#include <Library/IoLib.h>\r
#include <Library/ArmLib.h>\r
#include <Library/PeCoffGetEntryPointLib.h>\r
+#include <Library/DebugAgentLib.h>\r
\r
#include <Ppi/GuidedSectionExtraction.h>\r
#include <Guid/LzmaDecompress.h>\r
\r
+#include <ArmEb/ArmEb.h>\r
+\r
#include "LzmaDecompress.h"\r
\r
VOID\r
SerialPortInitialize ();\r
}\r
\r
+VOID\r
+TimerInit (\r
+ VOID\r
+ )\r
+{\r
+ // configure SP810 to use 1MHz clock and disable\r
+ MmioAndThenOr32 (EB_SP810_CTRL_BASE + SP810_SYS_CTRL_REG, ~SP810_SYS_CTRL_TIMER2_EN, SP810_SYS_CTRL_TIMER2_TIMCLK);\r
+ // Enable\r
+ MmioOr32 (EB_SP810_CTRL_BASE + SP810_SYS_CTRL_REG, SP810_SYS_CTRL_TIMER2_EN);\r
+\r
+ // configure timer 2 for one shot operation, 32 bits, no prescaler, and interrupt disabled\r
+ MmioOr32 (EB_SP804_TIMER2_BASE + SP804_TIMER_CONTROL_REG, SP804_TIMER_CTRL_ONESHOT | SP804_TIMER_CTRL_32BIT | SP804_PRESCALE_DIV_1);\r
+\r
+ // preload the timer count register\r
+ MmioWrite32 (EB_SP804_TIMER2_BASE + SP804_TIMER_LOAD_REG, 1);\r
+\r
+ // enable the timer\r
+ MmioOr32 (EB_SP804_TIMER2_BASE + SP804_TIMER_CONTROL_REG, SP804_TIMER_CTRL_ENABLE);\r
+}\r
+\r
+\r
VOID\r
InitCache (\r
IN UINT32 MemoryBase,\r
VOID\r
);\r
\r
-/**\r
- If the build is done on cygwin the paths are cygpaths. \r
- /cygdrive/c/tmp.txt vs c:\tmp.txt so we need to convert\r
- them to work with RVD commands\r
-\r
- This is just code to help print out RVD symbol load command.\r
- If you build with cygwin paths aren't compatible with RVD.\r
-\r
- @param Name Path to convert if needed\r
-\r
-**/\r
-CHAR8 *\r
-SecDeCygwinPathIfNeeded (\r
- IN CHAR8 *Name\r
- )\r
-{\r
- CHAR8 *Ptr;\r
- UINTN Index;\r
- UINTN Len;\r
- \r
- Ptr = AsciiStrStr (Name, "/cygdrive/");\r
- if (Ptr == NULL) {\r
- return Name;\r
- }\r
- \r
- Len = AsciiStrLen (Ptr);\r
- \r
- // convert "/cygdrive" to spaces\r
- for (Index = 0; Index < 9; Index++) {\r
- Ptr[Index] = ' ';\r
- }\r
-\r
- // convert /c to c:\r
- Ptr[9] = Ptr[10];\r
- Ptr[10] = ':';\r
- \r
- // switch path seperators\r
- for (Index = 11; Index < Len; Index++) {\r
- if (Ptr[Index] == '/') {\r
- Ptr[Index] = '\\' ;\r
- }\r
- }\r
-\r
- return Name;\r
-}\r
-\r
\r
VOID\r
CEntryPoint (\r
\r
// Start talking\r
UartInit ();\r
- DEBUG ((EFI_D_ERROR, "UART Enabled\n"));\r
\r
- DEBUG_CODE_BEGIN ();\r
- //\r
- // On a debug build print out information about the SEC. This is really info about\r
- // the PE/COFF file we are currently running from. Useful for loading symbols in a\r
- // debugger. Remember our image is really part of the FV.\r
- //\r
- RETURN_STATUS Status;\r
- EFI_PEI_FV_HANDLE VolumeHandle;\r
- EFI_PEI_FILE_HANDLE FileHandle;\r
- VOID *PeCoffImage;\r
- UINT32 Offset;\r
- CHAR8 *FilePath;\r
- FfsAnyFvFindFirstFile (EFI_FV_FILETYPE_SECURITY_CORE, &VolumeHandle, &FileHandle);\r
- Status = FfsFindSectionData (EFI_SECTION_TE, FileHandle, &PeCoffImage);\r
- if (EFI_ERROR (Status)) {\r
- // Usually is a TE (PI striped down PE/COFF), but could be a full PE/COFF\r
- Status = FfsFindSectionData (EFI_SECTION_PE32, FileHandle, &PeCoffImage);\r
- }\r
- if (!EFI_ERROR (Status)) {\r
- Offset = PeCoffGetSizeOfHeaders (PeCoffImage);\r
- FilePath = PeCoffLoaderGetPdbPointer (PeCoffImage);\r
- if (FilePath != NULL) {\r
- \r
- // \r
- // In general you should never have to use #ifdef __CC_ARM in the code. It\r
- // is hidden in the away in the MdePkg. But here we would like to print differnt things\r
- // for different toolchains. \r
- //\r
-#ifdef __CC_ARM\r
- // Print out the command for the RVD debugger to load symbols for this image\r
- DEBUG ((EFI_D_ERROR, "load /a /ni /np %a &0x%08x\n", SecDeCygwinPathIfNeeded (FilePath), (CHAR8 *)PeCoffImage + Offset));\r
-#elif __GNUC__\r
- // This may not work correctly if you generate PE/COFF directlyas then the Offset would not be required\r
- DEBUG ((EFI_D_ERROR, "add-symbol-file %a 0x%08x\n", FilePath, PeCoffImage + Offset));\r
-#else\r
- DEBUG ((EFI_D_ERROR, "SEC starts at 0x%08x with an entry point at 0x%08x %a\n", PeCoffImage, _ModuleEntryPoint, FilePath));\r
-#endif\r
- }\r
- }\r
-\r
- \r
- DEBUG_CODE_END ();\r
+ InitializeDebugAgent (DEBUG_AGENT_INIT_PREMEM_SEC, NULL);\r
+ SaveAndSetDebugTimerInterrupt (TRUE);\r
+\r
+ DEBUG ((EFI_D_ERROR, "UART Enabled\n"));\r
\r
+ // Start up a free running timer so that the timer lib will work\r
+ TimerInit ();\r
\r
// SEC phase needs to run library constructors by hand.\r
ExtractGuidedSectionLibConstructor ();\r