--- /dev/null
+/** @file
+ Template for Timer Architecture Protocol driver of the ARM flavor
+
+ Copyright (c) 2008 - 2009, Apple Inc. All rights reserved.<BR>
+
+ This program and the accompanying materials
+ are licensed and made available under the terms and conditions of the BSD License
+ which accompanies this distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+
+#include <PiDxe.h>
+
+#include <Library/BaseLib.h>
+#include <Library/DebugLib.h>
+#include <Library/BaseMemoryLib.h>
+#include <Library/UefiBootServicesTableLib.h>
+#include <Library/UefiLib.h>
+#include <Library/PcdLib.h>
+#include <Library/IoLib.h>
+#include <Library/OmapLib.h>
+
+#include <Protocol/Timer.h>
+#include <Protocol/HardwareInterrupt.h>
+
+#include <ArmEb/ArmEb.h>
+
+
+// The notification function to call on every timer interrupt.
+volatile EFI_TIMER_NOTIFY mTimerNotifyFunction = (EFI_TIMER_NOTIFY)NULL;
+
+
+// The current period of the timer interrupt
+volatile UINT64 mTimerPeriod = 0;
+
+// Cached copy of the Hardware Interrupt protocol instance
+EFI_HARDWARE_INTERRUPT_PROTOCOL *gInterrupt = NULL;
+
+// Cached interrupt vector
+UINTN gVector;
+
+
+/**
+
+ C Interrupt Handler calledin the interrupt context when Source interrupt is active.
+
+
+ @param Source Source of the interrupt. Hardware routing off a specific platform defines
+ what source means.
+
+ @param SystemContext Pointer to system register context. Mostly used by debuggers and will
+ update the system context after the return from the interrupt if
+ modified. Don't change these values unless you know what you are doing
+
+**/
+VOID
+EFIAPI
+TimerInterruptHandler (
+ IN HARDWARE_INTERRUPT_SOURCE Source,
+ IN EFI_SYSTEM_CONTEXT SystemContext
+ )
+{
+ EFI_TPL OriginalTPL;
+
+ //
+ // DXE core uses this callback for the EFI timer tick. The DXE core uses locks
+ // that raise to TPL_HIGH and then restore back to current level. Thus we need
+ // to make sure TPL level is set to TPL_HIGH while we are handling the timer tick.
+ //
+ OriginalTPL = gBS->RaiseTPL (TPL_HIGH_LEVEL);
+
+ // clear the periodic interrupt\r
+ MmioWrite32 (EB_SP804_TIMER0_BASE + SP804_TIMER_INT_CLR_REG, 0);
+
+ // signal end of interrupt early to help avoid losing subsequent ticks from long duration handlers
+ gInterrupt->EndOfInterrupt (gInterrupt, Source);
+
+ if (mTimerNotifyFunction) {
+ mTimerNotifyFunction (mTimerPeriod);
+ }
+
+ gBS->RestoreTPL (OriginalTPL);
+}
+
+
+/**
+ This function registers the handler NotifyFunction so it is called every time
+ the timer interrupt fires. It also passes the amount of time since the last
+ handler call to the NotifyFunction. If NotifyFunction is NULL, then the
+ handler is unregistered. If the handler is registered, then EFI_SUCCESS is
+ returned. If the CPU does not support registering a timer interrupt handler,
+ then EFI_UNSUPPORTED is returned. If an attempt is made to register a handler
+ when a handler is already registered, then EFI_ALREADY_STARTED is returned.
+ If an attempt is made to unregister a handler when a handler is not registered,
+ then EFI_INVALID_PARAMETER is returned. If an error occurs attempting to
+ register the NotifyFunction with the timer interrupt, then EFI_DEVICE_ERROR
+ is returned.
+
+ @param This The EFI_TIMER_ARCH_PROTOCOL instance.
+ @param NotifyFunction The function to call when a timer interrupt fires. This
+ function executes at TPL_HIGH_LEVEL. The DXE Core will
+ register a handler for the timer interrupt, so it can know
+ how much time has passed. This information is used to
+ signal timer based events. NULL will unregister the handler.
+ @retval EFI_SUCCESS The timer handler was registered.
+ @retval EFI_UNSUPPORTED The platform does not support timer interrupts.
+ @retval EFI_ALREADY_STARTED NotifyFunction is not NULL, and a handler is already
+ registered.
+ @retval EFI_INVALID_PARAMETER NotifyFunction is NULL, and a handler was not
+ previously registered.
+ @retval EFI_DEVICE_ERROR The timer handler could not be registered.
+
+**/
+EFI_STATUS
+EFIAPI
+TimerDriverRegisterHandler (
+ IN EFI_TIMER_ARCH_PROTOCOL *This,
+ IN EFI_TIMER_NOTIFY NotifyFunction
+ )
+{
+ if ((NotifyFunction == NULL) && (mTimerNotifyFunction == NULL)) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ if ((NotifyFunction != NULL) && (mTimerNotifyFunction != NULL)) {
+ return EFI_ALREADY_STARTED;
+ }
+
+ mTimerNotifyFunction = NotifyFunction;
+
+ return EFI_SUCCESS;
+}
+
+/**
+
+ This function adjusts the period of timer interrupts to the value specified
+ by TimerPeriod. If the timer period is updated, then the selected timer
+ period is stored in EFI_TIMER.TimerPeriod, and EFI_SUCCESS is returned. If
+ the timer hardware is not programmable, then EFI_UNSUPPORTED is returned.
+ If an error occurs while attempting to update the timer period, then the
+ timer hardware will be put back in its state prior to this call, and
+ EFI_DEVICE_ERROR is returned. If TimerPeriod is 0, then the timer interrupt
+ is disabled. This is not the same as disabling the CPU's interrupts.
+ Instead, it must either turn off the timer hardware, or it must adjust the
+ interrupt controller so that a CPU interrupt is not generated when the timer
+ interrupt fires.
+
+ @param This The EFI_TIMER_ARCH_PROTOCOL instance.
+ @param TimerPeriod The rate to program the timer interrupt in 100 nS units. If
+ the timer hardware is not programmable, then EFI_UNSUPPORTED is
+ returned. If the timer is programmable, then the timer period
+ will be rounded up to the nearest timer period that is supported
+ by the timer hardware. If TimerPeriod is set to 0, then the
+ timer interrupts will be disabled.
+
+
+ @retval EFI_SUCCESS The timer period was changed.
+ @retval EFI_UNSUPPORTED The platform cannot change the period of the timer interrupt.
+ @retval EFI_DEVICE_ERROR The timer period could not be changed due to a device error.
+
+**/
+EFI_STATUS
+EFIAPI
+TimerDriverSetTimerPeriod (
+ IN EFI_TIMER_ARCH_PROTOCOL *This,
+ IN UINT64 TimerPeriod
+ )
+{
+ EFI_STATUS Status;
+ UINT64 TimerTicks;\r
+
+ // always disable the timer
+ MmioAnd32 (EB_SP804_TIMER0_BASE + SP804_TIMER_CONTROL_REG, ~SP804_TIMER_CTRL_ENABLE);
+
+ if (TimerPeriod == 0) {
+ // leave timer disabled from above, and...\r
+ // disable timer 0/1 interrupt for a TimerPeriod of 0\r
+
+ Status = gInterrupt->DisableInterruptSource (gInterrupt, gVector);
+ } else {
+ // Convert TimerPeriod into 1MHz clock counts (us units = 100ns units / 10)\r
+ TimerTicks = DivU64x32 (TimerPeriod, 10, NULL);\r
+ \r
+ // if it's larger than 32-bits, pin to highest value\r
+ if (TimerTicks > 0xffffffff) {\r
+ TimerTicks = 0xffffffff;\r
+ }\r
+\r
+ // Program the SP804 timer with the new count value\r
+ MmioWrite32 (EB_SP804_TIMER0_BASE + SP804_TIMER_LOAD_REG, TimerTicks);\r
+ \r
+ // enable the timer\r
+ MmioOr32 (EB_SP804_TIMER0_BASE + SP804_TIMER_CONTROL_REG, SP804_TIMER_CTRL_ENABLE);\r
+\r
+ // enable timer 0/1 interrupts\r
+ Status = gInterrupt->EnableInterruptSource (gInterrupt, gVector);
+ }
+
+ //
+ // Save the new timer period
+ //
+ mTimerPeriod = TimerPeriod;
+ return Status;
+}
+
+
+/**
+ This function retrieves the period of timer interrupts in 100 ns units,
+ returns that value in TimerPeriod, and returns EFI_SUCCESS. If TimerPeriod
+ is NULL, then EFI_INVALID_PARAMETER is returned. If a TimerPeriod of 0 is
+ returned, then the timer is currently disabled.
+
+ @param This The EFI_TIMER_ARCH_PROTOCOL instance.
+ @param TimerPeriod A pointer to the timer period to retrieve in 100 ns units. If
+ 0 is returned, then the timer is currently disabled.
+
+
+ @retval EFI_SUCCESS The timer period was returned in TimerPeriod.
+ @retval EFI_INVALID_PARAMETER TimerPeriod is NULL.
+
+**/
+EFI_STATUS
+EFIAPI
+TimerDriverGetTimerPeriod (
+ IN EFI_TIMER_ARCH_PROTOCOL *This,
+ OUT UINT64 *TimerPeriod
+ )
+{
+ if (TimerPeriod == NULL) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ *TimerPeriod = mTimerPeriod;
+ return EFI_SUCCESS;
+}
+
+/**
+ This function generates a soft timer interrupt. If the platform does not support soft
+ timer interrupts, then EFI_UNSUPPORTED is returned. Otherwise, EFI_SUCCESS is returned.
+ If a handler has been registered through the EFI_TIMER_ARCH_PROTOCOL.RegisterHandler()
+ service, then a soft timer interrupt will be generated. If the timer interrupt is
+ enabled when this service is called, then the registered handler will be invoked. The
+ registered handler should not be able to distinguish a hardware-generated timer
+ interrupt from a software-generated timer interrupt.
+
+ @param This The EFI_TIMER_ARCH_PROTOCOL instance.
+
+ @retval EFI_SUCCESS The soft timer interrupt was generated.
+ @retval EFI_UNSUPPORTED The platform does not support the generation of soft timer interrupts.
+
+**/
+EFI_STATUS
+EFIAPI
+TimerDriverGenerateSoftInterrupt (
+ IN EFI_TIMER_ARCH_PROTOCOL *This
+ )
+{
+ return EFI_UNSUPPORTED;
+}
+
+
+
+/**
+ Interface stucture for the Timer Architectural Protocol.
+
+ @par Protocol Description:
+ This protocol provides the services to initialize a periodic timer
+ interrupt, and to register a handler that is called each time the timer
+ interrupt fires. It may also provide a service to adjust the rate of the
+ periodic timer interrupt. When a timer interrupt occurs, the handler is
+ passed the amount of time that has passed since the previous timer
+ interrupt.
+
+ @param RegisterHandler
+ Registers a handler that will be called each time the
+ timer interrupt fires. TimerPeriod defines the minimum
+ time between timer interrupts, so TimerPeriod will also
+ be the minimum time between calls to the registered
+ handler.
+
+ @param SetTimerPeriod
+ Sets the period of the timer interrupt in 100 nS units.
+ This function is optional, and may return EFI_UNSUPPORTED.
+ If this function is supported, then the timer period will
+ be rounded up to the nearest supported timer period.
+
+
+ @param GetTimerPeriod
+ Retrieves the period of the timer interrupt in 100 nS units.
+
+ @param GenerateSoftInterrupt
+ Generates a soft timer interrupt that simulates the firing of
+ the timer interrupt. This service can be used to invoke the registered handler if the timer interrupt has been masked for
+ a period of time.
+
+**/
+EFI_TIMER_ARCH_PROTOCOL gTimer = {
+ TimerDriverRegisterHandler,
+ TimerDriverSetTimerPeriod,
+ TimerDriverGetTimerPeriod,
+ TimerDriverGenerateSoftInterrupt
+};
+
+
+/**
+ Initialize the state information for the Timer Architectural Protocol and
+ the Timer Debug support protocol that allows the debugger to break into a
+ running program.
+
+ @param ImageHandle of the loaded driver
+ @param SystemTable Pointer to the System Table
+
+ @retval EFI_SUCCESS Protocol registered
+ @retval EFI_OUT_OF_RESOURCES Cannot allocate protocol data structure
+ @retval EFI_DEVICE_ERROR Hardware problems
+
+**/
+EFI_STATUS
+EFIAPI
+TimerInitialize (
+ IN EFI_HANDLE ImageHandle,
+ IN EFI_SYSTEM_TABLE *SystemTable
+ )
+{
+ EFI_HANDLE Handle = NULL;
+ EFI_STATUS Status;
+ UINT32 TimerBaseAddress;
+
+ // configure free running timer (TIMER1) for 1MHz operation\r
+ \r
+ // AND disable clock, OR configure 1MHz clock\r
+ MmioAndThenOr32 (EB_SP810_CTRL_BASE + SP810_SYS_CTRL_REG, ~SP810_SYS_CTRL_TIMER1_EN, SP810_SYS_CTRL_TIMER1_TIMCLK); \r
+\r
+ // Renable timer\r
+ MmioOr32 (EB_SP810_CTRL_BASE + SP810_SYS_CTRL_REG, SP810_SYS_CTRL_TIMER1_EN); \r
+ \r
+\r
+ // configure timer 1 for free running operation, 32 bits, no prescaler, interrupt disabled\r
+ MmioWrite32 (EB_SP804_TIMER1_BASE + SP804_TIMER_CONTROL_REG, SP804_TIMER_CTRL_32BIT | SP804_PRESCALE_DIV_1);\r
+\r
+ // enable the free running timer\r
+ MmioOr32 (EB_SP804_TIMER1_BASE + SP804_TIMER_CONTROL_REG, SP804_TIMER_CTRL_ENABLE);\r
+\r
+ // record free running tick value (should be close to 0xffffffff)\r
+ mLastTickCount = MmioRead32 (EB_SP804_TIMER1_BASE + SP804_TIMER_CURRENT_REG);\r
+\r
+ // Disable the timer
+ Status = TimerDriverSetTimerPeriod (&gTimer, 0);
+ ASSERT_EFI_ERROR (Status);
+\r
+ // Install interrupt handler for SP804 timer 0/1 interrupts\r
+ Status = mGic->RegisterInterruptHandler(mGic, EB_TIMER01_INTERRUPT_NUM, TimerInterruptHandler);\r
+ ASSERT_EFI_ERROR (Status);\r
+
+ // Install interrupt handler
+ gVector = EB_TIMER01_INTERRUPT_NUM;
+ Status = gInterrupt->RegisterInterruptSource (gInterrupt, gVector, TimerInterruptHandler);
+ ASSERT_EFI_ERROR (Status);
+\r
+\r
+ // configure periodic timer (TIMER0) for 1MHz operation\r
+ MmioAndThenOr32 (EB_SP810_CTRL_BASE + SP810_SYS_CTRL_REG, ~SP810_SYS_CTRL_TIMER0_EN, SP810_SYS_CTRL_TIMER0_TIMCLK);\r
+\r
+ // Renable timer\r
+ MmioOr32 (EB_SP810_CTRL_BASE + SP810_SYS_CTRL_REG, SP810_SYS_CTRL_TIMER0_EN); \r
+\r
+ // configure timer 0 for periodic operation, 32 bits, no prescaler, and interrupt enabled\r
+ MmioWrite32 (EB_SP804_TIMER0_BASE + SP804_TIMER_CONTROL_REG, SP804_TIMER_CTRL_PERIODIC | SP804_TIMER_CTRL_32BIT | SP804_PRESCALE_DIV_1 | SP804_TIMER_CTRL_INT_ENABLE);\r
+
+
+ // Set up default timer
+ Status = TimerDriverSetTimerPeriod (&gTimer, FixedPcdGet32(PcdTimerPeriod)); // TIMER_DEFAULT_PERIOD
+ ASSERT_EFI_ERROR (Status);
+
+ // Install the Timer Architectural Protocol onto a new handle
+ Status = gBS->InstallMultipleProtocolInterfaces(
+ &Handle,
+ &gEfiTimerArchProtocolGuid, &gTimer,
+ NULL
+ );
+ ASSERT_EFI_ERROR(Status);
+
+ return Status;
+}
+
projects / mirror_edk2.git / commitdiff