+++ /dev/null
-## @file\r
-# FDF file of Clanton Peak CRB platform with 32-bit DXE\r
-#\r
-# This package provides QuarkNcSocId platform specific modules.\r
-# Copyright (c) 2013 - 2018 Intel Corporation.\r
-#\r
-# SPDX-License-Identifier: BSD-2-Clause-Patent\r
-#\r
-##\r
-\r
-################################################################################\r
-#\r
-# Defines Section - statements that will be processed to create a Makefile.\r
-#\r
-################################################################################\r
-[Defines]\r
-# Address 0x100000000 (4 GB reset address)\r
-# Base Size\r
-# +---------------------------+\r
-# FLASH_BASE | FD.Quark: | 0x800000 (8 MB)\r
-# 0xFF800000 | BaseAddress |\r
-# +---------------------------+\r
-#\r
-# Flash offsets are 0 based, but are relative to FD.Quark BaseAddress, e.g. Payload Base is at 0x400000, Flash Base is at 0xFF800000 for 8 MB SPI part.\r
-# 0xFF800000 + 0x400000 = 0xFFC00000.\r
-#\r
-# Address 0x0 (0xFF800000 for 8 MB SPI part)\r
-# +---------------------------+\r
-# FLASH_FV_PAYLOAD_BASE | Payload Image | FLASH_FV_PAYLOAD_SIZE\r
-# 0x00400000 | | 0x00100000\r
-# +---------------------------+\r
-# FLASH_FV_MAIN_BASE | FvMain Image (Compressed) | FLASH_FV_MAIN_SIZE\r
-# 0x00500000 | | 0x001E0000\r
-# +---------------------------+\r
-# NVRAM_AREA_BASE | NVRAM Area= | NVRAM_AREA_SIZE\r
-# 0x006E0000 | Variable + FTW Working + |\r
-# | FTW Spare |\r
-# +---+-------------------+---+\r
-# NVRAM_AREA_VARIABLE_BASE | | NVRAM_AREA_VARIABLE_SIZE\r
-# | |\r
-# +-------------------+\r
-# FTW_WORKING_BASE | | FTW_WORKING_SIZE\r
-# | |\r
-# +-------------------+\r
-# FTW_SPARE_BASE | | FTW_SPARE_SIZE\r
-# | |\r
-# +---+-------------------+---+\r
-# RMU_BINARY_BASE | RMU Binary | RMU_BINARY_SIZE\r
-# 0x00700000 | | 0x00008000\r
-# +---------------------------+\r
-# PLATFORM_DATA_BASE | PlatformData Binary | PLATFORM_DATA_SIZE\r
-# 0x00710000 | | 0x00001000\r
-# +---------------------------+\r
-# FVRECOVERY_IMAGE_BASE | FVRECOVERY Image | FVRECOVERY_IMAGE_SIZE\r
-# 0x720000 | | 0x000E0000\r
-# +---------------------------+\r
-\r
- #\r
- # Define value used to compute FLASH regions below reset vector location just below 4GB\r
- #\r
- DEFINE RESET_ADDRESS = 0x100000000 # 4 GB\r
-\r
- #\r
- # Set size of FLASH to 8MB\r
- #\r
- DEFINE FLASH_SIZE = 0x800000\r
- DEFINE FLASH_BASE = $(RESET_ADDRESS) - $(FLASH_SIZE) # The base address of the Flash Device\r
-\r
- #\r
- # Set FLASH block size to 4KB\r
- #\r
- DEFINE FLASH_BLOCKSIZE = 0x1000 # 4 KB\r
-\r
- #\r
- # Misc settings\r
- #\r
- DEFINE FLASH_BLOCKSIZE_DATA = 0x00, 0x10, 0x00, 0x00 # equivalent for DATA blocks\r
-\r
- #\r
- # Start PAYLOAD at 4MB into 8MB FLASH\r
- #\r
- DEFINE FLASH_FV_PAYLOAD_BASE = 0x00400000\r
- DEFINE FLASH_FV_PAYLOAD_SIZE = 0x00100000\r
-\r
- #\r
- # Put FVMAIN between PAYLOAD and RMU Binary\r
- #\r
- DEFINE FLASH_FV_MAIN_BASE = 0x00500000\r
- DEFINE FLASH_FV_MAIN_SIZE = 0x001E0000\r
-\r
- #\r
- # Place NV Storage just above Platform Data Base\r
- #\r
- DEFINE NVRAM_AREA_VARIABLE_BASE = 0x006E0000\r
- DEFINE NVRAM_AREA_SIZE = 0x00020000\r
-\r
- DEFINE NVRAM_AREA_VARIABLE_SIZE = 0x0000E000\r
- DEFINE FTW_WORKING_BASE = $(NVRAM_AREA_VARIABLE_BASE) + $(NVRAM_AREA_VARIABLE_SIZE)\r
- DEFINE FTW_WORKING_SIZE = 0x00002000\r
- DEFINE FTW_SPARE_BASE = $(FTW_WORKING_BASE) + $(FTW_WORKING_SIZE)\r
- DEFINE FTW_SPARE_SIZE = $(NVRAM_AREA_SIZE) - $(NVRAM_AREA_VARIABLE_SIZE) - $(FTW_WORKING_SIZE)\r
-\r
- #\r
- # RMU Binary must be at fixed address 1MB below 4GB (0xFFF00000)\r
- #\r
- DEFINE RMU_BINARY_BASE = 0x00700000 # HW fixed address\r
- DEFINE RMU_BINARY_SIZE = 0x00008000 # HW fixed address, so fixed size\r
-\r
- #\r
- # Platform Data Base must be 64KB above RMU\r
- #\r
- DEFINE VPD_BASE = 0x00708000\r
- DEFINE VPD_SIZE = 0x00001000\r
-\r
- #\r
- # Place FV Recovery above NV Storage\r
- #\r
- DEFINE FVRECOVERY_IMAGE_SIZE = 0x000F0000\r
- DEFINE FVRECOVERY_IMAGE_BASE = $(FLASH_SIZE) - $(FVRECOVERY_IMAGE_SIZE)\r
-\r
-################################################################################\r
-#\r
-# FD Section\r
-# The [FD] Section is made up of the definition statements and a\r
-# description of what goes into the Flash Device Image. Each FD section\r
-# defines one flash "device" image. A flash device image may be one of\r
-# the following: Removable media bootable image (like a boot floppy\r
-# image,) an Option ROM image (that would be "flashed" into an add-in\r
-# card,) a System "Flash" image (that would be burned into a system's\r
-# flash) or an Update ("Capsule") image that will be used to update and\r
-# existing system flash.\r
-#\r
-################################################################################\r
-[FD.Quark]\r
-BaseAddress = 0xFF800000 #The base address of the Flash Device; set to same value as FLASH_BASE.\r
-Size = 0x800000 #The size in bytes of the Flash Device; set to same value as FLASH_SIZE.\r
-ErasePolarity = 1\r
-BlockSize = $(FLASH_BLOCKSIZE)\r
-NumBlocks = 0x800 #The number of blocks for the Flash Device.\r
-\r
-SET gQuarkPlatformTokenSpaceGuid.PcdFlashAreaBaseAddress = $(FLASH_BASE)\r
-SET gQuarkPlatformTokenSpaceGuid.PcdFlashAreaSize = $(FLASH_SIZE)\r
-\r
-################################################################################\r
-#\r
-# Following are lists of FD Region layout which correspond to the locations of different\r
-# images within the flash device.\r
-#\r
-# Regions must be defined in ascending order and may not overlap.\r
-#\r
-# A Layout Region start with a eight digit hex offset (leading "0x" required) followed by\r
-# the pipe "|" character, followed by the size of the region, also in hex with the leading\r
-# "0x" characters. Like:\r
-# Offset|Size\r
-# PcdOffsetCName|PcdSizeCName\r
-# RegionType <FV, DATA, or FILE>\r
-#\r
-################################################################################\r
-\r
-########################################################\r
-# Quark Payload Image\r
-########################################################\r
-$(FLASH_FV_PAYLOAD_BASE)|$(FLASH_FV_PAYLOAD_SIZE)\r
-gQuarkPlatformTokenSpaceGuid.PcdFlashFvPayloadBase|gQuarkPlatformTokenSpaceGuid.PcdFlashFvPayloadSize\r
-FV = PAYLOAD\r
-\r
-########################################################\r
-# Quark FVMAIN Image (Compressed)\r
-########################################################\r
-$(FLASH_FV_MAIN_BASE)|$(FLASH_FV_MAIN_SIZE)\r
-gQuarkPlatformTokenSpaceGuid.PcdFlashFvMainBase|gQuarkPlatformTokenSpaceGuid.PcdFlashFvMainSize\r
-FV = FVMAIN_COMPACT\r
-\r
-#############################################################################\r
-# Quark NVRAM Area\r
-# Quark NVRAM Area contains: Variable + FTW Working + FTW Spare\r
-#############################################################################\r
-$(NVRAM_AREA_VARIABLE_BASE)|$(NVRAM_AREA_VARIABLE_SIZE)\r
-gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableBase|gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableSize\r
-#NV_VARIABLE_STORE\r
-DATA = {\r
- ## This is the EFI_FIRMWARE_VOLUME_HEADER\r
- # ZeroVector []\r
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,\r
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,\r
- # FileSystemGuid: gEfiSystemNvDataFvGuid =\r
- # { 0xFFF12B8D, 0x7696, 0x4C8B, { 0xA9, 0x85, 0x27, 0x47, 0x07, 0x5B, 0x4F, 0x50 }}\r
- 0x8D, 0x2B, 0xF1, 0xFF, 0x96, 0x76, 0x8B, 0x4C,\r
- 0xA9, 0x85, 0x27, 0x47, 0x07, 0x5B, 0x4F, 0x50,\r
- # FvLength: 0x20000\r
- 0x00, 0x00, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00,\r
- #Signature "_FVH" #Attributes\r
- 0x5f, 0x46, 0x56, 0x48, 0xff, 0xfe, 0x04, 0x00,\r
- #HeaderLength #CheckSum #ExtHeaderOffset #Reserved #Revision\r
- 0x48, 0x00, 0x19, 0xF9, 0x00, 0x00, 0x00, 0x02,\r
- #Blockmap[0]: 32 Blocks * 0x1000 Bytes / Block\r
- 0x20, 0x00, 0x00, 0x00, $(FLASH_BLOCKSIZE_DATA),\r
- #Blockmap[1]: End\r
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,\r
- ## This is the VARIABLE_STORE_HEADER\r
- !if $(SECURE_BOOT_ENABLE)\r
- # Signature: gEfiAuthenticatedVariableGuid = { 0xaaf32c78, 0x947b, 0x439a, { 0xa1, 0x80, 0x2e, 0x14, 0x4e, 0xc3, 0x77, 0x92 } }\r
- 0x78, 0x2c, 0xf3, 0xaa, 0x7b, 0x94, 0x9a, 0x43,\r
- 0xa1, 0x80, 0x2e, 0x14, 0x4e, 0xc3, 0x77, 0x92,\r
- !else\r
- # Signature: gEfiVariableGuid = { 0xddcf3616, 0x3275, 0x4164, { 0x98, 0xb6, 0xfe, 0x85, 0x70, 0x7f, 0xfe, 0x7d }}\r
- 0x16, 0x36, 0xcf, 0xdd, 0x75, 0x32, 0x64, 0x41,\r
- 0x98, 0xb6, 0xfe, 0x85, 0x70, 0x7f, 0xfe, 0x7d,\r
- !endif\r
- #Size: 0x0E000 (gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableSize) - 0x48 (size of EFI_FIRMWARE_VOLUME_HEADER) = 0x0DFB8\r
- # This can speed up the Variable Dispatch a bit.\r
- 0xB8, 0xDF, 0x00, 0x00,\r
- #FORMATTED: 0x5A #HEALTHY: 0xFE #Reserved: UINT16 #Reserved1: UINT32\r
- 0x5A, 0xFE, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00\r
-}\r
-\r
-$(FTW_WORKING_BASE)|$(FTW_WORKING_SIZE)\r
-gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingBase|gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingSize\r
-#NV_FTW_WORKING\r
-DATA = {\r
- # EFI_FAULT_TOLERANT_WORKING_BLOCK_HEADER->Signature = gEdkiiWorkingBlockSignatureGuid =\r
- # { 0x9e58292b, 0x7c68, 0x497d, { 0xa0, 0xce, 0x65, 0x0, 0xfd, 0x9f, 0x1b, 0x95 }}\r
- 0x2b, 0x29, 0x58, 0x9e, 0x68, 0x7c, 0x7d, 0x49,\r
- 0xa0, 0xce, 0x65, 0x0, 0xfd, 0x9f, 0x1b, 0x95,\r
- # Crc:UINT32 #WorkingBlockValid:1, WorkingBlockInvalid:1, Reserved\r
- 0xE2, 0x33, 0xF2, 0x03, 0xFE, 0xFF, 0xFF, 0xFF,\r
- # WriteQueueSize: UINT64 #Size: 0x2000 - 0x20 (FTW_WORKING_HEADER) = 0x1FE0\r
- 0xE0, 0x1F, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00\r
-}\r
-\r
-$(FTW_SPARE_BASE)|$(FTW_SPARE_SIZE)\r
-gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareBase|gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareSize\r
-#NV_FTW_SPARE\r
-\r
-#########################################################\r
-# Quark Remote Management Unit Binary\r
-#########################################################\r
-$(RMU_BINARY_BASE)|$(RMU_BINARY_SIZE)\r
-INF QuarkSocBinPkg/QuarkNorthCluster/Binary/QuarkMicrocode/QuarkMicrocode.inf\r
-\r
-#########################################################\r
-# PlatformData Binary, default for standalone is none built-in so user selects.\r
-#########################################################\r
-$(VPD_BASE)|$(VPD_SIZE)\r
-gEfiMdeModulePkgTokenSpaceGuid.PcdVpdBaseAddress\r
-FILE = $(OUTPUT_DIRECTORY)/$(TARGET)_$(TOOL_CHAIN_TAG)/FV/8C3D856A-9BE6-468E-850A-24F7A8D38E08.bin\r
-\r
-#######################\r
-# Quark FVRECOVERY Image\r
-#######################\r
-$(FVRECOVERY_IMAGE_BASE)|$(FVRECOVERY_IMAGE_SIZE)\r
-gQuarkPlatformTokenSpaceGuid.PcdFlashFvRecoveryBase|gQuarkPlatformTokenSpaceGuid.PcdFlashFvRecoverySize\r
-FV = FVRECOVERY\r
-\r
-################################################################################\r
-#\r
-# FV Section\r
-#\r
-# [FV] section is used to define what components or modules are placed within a flash\r
-# device file. This section also defines order the components and modules are positioned\r
-# within the image. The [FV] section consists of define statements, set statements and\r
-# module statements.\r
-#\r
-################################################################################\r
-[FV.FVRECOVERY]\r
-BlockSize = $(FLASH_BLOCKSIZE)\r
-FvAlignment = 16 #FV alignment and FV attributes setting.\r
-ERASE_POLARITY = 1\r
-MEMORY_MAPPED = TRUE\r
-STICKY_WRITE = TRUE\r
-LOCK_CAP = TRUE\r
-LOCK_STATUS = TRUE\r
-WRITE_DISABLED_CAP = TRUE\r
-WRITE_ENABLED_CAP = TRUE\r
-WRITE_STATUS = TRUE\r
-WRITE_LOCK_CAP = TRUE\r
-WRITE_LOCK_STATUS = TRUE\r
-READ_DISABLED_CAP = TRUE\r
-READ_ENABLED_CAP = TRUE\r
-READ_STATUS = TRUE\r
-READ_LOCK_CAP = TRUE\r
-READ_LOCK_STATUS = TRUE\r
-FvNameGuid = 18D6D9F4-2EEF-4913-AEE6-BE61C6DA6CC8\r
-\r
-################################################################################\r
-#\r
-# The INF statements point to EDK component and EDK II module INF files, which will be placed into this FV image.\r
-# Parsing tools will scan the INF file to determine the type of component or module.\r
-# The component or module type is used to reference the standard rules\r
-# defined elsewhere in the FDF file.\r
-#\r
-# The format for INF statements is:\r
-# INF $(PathAndInfFileName)\r
-#\r
-################################################################################\r
-\r
-##\r
-# PEI Apriori file example, more PEIM module added later.\r
-##\r
-APRIORI PEI {\r
- INF MdeModulePkg/Universal/PCD/Pei/Pcd.inf\r
- # PlatformConfigPei should be immediately after Pcd driver.\r
- INF QuarkPlatformPkg/Platform/Pei/PlatformConfig/PlatformConfigPei.inf\r
- INF MdeModulePkg/Universal/PcatSingleSegmentPciCfg2Pei/PcatSingleSegmentPciCfg2Pei.inf\r
- INF MdeModulePkg/Universal/ReportStatusCodeRouter/Pei/ReportStatusCodeRouterPei.inf\r
- INF MdeModulePkg/Universal/StatusCodeHandler/Pei/StatusCodeHandlerPei.inf\r
-}\r
-\r
-##\r
-# SEC Phase modules\r
-##\r
-INF UefiCpuPkg/SecCore/SecCore.inf\r
-\r
-!if $(CAPSULE_ENABLE) || $(RECOVERY_ENABLE)\r
- # FMP image decriptor\r
-INF RuleOverride = FMP_IMAGE_DESC QuarkPlatformPkg/Feature/Capsule/SystemFirmwareDescriptor/SystemFirmwareDescriptor.inf\r
-!endif\r
-\r
-INF MdeModulePkg/Core/Pei/PeiMain.inf\r
-\r
-##\r
-# PEI Phase RAW Data files.\r
-##\r
-FILE FREEFORM = PCD(gEfiQuarkNcSocIdTokenSpaceGuid.PcdQuarkMicrocodeFile) {\r
- SECTION RAW = QuarkSocBinPkg/QuarkNorthCluster/Binary/QuarkMicrocode/RMU.bin\r
-}\r
-\r
-INF RuleOverride = NORELOC MdeModulePkg/Universal/PCD/Pei/Pcd.inf\r
-INF QuarkPlatformPkg/Platform/Pei/PlatformConfig/PlatformConfigPei.inf\r
-INF RuleOverride = NORELOC MdeModulePkg/Universal/ReportStatusCodeRouter/Pei/ReportStatusCodeRouterPei.inf\r
-INF RuleOverride = NORELOC MdeModulePkg/Universal/StatusCodeHandler/Pei/StatusCodeHandlerPei.inf\r
-INF RuleOverride = NORELOC MdeModulePkg/Universal/FaultTolerantWritePei/FaultTolerantWritePei.inf\r
-INF RuleOverride = NORELOC MdeModulePkg/Universal/Variable/Pei/VariablePei.inf\r
-INF RuleOverride = NORELOC UefiCpuPkg/CpuMpPei/CpuMpPei.inf\r
-INF RuleOverride = NORELOC MdeModulePkg/Universal/CapsulePei/CapsulePei.inf\r
-INF RuleOverride = NORELOC QuarkSocPkg/QuarkNorthCluster/MemoryInit/Pei/MemoryInitPei.inf\r
-INF RuleOverride = NORELOC QuarkSocPkg/QuarkNorthCluster/Smm/Pei/SmmAccessPei/SmmAccessPei.inf\r
-INF RuleOverride = NORELOC QuarkSocPkg/QuarkNorthCluster/Smm/Pei/SmmControlPei/SmmControlPei.inf\r
-INF QuarkPlatformPkg/Platform/Pei/PlatformInit/PlatformEarlyInit.inf\r
-INF MdeModulePkg/Universal/PcatSingleSegmentPciCfg2Pei/PcatSingleSegmentPciCfg2Pei.inf\r
-INF MdeModulePkg/Core/DxeIplPeim/DxeIpl.inf\r
-INF UefiCpuPkg/PiSmmCommunication/PiSmmCommunicationPei.inf\r
-INF UefiCpuPkg/Universal/Acpi/S3Resume2Pei/S3Resume2Pei.inf\r
-!if $(MEASURED_BOOT_ENABLE)\r
-INF SecurityPkg/Tcg/Tcg2Config/Tcg2ConfigPei.inf\r
-INF SecurityPkg/Tcg/TcgPei/TcgPei.inf\r
-!endif\r
-\r
-!if $(RECOVERY_ENABLE)\r
-FILE FV_IMAGE = 1E9D7604-EF45-46a0-BD8A-71AC78C17AC1 {\r
- SECTION PEI_DEPEX_EXP = {gEfiPeiMemoryDiscoveredPpiGuid AND gEfiPeiBootInRecoveryModePpiGuid}\r
- SECTION GUIDED A31280AD-481E-41B6-95E8-127F4C984779 { # TIANO COMPRESS GUID\r
- SECTION FV_IMAGE = FVRECOVERY_COMPONENTS\r
- }\r
-}\r
-!endif\r
-\r
-!if $(RECOVERY_ENABLE)\r
-\r
-################################################################################\r
-#\r
-# FV Section\r
-#\r
-# [FV] section is used to define what components or modules are placed within a flash\r
-# device file. This section also defines order the components and modules are positioned\r
-# within the image. The [FV] section consists of define statements, set statements and\r
-# module statements.\r
-#\r
-################################################################################\r
-[FV.FVRECOVERY_COMPONENTS]\r
-BlockSize = $(FLASH_BLOCKSIZE)\r
-FvAlignment = 16 #FV alignment and FV attributes setting.\r
-ERASE_POLARITY = 1\r
-MEMORY_MAPPED = TRUE\r
-STICKY_WRITE = TRUE\r
-LOCK_CAP = TRUE\r
-LOCK_STATUS = TRUE\r
-WRITE_DISABLED_CAP = TRUE\r
-WRITE_ENABLED_CAP = TRUE\r
-WRITE_STATUS = TRUE\r
-WRITE_LOCK_CAP = TRUE\r
-WRITE_LOCK_STATUS = TRUE\r
-READ_DISABLED_CAP = TRUE\r
-READ_ENABLED_CAP = TRUE\r
-READ_STATUS = TRUE\r
-READ_LOCK_CAP = TRUE\r
-READ_LOCK_STATUS = TRUE\r
-\r
-INF QuarkSocPkg/QuarkSouthCluster/Usb/Common/Pei/UsbPei.inf\r
-INF MdeModulePkg/Bus/Pci/EhciPei/EhciPei.inf\r
-INF QuarkSocPkg/QuarkSouthCluster/Usb/Ohci/Pei/OhciPei.inf\r
-INF MdeModulePkg/Bus/Usb/UsbBusPei/UsbBusPei.inf\r
-INF MdeModulePkg/Bus/Usb/UsbBotPei/UsbBotPei.inf\r
-INF FatPkg/FatPei/FatPei.inf\r
-INF MdeModulePkg/Universal/Disk/CdExpressPei/CdExpressPei.inf\r
-INF SignedCapsulePkg/Universal/RecoveryModuleLoadPei/RecoveryModuleLoadPei.inf\r
-\r
-!endif\r
-\r
-################################################################################\r
-#\r
-# FV Section\r
-#\r
-# [FV] section is used to define what components or modules are placed within a flash\r
-# device file. This section also defines order the components and modules are positioned\r
-# within the image. The [FV] section consists of define statements, set statements and\r
-# module statements.\r
-#\r
-################################################################################\r
-[FV.FVMAIN]\r
-BlockSize = $(FLASH_BLOCKSIZE)\r
-FvAlignment = 16\r
-ERASE_POLARITY = 1\r
-MEMORY_MAPPED = TRUE\r
-STICKY_WRITE = TRUE\r
-LOCK_CAP = TRUE\r
-LOCK_STATUS = TRUE\r
-WRITE_DISABLED_CAP = TRUE\r
-WRITE_ENABLED_CAP = TRUE\r
-WRITE_STATUS = TRUE\r
-WRITE_LOCK_CAP = TRUE\r
-WRITE_LOCK_STATUS = TRUE\r
-READ_DISABLED_CAP = TRUE\r
-READ_ENABLED_CAP = TRUE\r
-READ_STATUS = TRUE\r
-READ_LOCK_CAP = TRUE\r
-READ_LOCK_STATUS = TRUE\r
-FvNameGuid = 30D9ED01-38D2-418a-90D5-C561750BF80F\r
-\r
-##\r
-# DXE Phase modules\r
-##\r
-INF MdeModulePkg/Core/Dxe/DxeMain.inf\r
-INF MdeModulePkg/Universal/PCD/Dxe/Pcd.inf\r
-\r
-!if $(SOURCE_DEBUG_ENABLE)\r
- INF SourceLevelDebugPkg/DebugAgentDxe/DebugAgentDxe.inf\r
-!endif\r
-\r
-#\r
-# Early SoC / Platform modules\r
-#\r
-INF QuarkPlatformPkg/Platform/Dxe/PlatformInit/PlatformInitDxe.inf\r
-\r
-##\r
-# EDK Core modules\r
-##\r
-INF UefiCpuPkg/CpuIo2Dxe/CpuIo2Dxe.inf\r
-INF MdeModulePkg/Universal/ReportStatusCodeRouter/RuntimeDxe/ReportStatusCodeRouterRuntimeDxe.inf\r
-INF MdeModulePkg/Universal/StatusCodeHandler/RuntimeDxe/StatusCodeHandlerRuntimeDxe.inf\r
-INF MdeModulePkg/Universal/ReportStatusCodeRouter/Smm/ReportStatusCodeRouterSmm.inf\r
-INF MdeModulePkg/Universal/StatusCodeHandler/Smm/StatusCodeHandlerSmm.inf\r
-INF MdeModulePkg/Universal/SectionExtractionDxe/SectionExtractionDxe.inf\r
-\r
-INF MdeModulePkg/Universal/SecurityStubDxe/SecurityStubDxe.inf\r
-INF UefiCpuPkg/CpuDxe/CpuDxe.inf\r
-INF MdeModulePkg/Universal/Metronome/Metronome.inf\r
-INF MdeModulePkg/Universal/WatchdogTimerDxe/WatchdogTimer.inf\r
-INF MdeModulePkg/Core/RuntimeDxe/RuntimeDxe.inf\r
-INF MdeModulePkg/Universal/FaultTolerantWriteDxe/FaultTolerantWriteSmm.inf\r
-!if $(SECURE_BOOT_ENABLE)\r
- INF SecurityPkg/VariableAuthenticated/SecureBootConfigDxe/SecureBootConfigDxe.inf\r
-!endif\r
-INF MdeModulePkg/Universal/Variable/RuntimeDxe/VariableSmmRuntimeDxe.inf\r
-INF MdeModulePkg/Universal/Variable/RuntimeDxe/VariableSmm.inf\r
-INF MdeModulePkg/Universal/CapsuleRuntimeDxe/CapsuleRuntimeDxe.inf\r
-INF MdeModulePkg/Universal/MonotonicCounterRuntimeDxe/MonotonicCounterRuntimeDxe.inf\r
-INF MdeModulePkg/Universal/ResetSystemRuntimeDxe/ResetSystemRuntimeDxe.inf\r
-INF PcAtChipsetPkg/PcatRealTimeClockRuntimeDxe/PcatRealTimeClockRuntimeDxe.inf\r
-INF MdeModulePkg/Universal/DevicePathDxe/DevicePathDxe.inf\r
-INF MdeModulePkg/Universal/MemoryTest/NullMemoryTestDxe/NullMemoryTestDxe.inf\r
-\r
-#\r
-# Platform\r
-#\r
-INF MdeModulePkg/Universal/BdsDxe/BdsDxe.inf\r
-INF MdeModulePkg/Application/UiApp/UiApp.inf\r
-\r
-INF QuarkPlatformPkg/Pci/Dxe/PciHostBridge/PciHostBridge.inf\r
-INF QuarkPlatformPkg/Platform/SpiFvbServices/PlatformSpi.inf\r
-INF QuarkPlatformPkg/Platform/SpiFvbServices/PlatformSmmSpi.inf\r
-INF QuarkSocPkg/QuarkNorthCluster/QNCInit/Dxe/QNCInitDxe.inf\r
-INF PcAtChipsetPkg/HpetTimerDxe/HpetTimerDxe.inf\r
-INF QuarkSocPkg/QuarkNorthCluster/Smm/Dxe/SmmAccessDxe/SmmAccess.inf\r
-INF QuarkSocPkg/QuarkNorthCluster/S3Support/Dxe/QncS3Support.inf\r
-INF QuarkSocPkg/QuarkNorthCluster/Spi/PchSpiRuntime.inf\r
-INF QuarkSocPkg/QuarkNorthCluster/Spi/PchSpiSmm.inf\r
-INF QuarkPlatformPkg/Platform/Dxe/Setup/DxePlatform.inf\r
-\r
-#\r
-# ACPI\r
-#\r
-INF QuarkPlatformPkg/Platform/Dxe/SaveMemoryConfig/SaveMemoryConfig.inf\r
-INF MdeModulePkg/Universal/Acpi/S3SaveStateDxe/S3SaveStateDxe.inf\r
-#INF MdeModulePkg/Universal/Acpi/BootScriptExecutorDxe/BootScriptExecutorDxe.inf\r
-INF QuarkPlatformPkg/Acpi/Dxe/BootScriptExecutorDxe/BootScriptExecutorDxe.inf\r
-INF MdeModulePkg/Universal/Acpi/AcpiTableDxe/AcpiTableDxe.inf\r
-INF IntelFrameworkModulePkg/Universal/Acpi/AcpiS3SaveDxe/AcpiS3SaveDxe.inf\r
-INF QuarkPlatformPkg/Acpi/Dxe/AcpiPlatform/AcpiPlatform.inf\r
-INF RuleOverride = ACPITABLE QuarkPlatformPkg/Acpi/AcpiTables/AcpiTables.inf\r
-\r
-#\r
-# SMM\r
-#\r
-INF MdeModulePkg/Core/PiSmmCore/PiSmmIpl.inf\r
-INF MdeModulePkg/Core/PiSmmCore/PiSmmCore.inf\r
-INF UefiCpuPkg/PiSmmCpuDxeSmm/PiSmmCpuDxeSmm.inf\r
-INF UefiCpuPkg/CpuIo2Smm/CpuIo2Smm.inf\r
-INF QuarkSocPkg/QuarkNorthCluster/Smm/Dxe/SmmControlDxe/SmmControlDxe.inf\r
-INF QuarkSocPkg/QuarkNorthCluster/Smm/DxeSmm/QncSmmDispatcher/QNCSmmDispatcher.inf\r
-INF QuarkPlatformPkg/Acpi/DxeSmm/AcpiSmm/AcpiSmmPlatform.inf\r
-INF QuarkPlatformPkg/Acpi/DxeSmm/SmmPowerManagement/SmmPowerManagement.inf\r
-INF MdeModulePkg/Universal/LockBox/SmmLockBox/SmmLockBox.inf\r
-INF UefiCpuPkg/PiSmmCommunication/PiSmmCommunicationSmm.inf\r
-\r
-#\r
-# SMBIOS\r
-#\r
-INF MdeModulePkg/Universal/SmbiosDxe/SmbiosDxe.inf\r
-INF QuarkPlatformPkg/Platform/Dxe/SmbiosMiscDxe/SmbiosMiscDxe.inf\r
-INF QuarkPlatformPkg/Platform/Dxe/MemorySubClass/MemorySubClass.inf\r
-\r
-#\r
-# PCI\r
-#\r
-INF QuarkPlatformPkg/Pci/Dxe/PciPlatform/PciPlatform.inf\r
-INF MdeModulePkg/Bus/Pci/PciBusDxe/PciBusDxe.inf\r
-INF QuarkSocPkg/QuarkSouthCluster/IohInit/Dxe/IohInitDxe.inf\r
-!if $(SOURCE_DEBUG_ENABLE)\r
-!else\r
-INF MdeModulePkg/Bus/Pci/PciSioSerialDxe/PciSioSerialDxe.inf\r
-!endif\r
-\r
-#\r
-# USB\r
-#\r
-!if $(PERFORMANCE_ENABLE)\r
-!else\r
-INF MdeModulePkg/Bus/Pci/EhciDxe/EhciDxe.inf\r
-INF QuarkSocPkg/QuarkSouthCluster/Usb/Ohci/Dxe/OhciDxe.inf\r
-INF MdeModulePkg/Bus/Usb/UsbBusDxe/UsbBusDxe.inf\r
-INF MdeModulePkg/Bus/Usb/UsbKbDxe/UsbKbDxe.inf\r
-INF MdeModulePkg/Bus/Usb/UsbMouseDxe/UsbMouseDxe.inf\r
-INF MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassStorageDxe.inf\r
-!endif\r
-\r
-#\r
-# SDIO\r
-#\r
-!if $(PERFORMANCE_ENABLE)\r
-!else\r
-INF QuarkSocPkg/QuarkSouthCluster/Sdio/Dxe/SDControllerDxe/SDControllerDxe.inf\r
-INF QuarkSocPkg/QuarkSouthCluster/Sdio/Dxe/SDMediaDeviceDxe/SDMediaDeviceDxe.inf\r
-!endif\r
-\r
-#\r
-# Console\r
-#\r
-INF MdeModulePkg/Universal/Console/ConPlatformDxe/ConPlatformDxe.inf\r
-INF MdeModulePkg/Universal/Console/ConSplitterDxe/ConSplitterDxe.inf\r
-INF MdeModulePkg/Universal/Console/TerminalDxe/TerminalDxe.inf\r
-\r
-INF MdeModulePkg/Universal/HiiDatabaseDxe/HiiDatabaseDxe.inf\r
-INF MdeModulePkg/Universal/DisplayEngineDxe/DisplayEngineDxe.inf\r
-INF MdeModulePkg/Universal/SetupBrowserDxe/SetupBrowserDxe.inf\r
-INF MdeModulePkg/Universal/Disk/UnicodeCollation/EnglishDxe/EnglishDxe.inf\r
-\r
-#\r
-# File System Modules\r
-#\r
-!if $(PERFORMANCE_ENABLE)\r
-!else\r
-INF MdeModulePkg/Universal/Disk/DiskIoDxe/DiskIoDxe.inf\r
-INF MdeModulePkg/Universal/Disk/PartitionDxe/PartitionDxe.inf\r
-INF FatPkg/EnhancedFatDxe/Fat.inf\r
-!endif\r
-\r
-#\r
-# Performance Application\r
-#\r
-!if $(PERFORMANCE_ENABLE)\r
-INF ShellPkg/DynamicCommand/DpDynamicCommand/DpDynamicCommand.inf\r
-!endif\r
-\r
-#\r
-# Trusted Platform Module\r
-#\r
-!if $(MEASURED_BOOT_ENABLE)\r
-INF SecurityPkg/Tcg/MemoryOverwriteControl/TcgMor.inf\r
-INF SecurityPkg/Tcg/TcgDxe/TcgDxe.inf\r
-INF RuleOverride = DRIVER_ACPITABLE SecurityPkg/Tcg/TcgSmm/TcgSmm.inf\r
-!endif\r
-\r
-!if $(CAPSULE_ENABLE)\r
-INF MdeModulePkg/Universal/EsrtFmpDxe/EsrtFmpDxe.inf\r
-INF SignedCapsulePkg/Universal/SystemFirmwareUpdate/SystemFirmwareReportDxe.inf\r
-!endif\r
-\r
-!if $(RECOVERY_ENABLE)\r
-FILE FREEFORM = PCD(gEfiSignedCapsulePkgTokenSpaceGuid.PcdEdkiiRsa2048Sha256TestPublicKeyFileGuid) {\r
- SECTION RAW = BaseTools/Source/Python/Rsa2048Sha256Sign/TestSigningPublicKey.bin\r
- SECTION UI = "Rsa2048Sha256TestSigningPublicKey"\r
- }\r
-!endif\r
-\r
-!if $(CAPSULE_ENABLE)\r
-FILE FREEFORM = PCD(gEfiSignedCapsulePkgTokenSpaceGuid.PcdEdkiiPkcs7TestPublicKeyFileGuid) {\r
- SECTION RAW = BaseTools/Source/Python/Pkcs7Sign/TestRoot.cer\r
- SECTION UI = "Pkcs7TestRoot"\r
- }\r
-!endif\r
-\r
-################################################################################\r
-#\r
-# FV Section\r
-#\r
-# [FV] section is used to define what components or modules are placed within a flash\r
-# device file. This section also defines order the components and modules are positioned\r
-# within the image. The [FV] section consists of define statements, set statements and\r
-# module statements.\r
-#\r
-################################################################################\r
-[FV.FVMAIN_COMPACT]\r
-FvAlignment = 16\r
-ERASE_POLARITY = 1\r
-MEMORY_MAPPED = TRUE\r
-STICKY_WRITE = TRUE\r
-LOCK_CAP = TRUE\r
-LOCK_STATUS = TRUE\r
-WRITE_DISABLED_CAP = TRUE\r
-WRITE_ENABLED_CAP = TRUE\r
-WRITE_STATUS = TRUE\r
-WRITE_LOCK_CAP = TRUE\r
-WRITE_LOCK_STATUS = TRUE\r
-READ_DISABLED_CAP = TRUE\r
-READ_ENABLED_CAP = TRUE\r
-READ_STATUS = TRUE\r
-READ_LOCK_CAP = TRUE\r
-READ_LOCK_STATUS = TRUE\r
-\r
-FILE FV_IMAGE = 9E21FD93-9C72-4c15-8C4B-E77F1DB2D792 {\r
- SECTION GUIDED A31280AD-481E-41B6-95E8-127F4C984779 { # TIANO COMPRESS GUID\r
- SECTION FV_IMAGE = FVMAIN\r
- }\r
-}\r
-\r
-################################################################################\r
-#\r
-# FV Section\r
-#\r
-# [FV] section is used to define what components or modules are placed within a flash\r
-# device file. This section also defines order the components and modules are positioned\r
-# within the image. The [FV] section consists of define statements, set statements and\r
-# module statements.\r
-#\r
-################################################################################\r
-[FV.PAYLOAD]\r
-BlockSize = $(FLASH_BLOCKSIZE)\r
-FvAlignment = 16 #FV alignment and FV attributes setting.\r
-ERASE_POLARITY = 1\r
-MEMORY_MAPPED = TRUE\r
-STICKY_WRITE = TRUE\r
-LOCK_CAP = TRUE\r
-LOCK_STATUS = TRUE\r
-WRITE_DISABLED_CAP = TRUE\r
-WRITE_ENABLED_CAP = TRUE\r
-WRITE_STATUS = TRUE\r
-WRITE_LOCK_CAP = TRUE\r
-WRITE_LOCK_STATUS = TRUE\r
-READ_DISABLED_CAP = TRUE\r
-READ_ENABLED_CAP = TRUE\r
-READ_STATUS = TRUE\r
-READ_LOCK_CAP = TRUE\r
-READ_LOCK_STATUS = TRUE\r
-\r
-#\r
-# Shell and Applications\r
-#\r
-INF RuleOverride = TIANOCOMPRESSED ShellPkg/Application/Shell/Shell.inf\r
-\r
-!if $(CAPSULE_ENABLE) || $(RECOVERY_ENABLE)\r
-\r
-[FV.CapsuleDispatchFv]\r
-FvAlignment = 16\r
-ERASE_POLARITY = 1\r
-MEMORY_MAPPED = TRUE\r
-STICKY_WRITE = TRUE\r
-LOCK_CAP = TRUE\r
-LOCK_STATUS = TRUE\r
-WRITE_DISABLED_CAP = TRUE\r
-WRITE_ENABLED_CAP = TRUE\r
-WRITE_STATUS = TRUE\r
-WRITE_LOCK_CAP = TRUE\r
-WRITE_LOCK_STATUS = TRUE\r
-READ_DISABLED_CAP = TRUE\r
-READ_ENABLED_CAP = TRUE\r
-READ_STATUS = TRUE\r
-READ_LOCK_CAP = TRUE\r
-READ_LOCK_STATUS = TRUE\r
-\r
-!if $(CAPSULE_ENABLE)\r
-INF SignedCapsulePkg/Universal/SystemFirmwareUpdate/SystemFirmwareUpdateDxe.inf\r
-!endif\r
-\r
-[FV.SystemFirmwareUpdateCargo]\r
-FvAlignment = 16\r
-ERASE_POLARITY = 1\r
-MEMORY_MAPPED = TRUE\r
-STICKY_WRITE = TRUE\r
-LOCK_CAP = TRUE\r
-LOCK_STATUS = TRUE\r
-WRITE_DISABLED_CAP = TRUE\r
-WRITE_ENABLED_CAP = TRUE\r
-WRITE_STATUS = TRUE\r
-WRITE_LOCK_CAP = TRUE\r
-WRITE_LOCK_STATUS = TRUE\r
-READ_DISABLED_CAP = TRUE\r
-READ_ENABLED_CAP = TRUE\r
-READ_STATUS = TRUE\r
-READ_LOCK_CAP = TRUE\r
-READ_LOCK_STATUS = TRUE\r
-\r
-FILE RAW = 14D83A59-A810-4556-8192-1C0A593C065C { # PcdEdkiiSystemFirmwareFileGuid\r
- FD = Quark\r
- }\r
-\r
-FILE RAW = ce57b167-b0e4-41e8-a897-5f4feb781d40 { # gEdkiiSystemFmpCapsuleDriverFvFileGuid\r
- FV = CapsuleDispatchFv\r
- }\r
-\r
-FILE RAW = 812136D3-4D3A-433A-9418-29BB9BF78F6E { # gEdkiiSystemFmpCapsuleConfigFileGuid\r
- QuarkPlatformPkg/Feature/Capsule/SystemFirmwareUpdateConfig/SystemFirmwareUpdateConfig.ini\r
- }\r
-\r
-!endif\r
-\r
-!if $(CAPSULE_ENABLE)\r
-[FmpPayload.FmpPayloadSystemFirmwarePkcs7]\r
-IMAGE_HEADER_INIT_VERSION = 0x02\r
-IMAGE_TYPE_ID = 62af20c0-7016-424a-9bf8-9ccc86584090 # PcdSystemFmpCapsuleImageTypeIdGuid\r
-IMAGE_INDEX = 0x1\r
-HARDWARE_INSTANCE = 0x0\r
-MONOTONIC_COUNT = 0x2\r
-CERTIFICATE_GUID = 4AAFD29D-68DF-49EE-8AA9-347D375665A7 # PKCS7\r
-\r
-FV = SystemFirmwareUpdateCargo\r
-\r
-[Capsule.QuarkFirmwareUpdateCapsuleFmpPkcs7]\r
-CAPSULE_GUID = 6dcbd5ed-e82d-4c44-bda1-7194199ad92a # gEfiFmpCapsuleGuid\r
-CAPSULE_FLAGS = PersistAcrossReset,InitiateReset\r
-CAPSULE_HEADER_SIZE = 0x20\r
-CAPSULE_HEADER_INIT_VERSION = 0x1\r
-\r
-FMP_PAYLOAD = FmpPayloadSystemFirmwarePkcs7\r
-!endif\r
-\r
-!if $(RECOVERY_ENABLE)\r
-[FmpPayload.FmpPayloadSystemFirmwareRsa2048]\r
-IMAGE_HEADER_INIT_VERSION = 0x02\r
-IMAGE_TYPE_ID = 62af20c0-7016-424a-9bf8-9ccc86584090 # PcdSystemFmpCapsuleImageTypeIdGuid\r
-IMAGE_INDEX = 0x1\r
-HARDWARE_INSTANCE = 0x0\r
-MONOTONIC_COUNT = 0x2\r
-CERTIFICATE_GUID = A7717414-C616-4977-9420-844712A735BF # RSA2048SHA256\r
-\r
-FV = SystemFirmwareUpdateCargo\r
-\r
-[Capsule.QuarkRec]\r
-CAPSULE_GUID = 6dcbd5ed-e82d-4c44-bda1-7194199ad92a # gEfiFmpCapsuleGuid\r
-CAPSULE_FLAGS = PersistAcrossReset,InitiateReset\r
-CAPSULE_HEADER_SIZE = 0x20\r
-CAPSULE_HEADER_INIT_VERSION = 0x1\r
-\r
-FMP_PAYLOAD = FmpPayloadSystemFirmwareRsa2048\r
-!endif\r
-\r
-################################################################################\r
-#\r
-# Rules are use with the [FV] section's module INF type to define\r
-# how an FFS file is created for a given INF file. The following Rule are the default\r
-# rules for the different module type. User can add the customized rules to define the\r
-# content of the FFS file.\r
-#\r
-################################################################################\r
-[Rule.Common.SEC]\r
- FILE SEC = $(NAMED_GUID) RELOCS_STRIPPED {\r
- TE TE Align = 8 $(INF_OUTPUT)/$(MODULE_NAME).efi\r
- RAW BIN Align = 16 |.com\r
- }\r
-\r
-[Rule.Common.PEI_CORE]\r
- FILE PEI_CORE = $(NAMED_GUID) {\r
- TE TE $(INF_OUTPUT)/$(MODULE_NAME).efi\r
- UI STRING="$(MODULE_NAME)" Optional\r
- VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)\r
- }\r
-\r
-[Rule.Common.PEIM.NORELOC]\r
- FILE PEIM = $(NAMED_GUID) RELOCS_STRIPPED {\r
- PEI_DEPEX PEI_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex\r
- TE TE $(INF_OUTPUT)/$(MODULE_NAME).efi\r
- UI STRING="$(MODULE_NAME)" Optional\r
- VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)\r
- }\r
-\r
-[Rule.Common.PEIM]\r
- FILE PEIM = $(NAMED_GUID) {\r
- PEI_DEPEX PEI_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex\r
- TE TE $(INF_OUTPUT)/$(MODULE_NAME).efi\r
- UI STRING="$(MODULE_NAME)" Optional\r
- VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)\r
- }\r
-\r
-[Rule.Common.DXE_CORE]\r
- FILE DXE_CORE = $(NAMED_GUID) {\r
- PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi\r
- UI STRING="$(MODULE_NAME)" Optional\r
- VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)\r
- }\r
-\r
-[Rule.Common.UEFI_DRIVER]\r
- FILE DRIVER = $(NAMED_GUID) {\r
- DXE_DEPEX DXE_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex\r
- PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi\r
- UI STRING="$(MODULE_NAME)" Optional\r
- VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)\r
- }\r
-\r
-[Rule.Common.DXE_DRIVER]\r
- FILE DRIVER = $(NAMED_GUID) {\r
- DXE_DEPEX DXE_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex\r
- PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi\r
- UI STRING="$(MODULE_NAME)" Optional\r
- VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)\r
- }\r
-\r
-[Rule.Common.DXE_RUNTIME_DRIVER]\r
- FILE DRIVER = $(NAMED_GUID) {\r
- DXE_DEPEX DXE_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex\r
- PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi\r
- UI STRING="$(MODULE_NAME)" Optional\r
- VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)\r
- }\r
-\r
-[Rule.Common.DXE_SMM_DRIVER]\r
- FILE SMM = $(NAMED_GUID) {\r
- SMM_DEPEX SMM_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex\r
- PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi\r
- UI STRING="$(MODULE_NAME)" Optional\r
- VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)\r
- }\r
-\r
-[Rule.Common.DXE_SMM_DRIVER.DRIVER_ACPITABLE]\r
- FILE SMM = $(NAMED_GUID) {\r
- DXE_DEPEX DXE_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex\r
- PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi\r
- RAW ACPI Optional |.acpi\r
- RAW ASL Optional |.aml\r
- UI STRING="$(MODULE_NAME)" Optional\r
- VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)\r
- }\r
-\r
-[Rule.Common.SMM_CORE]\r
- FILE SMM_CORE = $(NAMED_GUID) {\r
- PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi\r
- UI STRING="$(MODULE_NAME)" Optional\r
- VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)\r
- }\r
-\r
-[Rule.Common.UEFI_APPLICATION]\r
- FILE APPLICATION = $(NAMED_GUID) {\r
- PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi\r
- UI STRING="$(MODULE_NAME)" Optional\r
- VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)\r
- }\r
-\r
-[Rule.Common.UEFI_APPLICATION.TIANOCOMPRESSED]\r
- FILE APPLICATION = $(NAMED_GUID) {\r
- UI STRING="$(MODULE_NAME)" Optional\r
- VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)\r
- SECTION GUIDED A31280AD-481E-41B6-95E8-127F4C984779 PROCESSING_REQUIRED = TRUE { # TIANO COMPRESS GUID\r
- PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi\r
- }\r
- }\r
-\r
-[Rule.Common.UEFI_APPLICATION.UI]\r
- FILE APPLICATION = $(NAMED_GUID) {\r
- PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi\r
- UI STRING="Enter Setup"\r
- VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)\r
- }\r
-\r
-[Rule.Common.USER_DEFINED.ACPITABLE]\r
- FILE FREEFORM = $(NAMED_GUID) {\r
- RAW ACPI |.acpi\r
- RAW ASL |.aml\r
- }\r
-\r
-[Rule.Common.PEIM.FMP_IMAGE_DESC]\r
- FILE PEIM = $(NAMED_GUID) {\r
- RAW BIN |.acpi\r
- PEI_DEPEX PEI_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex\r
- PE32 PE32 Align=4K $(INF_OUTPUT)/$(MODULE_NAME).efi\r
- UI STRING="$(MODULE_NAME)" Optional\r
- VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)\r
- }\r
-\r
projects / mirror_edk2.git / blobdiff