Refreshed patches and removed patches applied upstream

[mirror_smartmontools-debian.git] / debian / patches / 61_cciss-doc.patch

Author: Matt Taggart <taggart@debian.org>
Subject: Update cciss examples/docs

Here is a patch that adds examples for cciss to the default smartd.conf
file and adds some more cciss documentation to the manpages. I think this
patch gets things to parity with the 3ware documentation with a couple
minor exceptions

--- a/smartd.8.in
+++ b/smartd.8.in
@@ -153,6 +153,10 @@ Directive in the configuration file; see
 .SH 
 OPTIONS
 
+.B If a cciss controller is used
+then the corresponding block device (/dev/cciss/c?d?) must be listed,
+along with the \'\-d cciss,N\' Directive (see below).
+
 .TP
 .B \-A PREFIX, \-\-attributelog=PREFIX
 Writes \fBsmartd\fP attribute information (normalized and raw
--- a/smartd.conf
+++ b/smartd.conf
@@ -92,6 +92,12 @@ DEVICESCAN -n standby -m root -M exec /u
 # NOTE: On Windows, DEVICESCAN works also for 3ware controllers.
 #/dev/hdc,0 -a -s L/../../2/01
 #/dev/hdc,1 -a -s L/../../2/03
+#
+# Monitor 2 disks connected to the first HP SmartArray controller which
+# uses the cciss driver. Start long tests on Sunday nights and short
+# self-tests every night and send errors to root
+#/dev/cciss/c0d0 -d cciss,0 -a -s (L/../../7/02|S/../.././02) -m root
+#/dev/cciss/c0d0 -d cciss,1 -a -s (L/../../7/03|S/../.././03) -m root
 
 # Monitor 3 ATA disks directly connected to a HighPoint RocketRAID. Start long
 # self-tests Sundays between 1-2, 2-3, and 3-4 am. 
--- a/smartd.conf.5.in
+++ b/smartd.conf.5.in
@@ -97,10 +97,11 @@ Section below!
 .B # This is an example smartd startup config file
 .B # /usr/local/etc/smartd.conf for monitoring three
 .B # ATA disks, three SCSI disks, six ATA disks
-.B # behind two 3ware controllers, three SATA disks
-.B # directly connected to the HighPoint Rocket-
-.B # RAID controller, two SATA disks connected to
-.B # the HighPoint RocketRAID controller via a pmport
+.B # behind two 3ware controllers, two disks on a cciss
+.B # controller, three SATA disks directly connected
+.B # to the HighPoint Rocket-RAID controller,
+.B # two SATA disks connected to the HighPoint
+.B # RocketRAID controller via a pmport
 .B # device, four SATA disks connected to an Areca
 .B # RAID controller, and one SATA disk.
 .B #
@@ -178,6 +179,13 @@ Section below!
 .\" %ENDIF OS FreeBSD
 .B #
 .nf
+.B # Monitor 2 disks connected to the first HP SmartArray controller which
+.B # uses the cciss driver. Start long tests on Sunday nights and short
+.B # self-tests every night and send errors to root
+.B \ \ /dev/cciss/c0d0 -d cciss,0 -a -s (L/../../7/02|S/../.././02) -m root
+.B \ \ /dev/cciss/c0d0 -d cciss,1 -a -s (L/../../7/03|S/../.././03) -m root
+.B #
+.nf
 .B # Three SATA disks on a HighPoint RocketRAID controller.
 .B # Start short self-tests daily between 1-2, 2-3, and
 .B # 3-4 am.
@@ -1497,6 +1505,9 @@ configuration file Directives might be:
 If you want more frequent information, use:
 .B -a.
 
+.B If a cciss controller is used
+then the corresponding block device (/dev/cciss/c?d?) must be listed,
+along with the \'\-d cciss,N\' Directive (see below).
 .TP
 .B ADDITIONAL DETAILS ABOUT DEVICESCAN
 If a non-comment entry in the configuration file is the text