+/** @file\r
+ Functions in this library instance make use of MMIO functions in IoLib to\r
+ access memory mapped PCI configuration space.\r
+\r
+ All assertions for I/O operations are handled in MMIO functions in the IoLib\r
+ Library.\r
+\r
+ Copyright (c) 2006 - 2012, Intel Corporation. All rights reserved.<BR>\r
+ This program and the accompanying materials\r
+ are licensed and made available under the terms and conditions of the BSD License\r
+ which accompanies this distribution. The full text of the license may be found at\r
+ http://opensource.org/licenses/bsd-license.php.\r
+\r
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,\r
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.\r
+\r
+**/\r
+\r
+\r
+#include <Base.h>\r
+\r
+#include <Library/BaseLib.h>\r
+#include <Library/PciExpressLib.h>\r
+#include <Library/IoLib.h>\r
+#include <Library/DebugLib.h>\r
+#include <Library/PcdLib.h>\r
+\r
+\r
+/**\r
+ Assert the validity of a PCI address. A valid PCI address should contain 1's\r
+ only in the low 28 bits.\r
+\r
+ @param A The address to validate.\r
+\r
+**/\r
+#define ASSERT_INVALID_PCI_ADDRESS(A) \\r
+ ASSERT (((A) & ~0xfffffff) == 0)\r
+\r
+/**\r
+ Registers a PCI device so PCI configuration registers may be accessed after \r
+ SetVirtualAddressMap().\r
+ \r
+ Registers the PCI device specified by Address so all the PCI configuration \r
+ registers associated with that PCI device may be accessed after SetVirtualAddressMap() \r
+ is called.\r
+ \r
+ If Address > 0x0FFFFFFF, then ASSERT().\r
+\r
+ @param Address The address that encodes the PCI Bus, Device, Function and\r
+ Register.\r
+ \r
+ @retval RETURN_SUCCESS The PCI device was registered for runtime access.\r
+ @retval RETURN_UNSUPPORTED An attempt was made to call this function \r
+ after ExitBootServices().\r
+ @retval RETURN_UNSUPPORTED The resources required to access the PCI device\r
+ at runtime could not be mapped.\r
+ @retval RETURN_OUT_OF_RESOURCES There are not enough resources available to\r
+ complete the registration.\r
+\r
+**/\r
+RETURN_STATUS\r
+EFIAPI\r
+PciExpressRegisterForRuntimeAccess (\r
+ IN UINTN Address\r
+ )\r
+{\r
+ ASSERT_INVALID_PCI_ADDRESS (Address);\r
+ return RETURN_UNSUPPORTED;\r
+}\r
+\r
+STATIC UINT64 mPciExpressBaseAddress;\r
+\r
+RETURN_STATUS\r
+EFIAPI\r
+PciExpressLibInitialize (\r
+ VOID\r
+ )\r
+{\r
+ mPciExpressBaseAddress = PcdGet64 (PcdPciExpressBaseAddress);\r
+ return RETURN_SUCCESS;\r
+}\r
+\r
+\r
+/**\r
+ Gets the base address of PCI Express.\r
+ \r
+ @return The base address of PCI Express.\r
+\r
+**/\r
+VOID*\r
+GetPciExpressBaseAddress (\r
+ VOID\r
+ )\r
+{\r
+ return (VOID*)(UINTN) mPciExpressBaseAddress;\r
+}\r
+\r
+/**\r
+ Reads an 8-bit PCI configuration register.\r
+\r
+ Reads and returns the 8-bit PCI configuration register specified by Address.\r
+ This function must guarantee that all PCI read and write operations are\r
+ serialized.\r
+\r
+ If Address > 0x0FFFFFFF, then ASSERT().\r
+\r
+ @param Address The address that encodes the PCI Bus, Device, Function and\r
+ Register.\r
+\r
+ @return The read value from the PCI configuration register.\r
+\r
+**/\r
+UINT8\r
+EFIAPI\r
+PciExpressRead8 (\r
+ IN UINTN Address\r
+ )\r
+{\r
+ ASSERT_INVALID_PCI_ADDRESS (Address);\r
+ return MmioRead8 ((UINTN) GetPciExpressBaseAddress () + Address);\r
+}\r
+\r
+/**\r
+ Writes an 8-bit PCI configuration register.\r
+\r
+ Writes the 8-bit PCI configuration register specified by Address with the\r
+ value specified by Value. Value is returned. This function must guarantee\r
+ that all PCI read and write operations are serialized.\r
+\r
+ If Address > 0x0FFFFFFF, then ASSERT().\r
+\r
+ @param Address The address that encodes the PCI Bus, Device, Function and\r
+ Register.\r
+ @param Value The value to write.\r
+\r
+ @return The value written to the PCI configuration register.\r
+\r
+**/\r
+UINT8\r
+EFIAPI\r
+PciExpressWrite8 (\r
+ IN UINTN Address,\r
+ IN UINT8 Value\r
+ )\r
+{\r
+ ASSERT_INVALID_PCI_ADDRESS (Address);\r
+ return MmioWrite8 ((UINTN) GetPciExpressBaseAddress () + Address, Value);\r
+}\r
+\r
+/**\r
+ Performs a bitwise OR of an 8-bit PCI configuration register with\r
+ an 8-bit value.\r
+\r
+ Reads the 8-bit PCI configuration register specified by Address, performs a\r
+ bitwise OR between the read result and the value specified by\r
+ OrData, and writes the result to the 8-bit PCI configuration register\r
+ specified by Address. The value written to the PCI configuration register is\r
+ returned. This function must guarantee that all PCI read and write operations\r
+ are serialized.\r
+\r
+ If Address > 0x0FFFFFFF, then ASSERT().\r
+\r
+ @param Address The address that encodes the PCI Bus, Device, Function and\r
+ Register.\r
+ @param OrData The value to OR with the PCI configuration register.\r
+\r
+ @return The value written back to the PCI configuration register.\r
+\r
+**/\r
+UINT8\r
+EFIAPI\r
+PciExpressOr8 (\r
+ IN UINTN Address,\r
+ IN UINT8 OrData\r
+ )\r
+{\r
+ ASSERT_INVALID_PCI_ADDRESS (Address);\r
+ return MmioOr8 ((UINTN) GetPciExpressBaseAddress () + Address, OrData);\r
+}\r
+\r
+/**\r
+ Performs a bitwise AND of an 8-bit PCI configuration register with an 8-bit\r
+ value.\r
+\r
+ Reads the 8-bit PCI configuration register specified by Address, performs a\r
+ bitwise AND between the read result and the value specified by AndData, and\r
+ writes the result to the 8-bit PCI configuration register specified by\r
+ Address. The value written to the PCI configuration register is returned.\r
+ This function must guarantee that all PCI read and write operations are\r
+ serialized.\r
+\r
+ If Address > 0x0FFFFFFF, then ASSERT().\r
+\r
+ @param Address The address that encodes the PCI Bus, Device, Function and\r
+ Register.\r
+ @param AndData The value to AND with the PCI configuration register.\r
+\r
+ @return The value written back to the PCI configuration register.\r
+\r
+**/\r
+UINT8\r
+EFIAPI\r
+PciExpressAnd8 (\r
+ IN UINTN Address,\r
+ IN UINT8 AndData\r
+ )\r
+{\r
+ ASSERT_INVALID_PCI_ADDRESS (Address);\r
+ return MmioAnd8 ((UINTN) GetPciExpressBaseAddress () + Address, AndData);\r
+}\r
+\r
+/**\r
+ Performs a bitwise AND of an 8-bit PCI configuration register with an 8-bit\r
+ value, followed a bitwise OR with another 8-bit value.\r
+\r
+ Reads the 8-bit PCI configuration register specified by Address, performs a\r
+ bitwise AND between the read result and the value specified by AndData,\r
+ performs a bitwise OR between the result of the AND operation and\r
+ the value specified by OrData, and writes the result to the 8-bit PCI\r
+ configuration register specified by Address. The value written to the PCI\r
+ configuration register is returned. This function must guarantee that all PCI\r
+ read and write operations are serialized.\r
+\r
+ If Address > 0x0FFFFFFF, then ASSERT().\r
+\r
+ @param Address The address that encodes the PCI Bus, Device, Function and\r
+ Register.\r
+ @param AndData The value to AND with the PCI configuration register.\r
+ @param OrData The value to OR with the result of the AND operation.\r
+\r
+ @return The value written back to the PCI configuration register.\r
+\r
+**/\r
+UINT8\r
+EFIAPI\r
+PciExpressAndThenOr8 (\r
+ IN UINTN Address,\r
+ IN UINT8 AndData,\r
+ IN UINT8 OrData\r
+ )\r
+{\r
+ ASSERT_INVALID_PCI_ADDRESS (Address);\r
+ return MmioAndThenOr8 (\r
+ (UINTN) GetPciExpressBaseAddress () + Address,\r
+ AndData,\r
+ OrData\r
+ );\r
+}\r
+\r
+/**\r
+ Reads a bit field of a PCI configuration register.\r
+\r
+ Reads the bit field in an 8-bit PCI configuration register. The bit field is\r
+ specified by the StartBit and the EndBit. The value of the bit field is\r
+ returned.\r
+\r
+ If Address > 0x0FFFFFFF, then ASSERT().\r
+ If StartBit is greater than 7, then ASSERT().\r
+ If EndBit is greater than 7, then ASSERT().\r
+ If EndBit is less than StartBit, then ASSERT().\r
+\r
+ @param Address The PCI configuration register to read.\r
+ @param StartBit The ordinal of the least significant bit in the bit field.\r
+ Range 0..7.\r
+ @param EndBit The ordinal of the most significant bit in the bit field.\r
+ Range 0..7.\r
+\r
+ @return The value of the bit field read from the PCI configuration register.\r
+\r
+**/\r
+UINT8\r
+EFIAPI\r
+PciExpressBitFieldRead8 (\r
+ IN UINTN Address,\r
+ IN UINTN StartBit,\r
+ IN UINTN EndBit\r
+ )\r
+{\r
+ ASSERT_INVALID_PCI_ADDRESS (Address);\r
+ return MmioBitFieldRead8 (\r
+ (UINTN) GetPciExpressBaseAddress () + Address,\r
+ StartBit,\r
+ EndBit\r
+ );\r
+}\r
+\r
+/**\r
+ Writes a bit field to a PCI configuration register.\r
+\r
+ Writes Value to the bit field of the PCI configuration register. The bit\r
+ field is specified by the StartBit and the EndBit. All other bits in the\r
+ destination PCI configuration register are preserved. The new value of the\r
+ 8-bit register is returned.\r
+\r
+ If Address > 0x0FFFFFFF, then ASSERT().\r
+ If StartBit is greater than 7, then ASSERT().\r
+ If EndBit is greater than 7, then ASSERT().\r
+ If EndBit is less than StartBit, then ASSERT().\r
+ If Value is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT().\r
+\r
+ @param Address The PCI configuration register to write.\r
+ @param StartBit The ordinal of the least significant bit in the bit field.\r
+ Range 0..7.\r
+ @param EndBit The ordinal of the most significant bit in the bit field.\r
+ Range 0..7.\r
+ @param Value The new value of the bit field.\r
+\r
+ @return The value written back to the PCI configuration register.\r
+\r
+**/\r
+UINT8\r
+EFIAPI\r
+PciExpressBitFieldWrite8 (\r
+ IN UINTN Address,\r
+ IN UINTN StartBit,\r
+ IN UINTN EndBit,\r
+ IN UINT8 Value\r
+ )\r
+{\r
+ ASSERT_INVALID_PCI_ADDRESS (Address);\r
+ return MmioBitFieldWrite8 (\r
+ (UINTN) GetPciExpressBaseAddress () + Address,\r
+ StartBit,\r
+ EndBit,\r
+ Value\r
+ );\r
+}\r
+\r
+/**\r
+ Reads a bit field in an 8-bit PCI configuration, performs a bitwise OR, and\r
+ writes the result back to the bit field in the 8-bit port.\r
+\r
+ Reads the 8-bit PCI configuration register specified by Address, performs a\r
+ bitwise OR between the read result and the value specified by\r
+ OrData, and writes the result to the 8-bit PCI configuration register\r
+ specified by Address. The value written to the PCI configuration register is\r
+ returned. This function must guarantee that all PCI read and write operations\r
+ are serialized. Extra left bits in OrData are stripped.\r
+\r
+ If Address > 0x0FFFFFFF, then ASSERT().\r
+ If StartBit is greater than 7, then ASSERT().\r
+ If EndBit is greater than 7, then ASSERT().\r
+ If EndBit is less than StartBit, then ASSERT().\r
+ If OrData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT().\r
+\r
+ @param Address The PCI configuration register to write.\r
+ @param StartBit The ordinal of the least significant bit in the bit field.\r
+ Range 0..7.\r
+ @param EndBit The ordinal of the most significant bit in the bit field.\r
+ Range 0..7.\r
+ @param OrData The value to OR with the PCI configuration register.\r
+\r
+ @return The value written back to the PCI configuration register.\r
+\r
+**/\r
+UINT8\r
+EFIAPI\r
+PciExpressBitFieldOr8 (\r
+ IN UINTN Address,\r
+ IN UINTN StartBit,\r
+ IN UINTN EndBit,\r
+ IN UINT8 OrData\r
+ )\r
+{\r
+ ASSERT_INVALID_PCI_ADDRESS (Address);\r
+ return MmioBitFieldOr8 (\r
+ (UINTN) GetPciExpressBaseAddress () + Address,\r
+ StartBit,\r
+ EndBit,\r
+ OrData\r
+ );\r
+}\r
+\r
+/**\r
+ Reads a bit field in an 8-bit PCI configuration register, performs a bitwise\r
+ AND, and writes the result back to the bit field in the 8-bit register.\r
+\r
+ Reads the 8-bit PCI configuration register specified by Address, performs a\r
+ bitwise AND between the read result and the value specified by AndData, and\r
+ writes the result to the 8-bit PCI configuration register specified by\r
+ Address. The value written to the PCI configuration register is returned.\r
+ This function must guarantee that all PCI read and write operations are\r
+ serialized. Extra left bits in AndData are stripped.\r
+\r
+ If Address > 0x0FFFFFFF, then ASSERT().\r
+ If StartBit is greater than 7, then ASSERT().\r
+ If EndBit is greater than 7, then ASSERT().\r
+ If EndBit is less than StartBit, then ASSERT().\r
+ If AndData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT().\r
+\r
+ @param Address The PCI configuration register to write.\r
+ @param StartBit The ordinal of the least significant bit in the bit field.\r
+ Range 0..7.\r
+ @param EndBit The ordinal of the most significant bit in the bit field.\r
+ Range 0..7.\r
+ @param AndData The value to AND with the PCI configuration register.\r
+\r
+ @return The value written back to the PCI configuration register.\r
+\r
+**/\r
+UINT8\r
+EFIAPI\r
+PciExpressBitFieldAnd8 (\r
+ IN UINTN Address,\r
+ IN UINTN StartBit,\r
+ IN UINTN EndBit,\r
+ IN UINT8 AndData\r
+ )\r
+{\r
+ ASSERT_INVALID_PCI_ADDRESS (Address);\r
+ return MmioBitFieldAnd8 (\r
+ (UINTN) GetPciExpressBaseAddress () + Address,\r
+ StartBit,\r
+ EndBit,\r
+ AndData\r
+ );\r
+}\r
+\r
+/**\r
+ Reads a bit field in an 8-bit port, performs a bitwise AND followed by a\r
+ bitwise OR, and writes the result back to the bit field in the\r
+ 8-bit port.\r
+\r
+ Reads the 8-bit PCI configuration register specified by Address, performs a\r
+ bitwise AND followed by a bitwise OR between the read result and\r
+ the value specified by AndData, and writes the result to the 8-bit PCI\r
+ configuration register specified by Address. The value written to the PCI\r
+ configuration register is returned. This function must guarantee that all PCI\r
+ read and write operations are serialized. Extra left bits in both AndData and\r
+ OrData are stripped.\r
+\r
+ If Address > 0x0FFFFFFF, then ASSERT().\r
+ If StartBit is greater than 7, then ASSERT().\r
+ If EndBit is greater than 7, then ASSERT().\r
+ If EndBit is less than StartBit, then ASSERT().\r
+ If AndData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT().\r
+ If OrData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT().\r
+\r
+ @param Address The PCI configuration register to write.\r
+ @param StartBit The ordinal of the least significant bit in the bit field.\r
+ Range 0..7.\r
+ @param EndBit The ordinal of the most significant bit in the bit field.\r
+ Range 0..7.\r
+ @param AndData The value to AND with the PCI configuration register.\r
+ @param OrData The value to OR with the result of the AND operation.\r
+\r
+ @return The value written back to the PCI configuration register.\r
+\r
+**/\r
+UINT8\r
+EFIAPI\r
+PciExpressBitFieldAndThenOr8 (\r
+ IN UINTN Address,\r
+ IN UINTN StartBit,\r
+ IN UINTN EndBit,\r
+ IN UINT8 AndData,\r
+ IN UINT8 OrData\r
+ )\r
+{\r
+ ASSERT_INVALID_PCI_ADDRESS (Address);\r
+ return MmioBitFieldAndThenOr8 (\r
+ (UINTN) GetPciExpressBaseAddress () + Address,\r
+ StartBit,\r
+ EndBit,\r
+ AndData,\r
+ OrData\r
+ );\r
+}\r
+\r
+/**\r
+ Reads a 16-bit PCI configuration register.\r
+\r
+ Reads and returns the 16-bit PCI configuration register specified by Address.\r
+ This function must guarantee that all PCI read and write operations are\r
+ serialized.\r
+\r
+ If Address > 0x0FFFFFFF, then ASSERT().\r
+ If Address is not aligned on a 16-bit boundary, then ASSERT().\r
+\r
+ @param Address The address that encodes the PCI Bus, Device, Function and\r
+ Register.\r
+\r
+ @return The read value from the PCI configuration register.\r
+\r
+**/\r
+UINT16\r
+EFIAPI\r
+PciExpressRead16 (\r
+ IN UINTN Address\r
+ )\r
+{\r
+ ASSERT_INVALID_PCI_ADDRESS (Address);\r
+ return MmioRead16 ((UINTN) GetPciExpressBaseAddress () + Address);\r
+}\r
+\r
+/**\r
+ Writes a 16-bit PCI configuration register.\r
+\r
+ Writes the 16-bit PCI configuration register specified by Address with the\r
+ value specified by Value. Value is returned. This function must guarantee\r
+ that all PCI read and write operations are serialized.\r
+\r
+ If Address > 0x0FFFFFFF, then ASSERT().\r
+ If Address is not aligned on a 16-bit boundary, then ASSERT().\r
+\r
+ @param Address The address that encodes the PCI Bus, Device, Function and\r
+ Register.\r
+ @param Value The value to write.\r
+\r
+ @return The value written to the PCI configuration register.\r
+\r
+**/\r
+UINT16\r
+EFIAPI\r
+PciExpressWrite16 (\r
+ IN UINTN Address,\r
+ IN UINT16 Value\r
+ )\r
+{\r
+ ASSERT_INVALID_PCI_ADDRESS (Address);\r
+ return MmioWrite16 ((UINTN) GetPciExpressBaseAddress () + Address, Value);\r
+}\r
+\r
+/**\r
+ Performs a bitwise OR of a 16-bit PCI configuration register with\r
+ a 16-bit value.\r
+\r
+ Reads the 16-bit PCI configuration register specified by Address, performs a\r
+ bitwise OR between the read result and the value specified by\r
+ OrData, and writes the result to the 16-bit PCI configuration register\r
+ specified by Address. The value written to the PCI configuration register is\r
+ returned. This function must guarantee that all PCI read and write operations\r
+ are serialized.\r
+\r
+ If Address > 0x0FFFFFFF, then ASSERT().\r
+ If Address is not aligned on a 16-bit boundary, then ASSERT().\r
+\r
+ @param Address The address that encodes the PCI Bus, Device, Function and\r
+ Register.\r
+ @param OrData The value to OR with the PCI configuration register.\r
+\r
+ @return The value written back to the PCI configuration register.\r
+\r
+**/\r
+UINT16\r
+EFIAPI\r
+PciExpressOr16 (\r
+ IN UINTN Address,\r
+ IN UINT16 OrData\r
+ )\r
+{\r
+ ASSERT_INVALID_PCI_ADDRESS (Address);\r
+ return MmioOr16 ((UINTN) GetPciExpressBaseAddress () + Address, OrData);\r
+}\r
+\r
+/**\r
+ Performs a bitwise AND of a 16-bit PCI configuration register with a 16-bit\r
+ value.\r
+\r
+ Reads the 16-bit PCI configuration register specified by Address, performs a\r
+ bitwise AND between the read result and the value specified by AndData, and\r
+ writes the result to the 16-bit PCI configuration register specified by\r
+ Address. The value written to the PCI configuration register is returned.\r
+ This function must guarantee that all PCI read and write operations are\r
+ serialized.\r
+\r
+ If Address > 0x0FFFFFFF, then ASSERT().\r
+ If Address is not aligned on a 16-bit boundary, then ASSERT().\r
+\r
+ @param Address The address that encodes the PCI Bus, Device, Function and\r
+ Register.\r
+ @param AndData The value to AND with the PCI configuration register.\r
+\r
+ @return The value written back to the PCI configuration register.\r
+\r
+**/\r
+UINT16\r
+EFIAPI\r
+PciExpressAnd16 (\r
+ IN UINTN Address,\r
+ IN UINT16 AndData\r
+ )\r
+{\r
+ ASSERT_INVALID_PCI_ADDRESS (Address);\r
+ return MmioAnd16 ((UINTN) GetPciExpressBaseAddress () + Address, AndData);\r
+}\r
+\r
+/**\r
+ Performs a bitwise AND of a 16-bit PCI configuration register with a 16-bit\r
+ value, followed a bitwise OR with another 16-bit value.\r
+\r
+ Reads the 16-bit PCI configuration register specified by Address, performs a\r
+ bitwise AND between the read result and the value specified by AndData,\r
+ performs a bitwise OR between the result of the AND operation and\r
+ the value specified by OrData, and writes the result to the 16-bit PCI\r
+ configuration register specified by Address. The value written to the PCI\r
+ configuration register is returned. This function must guarantee that all PCI\r
+ read and write operations are serialized.\r
+\r
+ If Address > 0x0FFFFFFF, then ASSERT().\r
+ If Address is not aligned on a 16-bit boundary, then ASSERT().\r
+\r
+ @param Address The address that encodes the PCI Bus, Device, Function and\r
+ Register.\r
+ @param AndData The value to AND with the PCI configuration register.\r
+ @param OrData The value to OR with the result of the AND operation.\r
+\r
+ @return The value written back to the PCI configuration register.\r
+\r
+**/\r
+UINT16\r
+EFIAPI\r
+PciExpressAndThenOr16 (\r
+ IN UINTN Address,\r
+ IN UINT16 AndData,\r
+ IN UINT16 OrData\r
+ )\r
+{\r
+ ASSERT_INVALID_PCI_ADDRESS (Address);\r
+ return MmioAndThenOr16 (\r
+ (UINTN) GetPciExpressBaseAddress () + Address,\r
+ AndData,\r
+ OrData\r
+ );\r
+}\r
+\r
+/**\r
+ Reads a bit field of a PCI configuration register.\r
+\r
+ Reads the bit field in a 16-bit PCI configuration register. The bit field is\r
+ specified by the StartBit and the EndBit. The value of the bit field is\r
+ returned.\r
+\r
+ If Address > 0x0FFFFFFF, then ASSERT().\r
+ If Address is not aligned on a 16-bit boundary, then ASSERT().\r
+ If StartBit is greater than 15, then ASSERT().\r
+ If EndBit is greater than 15, then ASSERT().\r
+ If EndBit is less than StartBit, then ASSERT().\r
+\r
+ @param Address The PCI configuration register to read.\r
+ @param StartBit The ordinal of the least significant bit in the bit field.\r
+ Range 0..15.\r
+ @param EndBit The ordinal of the most significant bit in the bit field.\r
+ Range 0..15.\r
+\r
+ @return The value of the bit field read from the PCI configuration register.\r
+\r
+**/\r
+UINT16\r
+EFIAPI\r
+PciExpressBitFieldRead16 (\r
+ IN UINTN Address,\r
+ IN UINTN StartBit,\r
+ IN UINTN EndBit\r
+ )\r
+{\r
+ ASSERT_INVALID_PCI_ADDRESS (Address);\r
+ return MmioBitFieldRead16 (\r
+ (UINTN) GetPciExpressBaseAddress () + Address,\r
+ StartBit,\r
+ EndBit\r
+ );\r
+}\r
+\r
+/**\r
+ Writes a bit field to a PCI configuration register.\r
+\r
+ Writes Value to the bit field of the PCI configuration register. The bit\r
+ field is specified by the StartBit and the EndBit. All other bits in the\r
+ destination PCI configuration register are preserved. The new value of the\r
+ 16-bit register is returned.\r
+\r
+ If Address > 0x0FFFFFFF, then ASSERT().\r
+ If Address is not aligned on a 16-bit boundary, then ASSERT().\r
+ If StartBit is greater than 15, then ASSERT().\r
+ If EndBit is greater than 15, then ASSERT().\r
+ If EndBit is less than StartBit, then ASSERT().\r
+ If Value is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT().\r
+\r
+ @param Address The PCI configuration register to write.\r
+ @param StartBit The ordinal of the least significant bit in the bit field.\r
+ Range 0..15.\r
+ @param EndBit The ordinal of the most significant bit in the bit field.\r
+ Range 0..15.\r
+ @param Value The new value of the bit field.\r
+\r
+ @return The value written back to the PCI configuration register.\r
+\r
+**/\r
+UINT16\r
+EFIAPI\r
+PciExpressBitFieldWrite16 (\r
+ IN UINTN Address,\r
+ IN UINTN StartBit,\r
+ IN UINTN EndBit,\r
+ IN UINT16 Value\r
+ )\r
+{\r
+ ASSERT_INVALID_PCI_ADDRESS (Address);\r
+ return MmioBitFieldWrite16 (\r
+ (UINTN) GetPciExpressBaseAddress () + Address,\r
+ StartBit,\r
+ EndBit,\r
+ Value\r
+ );\r
+}\r
+\r
+/**\r
+ Reads a bit field in a 16-bit PCI configuration, performs a bitwise OR, and\r
+ writes the result back to the bit field in the 16-bit port.\r
+\r
+ Reads the 16-bit PCI configuration register specified by Address, performs a\r
+ bitwise OR between the read result and the value specified by\r
+ OrData, and writes the result to the 16-bit PCI configuration register\r
+ specified by Address. The value written to the PCI configuration register is\r
+ returned. This function must guarantee that all PCI read and write operations\r
+ are serialized. Extra left bits in OrData are stripped.\r
+\r
+ If Address > 0x0FFFFFFF, then ASSERT().\r
+ If Address is not aligned on a 16-bit boundary, then ASSERT().\r
+ If StartBit is greater than 15, then ASSERT().\r
+ If EndBit is greater than 15, then ASSERT().\r
+ If EndBit is less than StartBit, then ASSERT().\r
+ If OrData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT().\r
+\r
+ @param Address The PCI configuration register to write.\r
+ @param StartBit The ordinal of the least significant bit in the bit field.\r
+ Range 0..15.\r
+ @param EndBit The ordinal of the most significant bit in the bit field.\r
+ Range 0..15.\r
+ @param OrData The value to OR with the PCI configuration register.\r
+\r
+ @return The value written back to the PCI configuration register.\r
+\r
+**/\r
+UINT16\r
+EFIAPI\r
+PciExpressBitFieldOr16 (\r
+ IN UINTN Address,\r
+ IN UINTN StartBit,\r
+ IN UINTN EndBit,\r
+ IN UINT16 OrData\r
+ )\r
+{\r
+ ASSERT_INVALID_PCI_ADDRESS (Address);\r
+ return MmioBitFieldOr16 (\r
+ (UINTN) GetPciExpressBaseAddress () + Address,\r
+ StartBit,\r
+ EndBit,\r
+ OrData\r
+ );\r
+}\r
+\r
+/**\r
+ Reads a bit field in a 16-bit PCI configuration register, performs a bitwise\r
+ AND, and writes the result back to the bit field in the 16-bit register.\r
+\r
+ Reads the 16-bit PCI configuration register specified by Address, performs a\r
+ bitwise AND between the read result and the value specified by AndData, and\r
+ writes the result to the 16-bit PCI configuration register specified by\r
+ Address. The value written to the PCI configuration register is returned.\r
+ This function must guarantee that all PCI read and write operations are\r
+ serialized. Extra left bits in AndData are stripped.\r
+\r
+ If Address > 0x0FFFFFFF, then ASSERT().\r
+ If Address is not aligned on a 16-bit boundary, then ASSERT().\r
+ If StartBit is greater than 15, then ASSERT().\r
+ If EndBit is greater than 15, then ASSERT().\r
+ If EndBit is less than StartBit, then ASSERT().\r
+ If AndData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT().\r
+\r
+ @param Address The PCI configuration register to write.\r
+ @param StartBit The ordinal of the least significant bit in the bit field.\r
+ Range 0..15.\r
+ @param EndBit The ordinal of the most significant bit in the bit field.\r
+ Range 0..15.\r
+ @param AndData The value to AND with the PCI configuration register.\r
+\r
+ @return The value written back to the PCI configuration register.\r
+\r
+**/\r
+UINT16\r
+EFIAPI\r
+PciExpressBitFieldAnd16 (\r
+ IN UINTN Address,\r
+ IN UINTN StartBit,\r
+ IN UINTN EndBit,\r
+ IN UINT16 AndData\r
+ )\r
+{\r
+ ASSERT_INVALID_PCI_ADDRESS (Address);\r
+ return MmioBitFieldAnd16 (\r
+ (UINTN) GetPciExpressBaseAddress () + Address,\r
+ StartBit,\r
+ EndBit,\r
+ AndData\r
+ );\r
+}\r
+\r
+/**\r
+ Reads a bit field in a 16-bit port, performs a bitwise AND followed by a\r
+ bitwise OR, and writes the result back to the bit field in the\r
+ 16-bit port.\r
+\r
+ Reads the 16-bit PCI configuration register specified by Address, performs a\r
+ bitwise AND followed by a bitwise OR between the read result and\r
+ the value specified by AndData, and writes the result to the 16-bit PCI\r
+ configuration register specified by Address. The value written to the PCI\r
+ configuration register is returned. This function must guarantee that all PCI\r
+ read and write operations are serialized. Extra left bits in both AndData and\r
+ OrData are stripped.\r
+\r
+ If Address > 0x0FFFFFFF, then ASSERT().\r
+ If Address is not aligned on a 16-bit boundary, then ASSERT().\r
+ If StartBit is greater than 15, then ASSERT().\r
+ If EndBit is greater than 15, then ASSERT().\r
+ If EndBit is less than StartBit, then ASSERT().\r
+ If AndData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT().\r
+ If OrData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT().\r
+\r
+ @param Address The PCI configuration register to write.\r
+ @param StartBit The ordinal of the least significant bit in the bit field.\r
+ Range 0..15.\r
+ @param EndBit The ordinal of the most significant bit in the bit field.\r
+ Range 0..15.\r
+ @param AndData The value to AND with the PCI configuration register.\r
+ @param OrData The value to OR with the result of the AND operation.\r
+\r
+ @return The value written back to the PCI configuration register.\r
+\r
+**/\r
+UINT16\r
+EFIAPI\r
+PciExpressBitFieldAndThenOr16 (\r
+ IN UINTN Address,\r
+ IN UINTN StartBit,\r
+ IN UINTN EndBit,\r
+ IN UINT16 AndData,\r
+ IN UINT16 OrData\r
+ )\r
+{\r
+ ASSERT_INVALID_PCI_ADDRESS (Address);\r
+ return MmioBitFieldAndThenOr16 (\r
+ (UINTN) GetPciExpressBaseAddress () + Address,\r
+ StartBit,\r
+ EndBit,\r
+ AndData,\r
+ OrData\r
+ );\r
+}\r
+\r
+/**\r
+ Reads a 32-bit PCI configuration register.\r
+\r
+ Reads and returns the 32-bit PCI configuration register specified by Address.\r
+ This function must guarantee that all PCI read and write operations are\r
+ serialized.\r
+\r
+ If Address > 0x0FFFFFFF, then ASSERT().\r
+ If Address is not aligned on a 32-bit boundary, then ASSERT().\r
+\r
+ @param Address The address that encodes the PCI Bus, Device, Function and\r
+ Register.\r
+\r
+ @return The read value from the PCI configuration register.\r
+\r
+**/\r
+UINT32\r
+EFIAPI\r
+PciExpressRead32 (\r
+ IN UINTN Address\r
+ )\r
+{\r
+ ASSERT_INVALID_PCI_ADDRESS (Address);\r
+ return MmioRead32 ((UINTN) GetPciExpressBaseAddress () + Address);\r
+}\r
+\r
+/**\r
+ Writes a 32-bit PCI configuration register.\r
+\r
+ Writes the 32-bit PCI configuration register specified by Address with the\r
+ value specified by Value. Value is returned. This function must guarantee\r
+ that all PCI read and write operations are serialized.\r
+\r
+ If Address > 0x0FFFFFFF, then ASSERT().\r
+ If Address is not aligned on a 32-bit boundary, then ASSERT().\r
+\r
+ @param Address The address that encodes the PCI Bus, Device, Function and\r
+ Register.\r
+ @param Value The value to write.\r
+\r
+ @return The value written to the PCI configuration register.\r
+\r
+**/\r
+UINT32\r
+EFIAPI\r
+PciExpressWrite32 (\r
+ IN UINTN Address,\r
+ IN UINT32 Value\r
+ )\r
+{\r
+ ASSERT_INVALID_PCI_ADDRESS (Address);\r
+ return MmioWrite32 ((UINTN) GetPciExpressBaseAddress () + Address, Value);\r
+}\r
+\r
+/**\r
+ Performs a bitwise OR of a 32-bit PCI configuration register with\r
+ a 32-bit value.\r
+\r
+ Reads the 32-bit PCI configuration register specified by Address, performs a\r
+ bitwise OR between the read result and the value specified by\r
+ OrData, and writes the result to the 32-bit PCI configuration register\r
+ specified by Address. The value written to the PCI configuration register is\r
+ returned. This function must guarantee that all PCI read and write operations\r
+ are serialized.\r
+\r
+ If Address > 0x0FFFFFFF, then ASSERT().\r
+ If Address is not aligned on a 32-bit boundary, then ASSERT().\r
+\r
+ @param Address The address that encodes the PCI Bus, Device, Function and\r
+ Register.\r
+ @param OrData The value to OR with the PCI configuration register.\r
+\r
+ @return The value written back to the PCI configuration register.\r
+\r
+**/\r
+UINT32\r
+EFIAPI\r
+PciExpressOr32 (\r
+ IN UINTN Address,\r
+ IN UINT32 OrData\r
+ )\r
+{\r
+ ASSERT_INVALID_PCI_ADDRESS (Address);\r
+ return MmioOr32 ((UINTN) GetPciExpressBaseAddress () + Address, OrData);\r
+}\r
+\r
+/**\r
+ Performs a bitwise AND of a 32-bit PCI configuration register with a 32-bit\r
+ value.\r
+\r
+ Reads the 32-bit PCI configuration register specified by Address, performs a\r
+ bitwise AND between the read result and the value specified by AndData, and\r
+ writes the result to the 32-bit PCI configuration register specified by\r
+ Address. The value written to the PCI configuration register is returned.\r
+ This function must guarantee that all PCI read and write operations are\r
+ serialized.\r
+\r
+ If Address > 0x0FFFFFFF, then ASSERT().\r
+ If Address is not aligned on a 32-bit boundary, then ASSERT().\r
+\r
+ @param Address The address that encodes the PCI Bus, Device, Function and\r
+ Register.\r
+ @param AndData The value to AND with the PCI configuration register.\r
+\r
+ @return The value written back to the PCI configuration register.\r
+\r
+**/\r
+UINT32\r
+EFIAPI\r
+PciExpressAnd32 (\r
+ IN UINTN Address,\r
+ IN UINT32 AndData\r
+ )\r
+{\r
+ ASSERT_INVALID_PCI_ADDRESS (Address);\r
+ return MmioAnd32 ((UINTN) GetPciExpressBaseAddress () + Address, AndData);\r
+}\r
+\r
+/**\r
+ Performs a bitwise AND of a 32-bit PCI configuration register with a 32-bit\r
+ value, followed a bitwise OR with another 32-bit value.\r
+\r
+ Reads the 32-bit PCI configuration register specified by Address, performs a\r
+ bitwise AND between the read result and the value specified by AndData,\r
+ performs a bitwise OR between the result of the AND operation and\r
+ the value specified by OrData, and writes the result to the 32-bit PCI\r
+ configuration register specified by Address. The value written to the PCI\r
+ configuration register is returned. This function must guarantee that all PCI\r
+ read and write operations are serialized.\r
+\r
+ If Address > 0x0FFFFFFF, then ASSERT().\r
+ If Address is not aligned on a 32-bit boundary, then ASSERT().\r
+\r
+ @param Address The address that encodes the PCI Bus, Device, Function and\r
+ Register.\r
+ @param AndData The value to AND with the PCI configuration register.\r
+ @param OrData The value to OR with the result of the AND operation.\r
+\r
+ @return The value written back to the PCI configuration register.\r
+\r
+**/\r
+UINT32\r
+EFIAPI\r
+PciExpressAndThenOr32 (\r
+ IN UINTN Address,\r
+ IN UINT32 AndData,\r
+ IN UINT32 OrData\r
+ )\r
+{\r
+ ASSERT_INVALID_PCI_ADDRESS (Address);\r
+ return MmioAndThenOr32 (\r
+ (UINTN) GetPciExpressBaseAddress () + Address,\r
+ AndData,\r
+ OrData\r
+ );\r
+}\r
+\r
+/**\r
+ Reads a bit field of a PCI configuration register.\r
+\r
+ Reads the bit field in a 32-bit PCI configuration register. The bit field is\r
+ specified by the StartBit and the EndBit. The value of the bit field is\r
+ returned.\r
+\r
+ If Address > 0x0FFFFFFF, then ASSERT().\r
+ If Address is not aligned on a 32-bit boundary, then ASSERT().\r
+ If StartBit is greater than 31, then ASSERT().\r
+ If EndBit is greater than 31, then ASSERT().\r
+ If EndBit is less than StartBit, then ASSERT().\r
+\r
+ @param Address The PCI configuration register to read.\r
+ @param StartBit The ordinal of the least significant bit in the bit field.\r
+ Range 0..31.\r
+ @param EndBit The ordinal of the most significant bit in the bit field.\r
+ Range 0..31.\r
+\r
+ @return The value of the bit field read from the PCI configuration register.\r
+\r
+**/\r
+UINT32\r
+EFIAPI\r
+PciExpressBitFieldRead32 (\r
+ IN UINTN Address,\r
+ IN UINTN StartBit,\r
+ IN UINTN EndBit\r
+ )\r
+{\r
+ ASSERT_INVALID_PCI_ADDRESS (Address);\r
+ return MmioBitFieldRead32 (\r
+ (UINTN) GetPciExpressBaseAddress () + Address,\r
+ StartBit,\r
+ EndBit\r
+ );\r
+}\r
+\r
+/**\r
+ Writes a bit field to a PCI configuration register.\r
+\r
+ Writes Value to the bit field of the PCI configuration register. The bit\r
+ field is specified by the StartBit and the EndBit. All other bits in the\r
+ destination PCI configuration register are preserved. The new value of the\r
+ 32-bit register is returned.\r
+\r
+ If Address > 0x0FFFFFFF, then ASSERT().\r
+ If Address is not aligned on a 32-bit boundary, then ASSERT().\r
+ If StartBit is greater than 31, then ASSERT().\r
+ If EndBit is greater than 31, then ASSERT().\r
+ If EndBit is less than StartBit, then ASSERT().\r
+ If Value is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT().\r
+\r
+ @param Address The PCI configuration register to write.\r
+ @param StartBit The ordinal of the least significant bit in the bit field.\r
+ Range 0..31.\r
+ @param EndBit The ordinal of the most significant bit in the bit field.\r
+ Range 0..31.\r
+ @param Value The new value of the bit field.\r
+\r
+ @return The value written back to the PCI configuration register.\r
+\r
+**/\r
+UINT32\r
+EFIAPI\r
+PciExpressBitFieldWrite32 (\r
+ IN UINTN Address,\r
+ IN UINTN StartBit,\r
+ IN UINTN EndBit,\r
+ IN UINT32 Value\r
+ )\r
+{\r
+ ASSERT_INVALID_PCI_ADDRESS (Address);\r
+ return MmioBitFieldWrite32 (\r
+ (UINTN) GetPciExpressBaseAddress () + Address,\r
+ StartBit,\r
+ EndBit,\r
+ Value\r
+ );\r
+}\r
+\r
+/**\r
+ Reads a bit field in a 32-bit PCI configuration, performs a bitwise OR, and\r
+ writes the result back to the bit field in the 32-bit port.\r
+\r
+ Reads the 32-bit PCI configuration register specified by Address, performs a\r
+ bitwise OR between the read result and the value specified by\r
+ OrData, and writes the result to the 32-bit PCI configuration register\r
+ specified by Address. The value written to the PCI configuration register is\r
+ returned. This function must guarantee that all PCI read and write operations\r
+ are serialized. Extra left bits in OrData are stripped.\r
+\r
+ If Address > 0x0FFFFFFF, then ASSERT().\r
+ If Address is not aligned on a 32-bit boundary, then ASSERT().\r
+ If StartBit is greater than 31, then ASSERT().\r
+ If EndBit is greater than 31, then ASSERT().\r
+ If EndBit is less than StartBit, then ASSERT().\r
+ If OrData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT().\r
+\r
+ @param Address The PCI configuration register to write.\r
+ @param StartBit The ordinal of the least significant bit in the bit field.\r
+ Range 0..31.\r
+ @param EndBit The ordinal of the most significant bit in the bit field.\r
+ Range 0..31.\r
+ @param OrData The value to OR with the PCI configuration register.\r
+\r
+ @return The value written back to the PCI configuration register.\r
+\r
+**/\r
+UINT32\r
+EFIAPI\r
+PciExpressBitFieldOr32 (\r
+ IN UINTN Address,\r
+ IN UINTN StartBit,\r
+ IN UINTN EndBit,\r
+ IN UINT32 OrData\r
+ )\r
+{\r
+ ASSERT_INVALID_PCI_ADDRESS (Address);\r
+ return MmioBitFieldOr32 (\r
+ (UINTN) GetPciExpressBaseAddress () + Address,\r
+ StartBit,\r
+ EndBit,\r
+ OrData\r
+ );\r
+}\r
+\r
+/**\r
+ Reads a bit field in a 32-bit PCI configuration register, performs a bitwise\r
+ AND, and writes the result back to the bit field in the 32-bit register.\r
+\r
+ Reads the 32-bit PCI configuration register specified by Address, performs a\r
+ bitwise AND between the read result and the value specified by AndData, and\r
+ writes the result to the 32-bit PCI configuration register specified by\r
+ Address. The value written to the PCI configuration register is returned.\r
+ This function must guarantee that all PCI read and write operations are\r
+ serialized. Extra left bits in AndData are stripped.\r
+\r
+ If Address > 0x0FFFFFFF, then ASSERT().\r
+ If Address is not aligned on a 32-bit boundary, then ASSERT().\r
+ If StartBit is greater than 31, then ASSERT().\r
+ If EndBit is greater than 31, then ASSERT().\r
+ If EndBit is less than StartBit, then ASSERT().\r
+ If AndData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT().\r
+\r
+ @param Address The PCI configuration register to write.\r
+ @param StartBit The ordinal of the least significant bit in the bit field.\r
+ Range 0..31.\r
+ @param EndBit The ordinal of the most significant bit in the bit field.\r
+ Range 0..31.\r
+ @param AndData The value to AND with the PCI configuration register.\r
+\r
+ @return The value written back to the PCI configuration register.\r
+\r
+**/\r
+UINT32\r
+EFIAPI\r
+PciExpressBitFieldAnd32 (\r
+ IN UINTN Address,\r
+ IN UINTN StartBit,\r
+ IN UINTN EndBit,\r
+ IN UINT32 AndData\r
+ )\r
+{\r
+ ASSERT_INVALID_PCI_ADDRESS (Address);\r
+ return MmioBitFieldAnd32 (\r
+ (UINTN) GetPciExpressBaseAddress () + Address,\r
+ StartBit,\r
+ EndBit,\r
+ AndData\r
+ );\r
+}\r
+\r
+/**\r
+ Reads a bit field in a 32-bit port, performs a bitwise AND followed by a\r
+ bitwise OR, and writes the result back to the bit field in the\r
+ 32-bit port.\r
+\r
+ Reads the 32-bit PCI configuration register specified by Address, performs a\r
+ bitwise AND followed by a bitwise OR between the read result and\r
+ the value specified by AndData, and writes the result to the 32-bit PCI\r
+ configuration register specified by Address. The value written to the PCI\r
+ configuration register is returned. This function must guarantee that all PCI\r
+ read and write operations are serialized. Extra left bits in both AndData and\r
+ OrData are stripped.\r
+\r
+ If Address > 0x0FFFFFFF, then ASSERT().\r
+ If Address is not aligned on a 32-bit boundary, then ASSERT().\r
+ If StartBit is greater than 31, then ASSERT().\r
+ If EndBit is greater than 31, then ASSERT().\r
+ If EndBit is less than StartBit, then ASSERT().\r
+ If AndData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT().\r
+ If OrData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT().\r
+\r
+ @param Address The PCI configuration register to write.\r
+ @param StartBit The ordinal of the least significant bit in the bit field.\r
+ Range 0..31.\r
+ @param EndBit The ordinal of the most significant bit in the bit field.\r
+ Range 0..31.\r
+ @param AndData The value to AND with the PCI configuration register.\r
+ @param OrData The value to OR with the result of the AND operation.\r
+\r
+ @return The value written back to the PCI configuration register.\r
+\r
+**/\r
+UINT32\r
+EFIAPI\r
+PciExpressBitFieldAndThenOr32 (\r
+ IN UINTN Address,\r
+ IN UINTN StartBit,\r
+ IN UINTN EndBit,\r
+ IN UINT32 AndData,\r
+ IN UINT32 OrData\r
+ )\r
+{\r
+ ASSERT_INVALID_PCI_ADDRESS (Address);\r
+ return MmioBitFieldAndThenOr32 (\r
+ (UINTN) GetPciExpressBaseAddress () + Address,\r
+ StartBit,\r
+ EndBit,\r
+ AndData,\r
+ OrData\r
+ );\r
+}\r
+\r
+/**\r
+ Reads a range of PCI configuration registers into a caller supplied buffer.\r
+\r
+ Reads the range of PCI configuration registers specified by StartAddress and\r
+ Size into the buffer specified by Buffer. This function only allows the PCI\r
+ configuration registers from a single PCI function to be read. Size is\r
+ returned. When possible 32-bit PCI configuration read cycles are used to read\r
+ from StartAdress to StartAddress + Size. Due to alignment restrictions, 8-bit\r
+ and 16-bit PCI configuration read cycles may be used at the beginning and the\r
+ end of the range.\r
+\r
+ If StartAddress > 0x0FFFFFFF, then ASSERT().\r
+ If ((StartAddress & 0xFFF) + Size) > 0x1000, then ASSERT().\r
+ If Size > 0 and Buffer is NULL, then ASSERT().\r
+\r
+ @param StartAddress The starting address that encodes the PCI Bus, Device,\r
+ Function and Register.\r
+ @param Size The size in bytes of the transfer.\r
+ @param Buffer The pointer to a buffer receiving the data read.\r
+\r
+ @return Size read data from StartAddress.\r
+\r
+**/\r
+UINTN\r
+EFIAPI\r
+PciExpressReadBuffer (\r
+ IN UINTN StartAddress,\r
+ IN UINTN Size,\r
+ OUT VOID *Buffer\r
+ )\r
+{\r
+ UINTN ReturnValue;\r
+\r
+ ASSERT_INVALID_PCI_ADDRESS (StartAddress);\r
+ ASSERT (((StartAddress & 0xFFF) + Size) <= 0x1000);\r
+\r
+ if (Size == 0) {\r
+ return Size;\r
+ }\r
+\r
+ ASSERT (Buffer != NULL);\r
+\r
+ //\r
+ // Save Size for return\r
+ //\r
+ ReturnValue = Size;\r
+\r
+ if ((StartAddress & 1) != 0) {\r
+ //\r
+ // Read a byte if StartAddress is byte aligned\r
+ //\r
+ *(volatile UINT8 *)Buffer = PciExpressRead8 (StartAddress);\r
+ StartAddress += sizeof (UINT8);\r
+ Size -= sizeof (UINT8);\r
+ Buffer = (UINT8*)Buffer + 1;\r
+ }\r
+\r
+ if (Size >= sizeof (UINT16) && (StartAddress & 2) != 0) {\r
+ //\r
+ // Read a word if StartAddress is word aligned\r
+ //\r
+ WriteUnaligned16 ((UINT16 *) Buffer, (UINT16) PciExpressRead16 (StartAddress));\r
+\r
+ StartAddress += sizeof (UINT16);\r
+ Size -= sizeof (UINT16);\r
+ Buffer = (UINT16*)Buffer + 1;\r
+ }\r
+\r
+ while (Size >= sizeof (UINT32)) {\r
+ //\r
+ // Read as many double words as possible\r
+ //\r
+ WriteUnaligned32 ((UINT32 *) Buffer, (UINT32) PciExpressRead32 (StartAddress));\r
+\r
+ StartAddress += sizeof (UINT32);\r
+ Size -= sizeof (UINT32);\r
+ Buffer = (UINT32*)Buffer + 1;\r
+ }\r
+\r
+ if (Size >= sizeof (UINT16)) {\r
+ //\r
+ // Read the last remaining word if exist\r
+ //\r
+ WriteUnaligned16 ((UINT16 *) Buffer, (UINT16) PciExpressRead16 (StartAddress));\r
+ StartAddress += sizeof (UINT16);\r
+ Size -= sizeof (UINT16);\r
+ Buffer = (UINT16*)Buffer + 1;\r
+ }\r
+\r
+ if (Size >= sizeof (UINT8)) {\r
+ //\r
+ // Read the last remaining byte if exist\r
+ //\r
+ *(volatile UINT8 *)Buffer = PciExpressRead8 (StartAddress);\r
+ }\r
+\r
+ return ReturnValue;\r
+}\r
+\r
+/**\r
+ Copies the data in a caller supplied buffer to a specified range of PCI\r
+ configuration space.\r
+\r
+ Writes the range of PCI configuration registers specified by StartAddress and\r
+ Size from the buffer specified by Buffer. This function only allows the PCI\r
+ configuration registers from a single PCI function to be written. Size is\r
+ returned. When possible 32-bit PCI configuration write cycles are used to\r
+ write from StartAdress to StartAddress + Size. Due to alignment restrictions,\r
+ 8-bit and 16-bit PCI configuration write cycles may be used at the beginning\r
+ and the end of the range.\r
+\r
+ If StartAddress > 0x0FFFFFFF, then ASSERT().\r
+ If ((StartAddress & 0xFFF) + Size) > 0x1000, then ASSERT().\r
+ If Size > 0 and Buffer is NULL, then ASSERT().\r
+\r
+ @param StartAddress The starting address that encodes the PCI Bus, Device,\r
+ Function and Register.\r
+ @param Size The size in bytes of the transfer.\r
+ @param Buffer The pointer to a buffer containing the data to write.\r
+\r
+ @return Size written to StartAddress.\r
+\r
+**/\r
+UINTN\r
+EFIAPI\r
+PciExpressWriteBuffer (\r
+ IN UINTN StartAddress,\r
+ IN UINTN Size,\r
+ IN VOID *Buffer\r
+ )\r
+{\r
+ UINTN ReturnValue;\r
+\r
+ ASSERT_INVALID_PCI_ADDRESS (StartAddress);\r
+ ASSERT (((StartAddress & 0xFFF) + Size) <= 0x1000);\r
+\r
+ if (Size == 0) {\r
+ return 0;\r
+ }\r
+\r
+ ASSERT (Buffer != NULL);\r
+\r
+ //\r
+ // Save Size for return\r
+ //\r
+ ReturnValue = Size;\r
+\r
+ if ((StartAddress & 1) != 0) {\r
+ //\r
+ // Write a byte if StartAddress is byte aligned\r
+ //\r
+ PciExpressWrite8 (StartAddress, *(UINT8*)Buffer);\r
+ StartAddress += sizeof (UINT8);\r
+ Size -= sizeof (UINT8);\r
+ Buffer = (UINT8*)Buffer + 1;\r
+ }\r
+\r
+ if (Size >= sizeof (UINT16) && (StartAddress & 2) != 0) {\r
+ //\r
+ // Write a word if StartAddress is word aligned\r
+ //\r
+ PciExpressWrite16 (StartAddress, ReadUnaligned16 ((UINT16*)Buffer));\r
+ StartAddress += sizeof (UINT16);\r
+ Size -= sizeof (UINT16);\r
+ Buffer = (UINT16*)Buffer + 1;\r
+ }\r
+\r
+ while (Size >= sizeof (UINT32)) {\r
+ //\r
+ // Write as many double words as possible\r
+ //\r
+ PciExpressWrite32 (StartAddress, ReadUnaligned32 ((UINT32*)Buffer));\r
+ StartAddress += sizeof (UINT32);\r
+ Size -= sizeof (UINT32);\r
+ Buffer = (UINT32*)Buffer + 1;\r
+ }\r
+\r
+ if (Size >= sizeof (UINT16)) {\r
+ //\r
+ // Write the last remaining word if exist\r
+ //\r
+ PciExpressWrite16 (StartAddress, ReadUnaligned16 ((UINT16*)Buffer));\r
+ StartAddress += sizeof (UINT16);\r
+ Size -= sizeof (UINT16);\r
+ Buffer = (UINT16*)Buffer + 1;\r
+ }\r
+\r
+ if (Size >= sizeof (UINT8)) {\r
+ //\r
+ // Write the last remaining byte if exist\r
+ //\r
+ PciExpressWrite8 (StartAddress, *(UINT8*)Buffer);\r
+ }\r
+\r
+ return ReturnValue;\r
+}\r
projects / mirror_edk2.git / commitdiff