vxlan : remove vlanaware bridge documentation

[pve-docs.git] / pct.conf.5-opts.adoc

diff --git a/pct.conf.5-opts.adoc b/pct.conf.5-opts.adoc
index 793b3e70e0d8040b054c1b8fc14d09d3ff94cc89..fbced2d747db41ac22e133abacf374a2a04c22fb 100644 (file)
--- a/pct.conf.5-opts.adoc
+++ b/pct.conf.5-opts.adoc
@@ -42,7 +42,7 @@ Lock/unlock the VM.
 
 Amount of RAM for the VM in MB.
 
-`mp[n]`: `[volume=]<volume> ,mp=<Path> [,acl=<1|0>] [,backup=<1|0>] [,quota=<1|0>] [,ro=<1|0>] [,shared=<1|0>] [,size=<DiskSize>]` ::
+`mp[n]`: `[volume=]<volume> ,mp=<Path> [,acl=<1|0>] [,backup=<1|0>] [,quota=<1|0>] [,replicate=<1|0>] [,ro=<1|0>] [,shared=<1|0>] [,size=<DiskSize>]` ::
 
 Use volume as container mount point.
 
@@ -64,6 +64,10 @@ NOTE: Must not contain any symlinks for security reasons.
 
 Enable user quotas inside the container (not supported with zfs subvolumes)
 
+`replicate`=`<boolean>` ('default =' `1`);;
+
+Will include this volume to a storage replica job.
+
 `ro`=`<boolean>` ;;
 
 Read-only mount point
@@ -86,7 +90,7 @@ Volume, device or directory to mount into the container.
 
 Sets DNS server IP address for a container. Create will automatically use the setting from the host if you neither set searchdomain nor nameserver.
 
-`net[n]`: `name=<string> [,bridge=<bridge>] [,firewall=<1|0>] [,gw=<GatewayIPv4>] [,gw6=<GatewayIPv6>] [,hwaddr=<XX:XX:XX:XX:XX:XX>] [,ip=<IPv4Format/CIDR>] [,ip6=<IPv6Format/CIDR>] [,mtu=<integer>] [,rate=<mbps>] [,tag=<integer>] [,trunks=<vlanid[;vlanid...]>] [,type=<veth>]` ::
+`net[n]`: `name=<string> [,bridge=<bridge>] [,firewall=<1|0>] [,gw=<GatewayIPv4>] [,gw6=<GatewayIPv6>] [,hwaddr=<XX:XX:XX:XX:XX:XX>] [,ip=<(IPv4/CIDR|dhcp|manual)>] [,ip6=<(IPv6/CIDR|auto|dhcp|manual)>] [,mtu=<integer>] [,rate=<mbps>] [,tag=<integer>] [,trunks=<vlanid[;vlanid...]>] [,type=<veth>]` ::
 
 Specifies network interfaces for the container.
 
@@ -110,11 +114,11 @@ Default gateway for IPv6 traffic.
 
 The interface MAC address. This is dynamically allocated by default, but you can set that statically if needed, for example to always have the same link-local IPv6 address. (lxc.network.hwaddr)
 
-`ip`=`<IPv4Format/CIDR>` ;;
+`ip`=`<(IPv4/CIDR|dhcp|manual)>` ;;
 
 IPv4 address in CIDR format.
 
-`ip6`=`<IPv6Format/CIDR>` ;;
+`ip6`=`<(IPv6/CIDR|auto|dhcp|manual)>` ;;
 
 IPv6 address in CIDR format.
 
@@ -154,7 +158,7 @@ OS type. This is used to setup configuration inside the container, and correspon
 
 Sets the protection flag of the container. This will prevent the CT or CT's disk remove/update operation.
 
-`rootfs`: `[volume=]<volume> [,acl=<1|0>] [,quota=<1|0>] [,ro=<1|0>] [,shared=<1|0>] [,size=<DiskSize>]` ::
+`rootfs`: `[volume=]<volume> [,acl=<1|0>] [,quota=<1|0>] [,replicate=<1|0>] [,ro=<1|0>] [,shared=<1|0>] [,size=<DiskSize>]` ::
 
 Use volume as container root.
 
@@ -166,6 +170,10 @@ Explicitly enable or disable ACL support.
 
 Enable user quotas inside the container (not supported with zfs subvolumes)
 
+`replicate`=`<boolean>` ('default =' `1`);;
+
+Will include this volume to a storage replica job.
+
 `ro`=`<boolean>` ;;
 
 Read-only mount point