/** @file\r
SMM IPL that produces SMM related runtime protocols and load the SMM Core into SMRAM\r
\r
- Copyright (c) 2009 - 2015, Intel Corporation. All rights reserved.<BR>\r
- This program and the accompanying materials are licensed and made available \r
- under the terms and conditions of the BSD License which accompanies this \r
- distribution. The full text of the license may be found at \r
- http://opensource.org/licenses/bsd-license.php \r
+ Copyright (c) 2009 - 2018, Intel Corporation. All rights reserved.<BR>\r
+ This program and the accompanying materials are licensed and made available\r
+ under the terms and conditions of the BSD License which accompanies this\r
+ distribution. The full text of the license may be found at\r
+ http://opensource.org/licenses/bsd-license.php\r
\r
- THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, \r
- WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. \r
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,\r
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.\r
\r
**/\r
\r
#include <Library/UefiLib.h>\r
#include <Library/UefiRuntimeLib.h>\r
#include <Library/PcdLib.h>\r
+#include <Library/ReportStatusCodeLib.h>\r
\r
#include "PiSmmCorePrivateData.h"\r
\r
+#define SMRAM_CAPABILITIES (EFI_MEMORY_WB | EFI_MEMORY_UC)\r
+\r
+#define MEMORY_CACHE_ATTRIBUTES (EFI_MEMORY_UC | EFI_MEMORY_WC | \\r
+ EFI_MEMORY_WT | EFI_MEMORY_WB | \\r
+ EFI_MEMORY_WP | EFI_MEMORY_UCE)\r
+\r
+#define MEMORY_PAGE_ATTRIBUTES (EFI_MEMORY_XP | EFI_MEMORY_RP | EFI_MEMORY_RO)\r
+\r
//\r
// Function prototypes from produced protocols\r
//\r
\r
/**\r
Communicates with a registered handler.\r
- \r
- This function provides a service to send and receive messages from a registered \r
- UEFI service. This function is part of the SMM Communication Protocol that may \r
- be called in physical mode prior to SetVirtualAddressMap() and in virtual mode \r
+\r
+ This function provides a service to send and receive messages from a registered\r
+ UEFI service. This function is part of the SMM Communication Protocol that may\r
+ be called in physical mode prior to SetVirtualAddressMap() and in virtual mode\r
after SetVirtualAddressMap().\r
\r
- @param[in] This The EFI_SMM_COMMUNICATION_PROTOCOL instance.\r
- @param[in, out] CommBuffer A pointer to the buffer to convey into SMRAM.\r
- @param[in, out] CommSize The size of the data buffer being passed in.On exit, the size of data\r
- being returned. Zero if the handler does not wish to reply with any data.\r
+ @param[in] This The EFI_SMM_COMMUNICATION_PROTOCOL instance.\r
+ @param[in, out] CommBuffer A pointer to the buffer to convey into SMRAM.\r
+ @param[in, out] CommSize The size of the data buffer being passed in. On exit, the size of data\r
+ being returned. Zero if the handler does not wish to reply with any data.\r
+ This parameter is optional and may be NULL.\r
+\r
+ @retval EFI_SUCCESS The message was successfully posted.\r
+ @retval EFI_INVALID_PARAMETER The CommBuffer was NULL.\r
+ @retval EFI_BAD_BUFFER_SIZE The buffer is too large for the MM implementation.\r
+ If this error is returned, the MessageLength field\r
+ in the CommBuffer header or the integer pointed by\r
+ CommSize, are updated to reflect the maximum payload\r
+ size the implementation can accommodate.\r
+ @retval EFI_ACCESS_DENIED The CommunicateBuffer parameter or CommSize parameter,\r
+ if not omitted, are in address range that cannot be\r
+ accessed by the MM environment.\r
\r
- @retval EFI_SUCCESS The message was successfully posted.\r
- @retval EFI_INVALID_PARAMETER The CommBuffer was NULL.\r
**/\r
EFI_STATUS\r
EFIAPI\r
SmmCommunicationCommunicate (\r
IN CONST EFI_SMM_COMMUNICATION_PROTOCOL *This,\r
IN OUT VOID *CommBuffer,\r
- IN OUT UINTN *CommSize\r
+ IN OUT UINTN *CommSize OPTIONAL\r
);\r
\r
/**\r
IN VOID *Context\r
);\r
\r
+/**\r
+ Event notification that is fired when EndOfDxe Event Group is signaled.\r
+\r
+ @param Event The Event that is being processed, not used.\r
+ @param Context Event Context, not used.\r
+\r
+**/\r
+VOID\r
+EFIAPI\r
+SmmIplEndOfDxeEventNotify (\r
+ IN EFI_EVENT Event,\r
+ IN VOID *Context\r
+ );\r
+\r
/**\r
Notification function of EVT_SIGNAL_VIRTUAL_ADDRESS_CHANGE.\r
\r
);\r
\r
//\r
-// Data structure used to declare a table of protocol notifications and event \r
+// Data structure used to declare a table of protocol notifications and event\r
// notifications required by the SMM IPL\r
//\r
typedef struct {\r
EFI_SMM_ACCESS2_PROTOCOL *mSmmAccess;\r
EFI_SMRAM_DESCRIPTOR *mCurrentSmramRange;\r
BOOLEAN mSmmLocked = FALSE;\r
+BOOLEAN mEndOfDxe = FALSE;\r
EFI_PHYSICAL_ADDRESS mSmramCacheBase;\r
UINT64 mSmramCacheSize;\r
\r
+EFI_SMM_COMMUNICATE_HEADER mCommunicateHeader;\r
+EFI_LOAD_FIXED_ADDRESS_CONFIGURATION_TABLE *mLMFAConfigurationTable = NULL;\r
+\r
//\r
// Table of Protocol notification and GUIDed Event notifications that the SMM IPL requires\r
//\r
SMM_IPL_EVENT_NOTIFICATION mSmmIplEvents[] = {\r
//\r
- // Declare protocol notification on the SMM Configuration protocol. When this notification is etablished, \r
- // the associated event is immediately signalled, so the notification function will be executed and the \r
+ // Declare protocol notification on the SMM Configuration protocol. When this notification is established,\r
+ // the associated event is immediately signalled, so the notification function will be executed and the\r
// SMM Configuration Protocol will be found if it is already in the handle database.\r
//\r
{ TRUE, FALSE, &gEfiSmmConfigurationProtocolGuid, SmmIplSmmConfigurationEventNotify, &gEfiSmmConfigurationProtocolGuid, TPL_NOTIFY, NULL },\r
//\r
- // Declare protocol notification on DxeSmmReadyToLock protocols. When this notification is established, \r
- // the associated event is immediately signalled, so the notification function will be executed and the \r
+ // Declare protocol notification on DxeSmmReadyToLock protocols. When this notification is established,\r
+ // the associated event is immediately signalled, so the notification function will be executed and the\r
// DXE SMM Ready To Lock Protocol will be found if it is already in the handle database.\r
//\r
{ TRUE, TRUE, &gEfiDxeSmmReadyToLockProtocolGuid, SmmIplReadyToLockEventNotify, &gEfiDxeSmmReadyToLockProtocolGuid, TPL_CALLBACK, NULL },\r
//\r
- // Declare event notification on EndOfDxe event. When this notification is etablished, \r
- // the associated event is immediately signalled, so the notification function will be executed and the \r
+ // Declare event notification on EndOfDxe event. When this notification is established,\r
+ // the associated event is immediately signalled, so the notification function will be executed and the\r
// SMM End Of Dxe Protocol will be found if it is already in the handle database.\r
//\r
{ FALSE, TRUE, &gEfiEndOfDxeEventGroupGuid, SmmIplGuidedEventNotify, &gEfiEndOfDxeEventGroupGuid, TPL_CALLBACK, NULL },\r
//\r
+ // Declare event notification on EndOfDxe event. This is used to set EndOfDxe event signaled flag.\r
+ //\r
+ { FALSE, TRUE, &gEfiEndOfDxeEventGroupGuid, SmmIplEndOfDxeEventNotify, &gEfiEndOfDxeEventGroupGuid, TPL_CALLBACK, NULL },\r
+ //\r
// Declare event notification on the DXE Dispatch Event Group. This event is signaled by the DXE Core\r
// each time the DXE Core dispatcher has completed its work. When this event is signalled, the SMM Core\r
// if notified, so the SMM Core can dispatch SMM drivers.\r
//\r
{ FALSE, TRUE, &gEfiEventReadyToBootGuid, SmmIplReadyToLockEventNotify, &gEfiEventReadyToBootGuid, TPL_CALLBACK, NULL },\r
//\r
- // Declare event notification on Legacy Boot Event Group. This is used to inform the SMM Core that the platform \r
- // is performing a legacy boot operation, and that the UEFI environment is no longer available and the SMM Core \r
+ // Declare event notification on Legacy Boot Event Group. This is used to inform the SMM Core that the platform\r
+ // is performing a legacy boot operation, and that the UEFI environment is no longer available and the SMM Core\r
// must guarantee that it does not access any UEFI related structures outside of SMRAM.\r
// It is also to inform the SMM Core to notify SMM driver that system enter legacy boot.\r
//\r
//\r
{ FALSE, FALSE, &gEfiEventReadyToBootGuid, SmmIplGuidedEventNotify, &gEfiEventReadyToBootGuid, TPL_CALLBACK, NULL },\r
//\r
- // Declare event notification on SetVirtualAddressMap() Event Group. This is used to convert gSmmCorePrivate \r
+ // Declare event notification on SetVirtualAddressMap() Event Group. This is used to convert gSmmCorePrivate\r
// and mSmmControl2 from physical addresses to virtual addresses.\r
//\r
{ FALSE, FALSE, &gEfiEventVirtualAddressChangeGuid, SmmIplSetVirtualAddressNotify, NULL, TPL_CALLBACK, NULL },\r
\r
/**\r
Find the maximum SMRAM cache range that covers the range specified by SmramRange.\r
- \r
+\r
This function searches and joins all adjacent ranges of SmramRange into a range to be cached.\r
\r
@param SmramRange The SMRAM range to search from.\r
}\r
}\r
} while (FoundAjacentRange);\r
- \r
+\r
}\r
\r
/**\r
if ((This == NULL) ||(Smst == NULL)) {\r
return EFI_INVALID_PARAMETER;\r
}\r
- \r
+\r
if (!gSmmCorePrivate->InSmm) {\r
return EFI_UNSUPPORTED;\r
}\r
- \r
+\r
*Smst = gSmmCorePrivate->Smst;\r
\r
return EFI_SUCCESS;\r
\r
/**\r
Communicates with a registered handler.\r
- \r
- This function provides a service to send and receive messages from a registered \r
- UEFI service. This function is part of the SMM Communication Protocol that may \r
- be called in physical mode prior to SetVirtualAddressMap() and in virtual mode \r
+\r
+ This function provides a service to send and receive messages from a registered\r
+ UEFI service. This function is part of the SMM Communication Protocol that may\r
+ be called in physical mode prior to SetVirtualAddressMap() and in virtual mode\r
after SetVirtualAddressMap().\r
\r
@param[in] This The EFI_SMM_COMMUNICATION_PROTOCOL instance.\r
- @param[in, out] CommBuffer A pointer to the buffer to convey into SMRAM.\r
- @param[in, out] CommSize The size of the data buffer being passed in.On exit, the size of data\r
+ @param[in, out] CommBuffer A pointer to the buffer to convey into SMRAM.\r
+ @param[in, out] CommSize The size of the data buffer being passed in. On exit, the size of data\r
being returned. Zero if the handler does not wish to reply with any data.\r
+ This parameter is optional and may be NULL.\r
\r
@retval EFI_SUCCESS The message was successfully posted.\r
@retval EFI_INVALID_PARAMETER The CommBuffer was NULL.\r
+ @retval EFI_BAD_BUFFER_SIZE The buffer is too large for the MM implementation.\r
+ If this error is returned, the MessageLength field\r
+ in the CommBuffer header or the integer pointed by\r
+ CommSize, are updated to reflect the maximum payload\r
+ size the implementation can accommodate.\r
+ @retval EFI_ACCESS_DENIED The CommunicateBuffer parameter or CommSize parameter,\r
+ if not omitted, are in address range that cannot be\r
+ accessed by the MM environment.\r
+\r
**/\r
EFI_STATUS\r
EFIAPI\r
SmmCommunicationCommunicate (\r
IN CONST EFI_SMM_COMMUNICATION_PROTOCOL *This,\r
IN OUT VOID *CommBuffer,\r
- IN OUT UINTN *CommSize\r
+ IN OUT UINTN *CommSize OPTIONAL\r
)\r
{\r
EFI_STATUS Status;\r
EFI_SMM_COMMUNICATE_HEADER *CommunicateHeader;\r
BOOLEAN OldInSmm;\r
+ UINTN TempCommSize;\r
\r
//\r
// Check parameters\r
//\r
- if ((CommBuffer == NULL) || (CommSize == NULL)) {\r
+ if (CommBuffer == NULL) {\r
return EFI_INVALID_PARAMETER;\r
}\r
\r
- //\r
- // CommSize must hold HeaderGuid and MessageLength\r
- //\r
- if (*CommSize < OFFSET_OF (EFI_SMM_COMMUNICATE_HEADER, Data)) {\r
- return EFI_INVALID_PARAMETER;\r
+ CommunicateHeader = (EFI_SMM_COMMUNICATE_HEADER *) CommBuffer;\r
+\r
+ if (CommSize == NULL) {\r
+ TempCommSize = OFFSET_OF (EFI_SMM_COMMUNICATE_HEADER, Data) + CommunicateHeader->MessageLength;\r
+ } else {\r
+ TempCommSize = *CommSize;\r
+ //\r
+ // CommSize must hold HeaderGuid and MessageLength\r
+ //\r
+ if (TempCommSize < OFFSET_OF (EFI_SMM_COMMUNICATE_HEADER, Data)) {\r
+ return EFI_INVALID_PARAMETER;\r
+ }\r
}\r
\r
//\r
// Put arguments for Software SMI in gSmmCorePrivate\r
//\r
gSmmCorePrivate->CommunicationBuffer = CommBuffer;\r
- gSmmCorePrivate->BufferSize = *CommSize;\r
+ gSmmCorePrivate->BufferSize = TempCommSize;\r
\r
//\r
// Generate Software SMI\r
}\r
\r
//\r
- // Return status from software SMI \r
+ // Return status from software SMI\r
//\r
- *CommSize = gSmmCorePrivate->BufferSize;\r
+ if (CommSize != NULL) {\r
+ *CommSize = gSmmCorePrivate->BufferSize;\r
+ }\r
return gSmmCorePrivate->ReturnStatus;\r
}\r
\r
//\r
// If we are in SMM, then the execution mode must be physical, which means that\r
// OS established virtual addresses can not be used. If SetVirtualAddressMap()\r
- // has been called, then a direct invocation of the Software SMI is not \r
- // not allowed so return EFI_INVALID_PARAMETER.\r
+ // has been called, then a direct invocation of the Software SMI is not allowed,\r
+ // so return EFI_INVALID_PARAMETER.\r
//\r
if (EfiGoneVirtual()) {\r
return EFI_INVALID_PARAMETER;\r
if ((!gSmmCorePrivate->InSmm) && (!mSmmAccess->OpenState || mSmmAccess->LockState)) {\r
return EFI_INVALID_PARAMETER;\r
}\r
- \r
+\r
//\r
// Save current InSmm state and set InSmm state to TRUE\r
//\r
gSmmCorePrivate->InSmm = TRUE;\r
\r
//\r
- // Already in SMM and before SetVirtualAddressMap(), so call SmiManage() directly.\r
+ // Before SetVirtualAddressMap(), we are in SMM or SMRAM is open and unlocked, call SmiManage() directly.\r
//\r
- CommunicateHeader = (EFI_SMM_COMMUNICATE_HEADER *)CommBuffer;\r
- *CommSize -= OFFSET_OF (EFI_SMM_COMMUNICATE_HEADER, Data);\r
+ TempCommSize -= OFFSET_OF (EFI_SMM_COMMUNICATE_HEADER, Data);\r
Status = gSmmCorePrivate->Smst->SmiManage (\r
- &CommunicateHeader->HeaderGuid, \r
- NULL, \r
- CommunicateHeader->Data, \r
- CommSize\r
+ &CommunicateHeader->HeaderGuid,\r
+ NULL,\r
+ CommunicateHeader->Data,\r
+ &TempCommSize\r
);\r
-\r
- //\r
- // Update CommunicationBuffer, BufferSize and ReturnStatus\r
- // Communicate service finished, reset the pointer to CommBuffer to NULL\r
- //\r
- *CommSize += OFFSET_OF (EFI_SMM_COMMUNICATE_HEADER, Data);\r
+ TempCommSize += OFFSET_OF (EFI_SMM_COMMUNICATE_HEADER, Data);\r
+ if (CommSize != NULL) {\r
+ *CommSize = TempCommSize;\r
+ }\r
\r
//\r
// Restore original InSmm state\r
IN VOID *Context\r
)\r
{\r
- EFI_SMM_COMMUNICATE_HEADER CommunicateHeader;\r
UINTN Size;\r
\r
//\r
- // Use Guid to initialize EFI_SMM_COMMUNICATE_HEADER structure \r
+ // Use Guid to initialize EFI_SMM_COMMUNICATE_HEADER structure\r
//\r
- CopyGuid (&CommunicateHeader.HeaderGuid, (EFI_GUID *)Context);\r
- CommunicateHeader.MessageLength = 1;\r
- CommunicateHeader.Data[0] = 0;\r
+ CopyGuid (&mCommunicateHeader.HeaderGuid, (EFI_GUID *)Context);\r
+ mCommunicateHeader.MessageLength = 1;\r
+ mCommunicateHeader.Data[0] = 0;\r
\r
//\r
// Generate the Software SMI and return the result\r
//\r
- Size = sizeof (CommunicateHeader);\r
- SmmCommunicationCommunicate (&mSmmCommunication, &CommunicateHeader, &Size);\r
+ Size = sizeof (mCommunicateHeader);\r
+ SmmCommunicationCommunicate (&mSmmCommunication, &mCommunicateHeader, &Size);\r
+}\r
+\r
+/**\r
+ Event notification that is fired when EndOfDxe Event Group is signaled.\r
+\r
+ @param Event The Event that is being processed, not used.\r
+ @param Context Event Context, not used.\r
+\r
+**/\r
+VOID\r
+EFIAPI\r
+SmmIplEndOfDxeEventNotify (\r
+ IN EFI_EVENT Event,\r
+ IN VOID *Context\r
+ )\r
+{\r
+ mEndOfDxe = TRUE;\r
}\r
\r
/**\r
IN VOID *Context\r
)\r
{\r
- EFI_SMM_COMMUNICATE_HEADER CommunicateHeader;\r
UINTN Size;\r
EFI_STATUS Status;\r
\r
// Clear the buffer passed into the Software SMI. This buffer will return\r
// the status of the SMM Core Dispatcher.\r
//\r
- CopyGuid (&CommunicateHeader.HeaderGuid, (EFI_GUID *)Context);\r
- CommunicateHeader.MessageLength = 1;\r
- CommunicateHeader.Data[0] = 0;\r
+ CopyGuid (&mCommunicateHeader.HeaderGuid, (EFI_GUID *)Context);\r
+ mCommunicateHeader.MessageLength = 1;\r
+ mCommunicateHeader.Data[0] = 0;\r
\r
//\r
// Generate the Software SMI and return the result\r
//\r
- Size = sizeof (CommunicateHeader);\r
- SmmCommunicationCommunicate (&mSmmCommunication, &CommunicateHeader, &Size);\r
- \r
+ Size = sizeof (mCommunicateHeader);\r
+ SmmCommunicationCommunicate (&mSmmCommunication, &mCommunicateHeader, &Size);\r
+\r
//\r
// Return if there is no request to restart the SMM Core Dispatcher\r
//\r
- if (CommunicateHeader.Data[0] != COMM_BUFFER_SMM_DISPATCH_RESTART) {\r
+ if (mCommunicateHeader.Data[0] != COMM_BUFFER_SMM_DISPATCH_RESTART) {\r
return;\r
}\r
- \r
+\r
//\r
// Attempt to reset SMRAM cacheability to UC\r
// Assume CPU AP is available at this time\r
//\r
Status = gDS->SetMemorySpaceAttributes(\r
- mSmramCacheBase, \r
+ mSmramCacheBase,\r
mSmramCacheSize,\r
EFI_MEMORY_UC\r
);\r
if (EFI_ERROR (Status)) {\r
DEBUG ((DEBUG_WARN, "SMM IPL failed to reset SMRAM window to EFI_MEMORY_UC\n"));\r
- } \r
+ }\r
\r
//\r
// Close all SMRAM ranges to protect SMRAM\r
ASSERT_EFI_ERROR (Status);\r
\r
//\r
- // Set flag to indicate that the SMM Entry Point has been registered which \r
+ // Set flag to indicate that the SMM Entry Point has been registered which\r
// means that SMIs are now fully operational.\r
//\r
gSmmCorePrivate->SmmEntryPointRegistered = TRUE;\r
if (mSmmLocked) {\r
return;\r
}\r
- \r
+\r
//\r
// Make sure this notification is for this handler\r
//\r
}\r
} else {\r
//\r
- // If SMM is not locked yet and we got here from gEfiEventReadyToBootGuid being \r
+ // If SMM is not locked yet and we got here from gEfiEventReadyToBootGuid being\r
// signaled, then gEfiDxeSmmReadyToLockProtocolGuid was not installed as expected.\r
// Print a warning on debug builds.\r
//\r
DEBUG ((DEBUG_WARN, "SMM IPL! DXE SMM Ready To Lock Protocol not installed before Ready To Boot signal\n"));\r
}\r
\r
+ if (!mEndOfDxe) {\r
+ DEBUG ((DEBUG_ERROR, "EndOfDxe Event must be signaled before DxeSmmReadyToLock Protocol installation!\n"));\r
+ REPORT_STATUS_CODE (\r
+ EFI_ERROR_CODE | EFI_ERROR_UNRECOVERED,\r
+ (EFI_SOFTWARE_SMM_DRIVER | EFI_SW_EC_ILLEGAL_SOFTWARE_STATE)\r
+ );\r
+ ASSERT (FALSE);\r
+ }\r
+\r
//\r
// Lock the SMRAM (Note: Locking SMRAM may not be supported on all platforms)\r
//\r
mSmmAccess->Lock (mSmmAccess);\r
- \r
+\r
//\r
- // Close protocol and event notification events that do not apply after the \r
- // DXE SMM Ready To Lock Protocol has been installed or the Ready To Boot \r
+ // Close protocol and event notification events that do not apply after the\r
+ // DXE SMM Ready To Lock Protocol has been installed or the Ready To Boot\r
// event has been signalled.\r
//\r
for (Index = 0; mSmmIplEvents[Index].NotifyFunction != NULL; Index++) {\r
// Print debug message that the SMRAM window is now locked.\r
//\r
DEBUG ((DEBUG_INFO, "SMM IPL locked SMRAM window\n"));\r
- \r
+\r
//\r
// Set flag so this operation will not be performed again\r
//\r
}\r
\r
/**\r
- Get the fixed loadding address from image header assigned by build tool. This function only be called\r
+ Get the fixed loading address from image header assigned by build tool. This function only be called\r
when Loading module at Fixed address feature enabled.\r
\r
@param ImageContext Pointer to the image context structure that describes the PE/COFF\r
image that needs to be examined by this function.\r
@retval EFI_SUCCESS An fixed loading address is assigned to this image by build tools .\r
- @retval EFI_NOT_FOUND The image has no assigned fixed loadding address.\r
+ @retval EFI_NOT_FOUND The image has no assigned fixed loading address.\r
**/\r
EFI_STATUS\r
GetPeCoffImageFixLoadingAssignedAddress(\r
EFI_STATUS Status;\r
EFI_IMAGE_SECTION_HEADER SectionHeader;\r
EFI_IMAGE_OPTIONAL_HEADER_UNION *ImgHdr;\r
- EFI_PHYSICAL_ADDRESS FixLoaddingAddress;\r
+ EFI_PHYSICAL_ADDRESS FixLoadingAddress;\r
UINT16 Index;\r
UINTN Size;\r
UINT16 NumberOfSections;\r
// Build tool will calculate the smm code size and then patch the PcdLoadFixAddressSmmCodePageNumber\r
//\r
SmmCodeSize = EFI_PAGES_TO_SIZE (PcdGet32(PcdLoadFixAddressSmmCodePageNumber));\r
- \r
- FixLoaddingAddress = 0;\r
+\r
+ FixLoadingAddress = 0;\r
Status = EFI_NOT_FOUND;\r
- SmramBase = mCurrentSmramRange->CpuStart;\r
+ SmramBase = mLMFAConfigurationTable->SmramBase;\r
//\r
// Get PeHeader pointer\r
//\r
ImgHdr = (EFI_IMAGE_OPTIONAL_HEADER_UNION *)((CHAR8* )ImageContext->Handle + ImageContext->PeCoffHeaderOffset);\r
- SectionHeaderOffset = (UINTN)(\r
- ImageContext->PeCoffHeaderOffset +\r
- sizeof (UINT32) +\r
- sizeof (EFI_IMAGE_FILE_HEADER) +\r
- ImgHdr->Pe32.FileHeader.SizeOfOptionalHeader\r
- );\r
+ SectionHeaderOffset = ImageContext->PeCoffHeaderOffset +\r
+ sizeof (UINT32) +\r
+ sizeof (EFI_IMAGE_FILE_HEADER) +\r
+ ImgHdr->Pe32.FileHeader.SizeOfOptionalHeader;\r
NumberOfSections = ImgHdr->Pe32.FileHeader.NumberOfSections;\r
\r
//\r
if (EFI_ERROR (Status)) {\r
return Status;\r
}\r
- \r
+\r
Status = EFI_NOT_FOUND;\r
- \r
+\r
if ((SectionHeader.Characteristics & EFI_IMAGE_SCN_CNT_CODE) == 0) {\r
//\r
// Build tool saves the offset to SMRAM base as image base in PointerToRelocations & PointerToLineNumbers fields in the\r
// first section header that doesn't point to code section in image header. And there is an assumption that when the\r
// feature is enabled, if a module is assigned a loading address by tools, PointerToRelocations & PointerToLineNumbers\r
- // fields should NOT be Zero, or else, these 2 fileds should be set to Zero\r
+ // fields should NOT be Zero, or else, these 2 fields should be set to Zero\r
//\r
ValueInSectionHeader = ReadUnaligned64((UINT64*)&SectionHeader.PointerToRelocations);\r
if (ValueInSectionHeader != 0) {\r
//\r
- // Found first section header that doesn't point to code section in which uild tool saves the\r
+ // Found first section header that doesn't point to code section in which build tool saves the\r
// offset to SMRAM base as image base in PointerToRelocations & PointerToLineNumbers fields\r
//\r
- FixLoaddingAddress = (EFI_PHYSICAL_ADDRESS)(SmramBase + (INT64)ValueInSectionHeader);\r
+ FixLoadingAddress = (EFI_PHYSICAL_ADDRESS)(SmramBase + (INT64)ValueInSectionHeader);\r
\r
- if (SmramBase + SmmCodeSize > FixLoaddingAddress && SmramBase <= FixLoaddingAddress) {\r
+ if (SmramBase + SmmCodeSize > FixLoadingAddress && SmramBase <= FixLoadingAddress) {\r
//\r
- // The assigned address is valid. Return the specified loadding address\r
+ // The assigned address is valid. Return the specified loading address\r
//\r
- ImageContext->ImageAddress = FixLoaddingAddress;\r
+ ImageContext->ImageAddress = FixLoadingAddress;\r
Status = EFI_SUCCESS;\r
}\r
}\r
}\r
SectionHeaderOffset += sizeof (EFI_IMAGE_SECTION_HEADER);\r
}\r
- DEBUG ((EFI_D_INFO|EFI_D_LOAD, "LOADING MODULE FIXED INFO: Loading module at fixed address %x, Status = %r \n", FixLoaddingAddress, Status));\r
+ DEBUG ((EFI_D_INFO|EFI_D_LOAD, "LOADING MODULE FIXED INFO: Loading module at fixed address %x, Status = %r \n", FixLoadingAddress, Status));\r
return Status;\r
}\r
/**\r
Load the SMM Core image into SMRAM and executes the SMM Core from SMRAM.\r
\r
- @param[in, out] SmramRange Descriptor for the range of SMRAM to reload the \r
+ @param[in, out] SmramRange Descriptor for the range of SMRAM to reload the\r
currently executing image, the rang of SMRAM to\r
hold SMM Core will be excluded.\r
@param[in, out] SmramRangeSmmCore Descriptor for the range of SMRAM to hold SMM Core.\r
\r
//\r
// Search all Firmware Volumes for a PE/COFF image in a file of type SMM_CORE\r
- // \r
+ //\r
Status = GetSectionFromAnyFvByFileType (\r
- EFI_FV_FILETYPE_SMM_CORE, \r
+ EFI_FV_FILETYPE_SMM_CORE,\r
0,\r
- EFI_SECTION_PE32, \r
+ EFI_SECTION_PE32,\r
0,\r
- &SourceBuffer, \r
+ &SourceBuffer,\r
&SourceSize\r
);\r
if (EFI_ERROR (Status)) {\r
return Status;\r
}\r
- \r
+\r
//\r
// Initilize ImageContext\r
//\r
return Status;\r
}\r
//\r
- // if Loading module at Fixed Address feature is enabled, the SMM core driver will be loaded to \r
+ // if Loading module at Fixed Address feature is enabled, the SMM core driver will be loaded to\r
// the address assigned by build tool.\r
//\r
if (PcdGet64(PcdLoadModuleAtFixAddressEnable) != 0) {\r
// Since the memory range to load SMM CORE will be cut out in SMM core, so no need to allocate and free this range\r
//\r
PageCount = 0;\r
+ //\r
+ // Reserved Smram Region for SmmCore is not used, and remove it from SmramRangeCount.\r
+ //\r
+ gSmmCorePrivate->SmramRangeCount --;\r
} else {\r
DEBUG ((EFI_D_INFO, "LOADING MODULE FIXED ERROR: Loading module at fixed address at address failed\n"));\r
//\r
- // Allocate memory for the image being loaded from the EFI_SRAM_DESCRIPTOR \r
+ // Allocate memory for the image being loaded from the EFI_SRAM_DESCRIPTOR\r
// specified by SmramRange\r
//\r
PageCount = (UINTN)EFI_SIZE_TO_PAGES((UINTN)ImageContext.ImageSize + ImageContext.SectionAlignment);\r
}\r
} else {\r
//\r
- // Allocate memory for the image being loaded from the EFI_SRAM_DESCRIPTOR \r
+ // Allocate memory for the image being loaded from the EFI_SRAM_DESCRIPTOR\r
// specified by SmramRange\r
//\r
PageCount = (UINTN)EFI_SIZE_TO_PAGES((UINTN)ImageContext.ImageSize + ImageContext.SectionAlignment);\r
//\r
ImageContext.ImageAddress = SmramRangeSmmCore->CpuStart;\r
}\r
- \r
+\r
ImageContext.ImageAddress += ImageContext.SectionAlignment - 1;\r
- ImageContext.ImageAddress &= ~((EFI_PHYSICAL_ADDRESS)(ImageContext.SectionAlignment - 1));\r
+ ImageContext.ImageAddress &= ~((EFI_PHYSICAL_ADDRESS)ImageContext.SectionAlignment - 1);\r
\r
//\r
// Print debug message showing SMM Core load address.\r
UINTN Index2;\r
EFI_SMRAM_DESCRIPTOR *FullSmramRanges;\r
UINTN TempSmramRangeCount;\r
+ UINTN AdditionSmramRangeCount;\r
EFI_SMRAM_DESCRIPTOR *TempSmramRanges;\r
UINTN SmramRangeCount;\r
EFI_SMRAM_DESCRIPTOR *SmramRanges;\r
}\r
}\r
\r
+ //\r
+ // Reserve one entry for SMM Core in the full SMRAM ranges.\r
+ //\r
+ AdditionSmramRangeCount = 1;\r
+ if (PcdGet64(PcdLoadModuleAtFixAddressEnable) != 0) {\r
+ //\r
+ // Reserve two entries for all SMM drivers and SMM Core in the full SMRAM ranges.\r
+ //\r
+ AdditionSmramRangeCount = 2;\r
+ }\r
+\r
if (SmramReservedCount == 0) {\r
//\r
// No reserved SMRAM entry from SMM Configuration Protocol.\r
- // Reserve one entry for SMM Core in the full SMRAM ranges.\r
//\r
- *FullSmramRangeCount = SmramRangeCount + 1;\r
+ *FullSmramRangeCount = SmramRangeCount + AdditionSmramRangeCount;\r
Size = (*FullSmramRangeCount) * sizeof (EFI_SMRAM_DESCRIPTOR);\r
FullSmramRanges = (EFI_SMRAM_DESCRIPTOR *) AllocateZeroPool (Size);\r
ASSERT (FullSmramRanges != NULL);\r
ASSERT (TempSmramRangeCount <= MaxCount);\r
\r
//\r
- // Sort the entries,\r
- // and reserve one entry for SMM Core in the full SMRAM ranges.\r
+ // Sort the entries\r
//\r
- FullSmramRanges = AllocateZeroPool ((TempSmramRangeCount + 1) * sizeof (EFI_SMRAM_DESCRIPTOR));\r
+ FullSmramRanges = AllocateZeroPool ((TempSmramRangeCount + AdditionSmramRangeCount) * sizeof (EFI_SMRAM_DESCRIPTOR));\r
ASSERT (FullSmramRanges != NULL);\r
*FullSmramRangeCount = 0;\r
do {\r
TempSmramRanges[Index].PhysicalSize = 0;\r
} while (*FullSmramRangeCount < TempSmramRangeCount);\r
ASSERT (*FullSmramRangeCount == TempSmramRangeCount);\r
- *FullSmramRangeCount += 1;\r
+ *FullSmramRangeCount += AdditionSmramRangeCount;\r
\r
FreePool (SmramRanges);\r
FreePool (SmramReservedRanges);\r
/**\r
The Entry Point for SMM IPL\r
\r
- Load SMM Core into SMRAM, register SMM Core entry point for SMIs, install \r
- SMM Base 2 Protocol and SMM Communication Protocol, and register for the \r
+ Load SMM Core into SMRAM, register SMM Core entry point for SMIs, install\r
+ SMM Base 2 Protocol and SMM Communication Protocol, and register for the\r
critical events required to coordinate between DXE and SMM environments.\r
- \r
+\r
@param ImageHandle The firmware allocated handle for the EFI image.\r
@param SystemTable A pointer to the EFI System Table.\r
\r
UINT64 MaxSize;\r
VOID *Registration;\r
UINT64 SmmCodeSize;\r
- EFI_LOAD_FIXED_ADDRESS_CONFIGURATION_TABLE *LMFAConfigurationTable;\r
EFI_CPU_ARCH_PROTOCOL *CpuArch;\r
EFI_STATUS SetAttrStatus;\r
+ EFI_SMRAM_DESCRIPTOR *SmramRangeSmmDriver;\r
+ EFI_GCD_MEMORY_SPACE_DESCRIPTOR MemDesc;\r
\r
//\r
- // Fill in the image handle of the SMM IPL so the SMM Core can use this as the \r
- // ParentImageHandle field of the Load Image Protocol for all SMM Drivers loaded \r
+ // Fill in the image handle of the SMM IPL so the SMM Core can use this as the\r
+ // ParentImageHandle field of the Load Image Protocol for all SMM Drivers loaded\r
// by the SMM Core\r
//\r
mSmmCorePrivateData.SmmIplImageHandle = ImageHandle;\r
// Print debug message that the SMRAM window is now open.\r
//\r
DEBUG ((DEBUG_INFO, "SMM IPL opened SMRAM window\n"));\r
- \r
+\r
//\r
// Find the largest SMRAM range between 1MB and 4GB that is at least 256KB - 4K in size\r
//\r
}\r
\r
if (gSmmCorePrivate->SmramRanges[Index].CpuStart >= BASE_1MB) {\r
- if ((gSmmCorePrivate->SmramRanges[Index].CpuStart + gSmmCorePrivate->SmramRanges[Index].PhysicalSize) <= BASE_4GB) {\r
+ if ((gSmmCorePrivate->SmramRanges[Index].CpuStart + gSmmCorePrivate->SmramRanges[Index].PhysicalSize - 1) <= MAX_ADDRESS) {\r
if (gSmmCorePrivate->SmramRanges[Index].PhysicalSize >= MaxSize) {\r
MaxSize = gSmmCorePrivate->SmramRanges[Index].PhysicalSize;\r
mCurrentSmramRange = &gSmmCorePrivate->SmramRanges[Index];\r
//\r
// Print debug message showing SMRAM window that will be used by SMM IPL and SMM Core\r
//\r
- DEBUG ((DEBUG_INFO, "SMM IPL found SMRAM window %p - %p\n", \r
- (VOID *)(UINTN)mCurrentSmramRange->CpuStart, \r
+ DEBUG ((DEBUG_INFO, "SMM IPL found SMRAM window %p - %p\n",\r
+ (VOID *)(UINTN)mCurrentSmramRange->CpuStart,\r
(VOID *)(UINTN)(mCurrentSmramRange->CpuStart + mCurrentSmramRange->PhysicalSize - 1)\r
));\r
\r
GetSmramCacheRange (mCurrentSmramRange, &mSmramCacheBase, &mSmramCacheSize);\r
//\r
- // If CPU AP is present, attempt to set SMRAM cacheability to WB\r
+ // Make sure we can change the desired memory attributes.\r
+ //\r
+ Status = gDS->GetMemorySpaceDescriptor (\r
+ mSmramCacheBase,\r
+ &MemDesc\r
+ );\r
+ ASSERT_EFI_ERROR (Status);\r
+ if ((MemDesc.Capabilities & SMRAM_CAPABILITIES) != SMRAM_CAPABILITIES) {\r
+ gDS->SetMemorySpaceCapabilities (\r
+ mSmramCacheBase,\r
+ mSmramCacheSize,\r
+ MemDesc.Capabilities | SMRAM_CAPABILITIES\r
+ );\r
+ }\r
+ //\r
+ // If CPU AP is present, attempt to set SMRAM cacheability to WB and clear\r
+ // all paging attributes.\r
// Note that it is expected that cacheability of SMRAM has been set to WB if CPU AP\r
// is not available here.\r
//\r
CpuArch = NULL;\r
Status = gBS->LocateProtocol (&gEfiCpuArchProtocolGuid, NULL, (VOID **)&CpuArch);\r
if (!EFI_ERROR (Status)) {\r
- Status = gDS->SetMemorySpaceAttributes(\r
- mSmramCacheBase, \r
+ MemDesc.Attributes &= ~(MEMORY_CACHE_ATTRIBUTES | MEMORY_PAGE_ATTRIBUTES);\r
+ MemDesc.Attributes |= EFI_MEMORY_WB;\r
+ Status = gDS->SetMemorySpaceAttributes (\r
+ mSmramCacheBase,\r
mSmramCacheSize,\r
- EFI_MEMORY_WB\r
+ MemDesc.Attributes\r
);\r
if (EFI_ERROR (Status)) {\r
DEBUG ((DEBUG_WARN, "SMM IPL failed to set SMRAM window to EFI_MEMORY_WB\n"));\r
- } \r
+ }\r
+\r
+ DEBUG_CODE (\r
+ gDS->GetMemorySpaceDescriptor (\r
+ mSmramCacheBase,\r
+ &MemDesc\r
+ );\r
+ DEBUG ((DEBUG_INFO, "SMRAM attributes: %016lx\n", MemDesc.Attributes));\r
+ ASSERT ((MemDesc.Attributes & MEMORY_PAGE_ATTRIBUTES) == 0);\r
+ );\r
}\r
//\r
// if Loading module at Fixed Address feature is enabled, save the SMRAM base to Load\r
//\r
Status = EfiGetSystemConfigurationTable (\r
&gLoadFixedAddressConfigurationTableGuid,\r
- (VOID **) &LMFAConfigurationTable\r
+ (VOID **) &mLMFAConfigurationTable\r
);\r
- if (!EFI_ERROR (Status) && LMFAConfigurationTable != NULL) {\r
- LMFAConfigurationTable->SmramBase = mCurrentSmramRange->CpuStart;\r
+ if (!EFI_ERROR (Status) && mLMFAConfigurationTable != NULL) {\r
+ mLMFAConfigurationTable->SmramBase = mCurrentSmramRange->CpuStart;\r
//\r
// Print the SMRAM base\r
//\r
- DEBUG ((EFI_D_INFO, "LOADING MODULE FIXED INFO: TSEG BASE is %x. \n", LMFAConfigurationTable->SmramBase));\r
+ DEBUG ((EFI_D_INFO, "LOADING MODULE FIXED INFO: TSEG BASE is %x. \n", mLMFAConfigurationTable->SmramBase));\r
}\r
+\r
+ //\r
+ // Fill the Smram range for all SMM code\r
+ //\r
+ SmramRangeSmmDriver = &gSmmCorePrivate->SmramRanges[gSmmCorePrivate->SmramRangeCount - 2];\r
+ SmramRangeSmmDriver->CpuStart = mCurrentSmramRange->CpuStart;\r
+ SmramRangeSmmDriver->PhysicalStart = mCurrentSmramRange->PhysicalStart;\r
+ SmramRangeSmmDriver->RegionState = mCurrentSmramRange->RegionState | EFI_ALLOCATED;\r
+ SmramRangeSmmDriver->PhysicalSize = SmmCodeSize;\r
+\r
+ mCurrentSmramRange->PhysicalSize -= SmmCodeSize;\r
+ mCurrentSmramRange->CpuStart = mCurrentSmramRange->CpuStart + SmmCodeSize;\r
+ mCurrentSmramRange->PhysicalStart = mCurrentSmramRange->PhysicalStart + SmmCodeSize;\r
}\r
//\r
// Load SMM Core into SMRAM and execute it from SMRAM\r
//\r
if (CpuArch != NULL) {\r
SetAttrStatus = gDS->SetMemorySpaceAttributes(\r
- mSmramCacheBase, \r
+ mSmramCacheBase,\r
mSmramCacheSize,\r
EFI_MEMORY_UC\r
);\r
if (EFI_ERROR (SetAttrStatus)) {\r
DEBUG ((DEBUG_WARN, "SMM IPL failed to reset SMRAM window to EFI_MEMORY_UC\n"));\r
- } \r
+ }\r
}\r
}\r
} else {\r
}\r
\r
//\r
- // If the SMM Core could not be loaded then close SMRAM window, free allocated \r
+ // If the SMM Core could not be loaded then close SMRAM window, free allocated\r
// resources, and return an error so SMM IPL will be unloaded.\r
//\r
if (mCurrentSmramRange == NULL || EFI_ERROR (Status)) {\r
\r
return EFI_UNSUPPORTED;\r
}\r
- \r
+\r
//\r
// Install SMM Base2 Protocol and SMM Communication Protocol\r
//\r