 0xf0, 0x2a, 0xdb, 0xeb, 0x9e, 0x4a, 0x31 }}
332
333 ## Include/Guid/ExitBootServiceFailed.h
334 gEventExitBootServicesFailedGuid = { 0x4f6c5507, 0x232f, 0x4787, { 0xb9, 0x5e, 0x72, 0xf8, 0x62, 0x49, 0xc, 0xb1 } }
335
336 ## Include/Guid/ConnectConInEvent.h
337 gConnectConInEventGuid = { 0xdb4e8151, 0x57ed, 0x4bed, { 0x88, 0x33, 0x67, 0x51, 0xb5, 0xd1, 0xa8, 0xd7 }}
338
339 ## Include/Guid/StatusCodeDataTypeVariable.h
340 gEdkiiStatusCodeDataTypeVariableGuid = { 0xf6ee6dbb, 0xd67f, 0x4ea0, { 0x8b, 0x96, 0x6a, 0x71, 0xb1, 0x9d, 0x84, 0xad }}
341
342 ## Include/Guid/MemoryProfile.h
343 gEdkiiMemoryProfileGuid = { 0x821c9a09, 0x541a, 0x40f6, { 0x9f, 0x43, 0xa, 0xd1, 0x93, 0xa1, 0x2c, 0xfe }}
344 gEdkiiSmmMemoryProfileGuid = { 0xe22bbcca, 0x516a, 0x46a8, { 0x80, 0xe2, 0x67, 0x45, 0xe8, 0x36, 0x93, 0xbd }}
345
346 ## Include/Protocol/VarErrorFlag.h
347 gEdkiiVarErrorFlagGuid = { 0x4b37fe8, 0xf6ae, 0x480b, { 0xbd, 0xd5, 0x37, 0xd9, 0x8c, 0x5e, 0x89, 0xaa } }
348
349 ## GUID indicates the LZMA custom compress/decompress algorithm.
350 # Include/Guid/LzmaDecompress.h
351 gLzmaCustomDecompressGuid = { 0xEE4E5898, 0x3914, 0x4259, { 0x9D, 0x6E, 0xDC, 0x7B, 0xD7, 0x94, 0x03, 0xCF }}
352 gLzmaF86CustomDecompressGuid = { 0xD42AE6BD, 0x1352, 0x4bfb, { 0x90, 0x9A, 0xCA, 0x72, 0xA6, 0xEA, 0xE8, 0x89 }}
353
354 ## Include/Guid/TtyTerm.h
355 gEfiTtyTermGuid = { 0x7d916d80, 0x5bb1, 0x458c, {0xa4, 0x8f, 0xe2, 0x5f, 0xdd, 0x51, 0xef, 0x94 }}
356
357 ## Include/Guid/HiiBootMaintenanceFormset.h
358 gEfiIfrBootMaintenanceGuid = { 0xb2dedc91, 0xd59f, 0x48d2, { 0x89, 0x8a, 0x12, 0x49, 0xc, 0x74, 0xa4, 0xe0 }}
359
360 gEfiIfrFrontPageGuid = { 0xe58809f8, 0xfbc1, 0x48e2, { 0x88, 0x3a, 0xa3, 0x0f, 0xdc, 0x4b, 0x44, 0x1e } }
361
362 ## Include/Guid/RamDiskHii.h
363 gRamDiskFormSetGuid = { 0x2a46715f, 0x3581, 0x4a55, { 0x8e, 0x73, 0x2b, 0x76, 0x9a, 0xaa, 0x30, 0xc5 }}
364
365 ## Include/Guid/PiSmmCommunicationRegionTable.h
366 gEdkiiPiSmmCommunicationRegionTableGuid = { 0x4e28ca50, 0xd582, 0x44ac, {0xa1, 0x1f, 0xe3, 0xd5, 0x65, 0x26, 0xdb, 0x34}}
367
368 ## Include/Guid/PiSmmMemoryAttributesTable.h
369 gEdkiiPiSmmMemoryAttributesTableGuid = { 0x6b9fd3f7, 0x16df, 0x45e8, {0xbd, 0x39, 0xb9, 0x4a, 0x66, 0x54, 0x1a, 0x5d}}
370
371 ## Include/Guid/SmiHandlerProfile.h
372 gSmiHandlerProfileGuid = {0x49174342, 0x7108, 0x409b, {0x8b, 0xbe, 0x65, 0xfd, 0xa8, 0x53, 0x89, 0xf5}}
373
374 ## Include/Guid/NonDiscoverableDevice.h
375 gEdkiiNonDiscoverableAhciDeviceGuid = { 0xC7D35798, 0xE4D2, 0x4A93, {0xB1, 0x45, 0x54, 0x88, 0x9F, 0x02, 0x58, 0x4B } }
376 gEdkiiNonDiscoverableAmbaDeviceGuid = { 0x94440339, 0xCC93, 0x4506, {0xB4, 0xC6, 0xEE, 0x8D, 0x0F, 0x4C, 0xA1, 0x91 } }
377 gEdkiiNonDiscoverableEhciDeviceGuid = { 0xEAEE5615, 0x0CFD, 0x45FC, {0x87, 0x69, 0xA0, 0xD8, 0x56, 0x95, 0xAF, 0x85 } }
378 gEdkiiNonDiscoverableNvmeDeviceGuid = { 0xC5F25542, 0x2A79, 0x4A26, {0x81, 0xBB, 0x4E, 0xA6, 0x32, 0x33, 0xB3, 0x09 } }
379 gEdkiiNonDiscoverableOhciDeviceGuid = { 0xB20005B0, 0xBB2D, 0x496F, {0x86, 0x9C, 0x23, 0x0B, 0x44, 0x79, 0xE7, 0xD1 } }
380 gEdkiiNonDiscoverableSdhciDeviceGuid = { 0x1DD1D619, 0xF9B8, 0x463E, {0x86, 0x81, 0xD1, 0xDC, 0x7C, 0x07, 0xB7, 0x2C } }
381 gEdkiiNonDiscoverableUfsDeviceGuid = { 0x2EA77912, 0x80A8, 0x4947, {0xBE, 0x69, 0xCD, 0xD0, 0x0A, 0xFB, 0xE5, 0x56 } }
382 gEdkiiNonDiscoverableUhciDeviceGuid = { 0xA8CDA0A2, 0x4F37, 0x4A1B, {0x8E, 0x10, 0x8E, 0xF3, 0xCC, 0x3B, 0xF3, 0xA8 } }
383 gEdkiiNonDiscoverableXhciDeviceGuid = { 0xB1BE0BC5, 0x6C28, 0x442D, {0xAA, 0x37, 0x15, 0x1B, 0x42, 0x57, 0xBD, 0x78 } }
384
385 [Ppis]
386 ## Include/Ppi/AtaController.h
387 gPeiAtaControllerPpiGuid = { 0xa45e60d1, 0xc719, 0x44aa, { 0xb0, 0x7a, 0xaa, 0x77, 0x7f, 0x85, 0x90, 0x6d }}
388
389 ## Include/Ppi/UsbHostController.h
390 gPeiUsbHostControllerPpiGuid = { 0x652B38A9, 0x77F4, 0x453F, { 0x89, 0xD5, 0xE7, 0xBD, 0xC3, 0x52, 0xFC, 0x53 }}
391
392 ## Include/Ppi/Usb2HostController.h
393 gPeiUsb2HostControllerPpiGuid = { 0xfedd6305, 0xe2d7, 0x4ed5, { 0x9f, 0xaa, 0xda, 0x8, 0xe, 0x33, 0x6c, 0x22 }}
394
395 ## Include/Ppi/UsbController.h
396 gPeiUsbControllerPpiGuid = { 0x3BC1F6DE, 0x693E, 0x4547, { 0xA3, 0x00, 0x21, 0x82, 0x3C, 0xA4, 0x20, 0xB2 }}
397
398 ## Include/Ppi/UsbIo.h
399 gPeiUsbIoPpiGuid = { 0x7C29785C, 0x66B9, 0x49FC, { 0xB7, 0x97, 0x1C, 0xA5, 0x55, 0x0E, 0xF2, 0x83 }}
400
401 ## Include/Ppi/SecPerformance.h
402 gPeiSecPerformancePpiGuid = { 0x0ecc666b, 0x4662, 0x47f9, { 0x9d, 0xd5, 0xd0, 0x96, 0xff, 0x7d, 0xa4, 0x9e }}
403
404 ## Include/Ppi/SmmCommunication.h
405 gEfiPeiSmmCommunicationPpiGuid = { 0xae933e1c, 0xcc47, 0x4e38, { 0x8f, 0xe, 0xe2, 0xf6, 0x1d, 0x26, 0x5, 0xdf }}
406
407 ## Include/Ppi/SmmAccess.h
408 gPeiSmmAccessPpiGuid = { 0x268f33a9, 0xcccd, 0x48be, { 0x88, 0x17, 0x86, 0x5, 0x3a, 0xc3, 0x2e, 0xd6 }}
409
410 ## Include/Ppi/SmmControl.h
411 gPeiSmmControlPpiGuid = { 0x61c68702, 0x4d7e, 0x4f43, { 0x8d, 0xef, 0xa7, 0x43, 0x5, 0xce, 0x74, 0xc5 }}
412
413 ## Include/Ppi/PostBootScriptTable.h
414 gPeiPostScriptTablePpiGuid = { 0x88c9d306, 0x900, 0x4eb5, { 0x82, 0x60, 0x3e, 0x2d, 0xbe, 0xda, 0x1f, 0x89}}
415
416 ## Include/Ppi/SerialPortPei.h
417 gPeiSerialPortPpiGuid = { 0x490e9d85, 0x8aef, 0x4193, { 0x8e, 0x56, 0xf7, 0x34, 0xa9, 0xff, 0xac, 0x8b}}
418
419 ## Include/Ppi/UfsHostController.h
420 gEdkiiPeiUfsHostControllerPpiGuid = { 0xdc54b283, 0x1a77, 0x4cd6, { 0x83, 0xbb, 0xfd, 0xda, 0x46, 0x9a, 0x2e, 0xc6 }}
421
422 ## Include/Ppi/IpmiPpi.h
423 gPeiIpmiPpiGuid = { 0xa9731431, 0xd968, 0x4277, { 0xb7, 0x52, 0xa3, 0xa9, 0xa6, 0xae, 0x18, 0x98 }}
424
425 ## Include/Ppi/SdMmcHostController.h
426 gEdkiiPeiSdMmcHostControllerPpiGuid = { 0xb30dfeed, 0x947f, 0x4396, { 0xb1, 0x5a, 0xdf, 0xbd, 0xb9, 0x16, 0xdc, 0x24 }}
427
428 [Protocols]
429 ## Load File protocol provides capability to load and unload EFI image into memory and execute it.
430 # Include/Protocol/LoadPe32Image.h
431 # This protocol is deprecated. Native EDKII module should NOT use this protocol to load/unload image.
432 # If developer need implement such functionality, they should use BasePeCoffLib.
433 gEfiLoadPeImageProtocolGuid = { 0x5CB5C776, 0x60D5, 0x45EE, { 0x88, 0x3C, 0x45, 0x27, 0x08, 0xCD, 0x74, 0x3F }}
434
435 ## Print protocols define basic print functions to print the format unicode and ascii string.
436 # Include/Protocol/Print2.h
437 gEfiPrint2ProtocolGuid = { 0xf05976ef, 0x83f1, 0x4f3d, { 0x86, 0x19, 0xf7, 0x59, 0x5d, 0x41, 0xe5, 0x38 } }
438 gEfiPrint2SProtocolGuid = { 0xcc252d2, 0xc106, 0x4661, { 0xb5, 0xbd, 0x31, 0x47, 0xa4, 0xf8, 0x1f, 0x92 } }
439
440 ## This protocol defines the generic memory test interfaces in Dxe phase.
441 # Include/Protocol/GenericMemoryTest.h
442 gEfiGenericMemTestProtocolGuid = { 0x309DE7F1, 0x7F5E, 0x4ACE, { 0xB4, 0x9C, 0x53, 0x1B, 0xE5, 0xAA, 0x95, 0xEF }}
443
444 ## This protocol defines the Debugger Configuration interface.
445 # Include/Protocol/DebuggerConfiguration.h
446 gEfiDebuggerConfigurationProtocolGuid = { 0x577d959c, 0xe967, 0x4546, { 0x86, 0x20, 0xc7, 0x78, 0xfa, 0xe5, 0xda, 0x05 }}
447
448 ## Include/Protocol/Dpc.h
449 gEfiDpcProtocolGuid = {0x480f8ae9, 0xc46, 0x4aa9, { 0xbc, 0x89, 0xdb, 0x9f, 0xba, 0x61, 0x98, 0x6 }}
450
451 ## Fault Tolerant Write protocol provides boot-time service to do fault tolerant write capability for block devices.
452 # Include/Protocol/FaultTolerantWrite.h
453 gEfiFaultTolerantWriteProtocolGuid = { 0x3EBD9E82, 0x2C78, 0x4DE6, { 0x97, 0x86, 0x8D, 0x4B, 0xFC, 0xB7, 0xC8, 0x81 }}
454
455 ## This protocol provides boot-time service to do fault tolerant write capability for block devices in SMM environment.
456 # Include/Protocol/SmmFaultTolerantWrite.h
457 gEfiSmmFaultTolerantWriteProtocolGuid = { 0x3868fc3b, 0x7e45, 0x43a7, { 0x90, 0x6c, 0x4b, 0xa4, 0x7d, 0xe1, 0x75, 0x4d }}
458
459 ## This protocol is used to abstract the swap operation of boot block and backup block of boot FV.
460 # Include/Protocol/SwapAddressRange.h
461 gEfiSwapAddressRangeProtocolGuid = { 0x1259F60D, 0xB754, 0x468E, { 0xA7, 0x89, 0x4D, 0xB8, 0x5D, 0x55, 0xE8, 0x7E }}
462
463 ## This protocol is used to abstract the swap operation of boot block and backup block of boot FV in SMM environment.
464 # Include/Protocol/SmmSwapAddressRange.h
465 gEfiSmmSwapAddressRangeProtocolGuid = { 0x67c4f112, 0x3385, 0x4e55, { 0x9c, 0x5b, 0xc0, 0x5b, 0x71, 0x7c, 0x42, 0x28 }}
466
467 ## This protocol is intended for use as a means to store data in the EFI SMM environment.
468 # Include/Protocol/SmmVariableProtocol.h
469 gEfiSmmVariableProtocolGuid = { 0xed32d533, 0x99e6, 0x4209, { 0x9c, 0xc0, 0x2d, 0x72, 0xcd, 0xd9, 0x98, 0xa7 }}
470
471 ## This protocol is intended for use as a means to mark a variable read-only after the event EFI_END_OF_DXE_EVENT_GUID is signaled.
472 # Include/Protocol/VariableLock.h
473 gEdkiiVariableLockProtocolGuid = { 0xcd3d0a05, 0x9e24, 0x437c, { 0xa8, 0x91, 0x1e, 0xe0, 0x53, 0xdb, 0x76, 0x38 }}
474
475 ## Include/Protocol/VarCheck.h
476 gEdkiiVarCheckProtocolGuid = { 0xaf23b340, 0x97b4, 0x4685, { 0x8d, 0x4f, 0xa3, 0xf2, 0x81, 0x69, 0xb2, 0x1d } }
477
478 ## Include/Protocol/SmmVarCheck.h
479 gEdkiiSmmVarCheckProtocolGuid = { 0xb0d8f3c1, 0xb7de, 0x4c11, { 0xbc, 0x89, 0x2f, 0xb5, 0x62, 0xc8, 0xc4, 0x11 } }
480
481 ## This protocol is similar with DXE FVB protocol and used in the UEFI SMM evvironment.
482 # Include/Protocol/SmmFirmwareVolumeBlock.h
483 gEfiSmmFirmwareVolumeBlockProtocolGuid = { 0xd326d041, 0xbd31, 0x4c01, { 0xb5, 0xa8, 0x62, 0x8b, 0xe8, 0x7f, 0x6, 0x53 }}
484
485 ## This protocol allows the error level mask for DEBUG() macros to be adjusted for DXE Phase modules
486 # Include/Guid/DebugMask.h
487 gEfiDebugMaskProtocolGuid = { 0x4c8a2451, 0xc207, 0x405b, {0x96, 0x94, 0x99, 0xea, 0x13, 0x25, 0x13, 0x41} }
488
489 ## Include/Protocol/LockBox.h
490 gEfiLockBoxProtocolGuid = { 0xbd445d79, 0xb7ad, 0x4f04, { 0x9a, 0xd8, 0x29, 0xbd, 0x20, 0x40, 0xeb, 0x3c }}
491
492 ## Include/Protocol/FormBrowserEx.h
493 gEfiFormBrowserExProtocolGuid = { 0x1f73b18d, 0x4630, 0x43c1, { 0xa1, 0xde, 0x6f, 0x80, 0x85, 0x5d, 0x7d, 0xa4 } }
494 gEdkiiFormBrowserExProtocolGuid = { 0x1f73b18d, 0x4630, 0x43c1, { 0xa1, 0xde, 0x6f, 0x80, 0x85, 0x5d, 0x7d, 0xa4 } }
495
496 ## Include/Protocol/EbcVmTest.h
497 gEfiEbcVmTestProtocolGuid = { 0xAAEACCFD, 0xF27B, 0x4C17, { 0xB6, 0x10, 0x75, 0xCA, 0x1F, 0x2D, 0xFB, 0x52 } }
498
499 ## Include/Protocol/EbcSimpleDebugger.h
500 gEfiEbcSimpleDebuggerProtocolGuid = { 0x2a72d11e, 0x7376, 0x40f6, { 0x9c, 0x68, 0x23, 0xfa, 0x2f, 0xe3, 0x63, 0xf1 } }
501
502 ## Include/Protocol/BootLogo.h
503 gEfiBootLogoProtocolGuid = { 0xcdea2bd3, 0xfc25, 0x4c1c, { 0xb9, 0x7c, 0xb3, 0x11, 0x86, 0x6, 0x49, 0x90 } }
504
505 ## Include/Protocol/DisplayProtocol.h
506 gEdkiiFormDisplayEngineProtocolGuid = { 0x9bbe29e9, 0xfda1, 0x41ec, { 0xad, 0x52, 0x45, 0x22, 0x13, 0x74, 0x2d, 0x2e } }
507
508 ## Include/Protocol/FormBrowserEx2.h
509 gEdkiiFormBrowserEx2ProtocolGuid = { 0xa770c357, 0xb693, 0x4e6d, { 0xa6, 0xcf, 0xd2, 0x1c, 0x72, 0x8e, 0x55, 0xb } }
510
511 ## Include/Protocol/UfsHostController.h
512 gEdkiiUfsHostControllerProtocolGuid = { 0xebc01af5, 0x7a9, 0x489e, { 0xb7, 0xce, 0xdc, 0x8, 0x9e, 0x45, 0x9b, 0x2f } }
513
514 ## Include/Protocol/EsrtManagement.h
515 gEsrtManagementProtocolGuid = { 0xa340c064, 0x723c, 0x4a9c, { 0xa4, 0xdd, 0xd5, 0xb4, 0x7a, 0x26, 0xfb, 0xb0 }}
516
517 ## Include/Protocol/SmmExitBootServices.h
518 gEdkiiSmmExitBootServicesProtocolGuid = { 0x296eb418, 0xc4c8, 0x4e05, { 0xab, 0x59, 0x39, 0xe8, 0xaf, 0x56, 0xf0, 0xa } }
519
520 ## Include/Protocol/SmmLegacyBoot.h
521 gEdkiiSmmLegacyBootProtocolGuid = { 0x85a8ab57, 0x644, 0x4110, { 0x85, 0xf, 0x98, 0x13, 0x22, 0x4, 0x70, 0x70 } }
522
523 ## Include/Protocol/SmmReadyToBoot.h
524 gEdkiiSmmReadyToBootProtocolGuid = { 0x6e057ecf, 0xfa99, 0x4f39, { 0x95, 0xbc, 0x59, 0xf9, 0x92, 0x1d, 0x17, 0xe4 } }
525
526 ## Include/Protocol/PlatformLogo.h
527 gEdkiiPlatformLogoProtocolGuid = { 0x53cd299f, 0x2bc1, 0x40c0, { 0x8c, 0x07, 0x23, 0xf6, 0x4f, 0xdb, 0x30, 0xe0 } }
528
529 ## Include/Protocol/FileExplorer.h
530 gEfiFileExplorerProtocolGuid = { 0x2C03C536, 0x4594, 0x4515, { 0x9E, 0x7A, 0xD3, 0xD2, 0x04, 0xFE, 0x13, 0x63 } }
531
532 ## Include/Protocol/IpmiProtocol.h
533 gIpmiProtocolGuid = { 0xdbc6381f, 0x5554, 0x4d14, { 0x8f, 0xfd, 0x76, 0xd7, 0x87, 0xb8, 0xac, 0xbf } }
534 gSmmIpmiProtocolGuid = { 0x5169af60, 0x8c5a, 0x4243, { 0xb3, 0xe9, 0x56, 0xc5, 0x6d, 0x18, 0xee, 0x26 } }
535
536 ## PS/2 policy protocol abstracts the specific platform initialization and setting.
537 # Include/Protocol/Ps2Policy.h
538 gEfiPs2PolicyProtocolGuid = { 0x4DF19259, 0xDC71, 0x4D46, { 0xBE, 0xF1, 0x35, 0x7B, 0xB5, 0x78, 0xC4, 0x18 } }
539
540 ## Include/Protocol/NonDiscoverableDevice.h
541 gEdkiiNonDiscoverableDeviceProtocolGuid = { 0x0d51905b, 0xb77e, 0x452a, {0xa2, 0xc0, 0xec, 0xa0, 0xcc, 0x8d, 0x51, 0x4a } }
542
543 #
544 # [Error.gEfiMdeModulePkgTokenSpaceGuid]
545 # 0x80000001 | Invalid value provided.
546 # 0x80000002 | Reserved bits must be set to zero.
547 # 0x80000003 | Incorrect progress code provided.
548 # 0x80000004 | Invalid foreground color specified.
549 # 0x80000005 | Invalid background color specified.
550 # 0x80000006 | Incorrect error code provided.
551 #
552
553 [PcdsFeatureFlag]
554 ## Indicates if the platform can support update capsule across a system reset.<BR><BR>
555 # TRUE - Supports update capsule across a system reset.<BR>
556 # FALSE - Does not support update capsule across a system reset.<BR>
557 # @Prompt Enable update capsule across a system reset.
558 gEfiMdeModulePkgTokenSpaceGuid.PcdSupportUpdateCapsuleReset|FALSE|BOOLEAN|0x0001001d
559
560 ## Indicates if all PCD PPI services will be enabled.<BR><BR>
561 # TRUE - All PCD PPI services will be produced.<BR>
562 # FALSE - Minimal PCD PPI services (only GetService) will be produced.<BR>
563 # @Prompt Enable full PEI PCD services.
564 gEfiMdeModulePkgTokenSpaceGuid.PcdPeiFullPcdDatabaseEnable|TRUE|BOOLEAN|0x00010020
565
566 ## Indicates if the Device Path To Text Protocol should be produced by the platform.
567 # It can be disabled to save size.<BR><BR>
568 # TRUE - Device Path To Text Protocol will be produced.<BR>
569 # FALSE - Device Path To Text Protocol will not be produced.<BR>
570 # @Prompt Enable Device Path to Text support.
571 gEfiMdeModulePkgTokenSpaceGuid.PcdDevicePathSupportDevicePathToText|TRUE|BOOLEAN|0x00010037
572
573 ## Indicates if the Device Path From Text Protocol should be produced by the platform.
574 # It can be disabled to save size.<BR><BR>
575 # TRUE - Device Path From Text Protocol will be produced.<BR>
576 # FALSE - Device Path From Text Protocol will not be produced.<BR>
577 # @Prompt Enable Device Path From Text support.
578 gEfiMdeModulePkgTokenSpaceGuid.PcdDevicePathSupportDevicePathFromText|TRUE|BOOLEAN|0x00010038
579
580 ## Indicates if the statistics about variable usage will be collected. This information is
581 # stored as a vendor configuration table into the EFI system table.
582 # Set this PCD to TRUE to use VariableInfo application in MdeModulePkg\Application directory to get
583 # variable usage info. VariableInfo application will not output information if not set to TRUE.<BR><BR>
584 # TRUE - Statistics about variable usage will be collected.<BR>
585 # FALSE - Statistics about variable usage will not be collected.<BR>
586 # @Prompt Enable variable statistics collection.
587 gEfiMdeModulePkgTokenSpaceGuid.PcdVariableCollectStatistics|FALSE|BOOLEAN|0x0001003f
588
589 ## Indicates if Unicode Collation Protocol will be installed.<BR><BR>
590 # TRUE - Installs Unicode Collation Protocol.<BR>
591 # FALSE - Does not install Unicode Collation Protocol.<BR>
592 # @Prompt Enable Unicode Collation support.
593 gEfiMdeModulePkgTokenSpaceGuid.PcdUnicodeCollationSupport|TRUE|BOOLEAN|0x00010040
594
595 ## Indicates if Unicode Collation 2 Protocol will be installed.<BR><BR>
596 # TRUE - Installs Unicode Collation 2 Protocol.<BR>
597 # FALSE - Does not install Unicode Collation 2 Protocol.<BR>
598 # @Prompt Enable Unicode Collation 2 support.
599 gEfiMdeModulePkgTokenSpaceGuid.PcdUnicodeCollation2Support|TRUE|BOOLEAN|0x00010041
600
601 ## Indicates if Graphics Output Protocol will be installed on virtual handle created by ConsplitterDxe.
602 # It could be set FALSE to save size.<BR><BR>
603 # TRUE - Installs Graphics Output Protocol on virtual handle created by ConsplitterDxe.<BR>
604 # FALSE - Does not install Graphics Output Protocol on virtual handle created by ConsplitterDxe.<BR>
605 # @Prompt Enable ConOut GOP support.
606 gEfiMdeModulePkgTokenSpaceGuid.PcdConOutGopSupport|TRUE|BOOLEAN|0x00010042
607
608 ## Indicates if UGA Draw Protocol will be installed on virtual handle created by ConsplitterDxe.
609 # It could be set FALSE to save size.<BR><BR>
610 # TRUE - Installs UGA Draw Protocol on virtual handle created by ConsplitterDxe.<BR>
611 # FALSE - Does not install UGA Draw Protocol on virtual handle created by ConsplitterDxe.<BR>
612 # @Prompt Enable ConOut UGA support.
613 gEfiMdeModulePkgTokenSpaceGuid.PcdConOutUgaSupport|TRUE|BOOLEAN|0x00010043
614
615 ## Indicates PeiCore will first search TE section from the PEIM to load the image, or PE32 section, when PeiCore dispatches a PEI module.
616 # This PCD is used to tune PEI phase performance to reduce the search image time.
617 # It can be set according to the generated image section type.<BR><BR>
618 # TRUE - PeiCore will first search TE section from PEIM to load the image, if TE section is not found, then PeiCore will search PE section.<BR>
619 # FALSE - PeiCore will first search PE section from PEIM to load the image.<BR>
620 # @Prompt PeiCore search TE section first.
621 gEfiMdeModulePkgTokenSpaceGuid.PcdPeiCoreImageLoaderSearchTeSectionFirst|TRUE|BOOLEAN|0x00010044
622
623 ## Indicates if to turn off the support of legacy usb. So legacy usb device driver can not make use of SMI
624 # interrupt to access usb device in the case of absence of usb stack.
625 # DUET platform requires the token to be TRUE.<BR><BR>
626 # TRUE - Turn off usb legacy support.<BR>
627 # FALSE - Does not turn off usb legacy support.<BR>
628 # @Prompt Turn off USB legacy support.
629 gEfiMdeModulePkgTokenSpaceGuid.PcdTurnOffUsbLegacySupport|FALSE|BOOLEAN|0x00010047
630
631 ## Indicates if HiiImageProtocol will be installed.
632 # FALSE is for size reduction.<BR><BR>
633 # TRUE - Installs HiiImageProtocol.<BR>
634 # FALSE - Does not install HiiImageProtocol.<BR>
635 # @Prompt Enable HII image support.
636 gEfiMdeModulePkgTokenSpaceGuid.PcdSupportHiiImageProtocol|TRUE|BOOLEAN|0x00010100
637
638 ## Indicates if USB KeyBoard Driver disables the default keyboard layout.
639 # The default keyboard layout serves as the backup when no keyboard layout can be retrieved
640 # from HII database.<BR><BR>
641 # TRUE - USB KeyBoard Driver will disable the default keyboard layout.<BR>
642 # FALSE - USB KeyBoard Driver will not disable the default keyboard layout.<BR>
643 # @Prompt Disable default keyboard layout in USB KeyBoard Driver.
644 gEfiMdeModulePkgTokenSpaceGuid.PcdDisableDefaultKeyboardLayoutInUsbKbDriver|FALSE|BOOLEAN|0x00010200
645
646 ## Indicates if backward compatibility to Framework HII and Framework FvHob is supported.<BR><BR>
647 # TRUE - Setup Browser supports GUID opcodes generated from Framework HII VFR file by VFR compiler.
648 # the PeiCore will handle the framework FvHob and install FvInfo PPI for it.<BR>
649 # FALSE - Setup Browser doesn't support GUID opcodes generated from Framework HII VFR file by VFR compiler.
650 # the PeiCore will not handle the framework FvHob and install FvInfo PPI for it.<BR>
651 # @Prompt Enable framework backward compatibility support.
652 gEfiMdeModulePkgTokenSpaceGuid.PcdFrameworkCompatibilitySupport|FALSE|BOOLEAN|0x00012009
653
654 ## Indicates if HelloWorld Application will print the verbose information.
655 # This PCD is a sample to explain FeatureFlag PCD usage.<BR><BR>
656 # TRUE - HelloWorld Application will print the verbose information.<BR>
657 # FALSE - HelloWorld Application will not print the verbose information.<BR>
658 # @Prompt Enable HelloWorld print.
659 gEfiMdeModulePkgTokenSpaceGuid.PcdHelloWorldPrintEnable|TRUE|BOOLEAN|0x0001200a
660
661 ## Indicates if FULL FTW protocol services (total six APIs) will be produced.<BR><BR>
662 # TRUE - Produces FULL FTW protocol services (total six APIs).<BR>
663 # FALSE - Only FTW Write service is available.<BR>
664 # @Prompt Enable FULL FTW services.
665 gEfiMdeModulePkgTokenSpaceGuid.PcdFullFtwServiceEnable|TRUE|BOOLEAN|0x0001200b
666
667 ## Indicates if DXE IPL supports the UEFI decompression algorithm.<BR><BR>
668 # TRUE - DXE IPL will support UEFI decompression.<BR>
669 # FALSE - DXE IPL will not support UEFI decompression to save space.<BR>
670 # @Prompt Enable UEFI decompression support in DXE IPL.
671 gEfiMdeModulePkgTokenSpaceGuid.PcdDxeIplSupportUefiDecompress|TRUE|BOOLEAN|0x0001200c
672
673 ## Indicates if PciBus driver supports the hot plug device.<BR><BR>
674 # TRUE - PciBus driver supports the hot plug device.<BR>
675 # FALSE - PciBus driver doesn't support the hot plug device.<BR>
676 # @Prompt Enable PciBus hot plug device support.
677 gEfiMdeModulePkgTokenSpaceGuid.PcdPciBusHotplugDeviceSupport|TRUE|BOOLEAN|0x0001003d
678
679 ## Indicates if the PciBus driver probes non-standard, such as 2K/1K/512, granularity for PCI to PCI bridge I/O window.<BR><BR>
680 # TRUE - PciBus driver probes non-standard granularity for PCI to PCI bridge I/O window.<BR>
681 # FALSE - PciBus driver doesn't probe non-standard granularity for PCI to PCI bridge I/O window.<BR>
682 # @Prompt Enable PCI bridge IO alignment probe.
683 gEfiMdeModulePkgTokenSpaceGuid.PcdPciBridgeIoAlignmentProbe|FALSE|BOOLEAN|0x0001004e
684
685 ## Indicates if StatusCode is reported via Serial port.<BR><BR>
686 # TRUE - Reports StatusCode via Serial port.<BR>
687 # FALSE - Does not report StatusCode via Serial port.<BR>
688 # @Prompt Enable StatusCode via Serial port.
689 gEfiMdeModulePkgTokenSpaceGuid.PcdStatusCodeUseSerial|TRUE|BOOLEAN|0x00010022
690
691 ## Indicates if StatusCode is stored in memory.
692 # The memory is boot time memory in PEI Phase and is runtime memory in DXE Phase.<BR><BR>
693 # TRUE - Stores StatusCode in memory.<BR>
694 # FALSE - Does not store StatusCode in memory.<BR>
695 # @Prompt Enable StatusCode via memory.
696 gEfiMdeModulePkgTokenSpaceGuid.PcdStatusCodeUseMemory|FALSE|BOOLEAN|0x00010023
697
698 ## Indicates if PEI phase StatusCode will be replayed in DXE phase.<BR><BR>
699 # TRUE - Replays PEI phase StatusCode in DXE phased.<BR>
700 # FALSE - Does not replay PEI phase StatusCode in DXE phase.<BR>
701 # @Prompt Enable PEI StatusCode replay in DXE phase
702 gEfiMdeModulePkgTokenSpaceGuid.PcdStatusCodeReplayIn|FALSE|BOOLEAN|0x0001002d
703
704 ## Indicates if ACPI SDT protocol will be installed.<BR><BR>
705 # TRUE - Installs ACPI SDT protocol.<BR>
706 # FALSE - Does not install ACPI SDT protocol.<BR>
707 # @Prompt Enable ACPI SDT support.
708 gEfiMdeModulePkgTokenSpaceGuid.PcdInstallAcpiSdtProtocol|FALSE|BOOLEAN|0x0001004d
709
710 ## Indicates if the unaligned I/O, MMIO, and PCI Configuration cycles through the PCI I/O Protocol are enabled.
711 # The default value for this PCD is false to disable support for unaligned PCI I/O Protocol requests.<BR><BR>
712 # TRUE - Enables the unaligned I/O, MMIO, and PCI Configuration cycles through the PCI I/O Protocol.<BR>
713 # FALSE - Disables the unaligned I/O, MMIO, and PCI Configuration cycles through the PCI I/O Protocol.<BR>
714 # @Prompt Enable unaligned PCI I/O support.
715 gEfiMdeModulePkgTokenSpaceGuid.PcdUnalignedPciIoEnable|FALSE|BOOLEAN|0x0001003e
716
717 ## Indicates if TEXT statement is always set to GrayOut statement in HII Form Browser.<BR><BR>
718 # TRUE - TEXT statement will always be set to GrayOut.<BR>
719 # FALSE - TEXT statement will be set to GrayOut only when GrayOut condition is TRUE.<BR>
720 # @Prompt Always GrayOut TEXT statement.
721 gEfiMdeModulePkgTokenSpaceGuid.PcdBrowserGrayOutTextStatement|FALSE|BOOLEAN|0x0001004f
722
723 ## Indicates if unselectable menu should be gray out in HII Form Browser.<BR><BR>
724 # TRUE - The unselectable menu will be set to GrayOut.<BR>
725 # FALSE - The menu will be show as normal menu entry even if it is not selectable.<BR>
726 # @Prompt GrayOut read only menu.
727 gEfiMdeModulePkgTokenSpaceGuid.PcdBrowerGrayOutReadOnlyMenu|FALSE|BOOLEAN|0x00010070
728
729 ## Indicates if recovery from IDE disk will be supported.<BR><BR>
730 # TRUE - Supports recovery from IDE disk.<BR>
731 # FALSE - Does not support recovery from IDE disk.<BR>
732 # @Prompt Enable recovery on IDE disk.
733 gEfiMdeModulePkgTokenSpaceGuid.PcdRecoveryOnIdeDisk|TRUE|BOOLEAN|0x00010060
734
735 ## Indicates if recovery from FAT floppy disk will be supported.<BR><BR>
736 # TRUE - Supports recovery from FAT floppy disk.<BR>
737 # FALSE - Does not support recovery from FAT floppy disk.<BR>
738 # @Prompt Enable recovery on FAT floppy disk.
739 gEfiMdeModulePkgTokenSpaceGuid.PcdRecoveryOnFatFloppyDisk|TRUE|BOOLEAN|0x00010061
740
741 ## Indicates if recovery from data CD will be supported.<BR><BR>
742 # TRUE - Supports recovery from data CD.<BR>
743 # FALSE - Does not support recovery from data CD.<BR>
744 # @Prompt Enable recovery on data CD.
745 gEfiMdeModulePkgTokenSpaceGuid.PcdRecoveryOnDataCD|TRUE|BOOLEAN|0x00010062
746
747 ## Indicates if recovery from FAT USB disk will be supported.<BR><BR>
748 # TRUE - Supports recovery from USB disk.<BR>
749 # FALSE - Does not support recovery from USB disk.<BR>
750 # @Prompt Enable recovery on FAT USB disk.
751 gEfiMdeModulePkgTokenSpaceGuid.PcdRecoveryOnFatUsbDisk|TRUE|BOOLEAN|0x00010063
752
753 ## Indicates if S3 performance data will be supported in ACPI FPDT table.<BR><BR>
754 # TRUE - S3 performance data will be supported in ACPI FPDT table.<BR>
755 # FALSE - S3 performance data will not be supported in ACPI FPDT table.<BR>
756 # @Prompt Enable S3 performance data support.
757 gEfiMdeModulePkgTokenSpaceGuid.PcdFirmwarePerformanceDataTableS3Support|TRUE|BOOLEAN|0x00010064
758
759 ## Indicates if PS2 keyboard does a extended verification during start.
760 # Add this PCD mainly consider the use case of simulator. This PCD maybe set to FALSE for
761 # Extended verification will take some performance. It can be set to FALSE for boot performance.<BR><BR>
762 # TRUE - Turn on PS2 keyboard extended verification.<BR>
763 # FALSE - Turn off PS2 keyboard extended verification.<BR>
764 # @Prompt Turn on PS2 Keyboard Extended Verification
765 gEfiMdeModulePkgTokenSpaceGuid.PcdPs2KbdExtendedVerification|TRUE|BOOLEAN|0x00010072
766
767 ## Indicates if Serial device uses half hand shake.<BR><BR>
768 # TRUE - Serial device uses half hand shake.<BR>
769 # FALSE - Serial device doesn't use half hand shake.<BR>
770 # @Prompt Enable Serial device Half Hand Shake
771 gEfiMdeModulePkgTokenSpaceGuid.PcdSerialUseHalfHandshake|FALSE|BOOLEAN|0x00010073
772
773 ## Indicates if HII data and configuration has been exported.<BR><BR>
774 # Add this PCD mainly consider the use case of simulator. This PCD maybe set to FALSE for
775 # simulator platform because the performance cost for this feature.
776 # TRUE - Export HII data and configuration data.<BR>
777 # FALSE - Does not export HII data and configuration.<BR>
778 # @Prompt Enable export HII data and configuration to be used in OS runtime.
779 gEfiMdeModulePkgTokenSpaceGuid.PcdHiiOsRuntimeSupport|TRUE|BOOLEAN|0x00010074
780
781 ## Indicates if PS2 mouse does a extended verification during start.
782 # Extended verification will take some performance. It can be set to FALSE for boot performance.<BR><BR>
783 # TRUE - Turn on PS2 mouse extended verification. <BR>
784 # FALSE - Turn off PS2 mouse extended verification. <BR>
785 # @Prompt Turn on PS2 Mouse Extended Verification
786 gEfiMdeModulePkgTokenSpaceGuid.PcdPs2MouseExtendedVerification|TRUE|BOOLEAN|0x00010075
787
788 ## Indicates whether 64-bit PCI MMIO BARs should degrade to 32-bit in the presence of an option ROM
789 # On X64 platforms, Option ROMs may contain code that executes in the context of a legacy BIOS (CSM),
790 # which requires that all PCI MMIO BARs are located below 4 GB
791 # TRUE - All PCI MMIO BARs of a device will be located below 4 GB if it has an option ROM
792 # FALSE - PCI MMIO BARs of a device may be located above 4 GB even if it has an option ROM
793 # @Prompt Degrade 64-bit PCI MMIO BARs for legacy BIOS option ROMs
794 gEfiMdeModulePkgTokenSpaceGuid.PcdPciDegradeResourceForOptionRom|TRUE|BOOLEAN|0x0001003a
795
796 [PcdsFeatureFlag.IA32, PcdsFeatureFlag.ARM, PcdsFeatureFlag.AARCH64]
797 gEfiMdeModulePkgTokenSpaceGuid.PcdPciDegradeResourceForOptionRom|FALSE|BOOLEAN|0x0001003a
798
799 [PcdsFeatureFlag.IA32, PcdsFeatureFlag.X64]
800 ## Indicates if DxeIpl should switch to long mode to enter DXE phase.
801 # It is assumed that 64-bit DxeCore is built in firmware if it is true; otherwise 32-bit DxeCore
802 # is built in firmware.<BR><BR>
803 # TRUE - DxeIpl will load a 64-bit DxeCore and switch to long mode to hand over to DxeCore.<BR>
804 # FALSE - DxeIpl will load a 32-bit DxeCore and perform stack switch to hand over to DxeCore.<BR>
805 # @Prompt DxeIpl switch to long mode.
806 gEfiMdeModulePkgTokenSpaceGuid.PcdDxeIplSwitchToLongMode|TRUE|BOOLEAN|0x0001003b
807
808 ## Indicates if DxeIpl should rebuild page tables. This flag only
809 # makes sense in the case where the DxeIpl and the DxeCore are both X64.<BR><BR>
810 # TRUE - DxeIpl will rebuild page tables.<BR>
811 # FALSE - DxeIpl will not rebuild page tables.<BR>
812 # @Prompt DxeIpl rebuild page tables.
813 gEfiMdeModulePkgTokenSpaceGuid.PcdDxeIplBuildPageTables|TRUE|BOOLEAN|0x0001003c
814
815 [PcdsFixedAtBuild]
816 ## Flag of enabling/disabling the feature of Loading Module at Fixed Address.<BR><BR>
817 # 0xFFFFFFFFFFFFFFFF: Enable the feature as fixed offset to TOLM.<BR>
818 # 0: Disable the feature.<BR>
819 # Other Value: Enable the feature as fixed absolute address, and the value is the top memory address.<BR>
820 # @Prompt Enable LMFA feature.
821 # @Expression 0x80000001 | (gEfiMdeModulePkgTokenSpaceGuid.PcdLoadModuleAtFixAddressEnable == 0xFFFFFFFFFFFFFFFF || gEfiMdeModulePkgTokenSpaceGuid.PcdLoadModuleAtFixAddressEnable <= 0x0FFFFFFFFFFFFFFF)
822 gEfiMdeModulePkgTokenSpaceGuid.PcdLoadModuleAtFixAddressEnable|0|UINT64|0x30001015
823
824 ## Progress Code for OS Loader LoadImage start.<BR><BR>
825 # PROGRESS_CODE_OS_LOADER_LOAD = (EFI_SOFTWARE_DXE_BS_DRIVER | (EFI_OEM_SPECIFIC | 0x00000000)) = 0x03058000<BR>
826 # @Prompt Progress Code for OS Loader LoadImage start.
827 # @ValidList 0x80000003 | 0x03058000
828 gEfiMdeModulePkgTokenSpaceGuid.PcdProgressCodeOsLoaderLoad|0x03058000|UINT32|0x30001030
829
830 ## Progress Code for OS Loader StartImage start.<BR><BR>
831 # PROGRESS_CODE_OS_LOADER_START = (EFI_SOFTWARE_DXE_BS_DRIVER | (EFI_OEM_SPECIFIC | 0x00000001)) = 0x03058001<BR>
832 # @Prompt Progress Code for OS Loader StartImage start.
833 # @ValidList 0x80000003 | 0x03058001
834 gEfiMdeModulePkgTokenSpaceGuid.PcdProgressCodeOsLoaderStart|0x03058001|UINT32|0x30001031
835
836 ## Progress Code for S3 Suspend start.<BR><BR>
837 # PROGRESS_CODE_S3_SUSPEND_START = (EFI_SOFTWARE_SMM_DRIVER | (EFI_OEM_SPECIFIC | 0x00000000)) = 0x03078000<BR>
838 # @Prompt Progress Code for S3 Suspend start.
839 # @ValidList 0x80000003 | 0x03078000
840 gEfiMdeModulePkgTokenSpaceGuid.PcdProgressCodeS3SuspendStart|0x03078000|UINT32|0x30001032
841
842 ## Progress Code for S3 Suspend end.<BR><BR>
843 # PROGRESS_CODE_S3_SUSPEND_END = (EFI_SOFTWARE_SMM_DRIVER | (EFI_OEM_SPECIFIC | 0x00000001)) = 0x03078001<BR>
844 # @Prompt Progress Code for S3 Suspend end.
845 # @ValidList 0x80000003 | 0x03078001
846 gEfiMdeModulePkgTokenSpaceGuid.PcdProgressCodeS3SuspendEnd|0x03078001|UINT32|0x30001033
847
848 ## Error Code for SetVariable failure.<BR><BR>
849 # EDKII_ERROR_CODE_SET_VARIABLE = (EFI_SOFTWARE_DXE_BS_DRIVER | (EFI_OEM_SPECIFIC | 0x00000002)) = 0x03058002<BR>
850 # @Prompt Error Code for SetVariable failure.
851 # @ValidList 0x80000006 | 0x03058002
852 gEfiMdeModulePkgTokenSpaceGuid.PcdErrorCodeSetVariable|0x03058002|UINT32|0x30001040
853
854 [PcdsFixedAtBuild, PcdsPatchableInModule]
855 ## Dynamic type PCD can be registered callback function for Pcd setting action.
856 # PcdMaxPeiPcdCallBackNumberPerPcdEntry indicates the maximum number of callback function
857 # for a dynamic PCD used in PEI phase.
858 # @Prompt Max PEI PCD callback number per PCD entry.
859 gEfiMdeModulePkgTokenSpaceGuid.PcdMaxPeiPcdCallBackNumberPerPcdEntry|0x08|UINT32|0x0001000f
860
861 ## VPD type PCD allows a developer to point to an absolute physical address PcdVpdBaseAddress
862 # to store PCD value.
863 # @Prompt VPD base address.
864 gEfiMdeModulePkgTokenSpaceGuid.PcdVpdBaseAddress|0x0|UINT32|0x00010010
865
866 ## Maximum number of FV is supported by PeiCore's dispatching.
867 # @Prompt Maximum number of FV supported by PeiCore.
868 gEfiMdeModulePkgTokenSpaceGuid.PcdPeiCoreMaxFvSupported|6|UINT32|0x00010030
869
870 ## Maximum File count in every FV is supported by PeiCore's dispatching.
871 # PeiCore supported File type includes PEIM, Combined PEIM and FV.
872 # @Prompt Maximum File count per FV supported by PeiCore.
873 gEfiMdeModulePkgTokenSpaceGuid.PcdPeiCoreMaxPeimPerFv|32|UINT32|0x00010031
874
875 ## Maximum stack size for PeiCore.
876 # @Prompt Maximum stack size for PeiCore.
877 gEfiMdeModulePkgTokenSpaceGuid.PcdPeiCoreMaxPeiStackSize|0x20000|UINT32|0x00010032
878
879 ## Maximum PPI count is supported by PeiCore's PPI database.
880 # @Prompt Maximum PPI count supported by PeiCore.
881 gEfiMdeModulePkgTokenSpaceGuid.PcdPeiCoreMaxPpiSupported|64|UINT32|0x00010033
882
883 ## The maximum size of a single non-HwErr type variable.
884 # @Prompt Maximum variable size.
885 gEfiMdeModulePkgTokenSpaceGuid.PcdMaxVariableSize|0x400|UINT32|0x30000003
886
887 ## The maximum size of a single authenticated variable.
888 # The value is 0 as default for compatibility that maximum authenticated variable size is specified by PcdMaxVariableSize.
889 # @Prompt Maximum authenticated variable size.
890 gEfiMdeModulePkgTokenSpaceGuid.PcdMaxAuthVariableSize|0x00|UINT32|0x30000009
891
892 ## The maximum size of single hardware error record variable.<BR><BR>
893 # In IA32/X64 platforms, this value should be larger than 1KB.<BR>
894 # In IA64 platforms, this value should be larger than 128KB.<BR>
895 # @Prompt Maximum HwErr variable size.
896 gEfiMdeModulePkgTokenSpaceGuid.PcdMaxHardwareErrorVariableSize|0x8000|UINT32|0x30000004
897
898 ## The size of reserved HwErr variable space. Note that this value must be less than (PcdFlashNvStorageVariableSize - EFI_FIRMWARE_VOLUME_HEADER.HeaderLength - sizeof (VARIABLE_STORE_HEADER)).
899 # In EdkII implementation, HwErr type variable is stored with common non-volatile variables in the same NV region.
900 # so the platform integrator should ensure this value is less than (PcdFlashNvStorageVariableSize - EFI_FIRMWARE_VOLUME_HEADER.HeaderLength - sizeof (VARIABLE_STORE_HEADER)).
901 # this value is used to guarantee the space of HwErr type variable and not populated by common variable.
902 # @Prompt HwErr variable storage size.
903 gEfiMdeModulePkgTokenSpaceGuid.PcdHwErrStorageSize|0x0000|UINT32|0x30000006
904
905 ## The size of maximum user NV variable space.<BR><BR>
906 # Note that this value must be less than (PcdFlashNvStorageVariableSize - EFI_FIRMWARE_VOLUME_HEADER.HeaderLength - sizeof (VARIABLE_STORE_HEADER) - PcdHwErrStorageSize).<BR>
907 # If the value is 0, it means user variable share the same NV storage with system variable,
908 # this is designed to keep the compatibility for the platform that does not allocate special region for user variable.<BR>
909 # If the value is non-0, the below 4 types of variables will be regarded as System Variable after EndOfDxe, their property could be got by VarCheck protocol,
910 # otherwise the variable will be regarded as user variable.<BR>
911 # 1) UEFI defined variables (gEfiGlobalVariableGuid and gEfiImageSecurityDatabaseGuid(auth variable) variables at least).<BR>
912 # 2) Variables managed by Variable driver internally.<BR>
913 # 3) Variables need to be locked, they MUST be set by VariableLock protocol.<BR>
914 # 4) Important variables during platform boot, their property SHOULD be set by VarCheck protocol.<BR>
915 # The PCD is used to guarantee the space of system variable and not populated by user variable.<BR>
916 # @Prompt Maximum user NV variable space size.
917 gEfiMdeModulePkgTokenSpaceGuid.PcdMaxUserNvVariableSpaceSize|0x00|UINT32|0x00000009
918
919 ## The size of NV variable space reserved at UEFI boottime.<BR><BR>
920 # Note that this value must be less than (PcdFlashNvStorageVariableSize - EFI_FIRMWARE_VOLUME_HEADER.HeaderLength - sizeof (VARIABLE_STORE_HEADER) - PcdHwErrStorageSize).<BR>
921 # In EdkII implementation, variable driver can reserved some NV storage region for boottime settings.
922 # So at UEFI runtime, the variable service consumer can not exhaust full NV storage region.<BR>
923 # Then the common NV variable space size at boottime will be
924 # (PcdFlashNvStorageVariableSize - EFI_FIRMWARE_VOLUME_HEADER.HeaderLength - sizeof (VARIABLE_STORE_HEADER) - PcdHwErrStorageSize),<BR>
925 # and the common NV variable space size at runtime will be
926 # (PcdFlashNvStorageVariableSize - EFI_FIRMWARE_VOLUME_HEADER.HeaderLength - sizeof (VARIABLE_STORE_HEADER) - PcdHwErrStorageSize) - PcdBoottimeReservedNvVariableSpaceSize.<BR>
927 # @Prompt Boottime reserved NV variable space size.
928 gEfiMdeModulePkgTokenSpaceGuid.PcdBoottimeReservedNvVariableSpaceSize|0x00|UINT32|0x30000007
929
930 ## Reclaim variable space at EndOfDxe.<BR><BR>
931 # The value is FALSE as default for compatibility that variable driver tries to reclaim variable space at ReadyToBoot event.<BR>
932 # If the value is set to TRUE, variable driver tries to reclaim variable space at EndOfDxe event.<BR>
933 # @Prompt Reclaim variable space at EndOfDxe.
934 gEfiMdeModulePkgTokenSpaceGuid.PcdReclaimVariableSpaceAtEndOfDxe|FALSE|BOOLEAN|0x30000008
935
936 ## The size of volatile buffer. This buffer is used to store VOLATILE attribute variables.
937 # @Prompt Variable storage size.
938 gEfiMdeModulePkgTokenSpaceGuid.PcdVariableStoreSize|0x10000|UINT32|0x30000005
939
940 ## FFS filename to find the ACPI tables.
941 # @Prompt FFS name of ACPI tables storage.
942 gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiTableStorageFile|{ 0x25, 0x4e, 0x37, 0x7e, 0x01, 0x8e, 0xee, 0x4f, 0x87, 0xf2, 0x39, 0xc, 0x23, 0xc6, 0x6, 0xcd }|VOID*|0x30000016
943
944 ## FFS filename to find the capsule coalesce image.
945 # @Prompt FFS name of capsule coalesce image.
946 gEfiMdeModulePkgTokenSpaceGuid.PcdCapsuleCoalesceFile|{ 0xA6, 0xE4, 0xFD, 0xF7, 0x4C, 0x29, 0x3c, 0x49, 0xB5, 0x0F, 0x97, 0x34, 0x55, 0x3B, 0xB7, 0x57 }|VOID*|0x30000017
947
948 ## Maximum number of performance log entries during PEI phase.
949 # Use PcdMaxPeiPerformanceLogEntries16 if the number of entries required is
950 # more than 255.
951 # @Prompt Maximum number of PEI performance log entries.
952 gEfiMdeModulePkgTokenSpaceGuid.PcdMaxPeiPerformanceLogEntries|40|UINT8|0x0001002f
953
954 ## Maximum number of performance log entries during PEI phase.
955 # If set to 0, then PcdMaxPeiPerformanceLogEntries determines the number of
956 # entries. If greater than 0, then this PCD determines the number of entries,
957 # and PcdMaxPeiPerformanceLogEntries is ignored.
958 # @Prompt Maximum number of PEI performance log entries.
959 gEfiMdeModulePkgTokenSpaceGuid.PcdMaxPeiPerformanceLogEntries16|0|UINT16|0x00010035
960
961 ## RTC Update Timeout Value(microsecond).
962 # @Prompt RTC Update Timeout Value.
963 gEfiMdeModulePkgTokenSpaceGuid.PcdRealTimeClockUpdateTimeout|100000|UINT32|0x00010034
964
965 ## Indicates the 16550 serial port registers are in MMIO space, or in I/O space. Default is I/O space.<BR><BR>
966 # TRUE - 16550 serial port registers are in MMIO space.<BR>
967 # FALSE - 16550 serial port registers are in I/O space.<BR>
968 # @Prompt Serial port registers use MMIO.
969 gEfiMdeModulePkgTokenSpaceGuid.PcdSerialUseMmio|FALSE|BOOLEAN|0x00020000
970
971 ## Indicates if the 16550 serial port hardware flow control will be enabled. Default is FALSE.<BR><BR>
972 # TRUE - 16550 serial port hardware flow control will be enabled.<BR>
973 # FALSE - 16550 serial port hardware flow control will be disabled.<BR>
974 # @Prompt Enable serial port hardware flow control.
975 gEfiMdeModulePkgTokenSpaceGuid.PcdSerialUseHardwareFlowControl|FALSE|BOOLEAN|0x00020001
976
977 ## Indicates if the 16550 serial Tx operations will be blocked if DSR is not asserted (no cable). Default is FALSE.
978 # This PCD is ignored if PcdSerialUseHardwareFlowControl is FALSE.<BR><BR>
979 # TRUE - 16550 serial Tx operations will be blocked if DSR is not asserted.<BR>
980 # FALSE - 16550 serial Tx operations will not be blocked if DSR is not asserted.<BR>
981 # @Prompt Enable serial port cable detetion.
982 gEfiMdeModulePkgTokenSpaceGuid.PcdSerialDetectCable|FALSE|BOOLEAN|0x00020006
983
984 ## Base address of 16550 serial port registers in MMIO or I/O space. Default is 0x3F8.
985 # @Prompt Base address of serial port registers.
986 gEfiMdeModulePkgTokenSpaceGuid.PcdSerialRegisterBase|0x03F8|UINT64|0x00020002
987
988 ## Baud rate for the 16550 serial port. Default is 115200 baud.
989 # @Prompt Baud rate for serial port.
990 # @ValidList 0x80000001 | 921600, 460800, 230400, 115200, 57600, 38400, 19200, 9600, 7200, 4800, 3600, 2400, 2000, 1800, 1200, 600, 300, 150, 134, 110, 75, 50
991 gEfiMdeModulePkgTokenSpaceGuid.PcdSerialBaudRate|115200|UINT32|0x00020003
992
993 ## Line Control Register (LCR) for the 16550 serial port. This encodes data bits, parity, and stop bits.<BR><BR>
994 # BIT1..BIT0 - Data bits. 00b = 5 bits, 01b = 6 bits, 10b = 7 bits, 11b = 8 bits<BR>
995 # BIT2 - Stop Bits. 0 = 1 stop bit. 1 = 1.5 stop bits if 5 data bits selected, otherwise 2 stop bits.<BR>
996 # BIT5..BIT3 - Parity. xx0b = No Parity, 001b = Odd Parity, 011b = Even Parity, 101b = Mark Parity, 111b=Stick Parity<BR>
997 # BIT7..BIT6 - Reserved. Must be 0.<BR>
998 #
999 # Default is No Parity, 8 Data Bits, 1 Stop Bit.<BR>
1000 # @Prompt Serial port Line Control settings.
1001 # @Expression 0x80000002 | (gEfiMdeModulePkgTokenSpaceGuid.PcdSerialLineControl & 0xC0) == 0
1002 gEfiMdeModulePkgTokenSpaceGuid.PcdSerialLineControl|0x03|UINT8|0x00020004
1003
1004 ## FIFO Control Register (FCR) for the 16550 serial port.<BR><BR>
1005 # BIT0 - FIFO Enable. 0 = Disable FIFOs. 1 = Enable FIFOs.<BR>
1006 # BIT1 - Clear receive FIFO. 1 = Clear FIFO.<BR>
1007 # BIT2 - Clear transmit FIFO. 1 = Clear FIFO.<BR>
1008 # BIT4..BIT3 - Reserved. Must be 0.<BR>
1009 # BIT5 - Enable 64-byte FIFO. 0 = Disable 64-byte FIFO. 1 = Enable 64-byte FIFO<BR>
1010 # BIT7..BIT6 - Reserved. Must be 0.<BR>
1011 #
1012 # Default is to enable and clear all FIFOs.<BR>
1013 # @Prompt Serial port FIFO Control settings.
1014 # @Expression 0x80000002 | (gEfiMdeModulePkgTokenSpaceGuid.PcdSerialFifoControl & 0xD8) == 0
1015 gEfiMdeModulePkgTokenSpaceGuid.PcdSerialFifoControl|0x07|UINT8|0x00020005
1016
1017 ## This setting can override the default TFTP block size. A value of 0 computes
1018 # the default from MTU information. A non-zero value will be used as block size
1019 # in bytes.
1020 # @Prompt TFTP block size.
1021 gEfiMdeModulePkgTokenSpaceGuid.PcdTftpBlockSize|0x0|UINT64|0x30001026
1022
1023 ## Maximum address that the DXE Core will allocate the EFI_SYSTEM_TABLE_POINTER
1024 # structure. The default value for this PCD is 0, which means that the DXE Core
1025 # will allocate the buffer from the EFI_SYSTEM_TABLE_POINTER structure on a 4MB
1026 # boundary as close to the top of memory as feasible. If this PCD is set to a
1027 # value other than 0, then the DXE Core will first attempt to allocate the
1028 # EFI_SYSTEM_TABLE_POINTER structure on a 4MB boundary below the address specified
1029 # by this PCD, and if that allocation fails, retry the allocation on a 4MB
1030 # boundary as close to the top of memory as feasible.
1031 # @Prompt Maximum Efi System Table Pointer address.
1032 gEfiMdeModulePkgTokenSpaceGuid.PcdMaxEfiSystemTablePointerAddress|0x0|UINT64|0x30001027
1033
1034 ## Indicates if to shadow PEIM on S3 boot path after memory is ready.<BR><BR>
1035 # TRUE - Shadow PEIM on S3 boot path after memory is ready.<BR>
1036 # FALSE - Not shadow PEIM on S3 boot path after memory is ready.<BR>
1037 # @Prompt Shadow Peim On S3 Boot.
1038 gEfiMdeModulePkgTokenSpaceGuid.PcdShadowPeimOnS3Boot|FALSE|BOOLEAN|0x30001028
1039
1040 ## Indicates if to shadow PEIM and PeiCore after memory is ready.<BR><BR>
1041 # This PCD is used on other boot path except for S3 boot.
1042 # TRUE - Shadow PEIM and PeiCore after memory is ready.<BR>
1043 # FALSE - Not shadow PEIM after memory is ready.<BR>
1044 # @Prompt Shadow Peim and PeiCore on boot
1045 gEfiMdeModulePkgTokenSpaceGuid.PcdShadowPeimOnBoot|TRUE|BOOLEAN|0x30001029
1046
1047 ## The mask is used to control memory profile behavior.<BR><BR>
1048 # BIT0 - Enable UEFI memory profile.<BR>
1049 # BIT1 - Enable SMRAM profile.<BR>
1050 # BIT7 - Disable recording at the start.<BR>
1051 # @Prompt Memory Profile Property.
1052 # @Expression 0x80000002 | (gEfiMdeModulePkgTokenSpaceGuid.PcdMemoryProfilePropertyMask & 0x7C) == 0
1053 gEfiMdeModulePkgTokenSpaceGuid.PcdMemoryProfilePropertyMask|0x0|UINT8|0x30001041
1054
1055 ## The mask is used to control SmiHandlerProfile behavior.<BR><BR>
1056 # BIT0 - Enable SmiHandlerProfile.<BR>
1057 # @Prompt SmiHandlerProfile Property.
1058 # @Expression 0x80000002 | (gEfiMdeModulePkgTokenSpaceGuid.PcdSmiHandlerProfilePropertyMask & 0xFE) == 0
1059 gEfiMdeModulePkgTokenSpaceGuid.PcdSmiHandlerProfilePropertyMask|0|UINT8|0x00000108
1060
1061 ## This flag is to control which memory types of alloc info will be recorded by DxeCore & SmmCore.<BR><BR>
1062 # For SmmCore, only EfiRuntimeServicesCode and EfiRuntimeServicesData are valid.<BR>
1063 #
1064 # Below is bit mask for this PCD: (Order is same as UEFI spec)<BR>
1065 # EfiReservedMemoryType 0x0001<BR>
1066 # EfiLoaderCode 0x0002<BR>
1067 # EfiLoaderData 0x0004<BR>
1068 # EfiBootServicesCode 0x0008<BR>
1069 # EfiBootServicesData 0x0010<BR>
1070 # EfiRuntimeServicesCode 0x0020<BR>
1071 # EfiRuntimeServicesData 0x0040<BR>
1072 # EfiConventionalMemory 0x0080<BR>
1073 # EfiUnusableMemory 0x0100<BR>
1074 # EfiACPIReclaimMemory 0x0200<BR>
1075 # EfiACPIMemoryNVS 0x0400<BR>
1076 # EfiMemoryMappedIO 0x0800<BR>
1077 # EfiMemoryMappedIOPortSpace 0x1000<BR>
1078 # EfiPalCode 0x2000<BR>
1079 # EfiPersistentMemory 0x4000<BR>
1080 # OEM Reserved 0x4000000000000000<BR>
1081 # OS Reserved 0x8000000000000000<BR>
1082 #
1083 # e.g. Reserved+ACPINvs+ACPIReclaim+RuntimeCode+RuntimeData are needed, 0x661 should be used.<BR>
1084 #
1085 # @Prompt Memory profile memory type.
1086 gEfiMdeModulePkgTokenSpaceGuid.PcdMemoryProfileMemoryType|0x0|UINT64|0x30001042
1087
1088 ## This PCD is to control which drivers need memory profile data.<BR><BR>
1089 # For example:<BR>
1090 # One image only (Shell):<BR>
1091 # Header GUID<BR>
1092 # {0x04, 0x06, 0x14, 0x00, 0x83, 0xA5, 0x04, 0x7C, 0x3E, 0x9E, 0x1C, 0x4F, 0xAD, 0x65, 0xE0, 0x52, 0x68, 0xD0, 0xB4, 0xD1,<BR>
1093 # 0x7F, 0xFF, 0x04, 0x00}<BR>
1094 # Two or more images (Shell + WinNtSimpleFileSystem):<BR>
1095 # {0x04, 0x06, 0x14, 0x00, 0x83, 0xA5, 0x04, 0x7C, 0x3E, 0x9E, 0x1C, 0x4F, 0xAD, 0x65, 0xE0, 0x52, 0x68, 0xD0, 0xB4, 0xD1,<BR>
1096 # 0x7F, 0x01, 0x04, 0x00,<BR>
1097 # 0x04, 0x06, 0x14, 0x00, 0x8B, 0xE1, 0x25, 0x9C, 0xBA, 0x76, 0xDA, 0x43, 0xA1, 0x32, 0xDB, 0xB0, 0x99, 0x7C, 0xEF, 0xEF,<BR>
1098 # 0x7F, 0xFF, 0x04, 0x00}<BR>
1099 # @Prompt Memory profile driver path.
1100 gEfiMdeModulePkgTokenSpaceGuid.PcdMemoryProfileDriverPath|{0x0}|VOID*|0x00001043
1101
1102 ## Set image protection policy. The policy is bitwise.
1103 # If a bit is set, the image will be protected by DxeCore if it is aligned.
1104 # The code section becomes read-only, and the data section becomes non-executable.
1105 # If a bit is clear, the image will not be protected.<BR><BR>
1106 # BIT0 - Image from unknown device. <BR>
1107 # BIT1 - Image from firmware volume.<BR>
1108 # @Prompt Set image protection policy.
1109 # @ValidRange 0x80000002 | 0x00000000 - 0x0000001F
1110 gEfiMdeModulePkgTokenSpaceGuid.PcdImageProtectionPolicy|0x00000002|UINT32|0x00001047
1111
1112 ## Set DXE memory protection policy. The policy is bitwise.
1113 # If a bit is set, memory regions of the associated type will be mapped
1114 # non-executable.<BR><BR>
1115 #
1116 # Below is bit mask for this PCD: (Order is same as UEFI spec)<BR>
1117 # EfiReservedMemoryType 0x0001<BR>
1118 # EfiLoaderCode 0x0002<BR>
1119 # EfiLoaderData 0x0004<BR>
1120 # EfiBootServicesCode 0x0008<BR>
1121 # EfiBootServicesData 0x0010<BR>
1122 # EfiRuntimeServicesCode 0x0020<BR>
1123 # EfiRuntimeServicesData 0x0040<BR>
1124 # EfiConventionalMemory 0x0080<BR>
1125 # EfiUnusableMemory 0x0100<BR>
1126 # EfiACPIReclaimMemory 0x0200<BR>
1127 # EfiACPIMemoryNVS 0x0400<BR>
1128 # EfiMemoryMappedIO 0x0800<BR>
1129 # EfiMemoryMappedIOPortSpace 0x1000<BR>
1130 # EfiPalCode 0x2000<BR>
1131 # EfiPersistentMemory 0x4000<BR>
1132 # OEM Reserved 0x4000000000000000<BR>
1133 # OS Reserved 0x8000000000000000<BR>
1134 #
1135 # NOTE: User must NOT set NX protection for EfiLoaderCode / EfiBootServicesCode / EfiRuntimeServicesCode. <BR>
1136 # User MUST set the same NX protection for EfiBootServicesData and EfiConventionalMemory. <BR>
1137 #
1138 # e.g. 0x7FD5 can be used for all memory except Code. <BR>
1139 # e.g. 0x7BD4 can be used for all memory except Code and ACPINVS/Reserved. <BR>
1140 #
1141 # @Prompt Set DXE memory protection policy.
1142 gEfiMdeModulePkgTokenSpaceGuid.PcdDxeNxMemoryProtectionPolicy|0x0000000|UINT64|0x00001048
1143
1144 ## PCI Serial Device Info. It is an array of Device, Function, and Power Management
1145 # information that describes the path that contains zero or more PCI to PCI briges
1146 # followed by a PCI serial device. Each array entry is 4-bytes in length. The
1147 # first byte is the PCI Device Number, then second byte is the PCI Function Number,
1148 # and the last two bytes are the offset to the PCI power management capabilities
1149 # register used to manage the D0-D3 states. If a PCI power management capabilities
1150 # register is not present, then the last two bytes in the offset is set to 0. The
1151 # array is terminated by an array entry with a PCI Device Number of 0xFF. For a
1152 # non-PCI fixed address serial device, such as an ISA serial device, the value is 0xFF.
1153 # @Prompt Pci Serial Device Info
1154 gEfiMdeModulePkgTokenSpaceGuid.PcdSerialPciDeviceInfo|{0xFF}|VOID*|0x00010067
1155
1156 ## PCI Serial Parameters. It is an array of VendorID, DeviceID, ClockRate, Offset,
1157 # BarIndex, RegisterStride, ReceiveFifoDepth, TransmitFifoDepth information that
1158 # describes the parameters of special PCI serial devices.
1159 # Each array entry is 24-byte in length. The array is terminated
1160 # by an array entry with a PCI Vendor ID of 0xFFFF. If a platform only contains a
1161 # standard 16550 PCI serial device whose class code is 7/0/2, the value is 0xFFFF.
1162 # The C style structure is defined as below:<BR>
1163 # typedef struct {<BR>
1164 # UINT16 VendorId; ///< Vendor ID to match the PCI device. The value 0xFFFF terminates the list of entries.<BR>
1165 # UINT16 DeviceId; ///< Device ID to match the PCI device.<BR>
1166 # UINT32 ClockRate; ///< UART clock rate. Set to 0 for default clock rate of 1843200 Hz.<BR>
1167 # UINT64 Offset; ///< The byte offset into to the BAR.<BR>
1168 # UINT8 BarIndex; ///< Which BAR to get the UART base address.<BR>
1169 # UINT8 RegisterStride; ///< UART register stride in bytes. Set to 0 for default register stride of 1 byte.<BR>
1170 # UINT16 ReceiveFifoDepth; ///< UART receive FIFO depth in bytes. Set to 0 for a default FIFO depth of 16 bytes.<BR>
1171 # UINT16 TransmitFifoDepth; ///< UART transmit FIFO depth in bytes. Set to 0 for a default FIFO depth of 16 bytes.<BR>
1172 # UINT8 Reserved[2];<BR>
1173 # } PCI_SERIAL_PARAMETER;<BR>
1174 # It contains zero or more instances of the above structure.<BR>
1175 # For example, if a PCI device contains two UARTs, PcdPciSerialParameters needs
1176 # to contain two instances of the above structure, with the VendorId and DeviceId
1177 # equals to the Device ID and Vendor ID of the device; If the PCI device uses the
1178 # first two BARs to support two UARTs, BarIndex of first instance equals to 0 and
1179 # BarIndex of second one equals to 1; If the PCI device uses the first BAR to
1180 # support both UARTs, BarIndex of both instance equals to 0, Offset of first
1181 # instance equals to 0 and Offset of second one equals to a value bigger than or
1182 # equal to 8.<BR>
1183 # For certain UART whose register needs to be accessed in DWORD aligned address,
1184 # RegisterStride equals to 4.
1185 # @Prompt Pci Serial Parameters
1186 gEfiMdeModulePkgTokenSpaceGuid.PcdPciSerialParameters|{0xFF, 0xFF}|VOID*|0x00010071
1187
1188 ## Serial Port Extended Transmit FIFO Size. The default is 64 bytes.
1189 # @Prompt Serial Port Extended Transmit FIFO Size in Bytes
1190 gEfiMdeModulePkgTokenSpaceGuid.PcdSerialExtendedTxFifoSize|64|UINT32|0x00010068
1191
1192 ## This PCD points to the file name GUID of the BootManagerMenuApp
1193 # Platform can customize the PCD to point to different application for Boot Manager Menu
1194 # @Prompt Boot Manager Menu File
1195 gEfiMdeModulePkgTokenSpaceGuid.PcdBootManagerMenuFile|{ 0xdc, 0x5b, 0xc2, 0xee, 0xf2, 0x67, 0x95, 0x4d, 0xb1, 0xd5, 0xf8, 0x1b, 0x20, 0x39, 0xd1, 0x1d }|VOID*|0x0001006b
1196
1197 ## This PCD points to the formset GUID of the driver health management form
1198 # The form will be popped up by BDS core when there are Configuration Required driver health intances.
1199 # Platform can customize the PCD to point to different formset.
1200 # @Prompt Driver Health Management Form
1201 gEfiMdeModulePkgTokenSpaceGuid.PcdDriverHealthConfigureForm|{ 0xf4, 0xd9, 0x96, 0x42, 0xfc, 0xf6, 0xde, 0x4d, 0x86, 0x85, 0x8c, 0xe2, 0xd7, 0x9d, 0x90, 0xf0 }|VOID*|0x0001006c
1202
1203 ## The number of bytes between registers in serial device. The default is 1 byte.
1204 # @Prompt Serial Port Register Stride in Bytes
1205 gEfiMdeModulePkgTokenSpaceGuid.PcdSerialRegisterStride|1|UINT32|0x0001006d
1206
1207 ## This PCD to include the driver guid of VFR drivers for VarCheckHiiBin generation.<BR><BR>
1208 # Default is gZeroGuid that means no VFR driver will be parsed for VarCheckHiiBin generation.<BR>
1209 # If it is set to an all FFs GUID, it means all modules in all FVs will be parsed for VarCheckHiiBin generation.<BR>
1210 # @Prompt Driver guid array of VFR drivers for VarCheckHiiBin generation.
1211 gEfiMdeModulePkgTokenSpaceGuid.PcdVarCheckVfrDriverGuidArray|{ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }|VOID*|0x3000103A
1212
1213 ## Indicates which ACPI versions are targeted by the ACPI tables exposed to the OS
1214 # These values are aligned with the definitions in MdePkg/Include/Protocol/AcpiSystemDescriptionTable.h
1215 # BIT 1 - EFI_ACPI_TABLE_VERSION_1_0B.<BR>
1216 # BIT 2 - EFI_ACPI_TABLE_VERSION_2_0.<BR>
1217 # BIT 3 - EFI_ACPI_TABLE_VERSION_3_0.<BR>
1218 # BIT 4 - EFI_ACPI_TABLE_VERSION_4_0.<BR>
1219 # BIT 5 - EFI_ACPI_TABLE_VERSION_5_0.<BR>
1220 # @Prompt Exposed ACPI table versions.
1221 gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiExposedTableVersions|0x3E|UINT32|0x0001004c
1222
1223 ## This PCD defines the MAX repair count.
1224 # The default value is 0 that means infinite.
1225 # @Prompt MAX repair count
1226 gEfiMdeModulePkgTokenSpaceGuid.PcdMaxRepairCount|0x00|UINT32|0x00010076
1227
1228 ## Status Code for Capsule subclass definitions.<BR><BR>
1229 # EFI_OEM_SPECIFIC_SUBCLASS_CAPSULE = 0x00810000<BR>
1230 # NOTE: The default value of this PCD may collide with other OEM specific status codes.
1231 # Override the value of this PCD in the platform DSC file as needed.
1232 # @Prompt Status Code for Capsule subclass definitions
1233 # @ValidList 0x80000003 | 0x00810000
1234 gEfiMdeModulePkgTokenSpaceGuid.PcdStatusCodeSubClassCapsule|0x00810000|UINT32|0x00000100
1235
1236 ## Status Code for Capsule Process Begin.<BR><BR>
1237 # EFI_CAPSULE_PROCESS_CAPSULES_BEGIN = (EFI_OEM_SPECIFIC | 0x00000001) = 0x00008001<BR>
1238 # NOTE: The default value of this PCD may collide with other OEM specific status codes.
1239 # Override the value of this PCD in the platform DSC file as needed.
1240 # @Prompt Status Code for Capsule Process Begin
1241 # @ValidList 0x80000003 | 0x00008001
1242 gEfiMdeModulePkgTokenSpaceGuid.PcdCapsuleStatusCodeProcessCapsulesBegin|0x00008001|UINT32|0x00000101
1243
1244 ## Status Code for Capsule Process End.<BR><BR>
1245 # EFI_CAPSULE_PROCESS_CAPSULES_END = (EFI_OEM_SPECIFIC | 0x00000002) = 0x00008002<BR>
1246 # NOTE: The default value of this PCD may collide with other OEM specific status codes.
1247 # Override the value of this PCD in the platform DSC file as needed.
1248 # @Prompt Status Code for Capsule Process End
1249 # @ValidList 0x80000003 | 0x00008002
1250 gEfiMdeModulePkgTokenSpaceGuid.PcdCapsuleStatusCodeProcessCapsulesEnd|0x00008002|UINT32|0x00000102
1251
1252 ## Status Code for Capsule Process Updating Firmware.<BR><BR>
1253 # EFI_CAPSULE_UPDATING_FIRMWARE = (EFI_OEM_SPECIFIC | 0x00000003) = 0x00008003<BR>
1254 # NOTE: The default value of this PCD may collide with other OEM specific status codes.
1255 # Override the value of this PCD in the platform DSC file as needed.
1256 # @Prompt Status Code for Capsule Process Updating Firmware
1257 # @ValidList 0x80000003 | 0x00008003
1258 gEfiMdeModulePkgTokenSpaceGuid.PcdCapsuleStatusCodeUpdatingFirmware|0x00008003|UINT32|0x00000103
1259
1260 ## Status Code for Capsule Process Update Firmware Success.<BR><BR>
1261 # EFI_CAPSULE_UPDATE_FIRMWARE_SUCCESS = (EFI_OEM_SPECIFIC | 0x00000004) = 0x00008004<BR>
1262 # NOTE: The default value of this PCD may collide with other OEM specific status codes.
1263 # Override the value of this PCD in the platform DSC file as needed.
1264 # @Prompt Status Code for Capsule Process Update Firmware Success
1265 # @ValidList 0x80000003 | 0x00008004
1266 gEfiMdeModulePkgTokenSpaceGuid.PcdCapsuleStatusCodeUpdateFirmwareSuccess|0x00008004|UINT32|0x00000104
1267
1268 ## Status Code for Capsule Process Update Firmware Failed.<BR><BR>
1269 # EFI_CAPSULE_UPDATE_FIRMWARE_FAILED = (EFI_OEM_SPECIFIC | 0x00000005) = 0x00008005<BR>
1270 # NOTE: The default value of this PCD may collide with other OEM specific status codes.
1271 # Override the value of this PCD in the platform DSC file as needed.
1272 # @Prompt Status Code for Capsule Process Update Firmware Failed
1273 # @ValidList 0x80000003 | 0x00008005
1274 gEfiMdeModulePkgTokenSpaceGuid.PcdCapsuleStatusCodeUpdateFirmwareFailed|0x00008005|UINT32|0x00000105
1275
1276 ## Status Code for Capsule Resetting System.<BR><BR>
1277 # EFI_CAPSULE_RESETTING_SYSTEM = (EFI_OEM_SPECIFIC | 0x00000006) = 0x00008006<BR>
1278 # NOTE: The default value of this PCD may collide with other OEM specific status codes.
1279 # Override the value of this PCD in the platform DSC file as needed.
1280 # @Prompt Status Code for Capsule Resetting System
1281 # @ValidList 0x80000003 | 0x00008006
1282 gEfiMdeModulePkgTokenSpaceGuid.PcdCapsuleStatusCodeResettingSystem|0x00008006|UINT32|0x00000106
1283
1284 ## CapsuleMax value in capsule report variable.
1285 # @Prompt CapsuleMax value in capsule report variable.
1286 gEfiMdeModulePkgTokenSpaceGuid.PcdCapsuleMax|0xFFFF|UINT16|0x00000107
1287
1288 [PcdsPatchableInModule, PcdsDynamic, PcdsDynamicEx]
1289 ## This PCD defines the Console output row. The default value is 25 according to UEFI spec.
1290 # This PCD could be set to 0 then console output would be at max column and max row.
1291 # @Prompt Console output row.
1292 gEfiMdeModulePkgTokenSpaceGuid.PcdConOutRow|25|UINT32|0x40000006
1293
1294 ## This PCD defines the Console output column. The default value is 80 according to UEFI spec.
1295 # This PCD could be set to 0 then console output would be at max column and max row.
1296 # @Prompt Console output column.
1297 gEfiMdeModulePkgTokenSpaceGuid.PcdConOutColumn|80|UINT32|0x40000007
1298
1299 ## This PCD defines the video horizontal resolution.
1300 # If this PCD is set to 0 then video resolution would be at highest resolution.
1301 # @Prompt Video horizontal resolution.
1302 gEfiMdeModulePkgTokenSpaceGuid.PcdVideoHorizontalResolution|800|UINT32|0x40000009
1303
1304 ## This PCD defines the video vertical resolution.
1305 # If this PCD is set to 0 then video resolution would be at highest resolution.
1306 # @Prompt Video vertical resolution.
1307 gEfiMdeModulePkgTokenSpaceGuid.PcdVideoVerticalResolution|600|UINT32|0x4000000a
1308
1309 # The 4 PCDs below are used to specify the video resolution and text mode of text setup.
1310 # To make text setup work in this resolution, PcdVideoHorizontalResolution, PcdVideoVerticalResolution,
1311 # PcdConOutColumn and PcdConOutRow should be created as PcdsDynamic or PcdsDynamicEx in platform DSC file.
1312 # Then BDS setup will update these PCDs defined in MdeModulePkg.dec and reconnect console drivers
1313 # (GraphicsConsole, Terminal, Consplitter) to make the video resolution and text mode work
1314 # for text setup.
1315
1316 ## Specify the video horizontal resolution of text setup.
1317 # @Prompt Video Horizontal Resolution of Text Setup
1318 gEfiMdeModulePkgTokenSpaceGuid.PcdSetupVideoHorizontalResolution|800|UINT32|0x4000000b
1319
1320 ## Specify the video vertical resolution of text setup.
1321 # @Prompt Video Vertical Resolution of Text Setup
1322 gEfiMdeModulePkgTokenSpaceGuid.PcdSetupVideoVerticalResolution|600|UINT32|0x4000000c
1323
1324 ## Specify the console output column of text setup.
1325 # @Prompt Console Output Column of Text Setup
1326 gEfiMdeModulePkgTokenSpaceGuid.PcdSetupConOutColumn|80|UINT32|0x4000000d
1327
1328 ## Specify the console output row of text setup.
1329 # @Prompt Console Output Row of Text Setup
1330 gEfiMdeModulePkgTokenSpaceGuid.PcdSetupConOutRow|25|UINT32|0x4000000e
1331
1332 [PcdsFixedAtBuild, PcdsPatchableInModule, PcdsDynamic, PcdsDynamicEx]
1333 ## UART clock frequency is for the baud rate configuration.
1334 # @Prompt Serial Port Clock Rate.
1335 gEfiMdeModulePkgTokenSpaceGuid.PcdSerialClockRate|1843200|UINT32|0x00010066
1336
1337 ## This PCD points to the front page formset GUID
1338 # Compare the FormsetGuid or ClassGuid with this PCD value can detect whether in front page
1339 # @Prompt Front Page Formset.
1340 gEfiMdeModulePkgTokenSpaceGuid.PcdFrontPageFormSetGuid|{ 0xbc, 0x30, 0x0c, 0x9e,0x06, 0x3f, 0xa6, 0x4b, 0x82, 0x88, 0x9, 0x17, 0x9b, 0x85, 0x5d, 0xbe }|VOID*|0x0001006e
1341
1342 ## Base address of the NV variable range in flash device.
1343 # @Prompt Base address of flash NV variable range.
1344 gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableBase|0x0|UINT32|0x30000001
1345
1346 ## Size of the NV variable range. Note that this value should less than or equal to PcdFlashNvStorageFtwSpareSize.
1347 # The root cause is that variable driver will use FTW protocol to reclaim variable region.
1348 # If the length of variable region is larger than FTW spare size, it means the whole variable region can not
1349 # be reflushed through the manner of fault tolerant write.
1350 # @Prompt Size of flash NV variable range.
1351 gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableSize|0x0|UINT32|0x30000002
1352
1353 ## Base address of the FTW spare block range in flash device. Note that this value should be block size aligned.
1354 # @Prompt Base address of flash FTW spare block range.
1355 gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareBase|0x0|UINT32|0x30000013
1356
1357 ## Size of the FTW spare block range. Note that this value should larger than PcdFlashNvStorageVariableSize and block size aligned.
1358 # The root cause is that variable driver will use FTW protocol to reclaim variable region.
1359 # If the length of variable region is larger than FTW spare size, it means the whole variable region can not
1360 # be reflushed through the manner of fault tolerant write.
1361 # @Prompt Size of flash FTW spare block range.
1362 gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareSize|0x0|UINT32|0x30000014
1363
1364 ## Base address of the FTW working block range in flash device.
1365 # If PcdFlashNvStorageFtwWorkingSize is larger than one block size, this value should be block size aligned.
1366 # @Prompt Base address of flash FTW working block range.
1367 gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingBase|0x0|UINT32|0x30000010
1368
1369 ## Size of the FTW working block range.
1370 # If the value is less than one block size, the work space range should not span blocks.
1371 # If the value is larger than one block size, it should be block size aligned.
1372 # @Prompt Size of flash FTW working block range.
1373 gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingSize|0x0|UINT32|0x30000011
1374
1375 ## 64-bit Base address of the NV variable range in flash device.
1376 # @Prompt 64-bit Base address of flash NV variable range.
1377 gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableBase64|0x0|UINT64|0x80000001
1378
1379 ## 64-bit Base address of the FTW spare block range in flash device. Note that this value should be block size aligned.
1380 # @Prompt 64-bit Base address of flash FTW spare block range.
1381 gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareBase64|0x0|UINT64|0x80000013
1382
1383 ## 64-bit Base address of the FTW working block range in flash device.
1384 # If PcdFlashNvStorageFtwWorkingSize is larger than one block size, this value should be block size aligned.
1385 # @Prompt 64-bit Base address of flash FTW working block range.
1386 gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingBase64|0x0|UINT64|0x80000010
1387
1388 ## This PCD defines a reserved memory range for the EMU Variable driver's NV Variable Store.
1389 # The range is valid if non-zero. The memory range size must be PcdVariableStoreSize.
1390 # @Prompt Reserved memory range for EMU variable NV storage.
1391 gEfiMdeModulePkgTokenSpaceGuid.PcdEmuVariableNvStoreReserved|0|UINT64|0x40000008
1392
1393 ## This PCD defines the times to print hello world string.
1394 # This PCD is a sample to explain UINT32 PCD usage.
1395 # @Prompt HellowWorld print times.
1396 gEfiMdeModulePkgTokenSpaceGuid.PcdHelloWorldPrintTimes|1|UINT32|0x40000005
1397
1398 ## This PCD defines the HelloWorld print string.
1399 # This PCD is a sample to explain String typed PCD usage.
1400 # @Prompt HelloWorld print string.
1401 gEfiMdeModulePkgTokenSpaceGuid.PcdHelloWorldPrintString|L"UEFI Hello World!\n"|VOID*|0x40000004
1402
1403 ## Indicates the maximum size of the capsule image with a reset flag that the platform can support.
1404 # The default max size is 100MB (0x6400000) for more than one large capsule images.
1405 # @Prompt Max size of populated capsule.
1406 gEfiMdeModulePkgTokenSpaceGuid.PcdMaxSizePopulateCapsule|0x6400000|UINT32|0x0001001e
1407
1408 ## Indicates the maximum size of the capsule image without a reset flag that the platform can support.
1409 # The default max size is 10MB (0xa00000) for the casule image without reset flag setting.
1410 # @Prompt Max size of non-populated capsule.
1411 gEfiMdeModulePkgTokenSpaceGuid.PcdMaxSizeNonPopulateCapsule|0xa00000|UINT32|0x0001001f
1412
1413 ## Null-terminated Unicode string of the firmware vendor name that is the default name filled into the EFI System Table.
1414 # @Prompt Firmware vendor.
1415 gEfiMdeModulePkgTokenSpaceGuid.PcdFirmwareVendor|L"EDK II"|VOID*|0x00010050
1416
1417 ## Firmware revision that is the default revision filled into the EFI System Table.
1418 # @Prompt Firmware revision.
1419 gEfiMdeModulePkgTokenSpaceGuid.PcdFirmwareRevision|0x00010000|UINT32|0x00010051
1420
1421 ## Null-terminated Unicode string that describes the firmware version.
1422 # @Prompt Firmware version string.
1423 gEfiMdeModulePkgTokenSpaceGuid.PcdFirmwareVersionString|L""|VOID*|0x00010052
1424
1425 ## Null-terminated Unicode string that contains the date the firmware was released
1426 # @Prompt Firmware release data string.
1427 gEfiMdeModulePkgTokenSpaceGuid.PcdFirmwareReleaseDateString|L""|VOID*|0x00010053
1428
1429 ## PcdStatusCodeMemorySize is used when PcdStatusCodeUseMemory is set to true.
1430 # (PcdStatusCodeMemorySize * KBytes) is the total taken memory size.<BR><BR>
1431 # The default value in PeiPhase is 1 KBytes.<BR>
1432 # The default value in DxePhase is 128 KBytes.<BR>
1433 # @Prompt StatusCode memory size.
1434 gEfiMdeModulePkgTokenSpaceGuid.PcdStatusCodeMemorySize|1|UINT16|0x00010054
1435
1436 ## Indicates if to reset system when memory type information changes.<BR><BR>
1437 # TRUE - Resets system when memory type information changes.<BR>
1438 # FALSE - Does not reset system when memory type information changes.<BR>
1439 # @Prompt Reset on memory type information change.
1440 gEfiMdeModulePkgTokenSpaceGuid.PcdResetOnMemoryTypeInformationChange|TRUE|BOOLEAN|0x00010056
1441
1442 ## Specify the foreground color for Subtile text in HII Form Browser. The default value is EFI_BLUE.
1443 # Only following values defined in UEFI specification are valid:<BR><BR>
1444 # 0x00 (EFI_BLACK)<BR>
1445 # 0x01 (EFI_BLUE)<BR>
1446 # 0x02 (EFI_GREEN)<BR>
1447 # 0x03 (EFI_CYAN)<BR>
1448 # 0x04 (EFI_RED)<BR>
1449 # 0x05 (EFI_MAGENTA)<BR>
1450 # 0x06 (EFI_BROWN)<BR>
1451 # 0x07 (EFI_LIGHTGRAY)<BR>
1452 # 0x08 (EFI_DARKGRAY)<BR>
1453 # 0x09 (EFI_LIGHTBLUE)<BR>
1454 # 0x0A (EFI_LIGHTGREEN)<BR>
1455 # 0x0B (EFI_LIGHTCYAN)<BR>
1456 # 0x0C (EFI_LIGHTRED)<BR>
1457 # 0x0D (EFI_LIGHTMAGENTA)<BR>
1458 # 0x0E (EFI_YELLOW)<BR>
1459 # 0x0F (EFI_WHITE)<BR>
1460 # @Prompt Foreground color for browser subtile.
1461 # @ValidRange 0x80000004 | 0x00 - 0x0F
1462 gEfiMdeModulePkgTokenSpaceGuid.PcdBrowserSubtitleTextColor|0x01|UINT8|0x00010057
1463
1464 ## Specify the foreground color for prompt and Question value text in HII Form Browser. The default value is EFI_BLACK.
1465 # Only following values defined in UEFI specification are valid:<BR><BR>
1466 # 0x00 (EFI_BLACK)<BR>
1467 # 0x01 (EFI_BLUE)<BR>
1468 # 0x02 (EFI_GREEN)<BR>
1469 # 0x03 (EFI_CYAN)<BR>
1470 # 0x04 (EFI_RED)<BR>
1471 # 0x05 (EFI_MAGENTA)<BR>
1472 # 0x06 (EFI_BROWN)<BR>
1473 # 0x07 (EFI_LIGHTGRAY)<BR>
1474 # 0x08 (EFI_DARKGRAY)<BR>
1475 # 0x09 (EFI_LIGHTBLUE)<BR>
1476 # 0x0A (EFI_LIGHTGREEN)<BR>
1477 # 0x0B (EFI_LIGHTCYAN)<BR>
1478 # 0x0C (EFI_LIGHTRED)<BR>
1479 # 0x0D (EFI_LIGHTMAGENTA)<BR>
1480 # 0x0E (EFI_YELLOW)<BR>
1481 # 0x0F (EFI_WHITE)<BR>
1482 # @Prompt Foreground color for browser field.
1483 # @ValidRange 0x80000004 | 0x00 - 0x0F
1484 gEfiMdeModulePkgTokenSpaceGuid.PcdBrowserFieldTextColor|0x00|UINT8|0x00010058
1485
1486 ## Specify the foreground color for highlighted prompt and Question value text in HII Form Browser.
1487 # The default value is EFI_LIGHTGRAY. Only following values defined in UEFI specification are valid:<BR><BR>
1488 # 0x00 (EFI_BLACK)<BR>
1489 # 0x01 (EFI_BLUE)<BR>
1490 # 0x02 (EFI_GREEN)<BR>
1491 # 0x03 (EFI_CYAN)<BR>
1492 # 0x04 (EFI_RED)<BR>
1493 # 0x05 (EFI_MAGENTA)<BR>
1494 # 0x06 (EFI_BROWN)<BR>
1495 # 0x07 (EFI_LIGHTGRAY)<BR>
1496 # 0x08 (EFI_DARKGRAY)<BR>
1497 # 0x09 (EFI_LIGHTBLUE)<BR>
1498 # 0x0A (EFI_LIGHTGREEN)<BR>
1499 # 0x0B (EFI_LIGHTCYAN)<BR>
1500 # 0x0C (EFI_LIGHTRED)<BR>
1501 # 0x0D (EFI_LIGHTMAGENTA)<BR>
1502 # 0x0E (EFI_YELLOW)<BR>
1503 # 0x0F (EFI_WHITE)<BR>
1504 # @Prompt Foreground color for highlighted browser field.
1505 # @ValidRange 0x80000004 | 0x00 - 0x0F
1506 gEfiMdeModulePkgTokenSpaceGuid.PcdBrowserFieldTextHighlightColor|0x07|UINT8|0x00010059
1507
1508 ## Specify the background color for highlighted prompt and Question value text in HII Form Browser.
1509 # The default value is EFI_BACKGROUND_BLACK. Only following values defined in UEFI specification are valid:<BR><BR>
1510 # 0x00 (EFI_BACKGROUND_BLACK)<BR>
1511 # 0x10 (EFI_BACKGROUND_BLUE)<BR>
1512 # 0x20 (EFI_BACKGROUND_GREEN)<BR>
1513 # 0x30 (EFI_BACKGROUND_CYAN)<BR>
1514 # 0x40 (EFI_BACKGROUND_RED)<BR>
1515 # 0x50 (EFI_BACKGROUND_MAGENTA)<BR>
1516 # 0x60 (EFI_BACKGROUND_BROWN)<BR>
1517 # 0x70 (EFI_BACKGROUND_LIGHTGRAY)<BR>
1518 # @Prompt Background color for highlighted browser field.
1519 # @ValidList 0x80000005 | 0x00, 0x10, 0x20, 0x30, 0x40, 0x50, 0x60, 0x70
1520 gEfiMdeModulePkgTokenSpaceGuid.PcdBrowserFieldBackgroundHighlightColor|0x00|UINT8|0x0001005A
1521
1522 ## Time in second to delay for SATA devices to spin-up for recovery.
1523 # @Prompt SATA spin-up delay time in second for recovery path.
1524 gEfiMdeModulePkgTokenSpaceGuid.PcdSataSpinUpDelayInSecForRecoveryPath|15|UINT16|0x0001005B
1525
1526 ## This PCD is used to specify memory size with page number for a pre-allocated ACPI reserved memory
1527 # to hold runtime(after SmmReadyToLock) created S3 boot script entries. The default page number is 2.
1528 # When changing the value of this PCD, the platform developer should make sure the memory size is
1529 # large enough to hold the S3 boot script node created in runtime(after SmmReadyToLock) phase.
1530 # @Prompt Reserved page number for S3 Boot Script Runtime Table.
1531 gEfiMdeModulePkgTokenSpaceGuid.PcdS3BootScriptRuntimeTableReservePageNumber|0x2|UINT16|0x0001005C
1532
1533 ## The PCD is used to specify the stack size when capsule IA32 PEI transfers to long mode in PEI phase.
1534 # The default size is 32K. When changing the value of this PCD, the platform developer should
1535 # make sure the memory size is large enough to meet capsule PEI requirement in capsule update path.
1536 # @Prompt Stack size for CapsulePei transfer to long mode.
1537 gEfiMdeModulePkgTokenSpaceGuid.PcdCapsulePeiLongModeStackSize|0x8000|UINT32|0x0001005D
1538
1539 ## Indicates if 1G page table will be enabled.<BR><BR>
1540 # TRUE - 1G page table will be enabled.<BR>
1541 # FALSE - 1G page table will not be enabled.<BR>
1542 # @Prompt Enable 1G page table support.
1543 gEfiMdeModulePkgTokenSpaceGuid.PcdUse1GPageTable|FALSE|BOOLEAN|0x0001005E
1544
1545 ## Indicates if the Single Root I/O virtualization is supported.<BR><BR>
1546 # TRUE - Single Root I/O virtualization is supported.<BR>
1547 # FALSE - Single Root I/O virtualization is not supported.<BR>
1548 # @Prompt Enable SRIOV support.
1549 gEfiMdeModulePkgTokenSpaceGuid.PcdSrIovSupport|TRUE|BOOLEAN|0x10000044
1550
1551 ## Indicates if the Alternative Routing-ID is supported.<BR><BR>
1552 # TRUE - Alternative Routing-ID is supported.<BR>
1553 # FALSE - Alternative Routing-ID is not supported.<BR>
1554 # @Prompt Enable ARI support.
1555 gEfiMdeModulePkgTokenSpaceGuid.PcdAriSupport|TRUE|BOOLEAN|0x10000045
1556
1557 ## Indicates if the Multi Root I/O virtualization is supported.<BR><BR>
1558 # TRUE - Multi Root I/O virtualization is supported.<BR>
1559 # FALSE - Multi Root I/O virtualization is not supported.<BR>
1560 # @Prompt Enable MRIOV support.
1561 gEfiMdeModulePkgTokenSpaceGuid.PcdMrIovSupport|FALSE|BOOLEAN|0x10000046
1562
1563 ## Single root I/O virtualization virtual function memory BAR alignment.<BR><BR>
1564 # BITN set indicates 2 of n+12 power<BR>
1565 # BIT0 set indicates 4KB alignment<BR>
1566 # BIT1 set indicates 8KB alignment<BR>
1567 # @Prompt SRIOV system page size.
1568 gEfiMdeModulePkgTokenSpaceGuid.PcdSrIovSystemPageSize|0x1|UINT32|0x10000047
1569
1570 ## SMBIOS version.
1571 # @Prompt SMBIOS version.
1572 gEfiMdeModulePkgTokenSpaceGuid.PcdSmbiosVersion|0x0301|UINT16|0x00010055
1573
1574 ## SMBIOS Docrev field in SMBIOS 3.0 (64-bit) Entry Point Structure.
1575 # @Prompt SMBIOS Docrev field in SMBIOS 3.0 (64-bit) Entry Point Structure.
1576 gEfiMdeModulePkgTokenSpaceGuid.PcdSmbiosDocRev|0x1|UINT8|0x0001006A
1577
1578 ## SMBIOS produce method.
1579 # BIT0 set indicates 32-bit entry point and table are produced.<BR>
1580 # BIT1 set indicates 64-bit entry point and table are produced.<BR>
1581 # @Prompt The policy to produce SMBIOS entry point and table.
1582 gEfiMdeModulePkgTokenSpaceGuid.PcdSmbiosEntryPointProvideMethod|0x3|UINT32|0x00010069
1583
1584 ## This PCD specifies the additional pad size in FPDT Basic Boot Performance Table for
1585 # the extension FPDT boot records received after ReadyToBoot and before ExitBootService.
1586 # @Prompt Pad size for extension FPDT boot records.
1587 gEfiMdeModulePkgTokenSpaceGuid.PcdExtFpdtBootRecordPadSize|0x0|UINT32|0x0001005F
1588
1589 ## Indicates if ConIn device are connected on demand.<BR><BR>
1590 # TRUE - ConIn device are not connected during BDS and ReadKeyStroke/ReadKeyStrokeEx produced
1591 # by Consplitter should be called before any real key read operation.<BR>
1592 # FALSE - ConIn device may be connected normally during BDS.<BR>
1593 # @Prompt ConIn connect on demand.
1594 gEfiMdeModulePkgTokenSpaceGuid.PcdConInConnectOnDemand|FALSE|BOOLEAN|0x10000060
1595
1596 ## Indicates if the S.M.A.R.T feature of attached ATA hard disks will be enabled.<BR><BR>
1597 # TRUE - S.M.A.R.T feature of attached ATA hard disks will be enabled.<BR>
1598 # FALSE - S.M.A.R.T feature of attached ATA hard disks will be default status.<BR>
1599 # @Prompt Enable ATA S.M.A.R.T feature.
1600 gEfiMdeModulePkgTokenSpaceGuid.PcdAtaSmartEnable|TRUE|BOOLEAN|0x00010065
1601
1602 ## Indicates if full PCI enumeration is disabled.<BR><BR>
1603 # TRUE - Full PCI enumeration is disabled.<BR>
1604 # FALSE - Full PCI enumeration is not disabled.<BR>
1605 # @Prompt Disable full PCI enumeration.
1606 gEfiMdeModulePkgTokenSpaceGuid.PcdPciDisableBusEnumeration|FALSE|BOOLEAN|0x10000048
1607
1608 ## Disk I/O - Number of Data Buffer block.
1609 # Define the size in block of the pre-allocated buffer. It provide better
1610 # performance for large Disk I/O requests.
1611 # @Prompt Disk I/O - Number of Data Buffer block.
1612 gEfiMdeModulePkgTokenSpaceGuid.PcdDiskIoDataBufferBlockNum|64|UINT32|0x30001039
1613
1614 ## This PCD specifies the PCI-based UFS host controller mmio base address.
1615 # Define the mmio base address of the pci-based UFS host controller. If there are multiple UFS
1616 # host controllers, their mmio base addresses are calculated one by one from this base address.
1617 # @Prompt Mmio base address of pci-based UFS host controller.
1618 gEfiMdeModulePkgTokenSpaceGuid.PcdUfsPciHostControllerMmioBase|0xd0000000|UINT32|0x10000061
1619
1620 ## Specify Max ESRT cache entry number supported for FMP instances
1621 #
1622 # @Prompt Max FMP ESRT entry number to be synced & cached in repository.
1623 gEfiMdeModulePkgTokenSpaceGuid.PcdMaxFmpEsrtCacheNum|32|UINT32|0x0000006b
1624
1625 ## Specify Max ESRT cache entry number supported for Non FMP instances
1626 #
1627 # @Prompt Max Non-FMP ESRT entry number to be cached in repository.
1628 gEfiMdeModulePkgTokenSpaceGuid.PcdMaxNonFmpEsrtCacheNum|32|UINT32|0x0000006c
1629
1630 ## Specify of Capsule Flag defined by CapsuleGuid to request system reboot after capsule process
1631 #
1632 # @Prompt Flag to request system reboot after processing capsule.
1633 gEfiMdeModulePkgTokenSpaceGuid.PcdSystemRebootAfterCapsuleProcessFlag|0x0001|UINT16|0x0000006d
1634
1635 ## Publish PropertiesTable or not.
1636 #
1637 # If this PCD is TRUE, DxeCore publishs PropertiesTable.
1638 # DxeCore evaluates if all runtime drivers has 4K aligned PE sections. If all
1639 # PE sections in runtime drivers are 4K aligned, DxeCore sets BIT0 in
1640 # PropertiesTable. Or DxeCore clears BIT0 in PropertiesTable.
1641 # If this PCD is FALSE, DxeCore does not publish PropertiesTable.
1642 #
1643 # If PropertiesTable has BIT0 set, DxeCore uses below policy in UEFI memory map:
1644 # 1) Use EfiRuntimeServicesCode for runtime driver PE image code section and
1645 # use EfiRuntimeServicesData for runtime driver PE image header and other section.
1646 # 2) Set EfiRuntimeServicesCode to be EFI_MEMORY_RO.
1647 # 3) Set EfiRuntimeServicesData to be EFI_MEMORY_XP.
1648 # 4) Set EfiMemoryMappedIO and EfiMemoryMappedIOPortSpace to be EFI_MEMORY_XP.
1649 #
1650 # NOTE: Platform need gurantee this PCD is set correctly. Platform should set
1651 # this PCD to be TURE if and only if all runtime driver has seperated Code/Data
1652 # section. If PE code/data sections are merged, the result is unpredictable.
1653 #
1654 # UEFI 2.6 specification does not recommend to use this BIT0 attribute.
1655 #
1656 # @Prompt Publish UEFI PropertiesTable.
1657 gEfiMdeModulePkgTokenSpaceGuid.PcdPropertiesTableEnable|FALSE|BOOLEAN|0x0000006e
1658
1659 ## Default OEM ID for ACPI table creation, its length must be 0x6 bytes to follow ACPI specification.
1660 # @Prompt Default OEM ID for ACPI table creation.
1661 gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiDefaultOemId|"INTEL "|VOID*|0x30001034
1662
1663 ## Default OEM Table ID for ACPI table creation, it is "EDK2 ".
1664 # According to ACPI specification, this field is particularly useful when
1665 # defining a definition block to distinguish definition block functions.
1666 # The OEM assigns each dissimilar table a new OEM Table ID.
1667 # This PCD is ignored for definition block.
1668 # @Prompt Default OEM Table ID for ACPI table creation.
1669 gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiDefaultOemTableId|0x20202020324B4445|UINT64|0x30001035
1670
1671 ## Default OEM Revision for ACPI table creation.
1672 # According to ACPI specification, for LoadTable() opcode, the OS can also
1673 # check the OEM Table ID and Revision ID against a database for a newer
1674 # revision Definition Block of the same OEM Table ID and load it instead.
1675 # This PCD is ignored for definition block.
1676 # @Prompt Default OEM Revision for ACPI table creation.
1677 gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiDefaultOemRevision|0x00000002|UINT32|0x30001036
1678
1679 ## Default Creator ID for ACPI table creation.
1680 # According to ACPI specification, for tables containing Definition Blocks,
1681 # this is the ID for the ASL Compiler.
1682 # This PCD is ignored for definition block.
1683 # @Prompt Default Creator ID for ACPI table creation.
1684 gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiDefaultCreatorId|0x20202020|UINT32|0x30001037
1685
1686 ## Default Creator Revision for ACPI table creation.
1687 # According to ACPI specification, for tables containing Definition Blocks,
1688 # this is the revision for the ASL Compiler.
1689 # This PCD is ignored for definition block.
1690 # @Prompt Default Creator Revision for ACPI table creation.
1691 gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiDefaultCreatorRevision|0x01000013|UINT32|0x30001038
1692
1693 ## Indicates if to set NX for stack.<BR><BR>
1694 # For the DxeIpl and the DxeCore are both X64, set NX for stack feature also require PcdDxeIplBuildPageTables be TRUE.<BR>
1695 # For the DxeIpl and the DxeCore are both IA32 (PcdDxeIplSwitchToLongMode is FALSE), set NX for stack feature also require
1696 # IA32 PAE is supported and Execute Disable Bit is available.<BR>
1697 # TRUE - to set NX for stack.<BR>
1698 # FALSE - Not to set NX for stack.<BR>
1699 # @Prompt Set NX for stack.
1700 gEfiMdeModulePkgTokenSpaceGuid.PcdSetNxForStack|FALSE|BOOLEAN|0x0001006f
1701
1702 ## This PCD specifies the PCI-based SD/MMC host controller mmio base address.
1703 # Define the mmio base address of the pci-based SD/MMC host controller. If there are multiple SD/MMC
1704 # host controllers, their mmio base addresses are calculated one by one from this base address.
1705 # @Prompt Mmio base address of pci-based SD/MMC host controller.
1706 gEfiMdeModulePkgTokenSpaceGuid.PcdSdMmcPciHostControllerMmioBase|0xd0000000|UINT32|0x30001043
1707
1708 ## Indicates if ACPI S3 will be enabled.<BR><BR>
1709 # TRUE - ACPI S3 will be enabled.<BR>
1710 # FALSE - ACPI S3 will be disabled.<BR>
1711 # @Prompt ACPI S3 Enable.
1712 gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiS3Enable|TRUE|BOOLEAN|0x01100000
1713
1714 ## Specify memory size for boot script executor stack usage in S3 phase.
1715 # The default size 32K. When changing the value make sure the memory size is large enough
1716 # to meet boot script executor requirement in the S3 phase.
1717 # @Prompt Reserved S3 Boot Script Stack ACPI Memory Size
1718 gEfiMdeModulePkgTokenSpaceGuid.PcdS3BootScriptStackSize|0x8000|UINT32|0x02000000
1719
1720 ## Indicates if to use the optimized timing for best PS2 detection performance.
1721 # Note this PCD could be set to TRUE for best boot performance and set to FALSE for best device compatibility.<BR><BR>
1722 # TRUE - Use the optimized timing for best PS2 detection performance.<BR>
1723 # FALSE - Use the normal timing to detect PS2.<BR>
1724 # @Prompt Enable fast PS2 detection
1725 gEfiMdeModulePkgTokenSpaceGuid.PcdFastPS2Detection|FALSE|BOOLEAN|0x30001044
1726
1727 ## This is recover file name in PEI phase.
1728 # The file must be in the root directory.
1729 # The file name must be the 8.3 format.
1730 # The PCD data must be in UNICODE format.
1731 # @Prompt Recover file name in PEI phase
1732 gEfiMdeModulePkgTokenSpaceGuid.PcdRecoveryFileName|L"FVMAIN.FV"|VOID*|0x30001045
1733
1734 ## This PCD hold a list GUIDs for the ImageTypeId to indicate the
1735 # FMP capsule is a system FMP.
1736 # @Prompt A list of system FMP ImageTypeId GUIDs
1737 gEfiMdeModulePkgTokenSpaceGuid.PcdSystemFmpCapsuleImageTypeIdGuid|{0x0}|VOID*|0x30001046
1738
1739 ## This PCD holds the address mask for page table entries when memory encryption is
1740 # enabled on AMD processors supporting the Secure Encrypted Virtualization (SEV) feature.
1741 # This mask should be applied when creating 1:1 virtual to physical mapping tables.
1742 # @Prompt The address mask when memory encryption is enabled.
1743 gEfiMdeModulePkgTokenSpaceGuid.PcdPteMemoryEncryptionAddressOrMask|0x0|UINT64|0x30001047
1744
1745 [PcdsPatchableInModule]
1746 ## Specify memory size with page number for PEI code when
1747 # Loading Module at Fixed Address feature is enabled.
1748 # The value will be set by the build tool.
1749 # @Prompt LMFA PEI code page number.
1750 # @ValidList 0x80000001 | 0
1751 gEfiMdeModulePkgTokenSpaceGuid.PcdLoadFixAddressPeiCodePageNumber|0|UINT32|0x00000029
1752
1753 ## Specify memory size with page number for DXE boot time code when
1754 # Loading Module at Fixed Address feature is enabled.
1755 # The value will be set by the build tool.
1756 # @Prompt LMFA DXE boot code page number.
1757 # @ValidList 0x80000001 | 0
1758 gEfiMdeModulePkgTokenSpaceGuid.PcdLoadFixAddressBootTimeCodePageNumber|0|UINT32|0x0000002a
1759
1760 ## Specify memory size with page number for DXE runtime code when
1761 # Loading Module at Fixed Address feature is enabled.
1762 # The value will be set by the build tool.
1763 # @Prompt LMFA DXE runtime code page number.
1764 # @ValidList 0x80000001 | 0
1765 gEfiMdeModulePkgTokenSpaceGuid.PcdLoadFixAddressRuntimeCodePageNumber|0|UINT32|0x0000002b
1766
1767 ## Specify memory size with page number for SMM code when
1768 # Loading Module at Fixed Address feature is enabled.
1769 # The value will be set by the build tool.
1770 # @Prompt LMFA SMM code page number.
1771 # @ValidList 0x80000001 | 0
1772 gEfiMdeModulePkgTokenSpaceGuid.PcdLoadFixAddressSmmCodePageNumber|0|UINT32|0x0000002c
1773
1774 [PcdsDynamic, PcdsDynamicEx]
1775 ## This dynamic PCD hold an address to point to private data structure used in DxeS3BootScriptLib library
1776 # instance which records the S3 boot script table start address, length, etc. To introduce this PCD is
1777 # only for DxeS3BootScriptLib instance implementation purpose. The platform developer should make sure the
1778 # default value is set to Zero. And the PCD is assumed ONLY to be accessed in DxeS3BootScriptLib Library.
1779 # @Prompt S3 Boot Script Table Private Data pointer.
1780 # @ValidList 0x80000001 | 0x0
1781 gEfiMdeModulePkgTokenSpaceGuid.PcdS3BootScriptTablePrivateDataPtr|0x0|UINT64|0x00030000
1782
1783 ## This dynamic PCD hold an address to point to private data structure SMM copy used in DxeS3BootScriptLib library
1784 # instance which records the S3 boot script table start address, length, etc. To introduce this PCD is
1785 # only for DxeS3BootScriptLib instance implementation purpose. The platform developer should make sure the
1786 # default value is set to Zero. And the PCD is assumed ONLY to be accessed in DxeS3BootScriptLib Library.
1787 # @Prompt S3 Boot Script Table Private Smm Data pointer.
1788 # @ValidList 0x80000001 | 0x0
1789 gEfiMdeModulePkgTokenSpaceGuid.PcdS3BootScriptTablePrivateSmmDataPtr|0x0|UINT64|0x00030001
1790
1791 ## This dynamic PCD hold an address to point to the memory of page table. The page table establishes a 1:1
1792 # Virtual to Physical mapping according to the processor physical address bits.
1793 # @Prompt Identify Mapping Page Table pointer.
1794 # @ValidList 0x80000001 | 0x0
1795 gEfiMdeModulePkgTokenSpaceGuid.PcdIdentifyMappingPageTablePtr|0x0|UINT64|0x00030002
1796
1797 ## This dynamic PCD holds the information if there is any test key used by the platform.
1798 # @Prompt If there is any test key used by the platform.
1799 gEfiMdeModulePkgTokenSpaceGuid.PcdTestKeyUsed|FALSE|BOOLEAN|0x00030003
1800
1801 [UserExtensions.TianoCore."ExtraFiles"]
1802 MdeModulePkgExtra.uni