use IO::Select;
use File::Basename;
use File::Path qw(make_path);
+use Filesys::Df (); # don't overwrite our df()
+use IO::Pipe;
use IO::File;
use IO::Dir;
use IPC::Open3;
safe_print
trim
extract_param
+file_copy
);
my $pvelogdir = "/var/log/pve";
our $IPRE = "(?:$IPV4RE|$IPV6RE)";
-use constant (CLONE_NEWNS => 0x00020000,
+use constant {CLONE_NEWNS => 0x00020000,
CLONE_NEWUTS => 0x04000000,
CLONE_NEWIPC => 0x08000000,
CLONE_NEWUSER => 0x10000000,
CLONE_NEWPID => 0x20000000,
- CLONE_NEWNET => 0x40000000);
+ CLONE_NEWNET => 0x40000000};
+
+use constant {O_PATH => 0x00200000,
+ O_TMPFILE => 0x00410000}; # This includes O_DIRECTORY
sub run_with_timeout {
my ($timeout, $code, @param) = @_;
my $lock_func = sub {
if (!$lock_handles->{$$}->{$filename}) {
- $lock_handles->{$$}->{$filename} = new IO::File (">>$filename") ||
- die "can't open file - $!\n";
+ my $fh = new IO::File(">>$filename") ||
+ die "can't open file - $!\n";
+ $lock_handles->{$$}->{$filename} = { fh => $fh, refcount => 0};
}
- if (!flock ($lock_handles->{$$}->{$filename}, $mode|LOCK_NB)) {
- print STDERR "trying to aquire lock...";
+ if (!flock($lock_handles->{$$}->{$filename}->{fh}, $mode|LOCK_NB)) {
+ print STDERR "trying to acquire lock...";
my $success;
while(1) {
- $success = flock($lock_handles->{$$}->{$filename}, $mode);
+ $success = flock($lock_handles->{$$}->{$filename}->{fh}, $mode);
# try again on EINTR (see bug #273)
if ($success || ($! != EINTR)) {
last;
}
if (!$success) {
print STDERR " failed\n";
- die "can't aquire lock - $!\n";
+ die "can't acquire lock '$filename' - $!\n";
}
print STDERR " OK\n";
}
+ $lock_handles->{$$}->{$filename}->{refcount}++;
};
my $res;
$err = $@;
}
- if (my $fh = $lock_handles->{$$}->{$filename}) {
- $lock_handles->{$$}->{$filename} = undef;
- close ($fh);
+ if (my $fh = $lock_handles->{$$}->{$filename}->{fh}) {
+ my $refcount = --$lock_handles->{$$}->{$filename}->{refcount};
+ if ($refcount <= 0) {
+ $lock_handles->{$$}->{$filename} = undef;
+ close ($fh);
+ }
}
if ($err) {
return $content;
}
+sub file_copy {
+ my ($filename, $dst, $max, $perm) = @_;
+
+ file_set_contents ($dst, file_get_contents($filename, $max), $perm);
+}
+
sub file_read_firstline {
my ($filename) = @_;
my $timeout;
my $oldtimeout;
my $pid;
+ my $exitcode;
my $outfunc;
my $errfunc;
my $input;
my $output;
my $afterfork;
+ my $noerr;
eval {
$logfunc = $param{$p};
} elsif ($p eq 'afterfork') {
$afterfork = $param{$p};
+ } elsif ($p eq 'noerr') {
+ $noerr = $param{$p};
} else {
die "got unknown parameter '$p' for run_command\n";
}
die "failed to execute\n";
} elsif (my $sig = ($? & 127)) {
die "got signal $sig\n";
- } elsif (my $ec = ($? >> 8)) {
- if (!($ec == 24 && ($cmdstr =~ m|^(\S+/)?rsync\s|))) {
+ } elsif ($exitcode = ($? >> 8)) {
+ if (!($exitcode == 24 && ($cmdstr =~ m|^(\S+/)?rsync\s|))) {
if ($errmsg && $laststderr) {
my $lerr = $laststderr;
$laststderr = undef;
die "$lerr\n";
}
- die "exit code $ec\n";
+ die "exit code $exitcode\n";
}
}
if ($errmsg) {
$err =~ s/^usermod:\s*// if $cmdstr =~ m|^(\S+/)?usermod\s|;
die "$errmsg: $err";
- } else {
+ } elsif(!$noerr) {
die "command '$cmdstr' failed: $err";
}
}
- return undef;
+ return $exitcode;
}
sub split_list {
};
my $kvmkeymaparray = [];
-foreach my $lc (keys %$keymaphash) {
+foreach my $lc (sort keys %$keymaphash) {
push @$kvmkeymaparray, $keymaphash->{$lc}->[1];
}
# NOTE: NFS syscall can't be interrupted, so alarm does
# not work to provide timeouts.
# from 'man nfs': "Only SIGKILL can interrupt a pending NFS operation"
-# So the spawn external 'df' process instead of using
-# Filesys::Df (which uses statfs syscall)
+# So fork() before using Filesys::Df
sub df {
my ($path, $timeout) = @_;
- my $cmd = [ 'df', '-P', '-B', '1', $path];
-
my $res = {
total => 0,
used => 0,
avail => 0,
};
- my $parser = sub {
- my $line = shift;
- if (my ($fsid, $total, $used, $avail) = $line =~
- m/^(\S+.*)\s+(\d+)\s+(\d+)\s+(\d+)\s+\d+%\s.*$/) {
- $res = {
- total => $total,
- used => $used,
- avail => $avail,
- };
+ my $pipe = IO::Pipe->new();
+ my $child = fork();
+ if (!defined($child)) {
+ warn "fork failed: $!\n";
+ return $res;
+ }
+
+ if (!$child) {
+ $pipe->writer();
+ eval {
+ my $df = Filesys::Df::df($path, 1);
+ print {$pipe} "$df->{blocks}\n$df->{used}\n$df->{bavail}\n";
+ $pipe->close();
+ };
+ if (my $err = $@) {
+ warn $err;
+ POSIX::_exit(1);
}
+ POSIX::_exit(0);
+ }
+
+ $pipe->reader();
+
+ my $readvalues = sub {
+ $res->{total} = int(<$pipe>);
+ $res->{used} = int(<$pipe>);
+ $res->{avail} = int(<$pipe>);
+ };
+ eval {
+ run_with_timeout($timeout, $readvalues);
};
- eval { run_command($cmd, timeout => $timeout, outfunc => $parser); };
warn $@ if $@;
-
+ $pipe->close();
+ kill('KILL', $child);
+ waitpid($child, 0);
return $res;
}
my $rand = Digest::SHA::sha1_hex($$, rand(), $seconds, $microseconds);
-# clear multicast, set local id
+ # clear multicast, set local id
vec($rand, 0, 8) = (vec($rand, 0, 8) & 0xfe) | 2;
- my $mac = sprintf("%02X:" x 6, unpack("C6", $rand));
-
-# remove superfluous ":" at end
- chop($mac);
-
- return $mac;
+ return sprintf("%02X:%02X:%02X:%02X:%02X:%02X", unpack("C6", $rand));
}
sub shellquote {
}
sub dump_journal {
- my ($start, $limit, $filter) = @_;
+ my ($start, $limit, $since, $until) = @_;
my $lines = [];
my $count = 0;
};
my $cmd = ['journalctl', '-o', 'short', '--no-pager'];
+
+ push @$cmd, '--since', $since if $since;
+ push @$cmd, '--until', $until if $until;
run_command($cmd, outfunc => $parser);
# HACK: ExtJS store.guaranteeRange() does not like empty array
return; # nothing
}
-sub unshare {
+sub unshare($) {
my ($flags) = @_;
- syscall 272, $flags;
+ return 0 == syscall(272, $flags);
+}
+
+sub setns($$) {
+ my ($fileno, $nstype) = @_;
+ return 0 == syscall(308, $fileno, $nstype);
+}
+
+sub syncfs($) {
+ my ($fileno) = @_;
+ return 0 == syscall(306, $fileno);
+}
+
+sub sync_mountpoint {
+ my ($path) = @_;
+ sysopen my $fd, $path, O_PATH or die "failed to open $path: $!\n";
+ my $result = syncfs(fileno($fd));
+ close($fd);
+ return $result;
+}
+
+# support sending multi-part mail messages with a text and or a HTML part
+# mailto may be a single email string or an array of receivers
+sub sendmail {
+ my ($mailto, $subject, $text, $html, $mailfrom, $author) = @_;
+
+ $mailto = [ $mailto ] if !ref($mailto);
+
+ my $rcvrarg = '';
+ foreach my $r (@$mailto) {
+ $rcvrarg .= " '$r'";
+ }
+ my $rcvrtxt = join (', ', @$mailto);
+
+ $mailfrom = $mailfrom || "root";
+ $author = $author || 'Proxmox VE';
+
+ open (MAIL,"|sendmail -B 8BITMIME -f $mailfrom $rcvrarg") ||
+ die "unable to open 'sendmail' - $!";
+
+ # multipart spec see https://www.ietf.org/rfc/rfc1521.txt
+ my $boundary = "----_=_NextPart_001_".int(time).$$;
+
+ print MAIL "Content-Type: multipart/alternative;\n";
+ print MAIL "\tboundary=\"$boundary\"\n";
+ print MAIL "MIME-Version: 1.0\n";
+
+ print MAIL "FROM: $author <$mailfrom>\n";
+ print MAIL "TO: $rcvrtxt\n";
+ print MAIL "SUBJECT: $subject\n";
+ print MAIL "\n";
+ print MAIL "This is a multi-part message in MIME format.\n\n";
+ print MAIL "--$boundary\n";
+
+ if (defined($text)) {
+ print MAIL "Content-Type: text/plain;\n";
+ print MAIL "\tcharset=\"UTF8\"\n";
+ print MAIL "Content-Transfer-Encoding: 8bit\n";
+ print MAIL "\n";
+
+ # avoid 'remove extra line breaks' issue (MS Outlook)
+ my $fill = ' ';
+ $text =~ s/^/$fill/gm;
+
+ print MAIL $text;
+
+ print MAIL "\n--$boundary\n";
+ }
+
+ if (defined($html)) {
+ print MAIL "Content-Type: text/html;\n";
+ print MAIL "\tcharset=\"UTF8\"\n";
+ print MAIL "Content-Transfer-Encoding: 8bit\n";
+ print MAIL "\n";
+
+ print MAIL $html;
+
+ print MAIL "\n--$boundary--\n";
+ }
+
+ close(MAIL);
+}
+
+sub tempfile {
+ my ($perm, %opts) = @_;
+
+ # default permissions are stricter than with file_set_contents
+ $perm = 0600 if !defined($perm);
+
+ my $dir = $opts{dir} // '/tmp';
+ my $mode = $opts{mode} // O_RDWR;
+ $mode |= O_EXCL if !$opts{allow_links};
+
+ my $fh = IO::File->new($dir, $mode | O_TMPFILE, $perm)
+ or die "failed to create tempfile: $!\n";
+ return $fh;
+}
+
+sub tempfile_contents {
+ my ($data, $perm, %opts) = @_;
+
+ my $fh = tempfile($perm, %opts);
+ eval {
+ die "unable to write to tempfile: $!\n" if !print {$fh} $data;
+ die "unable to flush to tempfile: $!\n" if !defined($fh->flush());
+ };
+ if (my $err = $@) {
+ close $fh;
+ die $err;
+ }
+
+ return ("/proc/$$/fd/".$fh->fileno, $fh);
+}
+
+sub validate_ssh_public_keys {
+ my ($raw) = @_;
+ my @lines = split(/\n/, $raw);
+
+ foreach my $line (@lines) {
+ next if $line =~ m/^\s*$/;
+ eval {
+ my ($filename, $handle) = tempfile_contents($line);
+ run_command(["ssh-keygen", "-l", "-f", $filename],
+ outfunc => sub {}, errfunc => sub {});
+ };
+ die "SSH public key validation error\n" if $@;
+ }
}
1;