#TEST_ZTEST_DIR="/var/tmp/"
#TEST_ZTEST_OPTIONS="-V"
-### ziltest
-#TEST_ZILTEST_SKIP="yes"
-#TEST_ZILTEST_OPTIONS=""
-
### zconfig
#TEST_ZCONFIG_SKIP="yes"
TEST_ZCONFIG_OPTIONS="-c -s10"
CentOS-7*)
# ZFS enabled xfstests fails to build
TEST_XFSTESTS_SKIP="yes"
- # Sporadic VERIFY(!zilog_is_dirty(zilog)) failed
- TEST_ZILTEST_SKIP="yes"
;;
CentOS-6*)
- # Sporadic VERIFY(!zilog_is_dirty(zilog)) failed
- TEST_ZILTEST_SKIP="yes"
;;
Debian*)
;;
dist_pkgdata_SCRIPTS = \
$(top_builddir)/scripts/common.sh \
$(top_srcdir)/scripts/zconfig.sh \
- $(top_srcdir)/scripts/ziltest.sh \
$(top_srcdir)/scripts/zimport.sh \
$(top_srcdir)/scripts/zfs.sh \
$(top_srcdir)/scripts/zfs-tests.sh \
+++ /dev/null
-#!/bin/bash
-#
-# CDDL HEADER START
-#
-# The contents of this file are subject to the terms of the
-# Common Development and Distribution License, Version 1.0 only
-# (the "License"). You may not use this file except in compliance
-# with the License.
-#
-# You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
-# or http://www.opensolaris.org/os/licensing.
-# See the License for the specific language governing permissions
-# and limitations under the License.
-#
-# When distributing Covered Code, include this CDDL HEADER in each
-# file and include the License file at usr/src/OPENSOLARIS.LICENSE.
-# If applicable, add the following below this CDDL HEADER, with the
-# fields enclosed by brackets "[]" replaced with your own identifying
-# information: Portions Copyright [yyyy] [name of copyright owner]
-#
-# CDDL HEADER END
-#
-#
-# Copyright 2007 Sun Microsystems, Inc. All rights reserved.
-# Use is subject to license terms.
-#
-# Linux version
-#
-# To run just type ziltest.sh
-#
-# - creates a 200MB pool in /var/tmp/
-# - prints information on:
-# working set files
-# ZIL records written
-# ZIL block usage
-# verification results
-# - returns status of 0 on success
-#
-##########################################################################
-#
-# Here's how it all works:
-#
-# The general idea is to build up
-# an intent log from a bunch of diverse user commands
-# without actually committing them to the file system.
-# Then copy the file system, replay the intent
-# log and compare the file system and the copy.
-#
-# To enable this automated testing of the intent log
-# requires some but minimal support from the file system.
-# In particular, a "freeze" command is required to flush
-# the in-flight transactions; to stop the actual
-# committing of transactions; and to ensure no deltas are
-# discarded. All deltas past a freeze point are kept for
-# replay and comparison later. Here is the flow:
-#
-# create an empty file system (FS)
-# freeze FS
-# run various user commands that create files, directories and ACLs
-# copy FS to temporary location (COPY)
-# unmount filesystem
-# <at this stage FS is empty again and unfrozen, and the
-# intent log contains a complete set of deltas to replay it>
-# remount FS <which replays the intent log>
-# compare FS against the COPY
-#
-
-PATH=/usr/bin
-PATH=$PATH:/usr/sbin
-PATH=$PATH:/bin
-PATH=$PATH:/sbin
-export PATH
-
-# ====================================================================
-# SETUP
-# ====================================================================
-CMD=$(basename "$0")
-POOL=ziltestpool.$$
-DEVSIZE=${DEVSIZE-200m}
-POOLDIR=/var/tmp
-POOLFILE=$POOLDIR/ziltest_poolfile.$$
-SLOGFILE=$POOLDIR/ziltest_slog.$$
-FS=$POOL/fs
-ROOT=/$FS
-COPY=/var/tmp/${POOL}
-KEEP=no
-
-cleanup()
-{
- zfs destroy -rf $FS
- echo "$CMD: pool I/O summary & status:"
- echo "----------------------------------------------------"
- zpool iostat $POOL
- echo
- zpool status $POOL
- echo "----------------------------------------------------"
- echo
- zpool destroy -f $POOL
- rm -rf $COPY
- rm $POOLFILE $SLOGFILE
-}
-
-bail()
-{
- test $KEEP = no && cleanup
- echo "$1"
- exit 1
-}
-
-test $# -eq 0 || bail "usage: $CMD"
-
-# ====================================================================
-# PREP
-#
-# Create a pool using a file based vdev
-# Create a destination for runtime copy of FS
-# Freeze transaction syncing in the pool
-# ====================================================================
-truncate -s "$DEVSIZE" $POOLFILE || bail "can't make $POOLFILE"
-truncate -s "$DEVSIZE" $SLOGFILE || bail "can't make $SLOGFILE"
-zpool create $POOL $POOLFILE log $SLOGFILE || bail "can't create pool
-$POOL"
-zpool list $POOL
-
-zfs set compression=on $POOL || bail "can't enable compression on $POOL"
-zfs create $FS || bail "can't create $FS"
-mkdir -p $COPY || bail "can't create $COPY"
-
-#
-# This dd command works around an issue where ZIL records aren't created
-# after freezing the pool unless a ZIL header already exists. Create a file
-# synchronously to force ZFS to write one out.
-#
-dd if=/dev/zero of=$ROOT/sync conv=fdatasync,fsync bs=1 count=1 2> /dev/null
-
-zpool freeze $POOL || bail "can't freeze $POOL"
-
-# ====================================================================
-# TESTS
-#
-# Add operations here that will add commit records to the ZIL
-#
-# Use $ROOT for all file name prefixes
-# ====================================================================
-
-#
-# TX_CREATE
-#
-touch $ROOT/a
-
-#
-# TX_RENAME
-#
-mv $ROOT/a $ROOT/b
-
-#
-# TX_SYMLINK
-#
-touch $ROOT/c
-ln -s $ROOT/c $ROOT/d
-
-#
-# TX_LINK
-#
-touch $ROOT/e
-ln $ROOT/e $ROOT/f
-
-#
-# TX_MKDIR
-#
-mkdir $ROOT/dir_to_delete
-
-#
-# TX_RMDIR
-#
-rmdir $ROOT/dir_to_delete
-
-#
-# Create a simple validation payload
-#
-PAYLOAD=$(modinfo -F filename zfs)
-cp "$PAYLOAD" "$ROOT/payload"
-CHECKSUM_BEFORE=$(sha256sum -b "$PAYLOAD")
-
-#
-# TX_WRITE (small file with ordering)
-#
-if is_linux; then
- cp /proc/self/mounts $ROOT/small_file
-else
- cp /etc/mtab $ROOT/small_file
-fi
-cp /etc/profile $ROOT/small_file
-
-#
-# TX_CREATE, TX_MKDIR, TX_REMOVE, TX_RMDIR
-#
-cp -R /usr/share/dict $ROOT
-rm -rf $ROOT/dict
-
-#
-# TX_SETATTR
-#
-touch $ROOT/setattr
-chmod 567 $ROOT/setattr
-chgrp root $ROOT/setattr
-touch -cm -t 201311271200 $ROOT/setattr
-
-#
-# TX_TRUNCATE (to zero)
-#
-cp /etc/services $ROOT/truncated_file
-> $ROOT/truncated_file
-
-#
-# Write to an open but removed file
-#
-(sleep 2; date) > $ROOT/date & sleep 1; rm $ROOT/date; wait
-
-#
-# TX_WRITE (large file)
-#
-dd if=/usr/share/lib/termcap of=$ROOT/large bs=128k oflag=sync 2> /dev/null
-
-#
-# Write zeroes, which compresss to holes, in the middle of a file
-#
-dd if=$POOLFILE of=$ROOT/holes.1 bs=128k count=8 2> /dev/null
-dd if=/dev/zero of=$ROOT/holes.1 bs=128k count=2 2> /dev/null
-
-dd if=$POOLFILE of=$ROOT/holes.2 bs=128k count=8 2> /dev/null
-dd if=/dev/zero of=$ROOT/holes.2 bs=128k count=2 oseek=2 2> /dev/null
-
-dd if=$POOLFILE of=$ROOT/holes.3 bs=128k count=8 2> /dev/null
-dd if=/dev/zero of=$ROOT/holes.3 bs=128k count=2 oseek=2 conv=notrunc 2> /dev/null
-
-#
-# TX_MKXATTR
-#
-mkdir $ROOT/xattr.dir
-attr -qs fileattr -V HelloWorld $ROOT/xattr.dir
-attr -qs tmpattr -V HelloWorld $ROOT/xattr.dir
-attr -qr tmpattr $ROOT/xattr.dir
-
-touch $ROOT/xattr.file
-attr -qs fileattr -V HelloWorld $ROOT/xattr.file
-attr -qs tmpattr -V HelloWorld $ROOT/xattr.file
-attr -qr tmpattr $ROOT/xattr.file
-rm $ROOT/xattr.file
-
-
-# ====================================================================
-# REPLAY
-# ====================================================================
-
-KEEP=yes # keep stuff around if we fail, so we can look at it
-
-cd $ROOT
-find . | cpio -pdmu --quiet $COPY
-echo
-cd /
-
-zfs unmount $FS || bail "can't unmount $FS"
-
-echo "$CMD: transactions to replay:"
-echo "----------------------------------------------------"
-zdb -ivv $FS || bail "can't run zdb on $POOL"
-echo "----------------------------------------------------"
-echo
-
-#
-# Export and reimport the pool to unfreeze it and claim log blocks.
-# It has to be import -f because we can't write a frozen pool's labels!
-#
-zpool export $POOL || bail "can't export $POOL"
-zpool import -f -d $POOLDIR $POOL || bail "can't import $POOL"
-
-# ====================================================================
-# VERIFY
-# ====================================================================
-
-echo "$CMD: current block usage:"
-echo "----------------------------------------------------"
-zdb -bcv $POOL || bail "blocks were leaked!"
-echo "----------------------------------------------------"
-echo
-
-echo "$CMD: Copy of xattrs:"
-echo "----------------------------------------------------"
-attr -l $ROOT/xattr.dir || bail "can't list xattrs"
-echo "----------------------------------------------------"
-echo
-
-echo "$CMD: Results of workingset diff:"
-echo "----------------------------------------------------"
-diff -r $ROOT $COPY > /dev/null || diff -r $ROOT $COPY || bail "replay diffs!"
-
-echo "$CHECKSUM_BEFORE" | sha256sum -c || bail "payload checksums don't match"
-echo "payload checksum matched"
-echo "----------------------------------------------------"
-echo
-
-cleanup
-
-exit 0
[tests/functional/slog]
tests = ['slog_001_pos', 'slog_002_pos', 'slog_003_pos', 'slog_004_pos',
'slog_005_pos', 'slog_006_pos', 'slog_007_pos', 'slog_008_neg',
- 'slog_009_neg', 'slog_010_neg', 'slog_011_neg']
+ 'slog_009_neg', 'slog_010_neg', 'slog_011_neg', 'slog_015_pos']
# DISABLED:
# clone_001_pos - https://github.com/zfsonlinux/zfs/issues/3484
slog_011_neg.ksh \
slog_012_neg.ksh \
slog_013_pos.ksh \
- slog_014_pos.ksh
+ slog_014_pos.ksh \
+ slog_015_pos.ksh
export SIZE=64M
-export VDIR=/disk-slog
-export VDIR2=/disk2-slog
+export VDIR=$TEST_BASE_DIR/disk-slog
+export VDIR2=$TEST_BASE_DIR/disk2-slog
export VDEV="$VDIR/a $VDIR/b $VDIR/c"
export SDEV="$VDIR/d"
if datasetexists $TESTPOOL2 ; then
log_must $ZPOOL destroy -f $TESTPOOL2
fi
+ rm -rf $TESTDIR
}
#
--- /dev/null
+#!/bin/ksh -p
+#
+# CDDL HEADER START
+#
+# The contents of this file are subject to the terms of the
+# Common Development and Distribution License (the "License").
+# You may not use this file except in compliance with the License.
+#
+# You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
+# or http://www.opensolaris.org/os/licensing.
+# See the License for the specific language governing permissions
+# and limitations under the License.
+#
+# When distributing Covered Code, include this CDDL HEADER in each
+# file and include the License file at usr/src/OPENSOLARIS.LICENSE.
+# If applicable, add the following below this CDDL HEADER, with the
+# fields enclosed by brackets "[]" replaced with your own identifying
+# information: Portions Copyright [yyyy] [name of copyright owner]
+#
+# CDDL HEADER END
+#
+
+#
+# Copyright 2007 Sun Microsystems, Inc. All rights reserved.
+# Use is subject to license terms.
+#
+
+. $STF_SUITE/tests/functional/slog/slog.kshlib
+
+#
+# DESCRIPTION:
+# Verify slogs are replayed correctly. This test is a direct
+# adaptation of the ziltest.sh script for the ZFS Test Suite.
+#
+# The general idea is to build up an intent log from a bunch of
+# diverse user commands without actually committing them to the
+# file system. Then copy the file system, replay the intent
+# log and compare the file system and the copy.
+#
+# To enable this automated testing of the intent log some minimal
+# support is required of the file system. In particular, a
+# "freeze" command is required to flush the in-flight transactions;
+# to stop the actual committing of transactions; and to ensure no
+# deltas are discarded. All deltas past a freeze point are kept
+# for replay and comparison later. Here is the flow:
+#
+# STRATEGY:
+# 1. Create an empty file system (TESTFS)
+# 2. Freeze TESTFS
+# 3. Run various user commands that create files, directories and ACLs
+# 4. Copy TESTFS to temporary location (TESTDIR)
+# 5. Unmount filesystem
+# <at this stage TESTFS is empty again and unfrozen, and the
+# intent log contains a complete set of deltas to replay it>
+# 6. Remount TESTFS <which replays the intent log>
+# 7. Compare TESTFS against the TESTDIR copy
+#
+
+verify_runnable "global"
+
+log_assert "Replay of intent log succeeds."
+log_onexit cleanup
+
+#
+# 1. Create an empty file system (TESTFS)
+#
+log_must $ZPOOL create $TESTPOOL $VDEV log mirror $LDEV
+log_must $ZFS set compression=on $TESTPOOL
+log_must $ZFS create $TESTPOOL/$TESTFS
+log_must $MKDIR -p $TESTDIR
+
+#
+# This dd command works around an issue where ZIL records aren't created
+# after freezing the pool unless a ZIL header already exists. Create a file
+# synchronously to force ZFS to write one out.
+#
+log_must $GNUDD if=/dev/zero of=/$TESTPOOL/$TESTFS/sync \
+ conv=fdatasync,fsync bs=1 count=1
+
+#
+# 2. Freeze TESTFS
+#
+log_must $ZPOOL freeze $TESTPOOL
+
+#
+# 3. Run various user commands that create files, directories and ACLs
+#
+
+# TX_CREATE
+log_must touch /$TESTPOOL/$TESTFS/a
+
+# TX_RENAME
+log_must mv /$TESTPOOL/$TESTFS/a /$TESTPOOL/$TESTFS/b
+
+# TX_SYMLINK
+log_must touch /$TESTPOOL/$TESTFS/c
+log_must ln -s /$TESTPOOL/$TESTFS/c /$TESTPOOL/$TESTFS/d
+
+# TX_LINK
+log_must touch /$TESTPOOL/$TESTFS/e
+log_must ln /$TESTPOOL/$TESTFS/e /$TESTPOOL/$TESTFS/f
+
+# TX_MKDIR
+log_must mkdir /$TESTPOOL/$TESTFS/dir_to_delete
+
+# TX_RMDIR
+log_must rmdir /$TESTPOOL/$TESTFS/dir_to_delete
+
+# Create a simple validation payload
+log_must $DD if=/dev/urandom of=/$TESTPOOL/$TESTFS/payload bs=1k count=8
+CHECKSUM_BEFORE=$(sha256sum -b /$TESTPOOL/$TESTFS/payload)
+
+# TX_WRITE (small file with ordering)
+log_must $MKFILE 1k /$TESTPOOL/$TESTFS/small_file
+log_must $MKFILE 512b /$TESTPOOL/$TESTFS/small_file
+
+# TX_CREATE, TX_MKDIR, TX_REMOVE, TX_RMDIR
+log_must cp -R /usr/share/dict /$TESTPOOL/$TESTFS
+log_must rm -rf /$TESTPOOL/$TESTFS/dict
+
+# TX_SETATTR
+log_must touch /$TESTPOOL/$TESTFS/setattr
+log_must chmod 567 /$TESTPOOL/$TESTFS/setattr
+log_must chgrp root /$TESTPOOL/$TESTFS/setattr
+log_must touch -cm -t 201311271200 /$TESTPOOL/$TESTFS/setattr
+
+# TX_TRUNCATE (to zero)
+log_must $MKFILE 4k /$TESTPOOL/$TESTFS/truncated_file
+log_must $TRUNCATE -s 0 /$TESTPOOL/$TESTFS/truncated_file
+
+# TX_WRITE (large file)
+log_must $DD if=/dev/urandom of=/$TESTPOOL/$TESTFS/large \
+ bs=128k count=64 oflag=sync
+
+# Write zeroes, which compresss to holes, in the middle of a file
+log_must $DD if=/dev/urandom of=/$TESTPOOL/$TESTFS/holes.1 bs=128k count=8
+log_must $DD if=/dev/zero of=/$TESTPOOL/$TESTFS/holes.1 bs=128k count=2
+
+log_must $DD if=/dev/urandom of=/$TESTPOOL/$TESTFS/holes.2 bs=128k count=8
+log_must $DD if=/dev/zero of=/$TESTPOOL/$TESTFS/holes.2 bs=128k count=2 seek=2
+
+log_must $DD if=/dev/urandom of=/$TESTPOOL/$TESTFS/holes.3 bs=128k count=8
+log_must $DD if=/dev/zero of=/$TESTPOOL/$TESTFS/holes.3 bs=128k count=2 \
+ seek=2 conv=notrunc
+
+# TX_MKXATTR
+log_must $MKDIR /$TESTPOOL/$TESTFS/xattr.dir
+log_must attr -qs fileattr -V HelloWorld /$TESTPOOL/$TESTFS/xattr.dir
+log_must attr -qs tmpattr -V HelloWorld /$TESTPOOL/$TESTFS/xattr.dir
+log_must attr -qr tmpattr /$TESTPOOL/$TESTFS/xattr.dir
+
+log_must touch /$TESTPOOL/$TESTFS/xattr.file
+log_must attr -qs fileattr -V HelloWorld /$TESTPOOL/$TESTFS/xattr.file
+log_must attr -qs tmpattr -V HelloWorld /$TESTPOOL/$TESTFS/xattr.file
+log_must attr -qr tmpattr /$TESTPOOL/$TESTFS/xattr.file
+
+#
+# 4. Copy TESTFS to temporary location (TESTDIR)
+#
+log_must cp -a /$TESTPOOL/$TESTFS/* $TESTDIR
+
+#
+# 5. Unmount filesystem and export the pool
+#
+# At this stage TESTFS is empty again and unfrozen, and the
+# intent log contains a complete set of deltas to replay it.
+#
+log_must $ZFS unmount /$TESTPOOL/$TESTFS
+
+log_note "Verify transactions to replay:"
+log_must $ZDB -iv $TESTPOOL/$TESTFS
+
+log_must $ZPOOL export $TESTPOOL
+
+#
+# 6. Remount TESTFS <which replays the intent log>
+#
+# Import the pool to unfreeze it and claim log blocks. It has to be
+# `zpool import -f` because we can't write a frozen pool's labels!
+#
+log_must $ZPOOL import -f -d $VDIR $TESTPOOL
+
+#
+# 7. Compare TESTFS against the TESTDIR copy
+#
+log_note "Verify current block usage:"
+log_must $ZDB -bcv $TESTPOOL
+
+log_note "Verify copy of xattrs:"
+log_must attr -l /$TESTPOOL/$TESTFS/xattr.dir
+log_must attr -l /$TESTPOOL/$TESTFS/xattr.file
+
+log_note "Verify working set diff:"
+log_must diff -r /$TESTPOOL/$TESTFS $TESTDIR >/dev/null || \
+ diff -r /$TESTPOOL/$TESTFS $TESTDIR
+
+log_note "Verify file checksum:"
+log_note "$CHECKSUM_BEFORE"
+log_must echo "$CHECKSUM_BEFORE" | sha256sum -c
+
+log_pass "Replay of intent log succeeds."
projects / mirror_zfs.git / commitdiff