--- /dev/null
+/**@file\r
+\r
+Copyright (c) 2006 - 2009, Intel Corporation\r
+Portions copyright (c) 2008-2010 Apple Inc. All rights reserved.\r
+All rights reserved. This program and the accompanying materials\r
+are licensed and made available under the terms and conditions of the BSD License\r
+which accompanies this distribution. The full text of the license may be found at\r
+http://opensource.org/licenses/bsd-license.php\r
+\r
+THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,\r
+WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.\r
+\r
+**/\r
+\r
+#include <PiDxe.h>\r
+#include <Library/PeCoffLib.h>\r
+\r
+#include <Library/BaseLib.h>\r
+#include <Library/DebugLib.h>\r
+#include <Library/BaseMemoryLib.h>\r
+#include <Library/PeCoffExtraActionLib.h>\r
+#include <Library/PrintLib.h>\r
+\r
+\r
+/**\r
+ If the build is done on cygwin the paths are cygpaths. \r
+ /cygdrive/c/tmp.txt vs c:\tmp.txt so we need to convert\r
+ them to work with RVD commands\r
+\r
+ @param Name Path to convert if needed\r
+\r
+**/\r
+CHAR8 *\r
+DeCygwinPathIfNeeded (\r
+ IN CHAR8 *Name\r
+ )\r
+{\r
+ CHAR8 *Ptr;\r
+ UINTN Index;\r
+ UINTN Len;\r
+ \r
+ Ptr = AsciiStrStr (Name, "/cygdrive/");\r
+ if (Ptr == NULL) {\r
+ return Name;\r
+ }\r
+ \r
+ Len = AsciiStrLen (Ptr);\r
+ \r
+ // convert "/cygdrive" to spaces\r
+ for (Index = 0; Index < 9; Index++) {\r
+ Ptr[Index] = ' ';\r
+ }\r
+\r
+ // convert /c to c:\r
+ Ptr[9] = Ptr[10];\r
+ Ptr[10] = ':';\r
+ \r
+ // switch path seperators\r
+ for (Index = 11; Index < Len; Index++) {\r
+ if (Ptr[Index] == '/') {\r
+ Ptr[Index] = '\\' ;\r
+ }\r
+ }\r
+\r
+ return Name;\r
+}\r
+\r
+\r
+/**\r
+ Performs additional actions after a PE/COFF image has been loaded and relocated.\r
+\r
+ If ImageContext is NULL, then ASSERT().\r
+\r
+ @param ImageContext Pointer to the image context structure that describes the\r
+ PE/COFF image that has already been loaded and relocated.\r
+\r
+**/\r
+VOID\r
+EFIAPI\r
+PeCoffLoaderRelocateImageExtraAction (\r
+ IN OUT PE_COFF_LOADER_IMAGE_CONTEXT *ImageContext\r
+ )\r
+{\r
+#ifdef __CC_ARM\r
+ // Print out the command for the RVD debugger to load symbols for this image\r
+ DEBUG ((EFI_D_ERROR, "load /a /ni /np %a &0x%08x\n", DeCygwinPathIfNeeded (ImageContext->PdbPointer), (UINTN)(ImageContext->ImageAddress + ImageContext->SizeOfHeaders)));\r
+#elif __GNUC__\r
+ // This may not work correctly if you generate PE/COFF directlyas then the Offset would not be required\r
+ DEBUG ((EFI_D_ERROR, "add-symbol-file %a 0x%08x\n", DeCygwinPathIfNeeded (ImageContext->PdbPointer), (UINTN)(ImageContext->ImageAddress + ImageContext->SizeOfHeaders)));\r
+#else\r
+ DEBUG ((EFI_D_ERROR, "Loading driver at 0x%11p EntryPoint=0x%11p ", (VOID *)(UINTN) ImageContext->ImageAddress, FUNCTION_ENTRY_POINT (ImageContext->EntryPoint)));\r
+#endif\r
+}\r
+\r
+\r
+\r
+/**\r
+ Performs additional actions just before a PE/COFF image is unloaded. Any resources\r
+ that were allocated by PeCoffLoaderRelocateImageExtraAction() must be freed.\r
+ \r
+ If ImageContext is NULL, then ASSERT().\r
+ \r
+ @param ImageContext Pointer to the image context structure that describes the\r
+ PE/COFF image that is being unloaded.\r
+\r
+**/\r
+VOID\r
+EFIAPI\r
+PeCoffLoaderUnloadImageExtraAction (\r
+ IN OUT PE_COFF_LOADER_IMAGE_CONTEXT *ImageContext\r
+ )\r
+{\r
+#ifdef __CC_ARM\r
+ // Print out the command for the RVD debugger to load symbols for this image\r
+ DEBUG ((EFI_D_ERROR, "unload symbols_only %a", DeCygwinPathIfNeeded (ImageContext->PdbPointer)));\r
+#elif __GNUC__\r
+ // This may not work correctly if you generate PE/COFF directlyas then the Offset would not be required\r
+ DEBUG ((EFI_D_ERROR, "remove-symbol-file %a 0x%08x\n", DeCygwinPathIfNeeded (ImageContext->PdbPointer), (UINTN)(ImageContext->ImageAddress + ImageContext->SizeOfHeaders)));\r
+#else\r
+ DEBUG ((EFI_D_ERROR, "Unloading %a", ImageContext->PdbPointer));\r
+#endif\r
+}\r
--- /dev/null
+#/** @file
+# PeCoff extra action libary for DXE phase that run Unix emulator.
+#
+# Lib to provide memory journal status code reporting Routines
+# Copyright (c) 2007 - 2010, Intel Corporation
+# Portiions copyright (c) 2010 Apple, Inc. All rights reserved.
+# All rights reserved. This program and the accompanying materials
+# are licensed and made available under the terms and conditions of the BSD License
+# which accompanies this distribution. The full text of the license may be found at
+# http://opensource.org/licenses/bsd-license.php
+#
+# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+#
+#
+#**/
+
+[Defines]
+ INF_VERSION = 0x00010005
+ BASE_NAME = DebugUnixPeCoffExtraActionLib
+ FILE_GUID = C3E9448E-1726-42fb-9368-41F75B038C0C
+ MODULE_TYPE = BASE
+ VERSION_STRING = 1.0
+ LIBRARY_CLASS = PeCoffExtraActionLib
+
+#
+# The following information is for reference only and not required by the build tools.
+#
+# VALID_ARCHITECTURES = ARM
+#
+
+[Sources.common]
+ DebugPeCoffExtraActionLib.c
+
+[Packages]
+ MdePkg/MdePkg.dec
+
+[LibraryClasses]
+ DebugLib
UncachedMemoryAllocationLib|ArmPkg/Library/UncachedMemoryAllocationLib/UncachedMemoryAllocationLib.inf
!else
DebugLib|MdePkg/Library/BaseDebugLibSerialPort/BaseDebugLibSerialPort.inf
- UncachedMemoryAllocationLib|ArmPkg/Library/DebugUncachedMemoryAllocationLib/DebugUncachedMemoryAllocationLib.inf
+ UncachedMemoryAllocationLib|ArmPkg/Library/UncachedMemoryAllocationLib/UncachedMemoryAllocationLib.inf
+# UncachedMemoryAllocationLib|ArmPkg/Library/DebugUncachedMemoryAllocationLib/DebugUncachedMemoryAllocationLib.inf
!endif
ArmLib|ArmPkg/Library/ArmLib/ArmV7/ArmV7Lib.inf
# the version of RVD I have does not support scipts accessing system memory.
#
# PeCoffExtraActionLib|ArmPkg/Library/RvdPeCoffExtraActionLib/RvdPeCoffExtraActionLib.inf
- PeCoffExtraActionLib|MdePkg/Library/BasePeCoffExtraActionLibNull/BasePeCoffExtraActionLibNull.inf
+ PeCoffExtraActionLib|ArmPkg/Library/DebugPeCoffExtraActionLib/DebugPeCoffExtraActionLib.inf
+# PeCoffExtraActionLib|MdePkg/Library/BasePeCoffExtraActionLibNull/BasePeCoffExtraActionLibNull.inf
CacheMaintenanceLib|ArmPkg/Library/ArmCacheMaintenanceLib/ArmCacheMaintenanceLib.inf
ArmDisassemblerLib|ArmPkg/Library/ArmDisassemblerLib/ArmDisassemblerLib.inf
DebugAgentLib|MdeModulePkg/Library/DebugAgentLibNull/DebugAgentLibNull.inf
+ UsbLib|AppleCommonPkg/Library/AppleUsbLib/AppleUsbDxeLib.inf
[LibraryClasses.common.SEC]
ArmLib|ArmPkg/Library/ArmLib/ArmV7/ArmV7LibPrePi.inf
gEfiMdePkgTokenSpaceGuid.PcdMaximumLinkedListLength|1000000
gEfiMdePkgTokenSpaceGuid.PcdSpinLockTimeout|10000000
gEfiMdePkgTokenSpaceGuid.PcdDebugClearMemoryValue|0xAF
- gEfiMdePkgTokenSpaceGuid.PcdPerformanceLibraryPropertyMask|0
+ gEfiMdePkgTokenSpaceGuid.PcdPerformanceLibraryPropertyMask|1
gEfiMdePkgTokenSpaceGuid.PcdPostCodePropertyMask|0
gEfiMdePkgTokenSpaceGuid.PcdUefiLibMaxPrintBufferSize|320
# DEBUG_EVENT 0x00080000 // Event messages
# DEBUG_ERROR 0x80000000 // Error
- gEfiMdePkgTokenSpaceGuid.PcdDebugPrintErrorLevel|0x80000004
+ gEfiMdePkgTokenSpaceGuid.PcdDebugPrintErrorLevel|0x80000000
gEfiMdePkgTokenSpaceGuid.PcdReportStatusCodePropertyMask|0x07
MdeModulePkg/Bus/Usb/UsbBusDxe/UsbBusDxe.inf
MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassStorageDxe.inf
+ AppleCommonPkg/Bus/Pci/EhciDxe/Ehci.inf {
+ <PcdsFixedAtBuild>
+ gEfiMdePkgTokenSpaceGuid.PcdDebugPrintErrorLevel|0x800fffff
+ }
+ AppleCommonPkg/Bus/Usb/UsbBotDxe/UsbBot.inf\r
+ AppleCommonPkg/Bus/Usb/UsbCbiDxe/Cbi0/UsbCbi0.inf\r
+ AppleCommonPkg/Bus/Usb/UsbCbiDxe/Cbi1/UsbCbi1.inf\r
+ AppleCommonPkg/Bus/Usb/UsbBusDxe/UsbBus.inf\r
+ AppleCommonPkg/Bus/Usb/UsbMassStorageDxe/UsbMassStorage.inf\r
+
#
# Nand Flash
#
\r
ArmConfigureMmu (MemoryTable, &TranslationTableBase, &TranslationTableSize);\r
\r
- BuildMemoryAllocationHob((EFI_PHYSICAL_ADDRESS)(UINTN)TranslationTableBase, TranslationTableSize, EfiBootServicesData);\r
+ BuildMemoryAllocationHob((EFI_PHYSICAL_ADDRESS)(UINTN)TranslationTableBase, TranslationTableSize, EfiBootServicesData);
}\r
#include <Library/OmapLib.h>\r
#include <Library/ArmLib.h>\r
#include <Library/PeCoffGetEntryPointLib.h>\r
+#include <Library/DebugAgentLib.h>\r
\r
#include <Ppi/GuidedSectionExtraction.h>\r
#include <Guid/LzmaDecompress.h>\r
\r
#include "LzmaDecompress.h"\r
\r
-VOID\r
-EFIAPI \r
-_ModuleEntryPoint(\r
- VOID\r
- );\r
-\r
-CHAR8 *\r
-DeCygwinPathIfNeeded (\r
- IN CHAR8 *Name\r
- );\r
-\r
VOID\r
PadConfiguration (\r
VOID\r
VOID\r
);\r
\r
+\r
VOID\r
TimerInit (\r
VOID\r
UINT32 TimerBaseAddress = TimerBase(Timer);\r
\r
// Set source clock for GPT3 & GPT4 to SYS_CLK\r
- MmioOr32(CM_CLKSEL_PER, CM_CLKSEL_PER_CLKSEL_GPT3_SYS \r
- | CM_CLKSEL_PER_CLKSEL_GPT4_SYS);\r
+ MmioOr32 (CM_CLKSEL_PER, CM_CLKSEL_PER_CLKSEL_GPT3_SYS | CM_CLKSEL_PER_CLKSEL_GPT4_SYS);\r
\r
// Set count & reload registers\r
MmioWrite32 (TimerBaseAddress + GPTIMER_TCRR, 0x00000000);\r
VOID\r
);\r
\r
-/**\r
- If the build is done on cygwin the paths are cygpaths. \r
- /cygdrive/c/tmp.txt vs c:\tmp.txt so we need to convert\r
- them to work with RVD commands\r
-\r
- This is just code to help print out RVD symbol load command.\r
- If you build with cygwin paths aren't compatible with RVD.\r
-\r
- @param Name Path to convert if needed\r
-\r
-**/\r
-CHAR8 *\r
-SecDeCygwinPathIfNeeded (\r
- IN CHAR8 *Name\r
- )\r
-{\r
- CHAR8 *Ptr;\r
- UINTN Index;\r
- UINTN Len;\r
- \r
- Ptr = AsciiStrStr (Name, "/cygdrive/");\r
- if (Ptr == NULL) {\r
- return Name;\r
- }\r
- \r
- Len = AsciiStrLen (Ptr);\r
- \r
- // convert "/cygdrive" to spaces\r
- for (Index = 0; Index < 9; Index++) {\r
- Ptr[Index] = ' ';\r
- }\r
-\r
- // convert /c to c:\r
- Ptr[9] = Ptr[10];\r
- Ptr[10] = ':';\r
- \r
- // switch path seperators\r
- for (Index = 11; Index < Len; Index++) {\r
- if (Ptr[Index] == '/') {\r
- Ptr[Index] = '\\' ;\r
- }\r
- }\r
-\r
- return Name;\r
-}\r
-\r
\r
VOID\r
CEntryPoint (\r
\r
// Start talking\r
UartInit ();\r
- DEBUG ((EFI_D_ERROR, "UART Enabled\n"));\r
-\r
- DEBUG_CODE_BEGIN ();\r
- //\r
- // On a debug build print out information about the SEC. This is really info about\r
- // the PE/COFF file we are currently running from. Useful for loading symbols in a\r
- // debugger. Remember our image is really part of the FV.\r
- //\r
- RETURN_STATUS Status;\r
- EFI_PEI_FV_HANDLE VolumeHandle;\r
- EFI_PEI_FILE_HANDLE FileHandle;\r
- VOID *PeCoffImage;\r
- UINT32 Offset;\r
- CHAR8 *FilePath;\r
- FfsAnyFvFindFirstFile (EFI_FV_FILETYPE_SECURITY_CORE, &VolumeHandle, &FileHandle);\r
- Status = FfsFindSectionData (EFI_SECTION_TE, FileHandle, &PeCoffImage);\r
- if (EFI_ERROR (Status)) {\r
- // Usually is a TE (PI striped down PE/COFF), but could be a full PE/COFF\r
- Status = FfsFindSectionData (EFI_SECTION_PE32, FileHandle, &PeCoffImage);\r
- }\r
- if (!EFI_ERROR (Status)) {\r
- Offset = PeCoffGetSizeOfHeaders (PeCoffImage);\r
- FilePath = PeCoffLoaderGetPdbPointer (PeCoffImage);\r
- if (FilePath != NULL) {\r
- \r
- // \r
- // In general you should never have to use #ifdef __CC_ARM in the code. It\r
- // is hidden in the away in the MdePkg. But here we would like to print differnt things\r
- // for different toolchains. \r
- //\r
-#ifdef __CC_ARM\r
- // Print out the command for the RVD debugger to load symbols for this image\r
- DEBUG ((EFI_D_ERROR, "load /a /ni /np %a &0x%08x\n", SecDeCygwinPathIfNeeded (FilePath), (CHAR8 *)PeCoffImage + Offset));\r
-#elif __GNUC__\r
- // This may not work correctly if you generate PE/COFF directlyas then the Offset would not be required\r
- DEBUG ((EFI_D_ERROR, "add-symbol-file %a 0x%08x\n", FilePath, PeCoffImage + Offset));\r
-#else\r
- DEBUG ((EFI_D_ERROR, "SEC starts at 0x%08x with an entry point at 0x%08x %a\n", PeCoffImage, _ModuleEntryPoint, FilePath));\r
-#endif\r
- }\r
- }\r
-\r
- \r
- DEBUG_CODE_END ();\r
-\r
+ \r
+ InitializeDebugAgent (DEBUG_AGENT_INIT_PREMEM_SEC, NULL);\r
+ SaveAndSetDebugTimerInterrupt (TRUE);\r
\r
+ DEBUG ((EFI_D_ERROR, "UART Enabled\n"));\r
\r
// Start up a free running time so that the timer lib will work\r
TimerInit ();\r
LzmaDecompressLib
OmapLib
PeCoffGetEntryPointLib
+ DebugAgentLib
[FeaturePcd]
gEmbeddedTokenSpaceGuid.PcdCacheEnable