MdeModulePkg: Replace BSD License with BSD+Patent License

[mirror_edk2.git] / MdeModulePkg / Universal / SerialDxe / SerialIo.c

/** @file
  Serial driver that layers on top of a Serial Port Library instance.

  Copyright (c) 2008 - 2009, Apple Inc. All rights reserved.<BR>
  Copyright (c) 2013-2014, ARM Ltd. All rights reserved.<BR>
  Copyright (c) 2015, Intel Corporation. All rights reserved.<BR>

  SPDX-License-Identifier: BSD-2-Clause-Patent

**/

#include <Library/UefiBootServicesTableLib.h>
#include <Library/SerialPortLib.h>
#include <Library/DebugLib.h>
#include <Library/PcdLib.h>

#include <Protocol/SerialIo.h>
#include <Protocol/DevicePath.h>

typedef struct {
  VENDOR_DEVICE_PATH        Guid;
  UART_DEVICE_PATH          Uart;
  EFI_DEVICE_PATH_PROTOCOL  End;
} SERIAL_DEVICE_PATH;

/**
  Reset the serial device.

  @param  This              Protocol instance pointer.

  @retval EFI_SUCCESS       The device was reset.
  @retval EFI_DEVICE_ERROR  The serial device could not be reset.

**/
EFI_STATUS
EFIAPI
SerialReset (
  IN EFI_SERIAL_IO_PROTOCOL *This
  );

/**
  Sets the baud rate, receive FIFO depth, transmit/receive time out, parity,
  data bits, and stop bits on a serial device.

  @param  This             Protocol instance pointer.
  @param  BaudRate         The requested baud rate. A BaudRate value of 0 will use the the
                           device's default interface speed.
  @param  ReceiveFifoDepth The requested depth of the FIFO on the receive side of the
                           serial interface. A ReceiveFifoDepth value of 0 will use
                           the device's default FIFO depth.
  @param  Timeout          The requested time out for a single character in microseconds.
                           This timeout applies to both the transmit and receive side of the
                           interface. A Timeout value of 0 will use the device's default time
                           out value.
  @param  Parity           The type of parity to use on this serial device. A Parity value of
                           DefaultParity will use the device's default parity value.
  @param  DataBits         The number of data bits to use on the serial device. A DataBits
                           value of 0 will use the device's default data bit setting.
  @param  StopBits         The number of stop bits to use on this serial device. A StopBits
                           value of DefaultStopBits will use the device's default number of
                           stop bits.

  @retval EFI_SUCCESS           The device was reset.
  @retval EFI_INVALID_PARAMETER One or more attributes has an unsupported value.
  @retval EFI_DEVICE_ERROR      The serial device is not functioning correctly.

**/
EFI_STATUS
EFIAPI
SerialSetAttributes (
  IN EFI_SERIAL_IO_PROTOCOL *This,
  IN UINT64                 BaudRate,
  IN UINT32                 ReceiveFifoDepth,
  IN UINT32                 Timeout,
  IN EFI_PARITY_TYPE        Parity,
  IN UINT8                  DataBits,
  IN EFI_STOP_BITS_TYPE     StopBits
  );

/**
  Set the control bits on a serial device

  @param  This             Protocol instance pointer.
  @param  Control          Set the bits of Control that are settable.

  @retval EFI_SUCCESS      The new control bits were set on the serial device.
  @retval EFI_UNSUPPORTED  The serial device does not support this operation.
  @retval EFI_DEVICE_ERROR The serial device is not functioning correctly.

**/
EFI_STATUS
EFIAPI
SerialSetControl (
  IN EFI_SERIAL_IO_PROTOCOL *This,
  IN UINT32                 Control
  );

/**
  Retrieves the status of the control bits on a serial device

  @param  This              Protocol instance pointer.
  @param  Control           A pointer to return the current Control signals from the serial device.

  @retval EFI_SUCCESS       The control bits were read from the serial device.
  @retval EFI_DEVICE_ERROR  The serial device is not functioning correctly.

**/
EFI_STATUS
EFIAPI
SerialGetControl (
  IN EFI_SERIAL_IO_PROTOCOL *This,
  OUT UINT32                *Control
  );

/**
  Writes data to a serial device.

  @param  This              Protocol instance pointer.
  @param  BufferSize        On input, the size of the Buffer. On output, the amount of
                            data actually written.
  @param  Buffer            The buffer of data to write

  @retval EFI_SUCCESS       The data was written.
  @retval EFI_DEVICE_ERROR  The device reported an error.
  @retval EFI_TIMEOUT       The data write was stopped due to a timeout.

**/
EFI_STATUS
EFIAPI
SerialWrite (
  IN EFI_SERIAL_IO_PROTOCOL *This,
  IN OUT UINTN              *BufferSize,
  IN VOID                   *Buffer
  );

/**
  Reads data from a serial device.

  @param  This              Protocol instance pointer.
  @param  BufferSize        On input, the size of the Buffer. On output, the amount of
                            data returned in Buffer.
  @param  Buffer            The buffer to return the data into.

  @retval EFI_SUCCESS       The data was read.
  @retval EFI_DEVICE_ERROR  The device reported an error.
  @retval EFI_TIMEOUT       The data write was stopped due to a timeout.

**/
EFI_STATUS
EFIAPI
SerialRead (
  IN EFI_SERIAL_IO_PROTOCOL *This,
  IN OUT UINTN              *BufferSize,
  OUT VOID                  *Buffer
  );

EFI_HANDLE mSerialHandle = NULL;

SERIAL_DEVICE_PATH mSerialDevicePath = {
  {
    { HARDWARE_DEVICE_PATH, HW_VENDOR_DP, { sizeof (VENDOR_DEVICE_PATH), 0} },
    EFI_CALLER_ID_GUID  // Use the driver's GUID
  },
  {
    { MESSAGING_DEVICE_PATH, MSG_UART_DP, { sizeof (UART_DEVICE_PATH), 0} },
    0,                  // Reserved
    0,                  // BaudRate
    0,                  // DataBits
    0,                  // Parity
    0                   // StopBits
  },
  { END_DEVICE_PATH_TYPE, END_ENTIRE_DEVICE_PATH_SUBTYPE, { sizeof (EFI_DEVICE_PATH_PROTOCOL), 0 } }
};

//
// Template used to initialize the Serial IO protocols.
//
EFI_SERIAL_IO_MODE mSerialIoMode = {
  //
  //    value  field                set in SerialDxeInitialize()?
  //---------  -------------------  -----------------------------
            0, // ControlMask
  1000 * 1000, // Timeout
            0, // BaudRate          yes
            1, // ReceiveFifoDepth
            0, // DataBits          yes
            0, // Parity            yes
            0  // StopBits          yes
};

EFI_SERIAL_IO_PROTOCOL mSerialIoTemplate = {
  SERIAL_IO_INTERFACE_REVISION,
  SerialReset,
  SerialSetAttributes,
  SerialSetControl,
  SerialGetControl,
  SerialWrite,
  SerialRead,
  &mSerialIoMode
};

/**
  Reset the serial device.

  @param  This              Protocol instance pointer.

  @retval EFI_SUCCESS       The device was reset.
  @retval EFI_DEVICE_ERROR  The serial device could not be reset.

**/
EFI_STATUS
EFIAPI
SerialReset (
  IN EFI_SERIAL_IO_PROTOCOL *This
  )
{
  EFI_STATUS    Status;

  Status = SerialPortInitialize ();
  if (EFI_ERROR (Status)) {
    return Status;
  }

  //
  // Go set the current attributes
  //
  Status = This->SetAttributes (
                   This,
                   This->Mode->BaudRate,
                   This->Mode->ReceiveFifoDepth,
                   This->Mode->Timeout,
                   (EFI_PARITY_TYPE) This->Mode->Parity,
                   (UINT8) This->Mode->DataBits,
                   (EFI_STOP_BITS_TYPE) This->Mode->StopBits
                   );

  //
  // The serial device may not support some of the attributes. To prevent
  // later failure, always return EFI_SUCCESS when SetAttributes is returning
  // EFI_INVALID_PARAMETER.
  //
  if (Status == EFI_INVALID_PARAMETER) {
    return EFI_SUCCESS;
  }

  return Status;
}

/**
  Sets the baud rate, receive FIFO depth, transmit/receive time out, parity,
  data bits, and stop bits on a serial device.

  @param  This             Protocol instance pointer.
  @param  BaudRate         The requested baud rate. A BaudRate value of 0 will use the the
                           device's default interface speed.
  @param  ReceiveFifoDepth The requested depth of the FIFO on the receive side of the
                           serial interface. A ReceiveFifoDepth value of 0 will use
                           the device's default FIFO depth.
  @param  Timeout          The requested time out for a single character in microseconds.
                           This timeout applies to both the transmit and receive side of the
                           interface. A Timeout value of 0 will use the device's default time
                           out value.
  @param  Parity           The type of parity to use on this serial device. A Parity value of
                           DefaultParity will use the device's default parity value.
  @param  DataBits         The number of data bits to use on the serial device. A DataBits
                           value of 0 will use the device's default data bit setting.
  @param  StopBits         The number of stop bits to use on this serial device. A StopBits
                           value of DefaultStopBits will use the device's default number of
                           stop bits.

  @retval EFI_SUCCESS           The device was reset.
  @retval EFI_INVALID_PARAMETER One or more attributes has an unsupported value.
  @retval EFI_DEVICE_ERROR      The serial device is not functioning correctly.

**/
EFI_STATUS
EFIAPI
SerialSetAttributes (
  IN EFI_SERIAL_IO_PROTOCOL *This,
  IN UINT64                 BaudRate,
  IN UINT32                 ReceiveFifoDepth,
  IN UINT32                 Timeout,
  IN EFI_PARITY_TYPE        Parity,
  IN UINT8                  DataBits,
  IN EFI_STOP_BITS_TYPE     StopBits
  )
{
  EFI_STATUS                Status;
  EFI_TPL                   Tpl;
  UINT64                    OriginalBaudRate;
  UINT32                    OriginalReceiveFifoDepth;
  UINT32                    OriginalTimeout;
  EFI_PARITY_TYPE           OriginalParity;
  UINT8                     OriginalDataBits;
  EFI_STOP_BITS_TYPE        OriginalStopBits;

  //
  // Preserve the original input values in case
  // SerialPortSetAttributes() updates the input/output
  // parameters even on error.
  //
  OriginalBaudRate = BaudRate;
  OriginalReceiveFifoDepth = ReceiveFifoDepth;
  OriginalTimeout = Timeout;
  OriginalParity = Parity;
  OriginalDataBits = DataBits;
  OriginalStopBits = StopBits;
  Status = SerialPortSetAttributes (&BaudRate, &ReceiveFifoDepth, &Timeout, &Parity, &DataBits, &StopBits);
  if (EFI_ERROR (Status)) {
    //
    // If it is just to set Timeout value and unsupported is returned,
    // do not return error.
    //
    if ((Status == EFI_UNSUPPORTED) &&
        (This->Mode->Timeout          != OriginalTimeout) &&
        (This->Mode->ReceiveFifoDepth == OriginalReceiveFifoDepth) &&
        (This->Mode->BaudRate         == OriginalBaudRate) &&
        (This->Mode->DataBits         == (UINT32) OriginalDataBits) &&
        (This->Mode->Parity           == (UINT32) OriginalParity) &&
        (This->Mode->StopBits         == (UINT32) OriginalStopBits)) {
      //
      // Restore to the original input values.
      //
      BaudRate = OriginalBaudRate;
      ReceiveFifoDepth = OriginalReceiveFifoDepth;
      Timeout = OriginalTimeout;
      Parity = OriginalParity;
      DataBits = OriginalDataBits;
      StopBits = OriginalStopBits;
      Status = EFI_SUCCESS;
    } else if (Status == EFI_INVALID_PARAMETER || Status == EFI_UNSUPPORTED) {
      return EFI_INVALID_PARAMETER;
    } else {
      return EFI_DEVICE_ERROR;
    }
  }

  //
  // Set the Serial I/O mode and update the device path
  //

  Tpl = gBS->RaiseTPL (TPL_NOTIFY);

  //
  // Set the Serial I/O mode
  //
  This->Mode->ReceiveFifoDepth  = ReceiveFifoDepth;
  This->Mode->Timeout           = Timeout;
  This->Mode->BaudRate          = BaudRate;
  This->Mode->DataBits          = (UINT32) DataBits;
  This->Mode->Parity            = (UINT32) Parity;
  This->Mode->StopBits          = (UINT32) StopBits;

  //
  // Check if the device path has actually changed
  //
  if (mSerialDevicePath.Uart.BaudRate == BaudRate &&
      mSerialDevicePath.Uart.DataBits == DataBits &&
      mSerialDevicePath.Uart.Parity   == (UINT8) Parity &&
      mSerialDevicePath.Uart.StopBits == (UINT8) StopBits
     ) {
    gBS->RestoreTPL (Tpl);
    return EFI_SUCCESS;
  }

  //
  // Update the device path
  //
  mSerialDevicePath.Uart.BaudRate = BaudRate;
  mSerialDevicePath.Uart.DataBits = DataBits;
  mSerialDevicePath.Uart.Parity   = (UINT8) Parity;
  mSerialDevicePath.Uart.StopBits = (UINT8) StopBits;

  Status = gBS->ReinstallProtocolInterface (
                  mSerialHandle,
                  &gEfiDevicePathProtocolGuid,
                  &mSerialDevicePath,
                  &mSerialDevicePath
                  );

  gBS->RestoreTPL (Tpl);

  return Status;
}

/**
  Set the control bits on a serial device

  @param  This             Protocol instance pointer.
  @param  Control          Set the bits of Control that are settable.

  @retval EFI_SUCCESS      The new control bits were set on the serial device.
  @retval EFI_UNSUPPORTED  The serial device does not support this operation.
  @retval EFI_DEVICE_ERROR The serial device is not functioning correctly.

**/
EFI_STATUS
EFIAPI
SerialSetControl (
  IN EFI_SERIAL_IO_PROTOCOL *This,
  IN UINT32                 Control
  )
{
  return SerialPortSetControl (Control);
}

/**
  Retrieves the status of the control bits on a serial device

  @param  This              Protocol instance pointer.
  @param  Control           A pointer to return the current Control signals from the serial device.

  @retval EFI_SUCCESS       The control bits were read from the serial device.
  @retval EFI_DEVICE_ERROR  The serial device is not functioning correctly.

**/
EFI_STATUS
EFIAPI
SerialGetControl (
  IN EFI_SERIAL_IO_PROTOCOL *This,
  OUT UINT32                *Control
  )
{
  return SerialPortGetControl (Control);
}

/**
  Writes data to a serial device.

  @param  This              Protocol instance pointer.
  @param  BufferSize        On input, the size of the Buffer. On output, the amount of
                            data actually written.
  @param  Buffer            The buffer of data to write

  @retval EFI_SUCCESS       The data was written.
  @retval EFI_DEVICE_ERROR  The device reported an error.
  @retval EFI_TIMEOUT       The data write was stopped due to a timeout.

**/
EFI_STATUS
EFIAPI
SerialWrite (
  IN EFI_SERIAL_IO_PROTOCOL *This,
  IN OUT UINTN              *BufferSize,
  IN VOID                   *Buffer
  )
{
  UINTN Count;

  Count = SerialPortWrite (Buffer, *BufferSize);

  if (Count != *BufferSize) {
    *BufferSize = Count;
    return EFI_TIMEOUT;
  }

  return EFI_SUCCESS;
}

/**
  Reads data from a serial device.

  @param  This              Protocol instance pointer.
  @param  BufferSize        On input, the size of the Buffer. On output, the amount of
                            data returned in Buffer.
  @param  Buffer            The buffer to return the data into.

  @retval EFI_SUCCESS       The data was read.
  @retval EFI_DEVICE_ERROR  The device reported an error.
  @retval EFI_TIMEOUT       The data write was stopped due to a timeout.

**/
EFI_STATUS
EFIAPI
SerialRead (
  IN EFI_SERIAL_IO_PROTOCOL *This,
  IN OUT UINTN              *BufferSize,
  OUT VOID                  *Buffer
  )
{
  UINTN Count;
  UINTN TimeOut;

  Count = 0;

  while (Count < *BufferSize) {
    TimeOut = 0;
    while (TimeOut < mSerialIoMode.Timeout) {
      if (SerialPortPoll ()) {
        break;
      }
      gBS->Stall (10);
      TimeOut += 10;
    }
    if (TimeOut >= mSerialIoMode.Timeout) {
      break;
    }
    SerialPortRead (Buffer, 1);
    Count++;
    Buffer = (VOID *) ((UINT8 *) Buffer + 1);
  }

  if (Count != *BufferSize) {
    *BufferSize = Count;
    return EFI_TIMEOUT;
  }

  return EFI_SUCCESS;
}

/**
  Initialization for the Serial Io Protocol.

  @param[in] ImageHandle    The firmware allocated handle for the EFI image.
  @param[in] SystemTable    A pointer to the EFI System Table.

  @retval EFI_SUCCESS       The entry point is executed successfully.
  @retval other             Some error occurs when executing this entry point.

**/
EFI_STATUS
EFIAPI
SerialDxeInitialize (
  IN EFI_HANDLE         ImageHandle,
  IN EFI_SYSTEM_TABLE   *SystemTable
  )
{
  EFI_STATUS            Status;

  mSerialIoMode.BaudRate = PcdGet64 (PcdUartDefaultBaudRate);
  mSerialIoMode.DataBits = (UINT32) PcdGet8 (PcdUartDefaultDataBits);
  mSerialIoMode.Parity   = (UINT32) PcdGet8 (PcdUartDefaultParity);
  mSerialIoMode.StopBits = (UINT32) PcdGet8 (PcdUartDefaultStopBits);
  mSerialIoMode.ReceiveFifoDepth = PcdGet16 (PcdUartDefaultReceiveFifoDepth);
  mSerialDevicePath.Uart.BaudRate = PcdGet64 (PcdUartDefaultBaudRate);
  mSerialDevicePath.Uart.DataBits = PcdGet8 (PcdUartDefaultDataBits);
  mSerialDevicePath.Uart.Parity   = PcdGet8 (PcdUartDefaultParity);
  mSerialDevicePath.Uart.StopBits = PcdGet8 (PcdUartDefaultStopBits);

  //
  // Issue a reset to initialize the Serial Port
  //
  Status = mSerialIoTemplate.Reset (&mSerialIoTemplate);
  if (EFI_ERROR (Status)) {
    return Status;
  }

  //
  // Make a new handle with Serial IO protocol and its device path on it.
  //
  Status = gBS->InstallMultipleProtocolInterfaces (
                  &mSerialHandle,
                  &gEfiSerialIoProtocolGuid,   &mSerialIoTemplate,
                  &gEfiDevicePathProtocolGuid, &mSerialDevicePath,
                  NULL
                  );
  ASSERT_EFI_ERROR (Status);

  return Status;
}