MdeModulePkg/Xhci: Fill the 'interval' field for ISO endpoint context

[mirror_edk2.git] / MdeModulePkg / Bus / Pci / XhciDxe / XhciSched.c

diff --git a/MdeModulePkg/Bus/Pci/XhciDxe/XhciSched.c b/MdeModulePkg/Bus/Pci/XhciDxe/XhciSched.c
index b6078b1f0956572ded8dcc36aaf066431c1031be..58a2f984a9450a127e065f95fa8ec35580ef15c7 100644 (file)
--- a/MdeModulePkg/Bus/Pci/XhciDxe/XhciSched.c
+++ b/MdeModulePkg/Bus/Pci/XhciDxe/XhciSched.c
@@ -2,7 +2,7 @@
 \r
   XHCI transfer scheduling routines.\r
 \r
-Copyright (c) 2011 - 2015, Intel Corporation. All rights reserved.<BR>\r
+Copyright (c) 2011 - 2017, Intel Corporation. All rights reserved.<BR>\r
 This program and the accompanying materials\r
 are licensed and made available under the terms and conditions of the BSD License\r
 which accompanies this distribution.  The full text of the license may be found at\r
@@ -1167,7 +1167,7 @@ XhcCheckUrbResult (
       case TRB_COMPLETION_SHORT_PACKET:\r
       case TRB_COMPLETION_SUCCESS:\r
         if (EvtTrb->Completecode == TRB_COMPLETION_SHORT_PACKET) {\r
-          DEBUG ((EFI_D_ERROR, "XhcCheckUrbResult: short packet happens!\n"));\r
+          DEBUG ((EFI_D_VERBOSE, "XhcCheckUrbResult: short packet happens!\n"));\r
         }\r
 \r
         TRBType = (UINT8) (TRBPtr->Type);\r
@@ -2115,6 +2115,10 @@ XhcInitializeDeviceSlot (
   // 8) Issue an Address Device Command for the Device Slot, where the command points to the Input\r
   //    Context data structure described above.\r
   //\r
+  // Delay 10ms to meet TRSTRCY delay requirement in usb 2.0 spec chapter 7.1.7.5 before sending SetAddress() request\r
+  // to device.\r
+  //\r
+  gBS->Stall (XHC_RESET_RECOVERY_DELAY);\r
   ZeroMem (&CmdTrbAddr, sizeof (CmdTrbAddr));\r
   PhyAddr = UsbHcGetPciAddrForHostAddr (Xhc->MemPool, Xhc->UsbDevContext[SlotId].InputContext, sizeof (INPUT_CONTEXT));\r
   CmdTrbAddr.PtrLo    = XHC_LOW_32BIT (PhyAddr);\r
@@ -2321,6 +2325,10 @@ XhcInitializeDeviceSlot64 (
   // 8) Issue an Address Device Command for the Device Slot, where the command points to the Input\r
   //    Context data structure described above.\r
   //\r
+  // Delay 10ms to meet TRSTRCY delay requirement in usb 2.0 spec chapter 7.1.7.5 before sending SetAddress() request\r
+  // to device.\r
+  //\r
+  gBS->Stall (XHC_RESET_RECOVERY_DELAY);\r
   ZeroMem (&CmdTrbAddr, sizeof (CmdTrbAddr));\r
   PhyAddr = UsbHcGetPciAddrForHostAddr (Xhc->MemPool, Xhc->UsbDevContext[SlotId].InputContext, sizeof (INPUT_CONTEXT_64));\r
   CmdTrbAddr.PtrLo    = XHC_LOW_32BIT (PhyAddr);\r
@@ -2652,6 +2660,20 @@ XhcInitializeEndpointContext (
           InputContext->EP[Dci-1].CErr   = 0;\r
           InputContext->EP[Dci-1].EPType = ED_ISOCH_OUT;\r
         }\r
+        //\r
+        // Get the bInterval from descriptor and init the the interval field of endpoint context.\r
+        // Refer to XHCI 1.1 spec section 6.2.3.6.\r
+        //\r
+        if (DeviceSpeed == EFI_USB_SPEED_FULL) {\r
+          Interval = EpDesc->Interval;\r
+          ASSERT (Interval >= 1 && Interval <= 16);\r
+          InputContext->EP[Dci-1].Interval = Interval + 2;\r
+        } else if ((DeviceSpeed == EFI_USB_SPEED_HIGH) || (DeviceSpeed == EFI_USB_SPEED_SUPER)) {\r
+          Interval = EpDesc->Interval;\r
+          ASSERT (Interval >= 1 && Interval <= 16);\r
+          InputContext->EP[Dci-1].Interval = Interval - 1;\r
+        }\r
+\r
         //\r
         // Do not support isochronous transfer now.\r
         //\r
@@ -2820,6 +2842,20 @@ XhcInitializeEndpointContext64 (
           InputContext->EP[Dci-1].CErr   = 0;\r
           InputContext->EP[Dci-1].EPType = ED_ISOCH_OUT;\r
         }\r
+        //\r
+        // Get the bInterval from descriptor and init the the interval field of endpoint context.\r
+        // Refer to XHCI 1.1 spec section 6.2.3.6.\r
+        //\r
+        if (DeviceSpeed == EFI_USB_SPEED_FULL) {\r
+          Interval = EpDesc->Interval;\r
+          ASSERT (Interval >= 1 && Interval <= 16);\r
+          InputContext->EP[Dci-1].Interval = Interval + 2;\r
+        } else if ((DeviceSpeed == EFI_USB_SPEED_HIGH) || (DeviceSpeed == EFI_USB_SPEED_SUPER)) {\r
+          Interval = EpDesc->Interval;\r
+          ASSERT (Interval >= 1 && Interval <= 16);\r
+          InputContext->EP[Dci-1].Interval = Interval - 1;\r
+        }\r
+\r
         //\r
         // Do not support isochronous transfer now.\r
         //\r