use IO::Pipe;
use IO::File;
use IO::Dir;
+use IO::Handle;
use IPC::Open3;
use Fcntl qw(:DEFAULT :flock);
use base 'Exporter';
use Text::ParseWords;
use String::ShellQuote;
use Time::HiRes qw(usleep gettimeofday tv_interval alarm);
+use Net::DBus qw(dbus_uint32 dbus_uint64);
+use Net::DBus::Callback;
+use Net::DBus::Reactor;
# avoid warning when parsing long hex values with hex()
no warnings 'portable'; # Support for 64-bit ints required
trim
extract_param
file_copy
+O_PATH
+O_TMPFILE
);
my $pvelogdir = "/var/log/pve";
$cmdstr .= $pipe . join(' ', map { ref($_) ? $$_ : shellquote($_) } @$command);
$pipe = ' | ';
}
- $cmd = [ '/bin/bash', '-c', "set -o pipefail && $cmdstr" ];
+ $cmd = [ '/bin/bash', '-c', "$cmdstr" ];
} else {
$cmdstr = cmd2string($cmd);
}
};
my $kvmkeymaparray = [];
-foreach my $lc (keys %$keymaphash) {
+foreach my $lc (sort keys %$keymaphash) {
push @$kvmkeymaparray, $keymaphash->{$lc}->[1];
}
return $result;
}
+# support sending multi-part mail messages with a text and or a HTML part
+# mailto may be a single email string or an array of receivers
+sub sendmail {
+ my ($mailto, $subject, $text, $html, $mailfrom, $author) = @_;
+
+ $mailto = [ $mailto ] if !ref($mailto);
+
+ my $rcvrarg = '';
+ foreach my $r (@$mailto) {
+ $rcvrarg .= " '$r'";
+ }
+ my $rcvrtxt = join (', ', @$mailto);
+
+ $mailfrom = $mailfrom || "root";
+ $author = $author || 'Proxmox VE';
+
+ open (MAIL,"|sendmail -B 8BITMIME -f $mailfrom $rcvrarg") ||
+ die "unable to open 'sendmail' - $!";
+
+ # multipart spec see https://www.ietf.org/rfc/rfc1521.txt
+ my $boundary = "----_=_NextPart_001_".int(time).$$;
+
+ print MAIL "Content-Type: multipart/alternative;\n";
+ print MAIL "\tboundary=\"$boundary\"\n";
+ print MAIL "MIME-Version: 1.0\n";
+
+ print MAIL "FROM: $author <$mailfrom>\n";
+ print MAIL "TO: $rcvrtxt\n";
+ print MAIL "SUBJECT: $subject\n";
+ print MAIL "\n";
+ print MAIL "This is a multi-part message in MIME format.\n\n";
+ print MAIL "--$boundary\n";
+
+ if (defined($text)) {
+ print MAIL "Content-Type: text/plain;\n";
+ print MAIL "\tcharset=\"UTF8\"\n";
+ print MAIL "Content-Transfer-Encoding: 8bit\n";
+ print MAIL "\n";
+
+ # avoid 'remove extra line breaks' issue (MS Outlook)
+ my $fill = ' ';
+ $text =~ s/^/$fill/gm;
+
+ print MAIL $text;
+
+ print MAIL "\n--$boundary\n";
+ }
+
+ if (defined($html)) {
+ print MAIL "Content-Type: text/html;\n";
+ print MAIL "\tcharset=\"UTF8\"\n";
+ print MAIL "Content-Transfer-Encoding: 8bit\n";
+ print MAIL "\n";
+
+ print MAIL $html;
+
+ print MAIL "\n--$boundary--\n";
+ }
+
+ close(MAIL);
+}
+
sub tempfile {
my ($perm, %opts) = @_;
return ("/proc/$$/fd/".$fh->fileno, $fh);
}
+sub validate_ssh_public_keys {
+ my ($raw) = @_;
+ my @lines = split(/\n/, $raw);
+
+ foreach my $line (@lines) {
+ next if $line =~ m/^\s*$/;
+ eval {
+ my ($filename, $handle) = tempfile_contents($line);
+ run_command(["ssh-keygen", "-l", "-f", $filename],
+ outfunc => sub {}, errfunc => sub {});
+ };
+ die "SSH public key validation error\n" if $@;
+ }
+}
+
+sub openat($$$;$) {
+ my ($dirfd, $pathname, $flags, $mode) = @_;
+ my $fd = syscall(257, $dirfd, $pathname, $flags, $mode//0);
+ return undef if $fd < 0;
+ # sysopen() doesn't deal with numeric file descriptors apparently
+ # so we need to convert to a mode string for IO::Handle->new_from_fd
+ my $flagstr = ($flags & O_RDWR) ? 'rw' : ($flags & O_WRONLY) ? 'w' : 'r';
+ my $handle = IO::Handle->new_from_fd($fd, $flagstr);
+ return $handle if $handle;
+ my $err = $!; # save error before closing the raw fd
+ syscall(3, $fd); # close
+ $! = $err;
+ return undef;
+}
+
+sub mkdirat($$$) {
+ my ($dirfd, $name, $mode) = @_;
+ return syscall(258, $dirfd, $name, $mode) == 0;
+}
+
+# NOTE: This calls the dbus main loop and must not be used when another dbus
+# main loop is being used as we need to wait for the JobRemoved signal.
+# Polling the job status instead doesn't work because this doesn't give us the
+# distinction between success and failure.
+#
+# Note that the description is mandatory for security reasons.
+sub enter_systemd_scope {
+ my ($unit, $description, %extra) = @_;
+ die "missing description\n" if !defined($description);
+
+ my $timeout = delete $extra{timeout};
+
+ $unit .= '.scope';
+ my $properties = [ [PIDs => [dbus_uint32($$)]] ];
+
+ foreach my $key (keys %extra) {
+ if ($key eq 'Slice' || $key eq 'KillMode') {
+ push @$properties, [$key, $extra{$key}];
+ } elsif ($key eq 'CPUShares') {
+ push @$properties, [$key, dbus_uint64($extra{$key})];
+ } elsif ($key eq 'CPUQuota') {
+ push @$properties, ['CPUQuotaPerSecUSec',
+ dbus_uint64($extra{$key} * 10000)];
+ } else {
+ die "Don't know how to encode $key for systemd scope\n";
+ }
+ }
+
+ my $job;
+ my $done = 0;
+
+ my $bus = Net::DBus->system();
+ my $reactor = Net::DBus::Reactor->main();
+
+ my $service = $bus->get_service('org.freedesktop.systemd1');
+ my $if = $service->get_object('/org/freedesktop/systemd1', 'org.freedesktop.systemd1.Manager');
+ # Connect to the JobRemoved signal since we want to wait for it to finish
+ my $sigid;
+ my $timer;
+ my $cleanup = sub {
+ my ($no_shutdown) = @_;
+ $if->disconnect_from_signal('JobRemoved', $sigid) if defined($if);
+ $if = undef;
+ $sigid = undef;
+ $reactor->remove_timeout($timer) if defined($timer);
+ $timer = undef;
+ return if $no_shutdown;
+ $reactor->shutdown();
+ };
+
+ $sigid = $if->connect_to_signal('JobRemoved', sub {
+ my ($id, $removed_job, $signaled_unit, $result) = @_;
+ return if $signaled_unit ne $unit || $removed_job ne $job;
+ $cleanup->(0);
+ die "systemd job failed\n" if $result ne 'done';
+ $done = 1;
+ });
+
+ my $on_timeout = sub {
+ $cleanup->(0);
+ die "systemd job timed out\n";
+ };
+
+ $timer = $reactor->add_timeout($timeout * 1000, Net::DBus::Callback->new(method => $on_timeout))
+ if defined($timeout);
+ $job = $if->StartTransientUnit($unit, 'fail', $properties, []);
+ $reactor->run();
+ $cleanup->(1);
+ die "systemd job never completed\n" if !$done;
+}
+
1;