#\r
FileExplorerLib|Include/Library/FileExplorerLib.h\r
\r
- ## @libraryclass Provides image decoding service.\r
- #\r
- ImageDecoderLib|Include/Library/ImageDecoderLib.h\r
-\r
## @libraryclass Provides interfaces about logo display.\r
#\r
BootLogoLib|Include/Library/BootLogoLib.h\r
#\r
PciHostBridgeLib|Include/Library/PciHostBridgeLib.h\r
\r
+ ## @libraryclass Provides services to record memory profile of multilevel caller.\r
+ #\r
+ MemoryProfileLib|Include/Library/MemoryProfileLib.h\r
+\r
+ ## @libraryclass Provides an interface for performing UEFI Graphics Output Protocol Video blt operations.\r
+ ##\r
+ FrameBufferBltLib|Include/Library/FrameBufferBltLib.h\r
+\r
[Guids]\r
## MdeModule package token space guid\r
# Include/Guid/MdeModulePkgTokenSpace.h\r
\r
## Include/Guid/MemoryProfile.h\r
gEdkiiMemoryProfileGuid = { 0x821c9a09, 0x541a, 0x40f6, { 0x9f, 0x43, 0xa, 0xd1, 0x93, 0xa1, 0x2c, 0xfe }}\r
+ gEdkiiSmmMemoryProfileGuid = { 0xe22bbcca, 0x516a, 0x46a8, { 0x80, 0xe2, 0x67, 0x45, 0xe8, 0x36, 0x93, 0xbd }}\r
\r
## Include/Protocol/VarErrorFlag.h\r
gEdkiiVarErrorFlagGuid = { 0x4b37fe8, 0xf6ae, 0x480b, { 0xbd, 0xd5, 0x37, 0xd9, 0x8c, 0x5e, 0x89, 0xaa } }\r
## Include/Guid/RamDiskHii.h\r
gRamDiskFormSetGuid = { 0x2a46715f, 0x3581, 0x4a55, { 0x8e, 0x73, 0x2b, 0x76, 0x9a, 0xaa, 0x30, 0xc5 }}\r
\r
+ ## Include/Guid/PiSmmCommunicationRegionTable.h\r
+ gEdkiiPiSmmCommunicationRegionTableGuid = { 0x4e28ca50, 0xd582, 0x44ac, {0xa1, 0x1f, 0xe3, 0xd5, 0x65, 0x26, 0xdb, 0x34}}\r
\r
[Ppis]\r
## Include/Ppi/AtaController.h\r
\r
## Include/Protocol/FormBrowserEx.h\r
gEfiFormBrowserExProtocolGuid = { 0x1f73b18d, 0x4630, 0x43c1, { 0xa1, 0xde, 0x6f, 0x80, 0x85, 0x5d, 0x7d, 0xa4 } }\r
+ gEdkiiFormBrowserExProtocolGuid = { 0x1f73b18d, 0x4630, 0x43c1, { 0xa1, 0xde, 0x6f, 0x80, 0x85, 0x5d, 0x7d, 0xa4 } }\r
\r
## Include/Protocol/EbcVmTest.h\r
gEfiEbcVmTestProtocolGuid = { 0xAAEACCFD, 0xF27B, 0x4C17, { 0xB6, 0x10, 0x75, 0xCA, 0x1F, 0x2D, 0xFB, 0x52 } }\r
gEdkiiSmmReadyToBootProtocolGuid = { 0x6e057ecf, 0xfa99, 0x4f39, { 0x95, 0xbc, 0x59, 0xf9, 0x92, 0x1d, 0x17, 0xe4 } }\r
\r
## Include/Protocol/PlatformLogo.h\r
- gEdkiiPlatformLogoProtocolGuid = { 0x9b517978, 0xeba1, 0x44e7, { 0xba, 0x65, 0x7c, 0x2c, 0xd0, 0x8b, 0xf8, 0xe9 } }\r
+ gEdkiiPlatformLogoProtocolGuid = { 0x53cd299f, 0x2bc1, 0x40c0, { 0x8c, 0x07, 0x23, 0xf6, 0x4f, 0xdb, 0x30, 0xe0 } }\r
\r
## Include/Protocol/FileExplorer.h\r
gEfiFileExplorerProtocolGuid = { 0x2C03C536, 0x4594, 0x4515, { 0x9E, 0x7A, 0xD3, 0xD2, 0x04, 0xFE, 0x13, 0x63 } }\r
gIpmiProtocolGuid = { 0xdbc6381f, 0x5554, 0x4d14, { 0x8f, 0xfd, 0x76, 0xd7, 0x87, 0xb8, 0xac, 0xbf } }\r
gSmmIpmiProtocolGuid = { 0x5169af60, 0x8c5a, 0x4243, { 0xb3, 0xe9, 0x56, 0xc5, 0x6d, 0x18, 0xee, 0x26 } }\r
\r
+ ## PS/2 policy protocol abstracts the specific platform initialization and setting.\r
+ # Include/Protocol/Ps2Policy.h\r
+ gEfiPs2PolicyProtocolGuid = { 0x4DF19259, 0xDC71, 0x4D46, { 0xBE, 0xF1, 0x35, 0x7B, 0xB5, 0x78, 0xC4, 0x18 } }\r
+\r
#\r
# [Error.gEfiMdeModulePkgTokenSpaceGuid]\r
# 0x80000001 | Invalid value provided.\r
# @Prompt Enable S3 performance data support.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdFirmwarePerformanceDataTableS3Support|TRUE|BOOLEAN|0x00010064\r
\r
+ ## Indicates if PS2 keyboard does a extended verification during start.\r
+ # Add this PCD mainly consider the use case of simulator. This PCD maybe set to FALSE for\r
+ # Extended verification will take some performance. It can be set to FALSE for boot performance.<BR><BR>\r
+ # TRUE - Turn on PS2 keyboard extended verification.<BR>\r
+ # FALSE - Turn off PS2 keyboard extended verification.<BR>\r
+ # @Prompt Turn on PS2 Keyboard Extended Verification\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdPs2KbdExtendedVerification|TRUE|BOOLEAN|0x00010072\r
+\r
## Indicates if Serial device uses half hand shake.<BR><BR>\r
# TRUE - Serial device uses half hand shake.<BR>\r
# FALSE - Serial device doesn't use half hand shake.<BR>\r
# @Prompt Enable export HII data and configuration to be used in OS runtime.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdHiiOsRuntimeSupport|TRUE|BOOLEAN|0x00010074\r
\r
+ ## Indicates if PS2 mouse does a extended verification during start.\r
+ # Extended verification will take some performance. It can be set to FALSE for boot performance.<BR><BR>\r
+ # TRUE - Turn on PS2 mouse extended verification. <BR>\r
+ # FALSE - Turn off PS2 mouse extended verification. <BR>\r
+ # @Prompt Turn on PS2 Mouse Extended Verification\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdPs2MouseExtendedVerification|TRUE|BOOLEAN|0x00010075\r
+\r
+ ## Indicates whether 64-bit PCI MMIO BARs should degrade to 32-bit in the presence of an option ROM\r
+ # On X64 platforms, Option ROMs may contain code that executes in the context of a legacy BIOS (CSM),\r
+ # which requires that all PCI MMIO BARs are located below 4 GB\r
+ # TRUE - All PCI MMIO BARs of a device will be located below 4 GB if it has an option ROM\r
+ # FALSE - PCI MMIO BARs of a device may be located above 4 GB even if it has an option ROM\r
+ # @Prompt Degrade 64-bit PCI MMIO BARs for legacy BIOS option ROMs\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdPciDegradeResourceForOptionRom|TRUE|BOOLEAN|0x0001003a\r
+\r
+[PcdsFeatureFlag.IA32, PcdsFeatureFlag.ARM, PcdsFeatureFlag.AARCH64]\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdPciDegradeResourceForOptionRom|FALSE|BOOLEAN|0x0001003a\r
+\r
[PcdsFeatureFlag.IA32, PcdsFeatureFlag.X64]\r
## Indicates if DxeIpl should switch to long mode to enter DXE phase.\r
# It is assumed that 64-bit DxeCore is built in firmware if it is true; otherwise 32-bit DxeCore\r
## The mask is used to control memory profile behavior.<BR><BR>\r
# BIT0 - Enable UEFI memory profile.<BR>\r
# BIT1 - Enable SMRAM profile.<BR>\r
+ # BIT7 - Disable recording at the start.<BR>\r
# @Prompt Memory Profile Property.\r
- # @Expression 0x80000002 | (gEfiMdeModulePkgTokenSpaceGuid.PcdMemoryProfilePropertyMask & 0xFC) == 0\r
+ # @Expression 0x80000002 | (gEfiMdeModulePkgTokenSpaceGuid.PcdMemoryProfilePropertyMask & 0x7C) == 0\r
gEfiMdeModulePkgTokenSpaceGuid.PcdMemoryProfilePropertyMask|0x0|UINT8|0x30001041\r
\r
## This flag is to control which memory types of alloc info will be recorded by DxeCore & SmmCore.<BR><BR>\r
# @Prompt Memory profile memory type.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdMemoryProfileMemoryType|0x0|UINT64|0x30001042\r
\r
+ ## This PCD is to control which drivers need memory profile data.<BR><BR>\r
+ # For example:<BR>\r
+ # One image only (Shell):<BR>\r
+ # Header GUID<BR>\r
+ # {0x04, 0x06, 0x14, 0x00, 0x83, 0xA5, 0x04, 0x7C, 0x3E, 0x9E, 0x1C, 0x4F, 0xAD, 0x65, 0xE0, 0x52, 0x68, 0xD0, 0xB4, 0xD1,<BR>\r
+ # 0x7F, 0xFF, 0x04, 0x00}<BR>\r
+ # Two or more images (Shell + WinNtSimpleFileSystem):<BR>\r
+ # {0x04, 0x06, 0x14, 0x00, 0x83, 0xA5, 0x04, 0x7C, 0x3E, 0x9E, 0x1C, 0x4F, 0xAD, 0x65, 0xE0, 0x52, 0x68, 0xD0, 0xB4, 0xD1,<BR>\r
+ # 0x7F, 0x01, 0x04, 0x00,<BR>\r
+ # 0x04, 0x06, 0x14, 0x00, 0x8B, 0xE1, 0x25, 0x9C, 0xBA, 0x76, 0xDA, 0x43, 0xA1, 0x32, 0xDB, 0xB0, 0x99, 0x7C, 0xEF, 0xEF,<BR>\r
+ # 0x7F, 0xFF, 0x04, 0x00}<BR>\r
+ # @Prompt Memory profile driver path.\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdMemoryProfileDriverPath|{0x0}|VOID*|0x00001043\r
+\r
## PCI Serial Device Info. It is an array of Device, Function, and Power Management\r
# information that describes the path that contains zero or more PCI to PCI briges\r
# followed by a PCI serial device. Each array entry is 4-bytes in length. The\r
# @Prompt Exposed ACPI table versions.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiExposedTableVersions|0x3E|UINT32|0x0001004c\r
\r
+ ## This PCD defines the MAX repair count.\r
+ # The default value is 0 that means infinite.\r
+ # @Prompt MAX repair count\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdMaxRepairCount|0x00|UINT32|0x00010076\r
+\r
[PcdsPatchableInModule, PcdsDynamic, PcdsDynamicEx]\r
## This PCD defines the Console output row. The default value is 25 according to UEFI spec.\r
# This PCD could be set to 0 then console output would be at max column and max row.\r
# @Prompt ACPI S3 Enable.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiS3Enable|TRUE|BOOLEAN|0x01100000\r
\r
+ ## Specify memory size for boot script executor stack usage in S3 phase.\r
+ # The default size 32K. When changing the value make sure the memory size is large enough \r
+ # to meet boot script executor requirement in the S3 phase.\r
+ # @Prompt Reserved S3 Boot Script Stack ACPI Memory Size\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdS3BootScriptStackSize|0x8000|UINT32|0x02000000\r
+\r
+ ## Indicates if to use the optimized timing for best PS2 detection performance.\r
+ # Note this PCD could be set to TRUE for best boot performance and set to FALSE for best device compatibility.<BR><BR>\r
+ # TRUE - Use the optimized timing for best PS2 detection performance.<BR>\r
+ # FALSE - Use the normal timing to detect PS2.<BR>\r
+ # @Prompt Enable fast PS2 detection\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdFastPS2Detection|FALSE|BOOLEAN|0x30001044\r
+\r
+ ## This is recover file name in PEI phase.\r
+ # The file must be in the root directory.\r
+ # The file name must be the 8.3 format.\r
+ # The PCD data must be in UNICODE format.\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdRecoveryFileName|L"FVMAIN.FV"|VOID*|0x30001045\r
+\r
[PcdsPatchableInModule]\r
## Specify memory size with page number for PEI code when\r
# Loading Module at Fixed Address feature is enabled.\r
projects / mirror_edk2.git / blobdiff