.ig
-Copyright (C) 2002-10 Bruce Allen <smartmontools-support@lists.sourceforge.net>
-Copyright (C) 2004-14 Christian Franke <smartmontools-support@lists.sourceforge.net>
+Copyright (C) 2002-10 Bruce Allen
+Copyright (C) 2004-16 Christian Franke
-$Id: smartctl.8.in 3965 2014-07-20 14:46:41Z chrfranke $
+$Id: smartctl.8.in 4311 2016-04-27 21:03:01Z chrfranke $
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
California, Santa Cruz. http://ssrc.soe.ucsc.edu/
..
-.TH SMARTCTL 8 CURRENT_SVN_DATE CURRENT_SVN_VERSION CURRENT_SVN_DATE
+.TH SMARTCTL 8 "CURRENT_SVN_DATE" "CURRENT_SVN_VERSION" "SMART Monitoring Tools"
.SH NAME
\fBsmartctl\fP \- Control and Monitor Utility for SMART Disks
.SH SYNOPSIS
.B smartctl [options] device
-.SH PACKAGE VERSION
-CURRENT_SVN_VERSION CURRENT_SVN_DATE CURRENT_SVN_REV
-
.SH DESCRIPTION
.\" %IF NOT OS ALL
.\"! [This man page is generated for the OS_MAN_FILTER version of smartmontools.
and SAT" below). Device paths are as follows:
.\" %IF OS Linux
.IP \fBLINUX\fP: 9
-Use the forms \fB"/dev/hd[a\-t]"\fP for IDE/ATA devices, and
-\fB"/dev/sd[a\-z]"\fP for SCSI devices. For SCSI Tape Drives and
-Changers with TapeAlert support use the devices \fB"/dev/nst*"\fP and
-\fB"/dev/sg*"\fP. For SATA disks accessed with libata, use
-\fB"/dev/sd[a\-z]"\fP and append \fB"\-d ata"\fP. For disks behind
+Use the forms \fB"/dev/sd[a\-z]"\fP for ATA/SATA and SCSI/SAS devices.
+For SCSI Tape Drives and Changers with TapeAlert support use the
+devices \fB"/dev/nst*"\fP and \fB"/dev/sg*"\fP. For disks behind
3ware controllers you may need \fB"/dev/sd[a\-z]"\fP or
\fB"/dev/twe[0\-9]"\fP, \fB"/dev/twa[0\-9]"\fP or \fB"/dev/twl[0\-9]"\fP: see details
below. For disks behind HighPoint RocketRAID controllers you may need
("lsscsi \-g" is helpful in determining which scsi generic device node corresponds
to which device.) Use the nodes corresponding to the RAID controllers,
not the nodes corresponding to logical drives. See the \fB\-d\fP option below, as well.
+Use the forms \fB"/dev/nvme[0\-9]"\fP (broadcast namespace) or
+\fB"/dev/nvme[0\-9]n[1\-9]"\fP (specific namespace 1\-9) for NVMe devices.
.\" %ENDIF OS Linux
.\" %IF OS Darwin
.IP \fBDARWIN\fP: 9
\fB"/dev/csmi[0\-9],N"\fP where N specifies the port behind the logical
scsi controller "\\\\.\\Scsi[0\-9]:".
-[NEW EXPERIMENTAL SMARTCTL FEATURE] For SATA or SAS disks behind an Areca
-controller use \fB"/dev/arcmsr[0\-9]"\fP, see \'\-d areca,N[/E]\' below.
+For SATA or SAS disks behind an Areca controller use
+\fB"/dev/arcmsr[0\-9]"\fP, see \'\-d areca,N[/E]\' below.
+
+[NEW EXPERIMENTAL SMARTCTL FEATURE]
+Use the forms \fB"/dev/nvme[0\-9]"\fP (broadcast namespace) or
+\fB"/dev/nvme[0\-9]n[1\-9]"\fP (specific namespace 1\-9) for first,
+second, ..., NVMe device.
+Alternatively use the forms \fB"/dev/nvmes[0\-9][n[1\-9]]"\fP for NVMe devices
+behind the logical scsi controller "\\\\.\\Scsi[0\-9]:".
The prefix \fB"/dev/"\fP is optional.
.\" %ENDIF OS Windows Cygwin
in the smartmontools database (see \'\-v\' options below). If so, the
drive model family may also be printed. If \'\-n\' (see below) is
specified, the power mode of the drive is printed.
+.\" %IF OS FreeBSD Linux Windows Cygwin
+
+[NVMe] [FreeBSD, Linux, Windows and Cygwin only]
+[NEW EXPERIMENTAL SMARTCTL FEATURE]
+For NVMe devices the information is obtained from the Identify Controller
+and the Identify Namespace data structure.
+.\" %ENDIF OS FreeBSD Linux Windows Cygwin
.TP
.B \-\-identify[=[w][nvb]]
[ATA only] Prints an annotated table of the IDENTIFY DEVICE data.
.nf
\'\-H \-i \-A \-l error \-l selftest\'.
.fi
+.\" %IF OS FreeBSD Linux Windows Cygwin
+For NVMe, this is equivalent to
+.nf
+\'\-H \-i \-c \-A \-l error'.
+.fi
+.\" %ENDIF OS FreeBSD Linux Windows Cygwin
Note that for ATA disks this does \fBnot\fP enable the non-SMART options
and the SMART options which require support for 48-bit ATA commands.
.TP
.nf
\'\-H \-i \-A \-l error \-l selftest \-l background \-l sasphy\'.
.fi
+.\" %IF OS FreeBSD Linux Windows Cygwin
+For NVMe, this is equivalent to
+.nf
+\'\-H \-i \-c \-A \-l error'.
+.fi
+.\" %ENDIF OS FreeBSD Linux Windows Cygwin
.TP
.B \-\-scan
Scans for devices and prints each device name, device type and protocol
.nf
smartctl \-\-scan\-open \-\- \-a \-W 4,45,50 \-m admin@work > smartd.conf
.fi
+
+[NEW EXPERIMENTAL SMARTCTL FEATURE]
+Multiple \'\-d TYPE\' options may be specified with \'\-\-scan[\-open]\'
+to combine the scan results of more than one TYPE.
.TP
.B \-g NAME, \-\-get=NAME
Get non-SMART device settings. See \'\-s, \-\-set\' below for further info.
.I silent
\- print no output. The only way to learn about what was found is to
-use the exit status of \fBsmartctl\fP (see RETURN VALUES below).
+use the exit status of \fBsmartctl\fP (see EXIT STATUS below).
.I noserial
\- Do not print the serial number of the device.
\fBsmartctl\fP
from issuing ATA commands to a SCSI device.
+.\" %ENDIF NOT OS Darwin
+.\" %IF OS FreeBSD Linux Windows Cygwin
+.I nvme[,NSID]
+\- [FreeBSD, Linux, Windows and Cygwin only]
+[NEW EXPERIMENTAL SMARTCTL FEATURE]
+the device type is NVM Express (NVMe).
+The optional parameter NSID specifies the namespace id (in hex) passed
+to the driver.
+Use 0xffffffff for the broadcast namespace id.
+The default for NSID is the namespace id addressed by the device name.
+
+.\" %ENDIF OS FreeBSD Linux Windows Cygwin
+.\" %IF NOT OS Darwin
.I sat[,auto][,N]
\- the device type is SCSI to ATA Translation (SAT).
This is for ATA disks that have a SCSI to ATA Translation (SAT) Layer
in I/O errors and may disconnect the drive. The same applies if the specified
PORT does not exist or is not connected to a disk.
-[NEW EXPERIMENTAL SMARTCTL FEATURE]
The Prolific PL2507/3507 USB bridges with older firmware support a pass-through
command similar to JMicron and work with \'\-d usbjmicron,0\'.
Newer Prolific firmware requires a modified command which can be selected by
\'\-d usbjmicron,p\'.
Note that this does not yet support the SMART status command.
+.I usbprolific
+\- [NEW EXPERIMENTAL SMARTCTL FEATURE]
+this device type is for SATA disks that are behind a Prolific PL2571/2771/2773/2775
+USB to SATA bridge.
+
.I usbsunplus
\- this device type is for SATA disks that are behind a SunplusIT USB to SATA
bridge.
.br
For PERC5/6 controllers: \fBmegaraid_sas_ioctlN\fP
+.\" %ENDIF OS Linux
+.\" %IF OS Linux Windows Cygwin
.I aacraid,H,L,ID
-\- [Linux only] [NEW EXPERIMENTAL SMARTCTL FEATURE]
+\- [Linux, Windows and Cygwin only] [NEW EXPERIMENTAL SMARTCTL FEATURE]
the device consists of one or more SCSI/SAS disks connected to an AacRaid controller.
The non-negative integers H,L,ID (Host number, Lun, ID) denote which disk
on the controller is monitored.
Use syntax such as:
.nf
-\fBsmartctl \-a \-d aacraid,0,0,66 /dev/sda\fP
+\fBsmartctl \-a \-d aacraid,0,0,2 /dev/sda\fP
.fi
.nf
-\fBsmartctl \-a \-d aacraid,0,0,66 /dev/sdb\fP
+\fBsmartctl \-a \-d aacraid,1,0,4 /dev/sdb\fP
.fi
-The L and ID numbers of a disk can be found in /proc/scsi/scsi
-The following entry in /proc/devices must exist: \fBaac\fP.
+.\" %ENDIF OS Linux Windows Cygwin
+.\" %IF OS Linux
+On Linux, the following entry in /proc/devices must exist: \fBaac\fP.
Character device nodes /dev/aacH (H=Host number) are created if required.
.\" %ENDIF OS Linux
+.\" %IF OS Windows Cygwin
+On Windows, the device name parameter /dev/sdX is ignored if \'-d aacraid\'
+is specified.
+
+.\" %ENDIF OS Windows Cygwin
.\" %IF OS FreeBSD Linux
.I 3ware,N
\- [FreeBSD and Linux only] the device consists of one or more ATA disks
.fi
.\" %ENDIF OS FreeBSD
.\" %IF OS Windows Cygwin
-[NEW EXPERIMENTAL SMARTCTL FEATURE] On Windows and Cygwin use syntax such as:
+On Windows and Cygwin use syntax such as:
.nf
\fBsmartctl \-a \-d areca,2 /dev/arcmsr0\fP
.fi
error messages and no SMART information.
.I areca,N/E
-\- [FreeBSD, Linux, Windows and Cygwin only] [NEW EXPERIMENTAL SMARTCTL FEATURE] the
-device consists of one or more SATA or SAS disks connected to an Areca SAS RAID controller.
+\- [FreeBSD, Linux, Windows and Cygwin only] the device consists of one
+or more SATA or SAS disks connected to an Areca SAS RAID controller.
The integer N (range 1 to 128) denotes the channel (slot) and E (range
1 to 8) denotes the enclosure.
Important: This requires Areca SAS controller firmware version 1.51 or later.
it a second time adds a hex listing of the first 64 bytes of data send to,
or received from the device.
+.\" %IF OS FreeBSD Linux Windows Cygwin
+.I nvmeioctl
+\- [FreeBSD, Linux, Windows and Cygwin only]
+[NEW EXPERIMENTAL SMARTCTL FEATURE]
+report only ioctl() transactions with NVMe devices.
+
+.\" %ENDIF OS FreeBSD Linux Windows Cygwin
Any argument may include a positive integer to specify the level of detail
that should be reported. The argument should be followed by a comma then
the integer with no spaces. For example,
checks when the device is in a low-power mode. It may be used to prevent
a disk from being spun-up by \fBsmartctl\fP. The power mode is ignored by
default. A nonzero exit status is returned if the device is in one of the
-specified low-power modes (see RETURN VALUES below).
+specified low-power modes (see EXIT STATUS below).
Note: If this option is used it may also be necessary to specify the device
type with the \'\-d\' option. Otherwise the device may spin up due to
The write cache is usually enabled by default.
.I wcache[,on|off]
-\- [SCSI] [NEW EXPERIMENTAL SMARTCTL FEATURE]
-Gets/sets the \'Write Cache Enable\' (WCE) bit (if supported).
+\- [SCSI] Gets/sets the \'Write Cache Enable\' (WCE) bit (if supported).
The write cache is usually enabled by default.
.I wcreorder[,on|off]
-\- [ATA only] [NEW EXPERIMENTAL SMARTCTL FEATURE]
-Gets/sets Write Cache Reordering.
+\- [ATA only] Gets/sets Write Cache Reordering.
If it is disabled (off), disk write scheduling is executed on a
first-in-first-out (FIFO) basis. If Write Cache Reordering is enabled (on),
then disk write scheduling may be reordered by the drive. If write cache is
commands.
.I rcache[,on|off]
-\- [SCSI only] [NEW EXPERIMENTAL SMARTCTL FEATURE]
-Gets/sets the \'Read Cache Disable\' (RCE) bit. \'Off\' value disables read cache
-(if supported).
+\- [SCSI only] Gets/sets the \'Read Cache Disable\' (RCE) bit.
+\'Off\' value disables read cache (if supported).
The read cache is usually enabled by default.
.TP
.B SMART READ AND DISPLAY DATA OPTIONS:
.TP
.B \-H, \-\-health
-Check: Ask the device to report its SMART health status or pending
-TapeAlert messages. SMART status is based on
-information that it has gathered from online and offline
-tests, which were used to determine/update its
-SMART vendor-specific Attribute values. TapeAlert status is obtained
-by reading the TapeAlert log page.
+Prints the health status of the device or pending TapeAlert messages.
If the device reports failing health status, this means
.B either
that it is predicting its own failure within the next 24 hours. If
this happens, use the \'\-a\' option to get more information, and
.B get your data off the disk and to someplace safe as soon as you can.
+
+[ATA] Health status is obtained by checking the (boolean) result returned
+by the SMART RETURN STATUS command.
+The return value of this ATA command may be unknown due to limitations or
+bugs in some layer (e.g. RAID controller or USB bridge firmware) between
+disk and operating system.
+In this case, \fBsmartctl\fP prints a warning and checks whether any
+Prefailure SMART Attribute value is less than or equal to its threshold
+(see \'\-A\' below).
+
+[SCSI] Health status is obtained by checking the Additional Sense Code
+(ASC) and Additional Sense Code Qualifier (ASCQ) from Informal Exceptions
+(IE) log page (if supported) and/or from SCSI sense data.
+
+[SCSI tape drive or changer] TapeAlert status is obtained by reading the
+TapeAlert log page.
+Please note that the TapeAlert log page flags are cleared for the initiator
+when the page is read.
+This means that each alert condition is reported only once by \fBsmartctl\fP
+for each initiator for each activation of the condition.
+.\" %IF OS FreeBSD Linux Windows Cygwin
+
+[NVMe] [FreeBSD, Linux, Windows and Cygwin only]
+[NEW EXPERIMENTAL SMARTCTL FEATURE]
+NVMe status is obtained by reading the "Critical Warning" byte from
+the SMART/Health Information log.
+.\" %ENDIF OS FreeBSD Linux Windows Cygwin
.TP
.B \-c, \-\-capabilities
-[ATA only] Prints only the generic SMART capabilities. These
+[ATA] Prints only the generic SMART capabilities. These
show what SMART features are implemented and how the device will
respond to some of the different SMART commands. For example it
shows if the device logs errors, if it supports offline surface
Immediate Offline Test is carried out. Please see REFERENCES below
for further information about the the flags and capabilities described
by this option.
+.\" %IF OS FreeBSD Linux Windows Cygwin
+
+[NVMe] [FreeBSD, Linux, Windows and Cygwin only]
+[NEW EXPERIMENTAL SMARTCTL FEATURE]
+Prints various NVMe device capabilities obtained from the Identify Controller
+and the Identify Namespace data structure.
+.\" %ENDIF OS FreeBSD Linux Windows Cygwin
.TP
.B \-A, \-\-attributes
[ATA] Prints only the vendor specific SMART Attributes. The Attributes
and start-stop cycle counter log pages. Certain vendor specific
attributes are listed if recognised. The attributes are output in a
relatively free format (compared with ATA disk attributes).
+.\" %IF OS FreeBSD Linux Windows Cygwin
+
+[NVMe] [FreeBSD, Linux, Windows and Cygwin only]
+[NEW EXPERIMENTAL SMARTCTL FEATURE]
+For NVMe devices the attributes are obtained from the SMART/Health
+Information log.
+.\" %ENDIF OS FreeBSD Linux Windows Cygwin
.TP
.B \-f FORMAT, \-\-format=FORMAT
[ATA only] Selects the output format of the attributes:
\- [SCSI] prints the error counter log pages for reads, write and verifies.
The verify row is only output if it has an element other than zero.
+.\" %IF OS FreeBSD Linux Windows Cygwin
+.I error[,NUM]
+\- [NVMe] [FreeBSD, Linux, Windows and Cygwin only]
+[NEW EXPERIMENTAL SMARTCTL FEATURE]
+prints the NVMe Error Information log.
+Only the 16 most recent log entries are printed by default.
+This number can be changed by the optional parameter NUM.
+The maximum number of log entries is vendor specific
+(in the range from 1 to 256 inclusive).
+
+.\" %ENDIF OS FreeBSD Linux Windows Cygwin
.I xerror[,NUM][,error]
\- [ATA only] prints the Extended Comprehensive SMART error log
(General Purpose Log address 0x03). Unlike the Summary SMART error
writes a binary representation of the one sector log 0x11
(SATA Phy Event Counters) to file log.bin.
+.\" %IF OS FreeBSD Linux Windows Cygwin
+.I nvmelog,PAGE,SIZE
+\- [NVMe only] [FreeBSD, Linux, Windows and Cygwin only]
+[NEW EXPERIMENTAL SMARTCTL FEATURE]
+prints a hex dump of the first SIZE bytes from the NVMe log with
+identifier PAGE.
+PAGE is a hexadecimal number in the range from 0x1 to 0xff.
+SIZE is a hexadecimal number in the range from 0x4 to 0x4000 (16 KiB).
+\fBWARNING: Do not specify the identifier of an unknown log page.
+Reading a log page may have undesirable side effects.\fP
+
+.\" %ENDIF OS FreeBSD Linux Windows Cygwin
.I ssd
\- [ATA] prints the Solid State Device Statistics log page.
This has the same effect as \'\-l devstat,7\', see above.
.\"! \fBEXEDIR/drivedb.h\fP
.\" %ENDIF OS Windows
is present, the contents of this file is used instead of the built in table.
+.\" %IF ENABLE_UPDATE_SMART_DRIVEDB
Run
.\" %IF NOT OS Windows
.\"! \fBEXEDIR/update-smart-drivedb.exe\fP
.\" %ENDIF OS Windows
to update this file from the smartmontools SVN repository.
+.\" %ENDIF ENABLE_UPDATE_SMART_DRIVEDB
.\" %ENDIF ENABLE_DRIVEDB
The database files use the same C/C++ syntax that is used to initialize
For example the commands:
.nf
- smartctl \-t select,10\-20 /dev/hda
- smartctl \-t select,10+11 /dev/hda
+ smartctl \-t select,10\-20 /dev/sda
+ smartctl \-t select,10+11 /dev/sda
.fi
both runs a self test on one span consisting of LBAs ten to twenty
(inclusive). The command:
.nf
- smartctl \-t select,100000000\-max /dev/hda
+ smartctl \-t select,100000000\-max /dev/sda
.fi
run a self test from LBA 100000000 up to the end of the disk.
The \'\-t\' option can be given up to five times, to test
up to five spans. For example the command:
.nf
- smartctl \-t select,0\-100 \-t select,1000\-2000 /dev/hda
+ smartctl \-t select,0\-100 \-t select,1000\-2000 /dev/sda
.fi
runs a self test on two spans. The first span consists of 101 LBAs
and the second span consists of 1001 LBAs. Note that the spans can
overlap partially or completely, for example:
.nf
- smartctl \-t select,0\-10 \-t select,5\-15 \-t select,10\-20 /dev/hda
+ smartctl \-t select,0\-10 \-t select,5\-15 \-t select,10\-20 /dev/sda
.fi
The results of the selective self-test can be obtained (both during
and after the test) by printing the SMART self-test log, using the
For example the commands:
.nf
- smartctl \-t select,10\-20 /dev/hda
- smartctl \-t select,redo /dev/hda
- smartctl \-t select,redo+20 /dev/hda
+ smartctl \-t select,10\-20 /dev/sda
+ smartctl \-t select,redo /dev/sda
+ smartctl \-t select,redo+20 /dev/sda
.fi
have the same effect as:
.nf
- smartctl \-t select,10\-20 /dev/hda
- smartctl \-t select,10\-20 /dev/hda
- smartctl \-t select,10\-29 /dev/hda
+ smartctl \-t select,10\-20 /dev/sda
+ smartctl \-t select,10\-20 /dev/sda
+ smartctl \-t select,10\-29 /dev/sda
.fi
.I select,next[+SIZE]
For example the commands:
.nf
- smartctl \-t select,0\-999 /dev/hda
- smartctl \-t select,next /dev/hda
- smartctl \-t select,next+2000 /dev/hda
+ smartctl \-t select,0\-999 /dev/sda
+ smartctl \-t select,next /dev/sda
+ smartctl \-t select,next+2000 /dev/sda
.fi
have the same effect as:
.nf
- smartctl \-t select,0\-999 /dev/hda
- smartctl \-t select,1000\-1999 /dev/hda
- smartctl \-t select,2000\-3999 /dev/hda
+ smartctl \-t select,0\-999 /dev/sda
+ smartctl \-t select,1000\-1999 /dev/sda
+ smartctl \-t select,2000\-3999 /dev/sda
.fi
If the last test ended at the last LBA of the disk, the new range starts
.SH EXAMPLES
.nf
-.B smartctl \-a /dev/hda
+.B smartctl \-a /dev/sda
.fi
-Print a large amount of SMART information for drive /dev/hda which is
-typically an ATA (IDE) or SATA disk in Linux.
+Print a large amount of SMART information for drive /dev/sda .
.PP
.nf
-.B smartctl \-a /dev/sdb
+.B smartctl \-s off /dev/sdd
.fi
-Print a large amount of SMART information for drive /dev/sdb . This may
-be a SCSI disk or an ATA (SATA) disk.
+Disable SMART monitoring and data log collection on drive /dev/sdd .
.PP
.nf
-.B smartctl \-s off /dev/hdd
+.B smartctl \-\-smart=on \-\-offlineauto=on \-\-saveauto=on /dev/sda
.fi
-Disable SMART monitoring and data log collection on drive /dev/hdd .
-.PP
-.nf
-.B smartctl \-\-smart=on \-\-offlineauto=on \-\-saveauto=on /dev/hda
-.fi
-Enable SMART on drive /dev/hda, enable automatic offline
+Enable SMART on drive /dev/sda, enable automatic offline
testing every four hours, and enable autosaving of
SMART Attributes. This is a good start-up line for your system\'s
init files. You can issue this command on a running system.
.PP
.nf
-.B smartctl \-t long /dev/hdc
+.B smartctl \-t long /dev/sdc
.fi
-Begin an extended self-test of drive /dev/hdc. You can issue this
+Begin an extended self-test of drive /dev/sdc. You can issue this
command on a running system. The results can be seen in the self-test
log visible with the \'\-l selftest\' option after it has completed.
.PP
.nf
-.B smartctl \-s on \-t offline /dev/hda
+.B smartctl \-s on \-t offline /dev/sda
.fi
Enable SMART on the disk, and begin an immediate offline test of
-drive /dev/hda. You can issue this command on a running system. The
+drive /dev/sda. You can issue this command on a running system. The
results are only used to update the SMART Attributes, visible
with the \'\-A\' option. If any device errors occur, they are logged to
the SMART error log, which can be seen with the \'\-l error\' option.
.PP
.nf
-.B smartctl \-A \-v 9,minutes /dev/hda
+.B smartctl \-A \-v 9,minutes /dev/sda
.fi
Shows the vendor Attributes, when the disk stores its power-on time
internally in minutes rather than hours.
.PP
.nf
-.B smartctl \-q errorsonly \-H \-l selftest /dev/hda
+.B smartctl \-q errorsonly \-H \-l selftest /dev/sda
.fi
Produces output only if the device returns failing SMART status,
or if some of the logged self-tests ended with errors.
.PP
.nf
-.B smartctl \-q silent \-a /dev/hda
+.B smartctl \-q silent \-a /dev/sda
.fi
-Examine all SMART data for device /dev/hda, but produce no
+Examine all SMART data for device /dev/sda, but produce no
printed output. You must use the exit status (the
.B $?
shell variable) to learn if any Attributes are out of bound, if the
first channel of the first HighPoint RocketRAID controller card.
.PP
.nf
-.B smartctl \-t select,10\-100 \-t select,30\-300 \-t afterselect,on \-t pending,45 /dev/hda
+.B smartctl \-t select,10\-100 \-t select,30\-300 \-t afterselect,on \-t pending,45 /dev/sda
.fi
Run a selective self-test on LBAs 10 to 100 and 30 to 300. After the
these LBAs have been tested, read-scan the remainder of the disk. If the disk is
Examine all SMART data for the first SCSI disk connected to a cciss
RAID controller card.
-.SH RETURN VALUES
-The return values of \fBsmartctl\fP are defined by a bitmask. If all
-is well with the disk, the return value (exit status) of
+.SH EXIT STATUS
+The exit statuses of \fBsmartctl\fP are defined by a bitmask.
+If all is well with the disk, the exit status (return value) of
\fBsmartctl\fP is 0 (all bits turned off). If a problem occurs, or an
error, potential error, or fault is detected, then a non-zero status
-is returned. In this case, the eight different bits in the return
-value have the following meanings for ATA disks; some of these values
+is returned. In this case, the eight different bits in the exit status
+have the following meanings for ATA disks; some of these values
may also be returned for SCSI disks.
.TP
.B Bit 0:
optional local drive database (see \'\-B\' option).
.\" %ENDIF NOT OS Windows
-.SH NOTES
-The TapeAlert log page flags are cleared for the initiator when the
-page is read. This means that each alert condition is reported only
-once by \fBsmartctl\fP for each initiator for each activation of the
-condition.
-
.SH AUTHORS
-\fBBruce Allen\fP
+\fBBruce Allen\fP (project initiator),
.br
-University of Wisconsin \- Milwaukee Physics Department
+\fBChristian Franke\fP (project manager, Windows port and all sort of things),
.br
-\fBChristian Franke\fP (Windows interface, C++ redesign, most enhancements
-since 2009)
+\fBDouglas Gilbert\fP (SCSI subsystem),
.br
-\fBsmartmontools\-support@lists.sourceforge.net\fP
-
-The following have made large contributions to smartmontools:
+\fBVolker Kuhlmann\fP (moderator of support and database mailing list),
.br
-\fBCasper Dik\fP (Solaris SCSI interface)
+\fBGabriele Pohl\fP (wiki & development team support),
.br
-\fBDouglas Gilbert\fP (SCSI subsystem)
-.br
-\fBGuido Guenther\fP (Autoconf/Automake packaging)
-.br
-\fBGeoffrey Keating\fP (Darwin ATA interface)
-.br
-\fBEduard Martinescu\fP (FreeBSD interface)
-.br
-\fBFr\['e]d\['e]ric L. W. Meunier\fP (Web site and Mailing list)
-.br
-\fBGabriele Pohl\fP (Web site and Wiki, conversion from CVS to SVN)
-.br
-\fBKeiji Sawada\fP (Solaris ATA interface)
-.br
-\fBManfred Schwarb\fP (Drive database)
-.br
-\fBSergey Svishchev\fP (NetBSD interface)
-.br
-\fBDavid Snyder and Sergey Svishchev\fP (OpenBSD interface)
-.br
-\fBPhil Williams\fP (User interface and drive database)
+\fBAlex Samorukov\fP (FreeBSD port and more, new Trac wiki).
+
+Many other individuals have made contributions and corrections,
+see AUTHORS, ChangeLog and repository files.
+
+The first smartmontools code was derived from the smartsuite package,
+written by Michael Cornwell and Andre Hedrick.
+
+.SH REPORTING BUGS
+To submit a bug report, create a ticket in smartmontools wiki:
.br
-\fBYuri Dario\fP (OS/2, eComStation interface)
+<\fBhttp://www.smartmontools.org/\fP>.
.br
-\fBShengfeng Zhou\fP (Linux/FreeBSD HighPoint RocketRAID interface)
+Alternatively send the info to the smartmontools support mailing list:
.br
-Many other individuals have made smaller contributions and corrections.
-
-The first smartmontools code was derived from the smartsuite package,
-written by Michael Cornwell, and from the previous UCSC smartsuite package.
-This code was originally developed as a
-Senior Thesis by Michael Cornwell at the Concurrent Systems Laboratory
-(now part of the Storage Systems Research Center), Jack Baskin School
-of Engineering, University of California, Santa
-Cruz. \fBhttp://ssrc.soe.ucsc.edu/\fP .
+<\fBhttps://lists.sourceforge.net/lists/listinfo/smartmontools-support\fB>.
.SH SEE ALSO
-\fBsmartd\fP(8), \fBupdate-smart-drivedb\fP(8).
+\fBsmartd\fP(8).
+.\" %IF ENABLE_UPDATE_SMART_DRIVEDB
+.br
+\fBupdate-smart-drivedb\fP(8).
+.\" %ENDIF ENABLE_UPDATE_SMART_DRIVEDB
.SH REFERENCES
Please see the following web site for more info:
-\fBhttp://smartmontools.sourceforge.net/\fP
+\fBhttp://www.smartmontools.org/\fP
An introductory article about smartmontools is \fIMonitoring Hard
Disks with SMART\fP, by Bruce Allen, Linux Journal, January 2004,
Links to these and other documents may be found on the Links page of the
\fBsmartmontools\fP Wiki at \fBhttp://www.smartmontools.org/wiki/Links\fP .
-.SH SVN ID OF THIS PAGE
-$Id: smartctl.8.in 3965 2014-07-20 14:46:41Z chrfranke $
+.SH PACKAGE VERSION
+CURRENT_SVN_VERSION CURRENT_SVN_DATE CURRENT_SVN_REV
+.br
+$Id: smartctl.8.in 4311 2016-04-27 21:03:01Z chrfranke $
projects / mirror_smartmontools-debian.git / blobdiff