# smartmontools init file for smartd
# Copyright (C) 2002-8 Bruce Allen
-# $Id: smartd.initd.in 4431 2017-08-08 19:38:15Z chrfranke $
+# SPDX-License-Identifier: GPL-2.0-or-later
+# $Id: smartd.initd.in 4760 2018-08-19 18:45:53Z chrfranke $
# For RedHat and cousins:
# chkconfig: 2345 40 40
# Description: Start S.M.A.R.T. disk and tape monitor.
### END INIT INFO
-# This program is free software; you can redistribute it and/or modify it
-# under the terms of the GNU General Public License as published by the Free
-# Software Foundation; either version 2, or (at your option) any later
-# version.
-# You should have received a copy of the GNU General Public License (for
-# example COPYING); if not, write to the Free Software Foundation, Inc.,
-# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
-# This code was originally developed as a Senior Thesis by Michael Cornwell
-# at the Concurrent Systems Laboratory (now part of the Storage Systems
-# Research Center), Jack Baskin School of Engineering, University of
-# California, Santa Cruz. http://ssrc.soe.ucsc.edu/.
-
# Uncomment the line below to pass options to smartd on startup.
# Note that distribution specific configuration files like
# /etc/{default,sysconfig}/smartmontools might override these
# PLEASE ADD OTHER LINUX DISTRIBUTIONS JUST BEFORE THIS LINE, USING elif
-elif uname -a | grep FreeBSD > /dev/null 2>&1 ; then
- # following is replaced by port install
- PREFIX=@@PREFIX@@
-
- # Updated to try both the RCNG version of things from 5.x, or fallback to
- # oldfashioned rc.conf
-
- if [ -r /etc/rc.subr ]; then
- # This is RC-NG, pick up our values
- . /etc/rc.subr
- name="smartd"
- rcvar="smartd_enable"
- command="$SMARTD_BIN"
- load_rc_config $name
- elif [ -r /etc/defaults/rc.conf ]; then
- # Not a 5.x system, try the default location for variables
- . /etc/defaults/rc.conf
- source_rc_confs
- elif [ -r /etc/rc.conf ]; then
- # Worst case, fallback to system config file
- . /etc/rc.conf
- fi
-
- if [ -r /etc/rc.subr ]; then
- # Use new functionality from RC-NG
- run_rc_command "$1"
- else
- PID_FILE=/var/run/smartd.pid
- case "$1" in
- start)
- $SMARTD_BIN -p $PID_FILE $smartd_flags
- echo -n " smartd"
- ;;
- stop)
- kill `cat $PID_FILE`
- echo -n " smartd"
- ;;
- restart)
- $0 stop
- sleep 1
- $0 start
- ;;
- reload)
- kill -s HUP `cat $PID_FILE`
- ;;
- report)
- kill -s USR1 `cat $PID_FILE`
- ;;
- *)
- echo "Usage: $0 {start|stop|restart|reload|report}"
- exit 1
- esac
- exit 0
- fi
-
elif uname -a | grep SunOS > /dev/null 2>&1 ; then
# Source configuration file. This should define the shell variable smartd_opts.
esac
exit 0
-# Cygwin
-elif uname | grep -i CYGWIN > /dev/null 2>&1 ; then
-
- # The following settings may be changed by the configuration file below
- # Service Name (must be unique)
- smartd_svcname=smartd
- # Service display name
- smartd_svcdisp="CYGWIN smartd"
- # Service description
- smartd_svcdesc="\
-Controls and monitors storage devices using the Self-Monitoring \
-Analysis and Reporting Technology System (S.M.A.R.T.) \
-built into ATA and SCSI Hard Drives. \
-http://www.smartmontools.org/"
-
- # Source configuration file. This should define the shell variable smartd_opts.
- # Email smartmontools-support mailing list if there is a better choice
- # of path for Cygwin
-
- [ -r /etc/sysconfig/smartmontools ] && . /etc/sysconfig/smartmontools
-
- PID_FILE=/var/run/smartd.pid
- RETVAL=0
-
- # Note: "[ -r $PID_FILE ]" is not used here. On Cygwin, this command may
- # return success even if the file is present but cannot be read by current user.
- # If smartd is running as service, smartd.pid is owned by local system account
- # which is different from any user ever executing this script.
-
- case "$1" in
- start)
- if cygrunsrv -L 2>/dev/null | grep "^${smartd_svcname}$" >/dev/null 2>&1; then
- echo -n "Starting service $smartd_svcname: "
- cygrunsrv -S "$smartd_svcname"
- else
- echo -n "Starting smartd as daemon: "
- $SMARTD_BIN -p $PID_FILE $smartd_opts
- fi
- RETVAL=$?
- ;;
- stop)
- echo -n "Shutting down smartd: "
- pid="`cat $PID_FILE 2>/dev/null`" && kill "$pid"
- RETVAL=$?
- ;;
- reload)
- echo -n "Reloading smartd configuration: "
- pid="`cat $PID_FILE 2>/dev/null`" && kill -HUP "$pid"
- RETVAL=$?
- ;;
- report)
- echo -n "Checking SMART devices now: "
- pid="`cat $PID_FILE 2>/dev/null`" && kill -USR1 "$pid"
- RETVAL=$?
- ;;
- restart)
- $0 stop
- sleep 1
- $0 start
- exit $?
- ;;
- install)
- shift
- [ $# -eq 0 ] || smartd_opts="$*"
- dep=; dep2=
- if cygrunsrv -L 2>/dev/null | grep "^syslogd$" >/dev/null 2>&1; then
- dep="syslogd"
- fi
- if cygrunsrv -L 2>/dev/null | grep "^syslog-ng" >/dev/null 2>&1; then
- dep2="syslog-ng"
- fi
- if [ -z "$dep" ]; then
- if [ -z "$dep2" ]; then
- echo "Warning: no syslog service installed, smartd will write to windows event log.";
- else
- dep="$dep2"
- fi
- else
- if [ -z "$dep2" ]; then
- :
- else
- dep=
- echo "Warning: both syslogd and syslog-ng installed, dependency not set."
- fi
- fi
- echo "Installing service ${smartd_svcname}${dep:+ (depending on '$dep')}${smartd_opts:+ with options '$smartd_opts'}:"
- cygrunsrv -I "$smartd_svcname" -d "$smartd_svcdisp" -f "$smartd_svcdesc" ${dep:+-y} $dep \
- -e CYGWIN="$CYGWIN" -p $SMARTD_BIN -a "-n -p ${PID_FILE}${smartd_opts:+ }$smartd_opts"
- RETVAL=$?
- ;;
- remove)
- echo "Removing service $smartd_svcname:"
- cygrunsrv -R "$smartd_svcname"
- RETVAL=$?
- ;;
- status)
- echo -n "Checking smartd status: "
- if cygrunsrv -L 2>/dev/null | grep "^${smartd_svcname}$" >/dev/null 2>&1; then
- if cygrunsrv -Q "$smartd_svcname" 2>/dev/null | grep "State *: Running" >/dev/null 2>&1; then
- echo "running as service '$smartd_svcname'."
- elif ps -e 2>/dev/null | grep " ${SMARTD_BIN}$" >/dev/null 2>&1; then
- echo "installed as service '$smartd_svcname' but running as daemon."
- else
- echo "installed as service '$smartd_svcname' but not running."
- RETVAL=1
- fi
- elif ps -e 2>/dev/null | grep " ${SMARTD_BIN}$" >/dev/null 2>&1; then
- echo "running as daemon."
- else
- echo "not running."
- RETVAL=1
- fi
- exit $RETVAL
- ;;
- *)
- echo "Usage: $0 {start|stop|restart|reload|report|status}"
- echo " $0 {install [options]|remove}"
- exit 1
- esac
-
- if [ "$RETVAL" -eq 0 ]; then echo "done"; else echo "ERROR"; fi
- exit $RETVAL
-
# Add other OSes HERE, using elif...
else
report_unsupported "Unknown"
projects / mirror_smartmontools-debian.git / blobdiff