.sp
.LP
The following features are supported on this system:
+
+.sp
+.ne 2
+.na
+\fB\fBallocation_classes\fR\fR
+.ad
+.RS 4n
+.TS
+l l .
+GUID org.zfsonlinux:allocation_classes
+READ\-ONLY COMPATIBLE yes
+DEPENDENCIES none
+.TE
+
+This feature enables support for separate allocation classes.
+
+This feature becomes \fBactive\fR when a dedicated allocation class vdev
+(dedup or special) is created with the \fBzpool create\fR or \fBzpool add\fR
+subcommands. With device removal, it can be returned to the \fBenabled\fR
+state if all the dedicated allocation class vdevs are removed.
+.RE
+
.sp
.ne 2
.na
.sp
.ne 2
.na
-\fB\fBempty_bpobj\fR\fR
+\fB\fBbookmarks\fR\fR
.ad
.RS 4n
.TS
l l .
-GUID com.delphix:empty_bpobj
+GUID com.delphix:bookmarks
READ\-ONLY COMPATIBLE yes
-DEPENDENCIES none
+DEPENDENCIES extensible_dataset
.TE
-This feature increases the performance of creating and using a large
-number of snapshots of a single filesystem or volume, and also reduces
-the disk space required.
+This feature enables use of the \fBzfs bookmark\fR subcommand.
-When there are many snapshots, each snapshot uses many Block Pointer
-Objects (bpobj's) to track blocks associated with that snapshot.
-However, in common use cases, most of these bpobj's are empty. This
-feature allows us to create each bpobj on-demand, thus eliminating the
-empty bpobjs.
+This feature is \fBactive\fR while any bookmarks exist in the pool.
+All bookmarks in the pool can be listed by running
+\fBzfs list -t bookmark -r \fIpoolname\fR\fR.
+.RE
-This feature is \fBactive\fR while there are any filesystems, volumes,
-or snapshots which were created after enabling this feature.
+.sp
+.ne 2
+.na
+\fB\fBbookmark_v2\fR\fR
+.ad
+.RS 4n
+.TS
+l l .
+GUID com.datto:bookmark_v2
+READ\-ONLY COMPATIBLE no
+DEPENDENCIES bookmark, extensible_dataset
+.TE
+
+This feature enables the creation and management of larger bookmarks which are
+needed for other features in ZFS.
+
+This feature becomes \fBactive\fR when a v2 bookmark is created and will be
+returned to the \fBenabled\fR state when all v2 bookmarks are destroyed.
.RE
.sp
.ne 2
.na
-\fB\fBfilesystem_limits\fR\fR
+\fB\fBdevice_removal\fR\fR
.ad
.RS 4n
.TS
l l .
-GUID com.joyent:filesystem_limits
-READ\-ONLY COMPATIBLE yes
+GUID com.delphix:device_removal
+READ\-ONLY COMPATIBLE no
+DEPENDENCIES none
+.TE
+
+This feature enables the \fBzpool remove\fR subcommand to remove top-level
+vdevs, evacuating them to reduce the total size of the pool.
+
+This feature becomes \fBactive\fR when the \fBzpool remove\fR subcommand is used
+on a top-level vdev, and will never return to being \fBenabled\fR.
+.RE
+
+.sp
+.ne 2
+.na
+\fB\fBedonr\fR\fR
+.ad
+.RS 4n
+.TS
+l l .
+GUID org.illumos:edonr
+READ\-ONLY COMPATIBLE no
DEPENDENCIES extensible_dataset
.TE
-This feature enables filesystem and snapshot limits. These limits can be used
-to control how many filesystems and/or snapshots can be created at the point in
-the tree on which the limits are set.
+This feature enables the use of the Edon-R hash algorithm for checksum,
+including for nopwrite (if compression is also enabled, an overwrite of
+a block whose checksum matches the data being written will be ignored).
+In an abundance of caution, Edon-R requires verification when used with
+dedup: \fBzfs set dedup=edonr,verify\fR. See \fBzfs\fR(8).
-This feature is \fBactive\fR once either of the limit properties has been
-set on a dataset. Once activated the feature is never deactivated.
+Edon-R is a very high-performance hash algorithm that was part
+of the NIST SHA-3 competition. It provides extremely high hash
+performance (over 350% faster than SHA-256), but was not selected
+because of its unsuitability as a general purpose secure hash algorithm.
+This implementation utilizes the new salted checksumming functionality
+in ZFS, which means that the checksum is pre-seeded with a secret
+256-bit random key (stored on the pool) before being fed the data block
+to be checksummed. Thus the produced checksums are unique to a given
+pool.
+
+When the \fBedonr\fR feature is set to \fBenabled\fR, the administrator
+can turn on the \fBedonr\fR checksum on any dataset using the
+\fBzfs set checksum=edonr\fR. See zfs(8). This feature becomes
+\fBactive\fR once a \fBchecksum\fR property has been set to \fBedonr\fR,
+and will return to being \fBenabled\fR once all filesystems that have
+ever had their checksum set to \fBedonr\fR are destroyed.
+
+The \fBedonr\fR feature is not supported by GRUB and must not be used on
+the pool if GRUB needs to access the pool (e.g. for /boot).
.RE
.sp
.ne 2
.na
-\fB\fBlz4_compress\fR\fR
+\fB\fBembedded_data\fR\fR
.ad
.RS 4n
.TS
l l .
-GUID org.illumos:lz4_compress
+GUID com.delphix:embedded_data
READ\-ONLY COMPATIBLE no
DEPENDENCIES none
.TE
-\fBlz4\fR is a high-performance real-time compression algorithm that
-features significantly faster compression and decompression as well as a
-higher compression ratio than the older \fBlzjb\fR compression.
-Typically, \fBlz4\fR compression is approximately 50% faster on
-compressible data and 200% faster on incompressible data than
-\fBlzjb\fR. It is also approximately 80% faster on decompression, while
-giving approximately 10% better compression ratio.
-
-When the \fBlz4_compress\fR feature is set to \fBenabled\fR, the
-administrator can turn on \fBlz4\fR compression on any dataset on the
-pool using the zfs(8) command. Please note that doing so will
-immediately activate the \fBlz4_compress\fR feature on the underlying
-pool using the zfs(8) command. Also, all newly written metadata
-will be compressed with \fBlz4\fR algorithm. Since this feature is not
-read-only compatible, this operation will render the pool unimportable
-on systems without support for the \fBlz4_compress\fR feature.
+This feature improves the performance and compression ratio of
+highly-compressible blocks. Blocks whose contents can compress to 112 bytes
+or smaller can take advantage of this feature.
-Booting off of \fBlz4\fR-compressed root pools is supported.
+When this feature is enabled, the contents of highly-compressible blocks are
+stored in the block "pointer" itself (a misnomer in this case, as it contains
+the compressed data, rather than a pointer to its location on disk). Thus
+the space of the block (one sector, typically 512 bytes or 4KB) is saved,
+and no additional i/o is needed to read and write the data block.
This feature becomes \fBactive\fR as soon as it is enabled and will
-never return to being \fBenabled\fB.
+never return to being \fBenabled\fR.
.RE
.sp
.ne 2
.na
-\fB\fBspacemap_histogram\fR\fR
+\fB\fBempty_bpobj\fR\fR
.ad
.RS 4n
.TS
l l .
-GUID com.delphix:spacemap_histogram
+GUID com.delphix:empty_bpobj
READ\-ONLY COMPATIBLE yes
DEPENDENCIES none
.TE
-This features allows ZFS to maintain more information about how free space
-is organized within the pool. If this feature is \fBenabled\fR, ZFS will
-set this feature to \fBactive\fR when a new space map object is created or
-an existing space map is upgraded to the new format. Once the feature is
-\fBactive\fR, it will remain in that state until the pool is destroyed.
+This feature increases the performance of creating and using a large
+number of snapshots of a single filesystem or volume, and also reduces
+the disk space required.
+
+When there are many snapshots, each snapshot uses many Block Pointer
+Objects (bpobj's) to track blocks associated with that snapshot.
+However, in common use cases, most of these bpobj's are empty. This
+feature allows us to create each bpobj on-demand, thus eliminating the
+empty bpobjs.
+
+This feature is \fBactive\fR while there are any filesystems, volumes,
+or snapshots which were created after enabling this feature.
.RE
.sp
.ne 2
.na
-\fB\fBmulti_vdev_crash_dump\fR\fR
+\fB\fBenabled_txg\fR\fR
.ad
.RS 4n
.TS
l l .
-GUID com.joyent:multi_vdev_crash_dump
-READ\-ONLY COMPATIBLE no
+GUID com.delphix:enabled_txg
+READ\-ONLY COMPATIBLE yes
DEPENDENCIES none
.TE
-This feature allows a dump device to be configured with a pool comprised
-of multiple vdevs. Those vdevs may be arranged in any mirrored or raidz
-configuration.
-
-When the \fBmulti_vdev_crash_dump\fR feature is set to \fBenabled\fR,
-the administrator can use the \fBdumpadm\fR(1M) command to configure a
-dump device on a pool comprised of multiple vdevs.
+Once this feature is enabled ZFS records the transaction group number
+in which new features are enabled. This has no user-visible impact,
+but other features may depend on this feature.
-Under Linux this feature is registered for compatibility but not used.
-New pools created under Linux will have the feature \fBenabled\fR but
-will never transition to \fB\fBactive\fR. This functionality is not
-required in order to support crash dumps under Linux. Existing pools
-where this feature is \fB\fBactive\fR can be imported.
+This feature becomes \fBactive\fR as soon as it is enabled and will
+never return to being \fBenabled\fB.
.RE
.sp
.ne 2
.na
-\fB\fBextensible_dataset\fR\fR
+\fB\fBencryption\fR\fR
.ad
.RS 4n
.TS
l l .
-GUID com.delphix:extensible_dataset
+GUID com.datto:encryption
READ\-ONLY COMPATIBLE no
-DEPENDENCIES none
+DEPENDENCIES bookmark_v2, extensible_dataset
.TE
-This feature allows more flexible use of internal ZFS data structures,
-and exists for other features to depend on.
+This feature enables the creation and management of natively encrypted datasets.
-This feature will be \fBactive\fR when the first dependent feature uses it,
-and will be returned to the \fBenabled\fR state when all datasets that use
-this feature are destroyed.
+This feature becomes \fBactive\fR when an encrypted dataset is created and will
+be returned to the \fBenabled\fR state when all datasets that use this feature
+are destroyed.
.RE
.sp
.ne 2
.na
-\fB\fBbookmarks\fR\fR
+\fB\fBextensible_dataset\fR\fR
.ad
.RS 4n
.TS
l l .
-GUID com.delphix:bookmarks
-READ\-ONLY COMPATIBLE yes
-DEPENDENCIES extensible_dataset
+GUID com.delphix:extensible_dataset
+READ\-ONLY COMPATIBLE no
+DEPENDENCIES none
.TE
-This feature enables use of the \fBzfs bookmark\fR subcommand.
+This feature allows more flexible use of internal ZFS data structures,
+and exists for other features to depend on.
-This feature is \fBactive\fR while any bookmarks exist in the pool.
-All bookmarks in the pool can be listed by running
-\fBzfs list -t bookmark -r \fIpoolname\fR\fR.
+This feature will be \fBactive\fR when the first dependent feature uses it,
+and will be returned to the \fBenabled\fR state when all datasets that use
+this feature are destroyed.
.RE
.sp
.ne 2
.na
-\fB\fBenabled_txg\fR\fR
+\fB\fBfilesystem_limits\fR\fR
.ad
.RS 4n
.TS
l l .
-GUID com.delphix:enabled_txg
+GUID com.joyent:filesystem_limits
READ\-ONLY COMPATIBLE yes
-DEPENDENCIES none
+DEPENDENCIES extensible_dataset
.TE
-Once this feature is enabled ZFS records the transaction group number
-in which new features are enabled. This has no user-visible impact,
-but other features may depend on this feature.
+This feature enables filesystem and snapshot limits. These limits can be used
+to control how many filesystems and/or snapshots can be created at the point in
+the tree on which the limits are set.
-This feature becomes \fBactive\fR as soon as it is enabled and will
-never return to being \fBenabled\fB.
+This feature is \fBactive\fR once either of the limit properties has been
+set on a dataset. Once activated the feature is never deactivated.
.RE
.sp
.sp
.ne 2
.na
-\fB\fBembedded_data\fR\fR
+\fB\fBlarge_blocks\fR\fR
.ad
.RS 4n
.TS
l l .
-GUID com.delphix:embedded_data
+GUID org.open-zfs:large_blocks
READ\-ONLY COMPATIBLE no
-DEPENDENCIES none
+DEPENDENCIES extensible_dataset
.TE
-This feature improves the performance and compression ratio of
-highly-compressible blocks. Blocks whose contents can compress to 112 bytes
-or smaller can take advantage of this feature.
-
-When this feature is enabled, the contents of highly-compressible blocks are
-stored in the block "pointer" itself (a misnomer in this case, as it contains
-the compressed data, rather than a pointer to its location on disk). Thus
-the space of the block (one sector, typically 512 bytes or 4KB) is saved,
-and no additional i/o is needed to read and write the data block.
+The \fBlarge_block\fR feature allows the record size on a dataset to be
+set larger than 128KB.
-This feature becomes \fBactive\fR as soon as it is enabled and will
-never return to being \fBenabled\fR.
+This feature becomes \fBactive\fR once a dataset contains a file with
+a block size larger than 128KB, and will return to being \fBenabled\fR once all
+filesystems that have ever had their recordsize larger than 128KB are destroyed.
.RE
.sp
.ne 2
.na
-\fB\fBdevice_removal\fR\fR
+\fB\fBlarge_dnode\fR\fR
.ad
.RS 4n
.TS
l l .
-GUID com.delphix:device_removal
+GUID org.zfsonlinux:large_dnode
READ\-ONLY COMPATIBLE no
-DEPENDENCIES none
+DEPENDENCIES extensible_dataset
.TE
-This feature enables the \fBzpool remove\fR subcommand to remove top-level
-vdevs, evacuating them to reduce the total size of the pool.
+The \fBlarge_dnode\fR feature allows the size of dnodes in a dataset to be
+set larger than 512B.
-This feature becomes \fBactive\fR when the \fBzpool remove\fR subcommand is used
-on a top-level vdev, and will never return to being \fBenabled\fR.
+This feature becomes \fBactive\fR once a dataset contains an object with
+a dnode larger than 512B, which occurs as a result of setting the
+\fBdnodesize\fR dataset property to a value other than \fBlegacy\fR. The
+feature will return to being \fBenabled\fR once all filesystems that
+have ever contained a dnode larger than 512B are destroyed. Large dnodes
+allow more data to be stored in the bonus buffer, thus potentially
+improving performance by avoiding the use of spill blocks.
.RE
.sp
.ne 2
.na
-\fB\fBobsolete_counts\fR\fR
+\fB\fBlz4_compress\fR\fR
.ad
.RS 4n
.TS
l l .
-GUID com.delphix:obsolete_counts
-READ\-ONLY COMPATIBLE yes
-DEPENDENCIES device_removal
+GUID org.illumos:lz4_compress
+READ\-ONLY COMPATIBLE no
+DEPENDENCIES none
.TE
-This feature is an enhancement of device_removal, which will over time
-reduce the memory used to track removed devices. When indirect blocks
-are freed or remapped, we note that their part of the indirect mapping
-is "obsolete", i.e. no longer needed.
+\fBlz4\fR is a high-performance real-time compression algorithm that
+features significantly faster compression and decompression as well as a
+higher compression ratio than the older \fBlzjb\fR compression.
+Typically, \fBlz4\fR compression is approximately 50% faster on
+compressible data and 200% faster on incompressible data than
+\fBlzjb\fR. It is also approximately 80% faster on decompression, while
+giving approximately 10% better compression ratio.
-This feature becomes \fBactive\fR when the \fBzpool remove\fR subcommand is
-used on a top-level vdev, and will never return to being \fBenabled\fR.
+When the \fBlz4_compress\fR feature is set to \fBenabled\fR, the
+administrator can turn on \fBlz4\fR compression on any dataset on the
+pool using the zfs(8) command. Please note that doing so will
+immediately activate the \fBlz4_compress\fR feature on the underlying
+pool using the zfs(8) command. Also, all newly written metadata
+will be compressed with \fBlz4\fR algorithm. Since this feature is not
+read-only compatible, this operation will render the pool unimportable
+on systems without support for the \fBlz4_compress\fR feature.
+
+Booting off of \fBlz4\fR-compressed root pools is supported.
+
+This feature becomes \fBactive\fR as soon as it is enabled and will
+never return to being \fBenabled\fB.
.RE
.sp
.ne 2
.na
-\fB\fBzpool_checkpoint\fR\fR
+\fB\fBmulti_vdev_crash_dump\fR\fR
.ad
.RS 4n
.TS
l l .
-GUID com.delphix:zpool_checkpoint
-READ\-ONLY COMPATIBLE yes
+GUID com.joyent:multi_vdev_crash_dump
+READ\-ONLY COMPATIBLE no
DEPENDENCIES none
.TE
-This feature enables the \fBzpool checkpoint\fR subcommand that can
-checkpoint the state of the pool at the time it was issued and later
-rewind back to it or discard it.
+This feature allows a dump device to be configured with a pool comprised
+of multiple vdevs. Those vdevs may be arranged in any mirrored or raidz
+configuration.
-This feature becomes \fBactive\fR when the \fBzpool checkpoint\fR subcommand
-is used to checkpoint the pool.
-The feature will only return back to being \fBenabled\fR when the pool
-is rewound or the checkpoint has been discarded.
+When the \fBmulti_vdev_crash_dump\fR feature is set to \fBenabled\fR,
+the administrator can use the \fBdumpadm\fR(1M) command to configure a
+dump device on a pool comprised of multiple vdevs.
+
+Under Linux this feature is registered for compatibility but not used.
+New pools created under Linux will have the feature \fBenabled\fR but
+will never transition to \fB\fBactive\fR. This functionality is not
+required in order to support crash dumps under Linux. Existing pools
+where this feature is \fB\fBactive\fR can be imported.
.RE
.sp
.ne 2
.na
-\fB\fBspacemap_v2\fR\fR
+\fB\fBobsolete_counts\fR\fR
.ad
.RS 4n
.TS
l l .
-GUID com.delphix:spacemap_v2
+GUID com.delphix:obsolete_counts
READ\-ONLY COMPATIBLE yes
-DEPENDENCIES none
+DEPENDENCIES device_removal
.TE
-This feature enables the use of the new space map encoding which
-consists of two words (instead of one) whenever it is advantageous.
-The new encoding allows space maps to represent large regions of
-space more efficiently on-disk while also increasing their maximum
-addressable offset.
+This feature is an enhancement of device_removal, which will over time
+reduce the memory used to track removed devices. When indirect blocks
+are freed or remapped, we note that their part of the indirect mapping
+is "obsolete", i.e. no longer needed.
-This feature becomes \fBactive\fR once it is \fBenabled\fR, and never
-returns back to being \fBenabled\fR.
+This feature becomes \fBactive\fR when the \fBzpool remove\fR subcommand is
+used on a top-level vdev, and will never return to being \fBenabled\fR.
.RE
.sp
.ne 2
.na
-\fB\fBlarge_blocks\fR\fR
+\fB\fBproject_quota\fR\fR
.ad
.RS 4n
.TS
l l .
-GUID org.open-zfs:large_blocks
-READ\-ONLY COMPATIBLE no
+GUID org.zfsonlinux:project_quota
+READ\-ONLY COMPATIBLE yes
DEPENDENCIES extensible_dataset
.TE
-The \fBlarge_block\fR feature allows the record size on a dataset to be
-set larger than 128KB.
+This feature allows administrators to account the spaces and objects usage
+information against the project identifier (ID).
-This feature becomes \fBactive\fR once a dataset contains a file with
-a block size larger than 128KB, and will return to being \fBenabled\fR once all
-filesystems that have ever had their recordsize larger than 128KB are destroyed.
+The project ID is new object-based attribute. When upgrading an existing
+filesystem, object without project ID attribute will be assigned a zero
+project ID. After this feature is enabled, newly created object will inherit
+its parent directory's project ID if the parent inherit flag is set (via
+\fBchattr +/-P\fR or \fBzfs project [-s|-C]\fR). Otherwise, the new object's
+project ID will be set as zero. An object's project ID can be changed at
+anytime by the owner (or privileged user) via \fBchattr -p $prjid\fR or
+\fBzfs project -p $prjid\fR.
+
+This feature will become \fBactive\fR as soon as it is enabled and will never
+return to being \fBdisabled\fR. Each filesystem will be upgraded automatically
+when remounted or when new file is created under that filesystem. The upgrade
+can also be triggered on filesystems via `zfs set version=current <pool/fs>`.
+The upgrade process runs in the background and may take a while to complete
+for the filesystems containing a large number of files.
.RE
.sp
.ne 2
.na
-\fB\fBlarge_dnode\fR\fR
+\fB\fBresilver_defer\fR\fR
.ad
.RS 4n
.TS
l l .
-GUID org.zfsonlinux:large_dnode
-READ\-ONLY COMPATIBLE no
-DEPENDENCIES extensible_dataset
+GUID com.datto:resilver_defer
+READ\-ONLY COMPATIBLE yes
+DEPENDENCIES none
.TE
-The \fBlarge_dnode\fR feature allows the size of dnodes in a dataset to be
-set larger than 512B.
+This feature allows zfs to postpone new resilvers if an existing one is already
+in progress. Without this feature, any new resilvers will cause the currently
+running one to be immediately restarted from the beginning.
-This feature becomes \fBactive\fR once a dataset contains an object with
-a dnode larger than 512B, which occurs as a result of setting the
-\fBdnodesize\fR dataset property to a value other than \fBlegacy\fR. The
-feature will return to being \fBenabled\fR once all filesystems that
-have ever contained a dnode larger than 512B are destroyed. Large dnodes
-allow more data to be stored in the bonus buffer, thus potentially
-improving performance by avoiding the use of spill blocks.
+This feature becomes \fBactive\fR once a resilver has been deferred, and
+returns to being \fBenabled\fR when the deferred resilver begins.
.RE
.sp
.sp
.ne 2
.na
-\fB\fBedonr\fR\fR
+\fB\fBspacemap_histogram\fR\fR
.ad
.RS 4n
.TS
l l .
-GUID org.illumos:edonr
-READ\-ONLY COMPATIBLE no
-DEPENDENCIES extensible_dataset
+GUID com.delphix:spacemap_histogram
+READ\-ONLY COMPATIBLE yes
+DEPENDENCIES none
.TE
-This feature enables the use of the Edon-R hash algorithm for checksum,
-including for nopwrite (if compression is also enabled, an overwrite of
-a block whose checksum matches the data being written will be ignored).
-In an abundance of caution, Edon-R requires verification when used with
-dedup: \fBzfs set dedup=edonr,verify\fR. See \fBzfs\fR(8).
+This features allows ZFS to maintain more information about how free space
+is organized within the pool. If this feature is \fBenabled\fR, ZFS will
+set this feature to \fBactive\fR when a new space map object is created or
+an existing space map is upgraded to the new format. Once the feature is
+\fBactive\fR, it will remain in that state until the pool is destroyed.
+.RE
-Edon-R is a very high-performance hash algorithm that was part
-of the NIST SHA-3 competition. It provides extremely high hash
-performance (over 350% faster than SHA-256), but was not selected
-because of its unsuitability as a general purpose secure hash algorithm.
-This implementation utilizes the new salted checksumming functionality
-in ZFS, which means that the checksum is pre-seeded with a secret
-256-bit random key (stored on the pool) before being fed the data block
-to be checksummed. Thus the produced checksums are unique to a given
-pool.
+.sp
+.ne 2
+.na
+\fB\fBspacemap_v2\fR\fR
+.ad
+.RS 4n
+.TS
+l l .
+GUID com.delphix:spacemap_v2
+READ\-ONLY COMPATIBLE yes
+DEPENDENCIES none
+.TE
-When the \fBedonr\fR feature is set to \fBenabled\fR, the administrator
-can turn on the \fBedonr\fR checksum on any dataset using the
-\fBzfs set checksum=edonr\fR. See zfs(8). This feature becomes
-\fBactive\fR once a \fBchecksum\fR property has been set to \fBedonr\fR,
-and will return to being \fBenabled\fR once all filesystems that have
-ever had their checksum set to \fBedonr\fR are destroyed.
+This feature enables the use of the new space map encoding which
+consists of two words (instead of one) whenever it is advantageous.
+The new encoding allows space maps to represent large regions of
+space more efficiently on-disk while also increasing their maximum
+addressable offset.
-The \fBedonr\fR feature is not supported by GRUB and must not be used on
-the pool if GRUB needs to access the pool (e.g. for /boot).
+This feature becomes \fBactive\fR once it is \fBenabled\fR, and never
+returns back to being \fBenabled\fR.
.RE
.sp
.sp
.ne 2
.na
-\fB\fBbookmark_v2\fR\fR
-.ad
-.RS 4n
-.TS
-l l .
-GUID com.datto:bookmark_v2
-READ\-ONLY COMPATIBLE no
-DEPENDENCIES bookmark, extensible_dataset
-.TE
-
-This feature enables the creation and management of larger bookmarks which are
-needed for other features in ZFS.
-
-This feature becomes \fBactive\fR when a v2 bookmark is created and will be
-returned to the \fBenabled\fR state when all v2 bookmarks are destroyed.
-.RE
-
-.sp
-.ne 2
-.na
-\fB\fBencryption\fR\fR
-.ad
-.RS 4n
-.TS
-l l .
-GUID com.datto:encryption
-READ\-ONLY COMPATIBLE no
-DEPENDENCIES bookmark_v2, extensible_dataset
-.TE
-
-This feature enables the creation and management of natively encrypted datasets.
-
-This feature becomes \fBactive\fR when an encrypted dataset is created and will
-be returned to the \fBenabled\fR state when all datasets that use this feature
-are destroyed.
-.RE
-
-.sp
-.ne 2
-.na
-\fB\fBproject_quota\fR\fR
-.ad
-.RS 4n
-.TS
-l l .
-GUID org.zfsonlinux:project_quota
-READ\-ONLY COMPATIBLE yes
-DEPENDENCIES extensible_dataset
-.TE
-
-This feature allows administrators to account the spaces and objects usage
-information against the project identifier (ID).
-
-The project ID is new object-based attribute. When upgrading an existing
-filesystem, object without project ID attribute will be assigned a zero
-project ID. After this feature is enabled, newly created object will inherit
-its parent directory's project ID if the parent inherit flag is set (via
-\fBchattr +/-P\fR or \fBzfs project [-s|-C]\fR). Otherwise, the new object's
-project ID will be set as zero. An object's project ID can be changed at
-anytime by the owner (or privileged user) via \fBchattr -p $prjid\fR or
-\fBzfs project -p $prjid\fR.
-
-This feature will become \fBactive\fR as soon as it is enabled and will never
-return to being \fBdisabled\fR. Each filesystem will be upgraded automatically
-when remounted or when new file is created under that filesystem. The upgrade
-can also be triggered on filesystems via `zfs set version=current <pool/fs>`.
-The upgrade process runs in the background and may take a while to complete
-for the filesystems containing a large number of files.
-.RE
-
-.sp
-.ne 2
-.na
-\fB\fBresilver_defer\fR\fR
-.ad
-.RS 4n
-.TS
-l l .
-GUID com.datto:resilver_defer
-READ\-ONLY COMPATIBLE yes
-DEPENDENCIES none
-.TE
-
-This feature allows zfs to postpone new resilvers if an existing one is already
-in progress. Without this feature, any new resilvers will cause the currently
-running one to be immediately restarted from the beginning.
-
-This feature becomes \fBactive\fR once a resilver has been deferred, and
-returns to being \fBenabled\fR when the deferred resilver begins.
-.RE
-
-.sp
-.ne 2
-.na
-\fB\fBallocation_classes\fR\fR
+\fB\fBzpool_checkpoint\fR\fR
.ad
.RS 4n
.TS
l l .
-GUID org.zfsonlinux:allocation_classes
+GUID com.delphix:zpool_checkpoint
READ\-ONLY COMPATIBLE yes
DEPENDENCIES none
.TE
-This feature enables support for separate allocation classes.
+This feature enables the \fBzpool checkpoint\fR subcommand that can
+checkpoint the state of the pool at the time it was issued and later
+rewind back to it or discard it.
-This feature becomes \fBactive\fR when a dedicated allocation class vdev
-(dedup or special) is created with the \fBzpool create\fR or \fBzpool add\fR
-subcommands. With device removal, it can be returned to the \fBenabled\fR
-state if all the dedicated allocation class vdevs are removed.
+This feature becomes \fBactive\fR when the \fBzpool checkpoint\fR subcommand
+is used to checkpoint the pool.
+The feature will only return back to being \fBenabled\fR when the pool
+is rewound or the checkpoint has been discarded.
.RE
.SH "SEE ALSO"
projects / mirror_zfs.git / blobdiff