\r
#string STR_GEN_PROBLEM #language en-US "%H%s%N: Unknown flag - '%H%s%N'\r\n"\r
#string STR_GEN_PROBLEM_VAL #language en-US "%H%s%N: Bad value - '%H%s%N' for flag - '%H%s%N'\r\n"\r
+#string STR_GEN_DUPLICATE #language en-US "%H%s%N: Duplicate flag - '%H%s%N'\r\n"\r
#string STR_GEN_NO_VALUE #language en-US "%H%s%N: Missing argument for flag - '%H%s%N'\r\n"\r
#string STR_GEN_TOO_FEW #language en-US "%H%s%N: Too few arguments.\r\n"\r
#string STR_GEN_TOO_MANY #language en-US "%H%s%N: Too many arguments.\r\n"\r
#string STR_GEN_PCIRBIO_NF #language en-US "%H%s%N: Protocol - PciRootBridgeIo not found.\r\n"\r
#string STR_GEN_PCIRBIO_ER #language en-US "%H%s%N: Problem accessing the data using Protocol - PciRootBridgeIo\r\n"\r
#string STR_GEN_PARAM_INV #language en-US "%H%s%N: Invalid argument - '%H%s%N'\r\n"\r
-#string STR_GEN_PARAM_INV_HEX #language en-US "%H%s%N: Invalid parameter - '%H%s%N:'. Must be hexadecimal.\r\n"\r
+#string STR_GEN_PARAM_INV_HEX #language en-US "%H%s%N: Invalid parameter - '%H%s%N'. Must be hexadecimal.\r\n"\r
#string STR_GEN_PARAM_CONFLICT #language en-US "%H%s%N: Flags conflict with - '%H%s%N' and '%H%s%N'\r\n"\r
#string STR_GEN_OUT_MEM #language en-US "%H%s%N: Memory allocation was not successful.\r\n"\r
#string STR_GEN_MAP_PROTOCOL #language en-US "%H%s%N: Mapped device '%B%s%N' does not have protocol %B%s%N\r\n"\r
#string STR_DBLK_HEADER #language en-US "LBA %016LX Size %08x bytes BlkIo %0x\r\n"\r
\r
#string STR_COMP_HEADER #language en-US "Compare %s to %s.\r\n"\r
-#string STR_COMP_SIZE_FAIL #language en-US "Difference # 1: File size mismatch.\r\n"\r
-#string STR_COMP_SPOT_FAIL1 #language en-US ""\r
- "Difference #% 2d:\r\n"\r
- "File1: %s\r\n"\r
- " %08x: %02x *%c*\r\n"\r
- "File2: %s\r\n"\r
- " %08x: %02x *%c*\r\n"\r
-#string STR_COMP_SPOT_FAIL2 #language en-US ""\r
- "Difference #% 2d:\r\n"\r
- "File1: %s\r\n"\r
- " %08x: %02x %02x *%c%c*\r\n"\r
- "File2: %s\r\n"\r
- " %08x: %02x %02x *%c%c*\r\n"\r
-#string STR_COMP_SPOT_FAIL3 #language en-US ""\r
- "Difference #% 2d:\r\n"\r
- "File1: %s\r\n"\r
- " %08x: %02x %02x %02x *%c%c%c*\r\n"\r
- "File2: %s\r\n"\r
- " %08x: %02x %02x %02x *%c%c%c*\r\n"\r
-#string STR_COMP_SPOT_FAIL4 #language en-US ""\r
- "Difference #% 2d:\r\n"\r
- "File1: %s\r\n"\r
- " %08x: %02x %02x %02x %02x *%c%c%c%c*\r\n"\r
- "File2: %s\r\n"\r
- " %08x: %02x %02x %02x %02x *%c%c%c%c*\r\n"\r
+#string STR_COMP_DIFFERENCE_POINT #language en-US "Difference #% 2u:\r\n"\r
+#string STR_COMP_END_OF_FILE #language en-US " <EOF>"\r
\r
#string STR_COMP_FOOTER_FAIL #language en-US "[difference(s) encountered] \r\n"\r
#string STR_COMP_FOOTER_PASS #language en-US "[no differences encountered]\r\n"\r
#string STR_MEMMAP_GET_FAILED #language en-US "%H%s%N: Unable to get memory map\r\n"\r
#string STR_MEMMAP_LIST_HEAD #language en-US "Type Start End # Pages Attributes\r\n"\r
#string STR_MEMMAP_LIST_ITEM #language en-US "% -10s %016LX-%016LX %016LX %016LX\r\n"\r
+#string STR_MEMMAP_LIST_ITEM_OTHER #language en-US "%08x %016LX-%016LX %016LX %016LX\r\n"\r
#string STR_MEMMAP_LIST_SUMM #language en-US " \r\n"\r
" Reserved : %,14ld Pages (%,ld Bytes)\r\n"\r
" LoaderCode: %,14ld Pages (%,ld Bytes)\r\n"\r
" PalCode : %,14ld Pages (%,ld Bytes)\r\n"\r
" Available : %,14ld Pages (%,ld Bytes)\r\n"\r
" Persistent: %,14ld Pages (%,ld Bytes)\r\n"\r
- " -------------- \r\n"\r
+#string STR_MEMMAP_LIST_SUMM_OTHER #language en-US " %08x : %,14ld Pages (%,ld Bytes)\r\n"\r
+#string STR_MEMMAP_LIST_SUMM2 #language en-US " -------------- \r\n"\r
"Total Memory: %,14ld MB (%,ld Bytes)\r\n"\r
#string STR_MEMMAP_LIST_ITEM_SFO #language en-US "MemoryMap,"%s","%LX","%LX","%LX","%LX"\r\n"\r
#string STR_MEMMAP_LIST_SUMM_SFO #language en-US "MemoryMapSummary,"%Ld","%Ld","%Ld","%Ld","%Ld","%Ld","%Ld","%Ld","%Ld","%Ld","%Ld","%Ld","%Ld","%Ld","%Ld","%Ld"\r\n"\r
"MM Address [Value] [-w 1|2|4|8] [-MEM | -MMIO | -IO | -PCI | -PCIE] [-n]\r\n"\r
".SH OPTIONS\r\n"\r
" \r\n"\r
-" Address - Specifies a starting address.\r\n"\r
-" Value - Specifies the value to write.\r\n"\r
+" Address - Starting address in hexadecimal format.\r\n"\r
+" Value - The value to write in hexadecimal format.\r\n"\r
" -MEM - Memory Address type\r\n"\r
" -MMIO - Memory Mapped IO Address type\r\n"\r
" -IO - IO Address type\r\n"\r
" -PCI - PCI Configuration Space Address type:\r\n"\r
-" Address format: 0x000000ssbbddffrr\r\n"\r
-" ss - Segment\r\n"\r
+" Address format: ssssbbddffrr\r\n"\r
+" ssss - Segment\r\n"\r
" bb - Bus\r\n"\r
" dd - Device\r\n"\r
" ff - Function\r\n"\r
" rr - Register\r\n"\r
" -PCIE - PCIE Configuration Space Address type:\r\n"\r
-" Address format: 0x00000ssbbddffrrr\r\n"\r
-" ss - Segment\r\n"\r
+" Address format: ssssbbddffrrr\r\n"\r
+" ssss - Segment\r\n"\r
" bb - Bus\r\n"\r
" dd - Device\r\n"\r
" ff - Function\r\n"\r
" follow the PCI Configuration Space Address format above. The 'PCI'\r\n"\r
" command can be used to determine the address for a specified device.\r\n"\r
" It is listed in the PCI configuration space dump information in the\r\n"\r
-" following format: "[EFI 0x000000ssbbddffxx]".\r\n"\r
+" following format: "[EFI ssbbddffxx]".\r\n"\r
" 5. If the PCIE address type is specified, the 'Address' parameter must\r\n"\r
" follow the PCIE Configuration Space Address format above.\r\n"\r
" 6. In interactive mode, type a hex value to modify, 'q' or '.' to exit.\r\n"\r
" IO 0x0000000000000086 : 0xFF >\r\n"\r
" IO 0x0000000000000087 : 0x00 > q\r\n"\r
" \r\n"\r
-" * To display PCI configuration space, ss=00, bb=00, dd=00, ff=00, rr=00:\r\n"\r
-" Shell> mm 0000000000 -PCI\r\n"\r
+" * To display PCI configuration space, ss=0000, bb=00, dd=00, ff=00, rr=00:\r\n"\r
+" Shell> mm 000000000000 -PCI\r\n"\r
" PCI 0x0000000000000000 : 0x86 >\r\n"\r
" PCI 0x0000000000000001 : 0x80 >\r\n"\r
" PCI 0x0000000000000002 : 0x30 >\r\n"\r
" PCI 0x0000000000000005 : 0x00 > q\r\n"\r
" These contents can also be displayed by 'PCI 00 00 00'.\r\n"\r
" \r\n"\r
-" * To display PCIE configuration space, ss=00, bb=06, dd=00, ff=00, rrr=000:\r\n"\r
-" Shell> mm 00060000000 -PCIE\r\n"\r
+" * To display PCIE configuration space, ss=0000, bb=06, dd=00, ff=00, rrr=000:\r\n"\r
+" Shell> mm 0000060000000 -PCIE\r\n"\r
" PCIE 0x0000000060000000 : 0xAB >\r\n"\r
" PCIE 0x0000000060000001 : 0x11 >\r\n"\r
" PCIE 0x0000000060000002 : 0x61 >\r\n"\r
#string STR_GET_HELP_PCI #language en-US ""\r
".TH pci 0 "Displays PCI device information."\r\n"\r
".SH NAME\r\n"\r
-"Displays a PCI device list or PCI function configuration space of a device.\r\n"\r
+"Displays PCI device list or PCI function configuration space and PCIe extended\r\n"\r
+"configuration space.\r\n"\r
".SH SYNOPSIS\r\n"\r
" \r\n"\r
-"PCI [Bus Dev [Func] [-s Seg] [-i]]\r\n"\r
+"PCI [Bus Dev [Func] [-s Seg] [-i [-ec ID]]]\r\n"\r
".SH OPTIONS\r\n"\r
" \r\n"\r
-" -s - Specifies optional segment number.\r\n"\r
+" -s - Specifies optional segment number (hexadecimal number).\r\n"\r
" -i - Displays interpreted information.\r\n"\r
-" Bus - Specifies a bus number.\r\n"\r
-" Dev - Specifies a device number.\r\n"\r
-" Func - Specifies a function number.\r\n"\r
+" -ec - Displays detailed interpretation of specified PCIe extended capability\r\n"\r
+" ID (hexadecimal number).\r\n"\r
+" Bus - Specifies a bus number (hexadecimal number).\r\n"\r
+" Dev - Specifies a device number (hexadecimal number).\r\n"\r
+" Func - Specifies a function number (hexadecimal number).\r\n"\r
".SH DESCRIPTION\r\n"\r
" \r\n"\r
"NOTES:\r\n"\r