* Home page of code is: http://smartmontools.sourceforge.net
*
* Copyright (C) 2002-11 Bruce Allen <smartmontools-support@lists.sourceforge.net>
- * Copyright (C) 2008-11 Christian Franke <smartmontools-support@lists.sourceforge.net>
+ * Copyright (C) 2008-12 Christian Franke <smartmontools-support@lists.sourceforge.net>
* Copyright (C) 1999-2000 Michael Cornwell <cornwell@acm.org>
*
* This program is free software; you can redistribute it and/or modify
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
-#ifdef HAVE_LOCALE_H
-#include <locale.h>
-#endif // #ifdef HAVE_LOCALE_H
#include "int64.h"
#include "atacmdnames.h"
#include "utility.h"
#include "knowndrives.h"
-const char * ataprint_cpp_cvsid = "$Id: ataprint.cpp 3288 2011-03-09 18:40:36Z chrfranke $"
+const char * ataprint_cpp_cvsid = "$Id: ataprint.cpp 3554 2012-06-01 20:11:46Z chrfranke $"
ATAPRINT_H_CVSID;
print_lba=1;
print_sector=SC;
break;
- case 0x25: /* READ DMA EXT */
+ case 0x25: // READ DMA EXT
case 0x26: // READ DMA QUEUED EXT
case 0xC7: // READ DMA QUEUED
- case 0xC8: /* READ DMA */
- case 0xC9:
+ case 0xC8: // READ DMA (with retries)
+ case 0xC9: // READ DMA (without retries, obsolete since ATA-5)
+ case 0x60: // READ FPDMA QUEUED (NCQ)
error_flag[7] = icrc;
error_flag[6] = unc;
error_flag[5] = mc;
break;
}
break;
- case 0xCA: /* WRITE DMA */
- case 0xCB:
+ case 0xCA: // WRITE DMA (with retries)
+ case 0xCB: // WRITE DMA (without retries, obsolete since ATA-5)
case 0x35: // WRITE DMA EXT
case 0x3D: // WRITE DMA FUA EXT
case 0xCC: // WRITE DMA QUEUED
case 0x36: // WRITE DMA QUEUED EXT
case 0x3E: // WRITE DMA QUEUED FUA EXT
+ case 0x61: // WRITE FPDMA QUEUED (NCQ)
error_flag[7] = icrc;
error_flag[6] = wp;
error_flag[5] = mc;
(const ata_smart_errorlog_error_struct *)0, &data->error);
}
-
-// This returns the capacity of a disk drive and also prints this into
-// a string, using comma separators to make it easier to read. If the
-// drive doesn't support LBA addressing or has no user writable
-// sectors (eg, CDROM or DVD) then routine returns zero.
-static uint64_t determine_capacity(const ata_identify_device * drive, char * pstring)
-{
- // get correct character to use as thousands separator
- const char *separator = ",";
-#ifdef HAVE_LOCALE_H
- struct lconv *currentlocale=NULL;
- setlocale (LC_ALL, "");
- currentlocale=localeconv();
- if (*(currentlocale->thousands_sep))
- separator=(char *)currentlocale->thousands_sep;
-#endif // #ifdef HAVE_LOCALE_H
-
- // get #sectors and turn into bytes
- uint64_t capacity = get_num_sectors(drive) * 512;
- uint64_t retval = capacity;
-
- // print with locale-specific separators (default is comma)
- int started=0, k=1000000000;
- uint64_t power_of_ten = k;
- power_of_ten *= k;
-
- for (k=0; k<7; k++) {
- uint64_t threedigits = capacity/power_of_ten;
- capacity -= threedigits*power_of_ten;
- if (started)
- // we have already printed some digits
- pstring += sprintf(pstring, "%s%03"PRIu64, separator, threedigits);
- else if (threedigits || k==6) {
- // these are the first digits that we are printing
- pstring += sprintf(pstring, "%"PRIu64, threedigits);
- started = 1;
- }
- if (k!=6)
- power_of_ten /= 1000;
- }
-
- return retval;
-}
-
-// Get sector sizes and offset.
-// Return physical sector size if valid else return 0.
-static unsigned determine_sector_sizes(const ata_identify_device * id,
- unsigned & log_sector_size, unsigned & log_sector_offset)
-{
- unsigned short word106 = id->words088_255[106-88];
- if ((word106 & 0xc000) != 0x4000)
- return 0; // word not valid
-
- log_sector_size = 512;
- if (word106 & 0x1000)
- // logical sector size is specified in 16-bit words
- log_sector_size = ((id->words088_255[118-88] << 16) | id->words088_255[117-88]) << 1;
-
- unsigned phy_sector_size = log_sector_size;
- if (word106 & 0x2000)
- // physical sector size is multiple of logical sector size
- phy_sector_size <<= (word106 & 0x0f);
-
- unsigned short word209 = id->words088_255[209-88];
- log_sector_offset = 0;
- if ((word209 & 0xc000) == 0x4000)
- log_sector_offset = (word209 & 0x3fff) * log_sector_size;
-
- return phy_sector_size;
-}
-
static void print_drive_info(const ata_identify_device * drive,
+ const ata_size_info & sizes,
const drive_settings * dbentry)
{
// format drive information (with byte swapping as needed)
pout("Model Family: %s\n", dbentry->modelfamily);
pout("Device Model: %s\n", infofound(model));
- if (!dont_print_serial_number)
+ if (!dont_print_serial_number) {
pout("Serial Number: %s\n", infofound(serial));
+
+ unsigned oui = 0; uint64_t unique_id = 0;
+ int naa = ata_get_wwn(drive, oui, unique_id);
+ if (naa >= 0)
+ pout("LU WWN Device Id: %x %06x %09"PRIx64"\n", naa, oui, unique_id);
+ }
pout("Firmware Version: %s\n", infofound(firmware));
- char capacity[64];
- if (determine_capacity(drive, capacity))
- pout("User Capacity: %s bytes\n", capacity);
-
- // Print sector sizes.
- // Don't print if drive reports the default values.
- // Some from 4KiB sector drives report 512 bytes in IDENTIFY word 106
- // (e.g. Samsung HD204UI).
- unsigned log_sector_size = 0, log_sector_offset = 0;
- unsigned phy_sector_size = determine_sector_sizes(drive, log_sector_size,
- log_sector_offset);
- if (phy_sector_size && !(phy_sector_size == 512 && log_sector_size == 512)) {
- pout("Sector Sizes: %u bytes physical, %u bytes logical",
- phy_sector_size, log_sector_size);
- if (log_sector_offset)
- pout(" (offset %u bytes)", log_sector_offset);
- pout("\n");
+ if (sizes.capacity) {
+ // Print capacity
+ char num[64], cap[32];
+ pout("User Capacity: %s bytes [%s]\n",
+ format_with_thousands_sep(num, sizeof(num), sizes.capacity),
+ format_capacity(cap, sizeof(cap), sizes.capacity));
+
+ // Print sector sizes.
+ if (sizes.phy_sector_size == sizes.log_sector_size)
+ pout("Sector Size: %u bytes logical/physical\n", sizes.log_sector_size);
+ else {
+ pout("Sector Sizes: %u bytes logical, %u bytes physical",
+ sizes.log_sector_size, sizes.phy_sector_size);
+ if (sizes.log_sector_offset)
+ pout(" (offset %u bytes)", sizes.log_sector_offset);
+ pout("\n");
+ }
}
// See if drive is recognized
std::string majorstr, minorstr;
if (version) {
- majorstr = strprintf("%d", abs(version));
- if (description)
- minorstr = description;
- else if (!minorrev)
- minorstr = "Exact ATA specification draft version not indicated";
- else
- minorstr = strprintf("Not recognized. Minor revision code: 0x%04x", minorrev);
+ if (version <= 8) {
+ majorstr = strprintf("%d", abs(version));
+ if (description)
+ minorstr = description;
+ else if (!minorrev)
+ minorstr = "Exact ATA specification draft version not indicated";
+ else
+ minorstr = strprintf("Not recognized. Minor revision code: 0x%04x", minorrev);
+ }
+ else {
+ // Bit 9 in word 80 of ATA IDENTIFY data does not mean "ATA-9" but "ACS-2"
+ // TODO: handle this in ataVersionInfo()
+ majorstr = "8";
+ if (description)
+ minorstr = description;
+ else if (!minorrev)
+ minorstr = strprintf("ACS-%d (revision not indicated)", version-9+2);
+ else
+ minorstr = strprintf("ACS-%d (unknown minor revision code: 0x%04x)", version-9+2, minorrev);
+ }
}
pout("ATA Version is: %s\n", infofound(majorstr.c_str()));
pout("Extended self-test routine\n");
if (isSupportSelfTest(data))
pout("recommended polling time: \t (%4d) minutes.\n",
- (int)data->extend_test_completion_time);
+ TestTime(data, EXTEND_SELF_TEST));
else
pout("recommended polling time: \t Not Supported.\n");
}
static void PrintSmartAttribWithThres(const ata_smart_values * data,
const ata_smart_thresholds_pvt * thresholds,
const ata_vendor_attr_defs & defs,
- int onlyfailed)
+ int onlyfailed, unsigned char format)
{
+ bool brief = !!(format & ata_print_options::FMT_BRIEF);
+ bool hexid = !!(format & ata_print_options::FMT_HEX_ID);
+ bool hexval = !!(format & ata_print_options::FMT_HEX_VAL);
bool needheader = true;
// step through all vendor attributes
pout("SMART Attributes Data Structure revision number: %d\n",(int)data->revnumber);
pout("Vendor Specific SMART Attributes with Thresholds:\n");
}
- pout("ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE\n");
+ if (!brief)
+ pout("ID#%s ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE\n",
+ (!hexid ? "" : " "));
+ else
+ pout("ID#%s ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE\n",
+ (!hexid ? "" : " "));
needheader = false;
}
// Format value, worst, threshold
std::string valstr, worstr, threstr;
if (state > ATTRSTATE_NO_NORMVAL)
- valstr = strprintf("%.3d", attr.current);
+ valstr = (!hexval ? strprintf("%.3d", attr.current)
+ : strprintf("0x%02x", attr.current));
else
- valstr = "---";
+ valstr = (!hexval ? "---" : "----");
if (!(defs[attr.id].flags & ATTRFLAG_NO_WORSTVAL))
- worstr = strprintf("%.3d", attr.worst);
+ worstr = (!hexval ? strprintf("%.3d", attr.worst)
+ : strprintf("0x%02x", attr.worst));
else
- worstr = "---";
+ worstr = (!hexval ? "---" : "----");
if (state > ATTRSTATE_NO_THRESHOLD)
- threstr = strprintf("%.3d", threshold);
+ threstr = (!hexval ? strprintf("%.3d", threshold)
+ : strprintf("0x%02x", threshold));
else
- threstr = "---";
+ threstr = (!hexval ? "---" : "----");
// Print line for each valid attribute
+ std::string idstr = (!hexid ? strprintf("%3d", attr.id)
+ : strprintf("0x%02x", attr.id));
std::string attrname = ata_get_smart_attr_name(attr.id, defs);
- pout("%3d %-24s0x%04x %-3s %-3s %-3s %-10s%-9s%-12s%s\n",
- attr.id, attrname.c_str(), attr.flags,
- valstr.c_str(), worstr.c_str(), threstr.c_str(),
- (ATTRIBUTE_FLAGS_PREFAILURE(attr.flags)? "Pre-fail" : "Old_age"),
- (ATTRIBUTE_FLAGS_ONLINE(attr.flags)? "Always" : "Offline"),
- (state == ATTRSTATE_FAILED_NOW ? "FAILING_NOW" :
- state == ATTRSTATE_FAILED_PAST ? "In_the_past" :
- " -" ),
- ata_format_attr_raw_value(attr, defs).c_str());
- }
- if (!needheader) pout("\n");
+ std::string rawstr = ata_format_attr_raw_value(attr, defs);
+
+ if (!brief)
+ pout("%s %-24s0x%04x %-4s %-4s %-4s %-10s%-9s%-12s%s\n",
+ idstr.c_str(), attrname.c_str(), attr.flags,
+ valstr.c_str(), worstr.c_str(), threstr.c_str(),
+ (ATTRIBUTE_FLAGS_PREFAILURE(attr.flags) ? "Pre-fail" : "Old_age"),
+ (ATTRIBUTE_FLAGS_ONLINE(attr.flags) ? "Always" : "Offline"),
+ (state == ATTRSTATE_FAILED_NOW ? "FAILING_NOW" :
+ state == ATTRSTATE_FAILED_PAST ? "In_the_past"
+ : " -" ) ,
+ rawstr.c_str());
+ else
+ pout("%s %-24s%c%c%c%c%c%c%c %-4s %-4s %-4s %-5s%s\n",
+ idstr.c_str(), attrname.c_str(),
+ (ATTRIBUTE_FLAGS_PREFAILURE(attr.flags) ? 'P' : '-'),
+ (ATTRIBUTE_FLAGS_ONLINE(attr.flags) ? 'O' : '-'),
+ (ATTRIBUTE_FLAGS_PERFORMANCE(attr.flags) ? 'S' : '-'),
+ (ATTRIBUTE_FLAGS_ERRORRATE(attr.flags) ? 'R' : '-'),
+ (ATTRIBUTE_FLAGS_EVENTCOUNT(attr.flags) ? 'C' : '-'),
+ (ATTRIBUTE_FLAGS_SELFPRESERVING(attr.flags) ? 'K' : '-'),
+ (ATTRIBUTE_FLAGS_OTHER(attr.flags) ? '+' : ' '),
+ valstr.c_str(), worstr.c_str(), threstr.c_str(),
+ (state == ATTRSTATE_FAILED_NOW ? "NOW" :
+ state == ATTRSTATE_FAILED_PAST ? "Past"
+ : "-" ),
+ rawstr.c_str());
+
+ }
+
+ if (!needheader) {
+ if (!onlyfailed && brief) {
+ int n = (!hexid ? 28 : 29);
+ pout("%*s||||||_ K auto-keep\n"
+ "%*s|||||__ C event count\n"
+ "%*s||||___ R error rate\n"
+ "%*s|||____ S speed/performance\n"
+ "%*s||_____ O updated online\n"
+ "%*s|______ P prefailure warning\n",
+ n, "", n, "", n, "", n, "", n, "", n, "");
+ }
+ pout("\n");
+ }
}
// Print SMART related SCT capabilities
}
// Get name of log.
-// Table A.2 of T13/2015-D Revision 4a (ACS-2), December 9, 2010.
+// Table A.2 of T13/2161-D Revision 2 (ACS-3), February 21, 2012.
static const char * GetLogName(unsigned logaddr)
{
switch (logaddr) {
case 0x01: return "Summary SMART error log";
case 0x02: return "Comprehensive SMART error log";
case 0x03: return "Ext. Comprehensive SMART error log";
- case 0x04: return "Device Statistics";
+ case 0x04: return "Device Statistics log";
case 0x05: return "Reserved for the CFA"; // ACS-2
case 0x06: return "SMART self-test log";
case 0x07: return "Extended self-test log";
- case 0x08: return "Power Conditions"; // ACS-2
+ case 0x08: return "Power Conditions log"; // ACS-2
case 0x09: return "Selective self-test log";
case 0x0d: return "LPS Mis-alignment log"; // ACS-2
- case 0x10: return "NCQ Command Error";
+ case 0x10: return "NCQ Command Error log";
case 0x11: return "SATA Phy Event Counters";
+ case 0x12: return "SATA NCQ Queue Management log"; // ACS-3
+ case 0x13: return "SATA NCQ Send and Receive log"; // ACS-3
+ case 0x14:
+ case 0x15:
+ case 0x16: return "Reserved for Serial ATA";
+ case 0x19: return "LBA Status log"; // ACS-3
case 0x20: return "Streaming performance log"; // Obsolete
case 0x21: return "Write stream error log";
case 0x22: return "Read stream error log";
case 0x23: return "Delayed sector log"; // Obsolete
+ case 0x24: return "Current Device Internal Status Data log"; // ACS-3
+ case 0x25: return "Saved Device Internal Status Data log"; // ACS-3
+ case 0x30: return "IDENTIFY DEVICE data log"; // ACS-3
case 0xe0: return "SCT Command/Status";
case 0xe1: return "SCT Data Transfer";
default:
return "Device vendor specific log";
if (0x80 <= logaddr && logaddr <= 0x9f)
return "Host vendor specific log";
- if (0x12 <= logaddr && logaddr <= 0x17)
- return "Reserved for Serial ATA";
return "Reserved";
}
/*NOTREACHED*/
(page * 512) + i,
p[ 0], p[ 1], p[ 2], p[ 3], p[ 4], p[ 5], p[ 6], p[ 7],
p[ 8], p[ 9], p[10], p[11], p[12], p[13], p[14], p[15]);
-#define P(n) (isprint((int)(p[n]))?(int)(p[n]):'.')
+#define P(n) (' ' <= p[n] && p[n] <= '~' ? (int)p[n] : '.')
pout("|%c%c%c%c%c%c%c%c"
"%c%c%c%c%c%c%c%c|\n",
P( 0), P( 1), P( 2), P( 3), P( 4), P( 5), P( 6), P( 7),
}
}
+///////////////////////////////////////////////////////////////////////
+// Device statistics (Log 0x04)
+
+// See Section A.5 of
+// ATA/ATAPI Command Set - 3 (ACS-3)
+// T13/2161-D Revision 2, February 21, 2012.
+
+struct devstat_entry_info
+{
+ short size; // #bytes of value, -1 for signed char
+ const char * name;
+};
+
+const devstat_entry_info devstat_info_0x00[] = {
+ { 2, "List of supported log pages" },
+ { 0, 0 }
+};
+
+const devstat_entry_info devstat_info_0x01[] = {
+ { 2, "General Statistics" },
+ { 4, "Lifetime Power-On Resets" },
+ { 4, "Power-on Hours" }, // spec says no flags(?)
+ { 6, "Logical Sectors Written" },
+ { 6, "Number of Write Commands" },
+ { 6, "Logical Sectors Read" },
+ { 6, "Number of Read Commands" },
+ { 6, "Date and Time TimeStamp" }, // ACS-3
+ { 0, 0 }
+};
+
+const devstat_entry_info devstat_info_0x02[] = {
+ { 2, "Free-Fall Statistics" },
+ { 4, "Number of Free-Fall Events Detected" },
+ { 4, "Overlimit Shock Events" },
+ { 0, 0 }
+};
+
+const devstat_entry_info devstat_info_0x03[] = {
+ { 2, "Rotating Media Statistics" },
+ { 4, "Spindle Motor Power-on Hours" },
+ { 4, "Head Flying Hours" },
+ { 4, "Head Load Events" },
+ { 4, "Number of Reallocated Logical Sectors" },
+ { 4, "Read Recovery Attempts" },
+ { 4, "Number of Mechanical Start Failures" },
+ { 4, "Number of Realloc. Candidate Logical Sectors" }, // ACS-3
+ { 0, 0 }
+};
+
+const devstat_entry_info devstat_info_0x04[] = {
+ { 2, "General Errors Statistics" },
+ { 4, "Number of Reported Uncorrectable Errors" },
+//{ 4, "Number of Resets Between Command Acceptance and Command Completion" },
+ { 4, "Resets Between Cmd Acceptance and Completion" },
+ { 0, 0 }
+};
+
+const devstat_entry_info devstat_info_0x05[] = {
+ { 2, "Temperature Statistics" },
+ { -1, "Current Temperature" },
+ { -1, "Average Short Term Temperature" },
+ { -1, "Average Long Term Temperature" },
+ { -1, "Highest Temperature" },
+ { -1, "Lowest Temperature" },
+ { -1, "Highest Average Short Term Temperature" },
+ { -1, "Lowest Average Short Term Temperature" },
+ { -1, "Highest Average Long Term Temperature" },
+ { -1, "Lowest Average Long Term Temperature" },
+ { 4, "Time in Over-Temperature" },
+ { -1, "Specified Maximum Operating Temperature" },
+ { 4, "Time in Under-Temperature" },
+ { -1, "Specified Minimum Operating Temperature" },
+ { 0, 0 }
+};
+
+const devstat_entry_info devstat_info_0x06[] = {
+ { 2, "Transport Statistics" },
+ { 4, "Number of Hardware Resets" },
+ { 4, "Number of ASR Events" },
+ { 4, "Number of Interface CRC Errors" },
+ { 0, 0 }
+};
+
+const devstat_entry_info devstat_info_0x07[] = {
+ { 2, "Solid State Device Statistics" },
+ { 1, "Percentage Used Endurance Indicator" },
+ { 0, 0 }
+};
+
+const devstat_entry_info * devstat_infos[] = {
+ devstat_info_0x00,
+ devstat_info_0x01,
+ devstat_info_0x02,
+ devstat_info_0x03,
+ devstat_info_0x04,
+ devstat_info_0x05,
+ devstat_info_0x06,
+ devstat_info_0x07
+};
+
+const int num_devstat_infos = sizeof(devstat_infos)/sizeof(devstat_infos[0]);
+
+static void print_device_statistics_page(const unsigned char * data, int page,
+ bool & need_trailer)
+{
+ const devstat_entry_info * info = (page < num_devstat_infos ? devstat_infos[page] : 0);
+ const char * name = (info ? info[0].name : "Unknown Statistics");
+
+ // Check page number in header
+ static const char line[] = " ===== = = == ";
+ if (!data[2]) {
+ pout("%3d%s%s (empty) ==\n", page, line, name);
+ return;
+ }
+ if (data[2] != page) {
+ pout("%3d%s%s (invalid page %d in header) ==\n", page, line, name, data[2]);
+ return;
+ }
+
+ pout("%3d%s%s (rev %d) ==\n", page, line, name, data[0]);
+
+ // Print entries
+ for (int i = 1, offset = 8; offset < 512-7; i++, offset+=8) {
+ // Check for last known entry
+ if (info && !info[i].size)
+ info = 0;
+
+ // Skip unsupported entries
+ unsigned char flags = data[offset+7];
+ if (!(flags & 0x80))
+ continue;
+
+ // Get value size, default to max if unknown
+ int size = (info ? info[i].size : 7);
+
+ // Format value
+ char valstr[32];
+ if (flags & 0x40) { // valid flag
+ // Get value
+ int64_t val;
+ if (size < 0) {
+ val = (signed char)data[offset];
+ }
+ else {
+ val = 0;
+ for (int j = 0; j < size; j++)
+ val |= (int64_t)data[offset+j] << (j*8);
+ }
+ snprintf(valstr, sizeof(valstr), "%"PRId64, val);
+ }
+ else {
+ // Value not known (yet)
+ strcpy(valstr, "-");
+ }
+
+ pout("%3d 0x%03x %d%c %15s%c %s\n",
+ page, offset,
+ abs(size),
+ (flags & 0x1f ? '+' : ' '), // unknown flags
+ valstr,
+ (flags & 0x20 ? '~' : ' '), // normalized flag
+ (info ? info[i].name : "Unknown"));
+ if (flags & 0x20)
+ need_trailer = true;
+ }
+}
+
+static bool print_device_statistics(ata_device * device, unsigned nsectors,
+ const std::vector<int> & single_pages, bool all_pages, bool ssd_page)
+{
+ // Read list of supported pages from page 0
+ unsigned char page_0[512] = {0, };
+ if (!ataReadLogExt(device, 0x04, 0, 0, page_0, 1))
+ return false;
+
+ unsigned char nentries = page_0[8];
+ if (!(page_0[2] == 0 && nentries > 0)) {
+ pout("Device Statistics page 0 is invalid (page=%d, nentries=%d)\n", page_0[2], nentries);
+ return false;
+ }
+
+ // Prepare list of pages to print
+ std::vector<int> pages;
+ unsigned i;
+ if (all_pages) {
+ // Add all supported pages
+ for (i = 0; i < nentries; i++) {
+ int page = page_0[8+1+i];
+ if (page)
+ pages.push_back(page);
+ }
+ ssd_page = false;
+ }
+ // Add manually specified pages
+ bool print_page_0 = false;
+ for (i = 0; i < single_pages.size() || ssd_page; i++) {
+ int page = (i < single_pages.size() ? single_pages[i] : 7);
+ if (!page)
+ print_page_0 = true;
+ else if (page >= (int)nsectors)
+ pout("Device Statistics Log has only %u pages\n", nsectors);
+ else
+ pages.push_back(page);
+ if (page == 7)
+ ssd_page = false;
+ }
+
+ // Print list of supported pages if requested
+ if (print_page_0) {
+ pout("Device Statistics (GP Log 0x04) supported pages\n");
+ pout("Page Description\n");
+ for (i = 0; i < nentries; i++) {
+ int page = page_0[8+1+i];
+ pout("%3d %s\n", page,
+ (page < num_devstat_infos ? devstat_infos[page][0].name : "Unknown Statistics"));
+ }
+ pout("\n");
+ }
+
+ // Read & print pages
+ if (!pages.empty()) {
+ pout("Device Statistics (GP Log 0x04)\n");
+ pout("Page Offset Size Value Description\n");
+ bool need_trailer = false;
+
+ for (i = 0; i < pages.size(); i++) {
+ int page = pages[i];
+ unsigned char page_n[512] = {0, };
+ if (!ataReadLogExt(device, 0x04, 0, page, page_n, 1))
+ return false;
+ print_device_statistics_page(page_n, page, need_trailer);
+ }
+
+ if (need_trailer)
+ pout("%30s|_ ~ normalized value\n", "");
+ pout("\n");
+ }
+
+ return true;
+}
+
+
+///////////////////////////////////////////////////////////////////////
+
// Print log 0x11
static void PrintSataPhyEventCounters(const unsigned char * data, bool reset)
{
pout("Device State: %s (%u)\n",
sct_device_state_msg(sts->device_state), sts->device_state);
char buf1[20], buf2[20];
- if ( !sts->min_temp && !sts->life_min_temp && !sts->byte205
- && !sts->under_limit_count && !sts->over_limit_count ) {
+ if ( !sts->min_temp && !sts->life_min_temp
+ && !sts->under_limit_count && !sts->over_limit_count) {
// "Reserved" fields not set, assume "old" format version 2
- // Table 11 of T13/1701DT Revision 5
- // Table 54 of T13/1699-D Revision 3e
+ // Table 11 of T13/1701DT-N (SMART Command Transport) Revision 5, February 2005
+ // Table 54 of T13/1699-D (ATA8-ACS) Revision 3e, July 2006
pout("Current Temperature: %s Celsius\n",
sct_ptemp(sts->hda_temp, buf1));
pout("Power Cycle Max Temperature: %s Celsius\n",
}
else {
// Assume "new" format version 2 or version 3
- // T13/e06152r0-3 (Additional SCT Temperature Statistics)
- // Table 60 of T13/1699-D Revision 3f
+ // T13/e06152r0-3 (Additional SCT Temperature Statistics), August - October 2006
+ // Table 60 of T13/1699-D (ATA8-ACS) Revision 3f, December 2006 (format version 2)
+ // Table 80 of T13/1699-D (ATA8-ACS) Revision 6a, September 2008 (format version 3)
pout("Current Temperature: %s Celsius\n",
sct_ptemp(sts->hda_temp, buf1));
pout("Power Cycle Min/Max Temperature: %s/%s Celsius\n",
sct_ptemp(sts->min_temp, buf1), sct_ptemp(sts->max_temp, buf2));
pout("Lifetime Min/Max Temperature: %s/%s Celsius\n",
sct_ptemp(sts->life_min_temp, buf1), sct_ptemp(sts->life_max_temp, buf2));
- if (sts->byte205) // e06152r0-2, removed in e06152r3
- pout("Lifetime Average Temperature: %s Celsius\n",
- sct_ptemp((signed char)sts->byte205, buf1));
+ signed char avg = sts->byte205; // Average Temperature from e06152r0-2, removed in e06152r3
+ if (0 < avg && sts->life_min_temp <= avg && avg <= sts->life_max_temp)
+ pout("Lifetime Average Temperature: %2d Celsius\n", avg);
pout("Under/Over Temperature Limit Count: %2u/%u\n",
sts->under_limit_count, sts->over_limit_count);
}
pout(" Write: %6d (%0.1f seconds)\n", write_timer, write_timer/10.0);
}
+static void print_aam_level(const char * msg, int level, int recommended = -1)
+{
+ // Table 56 of T13/1699-D (ATA8-ACS) Revision 6a, September 6, 2008
+ // Obsolete since T13/2015-D (ACS-2) Revision 4a, December 9, 2010
+ const char * s;
+ if (level == 0)
+ s = "vendor specific";
+ else if (level < 128)
+ s = "unknown/retired";
+ else if (level == 128)
+ s = "quiet";
+ else if (level < 254)
+ s = "intermediate";
+ else if (level == 254)
+ s = "maximum performance";
+ else
+ s = "reserved";
+
+ if (recommended >= 0)
+ pout("%s%d (%s), recommended: %d\n", msg, level, s, recommended);
+ else
+ pout("%s%d (%s)\n", msg, level, s);
+}
+
+static void print_apm_level(const char * msg, int level)
+{
+ // Table 120 of T13/2015-D (ACS-2) Revision 7, June 22, 2011
+ const char * s;
+ if (!(1 <= level && level <= 254))
+ s = "reserved";
+ else if (level == 1)
+ s = "minimum power consumption with standby";
+ else if (level < 128)
+ s = "intermediate level with standby";
+ else if (level == 128)
+ s = "minimum power consumption without standby";
+ else if (level < 254)
+ s = "intermediate level without standby";
+ else
+ s = "maximum performance";
+
+ pout("%s%d (%s)\n", msg, level, s);
+}
+
+static void print_ata_security_status(const char * msg, unsigned short state)
+{
+ const char * s1, * s2 = "", * s3 = "", * s4 = "";
+
+ // Table 6 of T13/2015-D (ACS-2) Revision 7, June 22, 2011
+ if (!(state & 0x0001))
+ s1 = "Unavailable";
+ else if (!(state & 0x0002)) {
+ s1 = "Disabled, ";
+ if (!(state & 0x0008))
+ s2 = "NOT FROZEN [SEC1]";
+ else
+ s2 = "frozen [SEC2]";
+ }
+ else {
+ s1 = "ENABLED, PW level ";
+ if (!(state & 0x0020))
+ s2 = "HIGH";
+ else
+ s2 = "MAX";
+
+ if (!(state & 0x0004)) {
+ s3 = ", not locked, ";
+ if (!(state & 0x0008))
+ s4 = "not frozen [SEC5]";
+ else
+ s4 = "frozen [SEC6]";
+ }
+ else {
+ s3 = ", **LOCKED** [SEC4]";
+ if (state & 0x0010)
+ s4 = ", PW ATTEMPTS EXCEEDED";
+ }
+ }
+
+ pout("%s%s%s%s%s\n", msg, s1, s2, s3, s4);
+}
+
+static void print_standby_timer(const char * msg, int timer, const ata_identify_device & drive)
+{
+ const char * s1 = 0;
+ int hours = 0, minutes = 0 , seconds = 0;
+
+ // Table 63 of T13/2015-D (ACS-2) Revision 7, June 22, 2011
+ if (timer == 0)
+ s1 = "disabled";
+ else if (timer <= 240)
+ seconds = timer * 5, minutes = seconds / 60, seconds %= 60;
+ else if (timer <= 251)
+ minutes = (timer - 240) * 30, hours = minutes / 60, minutes %= 60;
+ else if (timer == 252)
+ minutes = 21;
+ else if (timer == 253)
+ s1 = "between 8 hours and 12 hours";
+ else if (timer == 255)
+ minutes = 21, seconds = 15;
+ else
+ s1 = "reserved";
+
+ const char * s2 = "", * s3 = "";
+ if (!(drive.words047_079[49-47] & 0x2000))
+ s2 = " or vendor-specific";
+ if (timer > 0 && (drive.words047_079[50-47] & 0xc001) == 0x4001)
+ s3 = ", a vendor-specific minimum applies";
+
+ if (s1)
+ pout("%s%d (%s%s%s)\n", msg, timer, s1, s2, s3);
+ else
+ pout("%s%d (%02d:%02d:%02d%s%s)\n", msg, timer, hours, minutes, seconds, s2, s3);
+}
+
int ataPrintMain (ata_device * device, const ata_print_options & options)
{
int powermode = ataCheckPowerMode(device);
switch (powermode) {
case -1:
- if (errno == ENOSYS) {
+ if (device->is_syscall_unsup()) {
pout("CHECK POWER MODE not implemented, ignoring -n option\n"); break;
}
powername = "SLEEP"; powerlimit = 2;
|| options.smart_ext_error_log
|| options.smart_ext_selftest_log
|| options.sataphy
+ || options.devstat_all_pages
+ || options.devstat_ssd_page
+ || !options.devstat_pages.empty()
);
unsigned i;
// Exit if no further options specified
if (!( options.drive_info || need_smart_support
|| need_smart_logdir || need_gp_logdir
- || need_sct_support )) {
+ || need_sct_support || options.get_set_used)) {
if (powername)
pout("Device is in %s mode\n", powername);
else
// Start by getting Drive ID information. We need this, to know if SMART is supported.
int returnval = 0;
ata_identify_device drive; memset(&drive, 0, sizeof(drive));
+ device->clear_err();
int retid = ata_read_identity(device, &drive, options.fix_swapped_id);
if (retid < 0) {
- pout("Smartctl: Device Read Identity Failed (not an ATA/ATAPI device)\n\n");
+ pout("Smartctl: Device Read Identity Failed: %s\n\n",
+ (device->get_errno() ? device->get_errmsg() : "Unknown error"));
+ failuretest(MANDATORY_CMD, returnval|=FAILID);
+ }
+ else if (!nonempty(&drive, sizeof(drive))) {
+ pout("Smartctl: Device Read Identity Failed: empty IDENTIFY data\n\n");
failuretest(MANDATORY_CMD, returnval|=FAILID);
}
dbentry = lookup_drive_apply_presets(&drive, attribute_defs,
fix_firmwarebug);
+ // Get capacity and sector sizes
+ ata_size_info sizes;
+ ata_get_size_info(&drive, sizes);
+
// Print most drive identity information if requested
if (options.drive_info) {
pout("=== START OF INFORMATION SECTION ===\n");
- print_drive_info(&drive, dbentry);
+ print_drive_info(&drive, sizes, dbentry);
}
// Check and print SMART support and state
}
}
+ // Print AAM status
+ if (options.get_aam) {
+ if ((drive.command_set_2 & 0xc200) != 0x4200) // word083
+ pout("AAM feature is: Unavailable\n");
+ else if (!(drive.word086 & 0x0200))
+ pout("AAM feature is: Disabled\n");
+ else
+ print_aam_level("AAM level is: ", drive.words088_255[94-88] & 0xff,
+ drive.words088_255[94-88] >> 8);
+ }
+
+ // Print APM status
+ if (options.get_apm) {
+ if ((drive.command_set_2 & 0xc008) != 0x4008) // word083
+ pout("APM feature is: Unavailable\n");
+ else if (!(drive.word086 & 0x0008))
+ pout("APM feature is: Disabled\n");
+ else
+ print_apm_level("APM level is: ", drive.words088_255[91-88] & 0xff);
+ }
+
+ // Print read look-ahead status
+ if (options.get_lookahead) {
+ pout("Rd look-ahead is: %s\n",
+ ( (drive.command_set_2 & 0xc000) != 0x4000 // word083
+ || !(drive.command_set_1 & 0x0040)) ? "Unavailable" : // word082
+ !(drive.cfs_enable_1 & 0x0040) ? "Disabled" : "Enabled"); // word085
+ }
+
+ // Print write cache status
+ if (options.get_wcache) {
+ pout("Write cache is: %s\n",
+ ( (drive.command_set_2 & 0xc000) != 0x4000 // word083
+ || !(drive.command_set_1 & 0x0020)) ? "Unavailable" : // word082
+ !(drive.cfs_enable_1 & 0x0020) ? "Disabled" : "Enabled"); // word085
+ }
+
+ // Print ATA security status
+ if (options.get_security)
+ print_ata_security_status("ATA Security is: ", drive.words088_255[128-88]);
+
// Print remaining drive info
if (options.drive_info) {
// Print the (now possibly changed) power mode if available
|| options.smart_auto_offl_disable || options.smart_auto_offl_enable)
pout("=== START OF ENABLE/DISABLE COMMANDS SECTION ===\n");
+ // Enable/Disable AAM
+ if (options.set_aam) {
+ if (options.set_aam > 0) {
+ if (!ata_set_features(device, ATA_ENABLE_AAM, options.set_aam-1)) {
+ pout("AAM enable failed: %s\n", device->get_errmsg());
+ returnval |= FAILSMART;
+ }
+ else
+ print_aam_level("AAM set to level ", options.set_aam-1);
+ }
+ else {
+ if (!ata_set_features(device, ATA_DISABLE_AAM)) {
+ pout("AAM disable failed: %s\n", device->get_errmsg());
+ returnval |= FAILSMART;
+ }
+ else
+ pout("AAM disabled\n");
+ }
+ }
+
+ // Enable/Disable APM
+ if (options.set_apm) {
+ if (options.set_apm > 0) {
+ if (!ata_set_features(device, ATA_ENABLE_APM, options.set_apm-1)) {
+ pout("APM enable failed: %s\n", device->get_errmsg());
+ returnval |= FAILSMART;
+ }
+ else
+ print_apm_level("APM set to level ", options.set_apm-1);
+ }
+ else {
+ if (!ata_set_features(device, ATA_DISABLE_APM)) {
+ pout("APM disable failed: %s\n", device->get_errmsg());
+ returnval |= FAILSMART;
+ }
+ else
+ pout("APM disabled\n");
+ }
+ }
+
+ // Enable/Disable read look-ahead
+ if (options.set_lookahead) {
+ bool enable = (options.set_lookahead > 0);
+ if (!ata_set_features(device, (enable ? ATA_ENABLE_READ_LOOK_AHEAD : ATA_DISABLE_READ_LOOK_AHEAD))) {
+ pout("Read look-ahead %sable failed: %s\n", (enable ? "en" : "dis"), device->get_errmsg());
+ returnval |= FAILSMART;
+ }
+ else
+ pout("Read look-ahead %sabled\n", (enable ? "en" : "dis"));
+ }
+
+ // Enable/Disable write cache
+ if (options.set_wcache) {
+ bool enable = (options.set_wcache > 0);
+ if (!ata_set_features(device, (enable ? ATA_ENABLE_WRITE_CACHE : ATA_DISABLE_WRITE_CACHE))) {
+ pout("Write cache %sable failed: %s\n", (enable ? "en" : "dis"), device->get_errmsg());
+ returnval |= FAILSMART;
+ }
+ else
+ pout("Write cache %sabled\n", (enable ? "en" : "dis"));
+ }
+
+ // Freeze ATA security
+ if (options.set_security_freeze) {
+ if (!ata_nodata_command(device, ATA_SECURITY_FREEZE_LOCK)) {
+ pout("ATA SECURITY FREEZE LOCK failed: %s\n", device->get_errmsg());
+ returnval |= FAILSMART;
+ }
+ else
+ pout("ATA Security set to frozen mode\n");
+ }
+
+ // Set standby timer
+ if (options.set_standby) {
+ if (!ata_nodata_command(device, ATA_IDLE, options.set_standby-1)) {
+ pout("ATA IDLE command failed: %s\n", device->get_errmsg());
+ returnval |= FAILSMART;
+ }
+ else
+ print_standby_timer("Standby timer set to ", options.set_standby-1, drive);
+ }
+
// Enable/Disable SMART commands
if (options.smart_enable) {
if (ataEnableSmart(device)) {
else {
print_on();
pout("Please note the following marginal Attributes:\n");
- PrintSmartAttribWithThres(&smartval, &smartthres, attribute_defs, 2);
+ PrintSmartAttribWithThres(&smartval, &smartthres, attribute_defs, 2, options.output_format);
}
returnval|=FAILAGE;
}
else {
print_on();
pout("Failed Attributes:\n");
- PrintSmartAttribWithThres(&smartval, &smartthres, attribute_defs, 1);
+ PrintSmartAttribWithThres(&smartval, &smartthres, attribute_defs, 1, options.output_format);
}
}
else
else {
print_on();
pout("Failed Attributes:\n");
- PrintSmartAttribWithThres(&smartval, &smartthres, attribute_defs, 1);
+ PrintSmartAttribWithThres(&smartval, &smartthres, attribute_defs, 1, options.output_format);
}
}
else {
else {
print_on();
pout("Please note the following marginal Attributes:\n");
- PrintSmartAttribWithThres(&smartval, &smartthres, attribute_defs, 2);
+ PrintSmartAttribWithThres(&smartval, &smartthres, attribute_defs, 2, options.output_format);
}
returnval|=FAILAGE;
}
if (smart_val_ok && options.smart_vendor_attrib) {
print_on();
PrintSmartAttribWithThres(&smartval, &smartthres, attribute_defs,
- (printing_is_switchable ? 2 : 0));
+ (printing_is_switchable ? 2 : 0), options.output_format);
print_off();
}
}
}
+ // Print Device Statistics
+ if (options.devstat_all_pages || options.devstat_ssd_page || !options.devstat_pages.empty()) {
+ unsigned nsectors = GetNumLogSectors(gplogdir, 0x04, true);
+ if (!nsectors)
+ pout("Device Statistics (GP Log 0x04) not supported\n");
+ else if (!print_device_statistics(device, nsectors, options.devstat_pages,
+ options.devstat_all_pages, options.devstat_ssd_page))
+ failuretest(OPTIONAL_CMD, returnval|=FAILSMART);
+ }
+
// Print SATA Phy Event Counters
if (options.sataphy) {
unsigned nsectors = GetNumLogSectors(gplogdir, 0x11, true);
}
}
+ // Set to standby (spindown) mode
+ // (Above commands may spinup drive)
+ if (options.set_standby_now) {
+ if (!ata_nodata_command(device, ATA_STANDBY_IMMEDIATE)) {
+ pout("ATA STANDBY IMMEDIATE command failed: %s\n", device->get_errmsg());
+ returnval |= FAILSMART;
+ }
+ else
+ pout("Device placed in STANDBY mode\n");
+ }
+
// START OF THE TESTING SECTION OF THE CODE. IF NO TESTING, RETURN
if (!smart_val_ok || options.smart_selftest_type == -1)
return returnval;
// Now do the test. Note ataSmartTest prints its own error/success
// messages
- if (ataSmartTest(device, options.smart_selftest_type, options.smart_selective_args,
- &smartval, get_num_sectors(&drive) ))
+ if (ataSmartTest(device, options.smart_selftest_type, options.smart_selftest_force,
+ options.smart_selective_args, &smartval, sizes.sectors ))
failuretest(OPTIONAL_CMD, returnval|=FAILSMART);
else {
// Tell user how long test will take to complete. This is tricky