We should use TEST_GEN_PROGS, not TEST_PROGS. That tells the selftests
makefile (lib.mk) that those tests are generated (built), and so it
adds the $(OUTPUT) prefix for us, making the out-of-tree build work
correctly.
It also means we don't need our own clean rule, lib.mk does it.
We also have to update the signal_tm rule to use $(OUTPUT).
Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
When building with clang (8 trunk, 7.0 release) the frame size limit is
hit:
arch/powerpc/xmon/xmon.c:452:12: warning: stack frame size of 2576
bytes in function 'xmon_core' [-Wframe-larger-than=]
Some investigation by Naveen indicates this is due to clang saving the
addresses to printf format strings on the stack.
While this issue is investigated, bump up the frame size limit for xmon
when building with clang.
Link: https://github.com/ClangBuiltLinux/linux/issues/252 Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
A deduplication data corruption is exposed in XFS and btrfs. It is
caused by extending the block match range to include the partial EOF
block, but then allowing unknown data beyond EOF to be considered a
"match" to data in the destination file because the comparison is only
made to the end of the source file. This corrupts the destination file
when the source extent is shared with it.
The VFS remapping prep functions only support whole block dedupe, but
we still need to appear to support whole file dedupe correctly. Hence
if the dedupe request includes the last block of the souce file, don't
include it in the actual dedupe operation. If the rest of the range
dedupes successfully, then reject the entire request. A subsequent
patch will enable us to shorten dedupe requests correctly.
When reflinking sub-file ranges, a data corruption can occur when the
source file range includes a partial EOF block. This shares the unknown
data beyond EOF into the second file at a position inside EOF, exposing
stale data in the second file.
If the reflink request includes the last block of the souce file, only
proceed with the reflink operation if it lands at or past the
destination file's current EOF. If it lands within the destination file
EOF, reject the entire request with -EINVAL and make the caller go the
hard way. A subsequent patch will enable us to shorten reflink requests
correctly.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Dave Chinner <david@fromorbit.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
This fixes a long standing bug where large amounts of output
could freeze the tty (most commonly seen on stdio console).
While the bug has always been there it became more pronounced
after moving to the new interrupt controller.
The line semantics are now changed to have true IRQ write
semantics which should further improve the tty/line subsystem
stability and performance
Signed-off-by: Anton Ivanov <anton.ivanov@cambridgegreys.com> Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
The current IRQ handler clears all the IRQ status bits when it bails
out. This is dangerous because it might clear away the status bits
that have just been set while processing the current handler. If this
happens, the IRQ event for the latest transfer is lost forever.
The IRQ status bits must be cleared *before* the next transfer is
kicked.
Currently, a timeout error could happen at a repeated START condition.
For a (non-repeated) START condition, the controller starts sending
data when the UNIPHIER_FI2C_CR_STA bit is set. However, for a repeated
START condition, the hardware starts running when the slave address is
written to the TX FIFO - the write to the UNIPHIER_FI2C_CR register is
actually unneeded.
Because the hardware is already running before the IRQ is enabled for
a repeated START, the driver may miss the IRQ event. In most cases,
this problem does not show up since modern CPUs are much faster than
the I2C transfer. However, it is still possible that a context switch
happens after the controller starts, but before the IRQ register is
set up.
To fix this,
- Do not write UNIPHIER_FI2C_CR for repeated START conditions.
- Enable IRQ *before* writing the slave address to the TX FIFO.
- Disable IRQ for the current CPU while queuing up the TX FIFO;
If the CPU is interrupted by some task, the interrupt handler
might be invoked due to the empty TX FIFO before completing the
setup.
This is unlikely to happen, but it is possible for a CPU to enter
the interrupt handler just after wait_for_completion_timeout() has
expired. If this happens, the hardware is accessed from multiple
contexts concurrently.
Disable the IRQ after wait_for_completion_timeout(), and do nothing
from the handler when the IRQ is disabled.
There are two cases when handle DISCARD merge.
If max_discard_segments == 1, the bios/requests need to be contiguous
to merge. If max_discard_segments > 1, it takes every bio as a range
and different range needn't to be contiguous.
But now, attempt_merge screws this up. It always consider contiguity
for DISCARD for the case max_discard_segments > 1 and cannot merge
contiguous DISCARD for the case max_discard_segments == 1, because
rq_attempt_discard_merge always returns false in this case.
This patch fixes both of the two cases above.
Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jianchao Wang <jianchao.w.wang@oracle.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
Currently, the kernel doesn't let the administrator set a macsec device
up unless its lower device is currently up. This is inconsistent, as a
macsec device that is up won't automatically go down when its lower
device goes down.
Now that linkstate propagation works, there's really no reason for this
limitation, so let's remove it.
Fixes: c09440f7dcb3 ("macsec: introduce IEEE 802.1AE driver") Reported-by: Radu Rendec <radu.rendec@gmail.com> Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
Like all other virtual devices (macvlan, vlan), the operstate of a
macsec device should match the state of its lower device. This is done
by calling netif_stacked_transfer_operstate from its netdevice notifier.
We also need to call netif_stacked_transfer_operstate when a new macsec
device is created, so that its operstate is set properly. This is only
relevant when we try to bring the device up directly when we create it.
Radu Rendec proposed a similar patch, inspired from the 802.1q driver,
that included changing the administrative state of the macsec device,
instead of just the operstate. This version is similar to what the
macvlan driver does, and updates only the operstate.
Fixes: c09440f7dcb3 ("macsec: introduce IEEE 802.1AE driver") Reported-by: Radu Rendec <radu.rendec@gmail.com> Reported-by: Patrick Talbert <ptalbert@redhat.com> Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
We've recently seen a workload on XFS filesystems with a repeatable
deadlock between background writeback and a multi-process application
doing concurrent writes and fsyncs to a small range of a file.
!done && !cycled
sets index to 0, restarts lookup
find page 1 dirty
find page 1 towrite
lock Page 1
page 1 is writeback
<blocks>
lock Page 1
<blocks>
DEADLOCK because:
- process 1 needs page 2 writeback to complete to make
enough progress to issue IO pending for page 1
- writeback needs page 1 writeback to complete so process 2
can progress and unlock the page it is blocked on, then it
can issue the IO pending for page 2
- process 2 can't make progress until process 1 issues IO
for page 1
The underlying cause of the problem here is that range_cyclic writeback is
processing pages in descending index order as we hold higher index pages
in a structure controlled from above write_cache_pages(). The
write_cache_pages() caller needs to be able to submit these pages for IO
before write_cache_pages restarts writeback at mapping index 0 to avoid
wcp inverting the page lock/writeback wait order.
generic_writepages() is not susceptible to this bug as it has no private
context held across write_cache_pages() - filesystems using this
infrastructure always submit pages in ->writepage immediately and so there
is no problem with range_cyclic going back to mapping index 0.
However:
mpage_writepages() has a private bio context,
exofs_writepages() has page_collect
fuse_writepages() has fuse_fill_wb_data
nfs_writepages() has nfs_pageio_descriptor
xfs_vm_writepages() has xfs_writepage_ctx
All of these ->writepages implementations can hold pages under writeback
in their private structures until write_cache_pages() returns, and hence
they are all susceptible to this deadlock.
Also worth noting is that ext4 has it's own bastardised version of
write_cache_pages() and so it /may/ have an equivalent deadlock. I looked
at the code long enough to understand that it has a similar retry loop for
range_cyclic writeback reaching the end of the file and then promptly ran
away before my eyes bled too much. I'll leave it for the ext4 developers
to determine if their code is actually has this deadlock and how to fix it
if it has.
There's a few ways I can see avoid this deadlock. There's probably more,
but these are the first I've though of:
1. get rid of range_cyclic altogether
2. range_cyclic always stops at EOF, and we start again from
writeback index 0 on the next call into write_cache_pages()
2a. wcp also returns EAGAIN to ->writepages implementations to
indicate range cyclic has hit EOF. writepages implementations can
then flush the current context and call wpc again to continue. i.e.
lift the retry into the ->writepages implementation
3. range_cyclic uses trylock_page() rather than lock_page(), and it
skips pages it can't lock without blocking. It will already do this
for pages under writeback, so this seems like a no-brainer
3a. all non-WB_SYNC_ALL writeback uses trylock_page() to avoid
blocking as per pages under writeback.
I don't think #1 is an option - range_cyclic prevents frequently
dirtied lower file offset from starving background writeback of
rarely touched higher file offsets.
#2 is simple, and I don't think it will have any impact on
performance as going back to the start of the file implies an
immediate seek. We'll have exactly the same number of seeks if we
switch writeback to another inode, and then come back to this one
later and restart from index 0.
#2a is pretty much "status quo without the deadlock". Moving the
retry loop up into the wcp caller means we can issue IO on the
pending pages before calling wcp again, and so avoid locking or
waiting on pages in the wrong order. I'm not convinced we need to do
this given that we get the same thing from #2 on the next writeback
call from the writeback infrastructure.
#3 is really just a band-aid - it doesn't fix the access/wait
inversion problem, just prevents it from becoming a deadlock
situation. I'd prefer we fix the inversion, not sweep it under the
carpet like this.
#3a is really an optimisation that just so happens to include the
band-aid fix of #3.
So it seems that the simplest way to fix this issue is to implement
solution #2
Link: http://lkml.kernel.org/r/20181005054526.21507-1-david@fromorbit.com Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Jan Kara <jack@suse.de> Cc: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
ARM64 has asm implementation of memchr(), memcmp(), str[r]chr(),
str[n]cmp(), str[n]len(). KASAN don't see memory accesses in asm code,
thus it can potentially miss many bugs.
Ifdef out __HAVE_ARCH_* defines of these functions when KASAN is enabled,
so the generic implementations from lib/string.c will be used.
We can't just remove the asm functions because efistub uses them. And we
can't have two non-weak functions either, so declare the asm functions as
weak.
Link: http://lkml.kernel.org/r/20180920135631.23833-2-aryabinin@virtuozzo.com Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Reported-by: Kyeongdon Kim <kyeongdon.kim@lge.com> Cc: Alexander Potapenko <glider@google.com> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
fs/ocfs2/file.c: In function ‘ocfs2_file_write_iter’:
./arch/sparc/include/asm/cmpxchg_64.h:55:22: warning: value computed is not used [-Wunused-value]
#define xchg(ptr,x) ((__typeof__(*(ptr)))__xchg((unsigned long)(x),(ptr),sizeof(*(ptr))))
and
drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c: In function ‘ixgbevf_xdp_setup’:
./arch/sparc/include/asm/cmpxchg_64.h:55:22: warning: value computed is not used [-Wunused-value]
#define xchg(ptr,x) ((__typeof__(*(ptr)))__xchg((unsigned long)(x),(ptr),sizeof(*(ptr))))
Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
Fix a bug introduced by the creation of flush_all_to_thread() for
processors that have SPE (Signal Processing Engine) and use it to
compute floating-point operations.
>From userspace perspective, the problem was seen in attempts of
computing floating-point operations which should generate exceptions.
For example:
fork();
float x = 0.0 / 0.0;
isnan(x); // forked process returns False (should be True)
The operation above also should always cause the SPEFSCR FINV bit to
be set. However, the SPE floating-point exceptions were turned off
after a fork().
Kernel versions prior to the bug used flush_spe_to_thread(), which
first saves SPEFSCR register values in tsk->thread and then calls
giveup_spe(tsk).
After commit 579e633e764e, the save_all() function was called first
to giveup_spe(), and then the SPEFSCR register values were saved in
tsk->thread. This would save the SPEFSCR register values after
disabling SPE for that thread, causing the bug described above.
Fixes 579e633e764e ("powerpc: create flush_all_to_thread()") Signed-off-by: Felipe Rechia <felipe.rechia@datacom.com.br> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
The dev_map_notification() removes interface in devmap if
unregistering interface's ifindex is same.
But only checking ifindex is not enough because other netns can have
same ifindex. so that wrong interface selection could occurred.
Hence netdev pointer comparison code is added.
v2: compare netdev pointer instead of using net_eq() (Daniel Borkmann)
v1: Initial patch
Fixes: 2ddf71e23cc2 ("net: add notifier hooks for devmap bpf map") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Acked-by: Song Liu <songliubraving@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
On r8a7791/koelsch, sometimes the following message is printed during
system suspend:
rcar_thermal e61f0000.thermal: thermal sensor was broken
This happens if the workqueue runs while the device is already
suspended. Fix this by using the freezable system workqueue instead,
cfr. commit 51e20d0e3a60cf46 ("thermal: Prevent polling from happening
during system suspend").
Test $comm in kprobe-event argument syntax testcase
only if it is supported on the kernel because
$comm has been introduced 4.8 kernel.
So on older stable kernel, it should be skipped.
IRQ wake up support for MAX8997 driver was initially configured by
respective property in pdata. However, after the driver conversion to
device-tree, setting it was left as 'todo'. Nowadays most of other PMIC MFD
drivers initialized from device-tree assume that they can be an irq wakeup
source, so enable it also for MAX8997. This fixes support for wakeup from
MAX8997 RTC alarm.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
Power button IRQ actually has a second level of interrupts to
distinguish between UI and POWER buttons. Moreover, current
implementation looks awkward in approach to handle second level IRQs by
first level related IRQ chip.
To address above issues, split power button IRQ to be chained as well.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
When trying to read any MC13892 ADC channel on a imx51-babbage board:
The MC13892 PMIC shutdowns completely.
After debugging this issue and comparing the MC13892 and MC13783
initializations done in the vendor kernel, it was noticed that the
CHRGRAWDIV bit of the ADC0 register was not being set.
This bit is set by default after power on, but the driver was
clearing it.
After setting this bit it is possible to read the ADC values correctly.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Tested-by: Chris Healy <cphealy@gmail.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
Don't call runtime_put_sync when clk32k_ref is ARIZONA_32KZ_MCLK2
as there is no corresponding runtime_get_sync call.
MCLK1 is not in the AoD power domain so if it is used as 32kHz clock
source we need to hold a runtime PM reference to keep the device from
going into low power mode.
Fixes: cdd8da8cc66b ("mfd: arizona: Add gating of external MCLKn clocks") Signed-off-by: Sapthagiri Baratam <sapthagiri.baratam@cirrus.com> Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
After flushing all mcast entries from the table, the ones contained in
mc list of ndev are not restored when promisc mode is toggled off,
because they are considered as synched with ALE, thus, in order to
restore them after promisc mode - reset syncing info. This fix
touches only switch mode devices, including single port boards
like Beagle Bone.
Fixes: commit 5da1948969bc
("net: ethernet: ti: cpsw: fix lost of mcast packets while rx_mode update")
Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
These functions are supposed to return one on failure and zero on
success. Returning a zero here could cause uninitialized variable
bugs in several of the callers. For example:
drivers/scsi/cxgbi/cxgb4i/cxgb4i.c:1660 get_iscsi_dcb_priority()
error: uninitialized symbol 'caps'.
Fixes: 48365e485275 ("qlcnic: dcb: Add support for CEE Netlink interface.") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
drivers/isdn/mISDN/tei.c:1193:7: warning: overflow converting case value
to switch condition type (2147764552 to 18446744071562348872) [-Wswitch]
case IMHOLD_L1:
^
drivers/isdn/mISDN/tei.c:1187:7: warning: overflow converting case value
to switch condition type (2147764550 to 18446744071562348870) [-Wswitch]
case IMCLEAR_L2:
^
2 warnings generated.
The root cause is that the _IOC macro can generate really large numbers,
which don't find into type int. My research into how GCC and Clang are
handling this at a low level didn't prove fruitful and surveying the
kernel tree shows that aside from here and a few places in the scsi
subsystem, everything that uses _IOC is at least of type 'unsigned int'.
Make that change here because as nothing in this function cares about
the signedness of the variable and it removes ambiguity, which is never
good when dealing with compilers.
While we're here, remove the unnecessary local variable ret (just return
-EINVAL and 0 directly).
Link: https://github.com/ClangBuiltLinux/linux/issues/67 Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
drivers/rtc/rtc-s35390a.c:124:27: warning: implicit conversion from
'int' to 'char' changes value from 192 to -64 [-Wconstant-conversion]
buf = S35390A_FLAG_RESET | S35390A_FLAG_24H;
~ ~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~
1 warning generated.
Update buf to be an unsigned 8-bit integer, which matches the buf member
in struct i2c_msg.
This patch exports the raw per-CPU VPA data via debugfs.
A per-CPU file is created which exports the VPA data of
that CPU to help debug some of the VPA related issues or
to analyze the per-CPU VPA related statistics.
v3: Removed offline CPU check.
v2: Included offline CPU check and other review comments.
Signed-off-by: Aravinda Prasad <aravinda@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
If PARPORT_PC_FIFO is not enabled, do not provide the dma lock
macros and lock definition. Otherwise:
./arch/sparc/include/asm/parport.h:24:24: warning: ‘dma_spin_lock’ defined but not used [-Wunused-variable]
static DEFINE_SPINLOCK(dma_spin_lock);
^~~~~~~~~~~~~
./include/linux/spinlock_types.h:81:39: note: in definition of macro ‘DEFINE_SPINLOCK’
#define DEFINE_SPINLOCK(x) spinlock_t x = __SPIN_LOCK_UNLOCKED(x)
Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
McSPI has 32 byte FIFO in Transmit-Receive mode. Current code tries to
configuration FIFO watermark level for DMA trigger to be GCD of transfer
length and max FIFO size which would mean trigger level may be set to 32
for transmit-receive mode if length is aligned. This does not work in
case of SPI slave mode where FIFO always needs to have data ready
whenever master starts the clock. With DMA trigger size of 32 there will
be a small window during slave TX where DMA is still putting data into
FIFO but master would have started clock for next byte, resulting in
shifting out of stale data. Similarly, on Slave RX side there may be RX
FIFO overflow
Fix this by setting FIFO watermark for DMA trigger to word
length. This means DMA is triggered as soon as FIFO has space for word
length bytes and DMA would make sure FIFO is almost always full
therefore improving FIFO occupancy in both master and slave mode.
Signed-off-by: Vignesh R <vigneshr@ti.com> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
Return an error when the function debug_register() fails allocating
the debug handle.
Also remove the registered debug handle when the initialization fails
later on.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com> Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
drivers/atm/zatm.c:513:7: error: while loop has empty body
[-Werror,-Wempty-body]
zwait;
^
drivers/atm/zatm.c:513:7: note: put the semicolon on a separate line to
silence this warning
Get rid of this warning by using an empty do-while loop. While we're at
it, add parentheses to make it clear that this is a function-like macro.
Link: https://github.com/ClangBuiltLinux/linux/issues/42 Suggested-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
Commits ffb6ca33b04b and e08ea3a96fc7 prevent setting xprt_min_resvport
greater than xprt_max_resvport, but may also break simple code that sets
one parameter then the other, if the new range does not overlap the old.
Also it looks racy to me, unless there's some serialization I'm not
seeing. Granted it would probably require malicious privileged processes
(unless there's a chance these might eventually be settable in unprivileged
containers), but still it seems better not to let userspace panic the
kernel.
Simpler seems to be to allow setting the parameters to whatever you want
but interpret xprt_min_resvport > xprt_max_resvport as the empty range.
Fixes: ffb6ca33b04b "sunrpc: Prevent resvport min/max inversion..." Fixes: e08ea3a96fc7 "sunrpc: Prevent rexvport min/max inversion..." Signed-off-by: J. Bruce Fields <bfields@redhat.com> Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
Currently the call to atoi is being passed a single char string
that is not null terminated, so there is a potential read overrun
along the stack when parsing for an integer value. Fix this by
instead using a 2 char string that is initialized to all zeros
to ensure that a 1 char read into the string is always terminated
with a \0.
Detected by cppcheck:
"Invalid atoi() argument nr 1. A nul-terminated string is required."
Fixes: 3391ba0e2792 ("usbip: tools: Extract generic code to be shared with vudc backend") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
Upon success the update_status handler returns a positive number
corresponding to the number of bytes transferred by usb_control_msg.
However the return code of the update_status handler should indicate if
an error occurred(negative) or how many bytes of the user's input to sysfs
that was consumed. Return code zero indicates all bytes were consumed.
The bug can for example result in the update_status handler being called
twice, the second time with only the "unconsumed" part of the user's input
to sysfs. Effectively setting an incorrect brightness.
Change the update_status handler to return zero for all successful
transactions and forward usb_control_msg's error code upon failure.
The VMD removal path calls pci_stop_root_busi(), which tears down the pcie
tree, including detaching all of the attached drivers. During driver
detachment, devices may use pci_release_region() to release resources.
This path relies on the resource being accessible in resource tree.
By detaching the child domain from the parent resource domain prior to
stopping the bus, we are preventing the list traversal from finding the
resource to be freed. If we instead detach the resource after stopping
the bus, we will have properly freed the resource and detaching is
simply accounting at that point.
Without this order, the resource is never freed and is orphaned on VMD
removal, leading to a warning:
[ 181.940162] Trying to free nonexistent resource <e5a10000-e5a13fff>
Fixes: 2c2c5c5cd213 ("x86/PCI: VMD: Attach VMD resources to parent domain's resource tree") Signed-off-by: Jon Derrick <jonathan.derrick@intel.com>
[lorenzo.pieralisi@arm.com: updated commit log] Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
Compiling with clang yields the following warning:
sound/i2c/cs8427.c:140:31: warning: implicit conversion from 'int'
to 'char' changes value from 160 to -96 [-Wconstant-conversion]
data[0] = CS8427_REG_AUTOINC | CS8427_REG_CORU_DATABUF;
~ ~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~
Because CS8427_REG_AUTOINC is defined as 128, it is too big for a
char field.
So change data from char to unsigned char, that it can hold the value.
This patch does not change the generated code.
Signed-off-by: Philipp Klocke <philipp97kl@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
A caller of pm_genpd_init() that provides some states for the genpd via the
->states pointer in the struct generic_pm_domain, should also provide a
governor. This because it's the job of the governor to pick a state that
satisfies the constraints.
Therefore, let's print a warning to inform the user about such bogus
configuration and avoid to bail out, by instead picking the shallowest
state before genpd invokes the ->power_off() callback.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Lina Iyer <ilina@codeaurora.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
Andy had some concerns about using regs_get_kernel_stack_nth() in a new
function regs_get_kernel_argument() as if there's any error in the stack
code, it could cause a bad memory access. To be on the safe side, call
probe_kernel_read() on the stack address to be extra careful in accessing
the memory. A helper function, regs_get_kernel_stack_nth_addr(), was added
to just return the stack address (or NULL if not on the stack), that will be
used to find the address (and could be used by other functions) and read the
address with kernel_probe_read().
Requested-by: Andy Lutomirski <luto@amacapital.net> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20181017165951.09119177@gandalf.local.home Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
When looking at a 4.18 based KASAN use after free report, I noticed
that racing xfs_buf_rele() may race on dropping the last reference
to the buffer and taking the buffer lock. This was the symptom
displayed by the KASAN report, but the actual issue that was
reported had already been fixed in 4.19-rc1 by commit e339dd8d8b04
("xfs: use sync buffer I/O for sync delwri queue submission").
Despite this, I think there is still an issue with xfs_buf_rele()
in this code:
release = atomic_dec_and_lock(&bp->b_hold, &pag->pag_buf_lock);
spin_lock(&bp->b_lock);
if (!release) {
.....
If two threads race on the b_lock after both dropping a reference
and one getting dropping the last reference so release = true, we
end up with:
CPU 0 CPU 1
atomic_dec_and_lock()
atomic_dec_and_lock()
spin_lock(&bp->b_lock)
spin_lock(&bp->b_lock)
<spins>
<release = true bp->b_lru_ref = 0>
<remove from lists>
freebuf = true
spin_unlock(&bp->b_lock)
xfs_buf_free(bp)
<gets lock, reading and writing freed memory>
<accesses freed memory>
spin_unlock(&bp->b_lock) <reads/writes freed memory>
IOWs, we can't safely take bp->b_lock after dropping the hold
reference because the buffer may go away at any time after we
drop that reference. However, this can be fixed simply by taking the
bp->b_lock before we drop the reference.
It is safe to nest the pag_buf_lock inside bp->b_lock as the
pag_buf_lock is only used to serialise against lookup in
xfs_buf_find() and no other locks are held over or under the
pag_buf_lock there. Make this clear by documenting the buffer lock
orders at the top of the file.
Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com Signed-off-by: Dave Chinner <david@fromorbit.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
This fixes the "'hash' may be used uninitialized in this function"
net/unix/af_unix.c:1041:20: warning: 'hash' may be used uninitialized in this function [-Wmaybe-uninitialized]
addr->hash = hash ^ sk->sk_type;
Signed-off-by: Kyeongdon Kim <kyeongdon.kim@lge.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
This is a fix for the port_set_speed method for the Topaz family.
Currently the same method is used as for the Peridot family, but
this is wrong for the SERDES port.
On Topaz, the SERDES port is port 5, not 9 and 10 as in Peridot.
Moreover setting alt_bit on Topaz only makes sense for port 0 (for
(differentiating 100mbps vs 200mbps). The SERDES port does not
support more than 2500mbps, so alt_bit does not make any difference.
Signed-off-by: Marek Behún <marek.behun@nic.cz> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
We need to transfer device ownership to the CPU before we can manipulate
the mapped data.
Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
We can't just transfer ownership to the CPU and then unmap, as this will
break with swiotlb.
Instead unmap the command and sense buffer a little earlier in the I/O
completion handler and get rid of the pci_dma_sync_sg_for_cpu call
entirely.
Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
The allocation for the audio pmc is using the size of struct clk_audio_pad
instead of struct clk_audio_pmc. This works fine because the former is
larger than the latter but it is safer to be correct.
Building with W=1 enables the compiler warning -Wimplicit-fallthrough=3. That
option does not recognize the fall-through comment in the fcloop driver. Add
a fall-through comment that is recognized for -Wimplicit-fallthrough=3. This
patch avoids that the compiler reports the following warning when building
with W=1:
drivers/nvme/target/fcloop.c:647:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
if (op == NVMET_FCOP_READDATA)
^
Signed-off-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: James Smart <james.smart@broadcom.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
Clang warns when one enumerated type is implicitly converted to another
and this happens in several locations in this driver, ultimately related
to the set_cipher_{mode,config0} functions. set_cipher_mode expects a mode
of type drv_cipher_mode and set_cipher_config0 expects a mode of type
drv_crypto_direction.
drivers/crypto/ccree/cc_ivgen.c:58:35: warning: implicit conversion from
enumeration type 'enum cc_desc_direction' to different enumeration type
'enum drv_crypto_direction' [-Wenum-conversion]
set_cipher_config0(&iv_seq[idx], DESC_DIRECTION_ENCRYPT_ENCRYPT);
drivers/crypto/ccree/cc_hash.c:99:28: warning: implicit conversion from
enumeration type 'enum cc_hash_conf_pad' to different enumeration type
'enum drv_crypto_direction' [-Wenum-conversion]
set_cipher_config0(desc, HASH_DIGEST_RESULT_LITTLE_ENDIAN);
drivers/crypto/ccree/cc_aead.c:1643:30: warning: implicit conversion
from enumeration type 'enum drv_hash_hw_mode' to different enumeration
type 'enum drv_cipher_mode' [-Wenum-conversion]
set_cipher_mode(&desc[idx], DRV_HASH_HW_GHASH);
Since this fundamentally isn't a problem because these values just
represent simple integers for a shift operation, make it clear to Clang
that this is okay by making the mode parameter in both functions an int.
Link: https://github.com/ClangBuiltLinux/linux/issues/46 Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Acked-by: Gilad Ben-Yossef <gilad@benyossef.com> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
Clang warns when one enumerated type is implicitly converted to another.
drivers/scsi/iscsi_tcp.c:803:15: warning: implicit conversion from
enumeration type 'enum iscsi_host_param' to different enumeration type
'enum iscsi_param' [-Wenum-conversion]
&addr, param, buf);
^~~~~
1 warning generated.
iscsi_conn_get_addr_param handles ISCSI_HOST_PARAM_IPADDRESS just fine
so add an explicit cast to iscsi_param to make it clear to Clang that
this is expected behavior.
Link: https://github.com/ClangBuiltLinux/linux/issues/153 Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
Clang warns when an enumerated type is implicitly converted to another.
drivers/scsi/isci/request.c:3476:13: warning: implicit conversion from
enumeration type 'enum sci_task_status' to different enumeration type
'enum sci_status' [-Wenum-conversion]
status = sci_controller_start_task(ihost,
~ ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/scsi/isci/host.c:2744:10: warning: implicit conversion from
enumeration type 'enum sci_status' to different enumeration type 'enum
sci_task_status' [-Wenum-conversion]
return SCI_SUCCESS;
~~~~~~ ^~~~~~~~~~~
drivers/scsi/isci/host.c:2753:9: warning: implicit conversion from
enumeration type 'enum sci_status' to different enumeration type 'enum
sci_task_status' [-Wenum-conversion]
return status;
~~~~~~ ^~~~~~
Avoid all of these implicit conversion by just making
sci_controller_start_task use sci_status. This silences
Clang and has no functional change since sci_task_status
has all of its values mapped to something in sci_status.
Link: https://github.com/ClangBuiltLinux/linux/issues/153 Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
Clang warns when one enumerated type is implicitly converted to another.
drivers/scsi/isci/request.c:1629:13: warning: implicit conversion from
enumeration type 'enum sci_io_status' to different enumeration type
'enum sci_status' [-Wenum-conversion]
status = SCI_IO_FAILURE_RESPONSE_VALID;
~ ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/scsi/isci/request.c:1631:12: warning: implicit conversion from
enumeration type 'enum sci_io_status' to different enumeration type
'enum sci_status' [-Wenum-conversion]
status = SCI_IO_FAILURE_RESPONSE_VALID;
~ ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
status is of type sci_status but SCI_IO_FAILURE_RESPONSE_VALID is of
type sci_io_status. Use SCI_FAILURE_IO_RESPONSE_VALID, which is from
sci_status and has SCI_IO_FAILURE_RESPONSE_VALID's exact value since
that is what SCI_IO_FAILURE_RESPONSE_VALID is mapped to in the isci.h
file.
Link: https://github.com/ClangBuiltLinux/linux/issues/153 Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
Register operand size of invvpid and invept instruction in 64-bit mode
has always 64 bits. Adjust inline function argument type to reflect
correct size.
Signed-off-by: Uros Bizjak <ubizjak@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
Reset the vm_{entry,exit}_controls_shadow variables as well as the
segment cache after loading a new VMCS in vmx_switch_vmcs(). The
shadows/cache track VMCS data, i.e. they're stale every time we
switch to a new VMCS regardless of reason.
This fixes a bug where stale control shadows would be consumed after
a nested VMExit due to a failed consistency check.
Suggested-by: Jim Mattson <jmattson@google.com> Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Reviewed-by: Jim Mattson <jmattson@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
Add missing break statement in order to prevent the code from falling
through to case TEST_UNIT_READY.
Addresses-Coverity-ID: 1357338 ("Missing break in switch") Suggested-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
Align the use of local PTT to propagate through the qed_mcp* API's.
Global ptt should not be used.
Register access should be done through layers. Register address is
mapped into a PTT, PF translation table. Several interface functions
require a PTT to direct read/write into register. There is a pool of
PTT maintained, and several PTT are used simultaneously to access
device registers in different flows. Same PTT should not be used in
flows that can run concurrently.
To avoid running out of PTT resources, too many PTT should not be
acquired without releasing them. Every PF has a global PTT, which is
used throughout the life of PF, in most important flows for register
access. Generic functions acquire the PTT locally and release after
the use. This patch aligns the use of Global PTT and Local PTT
accordingly.
Signed-off-by: Rahul Verma <rahul.verma@cavium.com> Signed-off-by: Ariel Elior <ariel.elior@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
The error handling in fd_probe_drives() doesn't clean up at all. Fix it
up in preparation for converting to blk-mq. While we're here, get rid of
the commented out amiga_floppy_remove().
According to the datasheet the update bit must be set if the on-time-div
or the base-unit changes.
Now that we properly order device resume on Cherry Trail so that the GFX0
_PS0 method no longer exits with an error, we end up with a sequence of
events where we are writing the same values twice in a row.
First the _PS0 method restores the duty cycle of 0% the GPU driver set
on suspend and then the GPU driver first updates just the enabled bit in
the pwm_state from 0 to 1, causing us to write the same values again,
before restoring the pre-suspend duty-cycle in a separate pwm_apply call.
When writing the update bit the second time, without changing any of
the values the update bit clears immediately / instantly, instead of
staying 1 for a while as usual. After this the next setting of the update
bit seems to be ignored, causing the restoring of the pre-suspend
duty-cycle to not get applied. This makes the backlight come up with
a 0% dutycycle after suspend/resume.
Any further brightness changes after this do work.
This commit moves the setting of the update bit into pwm_lpss_prepare()
and only sets the bit if we have actually changed any of the values.
This avoids the setting of the update bit the second time we configure
the PWM to 0% dutycycle, this fixes the backlight coming up with 0%
duty-cycle after a suspend/resume.
Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
If 'krealloc()' fails, 'pctl->functions' is set to NULL.
We should instead use a temp variable in order to be able to free the
previously allocated memeory, in case of OOM.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
IAD Register is yet readable trough the "iad" sys file.
A write to the "iad" sys file enables or disables the current
measurement, but it was not possible to get the measured value by
reading it.
Fix: %u in snprintf for unsigned values (vdd and vad)
Fix: Avoid possibles overflows (Usage of the 'count' variables)
In _scif_prog_signal(), the boolean variable 'x100' is used to indicate
whether the MIC Coprocessor is X100. If 'x100' is true, the status
descriptor will be used to write the value to the destination. Otherwise, a
DMA pool will be allocated for this purpose. Specifically, if the DMA pool
is allocated successfully, two memory addresses will be returned. One is
for the CPU and the other is for the device to access the DMA pool. The
former is stored to the variable 'status' and the latter is stored to the
variable 'src'. After the allocation, the address in 'src' is saved to
'status->src_dma_addr', which is actually in the DMA pool, and 'src' is
then modified.
Later on, if an error occurs, the execution flow will transfer to the label
'dma_fail', which will check 'x100' and free up the allocated DMA pool if
'x100' is false. The point here is that 'status->src_dma_addr' is used for
freeing up the DMA pool. As mentioned before, 'status->src_dma_addr' is in
the DMA pool. And thus, the device is able to modify this data. This can
potentially cause failures when freeing up the DMA pool because of the
modified device address.
This patch avoids the above issue by using the variable 'src' (with
necessary calculation) to free up the DMA pool.
Signed-off-by: Wenwen Wang <wang6495@umn.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
The sysfs handler should return the number of bytes consumed, which in the
case of a successful write is the entire buffer. Also fix a bug where
param.data_len was being set to (count - (2 * sizeof(u32))) instead of just
(count - sizeof(u32)). The latter is correct because we skip over the
leading u32 which is our param.type, but we were also incorrectly
subtracting sizeof(u32) on the line where we were actually setting
param.data_len:
param.data_len = count - sizeof(u32);
This meant that for our example event.kernel_software_watchdog with total
length 10 bytes, param.data_len was just 2 prior to this change.
To test, successfully append an event to the log with gsmi sysfs.
This sample event is for a "Kernel Software Watchdog"
> xxd -g 1 event.kernel_software_watchdog 0000000: 01 00 00 00 ad de 06 00 00 00
In btrfs_search_old_slot get_old_root is always used with the assumption
it cannot fail. However, this is not true in rare circumstance it can
fail and return null. This will lead to null point dereference when the
header is read. Fix this by checking the return value and properly
handling NULL by setting ret to -EIO and returning gracefully.
Coverity-id: 1087503 Signed-off-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: Lu Fengqi <lufq.fnst@cn.fujitsu.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
when msdc_cmd_is_ready return fail, the req_timeout work has not been
inited and cancel_delayed_work() will return false, then, the request
return directly and never call mmc_request_done().
so need call mod_delayed_work() before msdc_cmd_is_ready()
Since commit 9ec36cafe43b ("of/irq: do irq resolution in platform_get_irq")
platform_get_irq() can return -EPROBE_DEFER. However, the driver overrides
an error returned by that function with -ENOENT which breaks the deferred
probing. Propagate upstream an error code returned by platform_get_irq()
and remove the bogus "platform" from the error message, while at it...
Fixes: 9ec36cafe43b ("of/irq: do irq resolution in platform_get_irq") Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
We can't modify cdo->capability as it is defined as a const.
Change the modification hack to just WARN_ON_ONCE() if we hit
any of the invalid combinations.
This fixes a regression for pcd, which doesn't work after the
constify patch.
Fixes: 853fe1bf7554 ("cdrom: Make device operations read-only") Tested-by: Ondrej Zary <linux@rainbow-software.org> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
ath10k_pci_diag_write_mem may allocate big size of the dma memory
based on the parameter nbytes. Take firmware diag download as
example, the biggest size is about 500K. In some systems, the
allocation is likely to fail because it can't acquire such a large
contiguous dma memory.
The fix is to allocate a small size dma memory. In the loop,
driver copies the data to the allocated dma memory and writes to
the destination until all the data is written.
Tested with QCA6174 PCI with
firmware-6.bin_WLAN.RM.4.4.1-00119-QCARMSWP-1, this also affects
QCA9377 PCI.
Signed-off-by: Carl Huang <cjhuang@codeaurora.org> Reviewed-by: Brian Norris <briannorris@chomium.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
Beacons are not updated to reflect TIM changes. This is not compliant with
power-saving client stations as the beacons do not have valid TIM and can
cause the network to stall at random occasions and to have highly variable
latencies.
Fix it by updating beacon templates on mac80211 set_tim callback.
Addresses an issue described in:
https://marc.info/?i=20180911163534.21312d08%20()%20manjaro
Signed-off-by: Ali MJ Al-Nasrawy <alimjalnasrawy@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
eeh_add_to_parent_pe() sometimes removes the EEH_PE_KEEP flag, but it
incorrectly removes it from pe->type, instead of pe->state.
However, rather than clearing it from the correct field, remove it.
Inspection of the code shows that it can't ever have had any effect
(even if it had been cleared from the correct field), because the
field is never tested after it is cleared by the statement in
question.
The clear statement was added by commit 807a827d4e74 ("powerpc/eeh:
Keep PE during hotplug"), but it didn't explain why it was necessary.
Signed-off-by: Sam Bobroff <sbobroff@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
This will avoid auto-vectorisation when building with higher
optimisation levels.
We don't know if the machine can support VSX and even if it's present
it's probably not going to be enabled at this point in boot.
These flag were both added prior to GCC 4.6 which is the minimum
compiler version supported by upstream, thanks to Segher for the
details.
Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
The "count < sizeof(struct os_area_db)" comparison is type promoted to
size_t so negative values of "count" are treated as very high values
and we accidentally return success instead of a negative error code.
This doesn't really change runtime much but it fixes a static checker
warning.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Geoff Levand <geoff@infradead.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
Reservations in gfs can span multiple gfs2_bitmaps (but they won't span
multiple resource groups). When removing a reservation, we want to
clear the GBF_FULL flags of all involved gfs2_bitmaps, not just that of
the first bitmap.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com> Signed-off-by: Bob Peterson <rpeterso@redhat.com> Reviewed-by: Steven Whitehouse <swhiteho@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
NL80211_TX_POWER_LIMITED was treated as NL80211_TX_POWER_AUTOMATIC,
which is the opposite of what should happen and can cause nasty
regulatory problems.
if/else converted to a switch without default to make gcc warn
on unhandled enum values.
Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
This patch adds support for ALS on the Zenbook UX430UQ to the asus_nb_wmi
driver. It also renames "quirk_asus_ux330uak" to "quirk_asus_forceals"
because it is now used for more than one model of computer, and should
thus have a more general name.
Signed-off-by: Kiernan Hager <kah.listaddress@gmail.com>
[andy: massaged commit message, fixed indentation and commas in the code] Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
For pages with a mapping this should be done under the page lock
for the benefit of asynchronous memory errors who prefer a
consistent dirty state. This rule can be broken in some special
cases, but should be better not to.
Under those rules, it is only safe for us to use the plain set_page_dirty
calls for shmemfs/anonymous memory. Userptr may be used with real
mappings and so needs to use the locked version (set_page_dirty_lock).
However, following a try_to_unmap() we may want to remove the userptr and
so call put_pages(). However, try_to_unmap() acquires the page lock and
so we must avoid recursively locking the pages ourselves -- which means
that we cannot safely acquire the lock around set_page_dirty(). Since we
can't be sure of the lock, we have to risk skip dirtying the page, or
else risk calling set_page_dirty() without a lock and so risk fs
corruption.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=203317
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=112012 Fixes: 5cc9ed4b9a7a ("drm/i915: Introduce mapping of user pages into video memory (userptr) ioctl")
References: cb6d7c7dc7ff ("drm/i915/userptr: Acquire the page lock around set_page_dirty()")
References: 505a8ec7e11a ("Revert "drm/i915/userptr: Acquire the page lock around set_page_dirty()"")
References: 6dcc693bc57f ("ext4: warn when page is dirtied without buffers") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: stable@vger.kernel.org Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191111133205.11590-1-chris@chris-wilson.co.uk
(cherry picked from commit 0d4bbe3d407f79438dc4f87943db21f7134cfc65) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
(cherry picked from commit cee7fb437edcdb2f9f8affa959e274997f5dca4d) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
It's possible to hit the WARN_ON_ONCE(page_mapped(page)) in
remove_stable_node() when it races with __mmput() and squeezes in
between ksm_exit() and exit_mmap().
WARNING: CPU: 0 PID: 3295 at mm/ksm.c:888 remove_stable_node+0x10c/0x150
Commit 56e94ea132bb ("fs: ocfs2: fix possible null-pointer dereferences
in ocfs2_xa_prepare_entry()") introduces a regression that fail to
create directory with mount option user_xattr and acl. Actually the
reported NULL pointer dereference case can be correctly handled by
loc->xl_ops->xlo_add_entry(), so revert it.
Link: http://lkml.kernel.org/r/1573624916-83825-1-git-send-email-joseph.qi@linux.alibaba.com Fixes: 56e94ea132bb ("fs: ocfs2: fix possible null-pointer dereferences in ocfs2_xa_prepare_entry()") Signed-off-by: Joseph Qi <joseph.qi@linux.alibaba.com> Reported-by: Thomas Voegtle <tv@lio96.de> Acked-by: Changwei Ge <gechangwei@live.cn> Cc: Jia-Ju Bai <baijiaju1990@gmail.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Gang He <ghe@suse.com> Cc: Jun Piao <piaojun@huawei.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
This happens because buffers for the in_vq are allocated when the port is
added but are not released when the port is unplugged.
They are only released when virtconsole is removed (see a7a69ec0d8e4)
To avoid the problem and to be symmetric, we could allocate all the buffers
in init_vqs() as they are released in remove_vqs(), but it sounds like
a waste of memory.
Rather than that, this patch changes add_port() logic to ignore ENOSPC
error in fill_queue(), which means queue has already been filled.
Fixes: a7a69ec0d8e4 ("virtio_console: free buffers after reset") Cc: mst@redhat.com Cc: stable@vger.kernel.org Signed-off-by: Laurent Vivier <lvivier@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
When converting milliseconds to microseconds in commit fffa6af94894
("gpio: max77620: Use correct unit for debounce times") some ~1 ms gaps
were introduced between the various ranges supported by the controller.
Fix this by changing the start of each range to the value immediately
following the end of the previous range. This way a debounce time of,
say 8250 us will translate into 16 ms instead of returning an -EINVAL
error.
Typically the debounce delay is only ever set through device tree and
specified in milliseconds, so we can never really hit this issue because
debounce times are always a multiple of 1000 us.
The only notable exception for this is drivers/mmc/host/mmc-spi.c where
the CD GPIO is requested, which passes a 1 us debounce time. According
to a comment preceeding that code this should actually be 1 ms (i.e.
1000 us).
Reported-by: Pavel Machek <pavel@denx.de> Signed-off-by: Thierry Reding <treding@nvidia.com> Acked-by: Pavel Machek <pavel@denx.de> Cc: <stable@vger.kernel.org> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
If the packets to sent to the guest are bigger than the buffer
available, we can split them, using multiple buffers and fixing
the length in the packet header.
This is safe since virtio-vsock supports only stream sockets.
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
when configuring act_pedit rules, the number of keys is validated only on
addition of a new entry. This is not sufficient to avoid hitting a WARN()
in the traffic path: for example, it is possible to replace a valid entry
with a new one having 0 extended keys, thus causing splats in dmesg like:
Array mlxfw_fsm_state_err_str contains value to string translation, when
values are provided by mlxfw_dev. If value is larger than
MLXFW_FSM_STATE_ERR_MAX, return "unknown error" as expected instead of
reading an address than exceed array size.
Fixes: 410ed13cae39 ("Add the mlxfw module for Mellanox firmware flash process") Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
projects / mirror_ubuntu-bionic-kernel.git / log