#!/bin/sh
-# $Id: autogen.sh 4053 2015-04-14 20:18:50Z chrfranke $
+# $Id: autogen.sh 4115 2015-07-15 20:52:26Z chrfranke $
#
-# Generate ./configure from config.in and Makefile.in from Makefile.am.
+# Generate ./configure from configure.ac and Makefile.in from Makefile.am.
# This also adds files like missing,depcomp,install-sh to the source
# directory. To update these files at a later date use:
# autoreconf -f -i -v
rm -f dostest.tmp
}
-typep()
-{
- cmd=$1 ; TMP=$IFS ; IFS=: ; set $PATH
- for dir
- do
- if [ -x "$dir/$cmd" ]; then
- echo "$dir/$cmd"
- IFS=$TMP
- return 0
- fi
- done
- IFS=$TMP
- return 1
-}
+# Find automake
+if [ -n "$AUTOMAKE" ]; then
+ ver=$("$AUTOMAKE" --version) || exit 1
+else
+ maxver=
+ for v in 1.15 1.14 1.13 1.12 1.11 1.10; do
+ minver=$v; test -n "$maxver" || maxver=$v
+ ver=$(automake-$v --version 2>/dev/null) || continue
+ AUTOMAKE="automake-$v"
+ break
+ done
+ if [ -z "$AUTOMAKE" ]; then
+ echo "GNU Automake $minver (up to $maxver) is required to bootstrap smartmontools from SVN."
+ exit 1;
+ fi
+fi
-test -x "$AUTOMAKE" ||
- AUTOMAKE=`typep automake-1.15` || AUTOMAKE=`typep automake-1.14` ||
- AUTOMAKE=`typep automake-1.13` || AUTOMAKE=`typep automake-1.12` ||
- AUTOMAKE=`typep automake-1.11` || AUTOMAKE=`typep automake-1.10` ||
- AUTOMAKE=`typep automake-1.9` || AUTOMAKE=`typep automake-1.8` ||
- AUTOMAKE=`typep automake-1.7` || AUTOMAKE=`typep automake17` ||
-{
-echo
-echo "You must have at least GNU Automake 1.7 (up to 1.15) installed"
-echo "in order to bootstrap smartmontools from SVN. Download the"
-echo "appropriate package for your distribution, or the source tarball"
-echo "from ftp://ftp.gnu.org/gnu/automake/ ."
-echo
-echo "Also note that support for new Automake series (anything newer"
-echo "than 1.15) is only added after extensive tests. If you live in"
-echo "the bleeding edge, you should know what you're doing, mainly how"
-echo "to test it before the developers. Be patient."
-exit 1;
-}
+ver=$(echo "$ver" | sed -n '1s,^.*[^.0-9]\([12]\.[0-9][-.0-9pl]*\).*$,\1,p')
+if [ -z "$ver" ]; then
+ echo "$AUTOMAKE: Unable to determine automake version."
+ exit 1
+fi
-test -x "$ACLOCAL" || ACLOCAL="aclocal`echo "$AUTOMAKE" | sed 's/.*automake//'`" && ACLOCAL=`typep "$ACLOCAL"` ||
-{
-echo
-echo "autogen.sh found automake-1.X, but not the respective aclocal-1.X."
-echo "Your installation of GNU Automake is broken or incomplete."
-exit 2;
-}
+# Check aclocal
+if [ -z "$ACLOCAL" ]; then
+ ACLOCAL="aclocal$(echo "$AUTOMAKE" | sed -n 's,^.*automake\(-[.0-9]*\),\1,p')"
+fi
-# Detect Automake version
-case "$AUTOMAKE" in
- *automake-1.7|*automake17)
- ver=1.7 ;;
- *automake-1.8)
- ver=1.8 ;;
- *)
- ver="`$AUTOMAKE --version | sed -n '1s,^.*[^.0-9]\([12]\.[0-9][-.0-9pl]*\).*$,\1,p'`"
- ver="${ver:-?.?.?}"
-esac
+"$ACLOCAL" --version >/dev/null || exit 1
-# Warn if Automake version was not tested or does not support filesystem
+# Warn if Automake version was not tested
amwarnings=$warnings
case "$ver" in
- 1.[78]|1.[78].*)
- # Check for case sensitive filesystem
- # (to avoid e.g. "DIST_COMMON = ... ChangeLog ..." in Makefile.in on Cygwin)
- rm -f CASETEST.TMP
- echo > casetest.tmp
- test -f CASETEST.TMP &&
- {
- echo "Warning: GNU Automake version ${ver} does not properly handle case"
- echo "insensitive filesystems. Some make targets may not work."
- }
- rm -f casetest.tmp
- ;;
-
- 1.9.[1-6]|1.10|1.10.[123]|1.11|1.11.[1-6]|1.12.[2-6]|1.13.[34])
+ 1.10|1.10.[123]|1.11|1.11.[1-6]|1.12.[2-6]|1.13.[34])
# OK
;;
echo "Please report success/failure to the smartmontools-support mailing list."
esac
-# Warn if Automake version is too old
-case "$ver" in
- 1.[789]|1.[789].*)
- echo "WARNING:"
- echo "The use of GNU Automake version $ver is deprecated. Support for Automake"
- echo "versions 1.7 - 1.9.x will be removed in a future release of smartmontools."
-esac
-
-# Install pkg-config macros
-# (Don't use 'aclocal -I m4 --install' to keep support for automake < 1.10)
+# required for aclocal-1.10 --install
test -d m4 || mkdir m4 || exit 1
-test -z "$force" || rm -f m4/pkg.m4
-test -f m4/pkg.m4 || acdir=`${ACLOCAL} --print-ac-dir` &&
- test -n "$acdir" && test -f "$acdir/pkg.m4" &&
-{
- echo "$0: installing \`m4/pkg.m4' from \`$acdir/pkg.m4'"
- cp "$acdir/pkg.m4" m4/pkg.m4
-}
-test -f m4/pkg.m4 ||
- echo "Warning: cannot install m4/pkg.m4, 'make dist' and systemd detection will not work."
set -e # stops on error status
test -z "$warnings" || set -x
-${ACLOCAL} -I m4 $force $warnings
+${ACLOCAL} -I m4 --install $force $warnings
autoheader $force $warnings
${AUTOMAKE} --add-missing --copy ${force:+--force-missing} $amwarnings
autoconf $force $warnings
projects / mirror_smartmontools-debian.git / blobdiff