NetworkPkg/IScsiDxe/IScsiMisc.c

   1 /** @file
   2   Miscellaneous routines for iSCSI driver.
   3
   4 Copyright (c) 2004 - 2014, Intel Corporation. All rights reserved.<BR>
   5 This program and the accompanying materials
   6 are licensed and made available under the terms and conditions of the BSD License
   7 which accompanies this distribution.  The full text of the license may be found at
   8 http://opensource.org/licenses/bsd-license.php
   9
  10 THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
  11 WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
  12
  13 **/
  14
  15 #include "IScsiImpl.h"
  16
  17 GLOBAL_REMOVE_IF_UNREFERENCED CONST CHAR8  IScsiHexString[] = "0123456789ABCDEFabcdef";
  18
  19 /**
  20   Removes (trims) specified leading and trailing characters from a string.
  21
  22   @param[in, out] Str   Pointer to the null-terminated string to be trimmed.
  23                         On return, Str will hold the trimmed string.
  24
  25   @param[in]      CharC Character will be trimmed from str.
  26
  27 **/
  28 VOID
  29 IScsiStrTrim (
  30   IN OUT CHAR16   *Str,
  31   IN     CHAR16   CharC
  32   )
  33 {
  34   CHAR16  *Pointer1;
  35   CHAR16  *Pointer2;
  36
  37   if (*Str == 0) {
  38     return ;
  39   }
  40
  41   //
  42   // Trim off the leading and trailing characters c
  43   //
  44   for (Pointer1 = Str; (*Pointer1 != 0) && (*Pointer1 == CharC); Pointer1++) {
  45     ;
  46   }
  47
  48   Pointer2 = Str;
  49   if (Pointer2 == Pointer1) {
  50     while (*Pointer1 != 0) {
  51       Pointer2++;
  52       Pointer1++;
  53     }
  54   } else {
  55     while (*Pointer1 != 0) {
  56     *Pointer2 = *Pointer1;
  57     Pointer1++;
  58     Pointer2++;
  59     }
  60     *Pointer2 = 0;
  61   }
  62
  63
  64   for (Pointer1 = Str + StrLen(Str) - 1; Pointer1 >= Str && *Pointer1 == CharC; Pointer1--) {
  65     ;
  66   }
  67   if  (Pointer1 !=  Str + StrLen(Str) - 1) {
  68     *(Pointer1 + 1) = 0;
  69   }
  70 }
  71
  72 /**
  73   Calculate the prefix length of the IPv4 subnet mask.
  74
  75   @param[in]  SubnetMask The IPv4 subnet mask.
  76
  77   @return     The prefix length of the subnet mask.
  78   @retval 0   Other errors as indicated.
  79
  80 **/
  81 UINT8
  82 IScsiGetSubnetMaskPrefixLength (
  83   IN EFI_IPv4_ADDRESS  *SubnetMask
  84   )
  85 {
  86   UINT8   Len;
  87   UINT32  ReverseMask;
  88
  89   //
  90   // The SubnetMask is in network byte order.
  91   //
  92   ReverseMask = (SubnetMask->Addr[0] << 24) | (SubnetMask->Addr[1] << 16) | (SubnetMask->Addr[2] << 8) | (SubnetMask->Addr[3]);
  93
  94   //
  95   // Reverse it.
  96   //
  97   ReverseMask = ~ReverseMask;
  98
  99   if ((ReverseMask & (ReverseMask + 1)) != 0) {
 100     return 0;
 101   }
 102
 103   Len = 0;
 104
 105   while (ReverseMask != 0) {
 106     ReverseMask = ReverseMask >> 1;
 107     Len++;
 108   }
 109
 110   return (UINT8) (32 - Len);
 111 }
 112
 113
 114 /**
 115   Convert the hexadecimal encoded LUN string into the 64-bit LUN.
 116
 117   @param[in]   Str             The hexadecimal encoded LUN string.
 118   @param[out]  Lun             Storage to return the 64-bit LUN.
 119
 120   @retval EFI_SUCCESS            The 64-bit LUN is stored in Lun.
 121   @retval EFI_INVALID_PARAMETER  The string is malformatted.
 122
 123 **/
 124 EFI_STATUS
 125 IScsiAsciiStrToLun (
 126   IN  CHAR8  *Str,
 127   OUT UINT8  *Lun
 128   )
 129 {
 130   UINTN   Index, IndexValue, IndexNum, SizeStr;
 131   CHAR8   TemStr[2];
 132   UINT8   TemValue;
 133   UINT16  Value[4];
 134
 135   ZeroMem (Lun, 8);
 136   ZeroMem (TemStr, 2);
 137   ZeroMem ((UINT8 *) Value, sizeof (Value));
 138   SizeStr    = AsciiStrLen (Str);
 139   IndexValue = 0;
 140   IndexNum   = 0;
 141
 142   for (Index = 0; Index < SizeStr; Index ++) {
 143     TemStr[0] = Str[Index];
 144     TemValue = (UINT8) AsciiStrHexToUint64 (TemStr);
 145     if (TemValue == 0 && TemStr[0] != '0') {
 146       if ((TemStr[0] != '-') || (IndexNum == 0)) {
 147         //
 148         // Invalid Lun Char.
 149         //
 150         return EFI_INVALID_PARAMETER;
 151       }
 152     }
 153
 154     if ((TemValue == 0) && (TemStr[0] == '-')) {
 155       //
 156       // Next Lun value.
 157       //
 158       if (++IndexValue >= 4) {
 159         //
 160         // Max 4 Lun value.
 161         //
 162         return EFI_INVALID_PARAMETER;
 163       }
 164       //
 165       // Restart str index for the next lun value.
 166       //
 167       IndexNum = 0;
 168       continue;
 169     }
 170
 171     if (++IndexNum > 4) {
 172       //
 173       // Each Lun Str can't exceed size 4, because it will be as UINT16 value.
 174       //
 175       return EFI_INVALID_PARAMETER;
 176     }
 177
 178     //
 179     // Combine UINT16 value.
 180     //
 181     Value[IndexValue] = (UINT16) ((Value[IndexValue] << 4) + TemValue);
 182   }
 183
 184   for (Index = 0; Index <= IndexValue; Index ++) {
 185     *((UINT16 *) &Lun[Index * 2]) =  HTONS (Value[Index]);
 186   }
 187
 188   return EFI_SUCCESS;
 189 }
 190
 191 /**
 192   Convert the 64-bit LUN into the hexadecimal encoded LUN string.
 193
 194   @param[in]   Lun The 64-bit LUN.
 195   @param[out]  Str The storage to return the hexadecimal encoded LUN string.
 196
 197 **/
 198 VOID
 199 IScsiLunToUnicodeStr (
 200   IN UINT8    *Lun,
 201   OUT CHAR16  *Str
 202   )
 203 {
 204   UINTN   Index;
 205   CHAR16  *TempStr;
 206
 207   TempStr = Str;
 208
 209   for (Index = 0; Index < 4; Index++) {
 210
 211     if ((Lun[2 * Index] | Lun[2 * Index + 1]) == 0) {
 212       CopyMem (TempStr, L"0-", sizeof (L"0-"));
 213     } else {
 214       TempStr[0]  = (CHAR16) IScsiHexString[Lun[2 * Index] >> 4];
 215       TempStr[1]  = (CHAR16) IScsiHexString[Lun[2 * Index] & 0x0F];
 216       TempStr[2]  = (CHAR16) IScsiHexString[Lun[2 * Index + 1] >> 4];
 217       TempStr[3]  = (CHAR16) IScsiHexString[Lun[2 * Index + 1] & 0x0F];
 218       TempStr[4]  = L'-';
 219       TempStr[5]  = 0;
 220
 221       IScsiStrTrim (TempStr, L'0');
 222     }
 223
 224     TempStr += StrLen (TempStr);
 225   }
 226   //
 227   // Remove the last '-'
 228   //
 229   ASSERT (StrLen(Str) >= 1);
 230   Str[StrLen (Str) - 1] = 0;
 231
 232   for (Index = StrLen (Str) - 1; Index > 1; Index = Index - 2) {
 233     if ((Str[Index] == L'0') && (Str[Index - 1] == L'-')) {
 234       Str[Index - 1] = 0;
 235     } else {
 236       break;
 237     }
 238   }
 239 }
 240
 241 /**
 242   Convert the formatted IP address into the binary IP address.
 243
 244   @param[in]   Str               The UNICODE string.
 245   @param[in]   IpMode            Indicates whether the IP address is v4 or v6.
 246   @param[out]  Ip                The storage to return the ASCII string.
 247
 248   @retval EFI_SUCCESS            The binary IP address is returned in Ip.
 249   @retval EFI_INVALID_PARAMETER  The IP string is malformatted or IpMode is
 250                                  invalid.
 251
 252 **/
 253 EFI_STATUS
 254 IScsiAsciiStrToIp (
 255   IN  CHAR8             *Str,
 256   IN  UINT8             IpMode,
 257   OUT EFI_IP_ADDRESS    *Ip
 258   )
 259 {
 260   EFI_STATUS            Status;
 261
 262   if (IpMode == IP_MODE_IP4 || IpMode == IP_MODE_AUTOCONFIG_IP4) {
 263     return NetLibAsciiStrToIp4 (Str, &Ip->v4);
 264
 265   } else if (IpMode == IP_MODE_IP6 || IpMode == IP_MODE_AUTOCONFIG_IP6) {
 266     return NetLibAsciiStrToIp6 (Str, &Ip->v6);
 267
 268   } else if (IpMode == IP_MODE_AUTOCONFIG) {
 269     Status = NetLibAsciiStrToIp4 (Str, &Ip->v4);
 270     if (!EFI_ERROR (Status)) {
 271       return Status;
 272     }
 273     return NetLibAsciiStrToIp6 (Str, &Ip->v6);
 274
 275   }
 276
 277   return EFI_INVALID_PARAMETER;
 278 }
 279
 280 /**
 281   Convert the mac address into a hexadecimal encoded "-" seperated string.
 282
 283   @param[in]  Mac     The mac address.
 284   @param[in]  Len     Length in bytes of the mac address.
 285   @param[in]  VlanId  VLAN ID of the network device.
 286   @param[out] Str     The storage to return the mac string.
 287
 288 **/
 289 VOID
 290 IScsiMacAddrToStr (
 291   IN  EFI_MAC_ADDRESS  *Mac,
 292   IN  UINT32           Len,
 293   IN  UINT16           VlanId,
 294   OUT CHAR16           *Str
 295   )
 296 {
 297   UINT32  Index;
 298   CHAR16  *String;
 299
 300   for (Index = 0; Index < Len; Index++) {
 301     Str[3 * Index]      = (CHAR16) IScsiHexString[(Mac->Addr[Index] >> 4) & 0x0F];
 302     Str[3 * Index + 1]  = (CHAR16) IScsiHexString[Mac->Addr[Index] & 0x0F];
 303     Str[3 * Index + 2]  = L':';
 304   }
 305
 306   String = &Str[3 * Index - 1] ;
 307   if (VlanId != 0) {
 308     String += UnicodeSPrint (String, 6 * sizeof (CHAR16), L"\\%04x", (UINTN) VlanId);
 309   }
 310
 311   *String = L'\0';
 312 }
 313
 314 /**
 315   Convert the binary encoded buffer into a hexadecimal encoded string.
 316
 317   @param[in]       BinBuffer   The buffer containing the binary data.
 318   @param[in]       BinLength   Length of the binary buffer.
 319   @param[in, out]  HexStr      Pointer to the string.
 320   @param[in, out]  HexLength   The length of the string.
 321
 322   @retval EFI_SUCCESS          The binary data is converted to the hexadecimal string
 323                                and the length of the string is updated.
 324   @retval EFI_BUFFER_TOO_SMALL The string is too small.
 325   @retval EFI_INVALID_PARAMETER The IP string is malformatted.
 326
 327 **/
 328 EFI_STATUS
 329 IScsiBinToHex (
 330   IN     UINT8  *BinBuffer,
 331   IN     UINT32 BinLength,
 332   IN OUT CHAR8  *HexStr,
 333   IN OUT UINT32 *HexLength
 334   )
 335 {
 336   UINTN Index;
 337
 338   if ((HexStr == NULL) || (BinBuffer == NULL) || (BinLength == 0)) {
 339     return EFI_INVALID_PARAMETER;
 340   }
 341
 342   if (((*HexLength) - 3) < BinLength * 2) {
 343     *HexLength = BinLength * 2 + 3;
 344     return EFI_BUFFER_TOO_SMALL;
 345   }
 346
 347   *HexLength = BinLength * 2 + 3;
 348   //
 349   // Prefix for Hex String.
 350   //
 351   HexStr[0] = '0';
 352   HexStr[1] = 'x';
 353
 354   for (Index = 0; Index < BinLength; Index++) {
 355     HexStr[Index * 2 + 2] = IScsiHexString[BinBuffer[Index] >> 4];
 356     HexStr[Index * 2 + 3] = IScsiHexString[BinBuffer[Index] & 0xf];
 357   }
 358
 359   HexStr[Index * 2 + 2] = '\0';
 360
 361   return EFI_SUCCESS;
 362 }
 363
 364
 365 /**
 366   Convert the hexadecimal string into a binary encoded buffer.
 367
 368   @param[in, out]  BinBuffer   The binary buffer.
 369   @param[in, out]  BinLength   Length of the binary buffer.
 370   @param[in]       HexStr      The hexadecimal string.
 371
 372   @retval EFI_SUCCESS          The hexadecimal string is converted into a binary
 373                                encoded buffer.
 374   @retval EFI_BUFFER_TOO_SMALL The binary buffer is too small to hold the converted data.
 375
 376 **/
 377 EFI_STATUS
 378 IScsiHexToBin (
 379   IN OUT UINT8  *BinBuffer,
 380   IN OUT UINT32 *BinLength,
 381   IN     CHAR8  *HexStr
 382   )
 383 {
 384   UINTN   Index;
 385   UINTN   Length;
 386   UINT8   Digit;
 387   CHAR8   TemStr[2];
 388
 389   ZeroMem (TemStr, sizeof (TemStr));
 390
 391   //
 392   // Find out how many hex characters the string has.
 393   //
 394   if ((HexStr[0] == '0') && ((HexStr[1] == 'x') || (HexStr[1] == 'X'))) {
 395     HexStr += 2;
 396   }
 397
 398   Length = AsciiStrLen (HexStr);
 399
 400   for (Index = 0; Index < Length; Index ++) {
 401     TemStr[0] = HexStr[Index];
 402     Digit = (UINT8) AsciiStrHexToUint64 (TemStr);
 403     if (Digit == 0 && TemStr[0] != '0') {
 404       //
 405       // Invalid Lun Char.
 406       //
 407       break;
 408     }
 409     if ((Index & 1) == 0) {
 410       BinBuffer [Index/2] = Digit;
 411     } else {
 412       BinBuffer [Index/2] = (UINT8) ((BinBuffer [Index/2] << 4) + Digit);
 413     }
 414   }
 415
 416   *BinLength = (UINT32) ((Index + 1)/2);
 417
 418   return EFI_SUCCESS;
 419 }
 420
 421
 422 /**
 423   Convert the decimal-constant string or hex-constant string into a numerical value.
 424
 425   @param[in] Str                    String in decimal or hex.
 426
 427   @return The numerical value.
 428
 429 **/
 430 UINTN
 431 IScsiNetNtoi (
 432   IN     CHAR8  *Str
 433   )
 434 {
 435   if ((Str[0] == '0') && ((Str[1] == 'x') || (Str[1] == 'X'))) {
 436     Str += 2;
 437
 438     return AsciiStrHexToUintn (Str);
 439   }
 440
 441   return AsciiStrDecimalToUintn (Str);
 442 }
 443
 444
 445 /**
 446   Generate random numbers.
 447
 448   @param[in, out]  Rand       The buffer to contain random numbers.
 449   @param[in]       RandLength The length of the Rand buffer.
 450
 451 **/
 452 VOID
 453 IScsiGenRandom (
 454   IN OUT UINT8  *Rand,
 455   IN     UINTN  RandLength
 456   )
 457 {
 458   UINT32  Random;
 459
 460   while (RandLength > 0) {
 461     Random  = NET_RANDOM (NetRandomInitSeed ());
 462     *Rand++ = (UINT8) (Random);
 463     RandLength--;
 464   }
 465 }
 466
 467
 468 /**
 469   Record the NIC info in global structure.
 470
 471   @param[in]  Controller         The handle of the controller.
 472
 473   @retval EFI_SUCCESS            The operation is completed.
 474   @retval EFI_OUT_OF_RESOURCES   Do not have sufficient resources to finish this
 475                                  operation.
 476
 477 **/
 478 EFI_STATUS
 479 IScsiAddNic (
 480   IN EFI_HANDLE  Controller
 481   )
 482 {
 483   EFI_STATUS                  Status;
 484   ISCSI_NIC_INFO              *NicInfo;
 485   LIST_ENTRY                  *Entry;
 486   EFI_MAC_ADDRESS             MacAddr;
 487   UINTN                       HwAddressSize;
 488   UINT16                      VlanId;
 489
 490   //
 491   // Get MAC address of this network device.
 492   //
 493   Status = NetLibGetMacAddress (Controller, &MacAddr, &HwAddressSize);
 494   if (EFI_ERROR (Status)) {
 495     return Status;
 496   }
 497
 498   //
 499   // Get VLAN ID of this network device.
 500   //
 501   VlanId = NetLibGetVlanId (Controller);
 502
 503   //
 504   // Check whether the NIC info already exists. Return directly if so.
 505   //
 506   NET_LIST_FOR_EACH (Entry, &mPrivate->NicInfoList) {
 507     NicInfo = NET_LIST_USER_STRUCT (Entry, ISCSI_NIC_INFO, Link);
 508     if (NicInfo->HwAddressSize == HwAddressSize &&
 509         CompareMem (&NicInfo->PermanentAddress, MacAddr.Addr, HwAddressSize) == 0 &&
 510         NicInfo->VlanId == VlanId) {
 511       mPrivate->CurrentNic = NicInfo->NicIndex;
 512       return EFI_SUCCESS;
 513     }
 514
 515     if (mPrivate->MaxNic < NicInfo->NicIndex) {
 516       mPrivate->MaxNic = NicInfo->NicIndex;
 517     }
 518   }
 519
 520   //
 521   // Record the NIC info in private structure.
 522   //
 523   NicInfo = AllocateZeroPool (sizeof (ISCSI_NIC_INFO));
 524   if (NicInfo == NULL) {
 525     return EFI_OUT_OF_RESOURCES;
 526   }
 527
 528   CopyMem (&NicInfo->PermanentAddress, MacAddr.Addr, HwAddressSize);
 529   NicInfo->HwAddressSize  = (UINT32) HwAddressSize;
 530   NicInfo->VlanId         = VlanId;
 531   NicInfo->NicIndex       = (UINT8) (mPrivate->MaxNic + 1);
 532   mPrivate->MaxNic        = NicInfo->NicIndex;
 533
 534   //
 535   // Get the PCI location.
 536   //
 537   IScsiGetNICPciLocation (
 538     Controller,
 539     &NicInfo->BusNumber,
 540     &NicInfo->DeviceNumber,
 541     &NicInfo->FunctionNumber
 542     );
 543
 544   InsertTailList (&mPrivate->NicInfoList, &NicInfo->Link);
 545   mPrivate->NicCount++;
 546
 547   mPrivate->CurrentNic = NicInfo->NicIndex;
 548   return EFI_SUCCESS;
 549 }
 550
 551
 552 /**
 553   Delete the recorded NIC info from global structure. Also delete corresponding
 554   attempts.
 555
 556   @param[in]  Controller         The handle of the controller.
 557
 558   @retval EFI_SUCCESS            The operation is completed.
 559   @retval EFI_NOT_FOUND          The NIC info to be deleted is not recorded.
 560
 561 **/
 562 EFI_STATUS
 563 IScsiRemoveNic (
 564   IN EFI_HANDLE  Controller
 565   )
 566 {
 567   EFI_STATUS                  Status;
 568   ISCSI_NIC_INFO              *NicInfo;
 569   LIST_ENTRY                  *Entry;
 570   LIST_ENTRY                  *NextEntry;
 571   ISCSI_ATTEMPT_CONFIG_NVDATA *AttemptConfigData;
 572   ISCSI_NIC_INFO              *ThisNic;
 573   EFI_MAC_ADDRESS             MacAddr;
 574   UINTN                       HwAddressSize;
 575   UINT16                      VlanId;
 576
 577   //
 578   // Get MAC address of this network device.
 579   //
 580   Status = NetLibGetMacAddress (Controller, &MacAddr, &HwAddressSize);
 581   if (EFI_ERROR (Status)) {
 582     return Status;
 583   }
 584
 585   //
 586   // Get VLAN ID of this network device.
 587   //
 588   VlanId = NetLibGetVlanId (Controller);
 589
 590   //
 591   // Check whether the NIC information exists.
 592   //
 593   ThisNic = NULL;
 594
 595   NET_LIST_FOR_EACH (Entry, &mPrivate->NicInfoList) {
 596     NicInfo = NET_LIST_USER_STRUCT (Entry, ISCSI_NIC_INFO, Link);
 597     if (NicInfo->HwAddressSize == HwAddressSize &&
 598         CompareMem (&NicInfo->PermanentAddress, MacAddr.Addr, HwAddressSize) == 0 &&
 599         NicInfo->VlanId == VlanId) {
 600
 601       ThisNic = NicInfo;
 602       break;
 603     }
 604   }
 605
 606   if (ThisNic == NULL) {
 607     return EFI_NOT_FOUND;
 608   }
 609
 610   mPrivate->CurrentNic = ThisNic->NicIndex;
 611
 612   RemoveEntryList (&ThisNic->Link);
 613   FreePool (ThisNic);
 614   mPrivate->NicCount--;
 615
 616   //
 617   // Remove all attempts related to this NIC.
 618   //
 619   NET_LIST_FOR_EACH_SAFE (Entry, NextEntry, &mPrivate->AttemptConfigs) {
 620     AttemptConfigData = NET_LIST_USER_STRUCT (Entry, ISCSI_ATTEMPT_CONFIG_NVDATA, Link);
 621     if (AttemptConfigData->NicIndex == mPrivate->CurrentNic) {
 622       RemoveEntryList (&AttemptConfigData->Link);
 623       mPrivate->AttemptCount--;
 624
 625       if (AttemptConfigData->SessionConfigData.Enabled == ISCSI_ENABLED_FOR_MPIO && mPrivate->MpioCount > 0) {
 626         if (--mPrivate->MpioCount == 0) {
 627           mPrivate->EnableMpio = FALSE;
 628         }
 629
 630         if (AttemptConfigData->AuthenticationType == ISCSI_AUTH_TYPE_KRB && mPrivate->Krb5MpioCount > 0) {
 631           mPrivate->Krb5MpioCount--;
 632         }
 633
 634       } else if (AttemptConfigData->SessionConfigData.Enabled == ISCSI_ENABLED && mPrivate->SinglePathCount > 0) {
 635         mPrivate->SinglePathCount--;
 636
 637         if (mPrivate->ValidSinglePathCount > 0) {
 638           mPrivate->ValidSinglePathCount--;
 639         }
 640       }
 641
 642       FreePool (AttemptConfigData);
 643     }
 644   }
 645
 646   //
 647   // Free attempt is created but not saved to system.
 648   //
 649   if (mPrivate->NewAttempt != NULL) {
 650     FreePool (mPrivate->NewAttempt);
 651     mPrivate->NewAttempt = NULL;
 652   }
 653
 654   return EFI_SUCCESS;
 655 }
 656
 657
 658 /**
 659   Get the recorded NIC info from global structure by the Index.
 660
 661   @param[in]  NicIndex          The index indicates the position of NIC info.
 662
 663   @return Pointer to the NIC info, or NULL if not found.
 664
 665 **/
 666 ISCSI_NIC_INFO *
 667 IScsiGetNicInfoByIndex (
 668   IN UINT8      NicIndex
 669   )
 670 {
 671   LIST_ENTRY        *Entry;
 672   ISCSI_NIC_INFO    *NicInfo;
 673
 674   NET_LIST_FOR_EACH (Entry, &mPrivate->NicInfoList) {
 675     NicInfo = NET_LIST_USER_STRUCT (Entry, ISCSI_NIC_INFO, Link);
 676     if (NicInfo->NicIndex == NicIndex) {
 677       return NicInfo;
 678     }
 679   }
 680
 681   return NULL;
 682 }
 683
 684
 685 /**
 686   Get the NIC's PCI location and return it accroding to the composited
 687   format defined in iSCSI Boot Firmware Table.
 688
 689   @param[in]   Controller        The handle of the controller.
 690   @param[out]  Bus               The bus number.
 691   @param[out]  Device            The device number.
 692   @param[out]  Function          The function number.
 693
 694   @return      The composited representation of the NIC PCI location.
 695
 696 **/
 697 UINT16
 698 IScsiGetNICPciLocation (
 699   IN EFI_HANDLE  Controller,
 700   OUT UINTN      *Bus,
 701   OUT UINTN      *Device,
 702   OUT UINTN      *Function
 703   )
 704 {
 705   EFI_STATUS                Status;
 706   EFI_DEVICE_PATH_PROTOCOL  *DevicePath;
 707   EFI_HANDLE                PciIoHandle;
 708   EFI_PCI_IO_PROTOCOL       *PciIo;
 709   UINTN                     Segment;
 710
 711   Status = gBS->HandleProtocol (
 712                   Controller,
 713                   &gEfiDevicePathProtocolGuid,
 714                   (VOID **) &DevicePath
 715                   );
 716   if (EFI_ERROR (Status)) {
 717     return 0;
 718   }
 719
 720   Status = gBS->LocateDevicePath (
 721                   &gEfiPciIoProtocolGuid,
 722                   &DevicePath,
 723                   &PciIoHandle
 724                   );
 725   if (EFI_ERROR (Status)) {
 726     return 0;
 727   }
 728
 729   Status = gBS->HandleProtocol (PciIoHandle, &gEfiPciIoProtocolGuid, (VOID **) &PciIo);
 730   if (EFI_ERROR (Status)) {
 731     return 0;
 732   }
 733
 734   Status = PciIo->GetLocation (PciIo, &Segment, Bus, Device, Function);
 735   if (EFI_ERROR (Status)) {
 736     return 0;
 737   }
 738
 739   return (UINT16) ((*Bus << 8) | (*Device << 3) | *Function);
 740 }
 741
 742
 743 /**
 744   Read the EFI variable (VendorGuid/Name) and return a dynamically allocated
 745   buffer, and the size of the buffer. If failure, return NULL.
 746
 747   @param[in]   Name                   String part of EFI variable name.
 748   @param[in]   VendorGuid             GUID part of EFI variable name.
 749   @param[out]  VariableSize           Returns the size of the EFI variable that was read.
 750
 751   @return Dynamically allocated memory that contains a copy of the EFI variable.
 752   @return Caller is responsible freeing the buffer.
 753   @retval NULL                   Variable was not read.
 754
 755 **/
 756 VOID *
 757 IScsiGetVariableAndSize (
 758   IN  CHAR16              *Name,
 759   IN  EFI_GUID            *VendorGuid,
 760   OUT UINTN               *VariableSize
 761   )
 762 {
 763   EFI_STATUS  Status;
 764   UINTN       BufferSize;
 765   VOID        *Buffer;
 766
 767   Buffer = NULL;
 768
 769   //
 770   // Pass in a zero size buffer to find the required buffer size.
 771   //
 772   BufferSize  = 0;
 773   Status      = gRT->GetVariable (Name, VendorGuid, NULL, &BufferSize, Buffer);
 774   if (Status == EFI_BUFFER_TOO_SMALL) {
 775     //
 776     // Allocate the buffer to return
 777     //
 778     Buffer = AllocateZeroPool (BufferSize);
 779     if (Buffer == NULL) {
 780       return NULL;
 781     }
 782     //
 783     // Read variable into the allocated buffer.
 784     //
 785     Status = gRT->GetVariable (Name, VendorGuid, NULL, &BufferSize, Buffer);
 786     if (EFI_ERROR (Status)) {
 787       BufferSize = 0;
 788     }
 789   }
 790
 791   *VariableSize = BufferSize;
 792   return Buffer;
 793 }
 794
 795
 796 /**
 797   Create the iSCSI driver data.
 798
 799   @param[in] Image      The handle of the driver image.
 800   @param[in] Controller The handle of the controller.
 801
 802   @return The iSCSI driver data created.
 803   @retval NULL Other errors as indicated.
 804
 805 **/
 806 ISCSI_DRIVER_DATA *
 807 IScsiCreateDriverData (
 808   IN EFI_HANDLE  Image,
 809   IN EFI_HANDLE  Controller
 810   )
 811 {
 812   ISCSI_DRIVER_DATA *Private;
 813   EFI_STATUS        Status;
 814
 815   Private = AllocateZeroPool (sizeof (ISCSI_DRIVER_DATA));
 816   if (Private == NULL) {
 817     return NULL;
 818   }
 819
 820   Private->Signature  = ISCSI_DRIVER_DATA_SIGNATURE;
 821   Private->Image      = Image;
 822   Private->Controller = Controller;
 823   Private->Session    = NULL;
 824
 825   //
 826   // Create an event to be signaled when the BS to RT transition is triggerd so
 827   // as to abort the iSCSI session.
 828   //
 829   Status = gBS->CreateEventEx (
 830                   EVT_NOTIFY_SIGNAL,
 831                   TPL_CALLBACK,
 832                   IScsiOnExitBootService,
 833                   Private,
 834                   &gEfiEventExitBootServicesGuid,
 835                   &Private->ExitBootServiceEvent
 836                   );
 837   if (EFI_ERROR (Status)) {
 838     FreePool (Private);
 839     return NULL;
 840   }
 841
 842   Private->ExtScsiPassThruHandle = NULL;
 843   CopyMem(&Private->IScsiExtScsiPassThru, &gIScsiExtScsiPassThruProtocolTemplate, sizeof(EFI_EXT_SCSI_PASS_THRU_PROTOCOL));
 844
 845   //
 846   // 0 is designated to the TargetId, so use another value for the AdapterId.
 847   //
 848   Private->ExtScsiPassThruMode.AdapterId  = 2;
 849   Private->ExtScsiPassThruMode.Attributes = EFI_EXT_SCSI_PASS_THRU_ATTRIBUTES_PHYSICAL | EFI_EXT_SCSI_PASS_THRU_ATTRIBUTES_LOGICAL;
 850   Private->ExtScsiPassThruMode.IoAlign    = 4;
 851   Private->IScsiExtScsiPassThru.Mode      = &Private->ExtScsiPassThruMode;
 852
 853   return Private;
 854 }
 855
 856
 857 /**
 858   Clean the iSCSI driver data.
 859
 860   @param[in]  Private The iSCSI driver data.
 861
 862 **/
 863 VOID
 864 IScsiCleanDriverData (
 865   IN ISCSI_DRIVER_DATA  *Private
 866   )
 867 {
 868   EFI_STATUS            Status;
 869
 870   if (Private->DevicePath != NULL) {
 871     gBS->UninstallProtocolInterface (
 872            Private->ExtScsiPassThruHandle,
 873            &gEfiDevicePathProtocolGuid,
 874            Private->DevicePath
 875            );
 876
 877     FreePool (Private->DevicePath);
 878   }
 879
 880   if (Private->ExtScsiPassThruHandle != NULL) {
 881     Status = gBS->UninstallProtocolInterface (
 882                     Private->ExtScsiPassThruHandle,
 883                     &gEfiExtScsiPassThruProtocolGuid,
 884                     &Private->IScsiExtScsiPassThru
 885                     );
 886     if (!EFI_ERROR (Status)) {
 887       mPrivate->OneSessionEstablished = FALSE;
 888     }
 889   }
 890
 891   gBS->CloseEvent (Private->ExitBootServiceEvent);
 892
 893   FreePool (Private);
 894 }
 895
 896 /**
 897   Check wheather the Controller handle is configured to use DHCP protocol.
 898
 899   @param[in]  Controller           The handle of the controller.
 900   @param[in]  IpVersion            IP_VERSION_4 or IP_VERSION_6.
 901
 902   @retval TRUE                     The handle of the controller need the Dhcp protocol.
 903   @retval FALSE                    The handle of the controller does not need the Dhcp protocol.
 904
 905 **/
 906 BOOLEAN
 907 IScsiDhcpIsConfigured (
 908   IN EFI_HANDLE  Controller,
 909   IN UINT8       IpVersion
 910   )
 911 {
 912   ISCSI_ATTEMPT_CONFIG_NVDATA *AttemptTmp;
 913   UINT8                       *AttemptConfigOrder;
 914   UINTN                       AttemptConfigOrderSize;
 915   UINTN                       Index;
 916   EFI_STATUS                  Status;
 917   EFI_MAC_ADDRESS             MacAddr;
 918   UINTN                       HwAddressSize;
 919   UINT16                      VlanId;
 920   CHAR16                      MacString[ISCSI_MAX_MAC_STRING_LEN];
 921   CHAR16                      AttemptName[ISCSI_NAME_IFR_MAX_SIZE];
 922
 923   AttemptConfigOrder = IScsiGetVariableAndSize (
 924                          L"AttemptOrder",
 925                          &gIScsiConfigGuid,
 926                          &AttemptConfigOrderSize
 927                          );
 928   if (AttemptConfigOrder == NULL || AttemptConfigOrderSize == 0) {
 929     return FALSE;
 930   }
 931
 932   //
 933   // Get MAC address of this network device.
 934   //
 935   Status = NetLibGetMacAddress (Controller, &MacAddr, &HwAddressSize);
 936   if(EFI_ERROR (Status)) {
 937     return FALSE;
 938   }
 939   //
 940   // Get VLAN ID of this network device.
 941   //
 942   VlanId = NetLibGetVlanId (Controller);
 943   IScsiMacAddrToStr (&MacAddr, (UINT32) HwAddressSize, VlanId, MacString);
 944
 945   for (Index = 0; Index < AttemptConfigOrderSize / sizeof (UINT8); Index++) {
 946     UnicodeSPrint (
 947       AttemptName,
 948       (UINTN) 128,
 949       L"%s%d",
 950       MacString,
 951       (UINTN) AttemptConfigOrder[Index]
 952       );
 953     Status = GetVariable2 (
 954                AttemptName,
 955                &gEfiIScsiInitiatorNameProtocolGuid,
 956                (VOID**)&AttemptTmp,
 957                NULL
 958                );
 959     if(AttemptTmp == NULL || EFI_ERROR (Status)) {
 960       continue;
 961     }
 962
 963     ASSERT (AttemptConfigOrder[Index] == AttemptTmp->AttemptConfigIndex);
 964
 965     if (AttemptTmp->SessionConfigData.Enabled == ISCSI_DISABLED) {
 966       FreePool (AttemptTmp);
 967       continue;
 968     }
 969
 970     if (AttemptTmp->SessionConfigData.IpMode != IP_MODE_AUTOCONFIG &&
 971         AttemptTmp->SessionConfigData.IpMode != ((IpVersion == IP_VERSION_4) ? IP_MODE_IP4 : IP_MODE_IP6)) {
 972       FreePool (AttemptTmp);
 973       continue;
 974     }
 975
 976     if(AttemptTmp->SessionConfigData.IpMode == IP_MODE_AUTOCONFIG ||
 977        AttemptTmp->SessionConfigData.InitiatorInfoFromDhcp == TRUE ||
 978        AttemptTmp->SessionConfigData.TargetInfoFromDhcp == TRUE) {
 979       FreePool (AttemptTmp);
 980       FreePool (AttemptConfigOrder);
 981       return TRUE;
 982     }
 983
 984     FreePool (AttemptTmp);
 985   }
 986
 987   FreePool (AttemptConfigOrder);
 988   return FALSE;
 989 }
 990
 991 /**
 992   Get the various configuration data.
 993
 994   @param[in]  Private   The iSCSI driver data.
 995
 996   @retval EFI_SUCCESS            The configuration data is retrieved.
 997   @retval EFI_NOT_FOUND          This iSCSI driver is not configured yet.
 998
 999 **/
1000 EFI_STATUS
1001 IScsiGetConfigData (
1002   IN ISCSI_DRIVER_DATA  *Private
1003   )
1004 {
1005   EFI_STATUS                  Status;
1006   CHAR16                      MacString[ISCSI_MAX_MAC_STRING_LEN];
1007   UINTN                       Index;
1008   ISCSI_NIC_INFO              *NicInfo;
1009   ISCSI_ATTEMPT_CONFIG_NVDATA *AttemptConfigData;
1010   ISCSI_ATTEMPT_CONFIG_NVDATA *AttemptTmp;
1011   UINT8                       *AttemptConfigOrder;
1012   UINTN                       AttemptConfigOrderSize;
1013   CHAR16                      IScsiMode[64];
1014   CHAR16                      IpMode[64];
1015
1016   //
1017   // There should be at least one attempt configured.
1018   //
1019   AttemptConfigOrder = IScsiGetVariableAndSize (
1020                          L"AttemptOrder",
1021                          &gIScsiConfigGuid,
1022                          &AttemptConfigOrderSize
1023                          );
1024   if (AttemptConfigOrder == NULL || AttemptConfigOrderSize == 0) {
1025     return EFI_NOT_FOUND;
1026   }
1027
1028   //
1029   // Get the iSCSI Initiator Name.
1030   //
1031   mPrivate->InitiatorNameLength  = ISCSI_NAME_MAX_SIZE;
1032   Status = gIScsiInitiatorName.Get (
1033                                  &gIScsiInitiatorName,
1034                                  &mPrivate->InitiatorNameLength,
1035                                  mPrivate->InitiatorName
1036                                  );
1037   if (EFI_ERROR (Status)) {
1038     return Status;
1039   }
1040
1041   //
1042   // Get the normal configuration.
1043   //
1044   for (Index = 0; Index < AttemptConfigOrderSize / sizeof (UINT8); Index++) {
1045
1046     //
1047     // Check whether the attempt exists in AttemptConfig.
1048     //
1049     AttemptTmp = IScsiConfigGetAttemptByConfigIndex (AttemptConfigOrder[Index]);
1050     if (AttemptTmp != NULL && AttemptTmp->SessionConfigData.Enabled == ISCSI_DISABLED) {
1051       continue;
1052     } else if (AttemptTmp != NULL && AttemptTmp->SessionConfigData.Enabled != ISCSI_DISABLED) {
1053       //
1054       // Check the autoconfig path to see whether it should be retried.
1055       //
1056       if (AttemptTmp->SessionConfigData.IpMode == IP_MODE_AUTOCONFIG &&
1057           AttemptTmp->AutoConfigureMode != IP_MODE_AUTOCONFIG_SUCCESS) {
1058         if (mPrivate->Ipv6Flag &&
1059             AttemptTmp->AutoConfigureMode == IP_MODE_AUTOCONFIG_IP6) {
1060           //
1061           // Autoconfigure for IP6 already attempted but failed. Do not try again.
1062           //
1063           continue;
1064         } else if (!mPrivate->Ipv6Flag &&
1065                    AttemptTmp->AutoConfigureMode == IP_MODE_AUTOCONFIG_IP4) {
1066           //
1067           // Autoconfigure for IP4  already attempted but failed. Do not try again.
1068           //
1069           continue;
1070         } else {
1071           //
1072           // Try another approach for this autoconfigure path.
1073           //
1074           AttemptTmp->AutoConfigureMode =
1075             (UINT8) (mPrivate->Ipv6Flag ? IP_MODE_AUTOCONFIG_IP6 : IP_MODE_AUTOCONFIG_IP4);
1076           AttemptTmp->SessionConfigData.InitiatorInfoFromDhcp = TRUE;
1077           AttemptTmp->SessionConfigData.TargetInfoFromDhcp    = TRUE;
1078           AttemptTmp->DhcpSuccess                             = FALSE;
1079
1080           //
1081           // Get some information from the dhcp server.
1082           //
1083           if (!mPrivate->Ipv6Flag) {
1084             Status = IScsiDoDhcp (Private->Image, Private->Controller, AttemptTmp);
1085             if (!EFI_ERROR (Status)) {
1086               AttemptTmp->DhcpSuccess = TRUE;
1087             }
1088           } else {
1089             Status = IScsiDoDhcp6 (Private->Image, Private->Controller, AttemptTmp);
1090             if (!EFI_ERROR (Status)) {
1091               AttemptTmp->DhcpSuccess = TRUE;
1092             }
1093           }
1094
1095           //
1096           // Refresh the state of this attempt to NVR.
1097           //
1098           AsciiStrToUnicodeStr (AttemptTmp->MacString, MacString);
1099           UnicodeSPrint (
1100             mPrivate->PortString,
1101             (UINTN) ISCSI_NAME_IFR_MAX_SIZE,
1102             L"%s%d",
1103             MacString,
1104             (UINTN) AttemptTmp->AttemptConfigIndex
1105             );
1106
1107           gRT->SetVariable (
1108                  mPrivate->PortString,
1109                  &gEfiIScsiInitiatorNameProtocolGuid,
1110                  ISCSI_CONFIG_VAR_ATTR,
1111                  sizeof (ISCSI_ATTEMPT_CONFIG_NVDATA),
1112                  AttemptTmp
1113                  );
1114
1115           continue;
1116         }
1117       } else if (AttemptTmp->SessionConfigData.InitiatorInfoFromDhcp && !AttemptTmp->ValidPath) {
1118         //
1119         // Get DHCP information for already added, but failed, attempt.
1120         //
1121         AttemptTmp->DhcpSuccess = FALSE;
1122         if (!mPrivate->Ipv6Flag && (AttemptTmp->SessionConfigData.IpMode == IP_MODE_IP4)) {
1123           Status = IScsiDoDhcp (Private->Image, Private->Controller, AttemptTmp);
1124           if (!EFI_ERROR (Status)) {
1125             AttemptTmp->DhcpSuccess = TRUE;
1126           }
1127         } else if (mPrivate->Ipv6Flag && (AttemptTmp->SessionConfigData.IpMode == IP_MODE_IP6)) {
1128           Status = IScsiDoDhcp6 (Private->Image, Private->Controller, AttemptTmp);
1129           if (!EFI_ERROR (Status)) {
1130             AttemptTmp->DhcpSuccess = TRUE;
1131           }
1132         }
1133
1134         //
1135         // Refresh the state of this attempt to NVR.
1136         //
1137         AsciiStrToUnicodeStr (AttemptTmp->MacString, MacString);
1138         UnicodeSPrint (
1139           mPrivate->PortString,
1140           (UINTN) ISCSI_NAME_IFR_MAX_SIZE,
1141           L"%s%d",
1142           MacString,
1143           (UINTN) AttemptTmp->AttemptConfigIndex
1144           );
1145
1146         gRT->SetVariable (
1147                mPrivate->PortString,
1148                &gEfiIScsiInitiatorNameProtocolGuid,
1149                ISCSI_CONFIG_VAR_ATTR,
1150                sizeof (ISCSI_ATTEMPT_CONFIG_NVDATA),
1151                AttemptTmp
1152                );
1153
1154         continue;
1155
1156       } else {
1157         continue;
1158       }
1159     }
1160
1161     //
1162     // This attempt does not exist in AttemptConfig. Try to add a new one.
1163     //
1164
1165     NicInfo = IScsiGetNicInfoByIndex (mPrivate->CurrentNic);
1166     ASSERT (NicInfo != NULL);
1167     IScsiMacAddrToStr (&NicInfo->PermanentAddress, NicInfo->HwAddressSize, NicInfo->VlanId, MacString);
1168     UnicodeSPrint (
1169       mPrivate->PortString,
1170       (UINTN) 128,
1171       L"%s%d",
1172       MacString,
1173       (UINTN) AttemptConfigOrder[Index]
1174       );
1175
1176     GetVariable2 (
1177                  mPrivate->PortString,
1178                  &gEfiIScsiInitiatorNameProtocolGuid,
1179                  (VOID**)&AttemptConfigData,
1180                  NULL
1181                  );
1182
1183     if (AttemptConfigData == NULL) {
1184       continue;
1185     }
1186
1187     ASSERT (AttemptConfigOrder[Index] == AttemptConfigData->AttemptConfigIndex);
1188
1189     AttemptConfigData->NicIndex      = NicInfo->NicIndex;
1190     AttemptConfigData->DhcpSuccess   = FALSE;
1191     AttemptConfigData->ValidiBFTPath = (BOOLEAN) (mPrivate->EnableMpio ? TRUE : FALSE);
1192     AttemptConfigData->ValidPath     = FALSE;
1193
1194     if (AttemptConfigData->SessionConfigData.IpMode == IP_MODE_AUTOCONFIG) {
1195       AttemptConfigData->SessionConfigData.InitiatorInfoFromDhcp = TRUE;
1196       AttemptConfigData->SessionConfigData.TargetInfoFromDhcp    = TRUE;
1197
1198       AttemptConfigData->AutoConfigureMode =
1199         (UINT8) (mPrivate->Ipv6Flag ? IP_MODE_AUTOCONFIG_IP6 : IP_MODE_AUTOCONFIG_IP4);
1200     }
1201
1202     //
1203     // Get some information from dhcp server.
1204     //
1205     if (AttemptConfigData->SessionConfigData.Enabled != ISCSI_DISABLED &&
1206         AttemptConfigData->SessionConfigData.InitiatorInfoFromDhcp) {
1207
1208       if (!mPrivate->Ipv6Flag &&
1209           (AttemptConfigData->SessionConfigData.IpMode == IP_MODE_IP4 ||
1210            AttemptConfigData->AutoConfigureMode == IP_MODE_AUTOCONFIG_IP4)) {
1211         Status = IScsiDoDhcp (Private->Image, Private->Controller, AttemptConfigData);
1212         if (!EFI_ERROR (Status)) {
1213           AttemptConfigData->DhcpSuccess = TRUE;
1214         }
1215       } else if (mPrivate->Ipv6Flag &&
1216                 (AttemptConfigData->SessionConfigData.IpMode == IP_MODE_IP6 ||
1217                  AttemptConfigData->AutoConfigureMode == IP_MODE_AUTOCONFIG_IP6)) {
1218         Status = IScsiDoDhcp6 (Private->Image, Private->Controller, AttemptConfigData);
1219         if (!EFI_ERROR (Status)) {
1220           AttemptConfigData->DhcpSuccess = TRUE;
1221         }
1222       }
1223
1224       //
1225       // Refresh the state of this attempt to NVR.
1226       //
1227       AsciiStrToUnicodeStr (AttemptConfigData->MacString, MacString);
1228       UnicodeSPrint (
1229         mPrivate->PortString,
1230         (UINTN) ISCSI_NAME_IFR_MAX_SIZE,
1231         L"%s%d",
1232         MacString,
1233         (UINTN) AttemptConfigData->AttemptConfigIndex
1234         );
1235
1236       gRT->SetVariable (
1237              mPrivate->PortString,
1238              &gEfiIScsiInitiatorNameProtocolGuid,
1239              ISCSI_CONFIG_VAR_ATTR,
1240              sizeof (ISCSI_ATTEMPT_CONFIG_NVDATA),
1241              AttemptConfigData
1242              );
1243     }
1244
1245     //
1246     // Update Attempt Help Info.
1247     //
1248
1249     if (AttemptConfigData->SessionConfigData.Enabled == ISCSI_DISABLED) {
1250       UnicodeSPrint (IScsiMode, 64, L"Disabled");
1251     } else if (AttemptConfigData->SessionConfigData.Enabled == ISCSI_ENABLED) {
1252       UnicodeSPrint (IScsiMode, 64, L"Enabled");
1253     } else if (AttemptConfigData->SessionConfigData.Enabled == ISCSI_ENABLED_FOR_MPIO) {
1254       UnicodeSPrint (IScsiMode, 64, L"Enabled for MPIO");
1255     }
1256
1257     if (AttemptConfigData->SessionConfigData.IpMode == IP_MODE_IP4) {
1258       UnicodeSPrint (IpMode, 64, L"IP4");
1259     } else if (AttemptConfigData->SessionConfigData.IpMode == IP_MODE_IP6) {
1260       UnicodeSPrint (IpMode, 64, L"IP6");
1261     } else if (AttemptConfigData->SessionConfigData.IpMode == IP_MODE_AUTOCONFIG) {
1262       UnicodeSPrint (IpMode, 64, L"Autoconfigure");
1263     }
1264
1265     UnicodeSPrint (
1266       mPrivate->PortString,
1267       (UINTN) ISCSI_NAME_IFR_MAX_SIZE,
1268       L"MAC: %s, PFA: Bus %d | Dev %d | Func %d, iSCSI mode: %s, IP version: %s",
1269       MacString,
1270       NicInfo->BusNumber,
1271       NicInfo->DeviceNumber,
1272       NicInfo->FunctionNumber,
1273       IScsiMode,
1274       IpMode
1275       );
1276
1277     AttemptConfigData->AttemptTitleHelpToken = HiiSetString (
1278                                                  mCallbackInfo->RegisteredHandle,
1279                                                  0,
1280                                                  mPrivate->PortString,
1281                                                  NULL
1282                                                  );
1283     ASSERT (AttemptConfigData->AttemptTitleHelpToken != 0);
1284
1285     //
1286     // Record the attempt in global link list.
1287     //
1288     InsertTailList (&mPrivate->AttemptConfigs, &AttemptConfigData->Link);
1289     mPrivate->AttemptCount++;
1290
1291     if (AttemptConfigData->SessionConfigData.Enabled == ISCSI_ENABLED_FOR_MPIO) {
1292       mPrivate->MpioCount++;
1293       mPrivate->EnableMpio = TRUE;
1294
1295       if (AttemptConfigData->AuthenticationType == ISCSI_AUTH_TYPE_KRB) {
1296         mPrivate->Krb5MpioCount++;
1297       }
1298     } else if (AttemptConfigData->SessionConfigData.Enabled == ISCSI_ENABLED) {
1299       mPrivate->SinglePathCount++;
1300     }
1301   }
1302
1303   //
1304   // Reorder the AttemptConfig by the configured order.
1305   //
1306   for (Index = 0; Index < AttemptConfigOrderSize / sizeof (UINT8); Index++) {
1307     AttemptConfigData = IScsiConfigGetAttemptByConfigIndex (AttemptConfigOrder[Index]);
1308     if (AttemptConfigData == NULL) {
1309       continue;
1310     }
1311
1312     RemoveEntryList (&AttemptConfigData->Link);
1313     InsertTailList (&mPrivate->AttemptConfigs, &AttemptConfigData->Link);
1314   }
1315
1316   //
1317   // Update the Main Form.
1318   //
1319   IScsiConfigUpdateAttempt ();
1320
1321   FreePool (AttemptConfigOrder);
1322
1323   //
1324   //  There should be at least one attempt configuration.
1325   //
1326   if (!mPrivate->EnableMpio) {
1327     if (mPrivate->SinglePathCount == 0) {
1328       return EFI_NOT_FOUND;
1329     }
1330     mPrivate->ValidSinglePathCount = mPrivate->SinglePathCount;
1331   }
1332
1333   return EFI_SUCCESS;
1334 }
1335
1336
1337 /**
1338   Get the device path of the iSCSI tcp connection and update it.
1339
1340   @param  Session                The iSCSI session.
1341
1342   @return The updated device path.
1343   @retval NULL Other errors as indicated.
1344
1345 **/
1346 EFI_DEVICE_PATH_PROTOCOL *
1347 IScsiGetTcpConnDevicePath (
1348   IN ISCSI_SESSION      *Session
1349   )
1350 {
1351   ISCSI_CONNECTION          *Conn;
1352   EFI_DEVICE_PATH_PROTOCOL  *DevicePath;
1353   EFI_STATUS                Status;
1354   EFI_DEV_PATH              *DPathNode;
1355
1356   if (Session->State != SESSION_STATE_LOGGED_IN) {
1357     return NULL;
1358   }
1359
1360   Conn = NET_LIST_USER_STRUCT_S (
1361            Session->Conns.ForwardLink,
1362            ISCSI_CONNECTION,
1363            Link,
1364            ISCSI_CONNECTION_SIGNATURE
1365            );
1366
1367   Status = gBS->HandleProtocol (
1368                   Conn->TcpIo.Handle,
1369                   &gEfiDevicePathProtocolGuid,
1370                   (VOID **) &DevicePath
1371                   );
1372   if (EFI_ERROR (Status)) {
1373     return NULL;
1374   }
1375   //
1376   // Duplicate it.
1377   //
1378   DevicePath  = DuplicateDevicePath (DevicePath);
1379   if (DevicePath == NULL) {
1380     return NULL;
1381   }
1382
1383   DPathNode   = (EFI_DEV_PATH *) DevicePath;
1384
1385   while (!IsDevicePathEnd (&DPathNode->DevPath)) {
1386     if (DevicePathType (&DPathNode->DevPath) == MESSAGING_DEVICE_PATH) {
1387       if (!Conn->Ipv6Flag && DevicePathSubType (&DPathNode->DevPath) == MSG_IPv4_DP) {
1388         DPathNode->Ipv4.LocalPort       = 0;
1389
1390         DPathNode->Ipv4.StaticIpAddress =
1391           (BOOLEAN) (!Session->ConfigData->SessionConfigData.InitiatorInfoFromDhcp);
1392
1393         IP4_COPY_ADDRESS (
1394           &DPathNode->Ipv4.GatewayIpAddress,
1395           &Session->ConfigData->SessionConfigData.Gateway
1396           );
1397
1398         IP4_COPY_ADDRESS (
1399           &DPathNode->Ipv4.SubnetMask,
1400           &Session->ConfigData->SessionConfigData.SubnetMask
1401           );
1402         break;
1403       } else if (Conn->Ipv6Flag && DevicePathSubType (&DPathNode->DevPath) == MSG_IPv6_DP) {
1404         DPathNode->Ipv6.LocalPort       = 0;
1405         DPathNode->Ipv6.IpAddressOrigin = 0;
1406         DPathNode->Ipv6.PrefixLength    = IP6_PREFIX_LENGTH;
1407         ZeroMem (&DPathNode->Ipv6.GatewayIpAddress, sizeof (EFI_IPv6_ADDRESS));
1408         break;
1409       }
1410     }
1411
1412     DPathNode = (EFI_DEV_PATH *) NextDevicePathNode (&DPathNode->DevPath);
1413   }
1414
1415   return DevicePath;
1416 }
1417
1418
1419 /**
1420   Abort the session when the transition from BS to RT is initiated.
1421
1422   @param[in]   Event  The event signaled.
1423   @param[in]  Context The iSCSI driver data.
1424
1425 **/
1426 VOID
1427 EFIAPI
1428 IScsiOnExitBootService (
1429   IN EFI_EVENT  Event,
1430   IN VOID       *Context
1431   )
1432 {
1433   ISCSI_DRIVER_DATA *Private;
1434
1435   Private = (ISCSI_DRIVER_DATA *) Context;
1436   gBS->CloseEvent (Private->ExitBootServiceEvent);
1437
1438   if (Private->Session != NULL) {
1439     IScsiSessionAbort (Private->Session);
1440   }
1441 }
1442
1443 /**
1444   Tests whether a controller handle is being managed by IScsi driver.
1445
1446   This function tests whether the driver specified by DriverBindingHandle is
1447   currently managing the controller specified by ControllerHandle.  This test
1448   is performed by evaluating if the the protocol specified by ProtocolGuid is
1449   present on ControllerHandle and is was opened by DriverBindingHandle and Nic
1450   Device handle with an attribute of EFI_OPEN_PROTOCOL_BY_DRIVER.
1451   If ProtocolGuid is NULL, then ASSERT().
1452
1453   @param  ControllerHandle     A handle for a controller to test.
1454   @param  DriverBindingHandle  Specifies the driver binding handle for the
1455                                driver.
1456   @param  ProtocolGuid         Specifies the protocol that the driver specified
1457                                by DriverBindingHandle opens in its Start()
1458                                function.
1459
1460   @retval EFI_SUCCESS          ControllerHandle is managed by the driver
1461                                specified by DriverBindingHandle.
1462   @retval EFI_UNSUPPORTED      ControllerHandle is not managed by the driver
1463                                specified by DriverBindingHandle.
1464
1465 **/
1466 EFI_STATUS
1467 EFIAPI
1468 IScsiTestManagedDevice (
1469   IN  EFI_HANDLE       ControllerHandle,
1470   IN  EFI_HANDLE       DriverBindingHandle,
1471   IN  EFI_GUID         *ProtocolGuid
1472   )
1473 {
1474   EFI_STATUS     Status;
1475   VOID           *ManagedInterface;
1476   EFI_HANDLE     NicControllerHandle;
1477
1478   ASSERT (ProtocolGuid != NULL);
1479
1480   NicControllerHandle = NetLibGetNicHandle (ControllerHandle, ProtocolGuid);
1481   if (NicControllerHandle == NULL) {
1482     return EFI_UNSUPPORTED;
1483   }
1484
1485   Status = gBS->OpenProtocol (
1486                   ControllerHandle,
1487                   (EFI_GUID *) ProtocolGuid,
1488                   &ManagedInterface,
1489                   DriverBindingHandle,
1490                   NicControllerHandle,
1491                   EFI_OPEN_PROTOCOL_BY_DRIVER
1492                   );
1493   if (!EFI_ERROR (Status)) {
1494     gBS->CloseProtocol (
1495            ControllerHandle,
1496            (EFI_GUID *) ProtocolGuid,
1497            DriverBindingHandle,
1498            NicControllerHandle
1499            );
1500     return EFI_UNSUPPORTED;
1501   }
1502
1503   if (Status != EFI_ALREADY_STARTED) {
1504     return EFI_UNSUPPORTED;
1505   }
1506
1507   return EFI_SUCCESS;
1508 }