pbs: fix password and encryption key file location

[pve-docs.git] / pvesr.adoc

[[chapter_pvesr]]
ifdef::manvolnum[]
pvesr(1)
========
:pve-toplevel:

NAME
----

pvesr - Proxmox VE Storage Replication

SYNOPSIS
--------

include::pvesr.1-synopsis.adoc[]

DESCRIPTION
-----------
endif::manvolnum[]

ifndef::manvolnum[]
Storage Replication
===================
:pve-toplevel:
endif::manvolnum[]

The `pvesr` command line tool manages the {PVE} storage replication
framework. Storage replication brings redundancy for guests using
local storage and reduces migration time.

It replicates guest volumes to another node so that all data is available
without using shared storage. Replication uses snapshots to minimize traffic
sent over the network. Therefore, new data is sent only incrementally after
the initial full sync. In the case of a node failure, your guest data is
still available on the replicated node.

The replication is done automatically in configurable intervals.
The minimum replication interval is one minute, and the maximal interval
once a week. The format used to specify those intervals is a subset of
`systemd` calendar events, see
xref:pvesr_schedule_time_format[Schedule Format] section:

It is possible to replicate a guest to multiple target nodes,
but not twice to the same target node.

Each replications bandwidth can be limited, to avoid overloading a storage
or server.

Guests with replication enabled can currently only be migrated offline.
Only changes since the last replication (so-called `deltas`) need to be
transferred if the guest is migrated to a node to which it already is
replicated. This reduces the time needed significantly. The replication
direction automatically switches if you migrate a guest to the replication
target node.

For example: VM100 is currently on `nodeA` and gets replicated to `nodeB`.
You migrate it to `nodeB`, so now it gets automatically replicated back from
`nodeB` to `nodeA`.

If you migrate to a node where the guest is not replicated, the whole disk
data must send over. After the migration, the replication job continues to
replicate this guest to the configured nodes.

[IMPORTANT]
====
High-Availability is allowed in combination with storage replication, but it
has the following implications:

* as live-migrations are currently not possible, redistributing services after
  a more preferred node comes online does not work. Keep that in mind when
  configuring your HA groups and their priorities for replicated guests.

* recovery works, but there may be some data loss between the last synced
  time and the time a node failed.
====

Supported Storage Types
-----------------------

.Storage Types
[width="100%",options="header"]
|============================================
|Description    |PVE type    |Snapshots|Stable
|ZFS (local)    |zfspool     |yes      |yes
|============================================

[[pvesr_schedule_time_format]]
Schedule Format
---------------

{pve} has a very flexible replication scheduler. It is based on the systemd
time calendar event format.footnote:[see `man 7 systemd.time` for more information]
Calendar events may be used to refer to one or more points in time in a
single expression.

Such a calendar event uses the following format:

----
[day(s)] [[start-time(s)][/repetition-time(s)]]
----

This format allows you to configure a set of days on which the job should run.
You can also set one or more start times. It tells the replication scheduler
the moments in time when a job should start.
With this information we, can create a job which runs every workday at 10
PM: `'mon,tue,wed,thu,fri 22'` which could be abbreviated to: `'mon..fri
22'`, most reasonable schedules can be written quite intuitive this way.

NOTE: Hours are formatted in 24-hour format.

To allow a convenient and shorter configuration, one or more repeat times per
guest can be set. They indicate that replications are done on the start-time(s)
itself and the start-time(s) plus all multiples of the repetition value. If
you want to start replication at 8 AM and repeat it every 15 minutes until
9 AM you would use: `'8:00/15'`

Here you see that if no hour separation (`:`), is used the value gets
interpreted as minute. If such a separation is used, the value on the left
denotes the hour(s), and the value on the right denotes the minute(s).
Further, you can use `*` to match all possible values.

To get additional ideas look at
xref:pvesr_schedule_format_examples[more Examples below].

Detailed Specification
~~~~~~~~~~~~~~~~~~~~~~

days:: Days are specified with an abbreviated English version: `sun, mon,
tue, wed, thu, fri and sat`. You may use multiple days as a comma-separated
list. A range of days can also be set by specifying the start and end day
separated by ``..'', for example `mon..fri`. These formats can be mixed.
If omitted `'*'` is assumed.

time-format:: A time format consists of hours and minutes interval lists.
Hours and minutes are separated by `':'`. Both hour and minute can be list
and ranges of values, using the same format as days.
First are hours, then minutes. Hours can be omitted if not needed. In this
case `'*'` is assumed for the value of hours.
The valid range for values is `0-23` for hours and `0-59` for minutes.

[[pvesr_schedule_format_examples]]
Examples:
~~~~~~~~~

.Schedule Examples
[width="100%",options="header"]
|==============================================================================
|Schedule String        |Alternative            |Meaning
|mon,tue,wed,thu,fri    |mon..fri               |Every working day at 0:00
|sat,sun                |sat..sun               |Only on weekends at 0:00
|mon,wed,fri            |--                     |Only on Monday, Wednesday and Friday at 0:00
|12:05                  |12:05                  |Every day at 12:05 PM
|*/5                    |0/5                    |Every five minutes
|mon..wed 30/10         |mon,tue,wed 30/10      |Monday, Tuesday, Wednesday 30, 40 and 50 minutes after every full hour
|mon..fri 8..17,22:0/15 |--                     |Every working day every 15 minutes between 8 AM and 6 PM and between 10 PM and 11 PM
|fri 12..13:5/20        |fri 12,13:5/20         |Friday at 12:05, 12:25, 12:45, 13:05, 13:25 and 13:45
|12,14,16,18,20,22:5    |12/2:5                 |Every day starting at 12:05 until 22:05, every 2 hours
|*                      |*/1                    |Every minute (minimum interval)
|==============================================================================

Error Handling
--------------

If a replication job encounters problems, it is placed in an error state.
In this state, the configured replication intervals get suspended
temporarily. The failed replication is repeatedly tried again in a
30 minute interval.
Once this succeeds, the original schedule gets activated again.

Possible issues
~~~~~~~~~~~~~~~

Some of the most common issues are in the following list. Depending on your
setup there may be another cause.

* Network is not working.

* No free space left on the replication target storage.

* Storage with same storage ID available on the target node

NOTE: You can always use the replication log to find out what is causing the problem.

Migrating a guest in case of Error
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
// FIXME: move this to better fitting chapter (sysadmin ?) and only link to
// it here

In the case of a grave error, a virtual guest may get stuck on a failed
node. You then need to move it manually to a working node again.

Example
~~~~~~~

Let's assume that you have two guests (VM 100 and CT 200) running on node A
and replicate to node B.
Node A failed and can not get back online. Now you have to migrate the guest
to Node B manually.

- connect to node B over ssh or open its shell via the WebUI

- check if that the cluster is quorate
+
----
# pvecm status
----

- If you have no quorum, we strongly advise to fix this first and make the
  node operable again. Only if this is not possible at the moment, you may
  use the following command to enforce quorum on the current node:
+
----
# pvecm expected 1
----

WARNING: Avoid changes which affect the cluster if `expected votes` are set
(for example adding/removing nodes, storages, virtual guests) at all costs.
Only use it to get vital guests up and running again or to resolve the quorum
issue itself.

- move both guest configuration files form the origin node A to node B:
+
----
# mv /etc/pve/nodes/A/qemu-server/100.conf /etc/pve/nodes/B/qemu-server/100.conf
# mv /etc/pve/nodes/A/lxc/200.conf /etc/pve/nodes/B/lxc/200.conf
----

- Now you can start the guests again:
+
----
# qm start 100
# pct start 200
----

Remember to replace the VMIDs and node names with your respective values.

Managing Jobs
-------------

[thumbnail="screenshot/gui-qemu-add-replication-job.png"]

You can use the web GUI to create, modify, and remove replication jobs
easily. Additionally, the command line interface (CLI) tool `pvesr` can be
used to do this.

You can find the replication panel on all levels (datacenter, node, virtual
guest) in the web GUI. They differ in which jobs get shown:
all, node- or guest-specific jobs.

When adding a new job, you need to specify the guest if not already selected
as well as the target node. The replication
xref:pvesr_schedule_time_format[schedule] can be set if the default of `all
15 minutes` is not desired. You may impose a rate-limit on a replication
job. The rate limit can help to keep the load on the storage acceptable.

A replication job is identified by a cluster-wide unique ID. This ID is
composed of the VMID in addition to a job number.
This ID must only be specified manually if the CLI tool is used.


Command Line Interface Examples
-------------------------------

Create a replication job which runs every 5 minutes with a limited bandwidth
of 10 Mbps (megabytes per second) for the guest with ID 100.

----
# pvesr create-local-job 100-0 pve1 --schedule "*/5" --rate 10
----

Disable an active job with ID `100-0`.

----
# pvesr disable 100-0
----

Enable a deactivated job with ID `100-0`.

----
# pvesr enable 100-0
----

Change the schedule interval of the job with ID `100-0` to once per hour.

----
# pvesr update 100-0 --schedule '*/00'
----

ifdef::manvolnum[]
include::pve-copyright.adoc[]
endif::manvolnum[]