/*
- * Home page of code is: http://smartmontools.sourceforge.net
+ * Home page of code is: http://www.smartmontools.org
*
- * Copyright (C) 2002-11 Bruce Allen <smartmontools-support@lists.sourceforge.net>
+ * Copyright (C) 2002-11 Bruce Allen
+ * Copyright (C) 2008-16 Christian Franke
* Copyright (C) 2000 Michael Cornwell <cornwell@acm.org>
* Copyright (C) 2008 Oliver Bock <brevilo@users.sourceforge.net>
- * Copyright (C) 2008-15 Christian Franke <smartmontools-support@lists.sourceforge.net>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
extern "C" int getdomainname(char *, int); // no declaration in header files!
#endif
-const char * smartd_cpp_cvsid = "$Id: smartd.cpp 4059 2015-04-18 17:01:31Z chrfranke $"
+const char * smartd_cpp_cvsid = "$Id: smartd.cpp 4207 2016-01-22 19:35:10Z chrfranke $"
CONFIG_H_CVSID;
// smartd exit codes
// SCSI ONLY
- struct scsi_error_counter {
+ struct scsi_error_counter_t {
struct scsiErrorCounter errCounter;
unsigned char found;
- scsi_error_counter() : found(0) { }
+ scsi_error_counter_t() : found(0)
+ { memset(&errCounter, 0, sizeof(errCounter)); }
};
- scsi_error_counter scsi_error_counters[3];
+ scsi_error_counter_t scsi_error_counters[3];
- struct scsi_nonmedium_error {
+ struct scsi_nonmedium_error_t {
struct scsiNonMediumError nme;
unsigned char found;
- scsi_nonmedium_error() : found(0) { }
+ scsi_nonmedium_error_t() : found(0)
+ { memset(&nme, 0, sizeof(nme)); }
};
- scsi_nonmedium_error scsi_nonmedium_error;
+ scsi_nonmedium_error_t scsi_nonmedium_error;
persistent_dev_state();
};
env[11].set("SMARTD_NEXTDAYS", dates);
// now construct a command to send this as EMAIL
- char command[2048];
if (!*executable)
executable = "<mail>";
const char * newadd = (!address.empty()? address.c_str() : "<nomailer>");
const char * newwarn = (which? "Warning via" : "Test of");
#ifndef _WIN32
+ char command[2048];
snprintf(command, sizeof(command), "%s 2>&1", warning_script.c_str());
// tell SYSLOG what we are about to do...
errno?strerror(errno):"");
else {
// mail process apparently succeeded. Check and report exit status
- int status8;
-
if (WIFEXITED(status)) {
// exited 'normally' (but perhaps with nonzero status)
- status8=WEXITSTATUS(status);
-
+ int status8 = WEXITSTATUS(status);
if (status8>128)
PrintOut(LOG_CRIT,"%s %s to %s: failed (32-bit/8-bit exit status: %d/%d) perhaps caught signal %d [%s]\n",
newwarn, executable, newadd, status, status8, status8-128, strsignal(status8-128));
#else // _WIN32
{
+ char command[2048];
snprintf(command, sizeof(command), "cmd /c \"%s\"", warning_script.c_str());
char stdoutbuf[800]; // < buffer in syslog_win32::vsyslog()
}
}
+ // Check for ATA Security LOCK
+ unsigned short word128 = drive.words088_255[128-88];
+ bool locked = ((word128 & 0x0007) == 0x0007); // LOCKED|ENABLED|SUPPORTED
+ if (locked)
+ PrintOut(LOG_INFO, "Device: %s, ATA Security is **LOCKED**\n", name);
+
// Set default '-C 197[+]' if no '-C ID' is specified.
if (!cfg.curr_pending_set)
cfg.curr_pending_id = get_unc_attr_id(false, cfg.attribute_defs, cfg.curr_pending_incr);
if (!isSCTErrorRecoveryControlCapable(&drive))
PrintOut(LOG_INFO, "Device: %s, no SCT Error Recovery Control support, ignoring -l scterc\n",
name);
+ else if (locked)
+ PrintOut(LOG_INFO, "Device: %s, no SCT support if ATA Security is LOCKED, ignoring -l scterc\n",
+ name);
else if ( ataSetSCTErrorRecoveryControltime(atadev, 1, cfg.sct_erc_readtime )
|| ataSetSCTErrorRecoveryControltime(atadev, 2, cfg.sct_erc_writetime))
PrintOut(LOG_INFO, "Device: %s, set of SCT Error Recovery Control failed\n", name);
// please.
static int SCSIDeviceScan(dev_config & cfg, dev_state & state, scsi_device * scsidev)
{
- int k, err, req_len, avail_len, version, len;
+ int err, req_len, avail_len, version, len;
const char *device = cfg.name.c_str();
struct scsi_iec_mode_page iec;
UINT8 tBuf[64];
// Flag that certain log pages are supported (information may be
// available from other sources).
if (0 == scsiLogSense(scsidev, SUPPORTED_LPAGES, 0, tBuf, sizeof(tBuf), 0)) {
- for (k = 4; k < tBuf[3] + LOGPAGEHDRSIZE; ++k) {
+ for (int k = 4; k < tBuf[3] + LOGPAGEHDRSIZE; ++k) {
switch (tBuf[k]) {
case TEMPERATURE_LPAGE:
state.TempPageSupported = 1;
static int SCSICheckDevice(const dev_config & cfg, dev_state & state, scsi_device * scsidev, bool allow_selftests)
{
- UINT8 asc, ascq;
- UINT8 currenttemp;
- UINT8 triptemp;
- UINT8 tBuf[252];
const char * name = cfg.name.c_str();
- const char *cp;
// If the user has asked for it, test the email warning system
if (cfg.emailtest)
} else if (debugmode)
PrintOut(LOG_INFO,"Device: %s, opened SCSI device\n", name);
reset_warning_mail(cfg, state, 9, "open device worked again");
- currenttemp = 0;
- asc = 0;
- ascq = 0;
+
+ UINT8 asc = 0, ascq = 0;
+ UINT8 currenttemp = 0, triptemp = 0;
if (!state.SuppressReport) {
if (scsiCheckIE(scsidev, state.SmartPageSupported, state.TempPageSupported,
&asc, &ascq, ¤ttemp, &triptemp)) {
}
}
if (asc > 0) {
- cp = scsiGetIEString(asc, ascq);
+ const char * cp = scsiGetIEString(asc, ascq);
if (cp) {
PrintOut(LOG_CRIT, "Device: %s, SMART Failure: %s\n", name, cp);
MailWarning(cfg, state, 1,"Device: %s, SMART Failure: %s", name, cp);
}
if (!cfg.attrlog_file.empty()){
// saving error counters to state
+ UINT8 tBuf[252];
if (state.ReadECounterPageSupported && (0 == scsiLogSense(scsidev,
READ_ERROR_COUNTER_LPAGE, 0, tBuf, sizeof(tBuf), 0))) {
scsiDecodeErrCounterPage(tBuf, &state.scsi_error_counters[0].errCounter);
configfile, lineno, name, arg, cfg.test_regex.get_errmsg());
return -1;
}
+ // Do a bit of sanity checking and warn user if we think that
+ // their regexp is "strange". User probably confused about shell
+ // glob(3) syntax versus regular expression syntax regexp(7).
+ if (arg[(val = strspn(arg, "0123456789/.-+*|()?^$[]SLCOcnr"))])
+ PrintOut(LOG_INFO, "File %s line %d (drive %s): warning, character %d (%c) looks odd in extended regular expression %s\n",
+ configfile, lineno, name, val+1, arg[val], arg);
}
- // Do a bit of sanity checking and warn user if we think that
- // their regexp is "strange". User probably confused about shell
- // glob(3) syntax versus regular expression syntax regexp(7).
- if (arg[(val = strspn(arg, "0123456789/.-+*|()?^$[]SLCOcnr"))])
- PrintOut(LOG_INFO, "File %s line %d (drive %s): warning, character %d (%c) looks odd in extended regular expression %s\n",
- configfile, lineno, name, val+1, arg[val], arg);
break;
case 'm':
// send email to address that follows
break;
case 'W':
// track Temperature
- if ((val=Get3Integers(arg=strtok(NULL,delim), name, token, lineno, configfile,
- &cfg.tempdiff, &cfg.tempinfo, &cfg.tempcrit))<0)
+ if (Get3Integers(arg=strtok(NULL, delim), name, token, lineno, configfile,
+ &cfg.tempdiff, &cfg.tempinfo, &cfg.tempcrit) < 0)
return -1;
break;
case 'v':
if (scandevice==-2)
return -1;
// the final line is part of a continuation line
- cont=0;
entry+=scandevice;
}
break;
opterr=optopt=0;
bool badarg = false;
- bool no_defaultdb = false; // set true on '-B FILE'
+ bool use_default_db = true; // set false on '-B FILE'
// Parse input options.
int optchar;
if (*path == '+' && path[1])
path++;
else
- no_defaultdb = true;
+ use_default_db = false;
unsigned char savedebug = debugmode; debugmode = 1;
if (!read_drive_database(path))
EXIT(EXIT_BADCMD);
#endif
// Read or init drive database
- if (!no_defaultdb) {
+ {
unsigned char savedebug = debugmode; debugmode = 1;
- if (!read_default_drive_databases())
+ if (!init_drive_database(use_default_db))
EXIT(EXIT_BADCMD);
debugmode = savedebug;
}
projects / mirror_smartmontools-debian.git / blobdiff