2 Block IO protocol as defined in the UEFI 2.0 specification.
4 The Block IO protocol is used to abstract block devices like hard drives,
5 DVD-ROMs and floppy drives.
7 Copyright (c) 2006 - 2008, Intel Corporation
8 All rights reserved. This program and the accompanying materials
9 are licensed and made available under the terms and conditions of the BSD License
10 which accompanies this distribution. The full text of the license may be found at
11 http://opensource.org/licenses/bsd-license.php
13 THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
14 WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
18 #ifndef __BLOCK_IO_H__
19 #define __BLOCK_IO_H__
21 #define EFI_BLOCK_IO_PROTOCOL_GUID \
23 0x964e5b21, 0x6459, 0x11d2, {0x8e, 0x39, 0x0, 0xa0, 0xc9, 0x69, 0x72, 0x3b } \
26 typedef struct _EFI_BLOCK_IO_PROTOCOL EFI_BLOCK_IO_PROTOCOL
;
29 /// Protocol GUID name defined in EFI1.1.
31 #define BLOCK_IO_PROTOCOL EFI_BLOCK_IO_PROTOCOL_GUID
34 /// Protocol defined in EFI1.1.
36 typedef EFI_BLOCK_IO_PROTOCOL EFI_BLOCK_IO
;
39 Reset the Block Device.
41 @param This Protocol instance pointer.
42 @param ExtendedVerification Driver may perform diagnostics on reset.
44 @retval EFI_SUCCESS The device was reset.
45 @retval EFI_DEVICE_ERROR The device is not functioning properly and could
51 (EFIAPI
*EFI_BLOCK_RESET
)(
52 IN EFI_BLOCK_IO_PROTOCOL
*This
,
53 IN BOOLEAN ExtendedVerification
58 Read BufferSize bytes from Lba into Buffer.
60 @param This Protocol instance pointer.
61 @param MediaId Id of the media, changes every time the media is replaced.
62 @param Lba The starting Logical Block Address to read from
63 @param BufferSize Size of Buffer, must be a multiple of device block size.
64 @param Buffer Buffer containing read data
66 @retval EFI_SUCCESS The data was read correctly from the device.
67 @retval EFI_DEVICE_ERROR The device reported an error while performing the read.
68 @retval EFI_NO_MEDIA There is no media in the device.
69 @retval EFI_MEDIA_CHANGED The MediaId does not matched the current device.
70 @retval EFI_BAD_BUFFER_SIZE The Buffer was not a multiple of the block size of the device.
71 @retval EFI_INVALID_PARAMETER The read request contains device addresses that are not
77 (EFIAPI
*EFI_BLOCK_READ
)(
78 IN EFI_BLOCK_IO_PROTOCOL
*This
,
87 Write BufferSize bytes from Lba into Buffer.
89 @param This Protocol instance pointer.
90 @param MediaId Id of the media, changes every time the media is replaced.
91 @param Lba The starting Logical Block Address to read from
92 @param BufferSize Size of Buffer, must be a multiple of device block size.
93 @param Buffer Buffer containing read data
95 @retval EFI_SUCCESS The data was written correctly to the device.
96 @retval EFI_WRITE_PROTECTED The device can not be written to.
97 @retval EFI_DEVICE_ERROR The device reported an error while performing the write.
98 @retval EFI_NO_MEDIA There is no media in the device.
99 @retval EFI_MEDIA_CHNAGED The MediaId does not matched the current device.
100 @retval EFI_BAD_BUFFER_SIZE The Buffer was not a multiple of the block size of the device.
101 @retval EFI_INVALID_PARAMETER The write request contains a LBA that is not
102 valid for the device.
107 (EFIAPI
*EFI_BLOCK_WRITE
)(
108 IN EFI_BLOCK_IO_PROTOCOL
*This
,
117 Flush the Block Device.
119 @param This Protocol instance pointer.
121 @retval EFI_SUCCESS All outstanding data was written to the device
122 @retval EFI_DEVICE_ERROR The device reported an error while writting back the data
123 @retval EFI_NO_MEDIA There is no media in the device.
128 (EFIAPI
*EFI_BLOCK_FLUSH
)(
129 IN EFI_BLOCK_IO_PROTOCOL
*This
134 Block IO read only mode data and updated only via members of BlockIO
137 The curent media Id. If the media changes, this value is changed.
139 @param RemovableMedia
140 TRUE if the media is removable; otherwise, FALSE.
143 TRUE if there is a media currently present in the device;
144 othersise, FALSE. THis field shows the media present status
145 as of the most recent ReadBlocks() or WriteBlocks() call.
147 @param LogicalPartition
148 TRUE if LBA 0 is the first block of a partition; otherwise
149 FALSE. For media with only one partition this would be TRUE.
152 TRUE if the media is marked read-only otherwise, FALSE.
153 This field shows the read-only status as of the most recent WriteBlocks () call.
156 TRUE if the WriteBlock () function caches write data.
159 The intrinsic block size of the device. If the media changes, then
160 this field is updated.
163 Supplies the alignment requirement for any buffer to read or write block(s).
166 The last logical block address on the device.
167 If the media changes, then this field is updated.
172 BOOLEAN RemovableMedia
;
173 BOOLEAN MediaPresent
;
174 BOOLEAN LogicalPartition
;
176 BOOLEAN WriteCaching
;
180 } EFI_BLOCK_IO_MEDIA
;
182 #define EFI_BLOCK_IO_PROTOCOL_REVISION 0x00010000
184 // Revision defined in EFI1.1.
186 #define EFI_BLOCK_IO_INTERFACE_REVISION EFI_BLOCK_IO_PROTOCOL_REVISION
189 @par Protocol Description:
190 This protocol provides control over block devices.
193 The revision to which the block IO interface adheres. All future
194 revisions must be backwards compatible. If a future version is not
195 back wards compatible, it is not the same GUID.
198 A pointer to the EFI_BLOCK_IO_MEDIA data for this device.
201 Resets the block device hardware.
204 Reads the requested number of blocks from the device.
207 Writes the requested number of blocks to the device.
210 Flushes and cache blocks. This function is optional and only
211 needs to be supported on block devices that cache writes.
213 struct _EFI_BLOCK_IO_PROTOCOL
{
216 EFI_BLOCK_IO_MEDIA
*Media
;
218 EFI_BLOCK_RESET Reset
;
219 EFI_BLOCK_READ ReadBlocks
;
220 EFI_BLOCK_WRITE WriteBlocks
;
221 EFI_BLOCK_FLUSH FlushBlocks
;
225 extern EFI_GUID gEfiBlockIoProtocolGuid
;