--- /dev/null
+/** @file\r
+ This file declares FindFv PPI used to locate FVs that contain PEIMs in PEI\r
+\r
+ Copyright (c) 2006, Intel Corporation \r
+ All rights reserved. This program and the accompanying materials \r
+ are licensed and made available under the terms and conditions of the BSD License \r
+ which accompanies this distribution. The full text of the license may be found at \r
+ http://opensource.org/licenses/bsd-license.php \r
+\r
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, \r
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. \r
+\r
+ Module Name: FindFv.h\r
+\r
+ @par Revision Reference:\r
+ This PPI is defined in PEI CIS\r
+ Version 0.91\r
+\r
+**/\r
+\r
+#ifndef __FIND_FV_H__\r
+#define __FIND_FV_H__\r
+\r
+#define EFI_PEI_FIND_FV_PPI_GUID \\r
+ { \\r
+ 0x36164812, 0xa023, 0x44e5, {0xbd, 0x85, 0x5, 0xbf, 0x3c, 0x77, 0x0, 0xaa } \\r
+ }\r
+\r
+typedef struct _EFI_PEI_FIND_FV_PPI EFI_PEI_FIND_FV_PPI;\r
+\r
+/**\r
+ This interface returns the base address of the firmware volume whose index \r
+ was passed in FvNumber.Once this function reports a firmware volume \r
+ index/base address pair, that index/address pairing must continue throughout PEI.\r
+\r
+ @param PeiServices Pointer to the PEI Services Table.\r
+ @param This Interface pointer that implements the Find FV service.\r
+ @param FvNumber The index of the firmware volume to locate.\r
+ @param FvAddress The address of the volume to discover.\r
+\r
+ @retval EFI_SUCCESS An additional firmware volume was found.\r
+ @retval EFI_OUT_OF_RESOURCES There are no firmware volumes for the given FvNumber.\r
+ @retval EFI_INVALID_PARAMETER *FvAddress is NULL.\r
+\r
+**/\r
+typedef\r
+EFI_STATUS\r
+(EFIAPI *EFI_PEI_FIND_FV_FINDFV) (\r
+ IN EFI_PEI_FIND_FV_PPI *This,\r
+ IN EFI_PEI_SERVICES **PeiServices,\r
+ UINT8 *FvNumber,\r
+ EFI_FIRMWARE_VOLUME_HEADER **FVAddress\r
+ );\r
+\r
+/**\r
+ @par Ppi Description:\r
+ Hardware mechanisms for locating FVs in a platform vary widely.\r
+ EFI_PEI_FIND_FV_PPI serves to abstract this variation so that the \r
+ PEI Foundation can remain standard across a wide variety of platforms.\r
+\r
+ @param FindFv\r
+ Service that abstracts the location of additional firmware volumes.\r
+\r
+**/\r
+struct _EFI_PEI_FIND_FV_PPI {\r
+ EFI_PEI_FIND_FV_FINDFV FindFv;\r
+};\r
+\r
+extern EFI_GUID gEfiFindFvPpiGuid;\r
+\r
+#endif\r
--- /dev/null
+/*++\r
+\r
+Copyright (c) 2006, Intel Corporation \r
+All rights reserved. This program and the accompanying materials \r
+are licensed and made available under the terms and conditions of the BSD License \r
+which accompanies this distribution. The full text of the license may be found at \r
+http://opensource.org/licenses/bsd-license.php \r
+ \r
+THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, \r
+WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. \r
+\r
+Module Name:\r
+ CustomizedDecompress.h\r
+ \r
+Abstract:\r
+ The user Customized Decompress Protocol Interface\r
+\r
+--*/\r
+\r
+#ifndef __CUSTOMIZED_DECOMPRESS_H__\r
+#define __CUSTOMIZED_DECOMPRESS_H__\r
+\r
+#define EFI_CUSTOMIZED_DECOMPRESS_PROTOCOL_GUID \\r
+ { 0x9a44198e, 0xa4a2, 0x44e6, {0x8a, 0x1f, 0x39, 0xbe, 0xfd, 0xac, 0x89, 0x6f } }\r
+\r
+typedef struct _EFI_CUSTOMIZED_DECOMPRESS_PROTOCOL EFI_CUSTOMIZED_DECOMPRESS_PROTOCOL;\r
+\r
+typedef\r
+EFI_STATUS\r
+(EFIAPI *EFI_CUSTOMIZED_DECOMPRESS_GET_INFO) (\r
+ IN EFI_CUSTOMIZED_DECOMPRESS_PROTOCOL *This,\r
+ IN VOID *Source,\r
+ IN UINT32 SourceSize,\r
+ OUT UINT32 *DestinationSize,\r
+ OUT UINT32 *ScratchSize\r
+ );\r
+/*++\r
+\r
+Routine Description:\r
+\r
+ The GetInfo() function retrieves the size of the uncompressed buffer \r
+ and the temporary scratch buffer required to decompress the buffer \r
+ specified by Source and SourceSize. If the size of the uncompressed\r
+ buffer or the size of the scratch buffer cannot be determined from \r
+ the compressed data specified by Source and SourceData, then \r
+ EFI_INVALID_PARAMETER is returned. Otherwise, the size of the uncompressed\r
+ buffer is returned in DestinationSize, the size of the scratch buffer is \r
+ returned in ScratchSize, and EFI_SUCCESS is returned.\r
+ \r
+ The GetInfo() function does not have scratch buffer available to perform \r
+ a thorough checking of the validity of the source data. It just retrieves\r
+ the 'Original Size' field from the beginning bytes of the source data and\r
+ output it as DestinationSize. And ScratchSize is specific to the decompression\r
+ implementation.\r
+\r
+Arguments:\r
+\r
+ This - The protocol instance pointer\r
+ Source - The source buffer containing the compressed data.\r
+ SourceSize - The size, in bytes, of source buffer.\r
+ DestinationSize - A pointer to the size, in bytes, of the uncompressed buffer\r
+ that will be generated when the compressed buffer specified \r
+ by Source and SourceSize is decompressed.\r
+ ScratchSize - A pointer to the size, in bytes, of the scratch buffer that \r
+ is required to decompress the compressed buffer specified by\r
+ Source and SourceSize.\r
+\r
+Returns:\r
+ EFI_SUCCESS - The size of the uncompressed data was returned in DestinationSize\r
+ and the size of the scratch buffer was returned in ScratchSize.\r
+ EFI_INVALID_PARAMETER - The size of the uncompressed data or the size of the scratch\r
+ buffer cannot be determined from the compressed data specified by \r
+ Source and SourceData.\r
+\r
+--*/\r
+\r
+\r
+typedef\r
+EFI_STATUS\r
+(EFIAPI *EFI_CUSTOMIZED_DECOMPRESS_DECOMPRESS) (\r
+ IN EFI_CUSTOMIZED_DECOMPRESS_PROTOCOL *This,\r
+ IN VOID* Source,\r
+ IN UINT32 SourceSize,\r
+ IN OUT VOID* Destination,\r
+ IN UINT32 DestinationSize,\r
+ IN OUT VOID* Scratch,\r
+ IN UINT32 ScratchSize\r
+ );\r
+/*++\r
+\r
+Routine Description:\r
+\r
+ The Decompress() function extracts decompressed data to its original form.\r
+ \r
+ This protocol is designed so that the decompression algorithm can be \r
+ implemented without using any memory services. As a result, the \r
+ Decompress() function is not allowed to call AllocatePool() or \r
+ AllocatePages() in its implementation. It is the caller's responsibility \r
+ to allocate and free the Destination and Scratch buffers.\r
+ \r
+ If the compressed source data specified by Source and SourceSize is \r
+ sucessfully decompressed into Destination, then EFI_SUCCESS is returned. \r
+ If the compressed source data specified by Source and SourceSize is not in \r
+ a valid compressed data format, then EFI_INVALID_PARAMETER is returned.\r
+\r
+Arguments:\r
+\r
+ This - The protocol instance pointer\r
+ Source - The source buffer containing the compressed data.\r
+ SourceSize - The size of source data.\r
+ Destination - On output, the destination buffer that contains \r
+ the uncompressed data.\r
+ DestinationSize - The size of destination buffer. The size of destination\r
+ buffer needed is obtained from GetInfo().\r
+ Scratch - A temporary scratch buffer that is used to perform the \r
+ decompression.\r
+ ScratchSize - The size of scratch buffer. The size of scratch buffer needed\r
+ is obtained from GetInfo().\r
+\r
+Returns:\r
+\r
+ EFI_SUCCESS - Decompression completed successfully, and the uncompressed \r
+ buffer is returned in Destination.\r
+ EFI_INVALID_PARAMETER \r
+ - The source buffer specified by Source and SourceSize is \r
+ corrupted (not in a valid compressed format).\r
+\r
+--*/\r
+\r
+struct _EFI_CUSTOMIZED_DECOMPRESS_PROTOCOL {\r
+ EFI_CUSTOMIZED_DECOMPRESS_GET_INFO GetInfo;\r
+ EFI_CUSTOMIZED_DECOMPRESS_DECOMPRESS Decompress;\r
+};\r
+\r
+extern EFI_GUID gEfiCustomizedDecompressProtocolGuid;\r
+\r
+#endif\r
--- /dev/null
+/*++\r
+\r
+Copyright (c) 2006, Intel Corporation \r
+All rights reserved. This program and the accompanying materials \r
+are licensed and made available under the terms and conditions of the BSD License \r
+which accompanies this distribution. The full text of the license may be found at \r
+http://opensource.org/licenses/bsd-license.php \r
+ \r
+THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, \r
+WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. \r
+\r
+Module Name:\r
+ EdkDecompress.h\r
+ \r
+Abstract:\r
+ The Tiano Decompress Protocol Interface\r
+\r
+--*/\r
+\r
+#ifndef __EDK_DECOMPRESS_H__\r
+#define __EDK_DECOMPRESS_H__\r
+\r
+#define EFI_TIANO_DECOMPRESS_PROTOCOL_GUID \\r
+ { 0xe84cf29c, 0x191f, 0x4eae, {0x96, 0xe1, 0xf4, 0x6a, 0xec, 0xea, 0xea, 0x0b } }\r
+\r
+typedef struct _EFI_TIANO_DECOMPRESS_PROTOCOL EFI_TIANO_DECOMPRESS_PROTOCOL;\r
+\r
+typedef\r
+EFI_STATUS\r
+(EFIAPI *EFI_TIANO_DECOMPRESS_GET_INFO) (\r
+ IN EFI_TIANO_DECOMPRESS_PROTOCOL *This,\r
+ IN VOID *Source,\r
+ IN UINT32 SourceSize,\r
+ OUT UINT32 *DestinationSize,\r
+ OUT UINT32 *ScratchSize\r
+ );\r
+/*++\r
+\r
+Routine Description:\r
+\r
+ The GetInfo() function retrieves the size of the uncompressed buffer \r
+ and the temporary scratch buffer required to decompress the buffer \r
+ specified by Source and SourceSize. If the size of the uncompressed\r
+ buffer or the size of the scratch buffer cannot be determined from \r
+ the compressed data specified by Source and SourceData, then \r
+ EFI_INVALID_PARAMETER is returned. Otherwise, the size of the uncompressed\r
+ buffer is returned in DestinationSize, the size of the scratch buffer is \r
+ returned in ScratchSize, and EFI_SUCCESS is returned.\r
+ \r
+ The GetInfo() function does not have scratch buffer available to perform \r
+ a thorough checking of the validity of the source data. It just retrieves\r
+ the 'Original Size' field from the beginning bytes of the source data and\r
+ output it as DestinationSize. And ScratchSize is specific to the decompression\r
+ implementation.\r
+\r
+Arguments:\r
+\r
+ This - The protocol instance pointer\r
+ Source - The source buffer containing the compressed data.\r
+ SourceSize - The size, in bytes, of source buffer.\r
+ DestinationSize - A pointer to the size, in bytes, of the uncompressed buffer\r
+ that will be generated when the compressed buffer specified \r
+ by Source and SourceSize is decompressed.\r
+ ScratchSize - A pointer to the size, in bytes, of the scratch buffer that \r
+ is required to decompress the compressed buffer specified by\r
+ Source and SourceSize.\r
+\r
+Returns:\r
+ EFI_SUCCESS - The size of the uncompressed data was returned in DestinationSize\r
+ and the size of the scratch buffer was returned in ScratchSize.\r
+ EFI_INVALID_PARAMETER - The size of the uncompressed data or the size of the scratch\r
+ buffer cannot be determined from the compressed data specified by \r
+ Source and SourceData.\r
+\r
+--*/\r
+\r
+\r
+typedef\r
+EFI_STATUS\r
+(EFIAPI *EFI_TIANO_DECOMPRESS_DECOMPRESS) (\r
+ IN EFI_TIANO_DECOMPRESS_PROTOCOL *This,\r
+ IN VOID* Source,\r
+ IN UINT32 SourceSize,\r
+ IN OUT VOID* Destination,\r
+ IN UINT32 DestinationSize,\r
+ IN OUT VOID* Scratch,\r
+ IN UINT32 ScratchSize\r
+ );\r
+/*++\r
+\r
+Routine Description:\r
+\r
+ The Decompress() function extracts decompressed data to its original form.\r
+ \r
+ This protocol is designed so that the decompression algorithm can be \r
+ implemented without using any memory services. As a result, the \r
+ Decompress() function is not allowed to call AllocatePool() or \r
+ AllocatePages() in its implementation. It is the caller's responsibility \r
+ to allocate and free the Destination and Scratch buffers.\r
+ \r
+ If the compressed source data specified by Source and SourceSize is \r
+ sucessfully decompressed into Destination, then EFI_SUCCESS is returned. \r
+ If the compressed source data specified by Source and SourceSize is not in \r
+ a valid compressed data format, then EFI_INVALID_PARAMETER is returned.\r
+\r
+Arguments:\r
+\r
+ This - The protocol instance pointer\r
+ Source - The source buffer containing the compressed data.\r
+ SourceSize - The size of source data.\r
+ Destination - On output, the destination buffer that contains \r
+ the uncompressed data.\r
+ DestinationSize - The size of destination buffer. The size of destination\r
+ buffer needed is obtained from GetInfo().\r
+ Scratch - A temporary scratch buffer that is used to perform the \r
+ decompression.\r
+ ScratchSize - The size of scratch buffer. The size of scratch buffer needed\r
+ is obtained from GetInfo().\r
+\r
+Returns:\r
+\r
+ EFI_SUCCESS - Decompression completed successfully, and the uncompressed \r
+ buffer is returned in Destination.\r
+ EFI_INVALID_PARAMETER \r
+ - The source buffer specified by Source and SourceSize is \r
+ corrupted (not in a valid compressed format).\r
+\r
+--*/\r
+\r
+struct _EFI_TIANO_DECOMPRESS_PROTOCOL {\r
+ EFI_TIANO_DECOMPRESS_GET_INFO GetInfo;\r
+ EFI_TIANO_DECOMPRESS_DECOMPRESS Decompress;\r
+};\r
+\r
+extern EFI_GUID gEfiTianoDecompressProtocolGuid;\r
+\r
+#endif\r
--- /dev/null
+/*++\r
+\r
+Copyright (c) 2006, Intel Corporation\r
+All rights reserved. This program and the accompanying materials\r
+are licensed and made available under the terms and conditions of the BSD License\r
+which accompanies this distribution. The full text of the license may be found at\r
+http://opensource.org/licenses/bsd-license.php\r
+\r
+THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,\r
+WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.\r
+\r
+Module Name:\r
+ LoadPe32Image.h\r
+\r
+Abstract:\r
+ Load File protocol as defined in the EFI 1.0 specification.\r
+\r
+ Load file protocol exists to supports the addition of new boot devices,\r
+ and to support booting from devices that do not map well to file system.\r
+ Network boot is done via a LoadFile protocol.\r
+\r
+ EFI 1.0 can boot from any device that produces a LoadFile protocol.\r
+\r
+--*/\r
+\r
+#ifndef __LOAD_PE32_IMAGE_H__\r
+#define __LOAD_PE32_IMAGE_H__\r
+\r
+#define PE32_IMAGE_PROTOCOL_GUID \\r
+ {0x5cb5c776,0x60d5,0x45ee,{0x88,0x3c,0x45,0x27,0x8,0xcd,0x74,0x3f }}\r
+\r
+#define EFI_LOAD_PE_IMAGE_ATTRIBUTE_NONE 0x00\r
+#define EFI_LOAD_PE_IMAGE_ATTRIBUTE_RUNTIME_REGISTRATION 0x01\r
+#define EFI_LOAD_PE_IMAGE_ATTRIBUTE_DEBUG_IMAGE_INFO_TABLE_REGISTRATION 0x02\r
+\r
+typedef struct _EFI_PE32_IMAGE_PROTOCOL EFI_PE32_IMAGE_PROTOCOL;\r
+\r
+typedef\r
+EFI_STATUS\r
+(EFIAPI *LOAD_PE_IMAGE) (\r
+ IN EFI_PE32_IMAGE_PROTOCOL *This,\r
+ IN EFI_HANDLE ParentImageHandle,\r
+ IN EFI_DEVICE_PATH_PROTOCOL *FilePath,\r
+ IN VOID *SourceBuffer OPTIONAL,\r
+ IN UINTN SourceSize,\r
+ IN EFI_PHYSICAL_ADDRESS DstBuffer OPTIONAL,\r
+ OUT UINTN *NumberOfPages OPTIONAL,\r
+ OUT EFI_HANDLE *ImageHandle,\r
+ OUT EFI_PHYSICAL_ADDRESS *EntryPoint OPTIONAL,\r
+ IN UINT32 Attribute\r
+ );\r
+\r
+typedef\r
+EFI_STATUS\r
+(EFIAPI *UNLOAD_PE_IMAGE) (\r
+ IN EFI_PE32_IMAGE_PROTOCOL *This,\r
+ IN EFI_HANDLE ImageHandle\r
+ );\r
+\r
+struct _EFI_PE32_IMAGE_PROTOCOL {\r
+ LOAD_PE_IMAGE LoadPeImage;\r
+ UNLOAD_PE_IMAGE UnLoadPeImage;\r
+};\r
+\r
+extern EFI_GUID gEfiLoadPeImageProtocolGuid;\r
+\r
+#endif\r
+\r
#\r
################################################################################\r
[Guids.common]\r
+ gEfiPeiPeCoffLoaderGuid = { 0xD8117CFF, 0x94A6, 0x11D4, { 0x9A, 0x3A, 0x00, 0x90, 0x27, 0x3F, 0xC1, 0x4D }}\r
gEfiGenericPlatformVariableGuid = { 0x59d1c24f, 0x50f1, 0x401a, { 0xb1, 0x01, 0xf3, 0x3e, 0x0d, 0xae, 0xd4, 0x43 }}\r
gPeiPerformanceHobGuid = { 0xEC4DF5AF, 0x4395, 0x4CC9, { 0x94, 0xDE, 0x77, 0x50, 0x6D, 0x12, 0xC7, 0xB8 }}\r
gEfiCapsuleVendorGuid = { 0x711C703F, 0xC285, 0x4B10, { 0xA3, 0xB0, 0x36, 0xEC, 0xBD, 0x3C, 0x8B, 0xE2 }}\r
#\r
################################################################################\r
[Protocols.common]\r
+ gEfiFindFvPpiGuid = { 0x36164812, 0xA023, 0x44E5, { 0xBD, 0x85, 0x05, 0xBF, 0x3C, 0x77, 0x00, 0xAA }}\r
gEfiScsiIoProtocolGuid = { 0x403CD195, 0xF233, 0x48EC, { 0x84, 0x55, 0xB2, 0xE5, 0x2F, 0x1D, 0x9E, 0x02 }}\r
gPerformanceProtocolGuid = { 0x76B6BDFA, 0x2ACD, 0x4462, { 0x9E, 0x3F, 0xCB, 0x58, 0xC9, 0x69, 0xD9, 0x37 }}\r
gEfiUsbAtapiProtocolGuid = { 0x2B2F68DA, 0x0CD2, 0x44CF, { 0x8E, 0x8B, 0xBB, 0xA2, 0x0B, 0x1B, 0x5B, 0x75 }}\r
gEfiGenericMemTestProtocolGuid = { 0x309DE7F1, 0x7F5E, 0x4ACE, { 0xB4, 0x9C, 0x53, 0x1B, 0xE5, 0xAA, 0x95, 0xEF }}\r
gEfiPrintProtocolGuid = { 0xDF2D868E, 0x32FC, 0x4CF0, { 0x8E, 0x6B, 0xFF, 0xD9, 0x5D, 0x13, 0x43, 0xD0 }}\r
gEfiLoadPeImageProtocolGuid = { 0x5CB5C776, 0x60D5, 0x45EE, { 0x88, 0x3C, 0x45, 0x27, 0x08, 0xCD, 0x74, 0x3F }}\r
+ gEfiTianoDecompressProtocolGuid = { 0xE84CF29C, 0x191F, 0x4EAE, { 0x96, 0xE1, 0xF4, 0x6A, 0xEC, 0xEA, 0xEA, 0x0B }}\r
+ gEfiCustomizedDecompressProtocolGuid = { 0x9A44198E, 0xA4A2, 0x44E6, { 0x8A, 0x1F, 0x39, 0xBE, 0xFD, 0xAC, 0x89, 0x6F }}\r
gEfiCapsuleArchProtocolGuid = { 0x5053697E, 0x2EBC, 0x4819, { 0x90, 0xD9, 0x05, 0x80, 0xDE, 0xEE, 0x57, 0x54 }}\r
\r
\r
<GuidValue>59d1c24f-50f1-401a-b101-f33e0daed443</GuidValue>\r
<HelpText>The variable space Guid to pair with a Unicode string name to tag an EFI variable</HelpText>\r
</Entry>\r
+ <Entry Name="PeiPeCoffLoader">\r
+ <C_Name>gEfiPeiPeCoffLoaderGuid</C_Name>\r
+ <GuidValue>D8117CFF-94A6-11D4-9A3A-0090273FC14D</GuidValue>\r
+ <HelpText/>\r
+ </Entry>\r
</GuidDeclarations>\r
<ProtocolDeclarations>\r
<Entry Name="Capsule">\r
<GuidValue>5053697E-2EBC-4819-90D9-0580DEEE5754</GuidValue>\r
<HelpText/>\r
</Entry>\r
+ <Entry Name="CustomizedDecompress">\r
+ <C_Name>gEfiCustomizedDecompressProtocolGuid</C_Name>\r
+ <GuidValue>9A44198E-A4A2-44E6-8A1F-39BEFDAC896F</GuidValue>\r
+ <HelpText/>\r
+ </Entry>\r
+ <Entry Name="TianoDecompress">\r
+ <C_Name>gEfiTianoDecompressProtocolGuid</C_Name>\r
+ <GuidValue>E84CF29C-191F-4EAE-96E1-F46AECEAEA0B</GuidValue>\r
+ <HelpText/>\r
+ </Entry>\r
<Entry Name="LoadPeImage">\r
<C_Name>gEfiLoadPeImageProtocolGuid</C_Name>\r
<GuidValue>5CB5C776-60D5-45EE-883C-452708CD743F</GuidValue>\r
<GuidValue>403CD195-F233-48EC-8455-B2E52F1D9E02</GuidValue>\r
<HelpText/>\r
</Entry>\r
+ <Entry Name="FindFv">\r
+ <C_Name>gEfiFindFvPpiGuid</C_Name>\r
+ <GuidValue>36164812-A023-44E5-BD85-05BF3C7700AA</GuidValue>\r
+ <HelpText/>\r
+ </Entry>\r
</ProtocolDeclarations>\r
<PpiDeclarations>\r
<Entry Name="BaseMemoryTest">\r
\r
**/\r
\r
+//\r
+// Include common header file for this module.\r
+//\r
+#include "CommonHeader.h"\r
+\r
#include "DiskIo.h"\r
\r
//\r
#ifndef _DISK_IO_H\r
#define _DISK_IO_H\r
\r
+//\r
+// Include common header file for this module.\r
+//\r
+#include "CommonHeader.h"\r
+\r
#include <Uefi.h>\r
#include <Protocol/BlockIo.h>\r
#include <Protocol/ComponentName.h>\r
#/** @file\r
-# Component description file for DiskIo module.\r
+# Component description file for DiskIo module.\r
+#\r
+# DiskIo driver that layers it's self on every Block IO protocol in the system.\r
+# Copyright (c) 2006 - 2007, Intel Corporation\r
#\r
-# Copyright (c) 2006 - 2007, Intel Corporation\r
# All rights reserved. This program and the accompanying materials\r
# are licensed and made available under the terms and conditions of the BSD License\r
# which accompanies this distribution. The full text of the license may be found at\r
# http://opensource.org/licenses/bsd-license.php\r
-#\r
# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,\r
# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.\r
#\r
#\r
# VALID_ARCHITECTURES = IA32 X64 IPF EBC\r
#\r
-# DRIVER_BINDING = gDiskIoDriverBinding\r
-# COMPONENT_NAME = gDiskIoComponentName\r
+# DRIVER_BINDING = gDiskIoDriverBinding \r
+# COMPONENT_NAME = gDiskIoComponentName \r
#\r
\r
################################################################################\r
ComponentName.c\r
DiskIo.h\r
diskio.c\r
+ CommonHeader.h\r
+ EntryPoint.c\r
\r
\r
################################################################################\r
[Includes]\r
$(WORKSPACE)/MdePkg/Include/Library\r
\r
-################################################################################\r
-#\r
-# Package Dependency Section - list of Package files that are required for\r
-# this module.\r
-#\r
-################################################################################\r
-\r
-[Packages]\r
- $(WORKSPACE)/MdeModulePkg/MdeModulePkg.dec\r
- $(WORKSPACE)/MdePkg/MdePkg.dec\r
-\r
-\r
################################################################################\r
#\r
# Library Class Section - list of Library Classes that are required for\r
\r
**/\r
\r
+//\r
+// Include common header file for this module.\r
+//\r
+#include "CommonHeader.h"\r
+\r
#include "DiskIo.h"\r
\r
EFI_DRIVER_BINDING_PROTOCOL gDiskIoDriverBinding = {\r
\r
**/\r
\r
+//\r
+// Include common header file for this module.\r
+//\r
+#include "CommonHeader.h"\r
+\r
#include "Partition.h"\r
\r
//\r
**/\r
\r
\r
+//\r
+// Include common header file for this module.\r
+//\r
+#include "CommonHeader.h"\r
+\r
#include "Partition.h"\r
\r
\r
**/\r
\r
\r
+//\r
+// Include common header file for this module.\r
+//\r
+#include "CommonHeader.h"\r
+\r
#include "Partition.h"\r
\r
\r
\r
--*/\r
\r
+//\r
+// Include common header file for this module.\r
+//\r
+#include "CommonHeader.h"\r
+\r
#include "Partition.h"\r
\r
STATIC\r
**/\r
\r
\r
+//\r
+// Include common header file for this module.\r
+//\r
+#include "CommonHeader.h"\r
+\r
#include "Partition.h"\r
\r
//\r
#ifndef _PARTITION_H \r
#define _PARTITION_H \r
\r
+//\r
+// Include common header file for this module.\r
+//\r
+#include "CommonHeader.h"\r
+\r
#include <Uefi.h>\r
#include <Protocol/BlockIo.h>\r
#include <Guid/Gpt.h>\r
# that represents the bytes Start to End of the Parent Block IO \r
# device (one partition of physical BlockIo device, \r
# which can be one of GPT, MBR, ElTorito partition).\r
+# Copyright (c) 2006 - 2007, Intel Corporation\r
#\r
-# Copyright (c) 2006 - 2007, Intel Corporation\r
# All rights reserved. This program and the accompanying materials\r
# are licensed and made available under the terms and conditions of the BSD License\r
# which accompanies this distribution. The full text of the license may be found at\r
# http://opensource.org/licenses/bsd-license.php\r
-# \r
# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,\r
# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.\r
#\r
ElTorito.c\r
Partition.c\r
Partition.h\r
+ CommonHeader.h\r
+ EntryPoint.c\r
\r
\r
################################################################################\r
[Includes]\r
$(WORKSPACE)/MdePkg/Include/Library\r
\r
-################################################################################\r
-#\r
-# Package Dependency Section - list of Package files that are required for\r
-# this module.\r
-#\r
-################################################################################\r
-\r
-[Packages]\r
- MdePkg/MdePkg.dec\r
-\r
-\r
################################################################################\r
#\r
# Library Class Section - list of Library Classes that are required for\r
**/\r
\r
\r
+//\r
+// Include common header file for this module.\r
+//\r
+#include "CommonHeader.h"\r
+\r
#include "SecurityStub.h"\r
\r
//\r
#define _SECURITY_STUB_ARCH_PROTOCOL_H\r
\r
\r
+//\r
+// Include common header file for this module.\r
+//\r
+#include "CommonHeader.h"\r
+\r
//\r
// Common header files for this module.\r
//\r
#/** @file\r
-# Component description file for SecurityStub module\r
+# Component description file for SecurityStub module\r
+#\r
+# This driver supports platform security service.\r
+# Copyright (c) 2006 - 2007, Intel Corporation\r
#\r
-# Copyright (c) 2006 - 2007, Intel Corporation\r
# All rights reserved. This program and the accompanying materials\r
# are licensed and made available under the terms and conditions of the BSD License\r
# which accompanies this distribution. The full text of the license may be found at\r
# http://opensource.org/licenses/bsd-license.php\r
-#\r
# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,\r
# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.\r
#\r
SecurityStub.c\r
SecurityStub.h\r
SecurityStub.dxs\r
+ CommonHeader.h\r
\r
\r
################################################################################\r
[Includes]\r
$(WORKSPACE)/MdePkg/Include/Library\r
\r
-################################################################################\r
-#\r
-# Package Dependency Section - list of Package files that are required for\r
-# this module.\r
-#\r
-################################################################################\r
-\r
-[Packages]\r
- MdePkg/MdePkg.dec\r
-\r
-\r
################################################################################\r
#\r
# Library Class Section - list of Library Classes that are required for\r
projects / mirror_edk2.git / commitdiff