+++ /dev/null
-#!/bin/bash
-#
-# ZFS/ZPOOL configuration test script.
-
-basedir="$(dirname $0)"
-
-SCRIPT_COMMON=common.sh
-if [ -f "${basedir}/${SCRIPT_COMMON}" ]; then
-. "${basedir}/${SCRIPT_COMMON}"
-else
-echo "Missing helper script ${SCRIPT_COMMON}" && exit 1
-fi
-
-PROG=zconfig.sh
-
-usage() {
-cat << EOF
-USAGE:
-$0 [hvcts]
-
-DESCRIPTION:
- ZFS/ZPOOL configuration tests
-
-OPTIONS:
- -h Show this message
- -v Verbose
- -c Cleanup lo+file devices at start
- -t <#> Run listed tests
- -s <#> Skip listed tests
-
-EOF
-}
-
-while getopts 'hvct:s:?' OPTION; do
- case $OPTION in
- h)
- usage
- exit 1
- ;;
- v)
- VERBOSE=1
- ;;
- c)
- CLEANUP=1
- ;;
- t)
- TESTS_RUN=($OPTARG)
- ;;
- s)
- TESTS_SKIP=($OPTARG)
- ;;
- ?)
- usage
- exit
- ;;
- esac
-done
-
-if [ $(id -u) != 0 ]; then
- die "Must run as root"
-fi
-
-# Initialize the test suite
-init
-
-# Disable the udev rule 90-zfs.rules to prevent the zfs module
-# stack from being loaded due to the detection of a zfs device.
-# This is important because this test scripts require full control
-# over when and how the modules are loaded/unloaded. A trap is
-# set to ensure the udev rule is correctly replaced on exit.
-RULE=${udevruledir}/90-zfs.rules
-if test -e ${RULE}; then
- trap "mv ${RULE}.disabled ${RULE}" INT TERM EXIT
- mv ${RULE} ${RULE}.disabled
-fi
-
-# Perform pre-cleanup is requested
-if [ ${CLEANUP} ]; then
- ${ZFS_SH} -u
- cleanup_md_devices
- cleanup_loop_devices
- rm -f /tmp/zpool.cache.*
-fi
-
-# Check if we need to skip the tests that require scsi_debug and lsscsi.
-SCSI_DEBUG=0
-${INFOMOD} scsi_debug &>/dev/null && SCSI_DEBUG=1
-HAVE_LSSCSI=0
-test -f ${LSSCSI} && HAVE_LSSCSI=1
-if [ ${SCSI_DEBUG} -eq 0 ] || [ ${HAVE_LSSCSI} -eq 0 ]; then
- echo "Skipping test 10 which requires the scsi_debug " \
- "module and the ${LSSCSI} utility"
-fi
-
-# Validate persistent zpool.cache configuration.
-test_1() {
- local POOL_NAME=test1
- local TMP_FILE1=`mktemp`
- local TMP_FILE2=`mktemp`
- local TMP_CACHE=`mktemp -p /tmp zpool.cache.XXXXXXXX`
-
- # Create a pool save its status for comparison.
- ${ZFS_SH} zfs="spa_config_path=${TMP_CACHE}" || fail 1
- ${ZPOOL_CREATE_SH} -p ${POOL_NAME} -c lo-raidz2 || fail 2
- ${ZPOOL} status ${POOL_NAME} >${TMP_FILE1} || fail 3
-
- # Unload/load the module stack and verify the pool persists.
- ${ZFS_SH} -u || fail 4
- ${ZFS_SH} zfs="spa_config_path=${TMP_CACHE}" || fail 5
- ${ZPOOL} import -c ${TMP_CACHE} ${POOL_NAME} || fail 5
- ${ZPOOL} status ${POOL_NAME} >${TMP_FILE2} || fail 6
- cmp ${TMP_FILE1} ${TMP_FILE2} || fail 7
-
- # Cleanup the test pool and temporary files
- ${ZPOOL_CREATE_SH} -p ${POOL_NAME} -c lo-raidz2 -d || fail 8
- rm -f ${TMP_FILE1} ${TMP_FILE2} ${TMP_CACHE} || fail 9
- ${ZFS_SH} -u || fail 10
-
- pass
-}
-run_test 1 "persistent zpool.cache"
-
-# Validate ZFS disk scanning and import w/out zpool.cache configuration.
-test_2() {
- local POOL_NAME=test2
- local TMP_FILE1=`mktemp`
- local TMP_FILE2=`mktemp`
- local TMP_CACHE=`mktemp -p /tmp zpool.cache.XXXXXXXX`
-
- # Create a pool save its status for comparison.
- ${ZFS_SH} zfs="spa_config_path=${TMP_CACHE}" || fail 1
- ${ZPOOL_CREATE_SH} -p ${POOL_NAME} -c lo-raidz2 || fail 2
- ${ZPOOL} status ${POOL_NAME} >${TMP_FILE1} || fail 3
-
- # Unload the module stack, remove the cache file, load the module
- # stack and attempt to probe the disks to import the pool. As
- # a cross check verify the old pool state against the imported.
- ${ZFS_SH} -u || fail 4
- rm -f ${TMP_CACHE} || fail 5
- ${ZFS_SH} zfs="spa_config_path=${TMP_CACHE}" || fail 6
- ${ZPOOL} import -d /dev ${POOL_NAME} || fail 8
- ${ZPOOL} status ${POOL_NAME} >${TMP_FILE2} || fail 9
- cmp ${TMP_FILE1} ${TMP_FILE2} || fail 10
-
- # Cleanup the test pool and temporary files
- ${ZPOOL_CREATE_SH} -p ${POOL_NAME} -c lo-raidz2 -d || fail 11
- rm -f ${TMP_FILE1} ${TMP_FILE2} || fail 12
- ${ZFS_SH} -u || fail 13
-
- pass
-}
-run_test 2 "scan disks for pools to import"
-
-zconfig_zvol_device_stat() {
- local EXPECT=$1
- local POOL_NAME=/dev/zvol/$2
- local ZVOL_NAME=/dev/zvol/$3
- local SNAP_NAME=/dev/zvol/$4
- local CLONE_NAME=/dev/zvol/$5
- local COUNT=0
-
- # Briefly delay for udev
- udev_trigger
-
- # Pool exists
- stat ${POOL_NAME} &>/dev/null && let COUNT=$COUNT+1
-
- # Volume and partitions
- stat ${ZVOL_NAME} &>/dev/null && let COUNT=$COUNT+1
- stat ${ZVOL_NAME}-part1 &>/dev/null && let COUNT=$COUNT+1
- stat ${ZVOL_NAME}-part2 &>/dev/null && let COUNT=$COUNT+1
-
- # Snapshot with partitions
- stat ${SNAP_NAME} &>/dev/null && let COUNT=$COUNT+1
- stat ${SNAP_NAME}-part1 &>/dev/null && let COUNT=$COUNT+1
- stat ${SNAP_NAME}-part2 &>/dev/null && let COUNT=$COUNT+1
-
- # Clone with partitions
- stat ${CLONE_NAME} &>/dev/null && let COUNT=$COUNT+1
- stat ${CLONE_NAME}-part1 &>/dev/null && let COUNT=$COUNT+1
- stat ${CLONE_NAME}-part2 &>/dev/null && let COUNT=$COUNT+1
-
- if [ $EXPECT -ne $COUNT ]; then
- return 1
- fi
-
- return 0
-}
-
-# zpool import/export device check
-# (1 volume, 2 partitions, 1 snapshot, 1 clone)
-test_3() {
- local POOL_NAME=tank
- local ZVOL_NAME=volume
- local SNAP_NAME=snap
- local CLONE_NAME=clone
- local FULL_ZVOL_NAME=${POOL_NAME}/${ZVOL_NAME}
- local FULL_SNAP_NAME=${POOL_NAME}/${ZVOL_NAME}@${SNAP_NAME}
- local FULL_CLONE_NAME=${POOL_NAME}/${CLONE_NAME}
- local TMP_CACHE=`mktemp -p /tmp zpool.cache.XXXXXXXX`
-
- # Create a pool, volume, partition, snapshot, and clone.
- ${ZFS_SH} zfs="spa_config_path=${TMP_CACHE}" || fail 1
- ${ZPOOL_CREATE_SH} -p ${POOL_NAME} -c lo-raidz2 || fail 2
- ${ZFS} create -V 100M ${FULL_ZVOL_NAME} || fail 3
- ${ZFS} set snapdev=visible ${FULL_ZVOL_NAME} || fail 3
- label /dev/zvol/${FULL_ZVOL_NAME} msdos || fail 4
- partition /dev/zvol/${FULL_ZVOL_NAME} primary 1% 50% || fail 4
- partition /dev/zvol/${FULL_ZVOL_NAME} primary 51% -1 || fail 4
- ${ZFS} snapshot ${FULL_SNAP_NAME} || fail 5
- ${ZFS} clone ${FULL_SNAP_NAME} ${FULL_CLONE_NAME} || fail 6
-
- # Verify the devices were created
- zconfig_zvol_device_stat 10 ${POOL_NAME} ${FULL_ZVOL_NAME} \
- ${FULL_SNAP_NAME} ${FULL_CLONE_NAME} || fail 7
-
- # Export the pool
- ${ZPOOL} export ${POOL_NAME} || fail 8
-
- # verify the devices were removed
- zconfig_zvol_device_stat 0 ${POOL_NAME} ${FULL_ZVOL_NAME} \
- ${FULL_SNAP_NAME} ${FULL_CLONE_NAME} || fail 9
-
- # Import the pool, wait 1 second for udev
- ${ZPOOL} import ${POOL_NAME} || fail 10
-
- # Verify the devices were created
- zconfig_zvol_device_stat 10 ${POOL_NAME} ${FULL_ZVOL_NAME} \
- ${FULL_SNAP_NAME} ${FULL_CLONE_NAME} || fail 11
-
- # Toggle the snapdev and observe snapshot device links toggled
- ${ZFS} set snapdev=hidden ${FULL_ZVOL_NAME} || fail 12
-
- zconfig_zvol_device_stat 7 ${POOL_NAME} ${FULL_ZVOL_NAME} \
- "invalid" ${FULL_CLONE_NAME} || fail 13
-
- ${ZFS} set snapdev=visible ${FULL_ZVOL_NAME} || fail 14
-
- zconfig_zvol_device_stat 10 ${POOL_NAME} ${FULL_ZVOL_NAME} \
- ${FULL_SNAP_NAME} ${FULL_CLONE_NAME} || fail 15
-
- # Destroy the pool and consequently the devices
- ${ZPOOL_CREATE_SH} -p ${POOL_NAME} -c lo-raidz2 -d || fail 16
-
- # verify the devices were removed
- zconfig_zvol_device_stat 0 ${POOL_NAME} ${FULL_ZVOL_NAME} \
- ${FULL_SNAP_NAME} ${FULL_CLONE_NAME} || fail 17
-
- ${ZFS_SH} -u || fail 18
- rm -f ${TMP_CACHE} || fail 19
-
- pass
-}
-run_test 3 "zpool import/export device"
-
-# zpool insmod/rmmod device check (1 volume, 1 snapshot, 1 clone)
-test_4() {
- POOL_NAME=tank
- ZVOL_NAME=volume
- SNAP_NAME=snap
- CLONE_NAME=clone
- FULL_ZVOL_NAME=${POOL_NAME}/${ZVOL_NAME}
- FULL_SNAP_NAME=${POOL_NAME}/${ZVOL_NAME}@${SNAP_NAME}
- FULL_CLONE_NAME=${POOL_NAME}/${CLONE_NAME}
- TMP_CACHE=`mktemp -p /tmp zpool.cache.XXXXXXXX`
-
- # Create a pool, volume, snapshot, and clone
- ${ZFS_SH} zfs="spa_config_path=${TMP_CACHE}" || fail 1
- ${ZPOOL_CREATE_SH} -p ${POOL_NAME} -c lo-raidz2 || fail 2
- ${ZFS} create -V 100M ${FULL_ZVOL_NAME} || fail 3
- ${ZFS} set snapdev=visible ${FULL_ZVOL_NAME} || fail 3
- label /dev/zvol/${FULL_ZVOL_NAME} msdos || fail 4
- partition /dev/zvol/${FULL_ZVOL_NAME} primary 1% 50% || fail 4
- partition /dev/zvol/${FULL_ZVOL_NAME} primary 51% -1 || fail 4
- ${ZFS} snapshot ${FULL_SNAP_NAME} || fail 5
- ${ZFS} clone ${FULL_SNAP_NAME} ${FULL_CLONE_NAME} || fail 6
-
- # Verify the devices were created
- zconfig_zvol_device_stat 10 ${POOL_NAME} ${FULL_ZVOL_NAME} \
- ${FULL_SNAP_NAME} ${FULL_CLONE_NAME} || fail 7
-
- # Unload the modules
- ${ZFS_SH} -u || fail 8
-
- # Verify the devices were removed
- zconfig_zvol_device_stat 0 ${POOL_NAME} ${FULL_ZVOL_NAME} \
- ${FULL_SNAP_NAME} ${FULL_CLONE_NAME} || fail 9
-
- # Load the modules, list the pools to ensure they are opened
- ${ZFS_SH} zfs="spa_config_path=${TMP_CACHE}" || fail 10
- ${ZPOOL} import -c ${TMP_CACHE} ${POOL_NAME} || fail 10
- ${ZPOOL} list &>/dev/null
-
- # Verify the devices were created
- zconfig_zvol_device_stat 10 ${POOL_NAME} ${FULL_ZVOL_NAME} \
- ${FULL_SNAP_NAME} ${FULL_CLONE_NAME} || fail 11
-
- # Destroy the pool and consequently the devices
- ${ZPOOL_CREATE_SH} -p ${POOL_NAME} -c lo-raidz2 -d || fail 12
-
- # Verify the devices were removed
- zconfig_zvol_device_stat 0 ${POOL_NAME} ${FULL_ZVOL_NAME} \
- ${FULL_SNAP_NAME} ${FULL_CLONE_NAME} || fail 13
-
- ${ZFS_SH} -u || fail 14
- rm -f ${TMP_CACHE} || fail 15
-
- pass
-}
-run_test 4 "zpool insmod/rmmod device"
-
-# ZVOL volume sanity check
-test_5() {
- local POOL_NAME=tank
- local ZVOL_NAME=fish
- local FULL_NAME=${POOL_NAME}/${ZVOL_NAME}
- local TMP_CACHE=`mktemp -p /tmp zpool.cache.XXXXXXXX`
-
- # Create a pool and volume.
- ${ZFS_SH} zfs="spa_config_path=${TMP_CACHE}" || fail 1
- ${ZPOOL_CREATE_SH} -p ${POOL_NAME} -c lo-raid0 || fail 2
- ${ZFS} create -V 800M ${FULL_NAME} || fail 3
- label /dev/zvol/${FULL_NAME} msdos || fail 4
- partition /dev/zvol/${FULL_NAME} primary 1 -1 || fail 4
- format /dev/zvol/${FULL_NAME}-part1 ext2 || fail 5
-
- # Mount the ext2 filesystem and copy some data to it.
- mkdir -p /tmp/${ZVOL_NAME}-part1 || fail 6
- mount /dev/zvol/${FULL_NAME}-part1 /tmp/${ZVOL_NAME}-part1 || fail 7
- cp -RL ${SRC_DIR} /tmp/${ZVOL_NAME}-part1 || fail 8
- sync
-
- # Verify the copied files match the original files.
- diff -ur ${SRC_DIR} /tmp/${ZVOL_NAME}-part1/${SRC_DIR##*/} \
- &>/dev/null || fail 9
-
- # Remove the files, umount, destroy the volume and pool.
- rm -Rf /tmp/${ZVOL_NAME}-part1/${SRC_DIR##*/} || fail 10
- umount /tmp/${ZVOL_NAME}-part1 || fail 11
- rmdir /tmp/${ZVOL_NAME}-part1 || fail 12
-
- ${ZFS} destroy ${FULL_NAME} || fail 13
- ${ZPOOL_CREATE_SH} -p ${POOL_NAME} -c lo-raidz2 -d || fail 14
- ${ZFS_SH} -u || fail 15
- rm -f ${TMP_CACHE} || fail 16
-
- pass
-}
-run_test 5 "zvol+ext2 volume"
-
-# ZVOL snapshot sanity check
-test_6() {
- local POOL_NAME=tank
- local ZVOL_NAME=fish
- local SNAP_NAME=pristine
- local FULL_ZVOL_NAME=${POOL_NAME}/${ZVOL_NAME}
- local FULL_SNAP_NAME=${POOL_NAME}/${ZVOL_NAME}@${SNAP_NAME}
- local TMP_CACHE=`mktemp -p /tmp zpool.cache.XXXXXXXX`
-
- # Create a pool and volume.
- ${ZFS_SH} zfs="spa_config_path=${TMP_CACHE}" || fail 1
- ${ZPOOL_CREATE_SH} -p ${POOL_NAME} -c lo-raid0 || fail 2
- ${ZFS} create -s -V 800M ${FULL_ZVOL_NAME} || fail 3
- ${ZFS} set snapdev=visible ${FULL_ZVOL_NAME} || fail 3
- label /dev/zvol/${FULL_ZVOL_NAME} msdos || fail 4
- partition /dev/zvol/${FULL_ZVOL_NAME} primary 1 -1 || fail 4
- format /dev/zvol/${FULL_ZVOL_NAME}-part1 ext2 || fail 5
-
- # Mount the ext2 filesystem and copy some data to it.
- mkdir -p /tmp/${ZVOL_NAME}-part1 || fail 6
- mount /dev/zvol/${FULL_ZVOL_NAME}-part1 /tmp/${ZVOL_NAME}-part1 \
- || fail 7
-
- # Snapshot the pristine ext2 filesystem and mount it read-only.
- ${ZFS} snapshot ${FULL_SNAP_NAME} || fail 8
- wait_udev /dev/zvol/${FULL_SNAP_NAME}-part1 30 || fail 8
- mkdir -p /tmp/${SNAP_NAME}-part1 || fail 9
- mount /dev/zvol/${FULL_SNAP_NAME}-part1 /tmp/${SNAP_NAME}-part1 \
- &>/dev/null || fail 10
-
- # Copy to original volume
- cp -RL ${SRC_DIR} /tmp/${ZVOL_NAME}-part1 || fail 11
- sync
-
- # Verify the copied files match the original files,
- # and the copied files do NOT appear in the snapshot.
- diff -ur ${SRC_DIR} /tmp/${ZVOL_NAME}-part1/${SRC_DIR##*/} \
- &>/dev/null || fail 12
- diff -ur ${SRC_DIR} /tmp/${SNAP_NAME}-part1/${SRC_DIR##*/} \
- &>/dev/null && fail 13
-
- # umount, destroy the snapshot, volume, and pool.
- umount /tmp/${SNAP_NAME}-part1 || fail 14
- rmdir /tmp/${SNAP_NAME}-part1 || fail 15
- ${ZFS} destroy ${FULL_SNAP_NAME} || fail 16
-
- umount /tmp/${ZVOL_NAME}-part1 || fail 17
- rmdir /tmp/${ZVOL_NAME}-part1 || fail 18
- ${ZFS} destroy ${FULL_ZVOL_NAME} || fail 19
-
- ${ZPOOL_CREATE_SH} -p ${POOL_NAME} -c lo-raidz2 -d || fail 20
- ${ZFS_SH} -u || fail 21
- rm -f ${TMP_CACHE} || fail 22
-
- pass
-}
-run_test 6 "zvol+ext2 snapshot"
-
-# ZVOL clone sanity check
-test_7() {
- local POOL_NAME=tank
- local ZVOL_NAME=fish
- local SNAP_NAME=pristine
- local CLONE_NAME=clone
- local FULL_ZVOL_NAME=${POOL_NAME}/${ZVOL_NAME}
- local FULL_SNAP_NAME=${POOL_NAME}/${ZVOL_NAME}@${SNAP_NAME}
- local FULL_CLONE_NAME=${POOL_NAME}/${CLONE_NAME}
- local TMP_CACHE=`mktemp -p /tmp zpool.cache.XXXXXXXX`
-
- # Create a pool and volume.
- ${ZFS_SH} zfs="spa_config_path=${TMP_CACHE}" || fail 1
- ${ZPOOL_CREATE_SH} -p ${POOL_NAME} -c lo-raidz2 || fail 2
- ${ZFS} create -V 300M ${FULL_ZVOL_NAME} || fail 3
- ${ZFS} set snapdev=visible ${FULL_ZVOL_NAME} || fail 3
- label /dev/zvol/${FULL_ZVOL_NAME} msdos || fail 4
- partition /dev/zvol/${FULL_ZVOL_NAME} primary 1 -1 || fail 4
- format /dev/zvol/${FULL_ZVOL_NAME}-part1 ext2 || fail 5
-
- # Snapshot the pristine ext2 filesystem.
- ${ZFS} snapshot ${FULL_SNAP_NAME} || fail 6
- wait_udev /dev/zvol/${FULL_SNAP_NAME}-part1 30 || fail 7
-
- # Mount the ext2 filesystem so some data can be copied to it.
- mkdir -p /tmp/${ZVOL_NAME}-part1 || fail 7
- mount /dev/zvol/${FULL_ZVOL_NAME}-part1 \
- /tmp/${ZVOL_NAME}-part1 || fail 8
-
- # Mount the pristine ext2 snapshot.
- mkdir -p /tmp/${SNAP_NAME}-part1 || fail 9
- mount /dev/zvol/${FULL_SNAP_NAME}-part1 \
- /tmp/${SNAP_NAME}-part1 &>/dev/null || fail 10
-
- # Copy to original volume.
- cp -RL ${SRC_DIR} /tmp/${ZVOL_NAME}-part1 || fail 11
- sync
-
- # Verify the copied files match the original files,
- # and the copied files do NOT appear in the snapshot.
- diff -ur ${SRC_DIR} /tmp/${ZVOL_NAME}-part1/${SRC_DIR##*/} \
- &>/dev/null || fail 12
- diff -ur ${SRC_DIR} /tmp/${SNAP_NAME}-part1/${SRC_DIR##*/} \
- &>/dev/null && fail 13
-
- # Clone from the original pristine snapshot
- ${ZFS} clone ${FULL_SNAP_NAME} ${FULL_CLONE_NAME} || fail 14
- wait_udev /dev/zvol/${FULL_CLONE_NAME}-part1 30 || fail 14
- mkdir -p /tmp/${CLONE_NAME}-part1 || fail 15
- mount /dev/zvol/${FULL_CLONE_NAME}-part1 \
- /tmp/${CLONE_NAME}-part1 || fail 16
-
- # Verify the clone matches the pristine snapshot,
- # and the files copied to the original volume are NOT there.
- diff -ur /tmp/${SNAP_NAME}-part1 /tmp/${CLONE_NAME}-part1 \
- &>/dev/null || fail 17
- diff -ur /tmp/${ZVOL_NAME}-part1 /tmp/${CLONE_NAME}-part1 \
- &>/dev/null && fail 18
-
- # Copy to cloned volume.
- cp -RL ${SRC_DIR} /tmp/${CLONE_NAME}-part1 || fail 19
- sync
-
- # Verify the clone matches the modified original volume.
- diff -ur /tmp/${ZVOL_NAME}-part1 /tmp/${CLONE_NAME}-part1 \
- &>/dev/null || fail 20
-
- # umount, destroy the snapshot, volume, and pool.
- umount /tmp/${CLONE_NAME}-part1 || fail 21
- rmdir /tmp/${CLONE_NAME}-part1 || fail 22
- ${ZFS} destroy ${FULL_CLONE_NAME} || fail 23
-
- umount /tmp/${SNAP_NAME}-part1 || fail 24
- rmdir /tmp/${SNAP_NAME}-part1 || fail 25
- ${ZFS} destroy ${FULL_SNAP_NAME} || fail 26
-
- umount /tmp/${ZVOL_NAME}-part1 || fail 27
- rmdir /tmp/${ZVOL_NAME}-part1 || fail 28
- ${ZFS} destroy ${FULL_ZVOL_NAME} || fail 29
-
- ${ZPOOL_CREATE_SH} -p ${POOL_NAME} -c lo-raidz2 -d || fail 30
- ${ZFS_SH} -u || fail 31
- rm -f ${TMP_CACHE} || fail 32
-
- pass
-}
-run_test 7 "zvol+ext2 clone"
-
-# Send/Receive sanity check
-test_8() {
- local POOL_NAME1=tank1
- local POOL_NAME2=tank2
- local ZVOL_NAME=fish
- local SNAP_NAME=snap
- local FULL_ZVOL_NAME1=${POOL_NAME1}/${ZVOL_NAME}
- local FULL_ZVOL_NAME2=${POOL_NAME2}/${ZVOL_NAME}
- local FULL_SNAP_NAME1=${POOL_NAME1}/${ZVOL_NAME}@${SNAP_NAME}
- local FULL_SNAP_NAME2=${POOL_NAME2}/${ZVOL_NAME}@${SNAP_NAME}
- local TMP_CACHE=`mktemp -p /tmp zpool.cache.XXXXXXXX`
-
- # Create two pools and a volume
- ${ZFS_SH} zfs="spa_config_path=${TMP_CACHE}" || fail 1
- ${ZPOOL_CREATE_SH} -p ${POOL_NAME1} -c lo-raidz2 || fail 2
- ${ZPOOL_CREATE_SH} -p ${POOL_NAME2} -c lo-raidz2 || fail 2
- ${ZFS} create -V 300M ${FULL_ZVOL_NAME1} || fail 3
- ${ZFS} set snapdev=visible ${FULL_ZVOL_NAME1} || fail 3
- label /dev/zvol/${FULL_ZVOL_NAME1} msdos || fail 4
- partition /dev/zvol/${FULL_ZVOL_NAME1} primary 1 -1 || fail 4
- format /dev/zvol/${FULL_ZVOL_NAME1}-part1 ext2 || fail 5
-
- # Mount the ext2 filesystem and copy some data to it.
- mkdir -p /tmp/${FULL_ZVOL_NAME1}-part1 || fail 6
- mount /dev/zvol/${FULL_ZVOL_NAME1}-part1 \
- /tmp/${FULL_ZVOL_NAME1}-part1 || fail 7
- cp -RL ${SRC_DIR} /tmp/${FULL_ZVOL_NAME1}-part1 || fail 8
-
- # Unmount, snapshot, mount the ext2 filesystem so it may be sent.
- # We only unmount to ensure the ext2 filesystem is clean.
- umount /tmp/${FULL_ZVOL_NAME1}-part1 || fail 9
- ${ZFS} snapshot ${FULL_SNAP_NAME1} || fail 10
- wait_udev /dev/zvol/${FULL_SNAP_NAME1} 30 || fail 10
- mount /dev/zvol/${FULL_ZVOL_NAME1}-part1 \
- /tmp/${FULL_ZVOL_NAME1}-part1 || 11
-
- # Send/receive the snapshot from POOL_NAME1 to POOL_NAME2
- (${ZFS} send ${FULL_SNAP_NAME1} | \
- ${ZFS} receive ${FULL_ZVOL_NAME2}) || fail 12
- wait_udev /dev/zvol/${FULL_ZVOL_NAME2}-part1 30 || fail 12
-
- # Mount the sent ext2 filesystem.
- mkdir -p /tmp/${FULL_ZVOL_NAME2}-part1 || fail 13
- mount /dev/zvol/${FULL_ZVOL_NAME2}-part1 \
- /tmp/${FULL_ZVOL_NAME2}-part1 || fail 14
-
- # Verify the contents of the volumes match
- diff -ur /tmp/${FULL_ZVOL_NAME1}-part1 /tmp/${FULL_ZVOL_NAME2}-part1 \
- &>/dev/null || fail 15
-
- # Umount, destroy the volume and pool.
- umount /tmp/${FULL_ZVOL_NAME1}-part1 || fail 16
- umount /tmp/${FULL_ZVOL_NAME2}-part1 || fail 17
- rmdir /tmp/${FULL_ZVOL_NAME1}-part1 || fail 18
- rmdir /tmp/${FULL_ZVOL_NAME2}-part1 || fail 19
- rmdir /tmp/${POOL_NAME1} || fail 20
- rmdir /tmp/${POOL_NAME2} || fail 21
-
- ${ZFS} destroy ${FULL_SNAP_NAME1} || fail 22
- ${ZFS} destroy ${FULL_SNAP_NAME2} || fail 23
- ${ZFS} destroy ${FULL_ZVOL_NAME1} || fail 24
- ${ZFS} destroy ${FULL_ZVOL_NAME2} || fail 25
- ${ZPOOL_CREATE_SH} -p ${POOL_NAME1} -c lo-raidz2 -d || fail 26
- ${ZPOOL_CREATE_SH} -p ${POOL_NAME2} -c lo-raidz2 -d || fail 27
- ${ZFS_SH} -u || fail 28
- rm -f ${TMP_CACHE} || fail 29
-
- pass
-}
-run_test 8 "zfs send/receive"
-
-# zpool event sanity check
-test_9() {
- local POOL_NAME=tank
- local ZVOL_NAME=fish
- local FULL_NAME=${POOL_NAME}/${ZVOL_NAME}
- local TMP_CACHE=`mktemp -p /tmp zpool.cache.XXXXXXXX`
- local TMP_EVENTS=`mktemp -p /tmp zpool.events.XXXXXXXX`
-
- # Create a pool and volume.
- ${ZFS_SH} zfs="spa_config_path=${TMP_CACHE}" || fail 1
- ${ZPOOL_CREATE_SH} -p ${POOL_NAME} -c lo-raidz2 || fail 2
- ${ZFS} create -V 300M ${FULL_NAME} || fail 3
- udev_trigger
-
- # Dump the events, there should be a pool create event
- ${ZPOOL} events >${TMP_EVENTS} || fail 4
- MATCHES=`grep -c sysevent\.fs\.zfs\.pool_create ${TMP_EVENTS}`
- [ $MATCHES -eq 1 ] || fail 5
-
- # Clear the events and ensure there are none.
- ${ZPOOL} events -c >/dev/null || fail 6
- ${ZPOOL} events >${TMP_EVENTS} || fail 7
- EVENTS=`wc -l ${TMP_EVENTS} | cut -f1 -d' '`
- [ $EVENTS -gt 1 ] && fail 8
-
- ${ZFS} destroy ${FULL_NAME} || fail 9
- ${ZPOOL_CREATE_SH} -p ${POOL_NAME} -c lo-raidz2 -d || fail 10
- ${ZFS_SH} -u || fail 11
- rm -f ${TMP_CACHE} || fail 12
- rm -f ${TMP_EVENTS} || fail 13
-
- pass
-}
-run_test 9 "zpool events"
-
-zconfig_add_vdev() {
- local POOL_NAME=$1
- local TYPE=$2
- local DEVICE=$3
- local TMP_FILE1=`mktemp`
- local TMP_FILE2=`mktemp`
- local TMP_FILE3=`mktemp`
-
- BASE_DEVICE=`basename ${DEVICE}`
-
- ${ZPOOL} status ${POOL_NAME} >${TMP_FILE1}
- ${ZPOOL} add -f ${POOL_NAME} ${TYPE} ${DEVICE} 2>/dev/null || return 1
- ${ZPOOL} status ${POOL_NAME} >${TMP_FILE2}
- diff ${TMP_FILE1} ${TMP_FILE2} > ${TMP_FILE3}
-
- [ `wc -l ${TMP_FILE3}|${AWK} '{print $1}'` -eq 3 ] || return 1
-
- PARENT_VDEV=`tail -2 ${TMP_FILE3} | head -1 | ${AWK} '{print $NF}'`
- case $TYPE in
- cache)
- [ "${PARENT_VDEV}" = "${TYPE}" ] || return 1
- ;;
- log)
- [ "${PARENT_VDEV}" = "logs" ] || return 1
- ;;
- esac
-
- if ! tail -1 ${TMP_FILE3} |
- egrep -q "^>[[:space:]]+${BASE_DEVICE}[[:space:]]+ONLINE" ; then
- return 1
- fi
- rm -f ${TMP_FILE1} ${TMP_FILE2} ${TMP_FILE3}
-
- return 0
-}
-
-# zpool add and remove sanity check
-test_10() {
- local POOL_NAME=tank
- local TMP_CACHE=`mktemp -p /tmp zpool.cache.XXXXXXXX`
- local TMP_FILE1=`mktemp`
- local TMP_FILE2=`mktemp`
-
- if [ ${SCSI_DEBUG} -eq 0 ] || [ ${HAVE_LSSCSI} -eq 0 ] ; then
- skip
- return
- fi
-
- test `${LSMOD} | grep -c scsi_debug` -gt 0 && \
- (${RMMOD} scsi_debug || exit 1)
-
- /sbin/modprobe scsi_debug dev_size_mb=128 ||
- die "Error $? creating scsi_debug device"
- udev_trigger
-
- SDDEVICE=`${LSSCSI}|${AWK} '/scsi_debug/ { print $6; exit }'`
- BASE_SDDEVICE=`basename $SDDEVICE`
-
- # Create a pool
- ${ZFS_SH} zfs="spa_config_path=${TMP_CACHE}" || fail 1
- ${ZPOOL_CREATE_SH} -p ${POOL_NAME} -c lo-raidz2 || fail 2
- ${ZPOOL} status ${POOL_NAME} >${TMP_FILE1} || fail 3
-
- # Add and remove a cache vdev by full path
- zconfig_add_vdev ${POOL_NAME} cache ${SDDEVICE} || fail 4
- ${ZPOOL} remove ${POOL_NAME} ${SDDEVICE} || fail 5
- ${ZPOOL} status ${POOL_NAME} >${TMP_FILE2} || fail 6
- cmp ${TMP_FILE1} ${TMP_FILE2} || fail 7
- sleep 1
-
- # Add and remove a cache vdev by shorthand path
- zconfig_add_vdev ${POOL_NAME} cache ${BASE_SDDEVICE} || fail 8
- ${ZPOOL} remove ${POOL_NAME} ${BASE_SDDEVICE} || fail 9
- ${ZPOOL} status ${POOL_NAME} >${TMP_FILE2} || fail 10
- cmp ${TMP_FILE1} ${TMP_FILE2} || fail 11
- sleep 1
-
- # Add and remove a log vdev
- zconfig_add_vdev ${POOL_NAME} log ${BASE_SDDEVICE} || fail 12
- ${ZPOOL} remove ${POOL_NAME} ${BASE_SDDEVICE} || fail 13
- ${ZPOOL} status ${POOL_NAME} >${TMP_FILE2} || fail 14
- cmp ${TMP_FILE1} ${TMP_FILE2} || fail 15
-
- ${ZPOOL_CREATE_SH} -p ${POOL_NAME} -c lo-raidz2 -d || fail 16
- ${ZFS_SH} -u || fail 17
- ${RMMOD} scsi_debug || fail 18
-
- rm -f ${TMP_FILE1} ${TMP_FILE2} ${TMP_CACHE} || fail 19
-
- pass
-}
-run_test 10 "zpool add/remove vdev"
-
-exit 0
projects / mirror_zfs.git / commitdiff