MdeModulePkg/MdeModulePkg.dec

   1 ## @file  MdeModulePkg.dec
   2 #
   3 # This package provides the modules that conform to UEFI/PI Industry standards.
   4 # It also provides the defintions(including PPIs/PROTOCOLs/GUIDs and library classes)
   5 # and libraries instances, which are used for those modules.
   6 #
   7 # Copyright (c) 2007 - 2011, Intel Corporation. All rights reserved.<BR>
   8 # This program and the accompanying materials are licensed and made available under
   9 # the terms and conditions of the BSD License that accompanies this distribution.
  10 # The full text of the license may be found at
  11 # http://opensource.org/licenses/bsd-license.php.
  12 #
  13 # THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
  14 # WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
  15 #
  16 ##
  17
  18
  19 [Defines]
  20   DEC_SPECIFICATION              = 0x00010005
  21   PACKAGE_NAME                   = MdeModulePkg
  22   PACKAGE_GUID                   = BA0D78D6-2CAF-414b-BD4D-B6762A894288
  23   PACKAGE_VERSION                = 0.91
  24
  25 [Includes]
  26   Include
  27
  28
  29 [LibraryClasses]
  30   ##  @libraryclass  IpIo layer upon EFI IP4 Protocol.
  31   #   This library is only intended to be used by UEFI network stack modules.
  32   IpIoLib|Include/Library/IpIoLib.h
  33
  34   ##  @libraryclass  Basic function for UEFI network stack.
  35   #   This library is only intended to be used by UEFI network stack modules.
  36   NetLib|Include/Library/NetLib.h
  37
  38   ##  @libraryclass  The helper routines to access UDP service.
  39   #   This library is only intended to be used by UEFI network stack modules.
  40   UdpIoLib|Include/Library/UdpIoLib.h
  41
  42   ##  @libraryclass  The helper routines to access TCP service.
  43   #   This library is only intended to be used by UEFI network stack modules.
  44   TcpIoLib|Include/Library/TcpIoLib.h
  45
  46   ##  @libraryclass  Defines a set of methods to reset whole system.
  47   ResetSystemLib|Include/Library/ResetSystemLib.h
  48
  49   ##  @libraryclass  Defines a set of methods related do S3 mode.
  50   #   This library class is no longer used and modules using this library should
  51   #   directly locate EFI_PEI_S3_RESUME_PPI defined in PI 1.2 specification.
  52   S3Lib|Include/Library/S3Lib.h
  53
  54   ##  @libraryclass  Defines a set of methods related recovery mode.
  55   #   This library class is no longer used and modules using this library should
  56   #   directly locate EFI_PEI_RECOVERY_MODULE_PPI defined in PI 1.2 specification.
  57   RecoveryLib|Include/Library/RecoveryLib.h
  58
  59   ##  @libraryclass  Provides HII related functions.
  60   HiiLib|Include/Library/HiiLib.h
  61
  62   ##  @libraryclass  Defines a set of interfaces on how to process capusle image update.
  63   CapsuleLib|Include/Library/CapsuleLib.h
  64
  65   ##  @libraryclass  Library for Deferred Procedure Calls.
  66   DpcLib|Include/Library/DpcLib.h
  67
  68   ##  @libraryclass    Provides global variables that are pointers
  69   #   to the UEFI HII related protocols.
  70   #
  71   UefiHiiServicesLib|Include/Library/UefiHiiServicesLib.h
  72
  73   ##  @libraryclass    Provides a set of interfaces to abstract the policy of security measurement.
  74   #
  75   SecurityManagementLib|Include/Library/SecurityManagementLib.h
  76
  77   ##  @libraryclass  OEM status code libary is used to report status code to OEM device.
  78   #
  79   OemHookStatusCodeLib|Include/Library/OemHookStatusCodeLib.h
  80
  81   ##  @libraryclass  Debug Agent is used to provide soft debug capability.
  82   #
  83   DebugAgentLib|Include/Library/DebugAgentLib.h
  84
  85   ##  @libraryclass  Provide platform specific hooks.
  86   #
  87   PlatformHookLib|Include/Library/PlatformHookLib.h
  88
  89 [Guids]
  90   ## MdeModule package token space guid
  91   # Include/Guid/MdeModulePkgTokenSpace.h
  92   gEfiMdeModulePkgTokenSpaceGuid       = { 0xA1AFF049, 0xFDEB, 0x442a, { 0xB3, 0x20, 0x13, 0xAB, 0x4C, 0xB7, 0x2B, 0xBC }}
  93
  94   ## Hob guid for Pcd DataBase
  95   #  Include/Guid/PcdDataBaseHobGuid.h
  96   gPcdDataBaseHobGuid            = { 0xEA296D92, 0x0B69, 0x423C, { 0x8C, 0x28, 0x33, 0xB4, 0xE0, 0xA9, 0x12, 0x68 }}
  97
  98   ## Guid for EDKII implementation GUIDed opcodes
  99   #  Include/Guid/MdeModuleHii.h
 100   gEfiIfrTianoGuid      = { 0xf0b1735, 0x87a0, 0x4193, {0xb2, 0x66, 0x53, 0x8c, 0x38, 0xaf, 0x48, 0xce }}
 101
 102   ## Guid for Framework vfr GUIDed opcodes.
 103   #  Include/Guid/MdeModuleHii.h
 104   gEfiIfrFrameworkGuid  = { 0x31ca5d1a, 0xd511, 0x4931, { 0xb7, 0x82, 0xae, 0x6b, 0x2b, 0x17, 0x8c, 0xd7 }}
 105
 106   ## Guid to specify the System Non Volatile FV
 107   #  Include/Guid/SystemNvDataGuid.h
 108   gEfiSystemNvDataFvGuid         = { 0xFFF12B8D, 0x7696, 0x4C8B, { 0xA9, 0x85, 0x27, 0x47, 0x07, 0x5B, 0x4F, 0x50 }}
 109
 110   ## Guid specify the device is the console out device.
 111   #  Include/Guid/ConsoleOutDevice.h
 112   gEfiConsoleOutDeviceGuid       = { 0xD3B36F2C, 0xD551, 0x11D4, { 0x9A, 0x46, 0x00, 0x90, 0x27, 0x3F, 0xC1, 0x4D }}
 113
 114   ## Guid specify the device is the console in device.
 115   #  Include/Guid/ConsoleInDevice.h
 116   gEfiConsoleInDeviceGuid        = { 0xD3B36F2B, 0xD551, 0x11D4, { 0x9A, 0x46, 0x00, 0x90, 0x27, 0x3F, 0xC1, 0x4D }}
 117
 118   ## Hob and Variable guid specify the platform memory type information.
 119   #  Include/Guid/MemoryTypeInformation.h
 120   gEfiMemoryTypeInformationGuid  = { 0x4C19049F, 0x4137, 0x4DD3, { 0x9C, 0x10, 0x8B, 0x97, 0xA8, 0x3F, 0xFD, 0xFA }}
 121
 122   ## Capsule update hob and variable guid
 123   #  Include/Guid/CapsuleVendor.h
 124   gEfiCapsuleVendorGuid          = { 0x711C703F, 0xC285, 0x4B10, { 0xA3, 0xB0, 0x36, 0xEC, 0xBD, 0x3C, 0x8B, 0xE2 }}
 125
 126   ## Guid specifiy the device is the StdErr device.
 127   #  Include/Guid/StandardErrorDevice.h
 128   gEfiStandardErrorDeviceGuid    = { 0xD3B36F2D, 0xD551, 0x11D4, { 0x9A, 0x46, 0x00, 0x90, 0x27, 0x3F, 0xC1, 0x4D }}
 129
 130   ## Guid acted as variable store header's signature and to specify the variable list entries put in the EFI system table.
 131   #  Include/Guid/VariableFormat.h
 132   gEfiVariableGuid           = { 0xddcf3616, 0x3275, 0x4164, { 0x98, 0xb6, 0xfe, 0x85, 0x70, 0x7f, 0xfe, 0x7d }}
 133
 134   #  Include/Guid/VariableIndexTable.h
 135   gEfiVariableIndexTableGuid  = { 0x8cfdb8c8, 0xd6b2, 0x40f3, { 0x8e, 0x97, 0x02, 0x30, 0x7c, 0xc9, 0x8b, 0x7c }}
 136
 137   ## Guid is defined for SMM variable module to notify SMM variable wrapper module when variable write service was ready.
 138   #  Include/Guid/SmmVariableCommon.h
 139   gSmmVariableWriteGuid  = { 0x93ba1826, 0xdffb, 0x45dd, { 0x82, 0xa7, 0xe7, 0xdc, 0xaa, 0x3b, 0xbd, 0xf3 }}
 140
 141   ## Performance protocol guid that also acts as the performance HOB guid and performance variable GUID
 142   #  Include/Guid/Performance.h
 143   gPerformanceProtocolGuid       = { 0x76B6BDFA, 0x2ACD, 0x4462, { 0x9E, 0x3F, 0xCB, 0x58, 0xC9, 0x69, 0xD9, 0x37 }}
 144   gSmmPerformanceProtocolGuid    = { 0xf866226a, 0xeaa5, 0x4f5a, { 0xa9, 0xa, 0x6c, 0xfb, 0xa5, 0x7c, 0x58, 0x8e } }
 145
 146   ## Guid is defined for CRC32 encapsulation scheme.
 147   #  Include/Guid/Crc32GuidedSectionExtraction.h
 148   gEfiCrc32GuidedSectionExtractionGuid = { 0xFC1BCDB0, 0x7D31, 0x49aa, {0x93, 0x6A, 0xA4, 0x60, 0x0D, 0x9D, 0xD0, 0x83 } }
 149
 150   ## Include/Guid/NicIp4ConfigNvData.h
 151   gEfiNicIp4ConfigVariableGuid   = {0xd8944553, 0xc4dd, 0x41f4, { 0x9b, 0x30, 0xe1, 0x39, 0x7c, 0xfb, 0x26, 0x7b }}
 152
 153   ## Include/Guid/StatusCodeCallbackGuid.h
 154   gStatusCodeCallbackGuid   = {0xe701458c, 0x4900, 0x4ca5, {0xb7, 0x72, 0x3d, 0x37, 0x94, 0x9f, 0x79, 0x27}}
 155
 156   ## GUID identifies status code records HOB that originate from the PEI status code
 157   #  Include/Guid/MemoryStatusCodeRecord.h
 158   gMemoryStatusCodeRecordGuid     = { 0x060CC026, 0x4C0D, 0x4DDA, { 0x8F, 0x41, 0x59, 0x5F, 0xEF, 0x00, 0xA5, 0x02 }}
 159
 160   ## GUID used to pass DEBUG() macro information through the Status Code Protocol and Status Code PPI
 161   #  Include/Guid/StatusCodeDataTypeDebug.h
 162   gEfiStatusCodeDataTypeDebugGuid  = { 0x9A4E9246, 0xD553, 0x11D5, { 0x87, 0xE2, 0x00, 0x06, 0x29, 0x45, 0xC3, 0xB9 }}
 163
 164   ##  A configuration Table Guid for Load module at fixed address
 165   #  Include/Guid/LoadModuleAtFixedAddress.h
 166   gLoadFixedAddressConfigurationTableGuid  = { 0x2CA88B53,0xD296,0x4080, { 0xA4,0xA5,0xCA,0xD9,0xBA,0xE2,0x4B,0x9 } }
 167
 168   ## GUID used to store the global debug mask value into an EFI Variable
 169   # Include/Guid/DebugMask.h
 170   gEfiGenericVariableGuid = { 0x59d1c24f, 0x50f1, 0x401a, {0xb1, 0x01, 0xf3, 0x3e, 0x0d, 0xae, 0xd4, 0x43} }
 171
 172   ##  Event for the DXE Core to signal idle events
 173   #  Include/Guid/EventIdle.h
 174   gIdleLoopEventGuid  = { 0x3c8d294c, 0x5fc3, 0x4451, { 0xbb, 0x31, 0xc4, 0xc0, 0x32, 0x29, 0x5e, 0x6c } }
 175
 176   ## Include/Guid/RecoveryDevice.h
 177   gRecoveryOnFatUsbDiskGuid          = { 0x0FFBCE19, 0x324C, 0x4690, { 0xA0, 0x09, 0x98, 0xC6, 0xAE, 0x2E, 0xB1, 0x86 }}
 178
 179   ## Include/Guid/RecoveryDevice.h
 180   gRecoveryOnFatIdeDiskGuid          = { 0xB38573B6, 0x6200, 0x4AC5, { 0xB5, 0x1D, 0x82, 0xE6, 0x59, 0x38, 0xD7, 0x83 }}
 181
 182   ## Include/Guid/RecoveryDevice.h
 183   gRecoveryOnFatFloppyDiskGuid       = { 0x2E3D2E75, 0x9B2E, 0x412D, { 0xB4, 0xB1, 0x70, 0x41, 0x6B, 0x87, 0x00, 0xFF }}
 184
 185   ## Include/Guid/RecoveryDevice.h
 186   gRecoveryOnDataCdGuid              = { 0x5CAC0099, 0x0DC9, 0x48E5, { 0x80, 0x68, 0xBB, 0x95, 0xF5, 0x40, 0x0A, 0x9F }}
 187
 188   ## Include/Guid/SmmLockBox.h
 189   gEfiSmmLockBoxCommunicationGuid       = { 0x2a3cfebd, 0x27e8, 0x4d0a, { 0x8b, 0x79, 0xd6, 0x88, 0xc2, 0xa3, 0xe1, 0xc0 }}
 190
 191   ## Include/Guid/AcpiS3Context.h
 192   gEfiAcpiVariableGuid               = { 0xAF9FFD67, 0xEC10, 0x488A, { 0x9D, 0xFC, 0x6C, 0xBF, 0x5E, 0xE2, 0x2C, 0x2E }}
 193
 194   ## Include/Guid/AcpiS3Context.h
 195   gEfiAcpiS3ContextGuid              = { 0xef98d3a, 0x3e33, 0x497a, { 0xa4, 0x1, 0x77, 0xbe, 0x3e, 0xb7, 0x4f, 0x38 }}
 196
 197 [Ppis]
 198   ## Include/Ppi/AtaController.h
 199   gPeiAtaControllerPpiGuid       = { 0xa45e60d1, 0xc719, 0x44aa, { 0xb0, 0x7a, 0xaa, 0x77, 0x7f, 0x85, 0x90, 0x6d }}
 200
 201   ## Include/Ppi/UsbHostController.h
 202   gPeiUsbHostControllerPpiGuid   = { 0x652B38A9, 0x77F4, 0x453F, { 0x89, 0xD5, 0xE7, 0xBD, 0xC3, 0x52, 0xFC, 0x53 }}
 203
 204   ## Include/Ppi/Usb2HostController.h
 205   gPeiUsb2HostControllerPpiGuid  = { 0xfedd6305, 0xe2d7, 0x4ed5, { 0x9f, 0xaa, 0xda, 0x8, 0xe, 0x33, 0x6c, 0x22   }}
 206
 207   ## Include/Ppi/UsbController.h
 208   gPeiUsbControllerPpiGuid       = { 0x3BC1F6DE, 0x693E, 0x4547, { 0xA3, 0x00, 0x21, 0x82, 0x3C, 0xA4, 0x20, 0xB2 }}
 209
 210   ## Include/Ppi/UsbIo.h
 211   gPeiUsbIoPpiGuid               = { 0x7C29785C, 0x66B9, 0x49FC, { 0xB7, 0x97, 0x1C, 0xA5, 0x55, 0x0E, 0xF2, 0x83 }}
 212
 213   ## Include/Ppi/Capsule.h
 214   gPeiCapsulePpiGuid             = { 0x3acf33ee, 0xd892, 0x40f4, { 0xa2, 0xfc, 0x38, 0x54, 0xd2, 0xe1, 0x32, 0x3d }}
 215
 216   ## Include/Ppi/SmmCommunication.h
 217   gEfiPeiSmmCommunicationPpiGuid   =  { 0xae933e1c, 0xcc47, 0x4e38, { 0x8f, 0xe, 0xe2, 0xf6, 0x1d, 0x26, 0x5, 0xdf }}
 218
 219   ## Include/Ppi/SmmAccess.h
 220   gPeiSmmAccessPpiGuid          =  { 0x268f33a9, 0xcccd, 0x48be, { 0x88, 0x17, 0x86, 0x5, 0x3a, 0xc3, 0x2e, 0xd6 }}
 221
 222   ## Include/Ppi/SmmControl.h
 223   gPeiSmmControlPpiGuid         =  { 0x61c68702, 0x4d7e, 0x4f43, { 0x8d, 0xef, 0xa7, 0x43, 0x5, 0xce, 0x74, 0xc5 }}
 224
 225 [Protocols]
 226   ## Load File protocol provides capability to load and unload EFI image into memory and execute it.
 227   #  Include/Protocol/LoadPe32Image.h
 228   #  This protocol is deprecated. Native EDKII module should NOT use this protocol to load/unload image.
 229   #  If developer need implement such functionality, they should use BasePeCoffLib.
 230   gEfiLoadPeImageProtocolGuid    = { 0x5CB5C776, 0x60D5, 0x45EE, { 0x88, 0x3C, 0x45, 0x27, 0x08, 0xCD, 0x74, 0x3F }}
 231
 232   ## Print protocol defines basic print functions to print the format unicode and ascii string.
 233   # Include/Protocol/Print2.h
 234   gEfiPrint2ProtocolGuid          = { 0xf05976ef, 0x83f1, 0x4f3d, { 0x86, 0x19, 0xf7, 0x59, 0x5d, 0x41, 0xe5, 0x38 } }
 235
 236   ## This protocol defines the generic memory test interfaces in Dxe phase.
 237   # Include/Protocol/GenericMemoryTest.h
 238   gEfiGenericMemTestProtocolGuid = { 0x309DE7F1, 0x7F5E, 0x4ACE, { 0xB4, 0x9C, 0x53, 0x1B, 0xE5, 0xAA, 0x95, 0xEF }}
 239
 240   ## Include/Protocol/Dpc.h
 241   gEfiDpcProtocolGuid            = {0x480f8ae9, 0xc46, 0x4aa9,  { 0xbc, 0x89, 0xdb, 0x9f, 0xba, 0x61, 0x98, 0x6 }}
 242
 243   ## Fault Tolerant Write protocol provides boot-time service to do fault tolerant write capability for block devices.
 244   #  Include/Protocol/FaultTolerantWrite.h
 245   gEfiFaultTolerantWriteProtocolGuid = { 0x3EBD9E82, 0x2C78, 0x4DE6, { 0x97, 0x86, 0x8D, 0x4B, 0xFC, 0xB7, 0xC8, 0x81 }}
 246
 247   ## This protocol provides boot-time service to do fault tolerant write capability for block devices in SMM environment.
 248   #  Include/Protocol/SmmFaultTolerantWrite.h
 249   gEfiSmmFaultTolerantWriteProtocolGuid = { 0x3868fc3b, 0x7e45, 0x43a7, { 0x90, 0x6c, 0x4b, 0xa4, 0x7d, 0xe1, 0x75, 0x4d }}
 250
 251   ## This protocol is used to abstract the swap operation of boot block and backup block of boot FV.
 252   #  Include/Protocol/SwapAddressRange.h
 253   gEfiSwapAddressRangeProtocolGuid = { 0x1259F60D, 0xB754, 0x468E, { 0xA7, 0x89, 0x4D, 0xB8, 0x5D, 0x55, 0xE8, 0x7E }}
 254
 255   ## This protocol is used to abstract the swap operation of boot block and backup block of boot FV in SMM environment.
 256   #  Include/Protocol/SmmSwapAddressRange.h
 257   gEfiSmmSwapAddressRangeProtocolGuid = { 0x67c4f112, 0x3385, 0x4e55, { 0x9c, 0x5b, 0xc0, 0x5b, 0x71, 0x7c, 0x42, 0x28 }}
 258
 259   ## This protocol is intended for use as a means to store data in the EFI SMM environment.
 260   #  Include/Protocol/SmmVariableProtocol.h
 261   gEfiSmmVariableProtocolGuid = { 0xed32d533, 0x99e6, 0x4209, { 0x9c, 0xc0, 0x2d, 0x72, 0xcd, 0xd9, 0x98, 0xa7 }}
 262
 263   ## This protocol is similar with DXE FVB protocol and used in the UEFI SMM evvironment.
 264   #  Include/Protocol/SmmFirmwareVolumeBlock.h
 265   gEfiSmmFirmwareVolumeBlockProtocolGuid = { 0xd326d041, 0xbd31, 0x4c01, { 0xb5, 0xa8, 0x62, 0x8b, 0xe8, 0x7f, 0x6, 0x53 }}
 266
 267   ## This protocol allows the error level mask for DEBUG() macros to be adjusted for DXE Phase modules
 268   # Include/Guid/DebugMask.h
 269   gEfiDebugMaskProtocolGuid = { 0x4c8a2451, 0xc207, 0x405b, {0x96, 0x94, 0x99, 0xea, 0x13, 0x25, 0x13, 0x41} }
 270
 271   ## Include/Protocol/LockBox.h
 272   gEfiLockBoxProtocolGuid        = { 0xbd445d79, 0xb7ad, 0x4f04, { 0x9a, 0xd8, 0x29, 0xbd, 0x20, 0x40, 0xeb, 0x3c }}
 273
 274 [PcdsFeatureFlag]
 275   ## Indicate whether platform can support update capsule across a system reset
 276   gEfiMdeModulePkgTokenSpaceGuid.PcdSupportUpdateCapsuleReset|FALSE|BOOLEAN|0x0001001d
 277
 278   ## This feature flag can be used to enable or disable all PCD PEIM services.
 279   #  If TRUE, all PCD PPI services will be produced.
 280   #  If FALSE, the minimal PCD PEIM services (only GetService) will be produced.
 281   gEfiMdeModulePkgTokenSpaceGuid.PcdPeiFullPcdDatabaseEnable|TRUE|BOOLEAN|0x00010020
 282
 283   ## If TRUE, then the Device Path To Text Protocol should be produced by the platform.
 284   #  It can be disabled to save size.
 285   gEfiMdeModulePkgTokenSpaceGuid.PcdDevicePathSupportDevicePathToText|TRUE|BOOLEAN|0x00010037
 286
 287   ## If TRUE, then the Device Path From Text Protocol should be produced by the platform.
 288   #  It can be disabled to save size.
 289   gEfiMdeModulePkgTokenSpaceGuid.PcdDevicePathSupportDevicePathFromText|TRUE|BOOLEAN|0x00010038
 290
 291   ## If TRUE, enable the statistic functionality about variable usage. Such information is
 292   #  stored as a vendor configuration table into the EFI system table.
 293   #  If user wants to use VariableInfo application in MdeModulePkg\Application directory to get
 294   #  variable usage info, this pcd should be set as TRUE. Otherwise VariableInfo application can
 295   #  not output useful info.
 296   gEfiMdeModulePkgTokenSpaceGuid.PcdVariableCollectStatistics|FALSE|BOOLEAN|0x0001003f
 297
 298   ## If TRUE, Unicode Collation Protocol will be installed.
 299   gEfiMdeModulePkgTokenSpaceGuid.PcdUnicodeCollationSupport|TRUE|BOOLEAN|0x00010040
 300
 301   ## If TRUE, Unicode Collation 2 Protocol will be installed.
 302   gEfiMdeModulePkgTokenSpaceGuid.PcdUnicodeCollation2Support|TRUE|BOOLEAN|0x00010041
 303
 304   ## If TRUE, Graphics Output Protocol will be installed on virtual handle created by ConsplitterDxe.
 305   #  It could be set FALSE to save size.
 306   gEfiMdeModulePkgTokenSpaceGuid.PcdConOutGopSupport|TRUE|BOOLEAN|0x00010042
 307
 308   ## If TRUE, UGA Draw Protocol will be installed on virtual handle created by ConsplitterDxe.
 309   #  It could be set FALSE to save size.
 310   gEfiMdeModulePkgTokenSpaceGuid.PcdConOutUgaSupport|TRUE|BOOLEAN|0x00010043
 311
 312   ## If TRUE, when PeiCore dispatches a PEI module, PeiCore will first search TE section from this PEIM to load the image.
 313   #  If TE section is not found, then PeiCore will search PE section.
 314   #  If FALSE, PeiCore will first search PE section from PEIM to load the image.
 315   #  This PCD is used to tune Pei phase performance to reduce the search image time.
 316   #  It can be set according to the generated image section type.
 317   gEfiMdeModulePkgTokenSpaceGuid.PcdPeiCoreImageLoaderSearchTeSectionFirst|TRUE|BOOLEAN|0x00010044
 318
 319   ## If TRUE, force to switch off the support of legacy usb. So legacy usb device driver can not make use of SMI
 320   #  interrupt to access usb device in the case of absence of usb stack.
 321   #  DUET platform requires the token to be TRUE.
 322   gEfiMdeModulePkgTokenSpaceGuid.PcdTurnOffUsbLegacySupport|FALSE|BOOLEAN|0x00010047
 323
 324   ## If TRUE, HiiImageProtocol will be installed.
 325   #  FALSE is for size reduction.
 326   gEfiMdeModulePkgTokenSpaceGuid.PcdSupportHiiImageProtocol|TRUE|BOOLEAN|0x00010100
 327
 328   ## If TRUE, USB KeyBoard Driver disables the default keyboard layout.
 329   #  The default keyboard layout serves as the backup when no keyboard layout can be retrieved
 330   #  from HII database.
 331   gEfiMdeModulePkgTokenSpaceGuid.PcdDisableDefaultKeyboardLayoutInUsbKbDriver|FALSE|BOOLEAN|0x00010200
 332
 333   ## If TRUE, Setup Browser supports GUID opcodes generated from Framework HII VFR file by VFR compiler.
 334   #  If TRUE, the PeiCore will handle the framework FvHob and install FvInfo PPI for it.
 335   #  This is used to provide backward compatibility support to Framework HII and Framework FvHob.
 336   gEfiMdeModulePkgTokenSpaceGuid.PcdFrameworkCompatibilitySupport|FALSE|BOOLEAN|0x00012009
 337
 338   ## If TRUE, HelloWorld Application will print the verbose information.
 339   #  This PCD is a sample to explain FeatureFlag PCD usage.
 340   gEfiMdeModulePkgTokenSpaceGuid.PcdHelloWorldPrintEnable|TRUE|BOOLEAN|0x0001200a
 341
 342   ## If TRUE, FULL FTW protocol services (total six APIs) will be produced.
 343   #  If FASLE, only FTW Write service is available.
 344   gEfiMdeModulePkgTokenSpaceGuid.PcdFullFtwServiceEnable|TRUE|BOOLEAN|0x0001200b
 345
 346   ## If TRUE, DXE IPL must support the UEFI decompression algorithm.
 347   #  If FALSE, DXE IPL will not support UEFI decompression to save space.
 348   gEfiMdeModulePkgTokenSpaceGuid.PcdDxeIplSupportUefiDecompress|TRUE|BOOLEAN|0x0001200c
 349
 350   ## This PCD specifies whether PciBus supports the hot plug device.
 351   gEfiMdeModulePkgTokenSpaceGuid.PcdPciBusHotplugDeviceSupport|TRUE|BOOLEAN|0x0001003d
 352
 353   ## This PCD specifies whether the PCI bus driver probes non-standard,
 354   #  such as 2K/1K/512, granularity for PCI to PCI bridge I/O window.
 355   gEfiMdeModulePkgTokenSpaceGuid.PcdPciBridgeIoAlignmentProbe|FALSE|BOOLEAN|0x0001004e
 356   ## This PCD specifies whether StatusCode is reported via Serial port.
 357   gEfiMdeModulePkgTokenSpaceGuid.PcdStatusCodeUseSerial|TRUE|BOOLEAN|0x00010022
 358
 359   ## This PCD specifies whether StatusCode is stored in memory.
 360   #  The memory is boot time memory in PEI Phase and is runtime memory in DXE Phase.
 361   gEfiMdeModulePkgTokenSpaceGuid.PcdStatusCodeUseMemory|FALSE|BOOLEAN|0x00010023
 362
 363   ## This PCD specifies whether Peiphase StatusCode is replayed in DxePhase.
 364   gEfiMdeModulePkgTokenSpaceGuid.PcdStatusCodeReplayIn|FALSE|BOOLEAN|0x0001002d
 365
 366   ## This PCD specified whether ACPI SDT protocol is installed.
 367   gEfiMdeModulePkgTokenSpaceGuid.PcdInstallAcpiSdtProtocol|FALSE|BOOLEAN|0x0001004d
 368
 369   ## If TRUE, then unaligned I/O, MMIO, and PCI Configuration cycles through the PCI I/O Protocol are enabled.
 370   #  If FALSE, then unaligned I/O, MMIO, and PCI Configuration cycles through the PCI I/O Protocol are disabled.
 371   #  The default value for this PCD is to disable support for unaligned PCI I/O Protocol requests.
 372   gEfiMdeModulePkgTokenSpaceGuid.PcdUnalignedPciIoEnable|FALSE|BOOLEAN|0x0001003e
 373
 374   ## This PCD specifies whether TEXT statement is always set to GrayOut statement in HII Form Browser.
 375   #  If TRUE,  TEXT statement will always be set to GrayOut.
 376   #  If FALSE, TEXT statement will be set to GrayOut only when GrayOut condition is TRUE.
 377   gEfiMdeModulePkgTokenSpaceGuid.PcdBrowserGrayOutTextStatement|FALSE|BOOLEAN|0x0001004f
 378
 379   ## If TRUE, recovery from IDE disk will be supported.
 380   gEfiMdeModulePkgTokenSpaceGuid.PcdRecoveryOnIdeDisk|TRUE|BOOLEAN|0x00010060
 381
 382   ## If TRUE, recovery from FAT floppy disk will be supported.
 383   gEfiMdeModulePkgTokenSpaceGuid.PcdRecoveryOnFatFloppyDisk|TRUE|BOOLEAN|0x00010061
 384
 385   ## If TRUE, recovery from data CD will be supported.
 386   gEfiMdeModulePkgTokenSpaceGuid.PcdRecoveryOnDataCD|TRUE|BOOLEAN|0x00010062
 387
 388   ## If TRUE, recovery from FAT USB disk will be supported.
 389   gEfiMdeModulePkgTokenSpaceGuid.PcdRecoveryOnFatUsbDisk|TRUE|BOOLEAN|0x00010063
 390
 391 [PcdsFeatureFlag.IA32, PcdsFeatureFlag.X64]
 392   ##
 393   # This feature flag specifies whether DxeIpl switches to long mode to enter DXE phase.
 394   # If it is TRUE, DxeIpl will load a 64-bit DxeCore and switch to long mode to hand over to DxeCore;
 395   # otherwise, DxeIpl will load a 32-bit DxeCore and perform stack switch to hand over to DxeCore.
 396   # It is assumed that 64-bit DxeCore is built in firmware if it is true; otherwise 32-bit DxeCore
 397   # is built in firmware.
 398   #
 399   gEfiMdeModulePkgTokenSpaceGuid.PcdDxeIplSwitchToLongMode|TRUE|BOOLEAN|0x0001003b
 400
 401   ##
 402   # This feature flag specifies whether DxeIpl should rebuild page tables. This flag only
 403   # makes sense in the case where the DxeIpl and the DxeCore are both X64.
 404   #
 405   gEfiMdeModulePkgTokenSpaceGuid.PcdDxeIplBuildPageTables|TRUE|BOOLEAN|0x0001003c
 406
 407 [PcdsFixedAtBuild]
 408   ## Dynamic type PCD can be registered callback function for Pcd setting action.
 409   #  PcdMaxPeiPcdCallBackNumberPerPcdEntry indicate maximum number of callback function
 410   #  for a dynamic PCD used in PEI phase.
 411   gEfiMdeModulePkgTokenSpaceGuid.PcdMaxPeiPcdCallBackNumberPerPcdEntry|0x08|UINT32|0x0001000f
 412
 413   ## VPD type PCD allow developer point an absoluted physical address PcdVpdBaseAddress
 414   #  to store PCD value.
 415   #
 416   gEfiMdeModulePkgTokenSpaceGuid.PcdVpdBaseAddress|0x0|UINT32|0x00010010
 417
 418   ## Maximum number of FV is supported by PeiCore's dispatching.
 419   gEfiMdeModulePkgTokenSpaceGuid.PcdPeiCoreMaxFvSupported|6|UINT32|0x00010030
 420
 421   ## Maximum PEIM count in every FV is supported by PeiCore's dispatching.
 422   gEfiMdeModulePkgTokenSpaceGuid.PcdPeiCoreMaxPeimPerFv|32|UINT32|0x00010031
 423
 424   ## Maximum stack size for PeiCore.
 425   gEfiMdeModulePkgTokenSpaceGuid.PcdPeiCoreMaxPeiStackSize|0x20000|UINT32|0x00010032
 426
 427   ## Maximum PPI count is supported by PeiCore's PPI database.
 428   gEfiMdeModulePkgTokenSpaceGuid.PcdPeiCoreMaxPpiSupported|64|UINT32|0x00010033
 429
 430   ## Size of the NV variable range. Note that this value should less than or equal to PcdFlashNvStorageFtwSpareSize
 431   #  The root cause is that variable driver will use FTW protocol to reclaim variable region.
 432   #  If the length of variable region is larger than FTW spare size, it means the whole variable region can not
 433   #  be reflushed through the manner of fault tolerant write.
 434   gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableSize|0x0|UINT32|0x30000002
 435
 436   ## The maximum size of single common variable, that is non-HwErr type varible.
 437   gEfiMdeModulePkgTokenSpaceGuid.PcdMaxVariableSize|0x400|UINT32|0x30000003
 438
 439   ## The maximum size of single hardware error record variable.
 440   # In IA32/X64 platforms, this value should be larger than 1KB.
 441   # In IA64 platforms, this value should be larger than 128KB.
 442   gEfiMdeModulePkgTokenSpaceGuid.PcdMaxHardwareErrorVariableSize|0x8000|UINT32|0x30000004
 443
 444   ## The size of reserved HwErr variable space. Note that this value must be less than or equal to PcdFlashNvStorageVariableSize
 445   # In EdkII implementation, HwErr type variable is stored with common non-volatile variables in the same NV region.
 446   # so the platform integrator should ensure this value is less than or equal to PcdFlashNvStorageVariableSize.
 447   # this value is used to guarantee the space of HwErr type variable and not populated by common variable.
 448   gEfiMdeModulePkgTokenSpaceGuid.PcdHwErrStorageSize|0x0000|UINT32|0x30000006
 449
 450   ## The size of volatile buffer. This buffer is used to store VOLATILE attribute variable.
 451   gEfiMdeModulePkgTokenSpaceGuid.PcdVariableStoreSize|0x10000|UINT32|0x30000005
 452
 453   ## Size of the FTW spare block range. Note that this value should larger than PcdFlashNvStorageVariableSize
 454   # The root cause is that variable driver will use FTW protocol to reclaim variable region.
 455   # If the length of variable region is larger than FTW spare size, it means the whole variable region can not
 456   # be reflushed through the manner of fault tolerant write.
 457   gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareSize|0x0|UINT32|0x30000014
 458
 459   ## Size of the FTW working block range.
 460   gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingSize|0x0|UINT32|0x30000011
 461
 462   ## FFS filename to find the ACPI tables
 463   gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiTableStorageFile|{ 0x25, 0x4e, 0x37, 0x7e, 0x01, 0x8e, 0xee, 0x4f, 0x87, 0xf2, 0x39, 0xc, 0x23, 0xc6, 0x6, 0xcd }|VOID*|0x30000016
 464
 465   ## Single root I/O virtualization virtual function memory BAR alignment
 466   #  BITN set indicates 2 of n+12 power
 467   #  BIT0 set indicates 4KB alignment
 468   #  BIT1 set indicates 8KB alignment
 469   gEfiMdeModulePkgTokenSpaceGuid.PcdSrIovSystemPageSize|0x1|UINT32|0x10000047
 470
 471   ## Flag of enabling/disabling the feature of Loading Module at Fixed Address
 472   #  -1: Enable the feature as fixed offset to TOLM
 473   #   0: Disable the feature.
 474   #  Positive Value:  Enable the feature as fixed absolute address, and the value is the top memory address
 475   gEfiMdeModulePkgTokenSpaceGuid.PcdLoadModuleAtFixAddressEnable|0|UINT64|0x30001015
 476
 477   ## Smbios version
 478   gEfiMdeModulePkgTokenSpaceGuid.PcdSmbiosVersion|0x0207|UINT16|0x00010055
 479
 480   ## TFTP BlockSize. Initial value 0 means using default block size which is (MTU-IP_HEADER-UDP_HEADER-TFTP_HEADER)
 481   #  to handle all link layers. If the value is non zero, the PCD value will be used as block size.
 482   #
 483   gEfiMdeModulePkgTokenSpaceGuid.PcdTftpBlockSize|0x0|UINT64|0x30001026
 484
 485 [PcdsFixedAtBuild,PcdsPatchableInModule]
 486   ## Maximun number of performance log entries during PEI phase.
 487   gEfiMdeModulePkgTokenSpaceGuid.PcdMaxPeiPerformanceLogEntries|40|UINT8|0x0001002f
 488
 489   ## RTC Update Timeout Value
 490   gEfiMdeModulePkgTokenSpaceGuid.PcdRealTimeClockUpdateTimeout|100000|UINT32|0x00010034
 491
 492   ## If TRUE, then 16550 serial port registers are in MMIO space.
 493   #  If FALSE, then 16550 serial port registers are in I/O space.  Default value.
 494   gEfiMdeModulePkgTokenSpaceGuid.PcdSerialUseMmio|FALSE|BOOLEAN|0x00020000
 495
 496   ## If TRUE, then the 16550 serial port hardware flow control is enabled.
 497   #  If FALSE, then the 16550 serial port hardware flow control is disabled.  Default value.
 498   gEfiMdeModulePkgTokenSpaceGuid.PcdSerialUseHardwareFlowControl|FALSE|BOOLEAN|0x00020001
 499
 500   ## If TRUE, then 16550 serial Tx operations will block if DSR is not asserted (no cable).
 501   #  If FALSE, then the 16550 serial Tx operations will not be blocked if DSR is not asserted. Default value.
 502   #  This PCD is ignored if PcdSerialUseHardwareFlowControl is FALSE.
 503   gEfiMdeModulePkgTokenSpaceGuid.PcdSerialDetectCable|FALSE|BOOLEAN|0x00020006
 504
 505   ## Base address of 16550 serial port registers in MMIO or I/O space.  Default is 0x3F8.
 506   gEfiMdeModulePkgTokenSpaceGuid.PcdSerialRegisterBase|0x03F8|UINT64|0x00020002
 507
 508   ## Baud rate for the 16550 serial port.  Default is 115200 baud.
 509   gEfiMdeModulePkgTokenSpaceGuid.PcdSerialBaudRate|115200|UINT32|0x00020003
 510
 511   ## Line Control Register (LCR) for the 16550 serial port.  This encodes data bits, parity, and stop bits.
 512   #    BIT1..BIT0 - Data bits.  00b = 5 bits, 01b = 6 bits, 10b = 7 bits, 11b = 8 bits
 513   #    BIT2       - Stop Bits.  0 = 1 stop bit.  1 = 1.5 stop bits if 5 data bits selected, otherwise 2 stop bits.
 514   #    BIT5..BIT2 - Parity.  xx0b = No Parity, 001b = Odd Parity, 011b = Even Parity, 101b = Mark Parity, 111b=Stick Parity
 515   #    BIT7..BIT6 - Reserved.  Must be 0.
 516   #
 517   # Default is No Parity, 8 Data Bits, 1 Stop Bit.
 518   #
 519   gEfiMdeModulePkgTokenSpaceGuid.PcdSerialLineControl|0x03|UINT8|0x00020004
 520
 521   ## FIFO Control Register (FCR) for the 16550 serial port.
 522   #    BIT0       - FIFO Enable.  0 = Disable FIFOs.  1 = Enable FIFOs.
 523   #    BIT1       - Clear receive FIFO.  1 = Clear FIFO.
 524   #    BIT2       - Clear transmit FIFO.  1 = Clear FIFO.
 525   #    BIT4..BIT3 - Reserved.  Must be 0.
 526   #    BIT5       - Enable 64-byte FIFO.  0 = Disable 64-byte FIFO.  1 = Enable 64-byte FIFO
 527   #    BIT7..BIT6 - Reserved.  Must be 0.
 528   #
 529   # Default is to enable and clear all FIFOs.
 530   #
 531   gEfiMdeModulePkgTokenSpaceGuid.PcdSerialFifoControl|0x07|UINT8|0x00020005
 532
 533   ## Maximum address that the DXE Core will allocate the EFI_SYSTEM_TABLE_POINTER
 534   #  structure.  The default value for this PCD is 0, which means that the DXE Core
 535   #  will allocate the buffer from the EFI_SYSTEM_TABLE_POINTER structure on a 4MB
 536   #  boundary as close to the top of memory as feasible.  If this PCD is set to a
 537   #  value other than 0, then the DXE Core will first attempt to allocate the
 538   #  EFI_SYSTEM_TABLE_POINTER structure on a 4MB boundary below the address specified
 539   #  by this PCD, and if that allocation fails, retry the allocation on a 4MB
 540   #  boundary as close to the top of memory as feasible.
 541   #
 542   gEfiMdeModulePkgTokenSpaceGuid.PcdMaxEfiSystemTablePointerAddress|0x0|UINT64|0x30001027
 543
 544 [PcdsPatchableInModule, PcdsDynamic, PcdsDynamicEx]
 545   ## This PCD defines the Console output column and the default value is 25 according to UEFI spec
 546   gEfiMdeModulePkgTokenSpaceGuid.PcdConOutRow|25|UINT32|0x40000006
 547
 548   ## This PCD defines the Console output row and the default value is 80 according to UEFI spec
 549   gEfiMdeModulePkgTokenSpaceGuid.PcdConOutColumn|80|UINT32|0x40000007
 550
 551 [PcdsFixedAtBuild, PcdsDynamic, PcdsDynamicEx]
 552   ## Base address of the NV variable range in flash device
 553   gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableBase|0x0|UINT32|0x30000001
 554
 555   ## Base address of the FTW spare block range in flash device.
 556   gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareBase|0x0|UINT32|0x30000013
 557
 558   ## Base address of the FTW working block range in flash device.
 559   gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingBase|0x0|UINT32|0x30000010
 560
 561   ## 64-bit Base address of the NV variable range in flash device
 562   gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableBase64|0x0|UINT64|0x80000001
 563
 564   ## 64-bit Base address of the FTW spare block range in flash device.
 565   gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareBase64|0x0|UINT64|0x80000013
 566
 567   ## 64-bit Base address of the FTW working block range in flash device.
 568   gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingBase64|0x0|UINT64|0x80000010
 569
 570   ## This PCD defines the print string.
 571   #  This PCD is a sample to explain String typed PCD usage.
 572   gEfiMdeModulePkgTokenSpaceGuid.PcdHelloWorldPrintString|L"UEFI Hello World!\n"|VOID*|0x40000004
 573
 574   ## This PCD defines a reserved memory range for the EMU Variable driver's NV Variable Store
 575   #  The range is valid if non-zero.  The memory range size must be PcdVariableStoreSize.
 576   gEfiMdeModulePkgTokenSpaceGuid.PcdEmuVariableNvStoreReserved|0|UINT64|0x40000008
 577
 578   ## This PCD specifies whether the Single Root I/O virtualization support.
 579   gEfiMdeModulePkgTokenSpaceGuid.PcdSrIovSupport|TRUE|BOOLEAN|0x10000044
 580
 581   ## This PCD specifies whether the Alternative Routing-ID support.
 582   gEfiMdeModulePkgTokenSpaceGuid.PcdAriSupport|TRUE|BOOLEAN|0x10000045
 583
 584   ## This PCD specifies whether the Multi Root I/O virtualization support.
 585   gEfiMdeModulePkgTokenSpaceGuid.PcdMrIovSupport|FALSE|BOOLEAN|0x10000046
 586
 587 [PcdsFixedAtBuild, PcdsPatchableInModule, PcdsDynamic, PcdsDynamicEx]
 588   ## This PCD defines the times to print hello world string.
 589   #  This PCD is a sample to explain FixedAtBuild UINT32 PCD usage.
 590   gEfiMdeModulePkgTokenSpaceGuid.PcdHelloWorldPrintTimes|1|UINT32|0x40000005
 591
 592   ## Indicate the max size of the capsule image with reset flag that the platform can support.
 593   #  The default max size is 100MB (0x6400000) for more than one large capsule images.
 594   gEfiMdeModulePkgTokenSpaceGuid.PcdMaxSizePopulateCapsule|0x6400000|UINT32|0x0001001e
 595
 596   ## Indicate the max size of the capsule image without reset flag that the platform can support.
 597   #  The default max size is 10MB (0xa00000) for the casule image without reset flag setting.
 598   gEfiMdeModulePkgTokenSpaceGuid.PcdMaxSizeNonPopulateCapsule|0xa00000|UINT32|0x0001001f
 599
 600   ## Null-terminated Unicode string of the firmware vendor name that is default name filled into the EFI System Table
 601   gEfiMdeModulePkgTokenSpaceGuid.PcdFirmwareVendor|L"EDK II"|VOID*|0x00010050
 602
 603   ## Firmware revision that is default value filled into the EFI System Table
 604   gEfiMdeModulePkgTokenSpaceGuid.PcdFirmwareRevision|0x00010000|UINT32|0x00010051
 605
 606   ## Null-terminated Unicode string that described the firmware version
 607   gEfiMdeModulePkgTokenSpaceGuid.PcdFirmwareVersionString|L""|VOID*|0x00010052
 608
 609   ## Null-terminated Unicode string that contains the date the formware was released
 610   gEfiMdeModulePkgTokenSpaceGuid.PcdFirmwareReleaseDateString|L""|VOID*|0x00010053
 611
 612   ## PcdStatusCodeMemorySize is used when PcdStatusCodeUseMemory is set to true
 613   #  (PcdStatusCodeMemorySize * KBytes) is the total taken memory size.
 614   #  The default value in PeiPhase is 1 KBytes.
 615   #  The default value in DxePhase is 128 KBytes.
 616   gEfiMdeModulePkgTokenSpaceGuid.PcdStatusCodeMemorySize|1|UINT16|0x00010054
 617
 618   ## This PCD specifies whether to reset system when memory type information changes.
 619   gEfiMdeModulePkgTokenSpaceGuid.PcdResetOnMemoryTypeInformationChange|TRUE|BOOLEAN|0x00010056
 620
 621   ## Specify the foreground color for Subtile text in HII Form Browser. The default value is EFI_BLUE.
 622   #  Only following values defined in UEFI specification are valid:
 623   #  0x00 (EFI_BLACK)
 624   #  0x01 (EFI_BLUE)
 625   #  0x02 (EFI_GREEN)
 626   #  0x03 (EFI_CYAN)
 627   #  0x04 (EFI_RED)
 628   #  0x05 (EFI_MAGENTA)
 629   #  0x06 (EFI_BROWN)
 630   #  0x07 (EFI_LIGHTGRAY)
 631   #  0x08 (EFI_DARKGRAY)
 632   #  0x09 (EFI_LIGHTBLUE)
 633   #  0x0A (EFI_LIGHTGREEN)
 634   #  0x0B (EFI_LIGHTCYAN)
 635   #  0x0C (EFI_LIGHTRED)
 636   #  0x0D (EFI_LIGHTMAGENTA)
 637   #  0x0E (EFI_YELLOW)
 638   #  0x0F (EFI_WHITE)
 639   gEfiMdeModulePkgTokenSpaceGuid.PcdBrowserSubtitleTextColor|0x01|UINT8|0x00010057
 640
 641   ## Specify the foreground color for prompt and Question value text in HII Form Browser. The default value is EFI_BLACK.
 642   #  Only following values defined in UEFI specification are valid:
 643   #  0x00 (EFI_BLACK)
 644   #  0x01 (EFI_BLUE)
 645   #  0x02 (EFI_GREEN)
 646   #  0x03 (EFI_CYAN)
 647   #  0x04 (EFI_RED)
 648   #  0x05 (EFI_MAGENTA)
 649   #  0x06 (EFI_BROWN)
 650   #  0x07 (EFI_LIGHTGRAY)
 651   #  0x08 (EFI_DARKGRAY)
 652   #  0x09 (EFI_LIGHTBLUE)
 653   #  0x0A (EFI_LIGHTGREEN)
 654   #  0x0B (EFI_LIGHTCYAN)
 655   #  0x0C (EFI_LIGHTRED)
 656   #  0x0D (EFI_LIGHTMAGENTA)
 657   #  0x0E (EFI_YELLOW)
 658   #  0x0F (EFI_WHITE)
 659   gEfiMdeModulePkgTokenSpaceGuid.PcdBrowserFieldTextColor|0x00|UINT8|0x00010058
 660
 661   ## Specify the foreground color for highlighted prompt and Question value text in HII Form Browser.
 662   #  The default value is EFI_LIGHTGRAY. Only following values defined in UEFI specification are valid:
 663   #  0x00 (EFI_BLACK)
 664   #  0x01 (EFI_BLUE)
 665   #  0x02 (EFI_GREEN)
 666   #  0x03 (EFI_CYAN)
 667   #  0x04 (EFI_RED)
 668   #  0x05 (EFI_MAGENTA)
 669   #  0x06 (EFI_BROWN)
 670   #  0x07 (EFI_LIGHTGRAY)
 671   #  0x08 (EFI_DARKGRAY)
 672   #  0x09 (EFI_LIGHTBLUE)
 673   #  0x0A (EFI_LIGHTGREEN)
 674   #  0x0B (EFI_LIGHTCYAN)
 675   #  0x0C (EFI_LIGHTRED)
 676   #  0x0D (EFI_LIGHTMAGENTA)
 677   #  0x0E (EFI_YELLOW)
 678   #  0x0F (EFI_WHITE)
 679   gEfiMdeModulePkgTokenSpaceGuid.PcdBrowserFieldTextHighlightColor|0x07|UINT8|0x00010059
 680
 681   ## Specify the background color for highlighted prompt and Question value text in HII Form Browser.
 682   #  The default value is EFI_BACKGROUND_BLACK. Only following values defined in UEFI specification are valid:
 683   #  0x00 (EFI_BACKGROUND_BLACK)
 684   #  0x10 (EFI_BACKGROUND_BLUE)
 685   #  0x20 (EFI_BACKGROUND_GREEN)
 686   #  0x30 (EFI_BACKGROUND_CYAN)
 687   #  0x40 (EFI_BACKGROUND_RED)
 688   #  0x50 (EFI_BACKGROUND_MAGENTA)
 689   #  0x60 (EFI_BACKGROUND_BROWN)
 690   #  0x70 (EFI_BACKGROUND_LIGHTGRAY)
 691   gEfiMdeModulePkgTokenSpaceGuid.PcdBrowserFieldBackgroundHighlightColor|0x00|UINT8|0x0001005A
 692
 693   ## Time in second to delay for SATA devices to spin-up for recovery.
 694   gEfiMdeModulePkgTokenSpaceGuid.PcdSataSpinUpDelayInSecForRecoveryPath|15|UINT16|0x0001005B
 695
 696 [PcdsPatchableInModule]
 697   ## Specify  memory size with page number for PEI code when
 698   #  the feature of Loading Module at Fixed Address is enabled
 699   gEfiMdeModulePkgTokenSpaceGuid.PcdLoadFixAddressPeiCodePageNumber|0|UINT32|0x00000029
 700
 701   ## Specify  memory size with page number for DXE boot time code when
 702   #  the feature of Loading Module at Fixed Address is enabled
 703   gEfiMdeModulePkgTokenSpaceGuid.PcdLoadFixAddressBootTimeCodePageNumber|0|UINT32|0x0000002a
 704
 705   ## Specify  memory size with page number for DXE runtime code when
 706   #  the feature of Loading Module at Fixed Address is enabled
 707   gEfiMdeModulePkgTokenSpaceGuid.PcdLoadFixAddressRuntimeCodePageNumber|0|UINT32|0x0000002b
 708
 709   ## Specify  memory size with page number for SMM code when
 710   #  the feature of Loading Module at Fixed Address is enabled
 711   gEfiMdeModulePkgTokenSpaceGuid.PcdLoadFixAddressSmmCodePageNumber|0|UINT32|0x0000002c
 712