OvmfPkg/OvmfPkg.fdf

   1 #/** @file
   2 #  Open Virtual Machine Firmware: FDF
   3 #
   4 #  Copyright (c) 2006 - 2009, Intel Corporation
   5 #
   6 #  All rights reserved. This program and the accompanying materials
   7 #  are licensed and made available under the terms and conditions of the BSD License
   8 #  which accompanies this distribution. The full text of the license may be found at
   9 #  http://opensource.org/licenses/bsd-license.php
  10 #
  11 #  THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
  12 #  WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
  13 #
  14 #**/
  15
  16 ################################################################################
  17 #
  18 # FD Section
  19 # The [FD] Section is made up of the definition statements and a
  20 # description of what goes into  the Flash Device Image.  Each FD section
  21 # defines one flash "device" image.  A flash device image may be one of
  22 # the following: Removable media bootable image (like a boot floppy
  23 # image,) an Option ROM image (that would be "flashed" into an add-in
  24 # card,) a System "Flash"  image (that would be burned into a system's
  25 # flash) or an Update ("Capsule") image that will be used to update and
  26 # existing system flash.
  27 #
  28 ################################################################################
  29 [FD.OVMF]
  30 BaseAddress   = 0xFFE00000     # The base address of the FLASH Device.
  31 Size          = 0x00200000     # The size in bytes of the FLASH Device
  32 ErasePolarity = 1
  33 BlockSize     = 0x10000
  34 NumBlocks     = 0x20
  35
  36 ################################################################################
  37 #
  38 # Following are lists of FD Region layout which correspond to the locations of different
  39 # images within the flash device.
  40 #
  41 # Regions must be defined in ascending order and may not overlap.
  42 #
  43 # A Layout Region start with a eight digit hex offset (leading "0x" required) followed by
  44 # the pipe "|" character, followed by the size of the region, also in hex with the leading
  45 # "0x" characters. Like:
  46 # Offset|Size
  47 # PcdOffsetCName|PcdSizeCName
  48 # RegionType <FV, DATA, or FILE>
  49 #
  50 ################################################################################
  51 0x0|0x200000
  52 gEfiUnixPkgTokenSpaceGuid.PcdUnixFlashFvRecoveryBase|gEfiUnixPkgTokenSpaceGuid.PcdUnixFlashFvRecoverySize
  53 FV = MAINFV
  54
  55 ################################################################################
  56 #
  57 # FV Section
  58 #
  59 # [FV] section is used to define what components or modules are placed within a flash
  60 # device file.  This section also defines order the components and modules are positioned
  61 # within the image.  The [FV] section consists of define statements, set statements and
  62 # module statements.
  63 #
  64 ################################################################################
  65 [FV.DXEFV]
  66 BlockSize          = 0x1000
  67 FvAlignment        = 16         #FV alignment and FV attributes setting.
  68 ERASE_POLARITY     = 1
  69 MEMORY_MAPPED      = TRUE
  70 STICKY_WRITE       = TRUE
  71 LOCK_CAP           = TRUE
  72 LOCK_STATUS        = TRUE
  73 WRITE_DISABLED_CAP = TRUE
  74 WRITE_ENABLED_CAP  = TRUE
  75 WRITE_STATUS       = TRUE
  76 WRITE_LOCK_CAP     = TRUE
  77 WRITE_LOCK_STATUS  = TRUE
  78 READ_DISABLED_CAP  = TRUE
  79 READ_ENABLED_CAP   = TRUE
  80 READ_STATUS        = TRUE
  81 READ_LOCK_CAP      = TRUE
  82 READ_LOCK_STATUS   = TRUE
  83
  84 #
  85 # Files to be placed in DXEFV
  86 #
  87 # This firmware volume will have files placed in it uncompressed,
  88 # and then then entire firmware volume will be compressed in a
  89 # single compression operation in order to achieve better
  90 # overall compression.
  91 #
  92
  93 APRIORI DXE {
  94   INF  MdeModulePkg/Universal/PCD/Dxe/Pcd.inf
  95   INF  IntelFrameworkModulePkg/Universal/DataHubDxe/DataHubDxe.inf
  96 }
  97
  98 #
  99 # DXE Phase modules
 100 #
 101 INF  MdeModulePkg/Core/Dxe/DxeMain.inf
 102
 103 INF  IntelFrameworkModulePkg/Universal/StatusCode/RuntimeDxe/StatusCodeRuntimeDxe.inf
 104 INF  MdeModulePkg/Universal/PCD/Dxe/Pcd.inf
 105
 106 INF  MdeModulePkg/Core/RuntimeDxe/RuntimeDxe.inf
 107 INF  MdeModulePkg/Universal/SecurityStubDxe/SecurityStubDxe.inf
 108 INF  IntelFrameworkModulePkg/Universal/DataHubDxe/DataHubDxe.inf
 109 INF  MdeModulePkg/Universal/EbcDxe/EbcDxe.inf
 110 INF  MdeModulePkg/Universal/SmbiosDxe/SmbiosDxe.inf
 111 INF  PcAtChipsetPkg/8259InterruptControllerDxe/8259.inf
 112 INF  UefiCpuPkg/CpuIo2Dxe/CpuIo2Dxe.inf
 113 INF  UefiCpuPkg/CpuDxe/CpuDxe.inf
 114 INF  PcAtChipsetPkg/8254TimerDxe/8254Timer.inf
 115 INF  PcAtChipsetPkg/PciHostBridgeDxe/PciHostBridgeDxe.inf
 116 INF  MdeModulePkg/Bus/Pci/PciBusDxe/PciBusDxe.inf
 117 INF  PcAtChipsetPkg/KbcResetDxe/Reset.inf
 118 INF  MdeModulePkg/Universal/Metronome/Metronome.inf
 119 INF  PcAtChipsetPkg/PcatRealTimeClockRuntimeDxe/PcatRealTimeClockRuntimeDxe.inf
 120
 121 INF  OvmfPkg/EmuVariableFvbRuntimeDxe/Fvb.inf
 122 INF  MdeModulePkg/Universal/FaultTolerantWriteDxe/FaultTolerantWriteDxe.inf
 123 INF  MdeModulePkg/Universal/Variable/RuntimeDxe/VariableRuntimeDxe.inf
 124 INF  MdeModulePkg/Universal/WatchdogTimerDxe/WatchdogTimer.inf
 125 INF  MdeModulePkg/Universal/MonotonicCounterRuntimeDxe/MonotonicCounterRuntimeDxe.inf
 126 INF  MdeModulePkg/Universal/CapsuleRuntimeDxe/CapsuleRuntimeDxe.inf
 127 INF  MdeModulePkg/Universal/Console/ConPlatformDxe/ConPlatformDxe.inf
 128 INF  MdeModulePkg/Universal/Console/ConSplitterDxe/ConSplitterDxe.inf
 129 INF  MdeModulePkg/Universal/Console/GraphicsConsoleDxe/GraphicsConsoleDxe.inf
 130 INF  MdeModulePkg/Universal/Console/TerminalDxe/TerminalDxe.inf
 131 INF  IntelFrameworkModulePkg/Universal/BdsDxe/BdsDxe.inf
 132 INF  MdeModulePkg/Universal/DevicePathDxe/DevicePathDxe.inf
 133 INF  MdeModulePkg/Universal/PrintDxe/PrintDxe.inf
 134 INF  MdeModulePkg/Universal/Disk/DiskIoDxe/DiskIoDxe.inf
 135 INF  MdeModulePkg/Universal/Disk/PartitionDxe/PartitionDxe.inf
 136 INF  MdeModulePkg/Universal/Disk/UnicodeCollation/EnglishDxe/EnglishDxe.inf
 137 INF  MdeModulePkg/Bus/Scsi/ScsiBusDxe/ScsiBusDxe.inf
 138 INF  MdeModulePkg/Bus/Scsi/ScsiDiskDxe/ScsiDiskDxe.inf
 139 INF  IntelFrameworkModulePkg/Bus/Pci/IdeBusDxe/IdeBusDxe.inf
 140 INF  PcAtChipsetPkg/Bus/Pci/IdeControllerDxe/IdeControllerDxe.inf
 141 INF  MdeModulePkg/Universal/HiiDatabaseDxe/HiiDatabaseDxe.inf
 142 INF  MdeModulePkg/Universal/SetupBrowserDxe/SetupBrowserDxe.inf
 143
 144 INF  PcAtChipsetPkg/IsaAcpiDxe/IsaAcpi.inf
 145 INF  IntelFrameworkModulePkg/Bus/Isa/IsaBusDxe/IsaBusDxe.inf
 146 INF  IntelFrameworkModulePkg/Bus/Isa/IsaSerialDxe/IsaSerialDxe.inf
 147 INF  IntelFrameworkModulePkg/Bus/Isa/Ps2KeyboardDxe/Ps2keyboardDxe.inf
 148 INF  IntelFrameworkModulePkg/Bus/Isa/IsaFloppyDxe/IsaFloppyDxe.inf
 149
 150 INF  MdeModulePkg/Universal/Acpi/AcpiTableDxe/AcpiTableDxe.inf
 151 INF  MdeModulePkg/Universal/Acpi/AcpiPlatformDxe/AcpiPlatformDxe.inf
 152 INF  RuleOverride=ACPITABLE OvmfPkg/AcpiTables/AcpiTables.inf
 153
 154 INF  FatBinPkg/EnhancedFatDxe/Fat.inf
 155
 156 INF  EdkShellBinPkg/FullShell/FullShell.inf
 157
 158 FILE FREEFORM = PCD(gEfiIntelFrameworkModulePkgTokenSpaceGuid.PcdLogoFile) {
 159     SECTION GUIDED EE4E5898-3914-4259-9D6E-DC7BD79403CF PROCESSING_REQUIRED = TRUE { # LzmaCompress
 160       SECTION RAW = MdeModulePkg/Logo/Logo.bmp
 161     }
 162   }
 163
 164 ################################################################################
 165
 166 [FV.MAINFV]
 167 FvAlignment        = 16
 168 ERASE_POLARITY     = 1
 169 MEMORY_MAPPED      = TRUE
 170 STICKY_WRITE       = TRUE
 171 LOCK_CAP           = TRUE
 172 LOCK_STATUS        = TRUE
 173 WRITE_DISABLED_CAP = TRUE
 174 WRITE_ENABLED_CAP  = TRUE
 175 WRITE_STATUS       = TRUE
 176 WRITE_LOCK_CAP     = TRUE
 177 WRITE_LOCK_STATUS  = TRUE
 178 READ_DISABLED_CAP  = TRUE
 179 READ_ENABLED_CAP   = TRUE
 180 READ_STATUS        = TRUE
 181 READ_LOCK_CAP      = TRUE
 182 READ_LOCK_STATUS   = TRUE
 183
 184 #
 185 # Files to be placed in MAINFV
 186 #
 187 # This firmware volume will have all the files placed in it which
 188 # must not be compressed at the initial boot phase.  The only
 189 # exception to this is the compressed 'DXEFV'.
 190 #
 191
 192 APRIORI PEI {
 193   INF  MdeModulePkg/Universal/PCD/Pei/Pcd.inf
 194 }
 195
 196 #
 197 #  SEC Phase modules
 198 #
 199 INF  OvmfPkg/Sec/SecMain.inf
 200
 201 #
 202 #  PEI Phase modules
 203 #
 204 INF  MdeModulePkg/Core/Pei/PeiMain.inf
 205 INF  RuleOverride=NORELOC MdeModulePkg/Universal/PCD/Pei/Pcd.inf
 206 INF  RuleOverride=NORELOC IntelFrameworkModulePkg/Universal/StatusCode/Pei/StatusCodePei.inf
 207 INF  RuleOverride=NORELOC OvmfPkg/PlatformPei/PlatformPei.inf
 208 INF  MdeModulePkg/Core/DxeIplPeim/DxeIpl.inf
 209
 210 #
 211 # This file contains the compressed 'DXEFV', which is compressed
 212 # in a single compression operation in order to achieve better
 213 # overall compression.
 214 #
 215 FILE FV_IMAGE = 20bc8ac9-94d1-4208-ab28-5d673fd73486 {
 216    SECTION GUIDED EE4E5898-3914-4259-9D6E-DC7BD79403CF PROCESSING_REQUIRED = TRUE { # LzmaCompress
 217       SECTION FV_IMAGE = DXEFV
 218    }
 219  }
 220
 221 INF  RuleOverride=RESET_VECTOR OvmfPkg/ResetVector/Bin/ResetVector.inf
 222
 223 ################################################################################
 224 #
 225 # Rules are use with the [FV] section's module INF type to define
 226 # how an FFS file is created for a given INF file. The following Rule are the default
 227 # rules for the different module type. User can add the customized rules to define the
 228 # content of the FFS file.
 229 #
 230 ################################################################################
 231
 232 [Rule.Common.PEI_CORE]
 233   FILE PEI_CORE = $(NAMED_GUID) {
 234     PE32     PE32   Align=32    |.efi
 235     UI       STRING ="$(MODULE_NAME)" Optional
 236     VERSION  STRING ="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
 237   }
 238
 239 [Rule.Common.SEC]
 240   FILE SEC = $(NAMED_GUID) {
 241     PE32     PE32           |.efi
 242     UI       STRING ="$(MODULE_NAME)" Optional
 243     VERSION  STRING ="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
 244   }
 245
 246 [Rule.Common.PEIM.NORELOC]
 247   FILE PEIM = $(NAMED_GUID) RELOCS_STRIPPED  {
 248      PEI_DEPEX PEI_DEPEX Optional        |.depex
 249      TE        TE                        |.efi
 250      UI        STRING="$(MODULE_NAME)" Optional
 251      VERSION   STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
 252   }
 253
 254 [Rule.Common.PEIM]
 255   FILE PEIM = $(NAMED_GUID) {
 256      PEI_DEPEX PEI_DEPEX Optional        |.depex
 257      PE32      PE32   Align=32           |.efi
 258      UI       STRING="$(MODULE_NAME)" Optional
 259      VERSION  STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
 260   }
 261
 262 [Rule.Common.PEIM.TIANOCOMPRESSED]
 263   FILE PEIM = $(NAMED_GUID) {
 264     PEI_DEPEX PEI_DEPEX Optional         |.depex
 265     GUIDED A31280AD-481E-41B6-95E8-127F4C984779 PROCESSING_REQUIRED = TRUE {
 266       PE32      PE32                     |.efi
 267       UI        STRING="$(MODULE_NAME)" Optional
 268       VERSION   STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
 269     }
 270   }
 271
 272 [Rule.Common.DXE_CORE]
 273   FILE DXE_CORE = $(NAMED_GUID) {
 274     PE32     PE32           |.efi
 275     UI       STRING="$(MODULE_NAME)" Optional
 276     VERSION  STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
 277   }
 278
 279 [Rule.Common.UEFI_DRIVER]
 280   FILE DRIVER = $(NAMED_GUID) {
 281     DXE_DEPEX    DXE_DEPEX Optional      |.depex
 282     PE32     PE32                    |.efi
 283     UI       STRING="$(MODULE_NAME)" Optional
 284     VERSION  STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
 285   }
 286
 287 [Rule.Common.DXE_DRIVER]
 288   FILE DRIVER = $(NAMED_GUID) {
 289     DXE_DEPEX    DXE_DEPEX Optional      |.depex
 290     PE32     PE32                    |.efi
 291     UI       STRING="$(MODULE_NAME)" Optional
 292     VERSION  STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
 293   }
 294
 295 [Rule.Common.DXE_RUNTIME_DRIVER]
 296   FILE DRIVER = $(NAMED_GUID) {
 297     DXE_DEPEX    DXE_DEPEX Optional      |.depex
 298     PE32     PE32                    |.efi
 299     UI       STRING="$(MODULE_NAME)" Optional
 300     VERSION  STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
 301   }
 302
 303 [Rule.Common.UEFI_APPLICATION]
 304   FILE APPLICATION = $(NAMED_GUID) {
 305     PE32     PE32                    |.efi
 306     UI       STRING="$(MODULE_NAME)" Optional
 307     VERSION  STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
 308   }
 309
 310 [Rule.Common.USER_DEFINED.ACPITABLE]
 311   FILE FREEFORM = $(NAMED_GUID) {
 312     RAW ACPI               |.acpi
 313     RAW ASL                |.aml
 314   }
 315
 316 [Rule.Common.SEC.RESET_VECTOR]
 317   FILE RAW = $(NAMED_GUID) {
 318     RAW RAW                |.raw
 319   }
 320
 321 [OptionRom.CirrusLogic5446]
 322 INF  OptionRomPkg/CirrusLogic5430Dxe/CirrusLogic5430Dxe.inf {
 323     PCI_DEVICE_ID  = 0x00B8
 324   }
 325