*
* Home page of code is: http://smartmontools.sourceforge.net
*
- * Copyright (C) 2002-11 Bruce Allen <smartmontools-support@lists.sourceforge.net>
- * Copyright (C) 2008-14 Christian Franke <smartmontools-support@lists.sourceforge.net>
+ * Copyright (C) 2002-11 Bruce Allen
+ * Copyright (C) 2008-15 Christian Franke
* Copyright (C) 1999-2000 Michael Cornwell <cornwell@acm.org>
*
* This program is free software; you can redistribute it and/or modify
#include "utility.h"
#include "knowndrives.h"
-const char * ataprint_cpp_cvsid = "$Id: ataprint.cpp 3982 2014-08-16 21:07:19Z samm2 $"
+const char * ataprint_cpp_cvsid = "$Id: ataprint.cpp 4104 2015-06-03 18:50:39Z chrfranke $"
ATAPRINT_H_CVSID;
}
+static const char * get_form_factor(unsigned short word168)
+{
+ // Table A.32 of T13/2161-D (ACS-3) Revision 4p, September 19, 2013
+ // Table 236 of T13/BSR INCITS 529 (ACS-4) Revision 04, August 25, 2014
+ switch (word168) {
+ case 0x1: return "5.25 inches";
+ case 0x2: return "3.5 inches";
+ case 0x3: return "2.5 inches";
+ case 0x4: return "1.8 inches";
+ case 0x5: return "< 1.8 inches";
+ case 0x6: return "mSATA"; // ACS-4
+ case 0x7: return "M.2"; // ACS-4
+ case 0x8: return "MicroSSD"; // ACS-4
+ case 0x9: return "CFast"; // ACS-4
+ default : return 0;
+ }
+}
+
static int find_msb(unsigned short word)
{
for (int bit = 15; bit >= 0; bit--)
static const char * get_ata_minor_version(const ata_identify_device * drive)
{
+ // Table 10 of X3T13/2008D (ATA-3) Revision 7b, January 27, 1997
+ // Table 28 of T13/1410D (ATA/ATAPI-6) Revision 3b, February 26, 2002
+ // Table 31 of T13/1699-D (ATA8-ACS) Revision 6a, September 6, 2008
+ // Table 46 of T13/BSR INCITS 529 (ACS-4) Revision 08, April 28, 2015
switch (drive->minor_rev_num) {
case 0x0001: return "ATA-1 X3T9.2/781D prior to revision 4";
case 0x0002: return "ATA-1 published, ANSI X3.221-1994";
case 0x0052: return "ATA8-ACS T13/1699-D revision 3b";
+ case 0x005e: return "ACS-4 T13/BSR INCITS 529 revision 5";
+
+ case 0x006d: return "ACS-3 T13/2161-D revision 5";
+
+ case 0x0082: return "ACS-2 published, ANSI INCITS 482-2012";
+
case 0x0107: return "ATA8-ACS T13/1699-D revision 2d";
+ case 0x010a: return "ACS-3 published, ANSI INCITS 522-2014";
+
case 0x0110: return "ACS-2 T13/2015-D revision 3";
+ case 0x011b: return "ACS-3 T13/2161-D revision 4";
+
default: return 0;
}
}
-static const char * get_sata_version(const ata_identify_device * drive)
+static const char * get_pata_version(unsigned short word222, char (& buf)[32])
+{
+ switch (word222 & 0x0fff) {
+ default: snprintf(buf, sizeof(buf),
+ "Unknown (0x%03x)", word222 & 0x0fff); return buf;
+ case 0x001:
+ case 0x003: return "ATA8-APT";
+ case 0x002: return "ATA/ATAPI-7";
+ }
+}
+
+static const char * get_sata_version(unsigned short word222, char (& buf)[32])
{
- unsigned short word222 = drive->words088_255[222-88];
- if ((word222 & 0xf000) != 0x1000)
- return 0;
switch (find_msb(word222 & 0x0fff)) {
- default: return "SATA >3.1";
+ default: snprintf(buf, sizeof(buf),
+ "SATA >3.2 (0x%03x)", word222 & 0x0fff); return buf;
+ case 7: return "SATA 3.2";
case 6: return "SATA 3.1";
case 5: return "SATA 3.0";
case 4: return "SATA 2.6";
case 2: return "SATA II Ext";
case 1: return "SATA 1.0a";
case 0: return "ATA8-AST";
- case -1: return 0;
+ case -1: return "Unknown";
}
}
if (level <= 0)
return 0;
switch (level) {
- default: return ">6.0 Gb/s";
+ default: return ">6.0 Gb/s (7)";
+ case 6: return ">6.0 Gb/s (6)";
+ case 5: return ">6.0 Gb/s (5)";
+ case 4: return ">6.0 Gb/s (4)";
case 3: return "6.0 Gb/s";
case 2: return "3.0 Gb/s";
case 1: return "1.5 Gb/s";
pout("Model Family: %s\n", dbentry->modelfamily);
pout("Device Model: %s\n", infofound(model));
+
if (!dont_print_serial_number) {
pout("Serial Number: %s\n", infofound(serial));
int naa = ata_get_wwn(drive, oui, unique_id);
if (naa >= 0)
pout("LU WWN Device Id: %x %06x %09" PRIx64 "\n", naa, oui, unique_id);
+ }
- // Additional Product Identifier (OEM Id) string in words 170-173
- // (e08130r1, added in ACS-2 Revision 1, December 17, 2008)
- if (0x2020 <= drive->words088_255[170-88] && drive->words088_255[170-88] <= 0x7e7e) {
- char add[8+1];
- ata_format_id_string(add, (const unsigned char *)(drive->words088_255+170-88), sizeof(add)-1);
- if (add[0])
- pout("Add. Product Id: %s\n", add);
- }
+ // Additional Product Identifier (OEM Id) string in words 170-173
+ // (e08130r1, added in ACS-2 Revision 1, December 17, 2008)
+ if (0x2020 <= drive->words088_255[170-88] && drive->words088_255[170-88] <= 0x7e7e) {
+ char add[8+1];
+ ata_format_id_string(add, (const unsigned char *)(drive->words088_255+170-88), sizeof(add)-1);
+ if (add[0])
+ pout("Add. Product Id: %s\n", add);
}
+
pout("Firmware Version: %s\n", infofound(firmware));
if (sizes.capacity) {
// Print form factor if reported
unsigned short word168 = drive->words088_255[168-88];
if (word168) {
- const char * inches;
- switch (word168) {
- case 0x1: inches = "5.25"; break;
- case 0x2: inches = "3.5"; break;
- case 0x3: inches = "2.5"; break;
- case 0x4: inches = "1.8"; break;
- case 0x5: inches = "< 1.8"; break;
- default : inches = 0;
- }
- if (inches)
- pout("Form Factor: %s inches\n", inches);
+ const char * form_factor = get_form_factor(word168);
+ if (form_factor)
+ pout("Form Factor: %s\n", form_factor);
else
pout("Form Factor: Unknown (0x%04x)\n", word168);
}
}
pout("ATA Version is: %s\n", infofound(ataver.c_str()));
- // If SATA drive print SATA version and speed
- const char * sataver = get_sata_version(drive);
- if (sataver) {
- const char * maxspeed = get_sata_maxspeed(drive);
- const char * curspeed = get_sata_curspeed(drive);
- pout("SATA Version is: %s%s%s%s%s%s\n", sataver,
- (maxspeed ? ", " : ""), (maxspeed ? maxspeed : ""),
- (curspeed ? " (current: " : ""), (curspeed ? curspeed : ""),
- (curspeed ? ")" : ""));
+ // Print Transport specific version
+ char buf[32] = "";
+ unsigned short word222 = drive->words088_255[222-88];
+ if (word222 != 0x0000 && word222 != 0xffff) switch (word222 >> 12) {
+ case 0x0: // PATA
+ pout("Transport Type: Parallel, %s\n", get_pata_version(word222, buf));
+ break;
+ case 0x1: // SATA
+ {
+ const char * sataver = get_sata_version(word222, buf);
+ const char * maxspeed = get_sata_maxspeed(drive);
+ const char * curspeed = get_sata_curspeed(drive);
+ pout("SATA Version is: %s%s%s%s%s%s\n", sataver,
+ (maxspeed ? ", " : ""), (maxspeed ? maxspeed : ""),
+ (curspeed ? " (current: " : ""), (curspeed ? curspeed : ""),
+ (curspeed ? ")" : ""));
+ }
+ break;
+ case 0xe: // PCIe (ACS-4)
+ pout("Transport Type: PCIe (0x%03x)\n", word222 & 0x0fff);
+ break;
+ default:
+ pout("Transport Type: Unknown (0x%04x)\n", word222);
+ break;
}
// print current time and date and timezone
}
// Get name of log.
-// Table A.2 of T13/2161-D (ACS-3) Revision 4, September 4, 2012
static const char * GetLogName(unsigned logaddr)
{
+ // Table 205 of T13/BSR INCITS 529 (ACS-4) Revision 08, April 28, 2015
+ // Table 112 of Serial ATA Revision 3.2, August 7, 2013
switch (logaddr) {
case 0x00: return "Log Directory";
case 0x01: return "Summary SMART error log";
case 0x0c: return "Pending Defects log"; // ACS-4
case 0x0d: return "LPS Mis-alignment log"; // ACS-2
- case 0x10: return "NCQ Command Error log";
- case 0x11: return "SATA Phy Event Counters";
- case 0x12: return "SATA NCQ Queue Management log"; // ACS-3
- case 0x13: return "SATA NCQ Send and Receive log"; // ACS-3
- case 0x14:
- case 0x15:
+ case 0x0f: return "Sense Data for Successful NCQ Cmds log"; // ACS-4
+ case 0x10: return "SATA NCQ Queued Error log";
+ case 0x11: return "SATA Phy Event Counters log";
+ //case 0x12: return "SATA NCQ Queue Management log"; // SATA 3.0/3.1
+ case 0x12: return "SATA NCQ NON-DATA log"; // SATA 3.2
+ case 0x13: return "SATA NCQ Send and Receive log"; // SATA 3.1
+ case 0x14: return "SATA Hybrid Information log"; // SATA 3.2
+ case 0x15: return "SATA Rebuild Assist log"; // SATA 3.2
case 0x16:
case 0x17: return "Reserved for Serial ATA";
{
if ( ( logaddr <= 0x08)
|| (0x0c <= logaddr && logaddr <= 0x0d)
- || (0x10 <= logaddr && logaddr <= 0x13)
+ || (0x0f <= logaddr && logaddr <= 0x14)
|| (0x19 == logaddr)
|| (0x20 <= logaddr && logaddr <= 0x25)
|| (0x30 == logaddr))
return "R/O";
if ( (0x09 <= logaddr && logaddr <= 0x0a)
+ || (0x15 == logaddr)
|| (0x80 <= logaddr && logaddr <= 0x9f)
|| (0xe0 <= logaddr && logaddr <= 0xe1))
return "R/W";
///////////////////////////////////////////////////////////////////////
// Device statistics (Log 0x04)
-// See Section A.5 of
-// ATA/ATAPI Command Set - 3 (ACS-3)
-// T13/2161-D Revision 2, February 21, 2012.
+// Section A.5 of T13/2161-D (ACS-3) Revision 5, October 28, 2013
+// Section 9.5 of T13/BSR INCITS 529 (ACS-4) Revision 08, April 28, 2015
struct devstat_entry_info
{
const devstat_entry_info devstat_info_0x01[] = {
{ 2, "General Statistics" },
{ 4, "Lifetime Power-On Resets" },
- { 4, "Power-on Hours" }, // spec says no flags(?)
+ { 4, "Power-on Hours" },
{ 6, "Logical Sectors Written" },
{ 6, "Number of Write Commands" },
{ 6, "Logical Sectors Read" },
{ 6, "Number of Read Commands" },
{ 6, "Date and Time TimeStamp" }, // ACS-3
+ { 4, "Pending Error Count" }, // ACS-4
+ { 2, "Workload Utilization" }, // ACS-4
+ { 6, "Utilization Usage Rate" }, // ACS-4 (TODO: field provides 3 values)
{ 0, 0 }
};
{ 4, "Read Recovery Attempts" },
{ 4, "Number of Mechanical Start Failures" },
{ 4, "Number of Realloc. Candidate Logical Sectors" }, // ACS-3
+ { 4, "Number of High Priority Unload Events" }, // ACS-3
{ 0, 0 }
};
const int num_devstat_infos = sizeof(devstat_infos)/sizeof(devstat_infos[0]);
-static void print_device_statistics_page(const unsigned char * data, int page,
- bool & need_trailer)
+static const char * get_device_statistics_page_name(int page)
+{
+ if (page < num_devstat_infos)
+ return devstat_infos[page][0].name;
+ if (page == 0xff)
+ return "Vendor Specific Statistics"; // ACS-4
+ return "Unknown Statistics";
+}
+
+static void print_device_statistics_page(const unsigned char * data, int page)
{
const devstat_entry_info * info = (page < num_devstat_infos ? devstat_infos[page] : 0);
- const char * name = (info ? info[0].name : "Unknown Statistics");
+ const char * name = get_device_statistics_page_name(page);
// Check page number in header
- static const char line[] = " ===== = = == ";
+ static const char line[] = " ===== = = === == ";
if (!data[2]) {
- pout("%3d%s%s (empty) ==\n", page, line, name);
+ pout("0x%02x%s%s (empty) ==\n", page, line, name);
return;
}
if (data[2] != page) {
- pout("%3d%s%s (invalid page %d in header) ==\n", page, line, name, data[2]);
+ pout("0x%02x%s%s (invalid page 0x%02x in header) ==\n", page, line, name, data[2]);
return;
}
- pout("%3d%s%s (rev %d) ==\n", page, line, name, data[0]);
+ pout("0x%02x%s%s (rev %d) ==\n", page, line, name, data[0] | (data[1] << 8));
// Print entries
for (int i = 1, offset = 8; offset < 512-7; i++, offset+=8) {
// Stop if unknown entries contain garbage data due to buggy firmware
if (!info && (data[offset+5] || data[offset+6])) {
- pout("%3d 0x%03x - - [Trailing garbage ignored]\n", page, offset);
+ pout("0x%02x 0x%03x - - [Trailing garbage ignored]\n", page, offset);
break;
}
valstr[0] = '-'; valstr[1] = 0;
}
- pout("%3d 0x%03x %d%c %15s%c %s\n",
+ pout("0x%02x 0x%03x %d %15s %c%c%c%c %s\n",
page, offset,
abs(size),
- (flags & 0x1f ? '+' : ' '), // unknown flags
valstr,
- (flags & 0x20 ? '~' : ' '), // normalized flag
- (info ? info[i].name : "Unknown"));
- if (flags & 0x20)
- need_trailer = true;
+ (flags & 0x20 ? 'N' : '-'), // normalized statistics
+ (flags & 0x10 ? 'D' : '-'), // supports DSN (ACS-3)
+ (flags & 0x08 ? 'C' : '-'), // monitored condition met (ACS-3)
+ (flags & 0x07 ? '+' : ' '), // reserved flags
+ (info ? info[i].name :
+ page == 0xff ? "Vendor Specific" // ACS-4
+ : "Unknown" ));
}
}
else
rc = ataReadSmartLog(device, 0x04, page_0, 1);
if (!rc) {
- pout("Read Device Statistics page 0 failed\n\n");
+ pout("Read Device Statistics page 0x00 failed\n\n");
return false;
}
unsigned char nentries = page_0[8];
if (!(page_0[2] == 0 && nentries > 0)) {
- pout("Device Statistics page 0 is invalid (page=%d, nentries=%d)\n\n", page_0[2], nentries);
+ pout("Device Statistics page 0x00 is invalid (page=0x%02x, nentries=%d)\n\n", page_0[2], nentries);
return false;
}
// Add manually specified pages
bool print_page_0 = false;
for (i = 0; i < single_pages.size() || ssd_page; i++) {
- int page = (i < single_pages.size() ? single_pages[i] : 7);
+ int page = (i < single_pages.size() ? single_pages[i] : 0x07);
if (!page)
print_page_0 = true;
else if (page >= (int)nsectors)
- pout("Device Statistics Log has only %u pages\n", nsectors);
+ pout("Device Statistics Log has only 0x%02x pages\n", nsectors);
else
pages.push_back(page);
- if (page == 7)
+ if (page == 0x07)
ssd_page = false;
}
if (print_page_0) {
pout("Device Statistics (%s Log 0x04) supported pages\n",
use_gplog ? "GP" : "SMART");
- pout("Page Description\n");
+ pout("Page Description\n");
for (i = 0; i < nentries; i++) {
int page = page_0[8+1+i];
- pout("%3d %s\n", page,
- (page < num_devstat_infos ? devstat_infos[page][0].name : "Unknown Statistics"));
+ pout("0x%02x %s\n", page, get_device_statistics_page_name(page));
}
pout("\n");
}
if (!pages.empty()) {
pout("Device Statistics (%s Log 0x04)\n",
use_gplog ? "GP" : "SMART");
- pout("Page Offset Size Value Description\n");
- bool need_trailer = false;
+ pout("Page Offset Size Value Flags Description\n");
int max_page = 0;
-
+
if (!use_gplog)
- for (i = 0; i < pages.size(); i++) {
- int page = pages[i];
- if (max_page < page && page < 0xff)
- max_page = page;
- }
-
+ for (i = 0; i < pages.size(); i++) {
+ int page = pages[i];
+ if (max_page < page && page < 0xff)
+ max_page = page;
+ }
+
raw_buffer pages_buf((max_page+1) * 512);
- if (!use_gplog && !ataReadSmartLog(device, 0x04, pages_buf.data(), max_page+1)) {
- pout("Read Device Statistics pages 0-%d failed\n\n", max_page);
+ if (!use_gplog && !ataReadSmartLog(device, 0x04, pages_buf.data(), max_page+1)) {
+ pout("Read Device Statistics pages 0x00-0x%02x failed\n\n", max_page);
return false;
}
for (i = 0; i < pages.size(); i++) {
int page = pages[i];
- if (use_gplog && !ataReadLogExt(device, 0x04, 0, page, pages_buf.data(), 1)) {
- pout("Read Device Statistics page %d failed\n\n", page);
- return false;
+ if (use_gplog) {
+ if (!ataReadLogExt(device, 0x04, 0, page, pages_buf.data(), 1)) {
+ pout("Read Device Statistics page 0x%02x failed\n\n", page);
+ return false;
+ }
}
+ else if (page > max_page)
+ continue;
int offset = (use_gplog ? 0 : page * 512);
- print_device_statistics_page(pages_buf.data() + offset, page, need_trailer);
+ print_device_statistics_page(pages_buf.data() + offset, page);
}
- if (need_trailer)
- pout("%30s|_ ~ normalized value\n", "");
- pout("\n");
+ pout("%32s|||_ C monitored condition met\n", "");
+ pout("%32s||__ D supports DSN\n", "");
+ pout("%32s|___ N normalized value\n\n", "");
}
return true;
}
// Print SMART Extended Comprehensive Error Log (GP Log 0x03)
-static int PrintSmartExtErrorLog(const ata_smart_exterrlog * log,
+static int PrintSmartExtErrorLog(ata_device * device,
+ const firmwarebug_defs & firmwarebugs,
+ const ata_smart_exterrlog * log,
unsigned nsectors, unsigned max_errors)
{
pout("SMART Extended Comprehensive Error Log Version: %u (%u sectors)\n",
"DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,\n"
"SS=sec, and sss=millisec. It \"wraps\" after 49.710 days.\n\n");
+ // Recently read log page
+ ata_smart_exterrlog log_buf;
+ unsigned log_buf_page = ~0;
+
// Iterate through circular buffer in reverse direction
for (unsigned i = 0, errnum = log->device_error_count;
i < errcnt; i++, errnum--, erridx = (erridx > 0 ? erridx - 1 : nentries - 1)) {
- const ata_smart_exterrlog_error_log & entry = log[erridx / 4].error_logs[erridx % 4];
+ // Read log page if needed
+ const ata_smart_exterrlog * log_p;
+ unsigned page = erridx / 4;
+ if (page == 0)
+ log_p = log;
+ else {
+ if (page != log_buf_page) {
+ memset(&log_buf, 0, sizeof(log_buf));
+ if (!ataReadExtErrorLog(device, &log_buf, page, 1, firmwarebugs))
+ break;
+ log_buf_page = page;
+ }
+ log_p = &log_buf;
+ }
+
+ const ata_smart_exterrlog_error_log & entry = log_p->error_logs[erridx % 4];
// Skip unused entries
if (!nonempty(&entry, sizeof(entry))) {
// T13/e06152r0-3 (Additional SCT Temperature Statistics), August - October 2006
// Table 60 of T13/1699-D (ATA8-ACS) Revision 3f, December 2006 (format version 2)
// Table 80 of T13/1699-D (ATA8-ACS) Revision 6a, September 2008 (format version 3)
+ // Table 182 of T13/BSR INCITS 529 (ACS-4) Revision 02a, May 22, 2014 (smart_status field)
pout("Current Temperature: %s Celsius\n",
sct_ptemp(sts->hda_temp, buf1));
pout("Power Cycle Min/Max Temperature: %s/%s Celsius\n",
pout("Lifetime Average Temperature: %2d Celsius\n", avg);
pout("Under/Over Temperature Limit Count: %2u/%u\n",
sts->under_limit_count, sts->over_limit_count);
+
+ if (sts->smart_status) // ACS-4
+ pout("SMART Status: 0x%04x (%s)\n", sts->smart_status,
+ (sts->smart_status == 0x2cf4 ? "FAILED" :
+ sts->smart_status == 0xc24f ? "PASSED" : "Reserved"));
+
+ if (nonempty(sts->vendor_specific, sizeof(sts->vendor_specific))) {
+ pout("Vendor specific:\n");
+ for (unsigned i = 0; i < sizeof(sts->vendor_specific); i++)
+ pout("%02x%c", sts->vendor_specific[i], ((i & 0xf) != 0xf ? ' ' : '\n'));
+ }
}
return 0;
}
// If GP Log is supported use smart log directory for
// error and selftest log support check.
- if ( isGeneralPurposeLoggingCapable(&drive)
+ bool gp_log_supported = !!isGeneralPurposeLoggingCapable(&drive);
+ if ( gp_log_supported
&& ( options.smart_error_log || options.smart_selftest_log
|| options.retry_error_log || options.retry_selftest_log))
need_smart_logdir = true;
if (need_gp_logdir) {
if (firmwarebugs.is_set(BUG_NOLOGDIR))
gplogdir = fake_logdir(&gplogdir_buf, options);
+ else if (!gp_log_supported && !is_permissive()) {
+ if (options.gp_logdir)
+ pout("General Purpose Log Directory not supported\n\n");
+ }
else if (ataReadLogDirectory(device, &gplogdir_buf, true)) {
pout("Read GP Log Directory failed\n\n");
failuretest(OPTIONAL_CMD, returnval|=FAILSMART);
unsigned nsectors = GetNumLogSectors(gplogdir, 0x03, true);
if (!nsectors)
pout("SMART Extended Comprehensive Error Log (GP Log 0x03) not supported\n\n");
- else if (nsectors >= 256)
- pout("SMART Extended Comprehensive Error Log size %u not supported\n\n", nsectors);
else {
- raw_buffer log_03_buf(nsectors * 512);
- ata_smart_exterrlog * log_03 = (ata_smart_exterrlog *)log_03_buf.data();
- if (!ataReadExtErrorLog(device, log_03, nsectors, firmwarebugs)) {
+ // Read only first sector to get error count and index
+ // Print function will read more sectors as needed
+ ata_smart_exterrlog log_03; memset(&log_03, 0, sizeof(log_03));
+ if (!ataReadExtErrorLog(device, &log_03, 0, 1, firmwarebugs)) {
pout("Read SMART Extended Comprehensive Error Log failed\n\n");
failuretest(OPTIONAL_CMD, returnval|=FAILSMART);
}
else {
- if (PrintSmartExtErrorLog(log_03, nsectors, options.smart_ext_error_log))
+ if (PrintSmartExtErrorLog(device, firmwarebugs, &log_03, nsectors, options.smart_ext_error_log))
returnval |= FAILERR;
ok = true;
}
// Print SMART error log
if (do_smart_error_log) {
- if (!( ( smartlogdir && GetNumLogSectors(smartlogdir, 0x01, false))
- || (!smartlogdir && isSmartErrorLogCapable(&smartval, &drive) )
- || is_permissive() )) {
+ if (!( GetNumLogSectors(smartlogdir, 0x01, false)
+ || ( !(smartlogdir && gp_log_supported)
+ && isSmartErrorLogCapable(&smartval, &drive))
+ || is_permissive() )) {
pout("SMART Error Log not supported\n\n");
}
else {
// Print SMART self-test log
if (do_smart_selftest_log) {
- if (!( ( smartlogdir && GetNumLogSectors(smartlogdir, 0x06, false))
- || (!smartlogdir && isSmartTestLogCapable(&smartval, &drive) )
- || is_permissive() )) {
+ if (!( GetNumLogSectors(smartlogdir, 0x06, false)
+ || ( !(smartlogdir && gp_log_supported)
+ && isSmartTestLogCapable(&smartval, &drive))
+ || is_permissive() )) {
pout("SMART Self-test Log not supported\n\n");
}
else {
projects / mirror_smartmontools-debian.git / blobdiff