PeiServicesLib|MdePkg/Library/PeiServicesLib/PeiServicesLib.inf\r
BaseMemoryLib|MdePkg/Library/BaseMemoryLib/BaseMemoryLib.inf\r
MemoryAllocationLib|MdePkg/Library/PeiMemoryAllocationLib/PeiMemoryAllocationLib.inf\r
- ReportStatusCodeLib|IntelFrameworkPkg/Library/PeiReportStatusCodeLib/PeiReportStatusCodeLib.inf\r
+ ReportStatusCodeLib|IntelFrameworkModulePkg/Library/PeiReportStatusCodeLib/PeiReportStatusCodeLib.inf\r
\r
[LibraryClasses.common.DXE_DRIVER]\r
HobLib|MdePkg/Library/DxeHobLib/DxeHobLib.inf\r
UefiLib|MdePkg/Library/UefiLib/UefiLib.inf\r
UefiRuntimeServicesTableLib|MdePkg/Library/UefiRuntimeServicesTableLib/UefiRuntimeServicesTableLib.inf\r
DxeServicesTableLib|MdePkg/Library/DxeServicesTableLib/DxeServicesTableLib.inf\r
- ReportStatusCodeLib|IntelFrameworkPkg/Library/DxeReportStatusCodeLibFramework/DxeReportStatusCodeLib.inf\r
+ ReportStatusCodeLib|IntelFrameworkModulePkg/Library/DxeReportStatusCodeLibFramework/DxeReportStatusCodeLib.inf\r
HiiLibFramework|IntelFrameworkPkg/Library/HiiLibFramework/HiiLib.inf\r
IfrSupportLibFramework|IntelFrameworkPkg/Library/IfrSupportLibFramework/IfrSupportLib.inf\r
PciIncompatibleDeviceSupportLib|IntelFrameworkModulePkg/Library/PciIncompatibleDeviceSupportLib/PciIncompatibleDeviceSupportLib.inf\r
UefiLib|MdePkg/Library/UefiLib/UefiLib.inf\r
UefiRuntimeLib|MdePkg/Library/UefiRuntimeLib/UefiRuntimeLib.inf\r
UefiRuntimeServicesTableLib|MdePkg/Library/UefiRuntimeServicesTableLib/UefiRuntimeServicesTableLib.inf\r
- ReportStatusCodeLib|IntelFrameworkPkg/Library/DxeReportStatusCodeLibFramework/DxeReportStatusCodeLib.inf\r
+ ReportStatusCodeLib|IntelFrameworkModulePkg/Library/DxeReportStatusCodeLibFramework/DxeReportStatusCodeLib.inf\r
HiiLibFramework|IntelFrameworkPkg/Library/HiiLibFramework/HiiLib.inf\r
IfrSupportLibFramework|IntelFrameworkPkg/Library/IfrSupportLibFramework/IfrSupportLib.inf\r
IoLib|MdePkg/Library/BaseIoLibIntrinsic/BaseIoLibIntrinsic.inf\r
IntelFrameworkModulePkg/Universal/PcatSingleSegmentPciCfgPei/PcatSingleSegmentPciCfgPei.inf\r
IntelFrameworkModulePkg/Bus/Pci/VgaMiniPortDxe/VgaMiniPortDxe.inf\r
\r
+ IntelFrameworkModulePkg/Library/PeiReportStatusCodeLib/PeiReportStatusCodeLib.inf\r
+ IntelFrameworkModulePkg/Library/DxeReportStatusCodeLibFramework/DxeReportStatusCodeLib.inf\r
+ IntelFrameworkModulePkg/Library/BaseReportStatusCodeLib/BaseReportStatusCodeLib.inf\r
+ IntelFrameworkModulePkg/Library/PeiDxeDebugLibReportStatusCode/PeiDxeDebugLibReportStatusCode.inf\r
+\r
+\r
[Components.IA32]\r
IntelFrameworkModulePkg/Universal/StatusCode/Dxe/DxeStatusCode.inf\r
\r
--- /dev/null
+/** @file\r
+ Report Status Code Library for DXE Phase.\r
+\r
+ Copyright (c) 2006 - 2007, Intel Corporation<BR>\r
+ All rights reserved. This program and the accompanying materials\r
+ are licensed and made available under the terms and conditions of the BSD License\r
+ which accompanies this distribution. The full text of the license may be found at\r
+ http://opensource.org/licenses/bsd-license.php\r
+\r
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,\r
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.\r
+\r
+**/\r
+\r
+\r
+#include <Base.h>\r
+#include <Framework/StatusCodeDataTypeId.h>\r
+#include <Framework/StatusCode.h>\r
+\r
+#include <Guid/StatusCodeDataTypeId.h>\r
+#include <Library/ReportStatusCodeLib.h>\r
+#include <Library/DebugLib.h>\r
+#include <Library/BaseLib.h>\r
+#include <Library/BaseMemoryLib.h>\r
+#include <Library/PcdLib.h>\r
+\r
+#include <DebugInfo.h>\r
+\r
+/**\r
+ Internal worker function that reports a status code through the Status Code Protocol\r
+\r
+ This function checks to see if a Status Code Protocol is present in the handle\r
+ database. If a Status Code Protocol is not present, then EFI_UNSUPPORTED is\r
+ returned. If a Status Code Protocol is present, then it is cached in gStatusCode,\r
+ and the ReportStatusCode() service of the Status Code Protocol is called passing in\r
+ Type, Value, Instance, CallerId, and Data. The result of this call is returned.\r
+\r
+ @param Type Status code type.\r
+ @param Value Status code value.\r
+ @param Instance Status code instance number.\r
+ @param CallerId Pointer to a GUID that identifies the caller of this\r
+ function. This is an optional parameter that may be\r
+ NULL.\r
+ @param Data Pointer to the extended data buffer. This is an\r
+ optional parameter that may be NULL.\r
+\r
+ @retval EFI_SUCCESS The status code was reported.\r
+ @retval EFI_OUT_OF_RESOURCES There were not enough resources to report the status code.\r
+ @retval EFI_UNSUPPORTED Status Code Protocol is not available.\r
+\r
+**/\r
+STATIC\r
+EFI_STATUS\r
+InternalReportStatusCode (\r
+ IN EFI_STATUS_CODE_TYPE Type,\r
+ IN EFI_STATUS_CODE_VALUE Value,\r
+ IN UINT32 Instance,\r
+ IN CONST EFI_GUID *CallerId OPTIONAL,\r
+ IN EFI_STATUS_CODE_DATA *Data OPTIONAL\r
+ )\r
+{\r
+ return EFI_SUCCESS;\r
+}\r
+\r
+\r
+/**\r
+ Computes and returns the size, in bytes, of a device path.\r
+\r
+ @param DevicePath A pointer to a device path.\r
+\r
+ @return The size, in bytes, of DevicePath.\r
+\r
+**/\r
+STATIC\r
+UINTN\r
+InternalReportStatusCodeDevicePathSize (\r
+ IN CONST EFI_DEVICE_PATH_PROTOCOL *DevicePath\r
+ )\r
+{\r
+ CONST EFI_DEVICE_PATH_PROTOCOL *Start;\r
+\r
+ //\r
+ // Search for the end of the device path structure\r
+ //\r
+ Start = DevicePath;\r
+ while (!EfiIsDevicePathEnd (DevicePath)) {\r
+ DevicePath = EfiNextDevicePathNode (DevicePath);\r
+ }\r
+\r
+ //\r
+ // Subtract the start node from the end node and add in the size of the end node\r
+ //\r
+ return ((UINTN) DevicePath - (UINTN) Start) + DevicePathNodeLength (DevicePath);\r
+}\r
+\r
+\r
+/**\r
+ Converts a status code to an 8-bit POST code value.\r
+\r
+ Converts the status code specified by CodeType and Value to an 8-bit POST code\r
+ and returns the 8-bit POST code in PostCode. If CodeType is an\r
+ EFI_PROGRESS_CODE or CodeType is an EFI_ERROR_CODE, then bits 0..4 of PostCode\r
+ are set to bits 16..20 of Value, and bits 5..7 of PostCode are set to bits\r
+ 24..26 of Value., and TRUE is returned. Otherwise, FALSE is returned.\r
+\r
+ If PostCode is NULL, then ASSERT().\r
+\r
+ @param CodeType The type of status code being converted.\r
+ @param Value The status code value being converted.\r
+ @param PostCode A pointer to the 8-bit POST code value to return.\r
+\r
+ @retval TRUE The status code specified by CodeType and Value was converted\r
+ to an 8-bit POST code and returned in PostCode.\r
+ @retval FALSE The status code specified by CodeType and Value could not be\r
+ converted to an 8-bit POST code value.\r
+\r
+**/\r
+BOOLEAN\r
+EFIAPI\r
+CodeTypeToPostCode (\r
+ IN EFI_STATUS_CODE_TYPE CodeType,\r
+ IN EFI_STATUS_CODE_VALUE Value,\r
+ OUT UINT8 *PostCode\r
+ )\r
+{\r
+ //\r
+ // If PostCode is NULL, then ASSERT()\r
+ //\r
+ ASSERT (PostCode != NULL);\r
+\r
+ //\r
+ // Convert Value to an 8 bit post code\r
+ //\r
+ if (((CodeType & EFI_STATUS_CODE_TYPE_MASK) == EFI_PROGRESS_CODE) ||\r
+ ((CodeType & EFI_STATUS_CODE_TYPE_MASK) == EFI_ERROR_CODE) ) {\r
+ *PostCode = (UINT8) ((((Value & EFI_STATUS_CODE_CLASS_MASK) >> 24) << 5) |\r
+ (((Value & EFI_STATUS_CODE_SUBCLASS_MASK) >> 16) & 0x1f));\r
+ return TRUE;\r
+ }\r
+ return FALSE;\r
+}\r
+\r
+\r
+/**\r
+ Extracts ASSERT() information from a status code structure.\r
+\r
+ Converts the status code specified by CodeType, Value, and Data to the ASSERT()\r
+ arguments specified by Filename, Description, and LineNumber. If CodeType is\r
+ an EFI_ERROR_CODE, and CodeType has a severity of EFI_ERROR_UNRECOVERED, and\r
+ Value has an operation mask of EFI_SW_EC_ILLEGAL_SOFTWARE_STATE, extract\r
+ Filename, Description, and LineNumber from the optional data area of the\r
+ status code buffer specified by Data. The optional data area of Data contains\r
+ a Null-terminated ASCII string for the FileName, followed by a Null-terminated\r
+ ASCII string for the Description, followed by a 32-bit LineNumber. If the\r
+ ASSERT() information could be extracted from Data, then return TRUE.\r
+ Otherwise, FALSE is returned.\r
+\r
+ If Data is NULL, then ASSERT().\r
+ If Filename is NULL, then ASSERT().\r
+ If Description is NULL, then ASSERT().\r
+ If LineNumber is NULL, then ASSERT().\r
+\r
+ @param CodeType The type of status code being converted.\r
+ @param Value The status code value being converted.\r
+ @param Data Pointer to status code data buffer.\r
+ @param Filename Pointer to the source file name that generated the ASSERT().\r
+ @param Description Pointer to the description of the ASSERT().\r
+ @param LineNumber Pointer to source line number that generated the ASSERT().\r
+\r
+ @retval TRUE The status code specified by CodeType, Value, and Data was\r
+ converted ASSERT() arguments specified by Filename, Description,\r
+ and LineNumber.\r
+ @retval FALSE The status code specified by CodeType, Value, and Data could\r
+ not be converted to ASSERT() arguments.\r
+\r
+**/\r
+BOOLEAN\r
+EFIAPI\r
+ReportStatusCodeExtractAssertInfo (\r
+ IN EFI_STATUS_CODE_TYPE CodeType,\r
+ IN EFI_STATUS_CODE_VALUE Value,\r
+ IN CONST EFI_STATUS_CODE_DATA *Data,\r
+ OUT CHAR8 **Filename,\r
+ OUT CHAR8 **Description,\r
+ OUT UINT32 *LineNumber\r
+ )\r
+{\r
+ EFI_DEBUG_ASSERT_DATA *AssertData;\r
+\r
+ ASSERT (Data != NULL);\r
+ ASSERT (Filename != NULL);\r
+ ASSERT (Description != NULL);\r
+ ASSERT (LineNumber != NULL);\r
+\r
+ if (((CodeType & EFI_STATUS_CODE_TYPE_MASK) == EFI_ERROR_CODE) &&\r
+ ((CodeType & EFI_STATUS_CODE_SEVERITY_MASK) == EFI_ERROR_UNRECOVERED) &&\r
+ ((Value & EFI_STATUS_CODE_OPERATION_MASK) == EFI_SW_EC_ILLEGAL_SOFTWARE_STATE)) {\r
+ AssertData = (EFI_DEBUG_ASSERT_DATA *)(Data + 1);\r
+ *Filename = (CHAR8 *)(AssertData + 1);\r
+ *Description = *Filename + AsciiStrLen (*Filename) + 1;\r
+ *LineNumber = AssertData->LineNumber;\r
+ return TRUE;\r
+ }\r
+ return FALSE;\r
+}\r
+\r
+\r
+/**\r
+ Extracts DEBUG() information from a status code structure.\r
+\r
+ Converts the status code specified by Data to the DEBUG() arguments specified\r
+ by ErrorLevel, Marker, and Format. If type GUID in Data is\r
+ EFI_STATUS_CODE_DATA_TYPE_DEBUG_GUID, then extract ErrorLevel, Marker, and\r
+ Format from the optional data area of the status code buffer specified by Data.\r
+ The optional data area of Data contains a 32-bit ErrorLevel followed by Marker\r
+ which is 12 UINTN parameters, followed by a Null-terminated ASCII string for\r
+ the Format. If the DEBUG() information could be extracted from Data, then\r
+ return TRUE. Otherwise, FALSE is returned.\r
+\r
+ If Data is NULL, then ASSERT().\r
+ If ErrorLevel is NULL, then ASSERT().\r
+ If Marker is NULL, then ASSERT().\r
+ If Format is NULL, then ASSERT().\r
+\r
+ @param Data Pointer to status code data buffer.\r
+ @param ErrorLevel Pointer to error level mask for a debug message.\r
+ @param Marker Pointer to the variable argument list associated with Format.\r
+ @param Format Pointer to a Null-terminated ASCII format string of a\r
+ debug message.\r
+\r
+ @retval TRUE The status code specified by Data was converted DEBUG() arguments\r
+ specified by ErrorLevel, Marker, and Format.\r
+ @retval FALSE The status code specified by Data could not be converted to\r
+ DEBUG() arguments.\r
+\r
+**/\r
+BOOLEAN\r
+EFIAPI\r
+ReportStatusCodeExtractDebugInfo (\r
+ IN CONST EFI_STATUS_CODE_DATA *Data,\r
+ OUT UINT32 *ErrorLevel,\r
+ OUT VA_LIST *Marker,\r
+ OUT CHAR8 **Format\r
+ )\r
+{\r
+ EFI_DEBUG_INFO *DebugInfo;\r
+\r
+ ASSERT (Data != NULL);\r
+ ASSERT (ErrorLevel != NULL);\r
+ ASSERT (Marker != NULL);\r
+ ASSERT (Format != NULL);\r
+\r
+ //\r
+ // If the GUID type is not EFI_STATUS_CODE_DATA_TYPE_DEBUG_GUID then return FALSE\r
+ //\r
+ if (!CompareGuid (&Data->Type, &gEfiStatusCodeDataTypeDebugGuid)) {\r
+ return FALSE;\r
+ }\r
+\r
+ //\r
+ // Retrieve the debug information from the status code record\r
+ //\r
+ DebugInfo = (EFI_DEBUG_INFO *)(Data + 1);\r
+\r
+ *ErrorLevel = DebugInfo->ErrorLevel;\r
+\r
+ //\r
+ // The first 12 * UINTN bytes of the string are really an\r
+ // argument stack to support varargs on the Format string.\r
+ //\r
+ *Marker = (VA_LIST) (DebugInfo + 1);\r
+ *Format = (CHAR8 *)(((UINT64 *)*Marker) + 12);\r
+\r
+ return TRUE;\r
+}\r
+\r
+\r
+/**\r
+ Reports a status code.\r
+\r
+ Reports the status code specified by the parameters Type and Value. Status\r
+ code also require an instance, caller ID, and extended data. This function\r
+ passed in a zero instance, NULL extended data, and a caller ID of\r
+ gEfiCallerIdGuid, which is the GUID for the module.\r
+\r
+ ReportStatusCode()must actively prevent recusrsion. If ReportStatusCode()\r
+ is called while processing another any other Report Status Code Library function,\r
+ then ReportStatusCode() must return immediately.\r
+\r
+ @param Type Status code type.\r
+ @param Value Status code value.\r
+\r
+ @retval EFI_SUCCESS The status code was reported.\r
+ @retval EFI_DEVICE_ERROR There status code could not be reported due to a\r
+ device error.\r
+ @retval EFI_UNSUPPORTED Report status code is not supported\r
+\r
+**/\r
+EFI_STATUS\r
+EFIAPI\r
+ReportStatusCode (\r
+ IN EFI_STATUS_CODE_TYPE Type,\r
+ IN EFI_STATUS_CODE_VALUE Value\r
+ )\r
+{\r
+ return InternalReportStatusCode (Type, Value, 0, &gEfiCallerIdGuid, NULL);\r
+}\r
+\r
+\r
+/**\r
+ Reports a status code with a Device Path Protocol as the extended data.\r
+\r
+ Allocates and fills in the extended data section of a status code with the\r
+ Device Path Protocol specified by DevicePath. This function is responsible\r
+ for allocating a buffer large enough for the standard header and the device\r
+ path. The standard header is filled in with a GUID of\r
+ gEfiStatusCodeSpecificDataGuid. The status code is reported with a zero\r
+ instance and a caller ID of gEfiCallerIdGuid.\r
+\r
+ ReportStatusCodeWithDevicePath()must actively prevent recursion. If\r
+ ReportStatusCodeWithDevicePath() is called while processing another any other\r
+ Report Status Code Library function, then ReportStatusCodeWithDevicePath()\r
+ must return EFI_DEVICE_ERROR immediately.\r
+\r
+ If DevicePath is NULL, then ASSERT().\r
+\r
+ @param Type Status code type.\r
+ @param Value Status code value.\r
+ @param DevicePath Pointer to the Device Path Protocol to be reported.\r
+\r
+ @retval EFI_SUCCESS The status code was reported with the extended\r
+ data specified by DevicePath.\r
+ @retval EFI_OUT_OF_RESOURCES There were not enough resources to allocate the\r
+ extended data section.\r
+ @retval EFI_UNSUPPORTED Report status code is not supported\r
+\r
+**/\r
+EFI_STATUS\r
+EFIAPI\r
+ReportStatusCodeWithDevicePath (\r
+ IN EFI_STATUS_CODE_TYPE Type,\r
+ IN EFI_STATUS_CODE_VALUE Value,\r
+ IN CONST EFI_DEVICE_PATH_PROTOCOL *DevicePath\r
+ )\r
+{\r
+ ASSERT (DevicePath != NULL);\r
+ return ReportStatusCodeWithExtendedData (\r
+ Type,\r
+ Value,\r
+ (VOID *)DevicePath,\r
+ InternalReportStatusCodeDevicePathSize (DevicePath)\r
+ );\r
+}\r
+\r
+\r
+/**\r
+ Reports a status code with an extended data buffer.\r
+\r
+ Allocates and fills in the extended data section of a status code with the\r
+ extended data specified by ExtendedData and ExtendedDataSize. ExtendedData\r
+ is assumed to be one of the data structures specified in Related Definitions.\r
+ These data structure do not have the standard header, so this function is\r
+ responsible for allocating a buffer large enough for the standard header and\r
+ the extended data passed into this function. The standard header is filled\r
+ in with a GUID of gEfiStatusCodeSpecificDataGuid. The status code is reported\r
+ with a zero instance and a caller ID of gEfiCallerIdGuid.\r
+\r
+ ReportStatusCodeWithExtendedData()must actively prevent recursion. If\r
+ ReportStatusCodeWithExtendedData() is called while processing another any other\r
+ Report Status Code Library function, then ReportStatusCodeWithExtendedData()\r
+ must return EFI_DEVICE_ERROR immediately.\r
+\r
+ If ExtendedData is NULL, then ASSERT().\r
+ If ExtendedDataSize is 0, then ASSERT().\r
+\r
+ @param Type Status code type.\r
+ @param Value Status code value.\r
+ @param ExtendedData Pointer to the extended data buffer to be reported.\r
+ @param ExtendedDataSize The size, in bytes, of the extended data buffer to\r
+ be reported.\r
+\r
+ @retval EFI_SUCCESS The status code was reported with the extended\r
+ data specified by ExtendedData and ExtendedDataSize.\r
+ @retval EFI_OUT_OF_RESOURCES There were not enough resources to allocate the\r
+ extended data section.\r
+ @retval EFI_UNSUPPORTED Report status code is not supported\r
+\r
+**/\r
+EFI_STATUS\r
+EFIAPI\r
+ReportStatusCodeWithExtendedData (\r
+ IN EFI_STATUS_CODE_TYPE Type,\r
+ IN EFI_STATUS_CODE_VALUE Value,\r
+ IN CONST VOID *ExtendedData,\r
+ IN UINTN ExtendedDataSize\r
+ )\r
+{\r
+ ASSERT (ExtendedData != NULL);\r
+ ASSERT (ExtendedDataSize != 0);\r
+ return ReportStatusCodeEx (\r
+ Type,\r
+ Value,\r
+ 0,\r
+ NULL,\r
+ NULL,\r
+ ExtendedData,\r
+ ExtendedDataSize\r
+ );\r
+}\r
+\r
+\r
+/**\r
+ Reports a status code with full parameters.\r
+\r
+ The function reports a status code. If ExtendedData is NULL and ExtendedDataSize\r
+ is 0, then an extended data buffer is not reported. If ExtendedData is not\r
+ NULL and ExtendedDataSize is not 0, then an extended data buffer is allocated.\r
+ ExtendedData is assumed not have the standard status code header, so this function\r
+ is responsible for allocating a buffer large enough for the standard header and\r
+ the extended data passed into this function. The standard header is filled in\r
+ with a GUID specified by ExtendedDataGuid. If ExtendedDataGuid is NULL, then a\r
+ GUID of gEfiStatusCodeSpecificDatauid is used. The status code is reported with\r
+ an instance specified by Instance and a caller ID specified by CallerId. If\r
+ CallerId is NULL, then a caller ID of gEfiCallerIdGuid is used.\r
+\r
+ ReportStatusCodeEx()must actively prevent recursion. If ReportStatusCodeEx()\r
+ is called while processing another any other Report Status Code Library function,\r
+ then ReportStatusCodeEx() must return EFI_DEVICE_ERROR immediately.\r
+\r
+ If ExtendedData is NULL and ExtendedDataSize is not zero, then ASSERT().\r
+ If ExtendedData is not NULL and ExtendedDataSize is zero, then ASSERT().\r
+\r
+ @param Type Status code type.\r
+ @param Value Status code value.\r
+ @param Instance Status code instance number.\r
+ @param CallerId Pointer to a GUID that identifies the caller of this\r
+ function. If this parameter is NULL, then a caller\r
+ ID of gEfiCallerIdGuid is used.\r
+ @param ExtendedDataGuid Pointer to the GUID for the extended data buffer.\r
+ If this parameter is NULL, then a the status code\r
+ standard header is filled in with\r
+ gEfiStatusCodeSpecificDataGuid.\r
+ @param ExtendedData Pointer to the extended data buffer. This is an\r
+ optional parameter that may be NULL.\r
+ @param ExtendedDataSize The size, in bytes, of the extended data buffer.\r
+\r
+ @retval EFI_SUCCESS The status code was reported.\r
+ @retval EFI_OUT_OF_RESOURCES There were not enough resources to allocate\r
+ the extended data section if it was specified.\r
+ @retval EFI_UNSUPPORTED Report status code is not supported\r
+\r
+**/\r
+EFI_STATUS\r
+EFIAPI\r
+ReportStatusCodeEx (\r
+ IN EFI_STATUS_CODE_TYPE Type,\r
+ IN EFI_STATUS_CODE_VALUE Value,\r
+ IN UINT32 Instance,\r
+ IN CONST EFI_GUID *CallerId OPTIONAL,\r
+ IN CONST EFI_GUID *ExtendedDataGuid OPTIONAL,\r
+ IN CONST VOID *ExtendedData OPTIONAL,\r
+ IN UINTN ExtendedDataSize\r
+ )\r
+{\r
+ return EFI_SUCCESS;\r
+}\r
+\r
+\r
+/**\r
+ Returns TRUE if status codes of type EFI_PROGRESS_CODE are enabled\r
+\r
+ This function returns TRUE if the REPORT_STATUS_CODE_PROPERTY_PROGRESS_CODE_ENABLED\r
+ bit of PcdReportStatusCodeProperyMask is set. Otherwise FALSE is returned.\r
+\r
+ @retval TRUE The REPORT_STATUS_CODE_PROPERTY_PROGRESS_CODE_ENABLED bit of\r
+ PcdReportStatusCodeProperyMask is set.\r
+ @retval FALSE The REPORT_STATUS_CODE_PROPERTY_PROGRESS_CODE_ENABLED bit of\r
+ PcdReportStatusCodeProperyMask is clear.\r
+\r
+**/\r
+BOOLEAN\r
+EFIAPI\r
+ReportProgressCodeEnabled (\r
+ VOID\r
+ )\r
+{\r
+ return (BOOLEAN) ((PcdGet8(PcdReportStatusCodePropertyMask) & REPORT_STATUS_CODE_PROPERTY_PROGRESS_CODE_ENABLED) != 0);\r
+}\r
+\r
+\r
+/**\r
+ Returns TRUE if status codes of type EFI_ERROR_CODE are enabled\r
+\r
+ This function returns TRUE if the REPORT_STATUS_CODE_PROPERTY_ERROR_CODE_ENABLED\r
+ bit of PcdReportStatusCodeProperyMask is set. Otherwise FALSE is returned.\r
+\r
+ @retval TRUE The REPORT_STATUS_CODE_PROPERTY_ERROR_CODE_ENABLED bit of\r
+ PcdReportStatusCodeProperyMask is set.\r
+ @retval FALSE The REPORT_STATUS_CODE_PROPERTY_ERROR_CODE_ENABLED bit of\r
+ PcdReportStatusCodeProperyMask is clear.\r
+\r
+**/\r
+BOOLEAN\r
+EFIAPI\r
+ReportErrorCodeEnabled (\r
+ VOID\r
+ )\r
+{\r
+ return (BOOLEAN) ((PcdGet8(PcdReportStatusCodePropertyMask) & REPORT_STATUS_CODE_PROPERTY_ERROR_CODE_ENABLED) != 0);\r
+}\r
+\r
+\r
+/**\r
+ Returns TRUE if status codes of type EFI_DEBUG_CODE are enabled\r
+\r
+ This function returns TRUE if the REPORT_STATUS_CODE_PROPERTY_DEBUG_CODE_ENABLED\r
+ bit of PcdReportStatusCodeProperyMask is set. Otherwise FALSE is returned.\r
+\r
+ @retval TRUE The REPORT_STATUS_CODE_PROPERTY_DEBUG_CODE_ENABLED bit of\r
+ PcdReportStatusCodeProperyMask is set.\r
+ @retval FALSE The REPORT_STATUS_CODE_PROPERTY_DEBUG_CODE_ENABLED bit of\r
+ PcdReportStatusCodeProperyMask is clear.\r
+\r
+**/\r
+BOOLEAN\r
+EFIAPI\r
+ReportDebugCodeEnabled (\r
+ VOID\r
+ )\r
+{\r
+ return (BOOLEAN) ((PcdGet8(PcdReportStatusCodePropertyMask) & REPORT_STATUS_CODE_PROPERTY_DEBUG_CODE_ENABLED) != 0);\r
+}\r
--- /dev/null
+#/** @file\r
+# DXE report status code library\r
+#\r
+# Retrieve status code and report status code in DXE phase\r
+# Copyright (c) 2006 - 2007, Intel Corporation.\r
+#\r
+# All rights reserved. This program and the accompanying materials\r
+# are licensed and made available under the terms and conditions of the BSD License\r
+# which accompanies this distribution. The full text of the license may be found at\r
+# http://opensource.org/licenses/bsd-license.php\r
+# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,\r
+# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.\r
+#\r
+#\r
+#**/\r
+\r
+[Defines]\r
+ INF_VERSION = 0x00010005\r
+ BASE_NAME = BaseReportStatusCodeLib\r
+ FILE_GUID = 1DE0B8C2-FFB6-4bdf-97F5-0FFB33979038\r
+ MODULE_TYPE = BASE\r
+ VERSION_STRING = 1.0\r
+ LIBRARY_CLASS = ReportStatusCodeLib|BASE SEC USER_DEFINED\r
+ EDK_RELEASE_VERSION = 0x00020000\r
+ EFI_SPECIFICATION_VERSION = 0x00020000\r
+\r
+\r
+#\r
+# The following information is for reference only and not required by the build tools.\r
+#\r
+# VALID_ARCHITECTURES = IA32 X64 IPF EBC\r
+#\r
+\r
+[Sources.common]\r
+ BaseReportStatusCodeLib.c\r
+\r
+\r
+\r
+[Packages]\r
+ MdePkg/MdePkg.dec\r
+ IntelFrameworkPkg/IntelFrameworkPkg.dec\r
+ IntelFrameworkModulePkg/IntelFrameworkModulePkg.dec\r
+\r
+[LibraryClasses]\r
+ PcdLib\r
+ BaseMemoryLib\r
+ BaseLib\r
+ DebugLib\r
+\r
+\r
+[Guids]\r
+ gEfiStatusCodeSpecificDataGuid # ALWAYS_CONSUMED\r
+ gEfiStatusCodeDataTypeDebugGuid # ALWAYS_CONSUMED\r
+\r
+\r
+[PcdsFixedAtBuild.common]\r
+ PcdReportStatusCodePropertyMask|gEfiMdePkgTokenSpaceGuid\r
+\r
--- /dev/null
+<?xml version="1.0" encoding="UTF-8"?>\r
+<ModuleSurfaceArea xmlns="http://www.TianoCore.org/2006/Edk2.0" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">\r
+ <MsaHeader>\r
+ <ModuleName>DxeReportStatusCodeLib</ModuleName>\r
+ <ModuleType>BASE</ModuleType>\r
+ <GuidValue>1DE0B8C2-FFB6-4bdf-97F5-0FFB33979038</GuidValue>\r
+ <Version>1.0</Version>\r
+ <Abstract>DXE report status code library</Abstract>\r
+ <Description>Retrieve status code and report status code in DXE phase</Description>\r
+ <Copyright>Copyright (c) 2006 - 2007, Intel Corporation.</Copyright>\r
+ <License>All rights reserved. This program and the accompanying materials
+ are licensed and made available under the terms and conditions of the BSD License
+ which accompanies this distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.</License>\r
+ <Specification>FRAMEWORK_BUILD_PACKAGING_SPECIFICATION 0x00000052</Specification>\r
+ </MsaHeader>\r
+ <ModuleDefinitions>\r
+ <SupportedArchitectures>IA32 X64 IPF EBC</SupportedArchitectures>\r
+ <BinaryModule>false</BinaryModule>\r
+ <OutputFileBasename>BaseReportStatusCodeLib</OutputFileBasename>\r
+ </ModuleDefinitions>\r
+ <LibraryClassDefinitions>\r
+ <LibraryClass Usage="ALWAYS_PRODUCED" SupModuleList="BASE">\r
+ <Keyword>ReportStatusCodeLib</Keyword>\r
+ </LibraryClass>\r
+ <LibraryClass Usage="ALWAYS_CONSUMED">\r
+ <Keyword>DebugLib</Keyword>\r
+ </LibraryClass>\r
+ <LibraryClass Usage="ALWAYS_CONSUMED">\r
+ <Keyword>BaseLib</Keyword>\r
+ </LibraryClass>\r
+ <LibraryClass Usage="ALWAYS_CONSUMED">\r
+ <Keyword>BaseMemoryLib</Keyword>\r
+ </LibraryClass>\r
+ <LibraryClass Usage="ALWAYS_CONSUMED">\r
+ <Keyword>PcdLib</Keyword>\r
+ </LibraryClass>\r
+ </LibraryClassDefinitions>\r
+ <SourceFiles>\r
+ <Filename>BaseReportStatusCodeLib.c</Filename>\r
+ </SourceFiles>\r
+ <PackageDependencies>\r
+ <Package PackageGuid="5e0e9358-46b6-4ae2-8218-4ab8b9bbdcec"/>\r
+ </PackageDependencies>\r
+ <Guids>\r
+ <GuidCNames Usage="ALWAYS_CONSUMED">\r
+ <GuidCName>gEfiStatusCodeDataTypeDebugGuid</GuidCName>\r
+ </GuidCNames>\r
+ <GuidCNames Usage="ALWAYS_CONSUMED">\r
+ <GuidCName>gEfiStatusCodeSpecificDataGuid</GuidCName>\r
+ </GuidCNames>\r
+ </Guids>\r
+ <Externs>\r
+ <Specification>EFI_SPECIFICATION_VERSION 0x00020000</Specification>\r
+ <Specification>EDK_RELEASE_VERSION 0x00020000</Specification>\r
+ </Externs>\r
+ <PcdCoded>\r
+ <PcdEntry PcdItemType="FIXED_AT_BUILD">\r
+ <C_Name>PcdReportStatusCodePropertyMask</C_Name>\r
+ <TokenSpaceGuidCName>gEfiMdePkgTokenSpaceGuid</TokenSpaceGuidCName>\r
+ <HelpText>The bitmask of flags that specify the enable/disable of
+ Progress Code, Error Code and Debug Code.</HelpText>\r
+ </PcdEntry>\r
+ </PcdCoded>\r
+</ModuleSurfaceArea>
\ No newline at end of file
--- /dev/null
+#/** @file\r
+# DXE report status code library\r
+#\r
+# Retrieve status code and report status code in DXE phase\r
+# Copyright (c) 2006 - 2007, Intel Corporation.\r
+#\r
+# All rights reserved. This program and the accompanying materials\r
+# are licensed and made available under the terms and conditions of the BSD License\r
+# which accompanies this distribution. The full text of the license may be found at\r
+# http://opensource.org/licenses/bsd-license.php\r
+# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,\r
+# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.\r
+#\r
+#\r
+#**/\r
+\r
+[Defines]\r
+ INF_VERSION = 0x00010005\r
+ BASE_NAME = DxeReportStatusCodeLib\r
+ FILE_GUID = 3ddc3b12-99ea-4364-b315-6310a2050be5\r
+ MODULE_TYPE = DXE_DRIVER\r
+ VERSION_STRING = 1.0\r
+ LIBRARY_CLASS = ReportStatusCodeLib|DXE_CORE DXE_DRIVER DXE_RUNTIME_DRIVER DXE_SAL_DRIVER DXE_SMM_DRIVER UEFI_APPLICATION UEFI_DRIVER\r
+ EDK_RELEASE_VERSION = 0x00020000\r
+ EFI_SPECIFICATION_VERSION = 0x00020000\r
+\r
+\r
+#\r
+# The following information is for reference only and not required by the build tools.\r
+#\r
+# VALID_ARCHITECTURES = IA32 X64 IPF EBC\r
+#\r
+\r
+[Sources.common]\r
+ ReportStatusCodeLib.c\r
+\r
+\r
+\r
+[Packages]\r
+ MdePkg/MdePkg.dec\r
+ IntelFrameworkPkg/IntelFrameworkPkg.dec\r
+ IntelFrameworkModulePkg/IntelFrameworkModulePkg.dec\r
+\r
+[LibraryClasses]\r
+ PcdLib\r
+ BaseMemoryLib\r
+ BaseLib\r
+ UefiBootServicesTableLib\r
+ DebugLib\r
+ UefiRuntimeServicesTableLib\r
+\r
+\r
+[Guids]\r
+ gEfiStatusCodeSpecificDataGuid # ALWAYS_CONSUMED\r
+ gEfiStatusCodeDataTypeDebugGuid # ALWAYS_CONSUMED\r
+\r
+\r
+[Protocols]\r
+ gEfiStatusCodeRuntimeProtocolGuid # PROTOCOL ALWAYS_CONSUMED\r
+\r
+\r
+[PcdsFixedAtBuild.common]\r
+ PcdReportStatusCodePropertyMask|gEfiMdePkgTokenSpaceGuid\r
+\r
--- /dev/null
+<?xml version="1.0" encoding="UTF-8"?>\r
+<ModuleSurfaceArea xmlns="http://www.TianoCore.org/2006/Edk2.0" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">\r
+ <MsaHeader>\r
+ <ModuleName>DxeReportStatusCodeLib</ModuleName>\r
+ <ModuleType>DXE_DRIVER</ModuleType>\r
+ <GuidValue>3ddc3b12-99ea-4364-b315-6310a2050be5</GuidValue>\r
+ <Version>1.0</Version>\r
+ <Abstract>DXE report status code library</Abstract>\r
+ <Description>Retrieve status code and report status code in DXE phase</Description>\r
+ <Copyright>Copyright (c) 2006 - 2007, Intel Corporation.</Copyright>\r
+ <License>All rights reserved. This program and the accompanying materials
+ are licensed and made available under the terms and conditions of the BSD License
+ which accompanies this distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.</License>\r
+ <Specification>FRAMEWORK_BUILD_PACKAGING_SPECIFICATION 0x00000052</Specification>\r
+ </MsaHeader>\r
+ <ModuleDefinitions>\r
+ <SupportedArchitectures>IA32 X64 IPF EBC</SupportedArchitectures>\r
+ <BinaryModule>false</BinaryModule>\r
+ <OutputFileBasename>DxeReportStatusCodeLib</OutputFileBasename>\r
+ </ModuleDefinitions>\r
+ <LibraryClassDefinitions>\r
+ <LibraryClass Usage="ALWAYS_PRODUCED" SupModuleList="DXE_CORE DXE_DRIVER DXE_RUNTIME_DRIVER DXE_SAL_DRIVER DXE_SMM_DRIVER UEFI_APPLICATION UEFI_DRIVER">\r
+ <Keyword>ReportStatusCodeLib</Keyword>\r
+ </LibraryClass>\r
+ <LibraryClass Usage="ALWAYS_CONSUMED">\r
+ <Keyword>DebugLib</Keyword>\r
+ </LibraryClass>\r
+ <LibraryClass Usage="ALWAYS_CONSUMED">\r
+ <Keyword>UefiBootServicesTableLib</Keyword>\r
+ </LibraryClass>\r
+ <LibraryClass Usage="ALWAYS_CONSUMED">\r
+ <Keyword>BaseLib</Keyword>\r
+ </LibraryClass>\r
+ <LibraryClass Usage="ALWAYS_CONSUMED">\r
+ <Keyword>BaseMemoryLib</Keyword>\r
+ </LibraryClass>\r
+ <LibraryClass Usage="ALWAYS_CONSUMED">\r
+ <Keyword>PcdLib</Keyword>\r
+ </LibraryClass>\r
+ <LibraryClass Usage="ALWAYS_CONSUMED">\r
+ <Keyword>UefiRuntimeServicesTableLib</Keyword>\r
+ </LibraryClass>\r
+ </LibraryClassDefinitions>\r
+ <SourceFiles>\r
+ <Filename>ReportStatusCodeLib.c</Filename>\r
+ </SourceFiles>\r
+ <PackageDependencies>\r
+ <Package PackageGuid="5e0e9358-46b6-4ae2-8218-4ab8b9bbdcec"/>\r
+ </PackageDependencies>\r
+ <Protocols>\r
+ <Protocol Usage="ALWAYS_CONSUMED">\r
+ <ProtocolCName>gEfiStatusCodeRuntimeProtocolGuid</ProtocolCName>\r
+ </Protocol>\r
+ </Protocols>\r
+ <Guids>\r
+ <GuidCNames Usage="ALWAYS_CONSUMED">\r
+ <GuidCName>gEfiStatusCodeDataTypeDebugGuid</GuidCName>\r
+ </GuidCNames>\r
+ <GuidCNames Usage="ALWAYS_CONSUMED">\r
+ <GuidCName>gEfiStatusCodeSpecificDataGuid</GuidCName>\r
+ </GuidCNames>\r
+ </Guids>\r
+ <Externs>\r
+ <Specification>EFI_SPECIFICATION_VERSION 0x00020000</Specification>\r
+ <Specification>EDK_RELEASE_VERSION 0x00020000</Specification>\r
+ </Externs>\r
+ <PcdCoded>\r
+ <PcdEntry PcdItemType="FIXED_AT_BUILD">\r
+ <C_Name>PcdReportStatusCodePropertyMask</C_Name>\r
+ <TokenSpaceGuidCName>gEfiMdePkgTokenSpaceGuid</TokenSpaceGuidCName>\r
+ <HelpText>The bitmask of flags that specify the enable/disable of
+ Progress Code, Error Code and Debug Code.</HelpText>\r
+ </PcdEntry>\r
+ </PcdCoded>\r
+</ModuleSurfaceArea>
\ No newline at end of file
--- /dev/null
+/** @file\r
+ Report Status Code Library for DXE Phase.\r
+\r
+ Copyright (c) 2006 - 2007, Intel Corporation<BR>\r
+ All rights reserved. This program and the accompanying materials\r
+ are licensed and made available under the terms and conditions of the BSD License\r
+ which accompanies this distribution. The full text of the license may be found at\r
+ http://opensource.org/licenses/bsd-license.php\r
+\r
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,\r
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.\r
+\r
+**/\r
+\r
+\r
+#include <FrameworkDxe.h>\r
+\r
+#include <Guid/StatusCodeDataTypeId.h>\r
+#include <Protocol/StatusCode.h>\r
+\r
+#include <Library/ReportStatusCodeLib.h>\r
+#include <Library/DebugLib.h>\r
+#include <Library/UefiBootServicesTableLib.h>\r
+#include <Library/BaseLib.h>\r
+#include <Library/BaseMemoryLib.h>\r
+#include <Library/PcdLib.h>\r
+#include <Library/UefiRuntimeServicesTableLib.h>\r
+\r
+#include <DebugInfo.h>\r
+\r
+/**\r
+ Internal worker function that reports a status code through the Status Code Protocol\r
+\r
+ This function checks to see if a Status Code Protocol is present in the handle\r
+ database. If a Status Code Protocol is not present, then EFI_UNSUPPORTED is\r
+ returned. If a Status Code Protocol is present, then it is cached in gStatusCode,\r
+ and the ReportStatusCode() service of the Status Code Protocol is called passing in\r
+ Type, Value, Instance, CallerId, and Data. The result of this call is returned.\r
+\r
+ @param Type Status code type.\r
+ @param Value Status code value.\r
+ @param Instance Status code instance number.\r
+ @param CallerId Pointer to a GUID that identifies the caller of this\r
+ function. This is an optional parameter that may be\r
+ NULL.\r
+ @param Data Pointer to the extended data buffer. This is an\r
+ optional parameter that may be NULL.\r
+\r
+ @retval EFI_SUCCESS The status code was reported.\r
+ @retval EFI_OUT_OF_RESOURCES There were not enough resources to report the status code.\r
+ @retval EFI_UNSUPPORTED Status Code Protocol is not available.\r
+\r
+**/\r
+STATIC\r
+EFI_STATUS\r
+InternalReportStatusCode (\r
+ IN EFI_STATUS_CODE_TYPE Type,\r
+ IN EFI_STATUS_CODE_VALUE Value,\r
+ IN UINT32 Instance,\r
+ IN CONST EFI_GUID *CallerId OPTIONAL,\r
+ IN EFI_STATUS_CODE_DATA *Data OPTIONAL\r
+ )\r
+{\r
+ EFI_STATUS Status;\r
+ EFI_STATUS_CODE_PROTOCOL *StatusCode;\r
+ STATIC EFI_REPORT_STATUS_CODE ReportStatusCode = NULL;\r
+\r
+ //\r
+ // If gStatusCode is NULL, then see if a Status Code Protocol instance is present\r
+ // in the handle database.\r
+ //\r
+ if (ReportStatusCode == NULL) {\r
+ if (gBS == NULL) {\r
+ return EFI_UNSUPPORTED;\r
+ }\r
+ Status = gBS->LocateProtocol (&gEfiStatusCodeRuntimeProtocolGuid, NULL, (VOID**)&StatusCode);\r
+ if (!EFI_ERROR (Status) && StatusCode != NULL) {\r
+ ReportStatusCode = StatusCode->ReportStatusCode;\r
+ } else if (gRT->Hdr.Revision < 0x20000) {\r
+ ReportStatusCode = ((FRAMEWORK_EFI_RUNTIME_SERVICES*)gRT)->ReportStatusCode;\r
+ } else {\r
+ return EFI_UNSUPPORTED;\r
+ }\r
+ }\r
+\r
+ //\r
+ // A Status Code Protocol is present in the handle database, so pass in all the\r
+ // parameters to the ReportStatusCode() service of the Status Code Protocol\r
+ //\r
+ return (*ReportStatusCode) (Type, Value, Instance, (EFI_GUID *)CallerId, Data);\r
+}\r
+\r
+\r
+/**\r
+ Computes and returns the size, in bytes, of a device path.\r
+\r
+ @param DevicePath A pointer to a device path.\r
+\r
+ @return The size, in bytes, of DevicePath.\r
+\r
+**/\r
+STATIC\r
+UINTN\r
+InternalReportStatusCodeDevicePathSize (\r
+ IN CONST EFI_DEVICE_PATH_PROTOCOL *DevicePath\r
+ )\r
+{\r
+ CONST EFI_DEVICE_PATH_PROTOCOL *Start;\r
+\r
+ //\r
+ // Search for the end of the device path structure\r
+ //\r
+ Start = DevicePath;\r
+ while (!EfiIsDevicePathEnd (DevicePath)) {\r
+ DevicePath = EfiNextDevicePathNode (DevicePath);\r
+ }\r
+\r
+ //\r
+ // Subtract the start node from the end node and add in the size of the end node\r
+ //\r
+ return ((UINTN) DevicePath - (UINTN) Start) + DevicePathNodeLength (DevicePath);\r
+}\r
+\r
+\r
+/**\r
+ Converts a status code to an 8-bit POST code value.\r
+\r
+ Converts the status code specified by CodeType and Value to an 8-bit POST code\r
+ and returns the 8-bit POST code in PostCode. If CodeType is an\r
+ EFI_PROGRESS_CODE or CodeType is an EFI_ERROR_CODE, then bits 0..4 of PostCode\r
+ are set to bits 16..20 of Value, and bits 5..7 of PostCode are set to bits\r
+ 24..26 of Value., and TRUE is returned. Otherwise, FALSE is returned.\r
+\r
+ If PostCode is NULL, then ASSERT().\r
+\r
+ @param CodeType The type of status code being converted.\r
+ @param Value The status code value being converted.\r
+ @param PostCode A pointer to the 8-bit POST code value to return.\r
+\r
+ @retval TRUE The status code specified by CodeType and Value was converted\r
+ to an 8-bit POST code and returned in PostCode.\r
+ @retval FALSE The status code specified by CodeType and Value could not be\r
+ converted to an 8-bit POST code value.\r
+\r
+**/\r
+BOOLEAN\r
+EFIAPI\r
+CodeTypeToPostCode (\r
+ IN EFI_STATUS_CODE_TYPE CodeType,\r
+ IN EFI_STATUS_CODE_VALUE Value,\r
+ OUT UINT8 *PostCode\r
+ )\r
+{\r
+ //\r
+ // If PostCode is NULL, then ASSERT()\r
+ //\r
+ ASSERT (PostCode != NULL);\r
+\r
+ //\r
+ // Convert Value to an 8 bit post code\r
+ //\r
+ if (((CodeType & EFI_STATUS_CODE_TYPE_MASK) == EFI_PROGRESS_CODE) ||\r
+ ((CodeType & EFI_STATUS_CODE_TYPE_MASK) == EFI_ERROR_CODE) ) {\r
+ *PostCode = (UINT8) ((((Value & EFI_STATUS_CODE_CLASS_MASK) >> 24) << 5) |\r
+ (((Value & EFI_STATUS_CODE_SUBCLASS_MASK) >> 16) & 0x1f));\r
+ return TRUE;\r
+ }\r
+ return FALSE;\r
+}\r
+\r
+\r
+/**\r
+ Extracts ASSERT() information from a status code structure.\r
+\r
+ Converts the status code specified by CodeType, Value, and Data to the ASSERT()\r
+ arguments specified by Filename, Description, and LineNumber. If CodeType is\r
+ an EFI_ERROR_CODE, and CodeType has a severity of EFI_ERROR_UNRECOVERED, and\r
+ Value has an operation mask of EFI_SW_EC_ILLEGAL_SOFTWARE_STATE, extract\r
+ Filename, Description, and LineNumber from the optional data area of the\r
+ status code buffer specified by Data. The optional data area of Data contains\r
+ a Null-terminated ASCII string for the FileName, followed by a Null-terminated\r
+ ASCII string for the Description, followed by a 32-bit LineNumber. If the\r
+ ASSERT() information could be extracted from Data, then return TRUE.\r
+ Otherwise, FALSE is returned.\r
+\r
+ If Data is NULL, then ASSERT().\r
+ If Filename is NULL, then ASSERT().\r
+ If Description is NULL, then ASSERT().\r
+ If LineNumber is NULL, then ASSERT().\r
+\r
+ @param CodeType The type of status code being converted.\r
+ @param Value The status code value being converted.\r
+ @param Data Pointer to status code data buffer.\r
+ @param Filename Pointer to the source file name that generated the ASSERT().\r
+ @param Description Pointer to the description of the ASSERT().\r
+ @param LineNumber Pointer to source line number that generated the ASSERT().\r
+\r
+ @retval TRUE The status code specified by CodeType, Value, and Data was\r
+ converted ASSERT() arguments specified by Filename, Description,\r
+ and LineNumber.\r
+ @retval FALSE The status code specified by CodeType, Value, and Data could\r
+ not be converted to ASSERT() arguments.\r
+\r
+**/\r
+BOOLEAN\r
+EFIAPI\r
+ReportStatusCodeExtractAssertInfo (\r
+ IN EFI_STATUS_CODE_TYPE CodeType,\r
+ IN EFI_STATUS_CODE_VALUE Value,\r
+ IN CONST EFI_STATUS_CODE_DATA *Data,\r
+ OUT CHAR8 **Filename,\r
+ OUT CHAR8 **Description,\r
+ OUT UINT32 *LineNumber\r
+ )\r
+{\r
+ EFI_DEBUG_ASSERT_DATA *AssertData;\r
+\r
+ ASSERT (Data != NULL);\r
+ ASSERT (Filename != NULL);\r
+ ASSERT (Description != NULL);\r
+ ASSERT (LineNumber != NULL);\r
+\r
+ if (((CodeType & EFI_STATUS_CODE_TYPE_MASK) == EFI_ERROR_CODE) &&\r
+ ((CodeType & EFI_STATUS_CODE_SEVERITY_MASK) == EFI_ERROR_UNRECOVERED) &&\r
+ ((Value & EFI_STATUS_CODE_OPERATION_MASK) == EFI_SW_EC_ILLEGAL_SOFTWARE_STATE)) {\r
+ AssertData = (EFI_DEBUG_ASSERT_DATA *)(Data + 1);\r
+ *Filename = (CHAR8 *)(AssertData + 1);\r
+ *Description = *Filename + AsciiStrLen (*Filename) + 1;\r
+ *LineNumber = AssertData->LineNumber;\r
+ return TRUE;\r
+ }\r
+ return FALSE;\r
+}\r
+\r
+\r
+/**\r
+ Extracts DEBUG() information from a status code structure.\r
+\r
+ Converts the status code specified by Data to the DEBUG() arguments specified\r
+ by ErrorLevel, Marker, and Format. If type GUID in Data is\r
+ EFI_STATUS_CODE_DATA_TYPE_DEBUG_GUID, then extract ErrorLevel, Marker, and\r
+ Format from the optional data area of the status code buffer specified by Data.\r
+ The optional data area of Data contains a 32-bit ErrorLevel followed by Marker\r
+ which is 12 UINTN parameters, followed by a Null-terminated ASCII string for\r
+ the Format. If the DEBUG() information could be extracted from Data, then\r
+ return TRUE. Otherwise, FALSE is returned.\r
+\r
+ If Data is NULL, then ASSERT().\r
+ If ErrorLevel is NULL, then ASSERT().\r
+ If Marker is NULL, then ASSERT().\r
+ If Format is NULL, then ASSERT().\r
+\r
+ @param Data Pointer to status code data buffer.\r
+ @param ErrorLevel Pointer to error level mask for a debug message.\r
+ @param Marker Pointer to the variable argument list associated with Format.\r
+ @param Format Pointer to a Null-terminated ASCII format string of a\r
+ debug message.\r
+\r
+ @retval TRUE The status code specified by Data was converted DEBUG() arguments\r
+ specified by ErrorLevel, Marker, and Format.\r
+ @retval FALSE The status code specified by Data could not be converted to\r
+ DEBUG() arguments.\r
+\r
+**/\r
+BOOLEAN\r
+EFIAPI\r
+ReportStatusCodeExtractDebugInfo (\r
+ IN CONST EFI_STATUS_CODE_DATA *Data,\r
+ OUT UINT32 *ErrorLevel,\r
+ OUT VA_LIST *Marker,\r
+ OUT CHAR8 **Format\r
+ )\r
+{\r
+ EFI_DEBUG_INFO *DebugInfo;\r
+\r
+ ASSERT (Data != NULL);\r
+ ASSERT (ErrorLevel != NULL);\r
+ ASSERT (Marker != NULL);\r
+ ASSERT (Format != NULL);\r
+\r
+ //\r
+ // If the GUID type is not EFI_STATUS_CODE_DATA_TYPE_DEBUG_GUID then return FALSE\r
+ //\r
+ if (!CompareGuid (&Data->Type, &gEfiStatusCodeDataTypeDebugGuid)) {\r
+ return FALSE;\r
+ }\r
+\r
+ //\r
+ // Retrieve the debug information from the status code record\r
+ //\r
+ DebugInfo = (EFI_DEBUG_INFO *)(Data + 1);\r
+\r
+ *ErrorLevel = DebugInfo->ErrorLevel;\r
+\r
+ //\r
+ // The first 12 * UINTN bytes of the string are really an\r
+ // argument stack to support varargs on the Format string.\r
+ //\r
+ *Marker = (VA_LIST) (DebugInfo + 1);\r
+ *Format = (CHAR8 *)(((UINT64 *)*Marker) + 12);\r
+\r
+ return TRUE;\r
+}\r
+\r
+\r
+/**\r
+ Reports a status code.\r
+\r
+ Reports the status code specified by the parameters Type and Value. Status\r
+ code also require an instance, caller ID, and extended data. This function\r
+ passed in a zero instance, NULL extended data, and a caller ID of\r
+ gEfiCallerIdGuid, which is the GUID for the module.\r
+\r
+ ReportStatusCode()must actively prevent recusrsion. If ReportStatusCode()\r
+ is called while processing another any other Report Status Code Library function,\r
+ then ReportStatusCode() must return immediately.\r
+\r
+ @param Type Status code type.\r
+ @param Value Status code value.\r
+\r
+ @retval EFI_SUCCESS The status code was reported.\r
+ @retval EFI_DEVICE_ERROR There status code could not be reported due to a\r
+ device error.\r
+ @retval EFI_UNSUPPORTED Report status code is not supported\r
+\r
+**/\r
+EFI_STATUS\r
+EFIAPI\r
+ReportStatusCode (\r
+ IN EFI_STATUS_CODE_TYPE Type,\r
+ IN EFI_STATUS_CODE_VALUE Value\r
+ )\r
+{\r
+ return InternalReportStatusCode (Type, Value, 0, &gEfiCallerIdGuid, NULL);\r
+}\r
+\r
+\r
+/**\r
+ Reports a status code with a Device Path Protocol as the extended data.\r
+\r
+ Allocates and fills in the extended data section of a status code with the\r
+ Device Path Protocol specified by DevicePath. This function is responsible\r
+ for allocating a buffer large enough for the standard header and the device\r
+ path. The standard header is filled in with a GUID of\r
+ gEfiStatusCodeSpecificDataGuid. The status code is reported with a zero\r
+ instance and a caller ID of gEfiCallerIdGuid.\r
+\r
+ ReportStatusCodeWithDevicePath()must actively prevent recursion. If\r
+ ReportStatusCodeWithDevicePath() is called while processing another any other\r
+ Report Status Code Library function, then ReportStatusCodeWithDevicePath()\r
+ must return EFI_DEVICE_ERROR immediately.\r
+\r
+ If DevicePath is NULL, then ASSERT().\r
+\r
+ @param Type Status code type.\r
+ @param Value Status code value.\r
+ @param DevicePath Pointer to the Device Path Protocol to be reported.\r
+\r
+ @retval EFI_SUCCESS The status code was reported with the extended\r
+ data specified by DevicePath.\r
+ @retval EFI_OUT_OF_RESOURCES There were not enough resources to allocate the\r
+ extended data section.\r
+ @retval EFI_UNSUPPORTED Report status code is not supported\r
+\r
+**/\r
+EFI_STATUS\r
+EFIAPI\r
+ReportStatusCodeWithDevicePath (\r
+ IN EFI_STATUS_CODE_TYPE Type,\r
+ IN EFI_STATUS_CODE_VALUE Value,\r
+ IN CONST EFI_DEVICE_PATH_PROTOCOL *DevicePath\r
+ )\r
+{\r
+ ASSERT (DevicePath != NULL);\r
+ return ReportStatusCodeWithExtendedData (\r
+ Type,\r
+ Value,\r
+ (VOID *)DevicePath,\r
+ InternalReportStatusCodeDevicePathSize (DevicePath)\r
+ );\r
+}\r
+\r
+\r
+/**\r
+ Reports a status code with an extended data buffer.\r
+\r
+ Allocates and fills in the extended data section of a status code with the\r
+ extended data specified by ExtendedData and ExtendedDataSize. ExtendedData\r
+ is assumed to be one of the data structures specified in Related Definitions.\r
+ These data structure do not have the standard header, so this function is\r
+ responsible for allocating a buffer large enough for the standard header and\r
+ the extended data passed into this function. The standard header is filled\r
+ in with a GUID of gEfiStatusCodeSpecificDataGuid. The status code is reported\r
+ with a zero instance and a caller ID of gEfiCallerIdGuid.\r
+\r
+ ReportStatusCodeWithExtendedData()must actively prevent recursion. If\r
+ ReportStatusCodeWithExtendedData() is called while processing another any other\r
+ Report Status Code Library function, then ReportStatusCodeWithExtendedData()\r
+ must return EFI_DEVICE_ERROR immediately.\r
+\r
+ If ExtendedData is NULL, then ASSERT().\r
+ If ExtendedDataSize is 0, then ASSERT().\r
+\r
+ @param Type Status code type.\r
+ @param Value Status code value.\r
+ @param ExtendedData Pointer to the extended data buffer to be reported.\r
+ @param ExtendedDataSize The size, in bytes, of the extended data buffer to\r
+ be reported.\r
+\r
+ @retval EFI_SUCCESS The status code was reported with the extended\r
+ data specified by ExtendedData and ExtendedDataSize.\r
+ @retval EFI_OUT_OF_RESOURCES There were not enough resources to allocate the\r
+ extended data section.\r
+ @retval EFI_UNSUPPORTED Report status code is not supported\r
+\r
+**/\r
+EFI_STATUS\r
+EFIAPI\r
+ReportStatusCodeWithExtendedData (\r
+ IN EFI_STATUS_CODE_TYPE Type,\r
+ IN EFI_STATUS_CODE_VALUE Value,\r
+ IN CONST VOID *ExtendedData,\r
+ IN UINTN ExtendedDataSize\r
+ )\r
+{\r
+ ASSERT (ExtendedData != NULL);\r
+ ASSERT (ExtendedDataSize != 0);\r
+ return ReportStatusCodeEx (\r
+ Type,\r
+ Value,\r
+ 0,\r
+ NULL,\r
+ NULL,\r
+ ExtendedData,\r
+ ExtendedDataSize\r
+ );\r
+}\r
+\r
+\r
+/**\r
+ Reports a status code with full parameters.\r
+\r
+ The function reports a status code. If ExtendedData is NULL and ExtendedDataSize\r
+ is 0, then an extended data buffer is not reported. If ExtendedData is not\r
+ NULL and ExtendedDataSize is not 0, then an extended data buffer is allocated.\r
+ ExtendedData is assumed not have the standard status code header, so this function\r
+ is responsible for allocating a buffer large enough for the standard header and\r
+ the extended data passed into this function. The standard header is filled in\r
+ with a GUID specified by ExtendedDataGuid. If ExtendedDataGuid is NULL, then a\r
+ GUID of gEfiStatusCodeSpecificDatauid is used. The status code is reported with\r
+ an instance specified by Instance and a caller ID specified by CallerId. If\r
+ CallerId is NULL, then a caller ID of gEfiCallerIdGuid is used.\r
+\r
+ ReportStatusCodeEx()must actively prevent recursion. If ReportStatusCodeEx()\r
+ is called while processing another any other Report Status Code Library function,\r
+ then ReportStatusCodeEx() must return EFI_DEVICE_ERROR immediately.\r
+\r
+ If ExtendedData is NULL and ExtendedDataSize is not zero, then ASSERT().\r
+ If ExtendedData is not NULL and ExtendedDataSize is zero, then ASSERT().\r
+\r
+ @param Type Status code type.\r
+ @param Value Status code value.\r
+ @param Instance Status code instance number.\r
+ @param CallerId Pointer to a GUID that identifies the caller of this\r
+ function. If this parameter is NULL, then a caller\r
+ ID of gEfiCallerIdGuid is used.\r
+ @param ExtendedDataGuid Pointer to the GUID for the extended data buffer.\r
+ If this parameter is NULL, then a the status code\r
+ standard header is filled in with\r
+ gEfiStatusCodeSpecificDataGuid.\r
+ @param ExtendedData Pointer to the extended data buffer. This is an\r
+ optional parameter that may be NULL.\r
+ @param ExtendedDataSize The size, in bytes, of the extended data buffer.\r
+\r
+ @retval EFI_SUCCESS The status code was reported.\r
+ @retval EFI_OUT_OF_RESOURCES There were not enough resources to allocate\r
+ the extended data section if it was specified.\r
+ @retval EFI_UNSUPPORTED Report status code is not supported\r
+\r
+**/\r
+EFI_STATUS\r
+EFIAPI\r
+ReportStatusCodeEx (\r
+ IN EFI_STATUS_CODE_TYPE Type,\r
+ IN EFI_STATUS_CODE_VALUE Value,\r
+ IN UINT32 Instance,\r
+ IN CONST EFI_GUID *CallerId OPTIONAL,\r
+ IN CONST EFI_GUID *ExtendedDataGuid OPTIONAL,\r
+ IN CONST VOID *ExtendedData OPTIONAL,\r
+ IN UINTN ExtendedDataSize\r
+ )\r
+{\r
+ EFI_STATUS Status;\r
+ EFI_STATUS_CODE_DATA *StatusCodeData;\r
+\r
+ ASSERT (!((ExtendedData == NULL) && (ExtendedDataSize != 0)));\r
+ ASSERT (!((ExtendedData != NULL) && (ExtendedDataSize == 0)));\r
+\r
+ if (gBS == NULL) {\r
+ return EFI_UNSUPPORTED;\r
+ }\r
+\r
+ //\r
+ // Allocate space for the Status Code Header and its buffer\r
+ //\r
+ StatusCodeData = NULL;\r
+ gBS->AllocatePool (EfiBootServicesData, sizeof (EFI_STATUS_CODE_DATA) + ExtendedDataSize, (VOID **)&StatusCodeData);\r
+ if (StatusCodeData == NULL) {\r
+ return EFI_OUT_OF_RESOURCES;\r
+ }\r
+\r
+ //\r
+ // Fill in the extended data header\r
+ //\r
+ StatusCodeData->HeaderSize = sizeof (EFI_STATUS_CODE_DATA);\r
+ StatusCodeData->Size = (UINT16)ExtendedDataSize;\r
+ if (ExtendedDataGuid == NULL) {\r
+ ExtendedDataGuid = &gEfiStatusCodeSpecificDataGuid;\r
+ }\r
+ CopyGuid (&StatusCodeData->Type, ExtendedDataGuid);\r
+\r
+ //\r
+ // Fill in the extended data buffer\r
+ //\r
+ CopyMem (StatusCodeData + 1, ExtendedData, ExtendedDataSize);\r
+\r
+ //\r
+ // Report the status code\r
+ //\r
+ if (CallerId == NULL) {\r
+ CallerId = &gEfiCallerIdGuid;\r
+ }\r
+ Status = InternalReportStatusCode (Type, Value, Instance, CallerId, StatusCodeData);\r
+\r
+ //\r
+ // Free the allocated buffer\r
+ //\r
+ gBS->FreePool (StatusCodeData);\r
+\r
+ return Status;\r
+}\r
+\r
+\r
+/**\r
+ Returns TRUE if status codes of type EFI_PROGRESS_CODE are enabled\r
+\r
+ This function returns TRUE if the REPORT_STATUS_CODE_PROPERTY_PROGRESS_CODE_ENABLED\r
+ bit of PcdReportStatusCodeProperyMask is set. Otherwise FALSE is returned.\r
+\r
+ @retval TRUE The REPORT_STATUS_CODE_PROPERTY_PROGRESS_CODE_ENABLED bit of\r
+ PcdReportStatusCodeProperyMask is set.\r
+ @retval FALSE The REPORT_STATUS_CODE_PROPERTY_PROGRESS_CODE_ENABLED bit of\r
+ PcdReportStatusCodeProperyMask is clear.\r
+\r
+**/\r
+BOOLEAN\r
+EFIAPI\r
+ReportProgressCodeEnabled (\r
+ VOID\r
+ )\r
+{\r
+ return (BOOLEAN) ((PcdGet8(PcdReportStatusCodePropertyMask) & REPORT_STATUS_CODE_PROPERTY_PROGRESS_CODE_ENABLED) != 0);\r
+}\r
+\r
+\r
+/**\r
+ Returns TRUE if status codes of type EFI_ERROR_CODE are enabled\r
+\r
+ This function returns TRUE if the REPORT_STATUS_CODE_PROPERTY_ERROR_CODE_ENABLED\r
+ bit of PcdReportStatusCodeProperyMask is set. Otherwise FALSE is returned.\r
+\r
+ @retval TRUE The REPORT_STATUS_CODE_PROPERTY_ERROR_CODE_ENABLED bit of\r
+ PcdReportStatusCodeProperyMask is set.\r
+ @retval FALSE The REPORT_STATUS_CODE_PROPERTY_ERROR_CODE_ENABLED bit of\r
+ PcdReportStatusCodeProperyMask is clear.\r
+\r
+**/\r
+BOOLEAN\r
+EFIAPI\r
+ReportErrorCodeEnabled (\r
+ VOID\r
+ )\r
+{\r
+ return (BOOLEAN) ((PcdGet8(PcdReportStatusCodePropertyMask) & REPORT_STATUS_CODE_PROPERTY_ERROR_CODE_ENABLED) != 0);\r
+}\r
+\r
+\r
+/**\r
+ Returns TRUE if status codes of type EFI_DEBUG_CODE are enabled\r
+\r
+ This function returns TRUE if the REPORT_STATUS_CODE_PROPERTY_DEBUG_CODE_ENABLED\r
+ bit of PcdReportStatusCodeProperyMask is set. Otherwise FALSE is returned.\r
+\r
+ @retval TRUE The REPORT_STATUS_CODE_PROPERTY_DEBUG_CODE_ENABLED bit of\r
+ PcdReportStatusCodeProperyMask is set.\r
+ @retval FALSE The REPORT_STATUS_CODE_PROPERTY_DEBUG_CODE_ENABLED bit of\r
+ PcdReportStatusCodeProperyMask is clear.\r
+\r
+**/\r
+BOOLEAN\r
+EFIAPI\r
+ReportDebugCodeEnabled (\r
+ VOID\r
+ )\r
+{\r
+ return (BOOLEAN) ((PcdGet8(PcdReportStatusCodePropertyMask) & REPORT_STATUS_CODE_PROPERTY_DEBUG_CODE_ENABLED) != 0);\r
+}\r
--- /dev/null
+/** @file\r
+ Debug Library that fowards all messages to ReportStatusCode()\r
+\r
+ Copyright (c) 2006, Intel Corporation<BR>\r
+ All rights reserved. This program and the accompanying materials\r
+ are licensed and made available under the terms and conditions of the BSD License\r
+ which accompanies this distribution. The full text of the license may be found at\r
+ http://opensource.org/licenses/bsd-license.php\r
+\r
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,\r
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.\r
+\r
+**/\r
+\r
+\r
+\r
+#include <FrameworkPei.h>\r
+\r
+#include <Guid/StatusCodeDataTypeId.h>\r
+\r
+#include <Library/DebugLib.h>\r
+#include <Library/BaseLib.h>\r
+#include <Library/BaseMemoryLib.h>\r
+#include <Library/ReportStatusCodeLib.h>\r
+#include <Library/PcdLib.h>\r
+\r
+#include <DebugInfo.h>\r
+\r
+/**\r
+\r
+ Prints a debug message to the debug output device if the specified error level is enabled.\r
+\r
+ If any bit in ErrorLevel is also set in PcdDebugPrintErrorLevel, then print\r
+ the message specified by Format and the associated variable argument list to\r
+ the debug output device.\r
+\r
+ If Format is NULL, then ASSERT().\r
+\r
+ @param ErrorLevel The error level of the debug message.\r
+ @param Format Format string for the debug message to print.\r
+\r
+**/\r
+VOID\r
+EFIAPI\r
+DebugPrint (\r
+ IN UINTN ErrorLevel,\r
+ IN CONST CHAR8 *Format,\r
+ ...\r
+ )\r
+{\r
+ UINT64 Buffer[EFI_STATUS_CODE_DATA_MAX_SIZE / sizeof (UINT64)];\r
+ EFI_DEBUG_INFO *DebugInfo;\r
+ UINTN TotalSize;\r
+ UINTN Index;\r
+ VA_LIST Marker;\r
+ UINT64 *ArgumentPointer;\r
+\r
+ //\r
+ // If Format is NULL, then ASSERT().\r
+ //\r
+ ASSERT (Format != NULL);\r
+\r
+ //\r
+ // Check driver Debug Level value and global debug level\r
+ //\r
+ if ((ErrorLevel & PcdGet32(PcdDebugPrintErrorLevel)) == 0) {\r
+ return;\r
+ }\r
+\r
+ TotalSize = sizeof (EFI_DEBUG_INFO) + 12 * sizeof (UINT64) + AsciiStrLen (Format) + 1;\r
+ if (TotalSize > EFI_STATUS_CODE_DATA_MAX_SIZE) {\r
+ return;\r
+ }\r
+\r
+ //\r
+ // Then EFI_DEBUG_INFO\r
+ //\r
+ DebugInfo = (EFI_DEBUG_INFO *)Buffer;\r
+ DebugInfo->ErrorLevel = (UINT32)ErrorLevel;\r
+\r
+ //\r
+ // 256 byte mini Var Arg stack. That is followed by the format string.\r
+ //\r
+ VA_START (Marker, Format);\r
+ for (Index = 0, ArgumentPointer = (UINT64 *)(DebugInfo + 1); Index < 12; Index++, ArgumentPointer++) {\r
+ WriteUnaligned64(ArgumentPointer, VA_ARG (Marker, UINT64));\r
+ }\r
+ VA_END (Marker);\r
+ AsciiStrCpy ((CHAR8 *)ArgumentPointer, Format);\r
+\r
+ REPORT_STATUS_CODE_EX (\r
+ EFI_DEBUG_CODE,\r
+ (EFI_SOFTWARE_DXE_BS_DRIVER | EFI_DC_UNSPECIFIED),\r
+ 0,\r
+ NULL,\r
+ &gEfiStatusCodeDataTypeDebugGuid,\r
+ DebugInfo,\r
+ TotalSize\r
+ );\r
+}\r
+\r
+\r
+/**\r
+\r
+ Prints an assert message containing a filename, line number, and description.\r
+ This may be followed by a breakpoint or a dead loop.\r
+\r
+ Print a message of the form "ASSERT <FileName>(<LineNumber>): <Description>\n"\r
+ to the debug output device. If DEBUG_PROPERTY_ASSERT_BREAKPOINT_ENABLED bit of\r
+ PcdDebugProperyMask is set then CpuBreakpoint() is called. Otherwise, if\r
+ DEBUG_PROPERTY_ASSERT_DEADLOOP_ENABLED bit of PcdDebugProperyMask is set then\r
+ CpuDeadLoop() is called. If neither of these bits are set, then this function\r
+ returns immediately after the message is printed to the debug output device.\r
+ DebugAssert() must actively prevent recusrsion. If DebugAssert() is called while\r
+ processing another DebugAssert(), then DebugAssert() must return immediately.\r
+\r
+ If FileName is NULL, then a <FileName> string of "(NULL) Filename" is printed.\r
+\r
+ If Description is NULL, then a <Description> string of "(NULL) Description" is printed.\r
+\r
+ @param FileName Pointer to the name of the source file that generated the assert condition.\r
+ @param LineNumber The line number in the source file that generated the assert condition\r
+ @param Description Pointer to the description of the assert condition.\r
+\r
+**/\r
+VOID\r
+EFIAPI\r
+DebugAssert (\r
+ IN CONST CHAR8 *FileName,\r
+ IN UINTN LineNumber,\r
+ IN CONST CHAR8 *Description\r
+ )\r
+{\r
+ UINT64 Buffer[EFI_STATUS_CODE_DATA_MAX_SIZE / sizeof(UINT64)];\r
+ EFI_DEBUG_ASSERT_DATA *AssertData;\r
+ UINTN TotalSize;\r
+ CHAR8 *Temp;\r
+ UINTN FileNameLength;\r
+ UINTN DescriptionLength;\r
+\r
+ //\r
+ // Make sure it will all fit in the passed in buffer\r
+ //\r
+ FileNameLength = AsciiStrLen (FileName);\r
+ DescriptionLength = AsciiStrLen (Description);\r
+ TotalSize = sizeof (EFI_DEBUG_ASSERT_DATA) + FileNameLength + 1 + DescriptionLength + 1;\r
+ if (TotalSize <= EFI_STATUS_CODE_DATA_MAX_SIZE) {\r
+ //\r
+ // Fill in EFI_DEBUG_ASSERT_DATA\r
+ //\r
+ AssertData = (EFI_DEBUG_ASSERT_DATA *)Buffer;\r
+ AssertData->LineNumber = (UINT32)LineNumber;\r
+\r
+ //\r
+ // Copy Ascii FileName including NULL.\r
+ //\r
+ Temp = AsciiStrCpy ((CHAR8 *)(AssertData + 1), FileName);\r
+\r
+ //\r
+ // Copy Ascii Description\r
+ //\r
+ AsciiStrCpy (Temp + AsciiStrLen (FileName) + 1, Description);\r
+\r
+ REPORT_STATUS_CODE_WITH_EXTENDED_DATA (\r
+ (EFI_ERROR_CODE | EFI_ERROR_UNRECOVERED),\r
+ (EFI_SOFTWARE_DXE_BS_DRIVER | EFI_SW_EC_ILLEGAL_SOFTWARE_STATE),\r
+ AssertData,\r
+ TotalSize\r
+ );\r
+ }\r
+\r
+ //\r
+ // Generate a Breakpoint, DeadLoop, or NOP based on PCD settings\r
+ //\r
+ if ((PcdGet8(PcdDebugPropertyMask) & DEBUG_PROPERTY_ASSERT_BREAKPOINT_ENABLED) != 0) {\r
+ CpuBreakpoint ();\r
+ } else if ((PcdGet8(PcdDebugPropertyMask) & DEBUG_PROPERTY_ASSERT_DEADLOOP_ENABLED) != 0) {\r
+ CpuDeadLoop ();\r
+ }\r
+}\r
+\r
+\r
+/**\r
+\r
+ Fills a target buffer with PcdDebugClearMemoryValue, and returns the target buffer.\r
+\r
+ This function fills Length bytes of Buffer with the value specified by\r
+ PcdDebugClearMemoryValue, and returns Buffer.\r
+\r
+ If Buffer is NULL, then ASSERT().\r
+\r
+ If Length is greater than (MAX_ADDRESS ? Buffer + 1), then ASSERT().\r
+\r
+ @param Buffer Pointer to the target buffer to fill with PcdDebugClearMemoryValue.\r
+ @param Length Number of bytes in Buffer to fill with zeros PcdDebugClearMemoryValue.\r
+\r
+ @return Buffer\r
+\r
+**/\r
+VOID *\r
+EFIAPI\r
+DebugClearMemory (\r
+ OUT VOID *Buffer,\r
+ IN UINTN Length\r
+ )\r
+{\r
+ //\r
+ // If Buffer is NULL, then ASSERT().\r
+ //\r
+ ASSERT (Buffer != NULL);\r
+\r
+ //\r
+ // SetMem() checks for the the ASSERT() condition on Length and returns Buffer\r
+ //\r
+ return SetMem (Buffer, Length, PcdGet8(PcdDebugClearMemoryValue));\r
+}\r
+\r
+\r
+/**\r
+\r
+ Returns TRUE if ASSERT() macros are enabled.\r
+\r
+ This function returns TRUE if the DEBUG_PROPERTY_DEBUG_ASSERT_ENABLED bit of\r
+ PcdDebugProperyMask is set. Otherwise FALSE is returned.\r
+\r
+ @retval TRUE The DEBUG_PROPERTY_DEBUG_ASSERT_ENABLED bit of PcdDebugProperyMask is set.\r
+ @retval FALSE The DEBUG_PROPERTY_DEBUG_ASSERT_ENABLED bit of PcdDebugProperyMask is clear.\r
+\r
+**/\r
+BOOLEAN\r
+EFIAPI\r
+DebugAssertEnabled (\r
+ VOID\r
+ )\r
+{\r
+ return (BOOLEAN) ((PcdGet8(PcdDebugPropertyMask) & DEBUG_PROPERTY_DEBUG_ASSERT_ENABLED) != 0);\r
+}\r
+\r
+\r
+/**\r
+\r
+ Returns TRUE if DEBUG()macros are enabled.\r
+\r
+ This function returns TRUE if the DEBUG_PROPERTY_DEBUG_PRINT_ENABLED bit of\r
+ PcdDebugProperyMask is set. Otherwise FALSE is returned.\r
+\r
+ @retval TRUE The DEBUG_PROPERTY_DEBUG_PRINT_ENABLED bit of PcdDebugProperyMask is set.\r
+ @retval FALSE The DEBUG_PROPERTY_DEBUG_PRINT_ENABLED bit of PcdDebugProperyMask is clear.\r
+\r
+**/\r
+BOOLEAN\r
+EFIAPI\r
+DebugPrintEnabled (\r
+ VOID\r
+ )\r
+{\r
+ return (BOOLEAN) ((PcdGet8(PcdDebugPropertyMask) & DEBUG_PROPERTY_DEBUG_PRINT_ENABLED) != 0);\r
+}\r
+\r
+\r
+/**\r
+\r
+ Returns TRUE if DEBUG_CODE()macros are enabled.\r
+\r
+ This function returns TRUE if the DEBUG_PROPERTY_DEBUG_CODE_ENABLED bit of\r
+ PcdDebugProperyMask is set. Otherwise FALSE is returned.\r
+\r
+ @retval TRUE The DEBUG_PROPERTY_DEBUG_CODE_ENABLED bit of PcdDebugProperyMask is set.\r
+ @retval FALSE The DEBUG_PROPERTY_DEBUG_CODE_ENABLED bit of PcdDebugProperyMask is clear.\r
+\r
+**/\r
+BOOLEAN\r
+EFIAPI\r
+DebugCodeEnabled (\r
+ VOID\r
+ )\r
+{\r
+ return (BOOLEAN) ((PcdGet8(PcdDebugPropertyMask) & DEBUG_PROPERTY_DEBUG_CODE_ENABLED) != 0);\r
+}\r
+\r
+\r
+/**\r
+\r
+ Returns TRUE if DEBUG_CLEAR_MEMORY()macro is enabled.\r
+\r
+ This function returns TRUE if the DEBUG_PROPERTY_DEBUG_CLEAR_MEMORY_ENABLED bit of\r
+ PcdDebugProperyMask is set. Otherwise FALSE is returned.\r
+\r
+ @retval TRUE The DEBUG_PROPERTY_DEBUG_CLEAR_MEMORY_ENABLED bit of PcdDebugProperyMask is set.\r
+ @retval FALSE The DEBUG_PROPERTY_DEBUG_CLEAR_MEMORY_ENABLED bit of PcdDebugProperyMask is clear.\r
+\r
+**/\r
+BOOLEAN\r
+EFIAPI\r
+DebugClearMemoryEnabled (\r
+ VOID\r
+ )\r
+{\r
+ return (BOOLEAN) ((PcdGet8(PcdDebugPropertyMask) & DEBUG_PROPERTY_CLEAR_MEMORY_ENABLED) != 0);\r
+}\r
--- /dev/null
+#/** @file\r
+# Debug Library based on report status code library\r
+#\r
+# Debug Library for PEIMs and DXE drivers that send debug messages to ReportStatusCode\r
+# Copyright (c) 2006, Intel Corporation.\r
+#\r
+# All rights reserved. This program and the accompanying materials\r
+# are licensed and made available under the terms and conditions of the BSD License\r
+# which accompanies this distribution. The full text of the license may be found at\r
+# http://opensource.org/licenses/bsd-license.php\r
+# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,\r
+# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.\r
+#\r
+#\r
+#**/\r
+\r
+[Defines]\r
+ INF_VERSION = 0x00010005\r
+ BASE_NAME = PeiDxeDebugLibReportStatusCode\r
+ FILE_GUID = bda39d3a-451b-4350-8266-81ab10fa0523\r
+ MODULE_TYPE = PEIM\r
+ VERSION_STRING = 1.0\r
+ LIBRARY_CLASS = DebugLib|DXE_CORE DXE_DRIVER DXE_RUNTIME_DRIVER DXE_SAL_DRIVER DXE_SMM_DRIVER PEIM PEI_CORE UEFI_APPLICATION UEFI_DRIVER\r
+ EDK_RELEASE_VERSION = 0x00020000\r
+ EFI_SPECIFICATION_VERSION = 0x00020000\r
+\r
+\r
+#\r
+# The following information is for reference only and not required by the build tools.\r
+#\r
+# VALID_ARCHITECTURES = IA32 X64 IPF EBC\r
+#\r
+\r
+[Sources.common]\r
+ DebugLib.c\r
+\r
+\r
+[Packages]\r
+ MdePkg/MdePkg.dec\r
+ IntelFrameworkPkg/IntelFrameworkPkg.dec\r
+ IntelFrameworkModulePkg/IntelFrameworkModulePkg.dec\r
+ \r
+[LibraryClasses]\r
+ PcdLib\r
+ ReportStatusCodeLib\r
+ BaseMemoryLib\r
+ BaseLib\r
+\r
+\r
+[PcdsFixedAtBuild.common]\r
+ PcdDebugClearMemoryValue|gEfiMdePkgTokenSpaceGuid\r
+ PcdDebugPropertyMask|gEfiMdePkgTokenSpaceGuid\r
+\r
+\r
+[PcdsDynamic.common]\r
+ PcdDebugPrintErrorLevel|gEfiMdePkgTokenSpaceGuid\r
+\r
--- /dev/null
+<?xml version="1.0" encoding="UTF-8"?>\r
+<ModuleSurfaceArea xmlns="http://www.TianoCore.org/2006/Edk2.0" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">\r
+ <MsaHeader>\r
+ <ModuleName>PeiDxeDebugLibReportStatusCode</ModuleName>\r
+ <ModuleType>PEIM</ModuleType>\r
+ <GuidValue>bda39d3a-451b-4350-8266-81ab10fa0523</GuidValue>\r
+ <Version>1.0</Version>\r
+ <Abstract>Debug Library based on report status code library</Abstract>\r
+ <Description>Debug Library for PEIMs and DXE drivers that send debug messages to ReportStatusCode</Description>\r
+ <Copyright>Copyright (c) 2006, Intel Corporation.</Copyright>\r
+ <License>All rights reserved. This program and the accompanying materials
+ are licensed and made available under the terms and conditions of the BSD License
+ which accompanies this distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.</License>\r
+ <Specification>FRAMEWORK_BUILD_PACKAGING_SPECIFICATION 0x00000052</Specification>\r
+ </MsaHeader>\r
+ <ModuleDefinitions>\r
+ <SupportedArchitectures>IA32 X64 IPF EBC</SupportedArchitectures>\r
+ <BinaryModule>false</BinaryModule>\r
+ <OutputFileBasename>PeiDxeDebugLibReportStatusCode</OutputFileBasename>\r
+ </ModuleDefinitions>\r
+ <LibraryClassDefinitions>\r
+ <LibraryClass Usage="ALWAYS_PRODUCED" SupModuleList="DXE_CORE DXE_DRIVER DXE_RUNTIME_DRIVER DXE_SAL_DRIVER DXE_SMM_DRIVER PEIM PEI_CORE UEFI_APPLICATION UEFI_DRIVER">\r
+ <Keyword>DebugLib</Keyword>\r
+ </LibraryClass>\r
+ <LibraryClass Usage="ALWAYS_CONSUMED">\r
+ <Keyword>BaseLib</Keyword>\r
+ </LibraryClass>\r
+ <LibraryClass Usage="ALWAYS_CONSUMED">\r
+ <Keyword>BaseMemoryLib</Keyword>\r
+ </LibraryClass>\r
+ <LibraryClass Usage="ALWAYS_CONSUMED">\r
+ <Keyword>ReportStatusCodeLib</Keyword>\r
+ </LibraryClass>\r
+ <LibraryClass Usage="ALWAYS_CONSUMED">\r
+ <Keyword>PcdLib</Keyword>\r
+ </LibraryClass>\r
+ </LibraryClassDefinitions>\r
+ <SourceFiles>\r
+ <Filename>DebugLib.c</Filename>\r
+ </SourceFiles>\r
+ <PackageDependencies>\r
+ <Package PackageGuid="5e0e9358-46b6-4ae2-8218-4ab8b9bbdcec"/>\r
+ </PackageDependencies>\r
+ <Guids>\r
+ <GuidCNames Usage="ALWAYS_CONSUMED">\r
+ <GuidCName>gEfiStatusCodeDataTypeDebugGuid</GuidCName>\r
+ </GuidCNames>\r
+ </Guids>\r
+ <Externs>\r
+ <Specification>EFI_SPECIFICATION_VERSION 0x00020000</Specification>\r
+ <Specification>EDK_RELEASE_VERSION 0x00020000</Specification>\r
+ </Externs>\r
+ <PcdCoded>\r
+ <PcdEntry PcdItemType="FIXED_AT_BUILD">\r
+ <C_Name>PcdDebugPropertyMask</C_Name>\r
+ <TokenSpaceGuidCName>gEfiMdePkgTokenSpaceGuid</TokenSpaceGuidCName>\r
+ <HelpText>The bitmask of flags that specify the enable/disable of Debug
+ Assert, Debug Print, Debug Code, Clear Memory, Assert
+ Breakpoint and Assert Deadloop.</HelpText>\r
+ </PcdEntry>\r
+ <PcdEntry PcdItemType="FIXED_AT_BUILD">\r
+ <C_Name>PcdDebugClearMemoryValue</C_Name>\r
+ <TokenSpaceGuidCName>gEfiMdePkgTokenSpaceGuid</TokenSpaceGuidCName>\r
+ <HelpText>The value used by DebugClearMemory () to fill a certain range
+ of memory.</HelpText>\r
+ </PcdEntry>\r
+ <PcdEntry PcdItemType="DYNAMIC">\r
+ <C_Name>PcdDebugPrintErrorLevel</C_Name>\r
+ <TokenSpaceGuidCName>gEfiMdePkgTokenSpaceGuid</TokenSpaceGuidCName>\r
+ <HelpText>The bitmask of flags that specify the kind of debug message
+ output when Debug Print is enabled.</HelpText>\r
+ </PcdEntry>\r
+ </PcdCoded>\r
+</ModuleSurfaceArea>
\ No newline at end of file
--- /dev/null
+#/** @file\r
+# Report status code library\r
+#\r
+# ReportStatusCodeLib for PEIM which depends upon Pei Services table\r
+# Copyright (c) 2006 - 2007, Intel Corporation.\r
+#\r
+# All rights reserved. This program and the accompanying materials\r
+# are licensed and made available under the terms and conditions of the BSD License\r
+# which accompanies this distribution. The full text of the license may be found at\r
+# http://opensource.org/licenses/bsd-license.php\r
+# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,\r
+# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.\r
+#\r
+#\r
+#**/\r
+\r
+[Defines]\r
+ INF_VERSION = 0x00010005\r
+ BASE_NAME = PeiReportStatusCodeLib\r
+ FILE_GUID = 8c690838-7a22-45c4-aa58-a33e3e515cd4\r
+ MODULE_TYPE = PEIM\r
+ VERSION_STRING = 1.0\r
+ LIBRARY_CLASS = ReportStatusCodeLib|PEIM PEI_CORE\r
+ EDK_RELEASE_VERSION = 0x00020000\r
+ EFI_SPECIFICATION_VERSION = 0x00020000\r
+\r
+\r
+#\r
+# The following information is for reference only and not required by the build tools.\r
+#\r
+# VALID_ARCHITECTURES = IA32 X64 IPF EBC\r
+#\r
+\r
+[Sources.common]\r
+ ReportStatusCodeLib.c\r
+\r
+\r
+[Packages]\r
+ MdePkg/MdePkg.dec\r
+ IntelFrameworkPkg/IntelFrameworkPkg.dec\r
+ IntelFrameworkModulePkg/IntelFrameworkModulePkg.dec\r
+\r
+[LibraryClasses]\r
+ PcdLib\r
+ PeiServicesTablePointerLib\r
+ BaseMemoryLib\r
+ BaseLib\r
+ DebugLib\r
+\r
+\r
+[Guids]\r
+ gEfiStatusCodeSpecificDataGuid # ALWAYS_CONSUMED\r
+ gEfiStatusCodeDataTypeDebugGuid # ALWAYS_CONSUMED\r
+\r
+\r
+[PcdsFixedAtBuild.common]\r
+ PcdReportStatusCodePropertyMask|gEfiMdePkgTokenSpaceGuid\r
+\r
--- /dev/null
+<?xml version="1.0" encoding="UTF-8"?>\r
+<ModuleSurfaceArea xmlns="http://www.TianoCore.org/2006/Edk2.0" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">\r
+ <MsaHeader>\r
+ <ModuleName>PeiReportStatusCodeLib</ModuleName>\r
+ <ModuleType>PEIM</ModuleType>\r
+ <GuidValue>8c690838-7a22-45c4-aa58-a33e3e515cd4</GuidValue>\r
+ <Version>1.0</Version>\r
+ <Abstract>Report status code library</Abstract>\r
+ <Description>ReportStatusCodeLib for PEIM which depends upon Pei Services table</Description>\r
+ <Copyright>Copyright (c) 2006 - 2007, Intel Corporation.</Copyright>\r
+ <License>All rights reserved. This program and the accompanying materials
+ are licensed and made available under the terms and conditions of the BSD License
+ which accompanies this distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.</License>\r
+ <Specification>FRAMEWORK_BUILD_PACKAGING_SPECIFICATION 0x00000052</Specification>\r
+ </MsaHeader>\r
+ <ModuleDefinitions>\r
+ <SupportedArchitectures>IA32 X64 IPF EBC</SupportedArchitectures>\r
+ <BinaryModule>false</BinaryModule>\r
+ <OutputFileBasename>PeiReportStatusCodeLib</OutputFileBasename>\r
+ </ModuleDefinitions>\r
+ <LibraryClassDefinitions>\r
+ <LibraryClass Usage="ALWAYS_PRODUCED" SupModuleList="PEIM PEI_CORE">\r
+ <Keyword>ReportStatusCodeLib</Keyword>\r
+ </LibraryClass>\r
+ <LibraryClass Usage="ALWAYS_CONSUMED">\r
+ <Keyword>DebugLib</Keyword>\r
+ </LibraryClass>\r
+ <LibraryClass Usage="ALWAYS_CONSUMED">\r
+ <Keyword>BaseLib</Keyword>\r
+ </LibraryClass>\r
+ <LibraryClass Usage="ALWAYS_CONSUMED">\r
+ <Keyword>BaseMemoryLib</Keyword>\r
+ </LibraryClass>\r
+ <LibraryClass Usage="ALWAYS_CONSUMED">\r
+ <Keyword>PeiServicesTablePointerLib</Keyword>\r
+ </LibraryClass>\r
+ <LibraryClass Usage="ALWAYS_CONSUMED">\r
+ <Keyword>PcdLib</Keyword>\r
+ </LibraryClass>\r
+ </LibraryClassDefinitions>\r
+ <SourceFiles>\r
+ <Filename>ReportStatusCodeLib.c</Filename>\r
+ </SourceFiles>\r
+ <PackageDependencies>\r
+ <Package PackageGuid="5e0e9358-46b6-4ae2-8218-4ab8b9bbdcec"/>\r
+ </PackageDependencies>\r
+ <Guids>\r
+ <GuidCNames Usage="ALWAYS_CONSUMED">\r
+ <GuidCName>gEfiStatusCodeDataTypeDebugGuid</GuidCName>\r
+ </GuidCNames>\r
+ <GuidCNames Usage="ALWAYS_CONSUMED">\r
+ <GuidCName>gEfiStatusCodeSpecificDataGuid</GuidCName>\r
+ </GuidCNames>\r
+ </Guids>\r
+ <Externs>\r
+ <Specification>EFI_SPECIFICATION_VERSION 0x00020000</Specification>\r
+ <Specification>EDK_RELEASE_VERSION 0x00020000</Specification>\r
+ </Externs>\r
+ <PcdCoded>\r
+ <PcdEntry PcdItemType="FIXED_AT_BUILD">\r
+ <C_Name>PcdReportStatusCodePropertyMask</C_Name>\r
+ <TokenSpaceGuidCName>gEfiMdePkgTokenSpaceGuid</TokenSpaceGuidCName>\r
+ <HelpText>The bitmask of flags that specify the enable/disable of
+ Progress Code, Error Code and Debug Code.</HelpText>\r
+ </PcdEntry>\r
+ </PcdCoded>\r
+</ModuleSurfaceArea>
\ No newline at end of file
--- /dev/null
+/** @file\r
+ Report Status Code Library for DXE Phase.\r
+\r
+ Copyright (c) 2006, Intel Corporation<BR>\r
+ All rights reserved. This program and the accompanying materials\r
+ are licensed and made available under the terms and conditions of the BSD License\r
+ which accompanies this distribution. The full text of the license may be found at\r
+ http://opensource.org/licenses/bsd-license.php\r
+\r
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,\r
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.\r
+\r
+**/\r
+\r
+\r
+#include <FrameworkPei.h>\r
+\r
+#include <Guid/StatusCodeDataTypeId.h>\r
+\r
+#include <Library/ReportStatusCodeLib.h>\r
+#include <Library/DebugLib.h>\r
+#include <Library/BaseLib.h>\r
+#include <Library/BaseMemoryLib.h>\r
+#include <Library/PeiServicesTablePointerLib.h>\r
+#include <Library/PcdLib.h>\r
+\r
+#include <DebugInfo.h>\r
+\r
+//\r
+// Define the maximum extended data size that is supported in the PEI phase\r
+//\r
+#define MAX_EXTENDED_DATA_SIZE 0x200\r
+\r
+/**\r
+ Internal worker function that reports a status code through the Status Code Protocol\r
+\r
+ This function checks to see if a Status Code Protocol is present in the handle\r
+ database. If a Status Code Protocol is not present, then EFI_UNSUPPORTED is\r
+ returned. If a Status Code Protocol is present, then it is cached in gStatusCode,\r
+ and the ReportStatusCode() service of the Status Code Protocol is called passing in\r
+ Type, Value, Instance, CallerId, and Data. The result of this call is returned.\r
+\r
+ @param Type Status code type.\r
+ @param Value Status code value.\r
+ @param Instance Status code instance number.\r
+ @param CallerId Pointer to a GUID that identifies the caller of this\r
+ function. This is an optional parameter that may be\r
+ NULL.\r
+ @param Data Pointer to the extended data buffer. This is an\r
+ optional parameter that may be NULL.\r
+\r
+ @retval EFI_SUCCESS The status code was reported.\r
+ @retval EFI_OUT_OF_RESOURCES There were not enough resources to report the status code.\r
+ @retval EFI_UNSUPPORTED Status Code Protocol is not available.\r
+\r
+**/\r
+STATIC\r
+EFI_STATUS\r
+InternalReportStatusCode (\r
+ IN EFI_STATUS_CODE_TYPE Type,\r
+ IN EFI_STATUS_CODE_VALUE Value,\r
+ IN UINT32 Instance,\r
+ IN CONST EFI_GUID *CallerId OPTIONAL,\r
+ IN EFI_STATUS_CODE_DATA *Data OPTIONAL\r
+ )\r
+{\r
+ EFI_PEI_SERVICES **PeiServices;\r
+\r
+ PeiServices = GetPeiServicesTablePointer ();\r
+ return (*PeiServices)->ReportStatusCode (\r
+ PeiServices,\r
+ Type,\r
+ Value,\r
+ Instance,\r
+ (EFI_GUID *)CallerId,\r
+ Data\r
+ );\r
+}\r
+\r
+\r
+/**\r
+ Converts a status code to an 8-bit POST code value.\r
+\r
+ Converts the status code specified by CodeType and Value to an 8-bit POST code\r
+ and returns the 8-bit POST code in PostCode. If CodeType is an\r
+ EFI_PROGRESS_CODE or CodeType is an EFI_ERROR_CODE, then bits 0..4 of PostCode\r
+ are set to bits 16..20 of Value, and bits 5..7 of PostCode are set to bits\r
+ 24..26 of Value., and TRUE is returned. Otherwise, FALSE is returned.\r
+\r
+ If PostCode is NULL, then ASSERT().\r
+\r
+ @param CodeType The type of status code being converted.\r
+ @param Value The status code value being converted.\r
+ @param PostCode A pointer to the 8-bit POST code value to return.\r
+\r
+ @retval TRUE The status code specified by CodeType and Value was converted\r
+ to an 8-bit POST code and returned in PostCode.\r
+ @retval FALSE The status code specified by CodeType and Value could not be\r
+ converted to an 8-bit POST code value.\r
+\r
+**/\r
+BOOLEAN\r
+EFIAPI\r
+CodeTypeToPostCode (\r
+ IN EFI_STATUS_CODE_TYPE CodeType,\r
+ IN EFI_STATUS_CODE_VALUE Value,\r
+ OUT UINT8 *PostCode\r
+ )\r
+{\r
+ //\r
+ // If PostCode is NULL, then ASSERT()\r
+ //\r
+ ASSERT (PostCode != NULL);\r
+\r
+ //\r
+ // Convert Value to an 8 bit post code\r
+ //\r
+ if (((CodeType & EFI_STATUS_CODE_TYPE_MASK) == EFI_PROGRESS_CODE) ||\r
+ ((CodeType & EFI_STATUS_CODE_TYPE_MASK) == EFI_ERROR_CODE) ) {\r
+ *PostCode = (UINT8) ((((Value & EFI_STATUS_CODE_CLASS_MASK) >> 24) << 5) |\r
+ (((Value & EFI_STATUS_CODE_SUBCLASS_MASK) >> 16) & 0x1f));\r
+ return TRUE;\r
+ }\r
+ return FALSE;\r
+}\r
+\r
+\r
+/**\r
+ Extracts ASSERT() information from a status code structure.\r
+\r
+ Converts the status code specified by CodeType, Value, and Data to the ASSERT()\r
+ arguments specified by Filename, Description, and LineNumber. If CodeType is\r
+ an EFI_ERROR_CODE, and CodeType has a severity of EFI_ERROR_UNRECOVERED, and\r
+ Value has an operation mask of EFI_SW_EC_ILLEGAL_SOFTWARE_STATE, extract\r
+ Filename, Description, and LineNumber from the optional data area of the\r
+ status code buffer specified by Data. The optional data area of Data contains\r
+ a Null-terminated ASCII string for the FileName, followed by a Null-terminated\r
+ ASCII string for the Description, followed by a 32-bit LineNumber. If the\r
+ ASSERT() information could be extracted from Data, then return TRUE.\r
+ Otherwise, FALSE is returned.\r
+\r
+ If Data is NULL, then ASSERT().\r
+ If Filename is NULL, then ASSERT().\r
+ If Description is NULL, then ASSERT().\r
+ If LineNumber is NULL, then ASSERT().\r
+\r
+ @param CodeType The type of status code being converted.\r
+ @param Value The status code value being converted.\r
+ @param Data Pointer to status code data buffer.\r
+ @param Filename Pointer to the source file name that generated the ASSERT().\r
+ @param Description Pointer to the description of the ASSERT().\r
+ @param LineNumber Pointer to source line number that generated the ASSERT().\r
+\r
+ @retval TRUE The status code specified by CodeType, Value, and Data was\r
+ converted ASSERT() arguments specified by Filename, Description,\r
+ and LineNumber.\r
+ @retval FALSE The status code specified by CodeType, Value, and Data could\r
+ not be converted to ASSERT() arguments.\r
+\r
+**/\r
+BOOLEAN\r
+EFIAPI\r
+ReportStatusCodeExtractAssertInfo (\r
+ IN EFI_STATUS_CODE_TYPE CodeType,\r
+ IN EFI_STATUS_CODE_VALUE Value,\r
+ IN CONST EFI_STATUS_CODE_DATA *Data,\r
+ OUT CHAR8 **Filename,\r
+ OUT CHAR8 **Description,\r
+ OUT UINT32 *LineNumber\r
+ )\r
+{\r
+ EFI_DEBUG_ASSERT_DATA *AssertData;\r
+\r
+ ASSERT (Data != NULL);\r
+ ASSERT (Filename != NULL);\r
+ ASSERT (Description != NULL);\r
+ ASSERT (LineNumber != NULL);\r
+\r
+ if (((CodeType & EFI_STATUS_CODE_TYPE_MASK) == EFI_ERROR_CODE) &&\r
+ ((CodeType & EFI_STATUS_CODE_SEVERITY_MASK) == EFI_ERROR_UNRECOVERED) &&\r
+ ((Value & EFI_STATUS_CODE_OPERATION_MASK) == EFI_SW_EC_ILLEGAL_SOFTWARE_STATE)) {\r
+ AssertData = (EFI_DEBUG_ASSERT_DATA *)(Data + 1);\r
+ *Filename = (CHAR8 *)(AssertData + 1);\r
+ *Description = *Filename + AsciiStrLen (*Filename) + 1;\r
+ *LineNumber = AssertData->LineNumber;\r
+ return TRUE;\r
+ }\r
+ return FALSE;\r
+}\r
+\r
+\r
+/**\r
+ Extracts DEBUG() information from a status code structure.\r
+\r
+ Converts the status code specified by Data to the DEBUG() arguments specified\r
+ by ErrorLevel, Marker, and Format. If type GUID in Data is\r
+ EFI_STATUS_CODE_DATA_TYPE_DEBUG_GUID, then extract ErrorLevel, Marker, and\r
+ Format from the optional data area of the status code buffer specified by Data.\r
+ The optional data area of Data contains a 32-bit ErrorLevel followed by Marker\r
+ which is 12 UINTN parameters, followed by a Null-terminated ASCII string for\r
+ the Format. If the DEBUG() information could be extracted from Data, then\r
+ return TRUE. Otherwise, FALSE is returned.\r
+\r
+ If Data is NULL, then ASSERT().\r
+ If ErrorLevel is NULL, then ASSERT().\r
+ If Marker is NULL, then ASSERT().\r
+ If Format is NULL, then ASSERT().\r
+\r
+ @param Data Pointer to status code data buffer.\r
+ @param ErrorLevel Pointer to error level mask for a debug message.\r
+ @param Marker Pointer to the variable argument list associated with Format.\r
+ @param Format Pointer to a Null-terminated ASCII format string of a\r
+ debug message.\r
+\r
+ @retval TRUE The status code specified by Data was converted DEBUG() arguments\r
+ specified by ErrorLevel, Marker, and Format.\r
+ @retval FALSE The status code specified by Data could not be converted to\r
+ DEBUG() arguments.\r
+\r
+**/\r
+BOOLEAN\r
+EFIAPI\r
+ReportStatusCodeExtractDebugInfo (\r
+ IN CONST EFI_STATUS_CODE_DATA *Data,\r
+ OUT UINT32 *ErrorLevel,\r
+ OUT VA_LIST *Marker,\r
+ OUT CHAR8 **Format\r
+ )\r
+{\r
+ EFI_DEBUG_INFO *DebugInfo;\r
+\r
+ ASSERT (Data != NULL);\r
+ ASSERT (ErrorLevel != NULL);\r
+ ASSERT (Marker != NULL);\r
+ ASSERT (Format != NULL);\r
+\r
+ //\r
+ // If the GUID type is not EFI_STATUS_CODE_DATA_TYPE_DEBUG_GUID then return FALSE\r
+ //\r
+ if (!CompareGuid (&Data->Type, &gEfiStatusCodeDataTypeDebugGuid)) {\r
+ return FALSE;\r
+ }\r
+\r
+ //\r
+ // Retrieve the debug information from the status code record\r
+ //\r
+ DebugInfo = (EFI_DEBUG_INFO *)(Data + 1);\r
+\r
+ *ErrorLevel = DebugInfo->ErrorLevel;\r
+\r
+ //\r
+ // The first 12 * UINTN bytes of the string are really an\r
+ // argument stack to support varargs on the Format string.\r
+ //\r
+ *Marker = (VA_LIST) (DebugInfo + 1);\r
+ *Format = (CHAR8 *)(((UINT64 *)*Marker) + 12);\r
+\r
+ return TRUE;\r
+}\r
+\r
+\r
+/**\r
+ Reports a status code.\r
+\r
+ Reports the status code specified by the parameters Type and Value. Status\r
+ code also require an instance, caller ID, and extended data. This function\r
+ passed in a zero instance, NULL extended data, and a caller ID of\r
+ gEfiCallerIdGuid, which is the GUID for the module.\r
+\r
+ ReportStatusCode()must actively prevent recusrsion. If ReportStatusCode()\r
+ is called while processing another any other Report Status Code Library function,\r
+ then ReportStatusCode() must return immediately.\r
+\r
+ @param Type Status code type.\r
+ @param Value Status code value.\r
+\r
+ @retval EFI_SUCCESS The status code was reported.\r
+ @retval EFI_DEVICE_ERROR There status code could not be reported due to a\r
+ device error.\r
+ @retval EFI_UNSUPPORTED Report status code is not supported\r
+\r
+**/\r
+EFI_STATUS\r
+EFIAPI\r
+ReportStatusCode (\r
+ IN EFI_STATUS_CODE_TYPE Type,\r
+ IN EFI_STATUS_CODE_VALUE Value\r
+ )\r
+{\r
+ return InternalReportStatusCode (Type, Value, 0, &gEfiCallerIdGuid, NULL);\r
+}\r
+\r
+\r
+/**\r
+ Reports a status code with a Device Path Protocol as the extended data.\r
+\r
+ Allocates and fills in the extended data section of a status code with the\r
+ Device Path Protocol specified by DevicePath. This function is responsible\r
+ for allocating a buffer large enough for the standard header and the device\r
+ path. The standard header is filled in with a GUID of\r
+ gEfiStatusCodeSpecificDataGuid. The status code is reported with a zero\r
+ instance and a caller ID of gEfiCallerIdGuid.\r
+\r
+ ReportStatusCodeWithDevicePath()must actively prevent recursion. If\r
+ ReportStatusCodeWithDevicePath() is called while processing another any other\r
+ Report Status Code Library function, then ReportStatusCodeWithDevicePath()\r
+ must return EFI_DEVICE_ERROR immediately.\r
+\r
+ If DevicePath is NULL, then ASSERT().\r
+\r
+ @param Type Status code type.\r
+ @param Value Status code value.\r
+ @param DevicePath Pointer to the Device Path Protocol to be reported.\r
+\r
+ @retval EFI_SUCCESS The status code was reported with the extended\r
+ data specified by DevicePath.\r
+ @retval EFI_OUT_OF_RESOURCES There were not enough resources to allocate the\r
+ extended data section.\r
+ @retval EFI_UNSUPPORTED Report status code is not supported\r
+\r
+**/\r
+EFI_STATUS\r
+EFIAPI\r
+ReportStatusCodeWithDevicePath (\r
+ IN EFI_STATUS_CODE_TYPE Type,\r
+ IN EFI_STATUS_CODE_VALUE Value,\r
+ IN CONST EFI_DEVICE_PATH_PROTOCOL *DevicePath\r
+ )\r
+{\r
+ ASSERT (DevicePath != NULL);\r
+ return EFI_UNSUPPORTED;\r
+}\r
+\r
+\r
+/**\r
+ Reports a status code with an extended data buffer.\r
+\r
+ Allocates and fills in the extended data section of a status code with the\r
+ extended data specified by ExtendedData and ExtendedDataSize. ExtendedData\r
+ is assumed to be one of the data structures specified in Related Definitions.\r
+ These data structure do not have the standard header, so this function is\r
+ responsible for allocating a buffer large enough for the standard header and\r
+ the extended data passed into this function. The standard header is filled\r
+ in with a GUID of gEfiStatusCodeSpecificDataGuid. The status code is reported\r
+ with a zero instance and a caller ID of gEfiCallerIdGuid.\r
+\r
+ ReportStatusCodeWithExtendedData()must actively prevent recursion. If\r
+ ReportStatusCodeWithExtendedData() is called while processing another any other\r
+ Report Status Code Library function, then ReportStatusCodeWithExtendedData()\r
+ must return EFI_DEVICE_ERROR immediately.\r
+\r
+ If ExtendedData is NULL, then ASSERT().\r
+ If ExtendedDataSize is 0, then ASSERT().\r
+\r
+ @param Type Status code type.\r
+ @param Value Status code value.\r
+ @param ExtendedData Pointer to the extended data buffer to be reported.\r
+ @param ExtendedDataSize The size, in bytes, of the extended data buffer to\r
+ be reported.\r
+\r
+ @retval EFI_SUCCESS The status code was reported with the extended\r
+ data specified by ExtendedData and ExtendedDataSize.\r
+ @retval EFI_OUT_OF_RESOURCES There were not enough resources to allocate the\r
+ extended data section.\r
+ @retval EFI_UNSUPPORTED Report status code is not supported\r
+\r
+**/\r
+EFI_STATUS\r
+EFIAPI\r
+ReportStatusCodeWithExtendedData (\r
+ IN EFI_STATUS_CODE_TYPE Type,\r
+ IN EFI_STATUS_CODE_VALUE Value,\r
+ IN CONST VOID *ExtendedData,\r
+ IN UINTN ExtendedDataSize\r
+ )\r
+{\r
+ ASSERT (ExtendedData != NULL);\r
+ ASSERT (ExtendedDataSize != 0);\r
+ return ReportStatusCodeEx (\r
+ Type,\r
+ Value,\r
+ 0,\r
+ NULL,\r
+ NULL,\r
+ ExtendedData,\r
+ ExtendedDataSize\r
+ );\r
+}\r
+\r
+\r
+/**\r
+ Reports a status code with full parameters.\r
+\r
+ The function reports a status code. If ExtendedData is NULL and ExtendedDataSize\r
+ is 0, then an extended data buffer is not reported. If ExtendedData is not\r
+ NULL and ExtendedDataSize is not 0, then an extended data buffer is allocated.\r
+ ExtendedData is assumed not have the standard status code header, so this function\r
+ is responsible for allocating a buffer large enough for the standard header and\r
+ the extended data passed into this function. The standard header is filled in\r
+ with a GUID specified by ExtendedDataGuid. If ExtendedDataGuid is NULL, then a\r
+ GUID of gEfiStatusCodeSpecificDatauid is used. The status code is reported with\r
+ an instance specified by Instance and a caller ID specified by CallerId. If\r
+ CallerId is NULL, then a caller ID of gEfiCallerIdGuid is used.\r
+\r
+ ReportStatusCodeEx()must actively prevent recursion. If ReportStatusCodeEx()\r
+ is called while processing another any other Report Status Code Library function,\r
+ then ReportStatusCodeEx() must return EFI_DEVICE_ERROR immediately.\r
+\r
+ If ExtendedData is NULL and ExtendedDataSize is not zero, then ASSERT().\r
+ If ExtendedData is not NULL and ExtendedDataSize is zero, then ASSERT().\r
+\r
+ @param Type Status code type.\r
+ @param Value Status code value.\r
+ @param Instance Status code instance number.\r
+ @param CallerId Pointer to a GUID that identifies the caller of this\r
+ function. If this parameter is NULL, then a caller\r
+ ID of gEfiCallerIdGuid is used.\r
+ @param ExtendedDataGuid Pointer to the GUID for the extended data buffer.\r
+ If this parameter is NULL, then a the status code\r
+ standard header is filled in with\r
+ gEfiStatusCodeSpecificDataGuid.\r
+ @param ExtendedData Pointer to the extended data buffer. This is an\r
+ optional parameter that may be NULL.\r
+ @param ExtendedDataSize The size, in bytes, of the extended data buffer.\r
+\r
+ @retval EFI_SUCCESS The status code was reported.\r
+ @retval EFI_OUT_OF_RESOURCES There were not enough resources to allocate\r
+ the extended data section if it was specified.\r
+ @retval EFI_UNSUPPORTED Report status code is not supported\r
+\r
+**/\r
+EFI_STATUS\r
+EFIAPI\r
+ReportStatusCodeEx (\r
+ IN EFI_STATUS_CODE_TYPE Type,\r
+ IN EFI_STATUS_CODE_VALUE Value,\r
+ IN UINT32 Instance,\r
+ IN CONST EFI_GUID *CallerId OPTIONAL,\r
+ IN CONST EFI_GUID *ExtendedDataGuid OPTIONAL,\r
+ IN CONST VOID *ExtendedData OPTIONAL,\r
+ IN UINTN ExtendedDataSize\r
+ )\r
+{\r
+ EFI_STATUS_CODE_DATA *StatusCodeData;\r
+ UINT64 Buffer[MAX_EXTENDED_DATA_SIZE / sizeof (UINT64)];\r
+\r
+ ASSERT (!((ExtendedData == NULL) && (ExtendedDataSize != 0)));\r
+ ASSERT (!((ExtendedData != NULL) && (ExtendedDataSize == 0)));\r
+\r
+ if (ExtendedDataSize > (MAX_EXTENDED_DATA_SIZE - sizeof (EFI_STATUS_CODE_DATA))) {\r
+ return EFI_OUT_OF_RESOURCES;\r
+ }\r
+ StatusCodeData = (EFI_STATUS_CODE_DATA *)Buffer;\r
+ StatusCodeData->HeaderSize = sizeof (EFI_STATUS_CODE_DATA);\r
+ StatusCodeData->Size = (UINT16)ExtendedDataSize;\r
+ if (ExtendedDataGuid == NULL) {\r
+ ExtendedDataGuid = &gEfiStatusCodeSpecificDataGuid;\r
+ }\r
+ CopyGuid (&StatusCodeData->Type, ExtendedDataGuid);\r
+ CopyMem (StatusCodeData + 1, ExtendedData, ExtendedDataSize);\r
+ if (CallerId == NULL) {\r
+ CallerId = &gEfiCallerIdGuid;\r
+ }\r
+ return InternalReportStatusCode (Type, Value, Instance, CallerId, StatusCodeData);\r
+}\r
+\r
+\r
+/**\r
+ Returns TRUE if status codes of type EFI_PROGRESS_CODE are enabled\r
+\r
+ This function returns TRUE if the REPORT_STATUS_CODE_PROPERTY_PROGRESS_CODE_ENABLED\r
+ bit of PcdReportStatusCodeProperyMask is set. Otherwise FALSE is returned.\r
+\r
+ @retval TRUE The REPORT_STATUS_CODE_PROPERTY_PROGRESS_CODE_ENABLED bit of\r
+ PcdReportStatusCodeProperyMask is set.\r
+ @retval FALSE The REPORT_STATUS_CODE_PROPERTY_PROGRESS_CODE_ENABLED bit of\r
+ PcdReportStatusCodeProperyMask is clear.\r
+\r
+**/\r
+BOOLEAN\r
+EFIAPI\r
+ReportProgressCodeEnabled (\r
+ VOID\r
+ )\r
+{\r
+ return (BOOLEAN) ((PcdGet8(PcdReportStatusCodePropertyMask) & REPORT_STATUS_CODE_PROPERTY_PROGRESS_CODE_ENABLED) != 0);\r
+}\r
+\r
+\r
+/**\r
+ Returns TRUE if status codes of type EFI_ERROR_CODE are enabled\r
+\r
+ This function returns TRUE if the REPORT_STATUS_CODE_PROPERTY_ERROR_CODE_ENABLED\r
+ bit of PcdReportStatusCodeProperyMask is set. Otherwise FALSE is returned.\r
+\r
+ @retval TRUE The REPORT_STATUS_CODE_PROPERTY_ERROR_CODE_ENABLED bit of\r
+ PcdReportStatusCodeProperyMask is set.\r
+ @retval FALSE The REPORT_STATUS_CODE_PROPERTY_ERROR_CODE_ENABLED bit of\r
+ PcdReportStatusCodeProperyMask is clear.\r
+\r
+**/\r
+BOOLEAN\r
+EFIAPI\r
+ReportErrorCodeEnabled (\r
+ VOID\r
+ )\r
+{\r
+ return (BOOLEAN) ((PcdGet8(PcdReportStatusCodePropertyMask) & REPORT_STATUS_CODE_PROPERTY_ERROR_CODE_ENABLED) != 0);\r
+}\r
+\r
+\r
+/**\r
+ Returns TRUE if status codes of type EFI_DEBUG_CODE are enabled\r
+\r
+ This function returns TRUE if the REPORT_STATUS_CODE_PROPERTY_DEBUG_CODE_ENABLED\r
+ bit of PcdReportStatusCodeProperyMask is set. Otherwise FALSE is returned.\r
+\r
+ @retval TRUE The REPORT_STATUS_CODE_PROPERTY_DEBUG_CODE_ENABLED bit of\r
+ PcdReportStatusCodeProperyMask is set.\r
+ @retval FALSE The REPORT_STATUS_CODE_PROPERTY_DEBUG_CODE_ENABLED bit of\r
+ PcdReportStatusCodeProperyMask is clear.\r
+\r
+**/\r
+BOOLEAN\r
+EFIAPI\r
+ReportDebugCodeEnabled (\r
+ VOID\r
+ )\r
+{\r
+ return (BOOLEAN) ((PcdGet8(PcdReportStatusCodePropertyMask) & REPORT_STATUS_CODE_PROPERTY_DEBUG_CODE_ENABLED) != 0);\r
+}\r
**/\r
\r
#include "DxeStatusCode.h"\r
+#include "DebugInfo.h"\r
\r
STATIC\r
EFI_SERIAL_IO_PROTOCOL *mSerialIoProtocol;\r
**/\r
\r
#include "PeiStatusCode.h"\r
+#include "DebugInfo.h"\r
\r
/**\r
Convert status code value and extended data to readable ASCII string, send string to serial I/O device.\r