.ig
-Copyright (C) 2002-10 Bruce Allen <smartmontools-support@lists.sourceforge.net>
-Copyright (C) 2004-14 Christian Franke <smartmontools-support@lists.sourceforge.net>
+Copyright (C) 2002-10 Bruce Allen
+Copyright (C) 2004-15 Christian Franke
-$Id: smartd.conf.5.in 3965 2014-07-20 14:46:41Z chrfranke $
+$Id: smartd.conf.5.in 4103 2015-06-01 19:51:18Z chrfranke $
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
California, Santa Cruz. http://ssrc.soe.ucsc.edu/
..
-.TH SMARTD.CONF 5 CURRENT_SVN_DATE CURRENT_SVN_VERSION CURRENT_SVN_DATE
+.TH SMARTD.CONF 5 "CURRENT_SVN_DATE" "CURRENT_SVN_VERSION" "SMART Monitoring Tools"
.SH NAME
\fBsmartd.conf\fP \- SMART Disk Monitoring Daemon Configuration File\fP
-.SH PACKAGE VERSION
-CURRENT_SVN_VERSION CURRENT_SVN_DATE CURRENT_SVN_REV
-
.SH DESCRIPTION
.\" %IF NOT OS ALL
.\"! [This man page is generated for the OS_MAN_FILTER version of smartmontools.
.nf
.B ################################################
.B # This is an example smartd startup config file
-.B # /usr/local/etc/smartd.conf for monitoring three
-.B # ATA disks, three SCSI disks, six ATA disks
-.B # behind two 3ware controllers, three SATA disks
-.B # directly connected to the HighPoint Rocket-
-.B # RAID controller, two SATA disks connected to
-.B # the HighPoint RocketRAID controller via a pmport
-.B # device, four SATA disks connected to an Areca
-.B # RAID controller, and one SATA disk.
+.B # /usr/local/etc/smartd.conf
.B #
-.B # First ATA disk on two different interfaces. On
-.B # the second disk, start a long self-test every
+.B # On the second disk, start a long self-test every
.B # Sunday between 3 and 4 am.
.B #
-.B \ \ /dev/hda -a -m admin@example.com,root@localhost
-.B \ \ /dev/hdc -a -I 194 -I 5 -i 12 -s L/../../7/03
+.B \ \ /dev/sda -a -m admin@example.com,root@localhost
+.B \ \ /dev/sdb -a -I 194 -I 5 -i 12 -s L/../../7/03
.B #
-.B # SCSI disks. Send a TEST warning email to admin on
-.B # startup.
+.B # Send a TEST warning email to admin on startup.
.B #
-.B \ \ /dev/sda
-.B \ \ /dev/sdb -m admin@example.com -M test
+.B \ \ /dev/sdc -m admin@example.com -M test
.B #
.B # Strange device. It\'s SCSI. Start a scheduled
.B # long self test between 5 and 6 am Monday/Thursday
.B # and Usage Attributes, apart from Attributes
.B # 9, 194, and 231, and shows continued lines:
.B #
-.B \ \ /dev/hdd\ -l\ error\ \e
+.B \ \ /dev/sdd\ -l\ error\ \e
.B \ \ \ \ \ \ \ \ \ \ \ -l\ selftest\ \e
.B \ \ \ \ \ \ \ \ \ \ \ -t\ \e\ \ \ \ \ \ # Attributes not tracked:
.B \ \ \ \ \ \ \ \ \ \ \ -I\ 194\ \e\ \ # temperature
in I/O errors and may disconnect the drive. The same applies if the specified
PORT does not exist or is not connected to a disk.
-[NEW EXPERIMENTAL SMARTD FEATURE]
The Prolific PL2507/3507 USB bridges with older firmware support a pass-through
command similar to JMicron and work with \'\-d usbjmicron,0\'.
Newer Prolific firmware requires a modified command which can be selected by
\'\-d usbjmicron,p\'.
Note that this does not yet support the SMART status command.
+.I usbprolific
+\- [NEW EXPERIMENTAL SMARTD FEATURE]
+this device type is for SATA disks that are behind a Prolific PL2571/2771/2773/2775
+USB to SATA bridge.
+
.I usbsunplus
\- this device type is for SATA disks that are behind a SunplusIT USB to SATA
bridge.
number.
Please see the \fBsmartctl\fP(8) man page for further details.
+.\" %ENDIF OS Linux
+.\" %IF OS Linux Windows Cygwin
.I aacraid,H,L,ID
-\- [Linux only] [NEW EXPERIMENTAL SMARTD FEATURE]
+\- [Linux, Windows and Cygwin only] [NEW EXPERIMENTAL SMARTD FEATURE]
the device consists of one or more SCSI/SAS disks connected to an AacRaid controller.
The non-negative integers H,L,ID (Host number, Lun, ID) denote which disk
on the controller is monitored.
In log files and email messages this disk will be identified as aacraid_disk_HH_LL_ID.
Please see the \fBsmartctl\fP(8) man page for further details.
-.\" %ENDIF OS Linux
+.\" %ENDIF OS Linux Windows Cygwin
.\" %IF OS FreeBSD Linux
.I 3ware,N
\- [FreeBSD and Linux only] the device consists of one or more ATA disks
Please see the \fBsmartctl\fP(8) man page for further details.
.I areca,N/E
-\- [FreeBSD, Linux, Windows and Cygwin only] [NEW EXPERIMENTAL SMARTD FEATURE] the
-device consists of one or more SATA or SAS disks connected to an Areca SAS RAID controller.
+\- [FreeBSD, Linux, Windows and Cygwin only] the device consists of one
+or more SATA or SAS disks connected to an Areca SAS RAID controller.
The integer N (range 1 to 128) denotes the channel (slot) and E (range
1 to 8) denotes the enclosure.
Important: This requires Areca SAS controller firmware version 1.51 or later.
.\" %ENDIF OS FreeBSD Linux
.I ignore
-\- [NEW EXPERIMENTAL SMARTD FEATURE]
-the device specified by this configuration entry should be ignored.
+\- the device specified by this configuration entry should be ignored.
This allows to ignore specific devices which are detected by a following
DEVICESCAN configuration line.
It may also be used to temporary disable longer multi-line configuration entries.
[Please see the \fBsmartctl \-S\fP command-line option.]
.TP
.B \-H
-[ATA only] Check the SMART health status of the disk. If any Prefailure
-Attributes are less than or equal to their threshold values, then disk
+[ATA only] Check the health status of the disk with the SMART RETURN
+STATUS command.
+If this command reports a failing health status, then disk
failure is predicted in less than 24 hours, and a message at loglevel
.B \'LOG_CRIT\'
will be logged to syslog. [Please see the
.\" %IF ENABLE_SMARTDPLUGINDIR
.\" %IF NOT OS Windows
-[NEW EXPERIMENTAL SMARTD FEATURE]
If a word of the comma separated list has the form \'@plugin\', a custom
script /usr/local/etc/smartd_warning.d/plugin is run and the word is
removed from the list before sending mail. The string \'plugin\' may be any
.\" %ENDIF ENABLE_SMARTDPLUGINDIR
.\" %IF OS Windows
-[Windows only] [NEW EXPERIMENTAL SMARTD FEATURE]
-If one of the following words are used as the first address in the
-comma separated list, warning messages are sent via WTSSendMessage().
+[Windows only] If one of the following words are used as the first address
+in the comma separated list, warning messages are sent via WTSSendMessage().
This displays message boxes on the desktops of the selected sessions.
Address \'\fBconsole\fP\' specifies the console session only,
\'\fBactive\fP\' specifies the console session and all active remote
is set to the argument of \-M exec, if present or else to \'mail\'
(examples: /usr/local/bin/mail, mail).
.IP \fBSMARTD_DEVICE\fP 4
-is set to the device path (examples: /dev/hda, /dev/sdb).
+is set to the device path (example: /dev/sda).
.IP \fBSMARTD_DEVICETYPE\fP 4
is set to the device type specified by \'-d\' directive or
\'auto\' if none.
.\" They define a non-existent option; useful because man2html can't correctly reset the margins.
.TP
.B \&
-The shell which is used to run PATH is system-dependent. For vanilla
-Linux/glibc it\'s bash. For other systems, the man page for
-\fBpopen\fP(3) should say what shell is used.
-
If the \'\-m ADD\' Directive is given with a normal address argument,
then the executable pointed to by PATH will be run in a shell with
STDIN receiving the body of the email message, and with the same
/usr/local/share/doc/smartmontools/examplescripts/.
.\" %ENDIF NOT OS Windows
-[NEW EXPERIMENTAL SMARTD FEATURE] The executable is run by the script
+The executable is run by the script
.\" %IF NOT OS Windows
/usr/local/etc/smartd_warning.sh.
.\" %ENDIF NOT OS Windows
devices, (rather than the default \-a, which monitors all SMART
properties).
-[NEW EXPERIMENTAL SMARTD FEATURE]
Configuration entries for specific devices may precede the \fBDEVICESCAN\fP entry.
For example
.nf
\fBsmartd\fP(8), \fBsmartctl\fP(8),
\fBmail\fP(1), \fBregex\fP(7).
-.SH SVN ID OF THIS PAGE
-$Id: smartd.conf.5.in 3965 2014-07-20 14:46:41Z chrfranke $
+.SH PACKAGE VERSION
+CURRENT_SVN_VERSION CURRENT_SVN_DATE CURRENT_SVN_REV
+.br
+$Id: smartd.conf.5.in 4103 2015-06-01 19:51:18Z chrfranke $