+/** @file
+ Serial I/O Port library functions with no library constructor/destructor
+
+
+ Copyright (c) 2008 - 2010, Apple Inc. All rights reserved.<BR>
+
+ This program and the accompanying materials
+ are licensed and made available under the terms and conditions of the BSD License
+ which accompanies this distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+#include <Include/Uefi.h>
+
+#include <Library/IoLib.h>
+
+#include <Drivers/PL011Uart.h>
+
+/*
+
+ Programmed hardware of Serial port.
+
+ @return Always return EFI_UNSUPPORTED.
+
+**/
+RETURN_STATUS
+EFIAPI
+PL011UartInitialize (
+ IN UINTN UartBase,
+ IN UINTN BaudRate,
+ IN UINTN LineControl
+ )
+{
+ if (BaudRate == 115200) {
+ // Initialize baud rate generator
+ MmioWrite32 (UartBase + UARTIBRD, UART_115200_IDIV);
+ MmioWrite32 (UartBase + UARTFBRD, UART_115200_FDIV);
+ } else if (BaudRate == 38400) {
+ // Initialize baud rate generator
+ MmioWrite32 (UartBase + UARTIBRD, UART_38400_IDIV);
+ MmioWrite32 (UartBase + UARTFBRD, UART_38400_FDIV);
+ } else if (BaudRate == 19200) {
+ // Initialize baud rate generator
+ MmioWrite32 (UartBase + UARTIBRD, UART_19200_IDIV);
+ MmioWrite32 (UartBase + UARTFBRD, UART_19200_FDIV);
+ } else {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ // No parity, 1 stop, no fifo, 8 data bits
+ MmioWrite32 (UartBase + UARTLCR_H, LineControl);
+
+ // Clear any pending errors
+ MmioWrite32 (UartBase + UARTECR, 0);
+
+ // Enable tx, rx, and uart overall
+ MmioWrite32 (UartBase + UARTCR, PL011_UARTCR_RXE | PL011_UARTCR_TXE | PL011_UARTCR_UARTEN);
+
+ return EFI_SUCCESS;
+}
+
+/**
+ Write data to serial device.
+
+ @param Buffer Point of data buffer which need to be written.
+ @param NumberOfBytes Number of output bytes which are cached in Buffer.
+
+ @retval 0 Write data failed.
+ @retval !0 Actual number of bytes written to serial device.
+
+**/
+UINTN
+EFIAPI
+PL011UartWrite (
+ IN UINTN UartBase,
+ IN UINT8 *Buffer,
+ IN UINTN NumberOfBytes
+ )
+{
+ UINTN Count;
+
+ for (Count = 0; Count < NumberOfBytes; Count++, Buffer++) {
+ while ((MmioRead32 (UartBase + UARTFR) & UART_TX_EMPTY_FLAG_MASK) == 0);
+ MmioWrite8 (UartBase + UARTDR, *Buffer);
+ }
+
+ return NumberOfBytes;
+}
+
+/**
+ Read data from serial device and save the data in buffer.
+
+ @param Buffer Point of data buffer which need to be written.
+ @param NumberOfBytes Number of output bytes which are cached in Buffer.
+
+ @retval 0 Read data failed.
+ @retval !0 Actual number of bytes read from serial device.
+
+**/
+UINTN
+EFIAPI
+PL011UartRead (
+ IN UINTN UartBase,
+ OUT UINT8 *Buffer,
+ IN UINTN NumberOfBytes
+ )
+{
+ UINTN Count;
+
+ for (Count = 0; Count < NumberOfBytes; Count++, Buffer++) {
+ while ((MmioRead32 (UartBase + UARTFR) & UART_RX_EMPTY_FLAG_MASK) != 0);
+ *Buffer = MmioRead8 (UartBase + UARTDR);
+ }
+
+ return NumberOfBytes;
+}
+
+/**
+ Check to see if any data is available to be read from the debug device.
+
+ @retval EFI_SUCCESS At least one byte of data is available to be read
+ @retval EFI_NOT_READY No data is available to be read
+ @retval EFI_DEVICE_ERROR The serial device is not functioning properly
+
+**/
+BOOLEAN
+EFIAPI
+PL011UartPoll (
+ IN UINTN UartBase
+ )
+{
+ return ((MmioRead32 (UartBase + UARTFR) & UART_RX_EMPTY_FLAG_MASK) == 0);
+}
projects / mirror_edk2.git / commitdiff