.ig
Copyright (C) 2002-10 Bruce Allen <smartmontools-support@lists.sourceforge.net>
-$Id: smartd.8.in 3529 2012-03-25 17:26:10Z chrfranke $
+$Id: smartd.8.in 3561 2012-06-05 19:49:31Z chrfranke $
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
.\" %ENDIF OS NetBSD OpenBSD
.\" %IF OS Solaris
.IP \fBSOLARIS:\fP 9
-Examine all entries \fB"/dev/rdsk/c?t?d?s?"\fP for IDE/ATA and SCSI disk
+Examine all entries \fB"/dev/rdsk/*s0"\fP for IDE/ATA and SCSI disk
devices, and entries \fB"/dev/rmt/*"\fP for SCSI tape devices.
.\" %ENDIF OS Solaris
.\" %IF OS Darwin
\fB"/dev/sdX"\fP) and all physical disks (\'ports\' \fB",N"\fP)
detected behind this controller. Same for a second controller if present.
-[NEW EXPERIMENTAL SMARTD FEATURE] If directive \'\-d csmi\' is specified,
-examine all entries \fB"/dev/csmi[0\-9],N"\fP for drives behind Intel
-Matrix RAID driver.
+If directive \'\-d csmi\' or no \'\-d\' directive is specified,
+examine all entries \fB"/dev/csmi[0\-9],N"\fP for drives behind an Intel
+ICHxR controller with RST driver.
.\" %ENDIF OS Windows Cygwin
.\" %IF OS Cygwin
.IP \fBCYGWIN\fP: 9
.\" %IF OS Windows
(Windows: CONTROL\-Break).
-Windows only: The "debug" mode can be toggled by the command
+[Windows only] The "debug" mode can be toggled by the command
\fBsmartd sigusr2\fP. A new console for debug output is opened when
debug mode is enabled.
.\" %ENDIF OS Windows
.\" %IF OS Windows
.TP
.B \-\-service
-Windows only: Enables \fBsmartd\fP to run as a Windows service.
+[Windows only] Enables \fBsmartd\fP to run as a Windows service.
The option must be specified in the service command line as the first
argument. It should not be used from console.
See NOTES below for details.
excessive number of disks, or by lines in \fB /usr/local/etc/smartd.conf\fP that are too long.
Please report this problem to \fB smartmontools-support@lists.sourceforge.net\fP.
.TP
-.B 10
+.B 10:
An inconsistency was found in \fBsmartd\fP\'s internal data
structures. This should never happen. It must be due to either a
coding or compiler bug. \fIPlease\fP report such failures to
.SH
SVN ID OF THIS PAGE:
-$Id: smartd.8.in 3529 2012-03-25 17:26:10Z chrfranke $
+$Id: smartd.8.in 3561 2012-06-05 19:49:31Z chrfranke $