--- /dev/null
+#/*++\r
+# \r
+# Copyright (c) 2006 - 2007, Intel Corporation \r
+# All rights reserved. This program and the accompanying materials \r
+# are licensed and made available under the terms and conditions of the BSD License \r
+# which accompanies this distribution. The full text of the license may be found at \r
+# http://opensource.org/licenses/bsd-license.php \r
+# \r
+# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, \r
+# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. \r
+# \r
+# Module Name:\r
+#\r
+# Config.env\r
+# \r
+# Abstract:\r
+# \r
+# This file is used to define platform build configuration.\r
+# It gets included by PlatformTools.env.\r
+# \r
+#--*/\r
+\r
+BUILD_TARGET_DIRECTORY = Build\r
+EFI_DEBUG = NO\r
+EFI_DEBUG_CLEAR_MEMORY = NO\r
+EFI_PEI_PERFORMANCE = NO\r
+EFI_DXE_PERFORMANCE = NO\r
+EFI_SYMBOLIC_DEBUG = NO\r
+EFI_GENERATE_INTERMEDIATE_FILE = NO\r
+EFI_PEI_REPORT_STATUS_CODE = NO\r
+UEFI_MODE = YES\r
+PI_MODE = YES\r
+USE_VC8 = NO\r
--- /dev/null
+#/*++\r
+#\r
+# Copyright (c) 2004 - 2007, Intel Corporation \r
+# All rights reserved. This program and the accompanying materials \r
+# are licensed and made available under the terms and conditions of the BSD License \r
+# which accompanies this distribution. The full text of the license may be found at \r
+# http://opensource.org/licenses/bsd-license.php \r
+# \r
+# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, \r
+# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. \r
+# \r
+# Module Name:\r
+#\r
+# Ia32.dsc\r
+#\r
+# Abstract:\r
+#\r
+# This is the build description file containing the platform \r
+# build definitions.\r
+#\r
+#\r
+# Notes:\r
+# \r
+# The info in this file is broken down into sections. The start of a section\r
+# is designated by a "[" in the first column. So the [=====] separater ends\r
+# a section.\r
+# \r
+#--*/\r
+\r
+\r
+[=============================================================================]\r
+#\r
+# This section gets processed first by the utility. Define any\r
+# macros that you may use elsewhere in this description file. This is the\r
+# mechanism by which you can pass parameters and defines to the makefiles\r
+# generated for each component. You can define it here, and then make an\r
+# assignment in the [makefile.common] section. For example, if here you\r
+# define MY_VAR = my_var_value, then you can add MY_VAR = $(MY_VAR) in\r
+# the [makefile.common] section and it becomes MY_VAR = my_var_value in\r
+# the output makefiles for each component.\r
+#\r
+[Defines]\r
+PLATFORM = $(PROJECT_NAME)\r
+\r
+[=============================================================================]\r
+#\r
+# Include other common build descriptions\r
+#\r
+!include "$(EDK_SOURCE)\Sample\Platform\Common.dsc"\r
+!include "$(EDK_SOURCE)\Sample\Platform\Common$(PROCESSOR).dsc"\r
+\r
+[=============================================================================]\r
+#\r
+# These control the generation of the FV files\r
+#\r
+[=============================================================================]\r
+[Fv.Fv.Attributes]\r
+\r
+[Fv.Fv.options]\r
+\r
+[Build.Fv.Fv]\r
+\r
+[=============================================================================]\r
+#\r
+# These are the libraries that will be built by the master makefile\r
+#\r
+[=============================================================================]\r
+[Libraries]\r
+DEFINE EDK_PREFIX=\r
+\r
+!include "$(EDK_SOURCE)\Sample\Platform\EdkLibAll.dsc"\r
+\r
+#\r
+# EdkII Glue Library\r
+#\r
+#!include "$(EDK_SOURCE)\Sample\Platform\EdkIIGlueLibAll.dsc"\r
+\r
+[=============================================================================]\r
+#\r
+# These are platform specific libraries that must be built prior to building\r
+# certain drivers that depend upon them.\r
+#\r
+[=============================================================================]\r
+[Libraries.Platform]\r
+Sample\Platform\Generic\RuntimeDxe\StatusCode\Lib\BsDataHubStatusCode\BsDataHubStatusCode.inf\r
+Sample\Platform\Generic\RuntimeDxe\StatusCode\Lib\RtMemoryStatusCode\RtMemoryStatusCode.inf\r
+Sample\Platform\Generic\RuntimeDxe\StatusCode\Lib\RtPlatformStatusCode\$(PROJECT_NAME)\RtPlatformStatusCode.inf\r
+\r
+#Other\Maintained\Application\Shell\Library\EfiShellLib.inf\r
+\r
+[=============================================================================]\r
+#\r
+# These are the components that will be built by the master makefile\r
+#\r
+[=============================================================================]\r
+[Components]\r
+DEFINE PACKAGE=Default\r
+\r
+#Add EDK INF file here:\r
+#Other\Maintained\Application\Shell\ShellFull.inf\r
+\r
+[=============================================================================]\r
+\r
--- /dev/null
+#/*++\r
+#\r
+# Copyright (c) 2004 - 2007, Intel Corporation \r
+# All rights reserved. This program and the accompanying materials \r
+# are licensed and made available under the terms and conditions of the BSD License \r
+# which accompanies this distribution. The full text of the license may be found at \r
+# http://opensource.org/licenses/bsd-license.php \r
+# \r
+# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, \r
+# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. \r
+# \r
+# Module Name:\r
+# \r
+# Makefile\r
+# \r
+# Abstract:\r
+# \r
+# This makefile is used to build the NT emulation.\r
+# \r
+#--*/\r
+\r
+#\r
+# Everything depends on EDK_SOURCE & EDK_TOOLS_PATH. Make sure it's defined\r
+#\r
+!IFNDEF EDK_SOURCE\r
+!ERROR EDK_SOURCE environmental variable not set \r
+!ENDIF\r
+\r
+!IFNDEF EDK_TOOLS_PATH\r
+!MESSAGE EDK_TOOLS_PATH environmental variable not set, default setting used\r
+!ENDIF\r
+\r
+#\r
+# Set the processor type\r
+#\r
+PROCESSOR = IA32\r
+\r
+#\r
+# Define a toolchain so we can pick up the basic defines from\r
+# the EFI tool setup file.\r
+#\r
+TOOLCHAIN = TOOLCHAIN_MSVC\r
+\r
+!INCLUDE PlatformTools.env\r
+\r
+#\r
+# Default target\r
+#\r
+all : customer\r
+\r
+#\r
+# Target to build customer config\r
+#\r
+customer : tempstamp_file build_tools makefiles builds\r
+\r
+#\r
+# Target to build everything quickly\r
+#\r
+fast : build_tools fast_makefiles builds\r
+\r
+#\r
+# Create a file to store the date and time, and used by SetStamp.exe\r
+#\r
+tempstamp_file:\r
+!IF DEFINED(DATE_STAMP) && DEFINED(TIME_STAMP)\r
+ @echo $(DATE_STAMP) $(TIME_STAMP) > GenStamp.txt\r
+!ELSEIF EXIST(GenStamp.txt)\r
+ - @del GenStamp.txt\r
+!ENDIF\r
+\r
+#\r
+# Make all the EFI build tools by calling the makefile\r
+#\r
+build_tools :\r
+ -if not exist $(EDK_TOOLS_OUTPUT) mkdir $(EDK_TOOLS_OUTPUT)\r
+ -if exist $(EDK_TOOLS_BIN)\*.* copy $(EDK_TOOLS_BIN)\*.* $(EDK_TOOLS_OUTPUT)\r
+ $(MAKE) -f $(EDK_TOOLS_SOURCE)\makefile PROCESSOR=$(PROCESSOR) BUILD_DIR=$(BUILD_DIR)\r
+ $(GUIDCHK) -b $(EDK_TOOLS_OUTPUT)\GuidDatabase.txt \r
+\r
+#\r
+# Run ProcessDsc on our main description files to generate the\r
+# makefiles and package files. Specify -v option for more verbose output.\r
+# Specify "-xref filename" to generate a cross-reference file of \r
+# basename-to-fileguid that can be used by VolInfo.\r
+#\r
+makefiles : \r
+ $(PROCESSDSC) \\r
+ -d EFI_SOURCE=$(EDK_SOURCE) \\r
+ -d EDK_SOURCE=$(EDK_SOURCE) \\r
+ -d PROCESSOR=$(PROCESSOR) \\r
+ -d PROJECT_NAME=$(PROJECT_NAME) \\r
+ -d COMPRESS_METHOD=$(COMPRESS_METHOD) \\r
+ -d OEMTOOLPATH=$(EDK_TOOLS_OUTPUT) \\r
+ -d SHELL_INF=$(SHELL_INF) \\r
+ -d UEFI_PREFIX=$(UEFI_PREFIX) \\r
+ -d PI_PREFIX=$(PI_PREFIX) \\r
+ -d CAPSULE_INF=$(CAPSULE_INF) \\r
+ -d ATAPI_PASS_THRU_INF=$(ATAPI_PASS_THRU_INF) \\r
+ -d DEVPATH_INF=$(DEVPATH_INF) \\r
+ -d GRAPHICS_INF=$(GRAPHICS_INF) \\r
+ -g $(EDK_TOOLS_OUTPUT)\GuidDatabase.txt \\r
+ -xref FV\Guid.xref \\r
+ $(PROJECT_NAME).dsc\r
+ \r
+#\r
+# Build faster by not building components with FV=NULL. Override in the\r
+# DSC file by adding SKIP_FV_NULL=0 on the component lines you want built\r
+# but still have FV=NULL. For example:\r
+#\r
+# Dxe\Drivers\MyDriver\MyDriver.inf FV=NULL SKIP_FV_NULL=0\r
+#\r
+fast_makefiles : \r
+ $(PROCESSDSC) \\r
+ -d EFI_SOURCE=$(EDK_SOURCE) \\r
+ -d EDK_SOURCE=$(EDK_SOURCE) \\r
+ -d PROCESSOR=$(PROCESSOR) \\r
+ -d PROJECT_NAME=$(PROJECT_NAME) \\r
+ -d COMPRESS_METHOD=$(COMPRESS_METHOD) \\r
+ -d OEMTOOLPATH=$(EDK_TOOLS_OUTPUT) \\r
+ -d SHELL_INF=$(SHELL_INF) \\r
+ -d UEFI_PREFIX=$(UEFI_PREFIX) \\r
+ -d PI_PREFIX=$(PI_PREFIX) \\r
+ -d CAPSULE_INF=$(CAPSULE_INF) \\r
+ -d ATAPI_PASS_THRU_INF=$(ATAPI_PASS_THRU_INF) \\r
+ -d DEVPATH_INF=$(DEVPATH_INF) \\r
+ -d GRAPHICS_INF=$(GRAPHICS_INF) \\r
+ -g $(EDK_TOOLS_OUTPUT)\GuidDatabase.txt \\r
+ -xref FV\Guid.xref \\r
+ -d SKIP_FV_NULL=1 \\r
+ $(PROJECT_NAME).dsc\r
+\r
+#\r
+# Create the guid-to-basename cross reference file of protocols\r
+# used by volinfo for decoding dependency expressions.\r
+#\r
+protocols.xref : \r
+ -@if not exist fv mkdir FV\r
+ cd $(EDK_SOURCE)\r
+ $(GUIDCHK) -g -u $(BUILD_TARGET_DIRECTORY) -e inf -x > $(BUILD_DIR)\Fv\protocols.xref\r
+ cd $(BUILD_DIR)\r
+\r
+#\r
+# Call all the makefiles that were generated by ProcessDsc. ProcessDsc\r
+# creates the makefile.out that calls all the component makefiles.\r
+#\r
+builds :\r
+ $(MAKE) -f makefile.out\r
+\r
+#\r
+# Useful targets\r
+#\r
+\r
+#\r
+# Define a pseudo-target that skips over compiling the build tools and\r
+# also skips creation of the makefiles for the components. The user\r
+# has to be aware that any changes to INF files renders this target\r
+# invalid.\r
+#\r
+quick : builds\r
+\r
+#\r
+# Define a pseudo-target to start building with the libraries or with the \r
+# components.\r
+#\r
+libraries :\r
+ $(MAKE) -f makefile.out libraries\r
+\r
+components :\r
+ $(MAKE) -f makefile.out components\r
+\r
+#\r
+# Make a pseudo-target to simplify running of the NT emulation. \r
+#\r
+!IF "$(EFI_WIN_NT_FILE_SYSTEM)" == ""\r
+EFI_WIN_NT_FILE_SYSTEM = $(EDK_SOURCE)\Other\Maintained\Application\$(UEFI_PREFIX)Shell\bin\ia32\Apps\r
+!ELSE\r
+EFI_WIN_NT_FILE_SYSTEM = $(EFI_WIN_NT_FILE_SYSTEM)!$(EDK_SOURCE)\Other\Maintained\Application\$(UEFI_PREFIX)Shell\bin\ia32\Apps\r
+!ENDIF\r
+\r
+#\r
+# Make browse info file\r
+#\r
+bsc:\r
+ - dir /s /b *.sbr > $(PROCESSOR)\temp.rm\r
+ $(BSCMAKE) /n /o $(PROCESSOR)\$(PROJECT_NAME).bsc "@$(PROCESSOR)\temp.rm"\r
+\r
+#\r
+# Create a target to clean up all build directories\r
+#\r
+clean :\r
+ - @if exist vc??.* del vc??.* > NUL\r
+ - @if exist *.bak del *.bak > NUL\r
+ - @if exist $(PROCESSOR) rd /s /q $(PROCESSOR) > NUL\r
+ - @if exist ipf rd /s /q ipf > NUL\r
+ - @if exist ebc rd /s /q ebc > NUL\r
+ - @if exist fv rd /s /q fv > NUL\r
+ - @if exist Tools rd /s /q Tools > NUL\r
+ - @if exist makefile.out del makefile.out > NUL\r
+ - @if exist module.* del module.* > NUL\r
+ - @echo All targets cleaned\r
+\r
+#\r
+# Clean up all build directories except for tools.\r
+#\r
+cleanbuilds :\r
+ - @if exist *.bak del *.bak > NUL\r
+ - @if exist $(PROCESSOR) rd /s /q $(PROCESSOR) > NUL\r
+ - @if exist ipf rd /s /q ipf > NUL\r
+ - @if exist ebc rd /s /q ebc > NUL\r
+ - @if exist fv rd /s /q fv > NUL\r
+ - @if exist makefile.out del makefile.out > NUL\r
+ - @if exist module.* del module.* > NUL\r
+ - @echo All modules cleaned\r
+\r
+#\r
+# Clean up only the tools\r
+#\r
+cleantools :\r
+ - @if exist vc??.* del vc??.* > NUL\r
+ - @if exist Tools rd /s /q Tools > NUL\r
+ - @echo All tools cleaned\r
+\r
+#\r
+# Rebuild target, clean and build all\r
+#\r
+rebuild : clean all\r
+\r
+#\r
+# cleanall target to clean all build directories.\r
+#\r
+cleanall : clean\r
--- /dev/null
+#/*++\r
+# \r
+# Copyright (c) 2004 - 2007, Intel Corporation \r
+# All rights reserved. This program and the accompanying materials \r
+# are licensed and made available under the terms and conditions of the BSD License \r
+# which accompanies this distribution. The full text of the license may be found at \r
+# http://opensource.org/licenses/bsd-license.php \r
+# \r
+# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, \r
+# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. \r
+# \r
+# Module Name:\r
+#\r
+# PlatformTools.env\r
+# \r
+# Abstract:\r
+# \r
+# This file is used to define platform specific environment variables.\r
+# It gets included by every makefile.\r
+# \r
+#--*/\r
+\r
+!INCLUDE Config.env\r
+\r
+#\r
+# Set the project name\r
+#\r
+PROJECT_NAME = Ia32\r
+\r
+#\r
+# Set the build directory\r
+#\r
+BUILD_DIR = $(EDK_SOURCE)\Sample\Platform\$(PROJECT_NAME)\$(BUILD_TARGET_DIRECTORY)\r
+\r
+!IF "$(UEFI_MODE)" == "YES"\r
+GRAPHICS_INF = Sample\Bus\WinNtThunk\Gop\Dxe\WinNtGop.inf\r
+!ELSE\r
+GRAPHICS_INF = Sample\Bus\WinNtThunk\Uga\Dxe\WinNtUga.inf\r
+!ENDIF\r
+\r
+#\r
+# Define compiler names\r
+#\r
+!IFNDEF EDK_TOOLS_PATH\r
+EFI_ASL_LOCAL = YES\r
+!ELSE \r
+EFI_ASSEMBLER_NAME = Masm611\r
+EFI_ASL_LOCAL = NO\r
+!ENDIF\r
+\r
+#\r
+# These flags are specific to this platform. If a flag is not specific to this \r
+# platform the flag should be placed in the CommonTools.env file.\r
+# Processor architecture specific and global macros can be found in \r
+# CommonTools.env, macros named xxx_ARCH_FLAGS and xxx_STD_FLAGS respectively.\r
+#\r
+C_PROJ_FLAGS = /O1 /D UNICODE /D NEW_PEI_HOBS\r
+ASM_PROJ_FLAGS = /Cx /Zd /Fl$*.lst\r
+LINK_PROJ_FLAGS =\r
+LIB_PROJ_FLAGS =\r
+EBC_C_PROJ_FLAGS =\r
+EBC_LINK_PROJ_FLAGS =\r
+EBC_LIB_PROJ_FLAGS =\r
+\r
+#\r
+# Include processor architecture specific and general Tiano build flags.\r
+#\r
+!INCLUDE $(EDK_SOURCE)\Sample\CommonTools.env\r
--- /dev/null
+@rem #/*++\r
+@rem # \r
+@rem # Copyright (c) 2007, Intel Corporation \r
+@rem # All rights reserved. This program and the accompanying materials \r
+@rem # are licensed and made available under the terms and conditions of the BSD License \r
+@rem # which accompanies this distribution. The full text of the license may be found at \r
+@rem # http://opensource.org/licenses/bsd-license.php \r
+@rem # \r
+@rem # THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, \r
+@rem # WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. \r
+@rem # \r
+@rem # Module Name:\r
+@rem # \r
+@rem # build.bat\r
+@rem # \r
+@rem # Abstract:\r
+@rem # \r
+@rem # This script provides single module build, clean and find function\r
+@rem # based on module name.\r
+@rem # \r
+@rem # The auto-generated module.list file records all module names \r
+@rem # described in the current platform.dsc.\r
+@rem # \r
+@rem #--*/ \r
+\r
+@echo off\r
+\r
+setlocal\r
+@rem initilize local variable\r
+set FUNCTION=build\r
+set MODULE=\r
+set UPDATE=\r
+set VERBOSE=\r
+\r
+:parse\r
+if /I "%1"=="/c" (\r
+ set FUNCTION=clean\r
+ shift\r
+ goto parse\r
+)\r
+if /I "%1"=="clean" (\r
+ set FUNCTION=clean\r
+ shift\r
+ goto parse\r
+)\r
+if /I "%1"=="/r" (\r
+ set FUNCTION=rebuild\r
+ shift\r
+ goto parse\r
+)\r
+if /I "%1"=="/h" (\r
+ set FUNCTION=usage\r
+ shift\r
+ goto parse\r
+)\r
+if /I "%1"=="/?" (\r
+ set FUNCTION=usage\r
+ shift\r
+ goto parse\r
+)\r
+if /I "%1"=="/f" (\r
+ set FUNCTION=find\r
+ shift\r
+ goto parse\r
+)\r
+if /I "%1"=="/a" (\r
+ set UPDATE=TRUE\r
+ shift\r
+ goto parse\r
+)\r
+if /I "%1"=="/v" (\r
+ set VERBOSE=TRUE\r
+ shift\r
+ goto parse\r
+)\r
+if not "%1"=="" (\r
+ set MODULE=%1\r
+ shift\r
+ goto parse\r
+) else (\r
+ @rem no other paramters\r
+ if "%FUNCTION%"=="rebuild" goto build\r
+ goto %FUNCTION%\r
+)\r
+\r
+:build\r
+set StartTime=%time%\r
+@rem if no input, build all\r
+if "%MODULE%"=="" (\r
+ if "%FUNCTION%"=="rebuild" (\r
+ nmake -nologo -f Makefile clean\r
+ )\r
+ nmake -nologo -f Makefile all\r
+ goto endtime\r
+)\r
+@rem then try to build special targets: all, fast, tools.\r
+if /I "%MODULE%"=="all" (\r
+ @rem build all modules and tools.\r
+ if "%FUNCTION%"=="rebuild" (\r
+ nmake -nologo -f Makefile cleanall\r
+ )\r
+ nmake -nologo -f Makefile all\r
+ goto endtime\r
+)\r
+if /I "%MODULE%"=="fast" (\r
+ @rem build fast target to skip FV=NULL modules.\r
+ if "%FUNCTION%"=="rebuild" (\r
+ nmake -nologo -f Makefile clean\r
+ )\r
+ nmake -nologo -f Makefile fast\r
+ goto endtime\r
+)\r
+if /I "%MODULE%"=="tools" (\r
+ @rem build all tools.\r
+ if "%FUNCTION%"=="rebuild" (\r
+ nmake -nologo -f Makefile cleantools\r
+ )\r
+ nmake -nologo -f Makefile build_tools\r
+ echo.\r
+ echo All tools are built.\r
+ goto endtime\r
+)\r
+@rem build single module, update build makefiles\r
+if "%FUNCTION%"=="rebuild" (\r
+ nmake -nologo -f module.mak %MODULE%Clean 2>NUL\r
+)\r
+nmake -nologo -f Makefile flashmap > NUL 2>&1\r
+nmake -nologo -f Makefile makefiles\r
+if errorlevel 1 goto builderror\r
+@rem check whether input module name is described in current dsc file. \r
+findstr /I /C:" %MODULE% " module.list > NUL\r
+if errorlevel 1 (\r
+ echo.\r
+ echo.\r
+ findstr /I /C:"%MODULE%" module.list > NUL\r
+ if errorlevel 1 goto finderror\r
+ for /F %%A in ('findstr /I /C:"%MODULE%" module.list') do echo %%A\r
+ echo.\r
+ echo Warning!!! Your specified module name can't be found. \r
+ echo One of the above modules may be what you want to build.\r
+ goto end\r
+)\r
+@rem build this module\r
+nmake -nologo -f module.mak %MODULE%Build \r
+echo.\r
+if "%FUNCTION%"=="rebuild" (\r
+ echo Module %MODULE% is rebuilt.\r
+) else (\r
+ echo Module %MODULE% is built.\r
+)\r
+:endtime\r
+@rem output build time.\r
+set EndTime=%time%\r
+echo.\r
+echo Start time %StartTime%\r
+echo End time %EndTime%\r
+goto end\r
+\r
+:clean\r
+@rem if no input, default clean all build directories.\r
+if "%MODULE%"=="" (\r
+ nmake -nologo -f Makefile clean\r
+ goto end\r
+)\r
+@rem first try to clean special tasks: all, modules and tools\r
+if /I "%MODULE%"=="all" (\r
+ nmake -nologo -f Makefile cleanall\r
+ goto end\r
+)\r
+if /I "%MODULE%"=="modules" (\r
+ nmake -nologo -f Makefile cleanbuilds\r
+ goto end\r
+)\r
+if /I "%MODULE%"=="tools" (\r
+ nmake -nologo -f Makefile cleantools\r
+ goto end\r
+)\r
+@rem clean single module \r
+@rem check whether input module name is in module.list file. \r
+if not exist module.list (\r
+ echo Module list info doesn't exist.\r
+ echo Processing dsc file to generate module list info.\r
+ nmake -nologo -f Makefile flashmap > NUL 2>&1\r
+ nmake -nologo -f Makefile makefiles > error.log 2>&1\r
+ if errorlevel 1 goto builderror\r
+)\r
+findstr /I /C:" %MODULE% " module.list > NUL\r
+if errorlevel 1 (\r
+ echo.\r
+ findstr /I /C:"%MODULE%" module.list > NUL\r
+ if errorlevel 1 goto finderror\r
+ for /F %%A in ('findstr /I /C:"%MODULE%" module.list') do echo %%A\r
+ echo.\r
+ echo Warning!!! Your specified module name can't be found. \r
+ echo One of the above modules may be what you want to clean. \r
+ goto end\r
+)\r
+@rem clean this module \r
+nmake -nologo -f module.mak %MODULE%Clean 2>NUL\r
+echo.\r
+echo Module %MODULE% is cleaned.\r
+goto end\r
+\r
+:find\r
+@rem find match module name by subname.\r
+if "%UPDATE%"=="TRUE" (\r
+ echo Processing dsc file to update module list info.\r
+ nmake -nologo -f Makefile flashmap > NUL 2>&1\r
+ nmake -nologo -f Makefile makefiles > error.log 2>&1\r
+ if errorlevel 1 goto builderror\r
+)\r
+if not exist module.list (\r
+ echo Module list info doesn't exist.\r
+ echo Processing dsc file to generate module list info.\r
+ nmake -nologo -f Makefile flashmap > NUL 2>&1\r
+ nmake -nologo -f Makefile makefiles > error.log 2>&1\r
+ if errorlevel 1 goto builderror\r
+)\r
+if "%MODULE%"=="" (\r
+ @rem display all\r
+ echo.\r
+ if "%VERBOSE%"=="TRUE" ( \r
+ type module.list\r
+ ) else (\r
+ @rem only output module name without module.inf file name\r
+ for /F %%A in (module.list) do echo %%A\r
+ )\r
+) else (\r
+ @rem display match module name\r
+ echo.\r
+ if "%VERBOSE%"=="TRUE" (\r
+ findstr /I /C:"%MODULE%" module.list\r
+ if errorlevel 1 goto notfind\r
+ ) else (\r
+ findstr /I /C:"%MODULE%" module.list > NUL\r
+ if errorlevel 1 goto notfind\r
+ for /F %%A in ('findstr /I /C:"%MODULE%" module.list') do echo %%A\r
+ )\r
+)\r
+goto end\r
+\r
+:usage\r
+echo build or clean single module based on module name after tools are built.\r
+echo.\r
+echo build [/r] [/c] [/f] [/h] [modulename]\r
+echo.\r
+echo build [/r] [modulename]\r
+echo build single module, such as build DxeMain.\r
+echo If /r is specified, the target will be rebuit after cleaned first.\r
+echo if no input modulename or modulename is all, then build all\r
+echo Specail build targets: all, fast, tools.\r
+echo These special targets may not exist in your tip main makefile.\r
+echo build - build all tools and modules\r
+echo build all - build all tools and modules\r
+echo build fast - build all without FV=NULL modules\r
+echo build tools - build all tools.\r
+echo.\r
+echo build /c [modulename]\r
+echo build clean [modulename]\r
+echo remove the temp generated files for single module \r
+echo if no input modulename, then clean all\r
+echo Specail clean targets: all, modules, tools.\r
+echo These special targets may not exist in your tip main makefile.\r
+echo build /c - clean up all build directories\r
+echo build /c all - clean up all build directories and binary dirs.\r
+echo build /c modules - clean up all build directories except for tools.\r
+echo build /c tools - clean up only tools directory.\r
+echo.\r
+echo build /f [/a] [/v] [subname]\r
+echo find all matched modulename with the sub string of module name.\r
+echo option /a re-processes dsc files to update module name list.\r
+echo option /v outputs module name and module.inf file name both.\r
+echo.\r
+echo build /h\r
+echo build /?\r
+echo display help information. \r
+echo.\r
+goto end\r
+\r
+:notfind\r
+echo Warning!!! Your specified module name can't be found.\r
+echo Try to use /f /a options to update module name list.\r
+goto end\r
+\r
+:finderror\r
+echo Warning!!! Your specified module name can't be found.\r
+echo Try to use /f to find modules that you want to build.\r
+echo Or use /h to get the helpinfo of this script.\r
+goto end\r
+\r
+:builderror\r
+if exist error.log type error.log\r
+echo.\r
+if not exist Tools\ProcessDsc.exe (\r
+ echo.\r
+ echo Error!!! Build tools may not be ready. Try to build tools first.\r
+ echo.\r
+)\r
+del module.* > NUL 2>&1\r
+goto end\r
+\r
+:end\r
+if exist error.log del error.log\r
+echo on\r
[Components]\r
DEFINE PACKAGE=Default\r
\r
+#Add EDK INF file here:\r
#Other\Maintained\Application\Shell\Shell.inf\r
-Other\Maintained\Application\Shell\ShellFull.inf\r
+\r
\r
[=============================================================================]\r
+++ /dev/null
-#/*++\r
-# \r
-# Copyright (c) 2006 - 2007, Intel Corporation \r
-# All rights reserved. This program and the accompanying materials \r
-# are licensed and made available under the terms and conditions of the BSD License \r
-# which accompanies this distribution. The full text of the license may be found at \r
-# http://opensource.org/licenses/bsd-license.php \r
-# \r
-# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, \r
-# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. \r
-# \r
-# Module Name:\r
-#\r
-# Config.env\r
-# \r
-# Abstract:\r
-# \r
-# This file is used to define platform build configuration.\r
-# It gets included by PlatformTools.env.\r
-# \r
-#--*/\r
-\r
-BUILD_TARGET_DIRECTORY = Build\r
-EFI_DEBUG = YES\r
-EFI_DEBUG_CLEAR_MEMORY = YES\r
-EFI_PEI_PERFORMANCE = YES\r
-EFI_DXE_PERFORMANCE = YES\r
-EFI_SYMBOLIC_DEBUG = YES\r
-EFI_GENERATE_INTERMEDIATE_FILE = NO\r
-EFI_PEI_REPORT_STATUS_CODE = YES\r
-UEFI_MODE = YES\r
-PI_MODE = YES\r
-USE_VC8 = NO\r
+++ /dev/null
-#/*++\r
-#\r
-# Copyright (c) 2004 - 2007, Intel Corporation \r
-# All rights reserved. This program and the accompanying materials \r
-# are licensed and made available under the terms and conditions of the BSD License \r
-# which accompanies this distribution. The full text of the license may be found at \r
-# http://opensource.org/licenses/bsd-license.php \r
-# \r
-# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, \r
-# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. \r
-# \r
-# Module Name:\r
-# \r
-# Makefile\r
-# \r
-# Abstract:\r
-# \r
-# This makefile is used to build the NT emulation.\r
-# \r
-#--*/\r
-\r
-#\r
-# Everything depends on EDK_SOURCE & EDK_TOOLS_PATH. Make sure it's defined\r
-#\r
-!IFNDEF EDK_SOURCE\r
-!ERROR EDK_SOURCE environmental variable not set \r
-!ENDIF\r
-\r
-!IFNDEF EDK_TOOLS_PATH\r
-!MESSAGE EDK_TOOLS_PATH environmental variable not set, default setting used\r
-!ENDIF\r
-\r
-#\r
-# Set the processor type\r
-#\r
-PROCESSOR = IA32\r
-\r
-#\r
-# Define a toolchain so we can pick up the basic defines from\r
-# the EFI tool setup file.\r
-#\r
-TOOLCHAIN = TOOLCHAIN_MSVC\r
-\r
-!INCLUDE PlatformTools.env\r
-\r
-#\r
-# Default target\r
-#\r
-all : customer\r
-\r
-#\r
-# Target to build customer config\r
-#\r
-customer : tempstamp_file build_tools makefiles builds\r
-\r
-#\r
-# Target to build everything quickly\r
-#\r
-fast : build_tools fast_makefiles builds\r
-\r
-#\r
-# Create a file to store the date and time, and used by SetStamp.exe\r
-#\r
-tempstamp_file:\r
-!IF DEFINED(DATE_STAMP) && DEFINED(TIME_STAMP)\r
- @echo $(DATE_STAMP) $(TIME_STAMP) > GenStamp.txt\r
-!ELSEIF EXIST(GenStamp.txt)\r
- - @del GenStamp.txt\r
-!ENDIF\r
-\r
-#\r
-# Make all the EFI build tools by calling the makefile\r
-#\r
-build_tools :\r
- -if not exist $(EDK_TOOLS_OUTPUT) mkdir $(EDK_TOOLS_OUTPUT)\r
- -if exist $(EDK_TOOLS_BIN)\*.* copy $(EDK_TOOLS_BIN)\*.* $(EDK_TOOLS_OUTPUT)\r
- $(MAKE) -f $(EDK_TOOLS_SOURCE)\makefile PROCESSOR=$(PROCESSOR) BUILD_DIR=$(BUILD_DIR)\r
- $(GUIDCHK) -b $(EDK_TOOLS_OUTPUT)\GuidDatabase.txt \r
-\r
-#\r
-# Run ProcessDsc on our main description files to generate the\r
-# makefiles and package files. Specify -v option for more verbose output.\r
-# Specify "-xref filename" to generate a cross-reference file of \r
-# basename-to-fileguid that can be used by VolInfo.\r
-#\r
-makefiles : \r
- $(PROCESSDSC) \\r
- -d EFI_SOURCE=$(EDK_SOURCE) \\r
- -d EDK_SOURCE=$(EDK_SOURCE) \\r
- -d PROCESSOR=$(PROCESSOR) \\r
- -d PROJECT_NAME=$(PROJECT_NAME) \\r
- -d COMPRESS_METHOD=$(COMPRESS_METHOD) \\r
- -d OEMTOOLPATH=$(EDK_TOOLS_OUTPUT) \\r
- -d SHELL_INF=$(SHELL_INF) \\r
- -d UEFI_PREFIX=$(UEFI_PREFIX) \\r
- -d PI_PREFIX=$(PI_PREFIX) \\r
- -d CAPSULE_INF=$(CAPSULE_INF) \\r
- -d ATAPI_PASS_THRU_INF=$(ATAPI_PASS_THRU_INF) \\r
- -d DEVPATH_INF=$(DEVPATH_INF) \\r
- -d GRAPHICS_INF=$(GRAPHICS_INF) \\r
- -g $(EDK_TOOLS_OUTPUT)\GuidDatabase.txt \\r
- -xref FV\Guid.xref \\r
- $(PROJECT_NAME).dsc\r
- \r
-#\r
-# Build faster by not building components with FV=NULL. Override in the\r
-# DSC file by adding SKIP_FV_NULL=0 on the component lines you want built\r
-# but still have FV=NULL. For example:\r
-#\r
-# Dxe\Drivers\MyDriver\MyDriver.inf FV=NULL SKIP_FV_NULL=0\r
-#\r
-fast_makefiles : \r
- $(PROCESSDSC) \\r
- -d EFI_SOURCE=$(EDK_SOURCE) \\r
- -d EDK_SOURCE=$(EDK_SOURCE) \\r
- -d PROCESSOR=$(PROCESSOR) \\r
- -d PROJECT_NAME=$(PROJECT_NAME) \\r
- -d COMPRESS_METHOD=$(COMPRESS_METHOD) \\r
- -d OEMTOOLPATH=$(EDK_TOOLS_OUTPUT) \\r
- -d SHELL_INF=$(SHELL_INF) \\r
- -d UEFI_PREFIX=$(UEFI_PREFIX) \\r
- -d PI_PREFIX=$(PI_PREFIX) \\r
- -d CAPSULE_INF=$(CAPSULE_INF) \\r
- -d ATAPI_PASS_THRU_INF=$(ATAPI_PASS_THRU_INF) \\r
- -d DEVPATH_INF=$(DEVPATH_INF) \\r
- -d GRAPHICS_INF=$(GRAPHICS_INF) \\r
- -g $(EDK_TOOLS_OUTPUT)\GuidDatabase.txt \\r
- -xref FV\Guid.xref \\r
- -d SKIP_FV_NULL=1 \\r
- $(PROJECT_NAME).dsc\r
-\r
-#\r
-# Create the guid-to-basename cross reference file of protocols\r
-# used by volinfo for decoding dependency expressions.\r
-#\r
-protocols.xref : \r
- -@if not exist fv mkdir FV\r
- cd $(EDK_SOURCE)\r
- $(GUIDCHK) -g -u $(BUILD_TARGET_DIRECTORY) -e inf -x > $(BUILD_DIR)\Fv\protocols.xref\r
- cd $(BUILD_DIR)\r
-\r
-#\r
-# Call all the makefiles that were generated by ProcessDsc. ProcessDsc\r
-# creates the makefile.out that calls all the component makefiles.\r
-#\r
-builds :\r
- $(MAKE) -f makefile.out\r
-\r
-#\r
-# Useful targets\r
-#\r
-\r
-#\r
-# Define a pseudo-target that skips over compiling the build tools and\r
-# also skips creation of the makefiles for the components. The user\r
-# has to be aware that any changes to INF files renders this target\r
-# invalid.\r
-#\r
-quick : builds\r
-\r
-#\r
-# Define a pseudo-target to start building with the libraries or with the \r
-# components.\r
-#\r
-libraries :\r
- $(MAKE) -f makefile.out libraries\r
-\r
-components :\r
- $(MAKE) -f makefile.out components\r
-\r
-#\r
-# Make a pseudo-target to simplify running of the NT emulation. \r
-#\r
-!IF "$(EFI_WIN_NT_FILE_SYSTEM)" == ""\r
-EFI_WIN_NT_FILE_SYSTEM = $(EDK_SOURCE)\Other\Maintained\Application\$(UEFI_PREFIX)Shell\bin\ia32\Apps\r
-!ELSE\r
-EFI_WIN_NT_FILE_SYSTEM = $(EFI_WIN_NT_FILE_SYSTEM)!$(EDK_SOURCE)\Other\Maintained\Application\$(UEFI_PREFIX)Shell\bin\ia32\Apps\r
-!ENDIF\r
-\r
-#\r
-# Make browse info file\r
-#\r
-bsc:\r
- - dir /s /b *.sbr > $(PROCESSOR)\temp.rm\r
- $(BSCMAKE) /n /o $(PROCESSOR)\$(PROJECT_NAME).bsc "@$(PROCESSOR)\temp.rm"\r
-\r
-#\r
-# Create a target to clean up all build directories\r
-#\r
-clean :\r
- - @if exist vc??.* del vc??.* > NUL\r
- - @if exist *.bak del *.bak > NUL\r
- - @if exist $(PROCESSOR) rd /s /q $(PROCESSOR) > NUL\r
- - @if exist ipf rd /s /q ipf > NUL\r
- - @if exist ebc rd /s /q ebc > NUL\r
- - @if exist fv rd /s /q fv > NUL\r
- - @if exist Tools rd /s /q Tools > NUL\r
- - @if exist makefile.out del makefile.out > NUL\r
- - @if exist module.* del module.* > NUL\r
- - @echo All targets cleaned\r
-\r
-#\r
-# Clean up all build directories except for tools.\r
-#\r
-cleanbuilds :\r
- - @if exist *.bak del *.bak > NUL\r
- - @if exist $(PROCESSOR) rd /s /q $(PROCESSOR) > NUL\r
- - @if exist ipf rd /s /q ipf > NUL\r
- - @if exist ebc rd /s /q ebc > NUL\r
- - @if exist fv rd /s /q fv > NUL\r
- - @if exist makefile.out del makefile.out > NUL\r
- - @if exist module.* del module.* > NUL\r
- - @echo All modules cleaned\r
-\r
-#\r
-# Clean up only the tools\r
-#\r
-cleantools :\r
- - @if exist vc??.* del vc??.* > NUL\r
- - @if exist Tools rd /s /q Tools > NUL\r
- - @echo All tools cleaned\r
-\r
-#\r
-# Rebuild target, clean and build all\r
-#\r
-rebuild : clean all\r
-\r
-#\r
-# cleanall target to clean all build directories.\r
-#\r
-cleanall : clean\r
+++ /dev/null
-#/*++\r
-#\r
-# Copyright (c) 2004 - 2007, Intel Corporation \r
-# All rights reserved. This program and the accompanying materials \r
-# are licensed and made available under the terms and conditions of the BSD License \r
-# which accompanies this distribution. The full text of the license may be found at \r
-# http://opensource.org/licenses/bsd-license.php \r
-# \r
-# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, \r
-# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. \r
-# \r
-# Module Name:\r
-#\r
-# Nt32.dsc\r
-#\r
-# Abstract:\r
-#\r
-# This is the build description file containing the platform \r
-# build definitions.\r
-#\r
-#\r
-# Notes:\r
-# \r
-# The info in this file is broken down into sections. The start of a section\r
-# is designated by a "[" in the first column. So the [=====] separater ends\r
-# a section.\r
-# \r
-#--*/\r
-\r
-\r
-[=============================================================================]\r
-#\r
-# This section gets processed first by the utility. Define any\r
-# macros that you may use elsewhere in this description file. This is the\r
-# mechanism by which you can pass parameters and defines to the makefiles\r
-# generated for each component. You can define it here, and then make an\r
-# assignment in the [makefile.common] section. For example, if here you\r
-# define MY_VAR = my_var_value, then you can add MY_VAR = $(MY_VAR) in\r
-# the [makefile.common] section and it becomes MY_VAR = my_var_value in\r
-# the output makefiles for each component.\r
-#\r
-[Defines]\r
-PLATFORM = $(PROJECT_NAME)\r
-\r
-[=============================================================================]\r
-#\r
-# Include other common build descriptions\r
-#\r
-!include "$(EDK_SOURCE)\Sample\Platform\Common.dsc"\r
-!include "$(EDK_SOURCE)\Sample\Platform\Common$(PROCESSOR).dsc"\r
-\r
-[=============================================================================]\r
-#\r
-# These control the generation of the FV files\r
-#\r
-[=============================================================================]\r
-[Fv.Fv.Attributes]\r
-\r
-[Fv.Fv.options]\r
-\r
-[Build.Fv.Fv]\r
-\r
-[=============================================================================]\r
-#\r
-# These are the libraries that will be built by the master makefile\r
-#\r
-[=============================================================================]\r
-[Libraries]\r
-DEFINE EDK_PREFIX=\r
-\r
-!include "$(EDK_SOURCE)\Sample\Platform\EdkLibAll.dsc"\r
-\r
-#\r
-# EdkII Glue Library\r
-#\r
-#!include "$(EDK_SOURCE)\Sample\Platform\EdkIIGlueLibAll.dsc"\r
-\r
-[=============================================================================]\r
-#\r
-# These are platform specific libraries that must be built prior to building\r
-# certain drivers that depend upon them.\r
-#\r
-[=============================================================================]\r
-[Libraries.Platform]\r
-Sample\Platform\Nt32\Protocol\EdkNt32ProtocolLib.inf\r
-Sample\Library\Dxe\WinNt\WinNtLib.inf\r
-#Sample\Platform\Generic\MonoStatusCode\Library\Pei\MemoryStatusCode\MemoryStatusCode.inf\r
-Sample\Platform\Generic\RuntimeDxe\StatusCode\Lib\BsDataHubStatusCode\BsDataHubStatusCode.inf\r
-Sample\Platform\Generic\RuntimeDxe\StatusCode\Lib\RtMemoryStatusCode\RtMemoryStatusCode.inf\r
-Sample\Platform\Generic\RuntimeDxe\StatusCode\Lib\RtPlatformStatusCode\$(PROJECT_NAME)\RtPlatformStatusCode.inf\r
-\r
-Other\Maintained\Application\Shell\Library\EfiShellLib.inf\r
-\r
-[=============================================================================]\r
-#\r
-# These are the components that will be built by the master makefile\r
-#\r
-[=============================================================================]\r
-[Components]\r
-DEFINE PACKAGE=Default\r
-\r
-#Other\Maintained\Application\Shell\Shell.inf\r
-#Other\Maintained\Application\Shell\ShellFull.inf\r
-Other\Maintained\Application\Shell\attrib\attrib.inf\r
-Other\Maintained\Application\Shell\cls\cls.inf\r
-Other\Maintained\Application\Shell\comp\comp.inf\r
-Other\Maintained\Application\Shell\cp\cp.inf\r
-Other\Maintained\Application\Shell\date\date.inf\r
-Other\Maintained\Application\Shell\dblk\dblk.inf\r
-Other\Maintained\Application\Shell\devices\devices.inf\r
-Other\Maintained\Application\Shell\DeviceTree\devicetree.inf\r
-Other\Maintained\Application\Shell\dmem\dmem.inf\r
-Other\Maintained\Application\Shell\dmpstore\dmpstore.inf\r
-Other\Maintained\Application\Shell\drivers\drivers.inf\r
-Other\Maintained\Application\Shell\drvcfg\drvcfg.inf\r
-Other\Maintained\Application\Shell\drvdiag\drvdiag.inf\r
-Other\Maintained\Application\Shell\edit\edit.inf\r
-Other\Maintained\Application\Shell\EfiCompress\compress.inf\r
-Other\Maintained\Application\Shell\EfiDecompress\Decompress.inf\r
-Other\Maintained\Application\Shell\err\err.inf\r
-Other\Maintained\Application\Shell\guid\guid.inf\r
-Other\Maintained\Application\Shell\hexedit\hexedit.inf\r
-Other\Maintained\Application\Shell\IfConfig\IfConfig.inf\r
-Other\Maintained\Application\Shell\IpConfig\IpConfig.inf\r
-Other\Maintained\Application\Shell\load\load.inf\r
-Other\Maintained\Application\Shell\LoadPciRom\LoadPciRom.inf\r
-Other\Maintained\Application\Shell\ls\ls.inf\r
-Other\Maintained\Application\Shell\mem\mem.inf\r
-Other\Maintained\Application\Shell\memmap\memmap.inf\r
-Other\Maintained\Application\Shell\mkdir\mkdir.inf\r
-Other\Maintained\Application\Shell\mm\mm.inf\r
-Other\Maintained\Application\Shell\mode\mode.inf\r
-Other\Maintained\Application\Shell\mount\mount.inf\r
-Other\Maintained\Application\Shell\mv\mv.inf\r
-Other\Maintained\Application\Shell\newshell\nshell.inf\r
-Other\Maintained\Application\Shell\openinfo\openinfo.inf\r
-Other\Maintained\Application\Shell\pci\pci.inf\r
-Other\Maintained\Application\Shell\Ping\Ping.inf\r
-Other\Maintained\Application\Shell\reset\reset.inf\r
-Other\Maintained\Application\Shell\rm\rm.inf\r
-Other\Maintained\Application\Shell\sermode\sermode.inf\r
-Other\Maintained\Application\Shell\SmbiosView\Smbiosview.inf\r
-Other\Maintained\Application\Shell\stall\stall.inf\r
-Other\Maintained\Application\Shell\TelnetMgmt\TelnetMgmt.inf\r
-Other\Maintained\Application\Shell\time\time.inf\r
-Other\Maintained\Application\Shell\touch\touch.inf\r
-Other\Maintained\Application\Shell\type\type.inf\r
-Other\Maintained\Application\Shell\tzone\timezone.inf\r
-Other\Maintained\Application\Shell\unload\unload.inf\r
-Other\Maintained\Application\Shell\ver\Ver.inf\r
-Other\Maintained\Application\Shell\vol\Vol.inf\r
-\r
-[=============================================================================]\r
-\r
+++ /dev/null
-#/*++\r
-# \r
-# Copyright (c) 2004 - 2007, Intel Corporation \r
-# All rights reserved. This program and the accompanying materials \r
-# are licensed and made available under the terms and conditions of the BSD License \r
-# which accompanies this distribution. The full text of the license may be found at \r
-# http://opensource.org/licenses/bsd-license.php \r
-# \r
-# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, \r
-# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. \r
-# \r
-# Module Name:\r
-#\r
-# PlatformTools.env\r
-# \r
-# Abstract:\r
-# \r
-# This file is used to define platform specific environment variables.\r
-# It gets included by every makefile.\r
-# \r
-#--*/\r
-\r
-!INCLUDE Config.env\r
-\r
-#\r
-# Set the project name\r
-#\r
-PROJECT_NAME = Nt32\r
-\r
-#\r
-# Set the build directory\r
-#\r
-BUILD_DIR = $(EDK_SOURCE)\Sample\Platform\$(PROJECT_NAME)\$(BUILD_TARGET_DIRECTORY)\r
-\r
-!IF "$(UEFI_MODE)" == "YES"\r
-GRAPHICS_INF = Sample\Bus\WinNtThunk\Gop\Dxe\WinNtGop.inf\r
-!ELSE\r
-GRAPHICS_INF = Sample\Bus\WinNtThunk\Uga\Dxe\WinNtUga.inf\r
-!ENDIF\r
-\r
-#\r
-# Define compiler names\r
-#\r
-!IFNDEF EDK_TOOLS_PATH\r
-EFI_ASL_LOCAL = YES\r
-!ELSE \r
-EFI_ASSEMBLER_NAME = Masm611\r
-EFI_ASL_LOCAL = NO\r
-!ENDIF\r
-\r
-#\r
-# These flags are specific to this platform. If a flag is not specific to this \r
-# platform the flag should be placed in the CommonTools.env file.\r
-# Processor architecture specific and global macros can be found in \r
-# CommonTools.env, macros named xxx_ARCH_FLAGS and xxx_STD_FLAGS respectively.\r
-#\r
-C_PROJ_FLAGS = /D UNICODE /D NEW_PEI_HOBS\r
-ASM_PROJ_FLAGS = /Cx /Zd /Fl$*.lst /DEFI_NT_EMULATOR\r
-LINK_PROJ_FLAGS =\r
-LIB_PROJ_FLAGS =\r
-EBC_C_PROJ_FLAGS =\r
-EBC_LINK_PROJ_FLAGS =\r
-EBC_LIB_PROJ_FLAGS =\r
-\r
-#\r
-# Include processor architecture specific and general Tiano build flags.\r
-#\r
-!INCLUDE $(EDK_SOURCE)\Sample\CommonTools.env\r
+++ /dev/null
-@rem #/*++\r
-@rem # \r
-@rem # Copyright (c) 2007, Intel Corporation \r
-@rem # All rights reserved. This program and the accompanying materials \r
-@rem # are licensed and made available under the terms and conditions of the BSD License \r
-@rem # which accompanies this distribution. The full text of the license may be found at \r
-@rem # http://opensource.org/licenses/bsd-license.php \r
-@rem # \r
-@rem # THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, \r
-@rem # WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. \r
-@rem # \r
-@rem # Module Name:\r
-@rem # \r
-@rem # build.bat\r
-@rem # \r
-@rem # Abstract:\r
-@rem # \r
-@rem # This script provides single module build, clean and find function\r
-@rem # based on module name.\r
-@rem # \r
-@rem # The auto-generated module.list file records all module names \r
-@rem # described in the current platform.dsc.\r
-@rem # \r
-@rem #--*/ \r
-\r
-@echo off\r
-\r
-setlocal\r
-@rem initilize local variable\r
-set FUNCTION=build\r
-set MODULE=\r
-set UPDATE=\r
-set VERBOSE=\r
-\r
-:parse\r
-if /I "%1"=="/c" (\r
- set FUNCTION=clean\r
- shift\r
- goto parse\r
-)\r
-if /I "%1"=="clean" (\r
- set FUNCTION=clean\r
- shift\r
- goto parse\r
-)\r
-if /I "%1"=="/r" (\r
- set FUNCTION=rebuild\r
- shift\r
- goto parse\r
-)\r
-if /I "%1"=="/h" (\r
- set FUNCTION=usage\r
- shift\r
- goto parse\r
-)\r
-if /I "%1"=="/?" (\r
- set FUNCTION=usage\r
- shift\r
- goto parse\r
-)\r
-if /I "%1"=="/f" (\r
- set FUNCTION=find\r
- shift\r
- goto parse\r
-)\r
-if /I "%1"=="/a" (\r
- set UPDATE=TRUE\r
- shift\r
- goto parse\r
-)\r
-if /I "%1"=="/v" (\r
- set VERBOSE=TRUE\r
- shift\r
- goto parse\r
-)\r
-if not "%1"=="" (\r
- set MODULE=%1\r
- shift\r
- goto parse\r
-) else (\r
- @rem no other paramters\r
- if "%FUNCTION%"=="rebuild" goto build\r
- goto %FUNCTION%\r
-)\r
-\r
-:build\r
-set StartTime=%time%\r
-@rem if no input, build all\r
-if "%MODULE%"=="" (\r
- if "%FUNCTION%"=="rebuild" (\r
- nmake -nologo -f Makefile clean\r
- )\r
- nmake -nologo -f Makefile all\r
- goto endtime\r
-)\r
-@rem then try to build special targets: all, fast, tools.\r
-if /I "%MODULE%"=="all" (\r
- @rem build all modules and tools.\r
- if "%FUNCTION%"=="rebuild" (\r
- nmake -nologo -f Makefile cleanall\r
- )\r
- nmake -nologo -f Makefile all\r
- goto endtime\r
-)\r
-if /I "%MODULE%"=="fast" (\r
- @rem build fast target to skip FV=NULL modules.\r
- if "%FUNCTION%"=="rebuild" (\r
- nmake -nologo -f Makefile clean\r
- )\r
- nmake -nologo -f Makefile fast\r
- goto endtime\r
-)\r
-if /I "%MODULE%"=="tools" (\r
- @rem build all tools.\r
- if "%FUNCTION%"=="rebuild" (\r
- nmake -nologo -f Makefile cleantools\r
- )\r
- nmake -nologo -f Makefile build_tools\r
- echo.\r
- echo All tools are built.\r
- goto endtime\r
-)\r
-@rem build single module, update build makefiles\r
-if "%FUNCTION%"=="rebuild" (\r
- nmake -nologo -f module.mak %MODULE%Clean 2>NUL\r
-)\r
-nmake -nologo -f Makefile flashmap > NUL 2>&1\r
-nmake -nologo -f Makefile makefiles\r
-if errorlevel 1 goto builderror\r
-@rem check whether input module name is described in current dsc file. \r
-findstr /I /C:" %MODULE% " module.list > NUL\r
-if errorlevel 1 (\r
- echo.\r
- echo.\r
- findstr /I /C:"%MODULE%" module.list > NUL\r
- if errorlevel 1 goto finderror\r
- for /F %%A in ('findstr /I /C:"%MODULE%" module.list') do echo %%A\r
- echo.\r
- echo Warning!!! Your specified module name can't be found. \r
- echo One of the above modules may be what you want to build.\r
- goto end\r
-)\r
-@rem build this module\r
-nmake -nologo -f module.mak %MODULE%Build \r
-echo.\r
-if "%FUNCTION%"=="rebuild" (\r
- echo Module %MODULE% is rebuilt.\r
-) else (\r
- echo Module %MODULE% is built.\r
-)\r
-:endtime\r
-@rem output build time.\r
-set EndTime=%time%\r
-echo.\r
-echo Start time %StartTime%\r
-echo End time %EndTime%\r
-goto end\r
-\r
-:clean\r
-@rem if no input, default clean all build directories.\r
-if "%MODULE%"=="" (\r
- nmake -nologo -f Makefile clean\r
- goto end\r
-)\r
-@rem first try to clean special tasks: all, modules and tools\r
-if /I "%MODULE%"=="all" (\r
- nmake -nologo -f Makefile cleanall\r
- goto end\r
-)\r
-if /I "%MODULE%"=="modules" (\r
- nmake -nologo -f Makefile cleanbuilds\r
- goto end\r
-)\r
-if /I "%MODULE%"=="tools" (\r
- nmake -nologo -f Makefile cleantools\r
- goto end\r
-)\r
-@rem clean single module \r
-@rem check whether input module name is in module.list file. \r
-if not exist module.list (\r
- echo Module list info doesn't exist.\r
- echo Processing dsc file to generate module list info.\r
- nmake -nologo -f Makefile flashmap > NUL 2>&1\r
- nmake -nologo -f Makefile makefiles > error.log 2>&1\r
- if errorlevel 1 goto builderror\r
-)\r
-findstr /I /C:" %MODULE% " module.list > NUL\r
-if errorlevel 1 (\r
- echo.\r
- findstr /I /C:"%MODULE%" module.list > NUL\r
- if errorlevel 1 goto finderror\r
- for /F %%A in ('findstr /I /C:"%MODULE%" module.list') do echo %%A\r
- echo.\r
- echo Warning!!! Your specified module name can't be found. \r
- echo One of the above modules may be what you want to clean. \r
- goto end\r
-)\r
-@rem clean this module \r
-nmake -nologo -f module.mak %MODULE%Clean 2>NUL\r
-echo.\r
-echo Module %MODULE% is cleaned.\r
-goto end\r
-\r
-:find\r
-@rem find match module name by subname.\r
-if "%UPDATE%"=="TRUE" (\r
- echo Processing dsc file to update module list info.\r
- nmake -nologo -f Makefile flashmap > NUL 2>&1\r
- nmake -nologo -f Makefile makefiles > error.log 2>&1\r
- if errorlevel 1 goto builderror\r
-)\r
-if not exist module.list (\r
- echo Module list info doesn't exist.\r
- echo Processing dsc file to generate module list info.\r
- nmake -nologo -f Makefile flashmap > NUL 2>&1\r
- nmake -nologo -f Makefile makefiles > error.log 2>&1\r
- if errorlevel 1 goto builderror\r
-)\r
-if "%MODULE%"=="" (\r
- @rem display all\r
- echo.\r
- if "%VERBOSE%"=="TRUE" ( \r
- type module.list\r
- ) else (\r
- @rem only output module name without module.inf file name\r
- for /F %%A in (module.list) do echo %%A\r
- )\r
-) else (\r
- @rem display match module name\r
- echo.\r
- if "%VERBOSE%"=="TRUE" (\r
- findstr /I /C:"%MODULE%" module.list\r
- if errorlevel 1 goto notfind\r
- ) else (\r
- findstr /I /C:"%MODULE%" module.list > NUL\r
- if errorlevel 1 goto notfind\r
- for /F %%A in ('findstr /I /C:"%MODULE%" module.list') do echo %%A\r
- )\r
-)\r
-goto end\r
-\r
-:usage\r
-echo build or clean single module based on module name after tools are built.\r
-echo.\r
-echo build [/r] [/c] [/f] [/h] [modulename]\r
-echo.\r
-echo build [/r] [modulename]\r
-echo build single module, such as build DxeMain.\r
-echo If /r is specified, the target will be rebuit after cleaned first.\r
-echo if no input modulename or modulename is all, then build all\r
-echo Specail build targets: all, fast, tools.\r
-echo These special targets may not exist in your tip main makefile.\r
-echo build - build all tools and modules\r
-echo build all - build all tools and modules\r
-echo build fast - build all without FV=NULL modules\r
-echo build tools - build all tools.\r
-echo.\r
-echo build /c [modulename]\r
-echo build clean [modulename]\r
-echo remove the temp generated files for single module \r
-echo if no input modulename, then clean all\r
-echo Specail clean targets: all, modules, tools.\r
-echo These special targets may not exist in your tip main makefile.\r
-echo build /c - clean up all build directories\r
-echo build /c all - clean up all build directories and binary dirs.\r
-echo build /c modules - clean up all build directories except for tools.\r
-echo build /c tools - clean up only tools directory.\r
-echo.\r
-echo build /f [/a] [/v] [subname]\r
-echo find all matched modulename with the sub string of module name.\r
-echo option /a re-processes dsc files to update module name list.\r
-echo option /v outputs module name and module.inf file name both.\r
-echo.\r
-echo build /h\r
-echo build /?\r
-echo display help information. \r
-echo.\r
-goto end\r
-\r
-:notfind\r
-echo Warning!!! Your specified module name can't be found.\r
-echo Try to use /f /a options to update module name list.\r
-goto end\r
-\r
-:finderror\r
-echo Warning!!! Your specified module name can't be found.\r
-echo Try to use /f to find modules that you want to build.\r
-echo Or use /h to get the helpinfo of this script.\r
-goto end\r
-\r
-:builderror\r
-if exist error.log type error.log\r
-echo.\r
-if not exist Tools\ProcessDsc.exe (\r
- echo.\r
- echo Error!!! Build tools may not be ready. Try to build tools first.\r
- echo.\r
-)\r
-del module.* > NUL 2>&1\r
-goto end\r
-\r
-:end\r
-if exist error.log del error.log\r
-echo on\r
Sample\Platform\Generic\RuntimeDxe\StatusCode\Lib\BsDataHubStatusCode\BsDataHubStatusCode.inf\r
Sample\Platform\Generic\RuntimeDxe\StatusCode\Lib\RtMemoryStatusCode\RtMemoryStatusCode.inf\r
\r
-#Other\Maintained\Application\Shell\Library\EfiShellLib.inf\r
-\r
[=============================================================================]\r
#\r
# These are the components that will be built by the master makefile\r
[Components]\r
DEFINE PACKAGE=Default\r
\r
-#Other\Maintained\Application\Shell\Shell.inf\r
+#Add EDK INF file here:\r
#Other\Maintained\Application\Shell\ShellFull.inf\r
\r
\r
projects / mirror_edk2.git / commitdiff