* Home page of code is: http://www.smartmontools.org
*
* Copyright (C) 2002-11 Bruce Allen
- * Copyright (C) 2008-16 Christian Franke
+ * Copyright (C) 2008-17 Christian Franke
* Copyright (C) 2000 Michael Cornwell <cornwell@acm.org>
*
* This program is free software; you can redistribute it and/or modify
#include "smartctl.h"
#include "utility.h"
-const char * smartctl_cpp_cvsid = "$Id: smartctl.cpp 4311 2016-04-27 21:03:01Z chrfranke $"
+const char * smartctl_cpp_cvsid = "$Id: smartctl.cpp 4585 2017-11-04 13:41:03Z chrfranke $"
CONFIG_H_CVSID SMARTCTL_H_CVSID;
// Globals to control printing
" --identify[=[w][nvb]]\n"
" Show words and bits from IDENTIFY DEVICE data (ATA)\n\n"
" -g NAME, --get=NAME\n"
-" Get device setting: all, aam, apm, lookahead, security, wcache, rcache, wcreorder\n\n"
+" Get device setting: all, aam, apm, dsn, lookahead, security,\n"
+" wcache, rcache, wcreorder, wcache-sct\n\n"
" -a, --all\n"
" Show all SMART information for device\n\n"
" -x, --xall\n"
" -q TYPE, --quietmode=TYPE (ATA)\n"
" Set smartctl quiet mode to one of: errorsonly, silent, noserial\n\n"
" -d TYPE, --device=TYPE\n"
-" Specify device type to one of: %s\n\n"
+" Specify device type to one of:\n"
+" %s\n\n" // TODO: fold this string
" -T TYPE, --tolerance=TYPE (ATA)\n"
" Tolerance: normal, conservative, permissive, verypermissive\n\n"
" -b TYPE, --badsum=TYPE (ATA)\n"
" Set action on bad checksum to one of: warn, exit, ignore\n\n"
" -r TYPE, --report=TYPE\n"
" Report transactions (see man page)\n\n"
-" -n MODE, --nocheck=MODE (ATA)\n"
+" -n MODE[,STATUS], --nocheck=MODE[,STATUS] (ATA)\n"
" No check if: never, sleep, standby, idle (see man page)\n\n",
getvalidarglist('d').c_str()); // TODO: Use this function also for other options ?
printf(
" Enable/disable Attribute autosave on device (on/off)\n\n"
" -s NAME[,VALUE], --set=NAME[,VALUE]\n"
" Enable/disable/change device setting: aam,[N|off], apm,[N|off],\n"
-" lookahead,[on|off], security-freeze, standby,[N|off|now],\n"
-" wcache,[on|off], rcache,[on|off], wcreorder,[on|off]\n\n"
+" dsn,[on|off], lookahead,[on|off], security-freeze,\n"
+" standby,[N|off|now], wcache,[on|off], rcache,[on|off],\n"
+" wcreorder,[on|off[,p]], wcache-sct,[ata|on|off[,p]]\n\n"
);
printf(
"======================================= READ AND DISPLAY DATA OPTIONS =====\n\n"
" Set output format for attributes: old, brief, hex[,id|val]\n\n"
" -l TYPE, --log=TYPE\n"
" Show device log. TYPE: error, selftest, selective, directory[,g|s],\n"
-" xerror[,N][,error], xselftest[,N][,selftest],\n"
-" background, sasphy[,reset], sataphy[,reset],\n"
-" scttemp[sts,hist], scttempint,N[,p],\n"
-" scterc[,N,M], devstat[,N], ssd,\n"
-" gplog,N[,RANGE], smartlog,N[,RANGE],\n"
-" nvmelog,N,SIZE\n\n"
+" xerror[,N][,error], xselftest[,N][,selftest], background,\n"
+" sasphy[,reset], sataphy[,reset], scttemp[sts,hist],\n"
+" scttempint,N[,p], scterc[,N,M], devstat[,N], defects[,N], ssd,\n"
+" gplog,N[,RANGE], smartlog,N[,RANGE], nvmelog,N,SIZE\n\n"
" -v N,OPTION , --vendorattribute=N,OPTION (ATA)\n"
" Set display OPTION for vendor Attribute N (see man page)\n\n"
" -F TYPE, --firmwarebug=TYPE (ATA)\n"
return "normal, conservative, permissive, verypermissive";
case 'b':
return "warn, exit, ignore";
+ case 'B':
+ return "[+]<FILE_NAME>";
case 'r':
return "ioctl[,N], ataioctl[,N], scsiioctl[,N], nvmeioctl[,N]";
case opt_smart:
"xerror[,N][,error], xselftest[,N][,selftest], "
"background, sasphy[,reset], sataphy[,reset], "
"scttemp[sts,hist], scttempint,N[,p], "
- "scterc[,N,M], devstat[,N], ssd, "
+ "scterc[,N,M], devstat[,N], defects[,N], ssd, "
"gplog,N[,RANGE], smartlog,N[,RANGE], "
"nvmelog,N,SIZE";
case 'P':
case 'F':
return std::string(get_valid_firmwarebug_args()) + ", swapid";
case 'n':
- return "never, sleep, standby, idle";
+ return "never, sleep[,STATUS], standby[,STATUS], idle[,STATUS]";
case 'f':
return "old, brief, hex[,id|val]";
case 'g':
- return "aam, apm, lookahead, security, wcache, rcache, wcreorder";
+ return "aam, apm, dsn, lookahead, security, wcache, rcache, wcreorder, wcache-sct";
case opt_set:
- return "aam,[N|off], apm,[N|off], lookahead,[on|off], security-freeze, "
- "standby,[N|off|now], wcache,[on|off], rcache,[on|off], wcreorder,[on|off]";
+ return "aam,[N|off], apm,[N|off], dsn,[on|off], lookahead,[on|off], security-freeze, "
+ "standby,[N|off|now], wcache,[on|off], rcache,[on|off], wcreorder,[on|off[,p]], "
+ "wcache-sct,[ata|on|off[,p]]";
case 's':
return getvalidarglist(opt_smart)+", "+getvalidarglist(opt_set);
case opt_identify:
badarg = true;
}
+ } else if (str_starts_with(optarg, "defects")) {
+ int n1 = -1, n2 = -1, len = strlen(optarg);
+ unsigned val = ~0;
+ sscanf(optarg, "defects%n,%u%n", &n1, &val, &n2);
+ if (n1 == len)
+ ataopts.pending_defects_log = 31; // Entries of first page
+ else if (n2 == len && val <= 0xffff * 32 - 1)
+ ataopts.pending_defects_log = val;
+ else
+ badarg = true;
+
} else if (!strncmp(optarg, "xerror", sizeof("xerror")-1)) {
int n1 = -1, n2 = -1, len = strlen(optarg);
unsigned val = 8;
ataopts.sct_erc_get = true;
ataopts.sct_wcache_reorder_get = true;
ataopts.devstat_all_pages = true;
+ // ataopts.pending_defects_log = 31; // TODO: Add if no longer EXPERIMENTAL
+ ataopts.pending_defects_info = true; // TODO: Remove then
ataopts.sataphy = true;
ataopts.get_set_used = true;
ataopts.get_aam = ataopts.get_apm = true;
ataopts.get_security = true;
ataopts.get_lookahead = ataopts.get_wcache = true;
+ ataopts.get_dsn = true;
scsiopts.get_rcd = scsiopts.get_wce = true;
scsiopts.smart_background_log = true;
scsiopts.smart_ss_media_log = true;
break;
case 'n':
// skip disk check if in low-power mode
- if (!strcmp(optarg, "never"))
+ if (!strcmp(optarg, "never")) {
ataopts.powermode = 1; // do not skip, but print mode
- else if (!strcmp(optarg, "sleep"))
- ataopts.powermode = 2;
- else if (!strcmp(optarg, "standby"))
- ataopts.powermode = 3;
- else if (!strcmp(optarg, "idle"))
- ataopts.powermode = 4;
- else
- badarg = true;
+ }
+ else {
+ int n1 = -1, n2 = -1, len = strlen(optarg);
+ char s[7+1]; unsigned i = FAILPOWER;
+ sscanf(optarg, "%9[a-z]%n,%u%n", s, &n1, &i, &n2);
+ if (!((n1 == len || n2 == len) && i <= 255))
+ badarg = true;
+ else if (!strcmp(s, "sleep"))
+ ataopts.powermode = 2;
+ else if (!strcmp(s, "standby"))
+ ataopts.powermode = 3;
+ else if (!strcmp(s, "idle"))
+ ataopts.powermode = 4;
+ else
+ badarg = true;
+ ataopts.powerexit = i;
+ }
break;
case 'f':
if (!strcmp(optarg, "old")) {
int n1 = -1, n2 = -1, n3 = -1, len = strlen(optarg);
if (sscanf(optarg, "%16[^,=]%n%*[,=]%n%u%n", name, &n1, &n2, &val, &n3) >= 1
&& (n1 == len || (!get && n2 > 0))) {
- bool on = (n2 > 0 && !strcmp(optarg+n2, "on"));
- bool off = (n2 > 0 && !strcmp(optarg+n2, "off"));
+ bool on = false;
+ bool off = false;
+ bool ata = false;
+ bool persistent = false;
+
+ if (n2 > 0) {
+ int len2 = strlen(optarg + n2);
+ char * tmp = strstr(optarg+n2, ",p");
+ // handle ",p" in persistent options like: wcache-sct,[ata|on|off],p
+ if (tmp && (strlen(tmp) == 2)) {
+ persistent = true;
+ len2 = strlen(optarg+n2) - 2;
+
+ // the ,p option only works for set of SCT Feature Control command
+ if (strcmp(name, "wcache-sct") != 0 &&
+ strcmp(name, "wcreorder") != 0)
+ badarg = true;
+ }
+ on = !strncmp(optarg+n2, "on", len2);
+ off = !strncmp(optarg+n2, "off", len2);
+ ata = !strncmp(optarg+n2, "ata", len2);
+ }
if (n3 != len)
val = ~0U;
ataopts.get_aam = ataopts.get_apm = true;
ataopts.get_security = true;
ataopts.get_lookahead = ataopts.get_wcache = true;
+ ataopts.get_dsn = true;
scsiopts.get_rcd = scsiopts.get_wce = true;
}
else if (!strcmp(name, "aam")) {
badarg = true;
}
else if (!strcmp(name, "wcreorder")) {
+ ataopts.sct_wcache_reorder_set_pers = persistent;
if (get) {
ataopts.sct_wcache_reorder_get = true;
}
else
badarg = true;
}
+ else if (!strcmp(name, "wcache-sct")) {
+ ataopts.sct_wcache_sct_set_pers = persistent;
+ if (get) {
+ ataopts.sct_wcache_sct_get = true;
+ }
+ else if (off)
+ ataopts.sct_wcache_sct_set = 3;
+ else if (on)
+ ataopts.sct_wcache_sct_set = 2;
+ else if (ata)
+ ataopts.sct_wcache_sct_set = 1;
+ else
+ badarg = true;
+ }
else if (!strcmp(name, "rcache")) {
if (get)
scsiopts.get_rcd = true;
else
badarg = true;
}
+ else if (!strcmp(name, "dsn")) {
+ if (get) {
+ ataopts.get_dsn = true;
+ }
+ else if (off) {
+ ataopts.set_dsn = -1;
+ }
+ else if (on) {
+ ataopts.set_dsn = 1;
+ }
+ else
+ badarg = true;
+ }
else
badarg = true;
}
dev->get_info_name(), dev->get_dev_type(), get_protocol_info(dev.get()));
if (dev->is_ata() && ataopts.powermode>=2 && dev->is_powered_down()) {
- pout( "%s: Device is in %s mode, exit(%d)\n", dev->get_info_name(), "STANDBY (OS)", FAILPOWER );
- return FAILPOWER;
+ pout("Device is in STANDBY (OS) mode, exit(%d)\n", ataopts.powerexit);
+ return ataopts.powerexit;
}
// Open device
projects / mirror_smartmontools-debian.git / blobdiff