read/write debug packet to communication with HOST based on transfer\r
protocol.\r
\r
- Copyright (c) 2010 - 2014, Intel Corporation. All rights reserved.<BR>\r
+ Copyright (c) 2010 - 2015, Intel Corporation. All rights reserved.<BR>\r
This program and the accompanying materials\r
are licensed and made available under the terms and conditions of the BSD License\r
which accompanies this distribution. The full text of the license may be found at\r
}\r
\r
/**\r
- Caculate Mailbox checksum and update the checksum field.\r
+ Calculate Mailbox checksum and update the checksum field.\r
\r
@param[in] Mailbox Debug Agent Mailbox pointer.\r
\r
- CalculateSum8 ((UINT8 *)&Value, sizeof(UINT8));\r
Mailbox->HostSequenceNo = (UINT8) Value;\r
break;\r
+ case DEBUG_MAILBOX_DEBUG_TIMER_FREQUENCY:\r
+ Mailbox->ToBeCheckSum = Mailbox->CheckSum + CalculateSum8 ((UINT8 *)&Mailbox->DebugTimerFrequency, sizeof(UINT32))\r
+ - CalculateSum8 ((UINT8 *)&Value, sizeof(UINT32));\r
+ Mailbox->DebugTimerFrequency = (UINT32) Value;\r
+ break;\r
}\r
UpdateMailboxChecksum (Mailbox);\r
ReleaseMpSpinLock (&mDebugMpContext.MailboxSpinLock);\r
}\r
+\r
+/**\r
+ Read data from debug device and save the data in buffer.\r
+\r
+ Reads NumberOfBytes data bytes from a debug device into the buffer\r
+ specified by Buffer. The number of bytes actually read is returned.\r
+ If the return value is less than NumberOfBytes, then the rest operation failed.\r
+ If NumberOfBytes is zero, then return 0.\r
+\r
+ @param Handle Debug port handle.\r
+ @param Buffer Pointer to the data buffer to store the data read from the debug device.\r
+ @param NumberOfBytes Number of bytes which will be read.\r
+ @param Timeout Timeout value for reading from debug device. It unit is Microsecond.\r
+\r
+ @retval 0 Read data failed, no data is to be read.\r
+ @retval >0 Actual number of bytes read from debug device.\r
+\r
+**/\r
+UINTN\r
+DebugAgentReadBuffer (\r
+ IN DEBUG_PORT_HANDLE Handle,\r
+ IN UINT8 *Buffer,\r
+ IN UINTN NumberOfBytes,\r
+ IN UINTN Timeout\r
+ )\r
+{\r
+ UINTN Index;\r
+ UINT32 Begin;\r
+ UINT32 TimeoutTicker;\r
+ UINT32 TimerRound;\r
+ UINT32 TimerFrequency;\r
+ UINT32 TimerCycle;\r
+ \r
+ Begin = 0;\r
+ TimeoutTicker = 0; \r
+ TimerRound = 0;\r
+ TimerFrequency = GetMailboxPointer()->DebugTimerFrequency;\r
+ TimerCycle = GetApicTimerInitCount ();\r
+\r
+ if (Timeout != 0) {\r
+ Begin = GetApicTimerCurrentCount ();\r
+ TimeoutTicker = (UINT32) DivU64x32 (\r
+ MultU64x64 (\r
+ TimerFrequency,\r
+ Timeout\r
+ ),\r
+ 1000000u\r
+ );\r
+ TimerRound = (UINT32) DivU64x32Remainder (TimeoutTicker, TimerCycle / 2, &TimeoutTicker);\r
+ }\r
+ Index = 0;\r
+ while (Index < NumberOfBytes) {\r
+ if (DebugPortPollBuffer (Handle)) {\r
+ DebugPortReadBuffer (Handle, Buffer + Index, 1, 0);\r
+ Index ++; \r
+ continue;\r
+ }\r
+ if (Timeout != 0) {\r
+ if (TimerRound == 0) {\r
+ if (IsDebugTimerTimeout (TimerCycle, Begin, TimeoutTicker)) {\r
+ //\r
+ // If time out occurs.\r
+ //\r
+ return 0;\r
+ }\r
+ } else {\r
+ if (IsDebugTimerTimeout (TimerCycle, Begin, TimerCycle / 2)) {\r
+ TimerRound --;\r
+ Begin = GetApicTimerCurrentCount ();\r
+ }\r
+ }\r
+ }\r
+ }\r
+\r
+ return Index;\r
+}\r
+\r
/**\r
Set debug flag in mailbox.\r
\r
//\r
// Has received start symbol, try to read the rest part\r
//\r
- if (DebugPortReadBuffer (Handle, (UINT8 *)DebugHeader + OFFSET_OF (DEBUG_PACKET_HEADER, Command), sizeof (DEBUG_PACKET_HEADER) - OFFSET_OF (DEBUG_PACKET_HEADER, Command), READ_PACKET_TIMEOUT) == 0) {\r
+ if (DebugAgentReadBuffer (Handle, (UINT8 *)DebugHeader + OFFSET_OF (DEBUG_PACKET_HEADER, Command), sizeof (DEBUG_PACKET_HEADER) - OFFSET_OF (DEBUG_PACKET_HEADER, Command), READ_PACKET_TIMEOUT) == 0) {\r
//\r
// Timeout occur, exit\r
//\r
return EFI_CRC_ERROR;\r
}\r
Mailbox = GetMailboxPointer();\r
- if (((DebugHeader->Command & DEBUG_COMMAND_RESPONSE) == 0) &&\r
- (DebugHeader->SequenceNo == (UINT8) (Mailbox->HostSequenceNo + 1))) {\r
- //\r
- // Only updagte HostSequenceNo for new command packet\r
- //\r
- UpdateMailboxContent (Mailbox, DEBUG_MAILBOX_HOST_SEQUENCE_NO_INDEX, DebugHeader->SequenceNo);\r
- return EFI_SUCCESS;\r
- } else {\r
- //\r
- // If one old command or response packet received, skip it\r
- //\r
- return EFI_DEVICE_ERROR;\r
+ if (IS_REQUEST (DebugHeader)) {\r
+ if (DebugHeader->SequenceNo == (UINT8) (Mailbox->HostSequenceNo + 1)) {\r
+ //\r
+ // Only updagte HostSequenceNo for new command packet \r
+ //\r
+ UpdateMailboxContent (Mailbox, DEBUG_MAILBOX_HOST_SEQUENCE_NO_INDEX, DebugHeader->SequenceNo);\r
+ return EFI_SUCCESS;\r
+ }\r
+ if (DebugHeader->SequenceNo == Mailbox->HostSequenceNo) {\r
+ return EFI_SUCCESS;\r
+ }\r
}\r
+\r
+ return EFI_DEVICE_ERROR;\r
}\r
\r
/**\r
}\r
\r
/**\r
- Exectue Stepping command.\r
+ Execute Stepping command.\r
\r
@param[in] CpuContext Pointer to saved CPU context.\r
\r
Eflags = (IA32_EFLAGS32 *) &CpuContext->Eflags;\r
Eflags->Bits.TF = 1;\r
Eflags->Bits.RF = 1;\r
+ //\r
+ // Save and clear EFLAGS.IF to avoid interrupt happen when executing Stepping\r
+ //\r
+ SetDebugFlag (DEBUG_AGENT_FLAG_INTERRUPT_FLAG, Eflags->Bits.IF);\r
+ Eflags->Bits.IF = 0;\r
+ //\r
+ // Set Stepping Flag\r
+ //\r
+ SetDebugFlag (DEBUG_AGENT_FLAG_STEPPING, 1);\r
+}\r
+\r
+/**\r
+ Do some cleanup after Stepping command done.\r
+\r
+ @param[in] CpuContext Pointer to saved CPU context.\r
+\r
+**/\r
+VOID\r
+CommandSteppingCleanup (\r
+ IN DEBUG_CPU_CONTEXT *CpuContext\r
+ )\r
+{\r
+ IA32_EFLAGS32 *Eflags;\r
+\r
+ Eflags = (IA32_EFLAGS32 *) &CpuContext->Eflags;\r
+ //\r
+ // Restore EFLAGS.IF\r
+ //\r
+ Eflags->Bits.IF = GetDebugFlag (DEBUG_AGENT_FLAG_INTERRUPT_FLAG);\r
+ //\r
+ // Clear Stepping flag\r
+ //\r
+ SetDebugFlag (DEBUG_AGENT_FLAG_STEPPING, 0);\r
}\r
\r
/**\r
UpdateMailboxContent (Mailbox, DEBUG_MAILBOX_LAST_ACK, AckCommand);\r
}\r
\r
+/**\r
+ Decompress the Data in place.\r
+\r
+ @param[in, out] Data The compressed data buffer.\r
+ The buffer is assumed large enough to hold the uncompressed data.\r
+ @param[in] Length The length of the compressed data buffer.\r
+\r
+ @return The length of the uncompressed data buffer.\r
+**/\r
+UINT8\r
+DecompressDataInPlace (\r
+ IN OUT UINT8 *Data,\r
+ IN UINTN Length\r
+ )\r
+{\r
+ UINTN Index;\r
+ UINT16 LastChar;\r
+ UINTN LastCharCount;\r
+ UINT8 CurrentChar;\r
+\r
+ LastChar = (UINT16) -1;\r
+ LastCharCount = 0;\r
+ for (Index = 0; Index < Length; Index++) {\r
+ CurrentChar = Data[Index];\r
+ if (LastCharCount == 2) {\r
+ LastCharCount = 0;\r
+ CopyMem (&Data[Index + CurrentChar], &Data[Index + 1], Length - Index - 1);\r
+ SetMem (&Data[Index], CurrentChar, (UINT8) LastChar);\r
+ LastChar = (UINT16) -1;\r
+ Index += CurrentChar - 1;\r
+ Length += CurrentChar - 1;\r
+ } else {\r
+ if (LastChar != CurrentChar) {\r
+ LastCharCount = 0;\r
+ }\r
+ LastCharCount++;\r
+ LastChar = CurrentChar;\r
+ }\r
+ }\r
+\r
+ ASSERT (Length <= DEBUG_DATA_MAXIMUM_REAL_DATA);\r
+\r
+ return (UINT8) Length;\r
+}\r
+\r
/**\r
Receive valid packet from HOST.\r
\r
//\r
// Find the valid start symbol\r
//\r
- Received = DebugPortReadBuffer (Handle, &DebugHeader->StartSymbol, sizeof (DebugHeader->StartSymbol), TimeoutForStartSymbol);\r
+ Received = DebugAgentReadBuffer (Handle, &DebugHeader->StartSymbol, sizeof (DebugHeader->StartSymbol), TimeoutForStartSymbol);\r
if (Received < sizeof (DebugHeader->StartSymbol)) {\r
- DebugAgentMsgPrint (DEBUG_AGENT_WARNING, "DebugPortReadBuffer(StartSymbol) timeout\n");\r
+ DebugAgentMsgPrint (DEBUG_AGENT_WARNING, "DebugAgentReadBuffer(StartSymbol) timeout\n");\r
return RETURN_TIMEOUT;\r
}\r
\r
- if (DebugHeader->StartSymbol != DEBUG_STARTING_SYMBOL_NORMAL) {\r
+ if ((DebugHeader->StartSymbol != DEBUG_STARTING_SYMBOL_NORMAL) && (DebugHeader->StartSymbol != DEBUG_STARTING_SYMBOL_COMPRESS)) {\r
DebugAgentMsgPrint (DEBUG_AGENT_WARNING, "Invalid start symbol received [%02x]\n", DebugHeader->StartSymbol);\r
continue;\r
}\r
//\r
// Read Package header till field Length\r
//\r
- Received = DebugPortReadBuffer (\r
+ Received = DebugAgentReadBuffer (\r
Handle,\r
- (UINT8 *)DebugHeader + OFFSET_OF (DEBUG_PACKET_HEADER, Command),\r
+ (UINT8 *) DebugHeader + OFFSET_OF (DEBUG_PACKET_HEADER, Command),\r
OFFSET_OF (DEBUG_PACKET_HEADER, Length) + sizeof (DebugHeader->Length) - sizeof (DebugHeader->StartSymbol),\r
Timeout\r
);\r
if (Received == 0) {\r
- DebugAgentMsgPrint (DEBUG_AGENT_ERROR, "DebugPortReadBuffer(Command) timeout\n");\r
+ DebugAgentMsgPrint (DEBUG_AGENT_ERROR, "DebugAgentReadBuffer(Command) timeout\n");\r
return RETURN_TIMEOUT;\r
}\r
if (DebugHeader->Length < sizeof (DEBUG_PACKET_HEADER)) {\r
//\r
// Read the payload data include the CRC field\r
//\r
- Received = DebugPortReadBuffer (Handle, &DebugHeader->SequenceNo, (UINT8) (DebugHeader->Length - OFFSET_OF (DEBUG_PACKET_HEADER, SequenceNo)), Timeout);\r
+ Received = DebugAgentReadBuffer (Handle, &DebugHeader->SequenceNo, (UINT8) (DebugHeader->Length - OFFSET_OF (DEBUG_PACKET_HEADER, SequenceNo)), Timeout);\r
if (Received == 0) {\r
- DebugAgentMsgPrint (DEBUG_AGENT_ERROR, "DebugPortReadBuffer(SequenceNo) timeout\n");\r
+ DebugAgentMsgPrint (DEBUG_AGENT_ERROR, "DebugAgentReadBuffer(SequenceNo) timeout\n");\r
return RETURN_TIMEOUT;\r
}\r
//\r
\r
DebugAgentDataMsgPrint (DEBUG_AGENT_VERBOSE, FALSE, (UINT8 *) DebugHeader, DebugHeader->Length);\r
\r
+ if (DebugHeader->StartSymbol == DEBUG_STARTING_SYMBOL_COMPRESS) {\r
+ DebugHeader->StartSymbol = DEBUG_STARTING_SYMBOL_NORMAL;\r
+ DebugHeader->Length = DecompressDataInPlace (\r
+ (UINT8 *) (DebugHeader + 1), DebugHeader->Length - sizeof (DEBUG_PACKET_HEADER)\r
+ ) + sizeof (DEBUG_PACKET_HEADER);\r
+ }\r
return RETURN_SUCCESS;\r
}\r
\r
if ((CpuContext->Dr6 & BIT14) != 0) {\r
Cause = DEBUG_DATA_BREAK_CAUSE_STEPPING;\r
//\r
- // If it's single step, no need to check DR0, to ensure single step work in PeCoffExtraActionLib\r
- // (right after triggering a breakpoint to report image load/unload).\r
+ // DR6.BIT14 Indicates (when set) that the debug exception was\r
+ // triggered by the single step execution mode.\r
+ // The single-step mode is the highest priority debug exception.\r
+ // This is single step, no need to check DR0, to ensure single step\r
+ // work in PeCoffExtraActionLib (right after triggering a breakpoint\r
+ // to report image load/unload).\r
//\r
return Cause;\r
\r
}\r
}\r
\r
+/**\r
+ Compress the data buffer but do not modify the original buffer.\r
+\r
+ The compressed data is directly send to the debug channel.\r
+ Compressing in place doesn't work because the data may become larger\r
+ during compressing phase. ("3 3 ..." --> "3 3 0 ...")\r
+ The routine is expected to be called three times:\r
+ 1. Compute the length of the compressed data buffer;\r
+ 2. Compute the CRC of the compressed data buffer;\r
+ 3. Compress the data and send to the debug channel.\r
+\r
+ @param[in] Handle The debug channel handle to send the compressed data buffer.\r
+ @param[in] Data The data buffer.\r
+ @param[in] Length The length of the data buffer.\r
+ @param[in] Send TRUE to send the compressed data buffer.\r
+ @param[out] CompressedLength Return the length of the compressed data buffer.\r
+ It may be larger than the Length in some cases.\r
+ @param[out] CompressedCrc Return the CRC of the compressed data buffer.\r
+**/\r
+VOID\r
+CompressData (\r
+ IN DEBUG_PORT_HANDLE Handle,\r
+ IN UINT8 *Data,\r
+ IN UINT8 Length,\r
+ IN BOOLEAN Send,\r
+ OUT UINTN *CompressedLength, OPTIONAL\r
+ OUT UINT16 *CompressedCrc OPTIONAL\r
+ )\r
+{\r
+ UINTN Index;\r
+ UINT8 LastChar;\r
+ UINT8 LastCharCount;\r
+ UINT8 CurrentChar;\r
+ UINTN CompressedIndex;\r
+\r
+ ASSERT (Length > 0);\r
+ LastChar = Data[0] + 1; // Just ensure it's different from the first byte.\r
+ LastCharCount = 0;\r
+\r
+ for (Index = 0, CompressedIndex = 0; Index <= Length; Index++) {\r
+ if (Index < Length) {\r
+ CurrentChar = Data[Index];\r
+ } else {\r
+ CurrentChar = (UINT8) LastChar + 1; // just ensure it's different from LastChar\r
+ }\r
+ if (LastChar != CurrentChar) {\r
+ if (LastCharCount == 1) {\r
+ CompressedIndex++;\r
+ if (CompressedCrc != NULL) {\r
+ *CompressedCrc = CalculateCrc16 (&LastChar, 1, *CompressedCrc);\r
+ }\r
+ if (Send) {\r
+ DebugPortWriteBuffer (Handle, &LastChar, 1);\r
+ }\r
+ \r
+ } else if (LastCharCount >= 2) {\r
+ CompressedIndex += 3;\r
+ LastCharCount -= 2;\r
+ if (CompressedCrc != NULL) {\r
+ *CompressedCrc = CalculateCrc16 (&LastChar, 1, *CompressedCrc);\r
+ *CompressedCrc = CalculateCrc16 (&LastChar, 1, *CompressedCrc);\r
+ *CompressedCrc = CalculateCrc16 (&LastCharCount, 1, *CompressedCrc);\r
+ }\r
+ if (Send) {\r
+ DebugPortWriteBuffer (Handle, &LastChar, 1);\r
+ DebugPortWriteBuffer (Handle, &LastChar, 1);\r
+ DebugPortWriteBuffer (Handle, &LastCharCount, 1);\r
+ }\r
+ }\r
+ LastCharCount = 0;\r
+ }\r
+ LastCharCount++;\r
+ LastChar = CurrentChar;\r
+ }\r
+\r
+ if (CompressedLength != NULL) {\r
+ *CompressedLength = CompressedIndex;\r
+ }\r
+}\r
+\r
/**\r
Read memory with speicifed width and send packet with response data to HOST.\r
\r
@param[in] Data Pointer to response data buffer.\r
@param[in] Count The number of data with specified Width.\r
@param[in] Width Data width in byte.\r
+ @param[in] DebugHeader Pointer to a buffer for creating response packet and receiving ACK packet,\r
+ to minimize the stack usage.\r
\r
@retval RETURN_SUCCESS Response data was sent successfully.\r
\r
**/\r
RETURN_STATUS\r
ReadMemoryAndSendResponsePacket (\r
- IN UINT8 *Data,\r
- IN UINT16 Count,\r
- IN UINT8 Width\r
+ IN UINT8 *Data,\r
+ IN UINT16 Count,\r
+ IN UINT8 Width,\r
+ IN DEBUG_PACKET_HEADER *DebugHeader\r
)\r
{\r
RETURN_STATUS Status;\r
- DEBUG_PACKET_HEADER *DebugHeader;\r
BOOLEAN LastPacket;\r
- DEBUG_PACKET_HEADER *AckDebugHeader;\r
- UINT8 DebugPacket[DEBUG_DATA_UPPER_LIMIT + sizeof (UINT64) - 1];\r
- UINT8 InputPacketBuffer[DEBUG_DATA_UPPER_LIMIT];\r
DEBUG_PORT_HANDLE Handle;\r
UINT8 SequenceNo;\r
UINTN RemainingDataSize;\r
- UINTN CurrentDataSize;\r
+ UINT8 CurrentDataSize;\r
+ UINTN CompressedDataSize;\r
\r
Handle = GetDebugPortHandle();\r
\r
- //\r
- // Data is appended end of Debug Packet header, make sure data address\r
- // in Debug Packet 8-byte alignment always\r
- //\r
- DebugHeader = (DEBUG_PACKET_HEADER *) (ALIGN_VALUE ((UINTN)&DebugPacket + sizeof (DEBUG_PACKET_HEADER), sizeof (UINT64))\r
- - sizeof (DEBUG_PACKET_HEADER));\r
- DebugHeader->StartSymbol = DEBUG_STARTING_SYMBOL_NORMAL;\r
-\r
RemainingDataSize = Count * Width;\r
while (TRUE) {\r
SequenceNo = GetMailboxPointer()->HostSequenceNo;\r
//\r
// If the remaining data is less one real packet size, this is the last data packet\r
//\r
- CurrentDataSize = RemainingDataSize;\r
+ CurrentDataSize = (UINT8) RemainingDataSize;\r
LastPacket = TRUE;\r
DebugHeader->Command = DEBUG_COMMAND_OK;\r
} else {\r
//\r
// Construct the rest Debug header\r
//\r
- DebugHeader->Length = (UINT8)(CurrentDataSize + sizeof (DEBUG_PACKET_HEADER));\r
- DebugHeader->SequenceNo = SequenceNo;\r
- DebugHeader->Crc = 0;\r
- CopyMemByWidth ((UINT8 *)(DebugHeader + 1), Data, (UINT16) CurrentDataSize / Width, Width);\r
+ DebugHeader->StartSymbol = DEBUG_STARTING_SYMBOL_NORMAL;\r
+ DebugHeader->Length = CurrentDataSize + sizeof (DEBUG_PACKET_HEADER);\r
+ DebugHeader->SequenceNo = SequenceNo;\r
+ DebugHeader->Crc = 0;\r
+ CopyMemByWidth ((UINT8 *) (DebugHeader + 1), Data, CurrentDataSize / Width, Width);\r
+\r
//\r
- // Calculate and fill the checksum, DebugHeader->Crc should be 0 before invoking CalculateCrc16 ()\r
+ // Compression/decompression support was added since revision 0.4.\r
+ // Revision 0.3 shouldn't compress the packet.\r
//\r
- DebugHeader->Crc = CalculateCrc16 ((UINT8 *) DebugHeader, DebugHeader->Length, 0);\r
+ if (DEBUG_AGENT_REVISION >= DEBUG_AGENT_REVISION_04) {\r
+ //\r
+ // Get the compressed data size without modifying the packet.\r
+ //\r
+ CompressData (\r
+ Handle,\r
+ (UINT8 *) (DebugHeader + 1),\r
+ CurrentDataSize,\r
+ FALSE,\r
+ &CompressedDataSize,\r
+ NULL\r
+ );\r
+ } else {\r
+ CompressedDataSize = CurrentDataSize;\r
+ }\r
+ if (CompressedDataSize < CurrentDataSize) {\r
+ DebugHeader->Length = (UINT8) CompressedDataSize + sizeof (DEBUG_PACKET_HEADER);\r
+ DebugHeader->StartSymbol = DEBUG_STARTING_SYMBOL_COMPRESS;\r
+ //\r
+ // Compute the CRC of the packet head without modifying the packet.\r
+ //\r
+ DebugHeader->Crc = CalculateCrc16 ((UINT8 *) DebugHeader, sizeof (DEBUG_PACKET_HEADER), 0);\r
+ CompressData (\r
+ Handle,\r
+ (UINT8 *) (DebugHeader + 1),\r
+ CurrentDataSize,\r
+ FALSE,\r
+ NULL,\r
+ &DebugHeader->Crc\r
+ );\r
+ //\r
+ // Send out the packet head.\r
+ //\r
+ DebugPortWriteBuffer (Handle, (UINT8 *) DebugHeader, sizeof (DEBUG_PACKET_HEADER));\r
+ //\r
+ // Compress and send out the packet data.\r
+ //\r
+ CompressData (\r
+ Handle,\r
+ (UINT8 *) (DebugHeader + 1),\r
+ CurrentDataSize,\r
+ TRUE,\r
+ NULL,\r
+ NULL\r
+ );\r
+ } else {\r
\r
- DebugAgentDataMsgPrint (DEBUG_AGENT_VERBOSE, TRUE, (UINT8 *) DebugHeader, DebugHeader->Length);\r
+ //\r
+ // Calculate and fill the checksum, DebugHeader->Crc should be 0 before invoking CalculateCrc16 ()\r
+ //\r
+ DebugHeader->Crc = CalculateCrc16 ((UINT8 *) DebugHeader, DebugHeader->Length, 0);\r
\r
- DebugPortWriteBuffer (Handle, (UINT8 *) DebugHeader, DebugHeader->Length);\r
+ DebugAgentDataMsgPrint (DEBUG_AGENT_VERBOSE, TRUE, (UINT8 *) DebugHeader, DebugHeader->Length);\r
+\r
+ DebugPortWriteBuffer (Handle, (UINT8 *) DebugHeader, DebugHeader->Length);\r
+ }\r
\r
while (TRUE) {\r
- Status = ReceivePacket (InputPacketBuffer, NULL, NULL, READ_PACKET_TIMEOUT, FALSE);\r
+ Status = ReceivePacket ((UINT8 *) DebugHeader, NULL, NULL, READ_PACKET_TIMEOUT, FALSE);\r
if (Status == RETURN_TIMEOUT) {\r
DebugAgentMsgPrint (DEBUG_AGENT_WARNING, "TARGET: Timeout in SendDataResponsePacket()\n");\r
break;\r
}\r
- AckDebugHeader = (DEBUG_PACKET_HEADER *) InputPacketBuffer;\r
- SequenceNo = AckDebugHeader->SequenceNo;\r
- if (AckDebugHeader->Command == DEBUG_COMMAND_OK &&\r
- SequenceNo == DebugHeader->SequenceNo &&\r
- LastPacket) {\r
+ if ((DebugHeader->Command == DEBUG_COMMAND_OK) && (DebugHeader->SequenceNo == SequenceNo) && LastPacket) {\r
//\r
// If this is the last packet, return RETURN_SUCCESS.\r
//\r
return RETURN_SUCCESS;\r
}\r
- if ((SequenceNo == (UINT8) (DebugHeader->SequenceNo + 1)) && (AckDebugHeader->Command == DEBUG_COMMAND_CONTINUE)) {\r
+ if ((DebugHeader->Command == DEBUG_COMMAND_CONTINUE) && (DebugHeader->SequenceNo == (UINT8) (SequenceNo + 1))) {\r
//\r
// Calculate the rest data size\r
//\r
Data += CurrentDataSize;\r
RemainingDataSize -= CurrentDataSize;\r
- UpdateMailboxContent (GetMailboxPointer(), DEBUG_MAILBOX_HOST_SEQUENCE_NO_INDEX, (UINT8) SequenceNo);\r
+ UpdateMailboxContent (GetMailboxPointer(), DEBUG_MAILBOX_HOST_SEQUENCE_NO_INDEX, DebugHeader->SequenceNo);\r
break;\r
}\r
- if (SequenceNo >= DebugHeader->SequenceNo) {\r
+ if (DebugHeader->SequenceNo >= SequenceNo) {\r
DebugAgentMsgPrint (DEBUG_AGENT_WARNING, "TARGET: Received one old or new command(SequenceNo is %x, last SequenceNo is %x)\n", SequenceNo, DebugHeader->SequenceNo);\r
break;\r
}\r
/**\r
Send packet with response data to HOST.\r
\r
- @param[in] Data Pointer to response data buffer.\r
- @param[in] DataSize Size of response data in byte.\r
+ @param[in] Data Pointer to response data buffer.\r
+ @param[in] DataSize Size of response data in byte.\r
+ @param[in, out] DebugHeader Pointer to a buffer for creating response packet and receiving ACK packet,\r
+ to minimize the stack usage.\r
\r
@retval RETURN_SUCCESS Response data was sent successfully.\r
\r
**/\r
RETURN_STATUS\r
SendDataResponsePacket (\r
- IN UINT8 *Data,\r
- IN UINT16 DataSize\r
- )\r
-{\r
- return ReadMemoryAndSendResponsePacket (Data, DataSize, 1);\r
-}\r
-\r
-/**\r
- Send break cause packet to HOST.\r
-\r
- @param[in] Vector Vector value of exception or interrutp.\r
- @param[in] CpuContext Pointer to save CPU context.\r
-\r
- @retval RETURN_SUCCESS Response data was sent successfully.\r
- @retval RETURN_DEVICE_ERROR Cannot receive DEBUG_COMMAND_OK from HOST.\r
-\r
-**/\r
-RETURN_STATUS\r
-SendBreakCausePacket (\r
- IN UINTN Vector,\r
- IN DEBUG_CPU_CONTEXT *CpuContext\r
+ IN UINT8 *Data,\r
+ IN UINT16 DataSize,\r
+ IN OUT DEBUG_PACKET_HEADER *DebugHeader\r
)\r
{\r
- DEBUG_DATA_RESPONSE_BREAK_CAUSE DebugDataBreakCause;\r
-\r
- DebugDataBreakCause.StopAddress = CpuContext->Eip;\r
- DebugDataBreakCause.Cause = GetBreakCause (Vector, CpuContext);\r
-\r
- return SendDataResponsePacket ((UINT8 *) &DebugDataBreakCause, (UINT16) sizeof (DEBUG_DATA_RESPONSE_BREAK_CAUSE));\r
+ return ReadMemoryAndSendResponsePacket (Data, DataSize, 1, DebugHeader);\r
}\r
\r
/**\r
// Poll Attach symbols from HOST and ack OK\r
//\r
do {\r
- DebugPortReadBuffer (Handle, &InputCharacter, 1, 0);\r
+ DebugAgentReadBuffer (Handle, &InputCharacter, 1, 0);\r
} while (InputCharacter != DEBUG_STARTING_SYMBOL_ATTACH);\r
SendAckPacket (DEBUG_COMMAND_OK);\r
\r
DEBUG_DATA_READ_MSR *MsrRegisterRead;\r
DEBUG_DATA_WRITE_MSR *MsrRegisterWrite;\r
DEBUG_DATA_CPUID *Cpuid;\r
+ DEBUG_DATA_RESPONSE_BREAK_CAUSE BreakCause;\r
DEBUG_DATA_RESPONSE_CPUID CpuidResponse;\r
DEBUG_DATA_SEARCH_SIGNATURE *SearchSignature;\r
DEBUG_DATA_RESPONSE_GET_EXCEPTION Exception;\r
DebugHeader =(DEBUG_PACKET_HEADER *) InputPacketBuffer;\r
\r
DebugAgentMsgPrint (DEBUG_AGENT_INFO, "TARGET: Try to get command from HOST...\n");\r
- Status = ReceivePacket ((UINT8 *)DebugHeader, &BreakReceived, NULL, READ_PACKET_TIMEOUT, TRUE);\r
- if (Status != RETURN_SUCCESS || (DebugHeader->Command & DEBUG_COMMAND_RESPONSE) != 0) {\r
+ Status = ReceivePacket ((UINT8 *) DebugHeader, &BreakReceived, NULL, READ_PACKET_TIMEOUT, TRUE);\r
+ if (Status != RETURN_SUCCESS || !IS_REQUEST (DebugHeader)) {\r
DebugAgentMsgPrint (DEBUG_AGENT_WARNING, "TARGET: Get command[%x] sequenceno[%x] returned status is [%x] \n", DebugHeader->Command, DebugHeader->SequenceNo, Status);\r
DebugAgentMsgPrint (DEBUG_AGENT_WARNING, "TARGET: Get command failed or it's response packet not expected! \n");\r
ReleaseMpSpinLock (&mDebugMpContext.DebugPortSpinLock);\r
if (Data8 == DEBUG_DATA_BREAK_CAUSE_IMAGE_LOAD || Data8 == DEBUG_DATA_BREAK_CAUSE_IMAGE_UNLOAD) {\r
CpuContext->Dr0 = 0;\r
}\r
- //\r
- // Clear Stepping Flag\r
- //\r
- SetDebugFlag (DEBUG_AGENT_FLAG_STEPPING, 0);\r
\r
if (!HaltDeferred) {\r
//\r
break;\r
\r
case DEBUG_COMMAND_BREAK_CAUSE:\r
-\r
+ BreakCause.StopAddress = CpuContext->Eip;\r
if (MultiProcessorDebugSupport() && ProcessorIndex != mDebugMpContext.BreakAtCpuIndex) {\r
- Status = SendBreakCausePacket (DEBUG_TIMER_VECTOR, CpuContext);\r
-\r
+ BreakCause.Cause = GetBreakCause (DEBUG_TIMER_VECTOR, CpuContext);\r
} else {\r
- Status = SendBreakCausePacket (Vector, CpuContext);\r
+ BreakCause.Cause = GetBreakCause (Vector, CpuContext);\r
}\r
-\r
+ SendDataResponsePacket ((UINT8 *) &BreakCause, (UINT16) sizeof (DEBUG_DATA_RESPONSE_BREAK_CAUSE), DebugHeader);\r
break;\r
\r
case DEBUG_COMMAND_SET_HW_BREAKPOINT:\r
}\r
\r
mDebugMpContext.BreakAtCpuIndex = (UINT32) (-1);\r
- //\r
- // Set Stepping Flag\r
- //\r
- SetDebugFlag (DEBUG_AGENT_FLAG_STEPPING, 1);\r
ReleaseMpSpinLock (&mDebugMpContext.DebugPortSpinLock);\r
//\r
// Executing stepping command directly without sending ACK packet,\r
Data64 = (UINTN) (((DEBUG_DATA_SET_SW_BREAKPOINT *) (DebugHeader + 1))->Address);\r
Data8 = *(UINT8 *) (UINTN) Data64;\r
*(UINT8 *) (UINTN) Data64 = DEBUG_SW_BREAKPOINT_SYMBOL;\r
- Status = SendDataResponsePacket ((UINT8 *) &Data8, (UINT16) sizeof (UINT8));\r
+ Status = SendDataResponsePacket ((UINT8 *) &Data8, (UINT16) sizeof (UINT8), DebugHeader);\r
break;\r
\r
case DEBUG_COMMAND_READ_MEMORY:\r
MemoryRead = (DEBUG_DATA_READ_MEMORY *) (DebugHeader + 1);\r
- Status = ReadMemoryAndSendResponsePacket ((UINT8 *) (UINTN) MemoryRead->Address, MemoryRead->Count, MemoryRead->Width);\r
+ Status = ReadMemoryAndSendResponsePacket ((UINT8 *) (UINTN) MemoryRead->Address, MemoryRead->Count, MemoryRead->Width, DebugHeader);\r
break;\r
\r
case DEBUG_COMMAND_WRITE_MEMORY:\r
default:\r
Data64 = (UINT64) -1;\r
}\r
- Status = SendDataResponsePacket ((UINT8 *) &Data64, IoRead->Width);\r
+ Status = SendDataResponsePacket ((UINT8 *) &Data64, IoRead->Width, DebugHeader);\r
break;\r
\r
case DEBUG_COMMAND_WRITE_IO:\r
break;\r
\r
case DEBUG_COMMAND_READ_ALL_REGISTERS:\r
- Status = SendDataResponsePacket ((UINT8 *) CpuContext, sizeof (*CpuContext));\r
+ Status = SendDataResponsePacket ((UINT8 *) CpuContext, sizeof (*CpuContext), DebugHeader);\r
break;\r
\r
case DEBUG_COMMAND_READ_REGISTER:\r
\r
if (RegisterRead->Index <= SOFT_DEBUGGER_REGISTER_MAX) {\r
RegisterBuffer = ArchReadRegisterBuffer (CpuContext, RegisterRead->Index, &Width);\r
- Status = SendDataResponsePacket (RegisterBuffer, Width);\r
+ Status = SendDataResponsePacket (RegisterBuffer, Width, DebugHeader);\r
} else {\r
Status = RETURN_UNSUPPORTED;\r
}\r
\r
case DEBUG_COMMAND_ARCH_MODE:\r
Data8 = DEBUG_ARCH_SYMBOL;\r
- Status = SendDataResponsePacket ((UINT8 *) &Data8, (UINT16) sizeof (UINT8));\r
+ Status = SendDataResponsePacket ((UINT8 *) &Data8, (UINT16) sizeof (UINT8), DebugHeader);\r
break;\r
\r
case DEBUG_COMMAND_READ_MSR:\r
MsrRegisterRead = (DEBUG_DATA_READ_MSR *) (DebugHeader + 1);\r
Data64 = AsmReadMsr64 (MsrRegisterRead->Index);\r
- Status = SendDataResponsePacket ((UINT8 *) &Data64, (UINT16) sizeof (UINT64));\r
+ Status = SendDataResponsePacket ((UINT8 *) &Data64, (UINT16) sizeof (UINT64), DebugHeader);\r
break;\r
\r
case DEBUG_COMMAND_WRITE_MSR:\r
case DEBUG_COMMAND_GET_REVISION:\r
DebugAgentRevision.Revision = DEBUG_AGENT_REVISION;\r
DebugAgentRevision.Capabilities = DEBUG_AGENT_CAPABILITIES;\r
- Status = SendDataResponsePacket ((UINT8 *) &DebugAgentRevision, (UINT16) sizeof (DEBUG_DATA_RESPONSE_GET_REVISION));\r
+ Status = SendDataResponsePacket ((UINT8 *) &DebugAgentRevision, (UINT16) sizeof (DEBUG_DATA_RESPONSE_GET_REVISION), DebugHeader);\r
break;\r
\r
case DEBUG_COMMAND_GET_EXCEPTION:\r
Exception.ExceptionNum = (UINT8) Vector;\r
Exception.ExceptionData = (UINT32) CpuContext->ExceptionData;\r
- Status = SendDataResponsePacket ((UINT8 *) &Exception, (UINT16) sizeof (DEBUG_DATA_RESPONSE_GET_EXCEPTION));\r
+ Status = SendDataResponsePacket ((UINT8 *) &Exception, (UINT16) sizeof (DEBUG_DATA_RESPONSE_GET_EXCEPTION), DebugHeader);\r
break;\r
\r
case DEBUG_COMMAND_SET_VIEWPOINT:\r
\r
case DEBUG_COMMAND_GET_VIEWPOINT:\r
Data32 = mDebugMpContext.ViewPointIndex;\r
- SendDataResponsePacket((UINT8 *) &Data32, (UINT16) sizeof (UINT32));\r
+ SendDataResponsePacket((UINT8 *) &Data32, (UINT16) sizeof (UINT32), DebugHeader);\r
break;\r
\r
case DEBUG_COMMAND_MEMORY_READY:\r
Data8 = (UINT8) GetDebugFlag (DEBUG_AGENT_FLAG_MEMORY_READY);\r
- SendDataResponsePacket (&Data8, (UINT16) sizeof (UINT8));\r
+ SendDataResponsePacket (&Data8, (UINT16) sizeof (UINT8), DebugHeader);\r
break;\r
\r
case DEBUG_COMMAND_DETACH:\r
&CpuidResponse.Eax, &CpuidResponse.Ebx,\r
&CpuidResponse.Ecx, &CpuidResponse.Edx\r
);\r
- SendDataResponsePacket ((UINT8 *) &CpuidResponse, (UINT16) sizeof (CpuidResponse));\r
+ SendDataResponsePacket ((UINT8 *) &CpuidResponse, (UINT16) sizeof (CpuidResponse), DebugHeader);\r
break;\r
\r
case DEBUG_COMMAND_SEARCH_SIGNATURE:\r
Data64 = (UINT64) -1;\r
}\r
}\r
- SendDataResponsePacket ((UINT8 *) &Data64, (UINT16) sizeof (Data64));\r
+ SendDataResponsePacket ((UINT8 *) &Data64, (UINT16) sizeof (Data64), DebugHeader);\r
} else {\r
Status = RETURN_UNSUPPORTED;\r
}\r
// Check if this exception is issued by Debug Agent itself\r
// If yes, fill the debug agent exception buffer and LongJump() back to\r
// the saved CPU content in CommandCommunication()\r
+ // If exception is issued when executing Stepping, will be handled in\r
+ // exception handle procedure.\r
//\r
if (GetDebugFlag (DEBUG_AGENT_FLAG_AGENT_IN_PROGRESS) == 1) {\r
- DebugAgentMsgPrint (DEBUG_AGENT_ERROR, "Debug agent meet one Exception, ExceptionNum is %d, EIP = 0x%x.\n", Vector, (UINTN)CpuContext->Eip);\r
+ DebugAgentMsgPrint (\r
+ DEBUG_AGENT_ERROR,\r
+ "Debug agent meet one Exception, ExceptionNum is %d, EIP = 0x%x.\n",\r
+ Vector,\r
+ (UINTN)CpuContext->Eip\r
+ );\r
ExceptionBuffer = (DEBUG_AGENT_EXCEPTION_BUFFER *) (UINTN) GetMailboxPointer()->ExceptionBufferPointer;\r
ExceptionBuffer->ExceptionContent.ExceptionNum = (UINT8) Vector;\r
ExceptionBuffer->ExceptionContent.ExceptionData = (UINT32) CpuContext->ExceptionData;\r
if (MultiProcessorDebugSupport()) {\r
mDebugMpContext.BreakAtCpuIndex = ProcessorIndex;\r
}\r
+ //\r
+ // Clear Stepping Flag and restore EFLAGS.IF\r
+ //\r
+ CommandSteppingCleanup (CpuContext);\r
SendAckPacket (DEBUG_COMMAND_OK);\r
CommandCommunication (Vector, CpuContext, BreakReceived);\r
break;\r
//\r
CurrentDebugTimerInitCount = GetApicTimerInitCount ();\r
if (mDebugMpContext.DebugTimerInitCount != CurrentDebugTimerInitCount) {\r
- InitializeDebugTimer ();\r
+ InitializeDebugTimer (NULL);\r
}\r
}\r
\r
\r
default:\r
if (Vector <= DEBUG_EXCEPT_SIMD) {\r
+ DebugAgentMsgPrint (\r
+ DEBUG_AGENT_ERROR,\r
+ "Exception happened, ExceptionNum is %d, EIP = 0x%x.\n",\r
+ Vector,\r
+ (UINTN) CpuContext->Eip\r
+ );\r
if (BreakCause == DEBUG_DATA_BREAK_CAUSE_STEPPING) {\r
//\r
- // Stepping is finished, send Ack package.\r
+ // If exception happened when executing Stepping, send Ack package.\r
+ // HOST consider Stepping command was finished.\r
//\r
if (MultiProcessorDebugSupport()) {\r
mDebugMpContext.BreakAtCpuIndex = ProcessorIndex;\r
}\r
+ //\r
+ // Clear Stepping flag and restore EFLAGS.IF\r
+ //\r
+ CommandSteppingCleanup (CpuContext);\r
SendAckPacket (DEBUG_COMMAND_OK);\r
} else {\r
//\r
projects / mirror_edk2.git / blobdiff